- Alsa-devel - mailman.alsa-project.org

[GIT PULL] ASoC fixes for v6.13-rc1
by Mark Brown 05 Dec '24

05 Dec '24

The following changes since commit 40384c840ea1944d7c5a392e8975ed088ecf0b37: Linux 6.13-rc1 (2024-12-01 14:28:56 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.13-rc1 for you to fetch changes up to ec16a3cdf37e507013062f9c4a2067eacdd12b62: ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec (2024-12-05 13:39:58 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.13 A few small fixes for v6.13, all system specific - the biggest thing is the fix for jack handling over suspend on some Intel laptops. ---------------------------------------------------------------- Dan Carpenter (1): ASoC: SOF: ipc3-topology: fix resource leaks in sof_ipc3_widget_setup_comp_dai() Marek Maslanka (1): ASoC: Intel: avs: da7219: Remove suspend_pre() and resume_post() Nícolas F. R. A. Prado (1): ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec sound/soc/intel/avs/boards/da7219.c | 17 ----------------- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 4 +--- sound/soc/sof/ipc3-topology.c | 7 ++++--- 3 files changed, 5 insertions(+), 23 deletions(-)

2 1

With SOF enabled in sof-hda-generic.tplg device (no DMIC) the control 'Capture Source' is not controlled by UCM
by GitHub issues - edited 05 Dec '24

05 Dec '24

alsa-project/alsa-ucm-conf issue #484 was edited from singalsu: The configuration is not usual. If there is no DMIC in the system usually the legacy mode is selected (as with `options snd_intel_dspcfg dsp_driver=1`). In such PCs SOF can be enabled with `options snd_intel_dspcfg dsp_driver=3`. When a headset is plugged/unplugged the playback correctly switches between speaker and headphone/headset earbuds. But the microphone capture remains muted. I noticed with legacy mode where internal microphones work that control name='Capture Source' changes to 1 when headset is removed: ``` singalsu@asteri:~$ amixer -c0 cget name='Capture Source' numid=6,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Headset Mic' ; Item #1 'Internal Mic' : values=1 singalsu@asteri:~$ amixer -c0 cget name='Capture Source' numid=6,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Headset Mic' ; Item #1 'Internal Mic' : values=0 ``` This is not happening when SOF is enabled. But I could make internal microphones capture work with `amixer -c0 cset name='Capture Source' 1`. Is there a way to fix this in ucm2? I'm not absolutely sure about this issue in Fedora 41 but this happens with my ucm2 development code with plain git master branch (commit 0782bf435b8332833e7b3fc91501d78473dd6edf). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/484 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

With SOF enabled in sof-hda-generic.tplg device (no DMIC) the control 'Capture Source' is not controlled by UCM
by GitHub issues - opened 05 Dec '24

05 Dec '24

alsa-project/alsa-ucm-conf issue #484 was opened from singalsu: The configuration is not usual. If there is no DMIC in the system usually the legacy mode is selected (as with `options snd_intel_dspcfg dsp_driver=1`). In such PCs SOF can be enabled with `options snd_intel_dspcfg dsp_driver=3`. When a headset is plugged/unplugged the playback correctly switches between speaker and headphone/headset earbuds. But the microphone capture remains muted. I noticed with legacy mode where internal microphones work that control name='Capture Source' changes to 1 when headset is removed: ``` singalsu@asteri:~$ amixer -c0 cget name='Capture Source' numid=6,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Headset Mic' ; Item #1 'Internal Mic' : values=1 singalsu@asteri:~$ amixer -c0 cget name='Capture Source' numid=6,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Headset Mic' ; Item #1 'Internal Mic' : values=0 ``` This is not happening when SOF is enabled. But I could make internal microphones capture work with `amixer -c0 cset name='Capture Source' 1`. Is there a way to fix this in ucm2? I'm not absolutely sure about this issue in Fedora 41 but this happens with my modified ucm2 development code with git master branch. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/484 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

scsi: aic7xxx: Fix build 'aicasm' warning
by wangdicheng 05 Dec '24

05 Dec '24

1 0

aplay doesn't play audio sometimes "unable to open slave"
by GitHub issues - opened 05 Dec '24

