July 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] Attempting to understand odd snd-usb-audio code and behavior
by Keith A. Milner 21 Aug '20

21 Aug '20

Over the last few weeks I've been trying to dig through the snd-usb-audio code to try to get an understanding of it. I've used ftrace and also a local version which I have heavily polluted with kprintf(KERN_INFO statements so I can track what it's doing in practice. I've been playing with this with some USB audio interfaces I have some which work, and some which don't, and trying to understand the differences and, ultimately, what I can do to make the non-functioning ones work. I've got to the point where I have a fairly good understanding of some parts, but I'm struggling to understand why the code is behaving as it does in practice. My observation when plugging the USB device in is that, as expected, it tries to build the audio device, and add components to it including attaching capture and playback streams. It seems to go through this phase without too many surprises, and we get to the standard dmesg output: usbcore: registered new interface driver snd-usb-audio After this, it gets confusing. It seems to open and close the PCMs (e.g, snd_usb_capture_open) several times in a row. Each time it sets up the hardware info, checks and sets the format and then closes the PCM. I don't see anything obviously different between most of these cycles. Here's an example my logging output (hopefully this will make sense): Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Setting up hw info Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Checking format: Aug 22 20:04:16 kerneldev kernel: [ 923.140790] Interface number = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting index = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] format type = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] frame size = 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140791] Setting pt=125 ptmin=125 Aug 22 20:04:16 kerneldev kernel: [ 923.140792] Checking for unusual bit rates Aug 22 20:04:16 kerneldev kernel: [ 923.140794] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.140921] Called: pcm.c - snd_usb_hw_params for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Setting format: Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Bytes per period = 8816 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Frames per period = 1102 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Periods per buffer = 4 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Channels = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Rate = 44100 Aug 22 20:04:16 kerneldev kernel: [ 923.141279] Called: endpoint.c - snd_usb_add_endpoint of type 0 with direction 1 Aug 22 20:04:16 kerneldev kernel: [ 923.141292] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141293] Called: pcm.c - configure_endpoint Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Setting endpoint params for endpoint num 142 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] channels=2 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] period bytes=8816 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] frames per period=1102 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] periods per buffer=4 Aug 22 20:04:16 kerneldev kernel: [ 923.141296] Called: endpoint.c - data_ep_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141301] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142768] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142772] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142774] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142830] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142836] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142837] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142846] Called: pcm.c - snd_usb_capture_close for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146760] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146834] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146838] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146841] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146845] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146848] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Setting up hw info It seems to do this several times, before the behavior changing slightly, as it now starts to try to set the endpoint parameters and seems to leave the stream open. However, it then tries to open the stream and set the endpoint parameters again resulting in errors: Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Setting endpoint params for endpoint num 142 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] channels=2 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] period bytes=1768 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] frames per period=221 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] periods per buffer=593 Aug 22 20:22:00 kerneldev kernel: [ 1987.452947] usb 1-1: Unable to change format on ep #8e: already in use Maybe this is driven by hotplug or something, but it seems to be performing a lot of pointless activities. Eventually it seems to try to open the PCM playback or capture stream (with some devices it opens playback, with others capture) and then checks the pointer: Aug 22 20:22:00 kerneldev kernel: [ 1987.470194] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470656] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470657] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Pointer is 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473567] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473569] Pointer is 0 The above is from a non-working device. For a working device the pointer increments. Eventually this activity ends: Aug 22 20:22:05 kerneldev kernel: [ 1992.473575] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473576] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473578] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473602] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503287] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503288] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503323] Called: pcm.c - snd_usb_playback_close for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503656] Called: init.c - snd_card_file_remove This seems as if it might be some sort of test of the PCMs, to make sure they are working. Certainly in non-working devices the pcm_pointer stays at zero and in working devices it increments. It also seems to try harder with some devices than others, even though the device descriptors seem very similar. Can anyone explain any of this to me, particularly why it's exhibiting this behaviour. I've uploaded one of the logs from a non-working device to Pastebin if anyone wants to look at a full example: https://pastebin.com/uBZEuQ57 Also, is this the best way to approach this, or are there other tools/techniques that can help? I've experimented with ftrace and that was useful, but didn't give the level of detail I wanted. Cheers, Keith

3 10

[alsa-devel] [PATCH v9] ASoC: pxa: switch to new ac97 bus support
by Robert Jarzmik 24 Feb '20

