Alsa-devel August 2019

alsa-devel@alsa-project.org

131 participants
316 discussions

[alsa-devel] [PATCH] ALSA: usb-audio: fix spelling mistake "Frequence" -> "Frequency"
by Colin King 02 Oct '20

02 Oct '20

From: Colin Ian King <colin.king(a)canonical.com> There are spelling mistakes in equalizer name fields, fix them. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/usb/mixer_us16x08.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index 26ed23b18b77..4f594f9552a8 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -1119,7 +1119,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQLOWFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ Low Frequence", + .name = "EQ Low Frequency", }, { /* EQ mid low gain */ .kcontrol_new = &snd_us16x08_eq_gain_ctl, @@ -1133,7 +1133,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQLOWMIDFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ MidLow Frequence", + .name = "EQ MidLow Frequency", }, { /* EQ mid low Q */ .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, @@ -1154,7 +1154,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQHIGHMIDFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ MidHigh Frequence", + .name = "EQ MidHigh Frequency", }, { /* EQ mid high Q */ .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, @@ -1175,7 +1175,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQHIGHFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ High Frequence", + .name = "EQ High Frequency", }, }; -- 2.19.1

3 3

[alsa-devel] Attempting to understand odd snd-usb-audio code and behavior
by Keith A. Milner 21 Aug '20

21 Aug '20

Over the last few weeks I've been trying to dig through the snd-usb-audio code to try to get an understanding of it. I've used ftrace and also a local version which I have heavily polluted with kprintf(KERN_INFO statements so I can track what it's doing in practice. I've been playing with this with some USB audio interfaces I have some which work, and some which don't, and trying to understand the differences and, ultimately, what I can do to make the non-functioning ones work. I've got to the point where I have a fairly good understanding of some parts, but I'm struggling to understand why the code is behaving as it does in practice. My observation when plugging the USB device in is that, as expected, it tries to build the audio device, and add components to it including attaching capture and playback streams. It seems to go through this phase without too many surprises, and we get to the standard dmesg output: usbcore: registered new interface driver snd-usb-audio After this, it gets confusing. It seems to open and close the PCMs (e.g, snd_usb_capture_open) several times in a row. Each time it sets up the hardware info, checks and sets the format and then closes the PCM. I don't see anything obviously different between most of these cycles. Here's an example my logging output (hopefully this will make sense): Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Setting up hw info Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Checking format: Aug 22 20:04:16 kerneldev kernel: [ 923.140790] Interface number = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting index = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] format type = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] frame size = 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140791] Setting pt=125 ptmin=125 Aug 22 20:04:16 kerneldev kernel: [ 923.140792] Checking for unusual bit rates Aug 22 20:04:16 kerneldev kernel: [ 923.140794] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.140921] Called: pcm.c - snd_usb_hw_params for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Setting format: Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Bytes per period = 8816 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Frames per period = 1102 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Periods per buffer = 4 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Channels = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Rate = 44100 Aug 22 20:04:16 kerneldev kernel: [ 923.141279] Called: endpoint.c - snd_usb_add_endpoint of type 0 with direction 1 Aug 22 20:04:16 kerneldev kernel: [ 923.141292] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141293] Called: pcm.c - configure_endpoint Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Setting endpoint params for endpoint num 142 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] channels=2 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] period bytes=8816 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] frames per period=1102 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] periods per buffer=4 Aug 22 20:04:16 kerneldev kernel: [ 923.141296] Called: endpoint.c - data_ep_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141301] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142768] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142772] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142774] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142830] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142836] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142837] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142846] Called: pcm.c - snd_usb_capture_close for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146760] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146834] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146838] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146841] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146845] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146848] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Setting up hw info It seems to do this several times, before the behavior changing slightly, as it now starts to try to set the endpoint parameters and seems to leave the stream open. However, it then tries to open the stream and set the endpoint parameters again resulting in errors: Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Setting endpoint params for endpoint num 142 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] channels=2 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] period bytes=1768 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] frames per period=221 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] periods per buffer=593 Aug 22 20:22:00 kerneldev kernel: [ 1987.452947] usb 1-1: Unable to change format on ep #8e: already in use Maybe this is driven by hotplug or something, but it seems to be performing a lot of pointless activities. Eventually it seems to try to open the PCM playback or capture stream (with some devices it opens playback, with others capture) and then checks the pointer: Aug 22 20:22:00 kerneldev kernel: [ 1987.470194] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470656] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470657] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Pointer is 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473567] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473569] Pointer is 0 The above is from a non-working device. For a working device the pointer increments. Eventually this activity ends: Aug 22 20:22:05 kerneldev kernel: [ 1992.473575] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473576] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473578] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473602] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503287] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503288] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503323] Called: pcm.c - snd_usb_playback_close for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503656] Called: init.c - snd_card_file_remove This seems as if it might be some sort of test of the PCMs, to make sure they are working. Certainly in non-working devices the pcm_pointer stays at zero and in working devices it increments. It also seems to try harder with some devices than others, even though the device descriptors seem very similar. Can anyone explain any of this to me, particularly why it's exhibiting this behaviour. I've uploaded one of the logs from a non-working device to Pastebin if anyone wants to look at a full example: https://pastebin.com/uBZEuQ57 Also, is this the best way to approach this, or are there other tools/techniques that can help? I've experimented with ftrace and that was useful, but didn't give the level of detail I wanted. Cheers, Keith