05 Dec '24

alsa-project/alsa-lib issue #426 was opened from haoyi-codes: I have initially thought it was a bug that was related to chromium as stated in #425. However, now I realize it has to be something else that is wrong. `aplay -D default /dev/zero` ``` ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.13/work/alsa-lib-1.2.13/src/pcm/pcm_dmix.c:1000:(snd_pcm_dmix_open) unable to open slave aplay: main:850: audio open error: No such file or directory ``` `aplay -D plughw:0 /dev/zero` ``` aplay: main:850: audio open error: No such file or directory ``` `aplay -l` ``` **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: Generic Digital [Generic Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: Generic Digital [Generic Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Audio [SA9123 USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` `cat /proc/asound/cards` ``` 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0x81080000 irq 17 1 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0x81220000 irq 165 2 [Audio ]: USB-Audio - SA9123 USB Audio SYC SA9123 USB Audio at usb-0000:00:14.0-3.2, full speed 3 [Edition ]: USB-Audio - Logi 4K Stream Edition Logi 4K Stream Edition at usb-0000:00:14.0-3.3, super speed ``` `ls -la /dev/snd/*` ``` crw-rw----+ 1 root audio 116, 0 Dec 4 23:18 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 32 Dec 4 23:18 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 64 Dec 4 23:18 /dev/snd/controlC2 crw-rw----+ 1 root audio 116, 96 Dec 4 23:18 /dev/snd/controlC3 crw-rw----+ 1 root audio 116, 19 Dec 4 23:18 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 51 Dec 4 23:18 /dev/snd/pcmC1D3p crw-rw----+ 1 root audio 116, 80 Dec 4 23:18 /dev/snd/pcmC2D0p crw-rw----+ 1 root audio 116, 120 Dec 4 23:18 /dev/snd/pcmC3D0c crw-rw----+ 1 root audio 116, 1 Dec 4 23:18 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Dec 4 23:18 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 80 Dec 4 23:18 . drwxr-xr-x 4 root root 280 Dec 4 23:17 .. lrwxrwxrwx 1 root root 12 Dec 4 23:18 usb-046d_Logi_4K_Stream_Edition_51C07EAF-03 -> ../controlC3 lrwxrwxrwx 1 root root 12 Dec 4 23:18 usb-SYC_SA9123_USB_Audio-01 -> ../controlC2 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 160 Dec 4 23:18 . drwxr-xr-x 4 root root 280 Dec 4 23:17 .. lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:00:14.0-usb-0:3.2:1.1 -> ../controlC2 lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:00:14.0-usb-0:3.3:1.3 -> ../controlC3 lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:00:14.0-usbv2-0:3.2:1.1 -> ../controlC2 lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:00:14.0-usbv3-0:3.3:1.3 -> ../controlC3 lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:01:00.1 -> ../controlC0 lrwxrwxrwx 1 root root 12 Dec 4 23:18 pci-0000:05:00.1 -> ../controlC1 ``` For reference I am still able to play audio on my system as pulseaudio is running but for applications that use alsa directly it does not work. ``` Server String: /run/user/1011/pulse/native Library Protocol Version: 35 Server Protocol Version: 35 Is Local: yes Client Index: 59 Tile Size: 65472 User Name: user Host Name: system Server Name: PulseAudio (on PipeWire 1.2.7) Server Version: 15.0.0 Default Sample Specification: float32le 2ch 48000Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.usb-SYC_SA9123_USB_Audio-01.iec958-stereo Default Source: alsa_output.usb-SYC_SA9123_USB_Audio-01.iec958-stereo.monitor Cookie: XXXX:XXXX ``` Issue URL : https://github.com/alsa-project/alsa-lib/issues/426 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

pulseaudio bails out on 1.2.13 (SIGSEGV), with MOTU Ultralite mk5
by GitHub issues - opened 04 Dec '24