24 Feb '20

Switch to the new ac97 bus support in sound/ac97 instead of the legacy snd_ac97 one. Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> --- Since v8: fixed the trivial compilation error v7 was in https://patchwork.kernel.org/patch/9951919/ --- sound/arm/Kconfig | 1 - sound/soc/pxa/Kconfig | 5 ++--- sound/soc/pxa/pxa2xx-ac97.c | 48 +++++++++++++++++++++++---------------------- 3 files changed, 27 insertions(+), 27 deletions(-) diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index 65171f6657a2..f1f25704fe52 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -36,7 +36,6 @@ endif # SND_ARM config SND_PXA2XX_LIB tristate - select SND_AC97_CODEC if SND_PXA2XX_LIB_AC97 select SND_DMAENGINE_PCM config SND_PXA2XX_LIB_AC97 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 484ab3c2ad67..1a0b55beb282 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -20,13 +20,12 @@ config SND_MMP_SOC config SND_PXA2XX_AC97 tristate - select SND_AC97_CODEC config SND_PXA2XX_SOC_AC97 tristate - select AC97_BUS + select AC97_BUS_NEW select SND_PXA2XX_LIB_AC97 - select SND_SOC_AC97_BUS + select SND_SOC_AC97_BUS_NEW config SND_PXA2XX_SOC_I2S tristate diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 1b41c0f2a8fb..80e4757176d8 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -17,6 +17,7 @@ #include <linux/dmaengine.h> #include <linux/dma/pxa-dma.h> +#include <sound/ac97/controller.h> #include <sound/core.h> #include <sound/ac97_codec.h> #include <sound/soc.h> @@ -27,43 +28,35 @@ #include <mach/regs-ac97.h> #include <mach/audio.h> -static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) +static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv) { pxa2xx_ac97_try_warm_reset(); pxa2xx_ac97_finish_reset(); } -static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) +static void pxa2xx_ac97_cold_reset(struct ac97_controller *adrv) { pxa2xx_ac97_try_cold_reset(); pxa2xx_ac97_finish_reset(); } -static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97, - unsigned short reg) +static int pxa2xx_ac97_read_actrl(struct ac97_controller *adrv, int slot, + unsigned short reg) { - int ret; - - ret = pxa2xx_ac97_read(ac97->num, reg); - if (ret < 0) - return 0; - else - return (unsigned short)(ret & 0xffff); + return pxa2xx_ac97_read(slot, reg); } -static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97, - unsigned short reg, unsigned short val) +static int pxa2xx_ac97_write_actrl(struct ac97_controller *adrv, int slot, + unsigned short reg, unsigned short val) { - int ret; - - ret = pxa2xx_ac97_write(ac97->num, reg, val); + return pxa2xx_ac97_write(slot, reg, val); } -static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { - .read = pxa2xx_ac97_legacy_read, - .write = pxa2xx_ac97_legacy_write, +static struct ac97_controller_ops pxa2xx_ac97_ops = { + .read = pxa2xx_ac97_read_actrl, + .write = pxa2xx_ac97_write_actrl, .warm_reset = pxa2xx_ac97_warm_reset, .reset = pxa2xx_ac97_cold_reset, }; @@ -219,6 +212,9 @@ static const struct snd_soc_component_driver pxa_ac97_component = { static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) { int ret; + struct ac97_controller *ctrl; + pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data; + void **codecs_pdata; if (pdev->id != -1) { dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n"); @@ -231,10 +227,14 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) return ret; } - ret = snd_soc_set_ac97_ops(&pxa2xx_ac97_ops); - if (ret != 0) - return ret; + codecs_pdata = pdata ? pdata->codec_pdata : NULL; + ctrl = snd_ac97_controller_register(&pxa2xx_ac97_ops, &pdev->dev, + AC97_SLOTS_AVAILABLE_ALL, + codecs_pdata); + if (IS_ERR(ctrl)) + return PTR_ERR(ctrl); + platform_set_drvdata(pdev, ctrl); /* Punt most of the init to the SoC probe; we may need the machine * driver to do interesting things with the clocking to get us up * and running. @@ -245,8 +245,10 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) static int pxa2xx_ac97_dev_remove(struct platform_device *pdev) { + struct ac97_controller *ctrl = platform_get_drvdata(pdev); + snd_soc_unregister_component(&pdev->dev); - snd_soc_set_ac97_ops(NULL); + snd_ac97_controller_unregister(ctrl); pxa2xx_ac97_hw_remove(pdev); return 0; } -- 2.11.0

2 1

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] Focusrite Scarlett 6i6 gen1 - input handling fix
by Jens Verwiebe 19 Nov '19

