April 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] [PATCH 4/6] alsa-lib:pcm: fix the hw_ptr update until the boundary available.
by sutar.mounesh＠gmail.com 19 Jan '18

19 Jan '18

From: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> For long time test case, the slave_hw_ptr will exceed the boundary and wraparound the slave_hw_ptr. This slave boundary wraparound will cause the rate->hw_ptr to wraparound irrespective of the rate->boundary availability and due to that the available size goes wrong. Hence, To get the correct available size, - Its necessary to increment the rate->hw_ptr upto the rate->boundary and then wraparound the rate->hw_ptr. - While handling fraction part of slave period, rounded value will be introduced by input_frames(). To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Signed-off-by: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> Signed-off-by: Mounesh Sutar <mounesh_sutar(a)mentor.com> diff --git a/src/pcm/pcm_rate.c b/src/pcm/pcm_rate.c index 1f830dd..5bee77c 100644 --- a/src/pcm/pcm_rate.c +++ b/src/pcm/pcm_rate.c @@ -50,7 +50,7 @@ typedef struct _snd_pcm_rate snd_pcm_rate_t; struct _snd_pcm_rate { snd_pcm_generic_t gen; - snd_pcm_uframes_t appl_ptr, hw_ptr; + snd_pcm_uframes_t appl_ptr, hw_ptr, last_slave_hw_ptr; snd_pcm_uframes_t last_commit_ptr; snd_pcm_uframes_t orig_avail_min; snd_pcm_sw_params_t sw_params; @@ -563,14 +563,28 @@ static inline void snd_pcm_rate_sync_hwptr0(snd_pcm_t *pcm, snd_pcm_uframes_t sl { snd_pcm_rate_t *rate = pcm->private_data; + snd_pcm_sframes_t slave_hw_ptr_diff = slave_hw_ptr - rate->last_slave_hw_ptr; + snd_pcm_sframes_t last_slave_hw_ptr_frac; + if (pcm->stream != SND_PCM_STREAM_PLAYBACK) return; - /* FIXME: boundary overlap of slave hw_ptr isn't evaluated here! - * e.g. if slave rate is small... - */ - rate->hw_ptr = - (slave_hw_ptr / rate->gen.slave->period_size) * pcm->period_size + - rate->ops.input_frames(rate->obj, slave_hw_ptr % rate->gen.slave->period_size); + + if (slave_hw_ptr_diff < 0) + slave_hw_ptr_diff += rate->gen.slave->boundary; /* slave boundary wraparound */ + else if (slave_hw_ptr_diff == 0) + return; + last_slave_hw_ptr_frac = rate->last_slave_hw_ptr % rate->gen.slave->period_size; + /* While handling fraction part fo slave period, rounded value will be introduced by input_frames(). + * To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and + * add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Hence, + * rate->hw_ptr += [ (no. of updated slave periods * pcm rate period size) - + * fractional part of last_slave_hw_ptr rounded value + + * fractional part of updated slave hw ptr's rounded value ] */ + rate->hw_ptr += ( + (((last_slave_hw_ptr_frac + slave_hw_ptr_diff) / rate->gen.slave->period_size) * pcm->period_size) - + rate->ops.input_frames(rate->obj, last_slave_hw_ptr_frac) + + rate->ops.input_frames(rate->obj, (last_slave_hw_ptr_frac + slave_hw_ptr_diff) % rate->gen.slave->period_size)); + rate->last_slave_hw_ptr = slave_hw_ptr; rate->hw_ptr %= pcm->boundary; } @@ -635,6 +649,7 @@ static int snd_pcm_rate_prepare(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; @@ -650,6 +665,7 @@ static int snd_pcm_rate_reset(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; -- 1.7.9.5

3 2

[alsa-devel] [PATCH 0/7] ALSA: Fine-tuning for several function implementations
by SF Markus Elfring 14 Nov '17

14 Nov '17

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Tue, 24 Jan 2017 11:02:34 +0100 Some update suggestions were taken into account from static source code analysis. Markus Elfring (7): seq: Delete unnecessary checks in snd_seq_ioctl_query_subs() seq: Delete unnecessary checks in snd_seq_ioctl_get_subscription() seq: Delete unnecessary checks in snd_seq_ioctl_unsubscribe_port() seq: Delete unnecessary checks in snd_seq_ioctl_subscribe_port() seq: Adjust 16 function calls together with a variable assignment dmasound_core: Move two assignments for the variable "ret" in state_open() dmasound_core: Adjust six function calls together with a variable assignment sound/core/seq/seq_clientmgr.c | 163 ++++++++++++++++++++----------------- sound/oss/dmasound/dmasound_core.c | 33 +++++--- 2 files changed, 109 insertions(+), 87 deletions(-) -- 2.11.0

2 9

[alsa-devel] [PATCH 1/1] ASoC: bcm2835-i2s: Support 384k sample rate
by Clive Messer 10 Nov '17

10 Nov '17

Add support for sample rates up to 384k to bcm2835-i2s driver, with SNDRV_PCM_RATE_CONTINUOUS and specifying 8k min and 384k max, for both playback and capture. Signed-off-by: Clive Messer <clive.messer(a)digitaldreamtime.co.uk> --- sound/soc/bcm/bcm2835-i2s.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index 6ba2049..4a67db2 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -578,7 +578,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .playback = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE @@ -586,7 +588,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .capture = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE -- 2.5.5

3 2

[alsa-devel] [PATCH v2 0/2] ASoC: add support for CX2072X CODEC
by simon.ho.cnxt＠gmail.com 13 Oct '17