04 Dec '24

alsa-project/alsa-ucm-conf issue #483 was opened from karolyi: Hey, I have this sound card and with the latest update (1.2.13), pulseaudio started to SIGSEGV and I have no sound. Upon going to the pulseaudio IRC channel and talking to the devs, we've managed to point out that it's the UCM configuration that makes pulseaudio crash. Reverting to 1.2.12 made the crash cease. It seems that the newly added configuration for the Ultralite makes pulseaudio crash. According to the below gdb traces, it seems the configuration drives pulseaudio into an infinite loop. Beginning of the trace: ``` Debuginfod has been enabled. To make this setting permanent, add 'set debuginfod enabled on' to .gdbinit. [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7ae98df in _int_malloc (av=av@entry=0x7ffff7c2dac0 <main_arena>, bytes=bytes@entry=2080) at malloc.c:4059 4059 size_t tc_idx = csize2tidx (nb); Thread 1 (Thread 0x7ffff73298c0 (LWP 40542) "pulseaudio"): #0 0x00007ffff7ae98df in _int_malloc (av=av@entry=0x7ffff7c2dac0 <main_arena>, bytes=bytes@entry=2080) at malloc.c:4059 #1 0x00007ffff7aec069 in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #2 0x00007ffff7e5e366 in pa_xmalloc0 (size=2080) at ../src/pulse/xmalloc.c:74 #3 0x00007ffff7e7d3d4 in pa_idxset_new (hash_func=0x7ffff7e7d371 <pa_idxset_trivial_hash_func>, compare_func=0x7ffff7e7d37f <pa_idxset_trivial_compare_func>) at ../src/pulsecore/idxset.c:86 #4 0x00007ffff7e7f5a9 in pa_idxset_copy (s=0x5555556f5890, copy_func=0x0) at ../src/pulsecore/idxset.c:623 #5 0x00007ffff6b93ff0 in iterate_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1399 #6 0x00007ffff6b94108 in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1412 #7 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 #8 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 ``` Inbetween there's just a lot of recursive calls. End of the trace: ``` #130916 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 #130917 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 #130918 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 #130919 0x00007ffff6b9418a in iterate_maximal_device_subsets (devices=0x5555556f5060, state=0x7fffffffca38) at ../src/modules/alsa/alsa-ucm.c:1422 #130920 0x00007ffff6b96635 in ucm_create_verb_profiles (ucm=0x55555567bc60, ps=0x5555556ca560, verb=0x5555556c8970, verb_name=0x5555556c6d60 "HiFi", verb_desc=0x5555556a3120 "Default") at ../src/modules/alsa/alsa-ucm.c:2042 #130921 0x00007ffff6b973bf in pa_alsa_ucm_add_profile_set (ucm=0x55555567bc60, default_channel_map=0x555555570de0) at ../src/modules/alsa/alsa-ucm.c:2305 #130922 0x00007ffff6c6bb43 in module_alsa_card_LTX_pa__init (m=0x55555566d9d0) at ../src/modules/alsa/module-alsa-card.c:966 #130923 0x00007ffff7f26919 in pa_module_load (module=0x7fffffffccf0, c=0x555555570d20, name=0x7ffff6c7747d "module-alsa-card", argument=0x555555587f10 "device_id=\"2\" name=\"usb-MOTU_UltraLite-mk5_UL5LFF34E6-00\" card_name=\"alsa_card.usb-MOTU_UltraLite-mk5_UL5LFF34E6-00\" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=y"...) at ../src/pulsecore/module.c:208 #130924 0x00007ffff6c74260 in verify_access (u=0x55555566ae40, d=0x55555566e430) at ../src/modules/module-udev-detect.c:342 #130925 0x00007ffff6c7488f in card_changed (u=0x55555566ae40, dev=0x55555568ae50) at ../src/modules/module-udev-detect.c:437 #130926 0x00007ffff6c74c6f in process_device (u=0x55555566ae40, dev=0x55555568ae50) at ../src/modules/module-udev-detect.c:479 #130927 0x00007ffff6c74cf8 in process_path (u=0x55555566ae40, path=0x5555556879b0 "/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb1/1-1/1-1.1/1-1.1:1.0/sound/card2") at ../src/modules/module-udev-detect.c:496 #130928 0x00007ffff6c75ed0 in module_udev_detect_LTX_pa__init (m=0x555555666220) at ../src/modules/module-udev-detect.c:812 #130929 0x00007ffff7f26919 in pa_module_load (module=0x7fffffffcf28, c=0x555555570d20, name=0x555555668c20 "module-udev-detect", argument=0x0) at ../src/pulsecore/module.c:208 #130930 0x00007ffff7f073ba in pa_cli_command_load (c=0x555555570d20, t=0x555555668c40, buf=0x5555555717b0, fail=0x55555556f6b5) at ../src/pulsecore/cli-command.c:440 #130931 0x00007ffff7f0fac4 in pa_cli_command_execute_line_stateful (c=0x555555570d20, s=0x7fffffffd100 "load-module module-udev-detect", buf=0x5555555717b0, fail=0x55555556f6b5, ifstate=0x7fffffffd0f8) at ../src/pulsecore/cli-command.c:2207 #130932 0x00007ffff7f0fda2 in pa_cli_command_execute_file_stream (c=0x555555570d20, f=0x55555556fce0, buf=0x5555555717b0, fail=0x55555556f6b5) at ../src/pulsecore/cli-command.c:2247 #130933 0x00007ffff7f10031 in pa_cli_command_execute_file (c=0x555555570d20, fn=0x555555570c70 "/home/karolyi/Work/opensource/pulseaudio/build/src/daemon/default.pa", buf=0x5555555717b0, fail=0x55555556f6b5) at ../src/pulsecore/cli-command.c:2278 #130934 0x00007ffff7f0f7d8 in pa_cli_command_execute_line_stateful (c=0x555555570d20, s=0x555555570560 ".include /home/karolyi/Work/opensource/pulseaudio/build/src/daemon/default.pa", buf=0x5555555717b0, fail=0x55555556f6b5, ifstate=0x7fffffffdb1c) at ../src/pulsecore/cli-command.c:2170 #130935 0x00007ffff7f10239 in pa_cli_command_execute (c=0x555555570d20, s=0x555555577bc0 ".include /home/karolyi/Work/opensource/pulseaudio/build/src/daemon/default.pa\n", buf=0x5555555717b0, fail=0x55555556f6b5) at ../src/pulsecore/cli-command.c:2304 #130936 0x0000555555564162 in main (argc=7, argv=0x7fffffffde98) at ../src/daemon/main.c:1267 Continuing. Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. ``` Requested debug output from the pulseaudio project: https://termbin.com/n04r Please investigate. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/483 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Should SOF ucm2/blobs/sof user_configs and product_configs be without .conf suffix?
by GitHub issues - edited 04 Dec '24