3 10

[alsa-devel] [PATCH 0/2 v4] ALSA: pcm: anonymous dup implementation
by Jaroslav Kysela 12 Jun '20

12 Jun '20

This patchset contains the anonymous dup implementation with permissions checking for the ALSA's PCM interface in kernel to enable the restricted DMA sound buffer sharing for the restricted tasks. The code was tested through qemu and it seems to be pretty stable. The initial tinyalsa implementation can be found here: https://github.com/perexg/tinyalsa/commits/anondup v2 of the patches: - change clone parameter to subdevice number for the pcm attach - change SNDRV_PCM_PERM_MAX to SNDRV_PCM_PERM_MASK - the tinyalsa implementation was a little updated (restructured) v3 of the patches: - group integer declarations in snd_pcm_anonymous_dup() - replaced substream->pcm with pcm in snd_pcm_anonymous_dup() - added SNDRV_PCM_PERM_RW check for read/write/readv/writev syscalls v4 of the patches: - more simple restriction control (only two modes - full/buffer) - the tinyalsa implementation follows this change Cc: Phil Burk <philburk(a)google.com> Cc: Zach Riggle <riggle(a)google.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Leo Yan <leo.yan(a)linaro.org> Cc: Baolin Wang <baolin.wang(a)linaro.org> Jaroslav Kysela (2): ALSA: pcm: implement the anonymous dup (inode file descriptor) ALSA: pcm: implement the mmap buffer mode for the anonymous dup include/sound/pcm.h | 10 +++-- include/uapi/sound/asound.h | 6 ++- sound/core/oss/pcm_oss.c | 2 +- sound/core/pcm.c | 13 +++--- sound/core/pcm_compat.c | 1 + sound/core/pcm_native.c | 97 ++++++++++++++++++++++++++++++++++++++++++--- 6 files changed, 110 insertions(+), 19 deletions(-) -- 2.13.6

4 17

[alsa-devel] [PATCH] ASoC: stm32: sai: fix master clock management
by Olivier Moysan 16 Apr '20