13 Oct '17

From: Simon Ho <simon.ho(a)conexant.com> Hi Takashi, Mark I corrected the driver based on your input as below. Please help review the code. Mark: - Corrected the coding style. - EQ/DRC settings can be configured from userspace via mixer controls. - Wrongly cast void pointers. - Print I2C error code. - Use memcmp() to check if the new EQ value is different. - Removed unused TDM code. - Removed noisy "out of memory" message. - Corrected ACPI and I2C match table. - Removed unnessary CONFIG_ACPI define. Takashi: - Fixed printf int argument. - Fixed unexpected error code at no MCLK fallback. Thanks, Simon Simon Ho (2): ASoC: cx2072x: Add DT bingings documentation for CX2072X CODEC ASoC: add support for Conexant CX2072X CODEC .../devicetree/bindings/sound/cx2072x.txt | 36 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cx2072x.c | 2253 ++++++++++++++++++++ sound/soc/codecs/cx2072x.h | 319 +++ 5 files changed, 2615 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cx2072x.txt create mode 100644 sound/soc/codecs/cx2072x.c create mode 100644 sound/soc/codecs/cx2072x.h -- 2.7.4

4 10

[alsa-devel] ASoC Sound Driver I2S over LPE, Intel Baytrail SoC. MinnowBoard Max
by Michael Pogrebinsky 02 Oct '17

02 Oct '17

Hi all, I have the MinnowBoard Max with Baytrail Atom (ValleyView) SoC. I'm attempting to write an Alsa (ASoC) driver for my sound card to work with this board. PCM should work through I2S for this sound card I have. >From my understanding Baytrail's I2S goes over LPE. I read this thread:https://www.mail-archive.com/elinux-minnowboard@lists.elinux.org/msg… So I understand that I need the 3 components for my ASoC driver. However I am having trouble at understanding how to communicate with the LPE to get the I2S working. Here is what I have done so far: I am running Ubuntu 14.04 LTS, kernel : 4.3.0-040300rc4 First of all I downloaded the firmware fw_sst_0f28.bin-48kHz_i2s_master fromhttps://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux… And put it /lib/firmware/intel/. Later I went to the Bios and enabled LPE in PCI mode. I do see the LPE controller now, but it shows as UNCLAIMED. Later I looked at the sound/soc/inte/baytrail/ and from my understanding in order for me to get the I2S working I need to load this module so I did modprobe snd-soc-sst-baytrail-pcm. Later I wrote a simple codec and machine driver (looking at the example of sound/soc/intel/boards/byt_max98090) however everytime I attempt to register the sound card with snd_soc_register_card, I get the following error message in dmesg : "ASoC: CPU DAI baytrail-pcm-audio not registered". >From this I deduct that although I loaded the snd-soc-sst-baytrail-pcm module, the driver has not actually been loaded. I'm clueless on how to proceed from here. I would highly appreciate your help.

3 7

[alsa-devel] [PATCH] ASoC: Intel: Atom: Remove unneeded linux/miscdevice.h include
by Corentin Labbe 19 Sep '17

19 Sep '17

No file in sound/soc/intel/ use any miscdevice. This patch remove this uncessary include. Signed-off-by: Corentin Labbe <clabbe.montjoie(a)gmail.com> --- sound/soc/intel/atom/sst/sst_acpi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index f4d92bb..a971a58 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/firmware.h> #include <linux/pm_runtime.h> -- 2.10.2

2 1

[alsa-devel] [PATCH 0/9] AC97 device/driver model revamp
by Robert Jarzmik 19 Sep '17

19 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 Last submission was a RFC in here: http://www.gossamer-threads.com/lists/linux/kernel/2446863 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 The driving ideas are still the same, and I put them in [1] for memory. This is the first post RFC submission. In order to make a full demonstration of the framework, wm97xx was converted to an MFD, see [2] for the "why". As this serie is a complete wm9713 change towards the new AC97 bus, here is the patch organization : - 1/9, 2/9, 3/9 and 5/9: the new AC97 bus, for Mark and Takashi to review - 4/9: wm9713 conversion, this one has ugly #ifdefs, should be reviewed more carefully - 6/9: prerequisite for final 9/9, for Marek and Sebastian to approve => this one is independent and can flow through Sebastian's tree in this next-cycle if accepted - 7/9: prerequisite for final 9/9, for Mark/Dmitry => this one is also independent and can flow in this cycle if accepted - 8/9: prerequisite for final 9/9, for Lee to review => this one has a dependency on 2/9, so it probably can't fit in this next-cycle - 9/9: this last one depends on all the patches before, so it can't fit in this next-cycle As a sum-up, I'd like to push for review for this -next cycle at least the patches 1, 2, 3, 5, 6 and 9. Happy review. Robert Jarzmik (9): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support power_supply: wm97xx_battery: use power_supply_get_drvdata Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 247 +++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 ++++++++++++++++++ drivers/power/supply/wm97xx_battery.c | 25 +- include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 115 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/ac97/regs.h | 262 ++++++++++++++++ include/sound/ac97_codec.h | 239 +-------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 510 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 39 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/wm9713.c | 37 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 22 +- 28 files changed, 1738 insertions(+), 382 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4 [1] RFC PATCH reminder: Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. [2] As a corollary, wm97xx is changed into a MFD device, which at least spawns: - the touchscreen device - the ac97 codec - the problem to solve was stated in http://www.gossamer-threads.com/lists/linux/kernel/2510113#2510113

9 38