04 Dec '24

alsa-project/alsa-ucm-conf issue #482 was edited from singalsu: It seems updates have dropped .conf from looked up SOF blobs customization files. Is the change intentional? Then the example in ucm2/blobs/sof/product_configs/AAEON/UPX-TGL01.conf should be renamed to be without .conf to work and to be applied correctly. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/482 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Should SOF ucm2/blobs/sof user_configs and product_configs be without .conf suffix?
by GitHub issues - opened 04 Dec '24

04 Dec '24

alsa-project/alsa-ucm-conf issue #482 was opened from singalsu: It seems updates have dropped .conf from looked up SOF blobs customization files. Is the change intentional? Then the example in ucm2/blobs/sof/product_configs/AAEON/UPX-TGL01.conf should be renamed to be without .conf to work and be applied correctly. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/482 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

axfer-transfer.1: Some remarks and editorial changes for this man page
by Bjarni Ingi Gislason 04 Dec '24

04 Dec '24

Package: alsa-utils Version: 1.2.12-1 Severity: minor Tags: patch * What led up to the situation? Checking for defects with test-[g|n]roff -mandoc -t -K utf8 -rF0 -rHY=0 -ww -b -z < "man page" [Use "groff -e ' $' <file>" to find trailing spaces.] ["test-groff" is a script in the repository for "groff"; is not shipped] (local copy and "troff" slightly changed by me). [The fate of "test-nroff" was decided in groff bug #55941.] * What was the outcome of this action? troff: backtrace: file '<stdin>':1006 troff:<stdin>:1006: warning: trailing space in the line * What outcome did you expect instead? No output (no warnings). -.- General remarks and further material, if a diff-file exist, are in the attachments. -- System Information: Debian Release: trixie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 6.11.10-amd64 (SMP w/2 CPU threads; PREEMPT) Locale: LANG=is_IS.iso88591, LC_CTYPE=is_IS.iso88591 (charmap=ISO-8859-1), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: sysvinit (via /sbin/init) Versions of packages alsa-utils depends on: ii kmod 33+20240816-2 ii libasound2t64 1.2.12-1+b1 ii libatopology2t64 1.2.12-1+b1 ii libc6 2.40-3 ii libfftw3-single3 3.3.10-1+b3 ii libncursesw6 6.5-2+b1 ii libsamplerate0 0.2.2-4+b2 ii libtinfo6 6.5-2+b1 alsa-utils recommends no packages. Versions of packages alsa-utils suggests: pn dialog <none> -- no debconf information

1 0

[PATCH 1/2] ASoC: amd: ps: update mach params subsystem_rev variable
by Vijendar Mukunda 03 Dec '24

03 Dec '24

Update mach_params subsystem_rev with acp_rev variable for ACP6.3 platform. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/ps/pci-ps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index aef73ec6f7ef..4ed50cebadb3 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -312,6 +312,7 @@ static struct snd_soc_acpi_mach *acp63_sdw_machine_select(struct device *dev) if (mach && mach->link_mask) { mach->mach_params.links = mach->links; mach->mach_params.link_mask = mach->link_mask; + mach->mach_params.subsystem_rev = acp_data->acp_rev; return mach; } } -- 2.34.1

2 2