16 Apr '20

When master clock is used, master clock rate is set exclusively. Parent clocks of master clock cannot be changed after a call to clk_set_rate_exclusive(). So the parent clock of SAI kernel clock must be set before. Ensure also that exclusive rate operations are balanced in STM32 SAI driver. Signed-off-by: Olivier Moysan <olivier.moysan(a)st.com> --- sound/soc/stm/stm32_sai_sub.c | 64 +++++++++++++++++++++++++++++++------------ 1 file changed, 47 insertions(+), 17 deletions(-) diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index 3dd54bc54fa1..77aa38183955 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -70,6 +70,7 @@ #define SAI_IEC60958_STATUS_BYTES 24 #define SAI_MCLK_NAME_LEN 32 +#define SAI_RATE_11K 11025 /** * struct stm32_sai_sub_data - private data of SAI sub block (block A or B) @@ -311,6 +312,25 @@ static int stm32_sai_set_clk_div(struct stm32_sai_sub_data *sai, return ret; } +static int stm32_sai_set_parent_clock(struct stm32_sai_sub_data *sai, + unsigned int rate) +{ + struct platform_device *pdev = sai->pdev; + struct clk *parent_clk = sai->pdata->clk_x8k; + int ret; + + if (!(rate % SAI_RATE_11K)) + parent_clk = sai->pdata->clk_x11k; + + ret = clk_set_parent(sai->sai_ck, parent_clk); + if (ret) + dev_err(&pdev->dev, " Error %d setting sai_ck parent clock. %s", + ret, ret == -EBUSY ? + "Active stream rates conflict\n" : "\n"); + + return ret; +} + static long stm32_sai_mclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { @@ -492,25 +512,29 @@ static int stm32_sai_set_sysclk(struct snd_soc_dai *cpu_dai, struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai); int ret; - if (dir == SND_SOC_CLOCK_OUT) { + if (dir == SND_SOC_CLOCK_OUT && sai->sai_mclk) { ret = regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, SAI_XCR1_NODIV, (unsigned int)~SAI_XCR1_NODIV); if (ret < 0) return ret; - dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq); - sai->mclk_rate = freq; + /* If master clock is used, set parent clock now */ + ret = stm32_sai_set_parent_clock(sai, freq); + if (ret) + return ret; - if (sai->sai_mclk) { - ret = clk_set_rate_exclusive(sai->sai_mclk, - sai->mclk_rate); - if (ret) { - dev_err(cpu_dai->dev, - "Could not set mclk rate\n"); - return ret; - } + ret = clk_set_rate_exclusive(sai->sai_mclk, freq); + if (ret) { + dev_err(cpu_dai->dev, + ret == -EBUSY ? + "Active streams have incompatible rates" : + "Could not set mclk rate\n"); + return ret; } + + dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq); + sai->mclk_rate = freq; } return 0; @@ -917,11 +941,13 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai, int div = 0, cr1 = 0; int sai_clk_rate, mclk_ratio, den; unsigned int rate = params_rate(params); + int ret; - if (!(rate % 11025)) - clk_set_parent(sai->sai_ck, sai->pdata->clk_x11k); - else - clk_set_parent(sai->sai_ck, sai->pdata->clk_x8k); + if (!sai->sai_mclk) { + ret = stm32_sai_set_parent_clock(sai, rate); + if (ret) + return ret; + } sai_clk_rate = clk_get_rate(sai->sai_ck); if (STM_SAI_IS_F4(sai->pdata)) { @@ -1080,9 +1106,13 @@ static void stm32_sai_shutdown(struct snd_pcm_substream *substream, regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, SAI_XCR1_NODIV, SAI_XCR1_NODIV); - clk_disable_unprepare(sai->sai_ck); + /* Release mclk rate only if rate was actually set */ + if (sai->mclk_rate) { + clk_rate_exclusive_put(sai->sai_mclk); + sai->mclk_rate = 0; + } - clk_rate_exclusive_put(sai->sai_mclk); + clk_disable_unprepare(sai->sai_ck); spin_lock_irqsave(&sai->irq_lock, flags); sai->substream = NULL; -- 2.7.4

2 3

[alsa-devel] [PATCH] ASoC: pcm: fix error handling when try_module_get() fails.
by Ranjani Sridharan 15 Apr '20

15 Apr '20

Handle error before returning when try_module_get() fails to prevent inconsistent mutex lock/unlock. Fixes: 52034add7 (ASoC: pcm: update module refcount if module_get_upon_open is set) Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- sound/soc/soc-pcm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index d21247546f7f..be80a12fba27 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -518,8 +518,10 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) continue; if (component->driver->module_get_upon_open && - !try_module_get(component->dev->driver->owner)) - return -ENODEV; + !try_module_get(component->dev->driver->owner)) { + ret = -ENODEV; + goto module_err; + } ret = component->driver->ops->open(substream); if (ret < 0) { @@ -636,7 +638,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) component_err: soc_pcm_components_close(substream, component); - +module_err: if (cpu_dai->driver->ops->shutdown) cpu_dai->driver->ops->shutdown(substream, cpu_dai); out: -- 2.17.1

2 5

[alsa-devel] [PATCH] ASoC: wcd9335: Fix missing regmap requirement
by Marc Gonzalez 15 Apr '20

15 Apr '20

wcd9335.c: undefined reference to 'devm_regmap_add_irq_chip' Signed-off-by: Marc Gonzalez <marc.w.gonzalez(a)free.fr> --- sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 419142111b6d..33778dc99108 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1162,6 +1162,7 @@ config SND_SOC_WCD9335 tristate "WCD9335 Codec" depends on SLIMBUS select REGMAP_SLIMBUS + select REGMAP_IRQ help The WCD9335 is a standalone Hi-Fi audio CODEC IC, supports Qualcomm Technologies, Inc. (QTI) multimedia solutions, -- 2.17.1

3 4

[alsa-devel] motu microbook iic
by thomas rost 26 Feb '20

26 Feb '20

Hello, can anybody help me get the 'class compliant' motu microbook iic to run? this is my alsa-info.sh output: http://alsa-project.org/db/?f=0fd9a8df7bae3400d83b6af8b75c45aa0760d84d thanks in advance. thomas

2 1

[alsa-devel] [PATCH v9] ASoC: pxa: switch to new ac97 bus support
by Robert Jarzmik 24 Feb '20

24 Feb '20

Switch to the new ac97 bus support in sound/ac97 instead of the legacy snd_ac97 one. Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> --- Since v8: fixed the trivial compilation error v7 was in https://patchwork.kernel.org/patch/9951919/ --- sound/arm/Kconfig | 1 - sound/soc/pxa/Kconfig | 5 ++--- sound/soc/pxa/pxa2xx-ac97.c | 48 +++++++++++++++++++++++---------------------- 3 files changed, 27 insertions(+), 27 deletions(-) diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index 65171f6657a2..f1f25704fe52 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -36,7 +36,6 @@ endif # SND_ARM config SND_PXA2XX_LIB tristate - select SND_AC97_CODEC if SND_PXA2XX_LIB_AC97 select SND_DMAENGINE_PCM config SND_PXA2XX_LIB_AC97 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 484ab3c2ad67..1a0b55beb282 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -20,13 +20,12 @@ config SND_MMP_SOC config SND_PXA2XX_AC97 tristate - select SND_AC97_CODEC config SND_PXA2XX_SOC_AC97 tristate - select AC97_BUS + select AC97_BUS_NEW select SND_PXA2XX_LIB_AC97 - select SND_SOC_AC97_BUS + select SND_SOC_AC97_BUS_NEW config SND_PXA2XX_SOC_I2S tristate diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 1b41c0f2a8fb..80e4757176d8 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -17,6 +17,7 @@ #include <linux/dmaengine.h> #include <linux/dma/pxa-dma.h> +#include <sound/ac97/controller.h> #include <sound/core.h> #include <sound/ac97_codec.h> #include <sound/soc.h> @@ -27,43 +28,35 @@ #include <mach/regs-ac97.h> #include <mach/audio.h> -static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) +static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv) { pxa2xx_ac97_try_warm_reset(); pxa2xx_ac97_finish_reset(); } -static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) +static void pxa2xx_ac97_cold_reset(struct ac97_controller *adrv) { pxa2xx_ac97_try_cold_reset(); pxa2xx_ac97_finish_reset(); } -static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97, - unsigned short reg) +static int pxa2xx_ac97_read_actrl(struct ac97_controller *adrv, int slot, + unsigned short reg) { - int ret; - - ret = pxa2xx_ac97_read(ac97->num, reg); - if (ret < 0) - return 0; - else - return (unsigned short)(ret & 0xffff); + return pxa2xx_ac97_read(slot, reg); } -static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97, - unsigned short reg, unsigned short val) +static int pxa2xx_ac97_write_actrl(struct ac97_controller *adrv, int slot, + unsigned short reg, unsigned short val) { - int ret; - - ret = pxa2xx_ac97_write(ac97->num, reg, val); + return pxa2xx_ac97_write(slot, reg, val); } -static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { - .read = pxa2xx_ac97_legacy_read, - .write = pxa2xx_ac97_legacy_write, +static struct ac97_controller_ops pxa2xx_ac97_ops = { + .read = pxa2xx_ac97_read_actrl, + .write = pxa2xx_ac97_write_actrl, .warm_reset = pxa2xx_ac97_warm_reset, .reset = pxa2xx_ac97_cold_reset, }; @@ -219,6 +212,9 @@ static const struct snd_soc_component_driver pxa_ac97_component = { static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) { int ret; + struct ac97_controller *ctrl; + pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data; + void **codecs_pdata; if (pdev->id != -1) { dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n"); @@ -231,10 +227,14 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) return ret; } - ret = snd_soc_set_ac97_ops(&pxa2xx_ac97_ops); - if (ret != 0) - return ret; + codecs_pdata = pdata ? pdata->codec_pdata : NULL; + ctrl = snd_ac97_controller_register(&pxa2xx_ac97_ops, &pdev->dev, + AC97_SLOTS_AVAILABLE_ALL, + codecs_pdata); + if (IS_ERR(ctrl)) + return PTR_ERR(ctrl); + platform_set_drvdata(pdev, ctrl); /* Punt most of the init to the SoC probe; we may need the machine * driver to do interesting things with the clocking to get us up * and running. @@ -245,8 +245,10 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) static int pxa2xx_ac97_dev_remove(struct platform_device *pdev) { + struct ac97_controller *ctrl = platform_get_drvdata(pdev); + snd_soc_unregister_component(&pdev->dev); - snd_soc_set_ac97_ops(NULL); + snd_ac97_controller_unregister(ctrl); pxa2xx_ac97_hw_remove(pdev); return 0; } -- 2.11.0

2 1

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] Simultaneous play/record on implicit feedback device causes 'endpoint in use' error
by Robert Giaraffa 15 Jan '20

15 Jan '20

My company (Silicon Labs) makes a CP2615 USB audio class 1.0 device which uses implicit feedback. I saw these two issues when testing with aplay/arecord/alsabat/alsaloop: * During playback-only operation, the implicit feedback (IN) endpoint was not active. * During play/record operation, the implicit feedback values were not acted on, i.e. the host always sent 192 bytes per OUT packet even if previous IN packets had been 188 or 196 bytes. This behavior was observed on these systems: RaspberryPi2: Raspbian 9 (stretch), kernel v4.14.72 x86-64: Ubuntu 18.04, kernel v4.15.0-36 I was able to get implicit feedback working properly in playback mode by adding a device-specific quirk to 'pcm.c' that is similar to existing quirks for implicit-feedback devices, e.g. M-Audio Fast Track Ultra. (Note: The following patch applies to kernel v4.14.72. In v4.18, the set_sync_ep_implicit_fb_quirk function was changed so that there is a single call to usb_ifnum_to_if(), rather than a call for each device-dependent quirk.) $ git diff pcm.c diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index b9c9a19f..6fb5567b 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -358,6 +358,21 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, alts = &iface->altsetting[1]; goto add_sync_ep; + case USB_ID(0x10C4, 0xEAC1): // Silicon Labs CP2615 + // Ensure CP2615 is configured in Async Mode + if (attr != USB_ENDPOINT_SYNC_ASYNC) + return 0; + + // In P16R16 async mode, AudioIN EP (IF:4 EP:0x83) used for implicit feedback + ep = 0x83; + iface = usb_ifnum_to_if(dev, 4); + + if (!iface || iface->num_altsetting == 0) + return -EINVAL; + + alts = &iface->altsetting[1]; + goto add_sync_ep; + } if (attr == USB_ENDPOINT_SYNC_ASYNC && altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC && After adding the patch, I verified that implicit feedback worked properly for playback, i.e. the OUT samples per packet tracked previous IN values. However, when attempting to perform simultaneous play and record via alsabat, alsaloop, or separate aplay/arecord, the system reports the 'endpoint already in use' error when attempting to set the format for the IN endpoint that is already in use (note that this dmesg log has customized printk messages): [Oct23 10:13] snd_usb_hw_params->set_format() [ +0.000014] set_format(): dev:b3856c00 alts:b67e8824 ifnum: 3 [ +0.001654] set_format()->usb_set_interface 3:1 [ +0.000006] Creating new playback data endpoint 03 [ +0.000004] Creating new capture data endpoint 83 <Begin Playback. SYNC endpoint also starts because feedback is implicit> [ +0.000027] snd_usb_pcm_prepare->set_format() [ +0.000005] set_format(): dev:b3856c00 alts:b67e8824 ifnum: 3 [ +0.000755] Setting params for EP 03 (type 0, 12 urbs), ret=0 [ +0.000017] Setting params for EP 83 (type 0, 12 urbs), ret=0 [ +0.000004] Starting DATA_EP 03 @b9224000 [ +0.000004] snd_usb_endpoint_implicit_feedback_sink (03) is TRUE [ +0.001495] Starting SYNC_EP 83 @b9222000 <After playing for 0.5s, start recording. Failure occurs because EP83 is already in use.> [ +0.493035] snd_usb_hw_params->set_format() [ +0.000016] set_format(): dev:b3856c00 alts:b67e88a4 ifnum: 4 [ +0.001549] set_format()->usb_set_interface 4:1 [ +0.000005] Re-using EP 83 in iface 4:1 [ +0.000028] snd_usb_pcm_prepare->set_format() [ +0.000004] set_format(): dev:b3856c00 alts:b67e88a4 ifnum: 4 *** [ +0.003196] *** snd_usb_endpoint_set_params(): EP #83: already in use [ +0.000003] configure_endpoint->endpoint_set_params: err=FFFFFFF0 I bought a used Fast Track Ultra device for comparison testing, and found that it behaved the same way as the CP2615 does with the implicit feedback quirk: in playback-only mode implicit feedback works properly, but play/record causes the 'EP already in use' error. Are there any suggestions on how I can resolve this issue? Any help would be greatly appreciated! Thanks, Bob Giaraffa

3 4

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel August 2019