19 Nov '19

The Scarlett 6i6 has no padding on rear inputs 3/4 but a gainstage. This patch introduces this functionality as to be seen in the mac or windows scarlett control. The correct address could already be found in the dump info, but was never used. Cheers ... Jens Signed-off-by: Jens Verwiebe <info(a)jensverwiebe.de> diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c index 7438e7c..f3bdac3 100644 --- a/sound/usb/mixer_scarlett.c +++ b/sound/usb/mixer_scarlett.c @@ -152,6 +152,7 @@ enum { SCARLETT_OUTPUTS, SCARLETT_SWITCH_IMPEDANCE, SCARLETT_SWITCH_PAD, + SCARLETT_SWITCH_GAIN, }; enum { @@ -202,6 +203,15 @@ struct scarlett_device_info { } }; +static const struct scarlett_mixer_elem_enum_info opt_gain = { + .start = 0, + .len = 2, + .offsets = {}, + .names = (char const * const []){ + "Lo", "Hi" + } +}; + static const struct scarlett_mixer_elem_enum_info opt_impedance = { .start = 0, .len = 2, @@ -664,8 +674,8 @@ static int add_output_ctls(struct usb_mixer_interface *mixer, { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, - { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, - { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 3, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, + { .num = 4, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, }, .matrix_mux_init = { @@ -895,6 +905,15 @@ static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer, if (err < 0) return err; break; + case SCARLETT_SWITCH_GAIN: + sprintf(mx, "Input %d Gain Switch", ctl->num); + err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, + scarlett_ctl_enum_resume, 0x01, + 0x08, ctl->num, USB_MIXER_S16, 1, mx, + &opt_gain, &elem); + if (err < 0) + return err; + break; } } -- Jens Verwiebe Allerskehre 44 - 22309 Hamburg Tel.: +49 40 68 78 50 mobile: +49 172 400 49 07 mailto: info(a)jensverwiebe.de web: http://www.jensverwiebe.de

2 7

[alsa-devel] [PATCH] ALSA: usb-audio: fix PCM device order
by Alexander Tsoy 27 Jul '19

27 Jul '19

Some cards have alternate setting with non-PCM format as the first altsetting in the interface descriptors. This confuses userspace, since alsa-lib uses device 0 by default. So lets parse interfaces in two steps: 1. Parse altsettings with PCM formats. 2. Parse altsettings with non-PCM formats. This fixes at least following cards: - Audinst HUD-mx2 - Audinst HUD-mini Signed-off-by: Alexander Tsoy <alexander(a)tsoy.me> --- sound/usb/stream.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 8e9548bc1f1a..b2ebeae91396 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -477,7 +477,8 @@ static struct uac2_output_terminal_descriptor * return NULL; } -int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no) +static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no, + bool *has_non_pcm, bool non_pcm) { struct usb_device *dev; struct usb_interface *iface; @@ -634,6 +635,10 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no) iface_no, altno); continue; } + if (fmt->bFormatType != UAC_FORMAT_TYPE_I) + *has_non_pcm = true; + if ((fmt->bFormatType == UAC_FORMAT_TYPE_I) == non_pcm) + continue; if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) || ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) { dev_err(&dev->dev, @@ -740,3 +745,23 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no) return 0; } +int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no) +{ + int err; + bool has_non_pcm = false; + + /* parse PCM formats */ + err = __snd_usb_parse_audio_interface(chip, iface_no, &has_non_pcm, false); + if (err < 0) + return err; + + if (has_non_pcm) { + /* parse non-PCM formats */ + err = __snd_usb_parse_audio_interface(chip, iface_no, &has_non_pcm, true); + if (err < 0) + return err; + } + + return 0; +} + -- 2.13.0

3 2

[alsa-devel] alsa-lib-1.1.6.tar.bz2: some files are missing in the tarball
by Lars Wendler 13 May '19

13 May '19

Hello list, please have a look at this Gentoo bug report [1] where a user reported that he cannot compile alsa-lib-1.1.6 with --enable-alisp configure option. The error message is: make[3]: *** No rule to make target 'SI7018/sndoc-mixer.alisp', needed by 'all-am'. Stop. This happens because the directory src/conf/cards/SI7018 is missing as well as the following files: src/conf/cards/aliases.alisp src/conf/smixer.conf src/conf/sndo-mixer.alisp First I thought those files were removed intentionally but checking the alsa-lib git tree I can see all files still being available. So at Gentoo we fixed this by re-adding the files through a patch [2]. Any chance this was an accidental oversight? Kind regards Lars [1] https://bugs.gentoo.org/652422 [2] https://gitweb.gentoo.org/repo/gentoo.git/tree/media-libs/alsa-lib/files/al… P.S.: Please CC me on replies as I am not subscribed to the list. -- Lars Wendler Gentoo package maintainer GPG: 21CC CF02 4586 0A07 ED93 9F68 498F E765 960E 9B39

2 3

[alsa-devel] [PATCH v2] ASoC: core: Allow topology to override machine driver FE DAI link config.
by Liam Girdwood 03 May '19

03 May '19

Machine drivers statically define a number of DAI links that currently cannot be changed or removed by topology. This means PCMs and platform components cannot be changed by topology at runtime AND machine drivers are tightly coupled to topology. This patch allows topology to override the machine driver DAI link config in order to reuse machine drivers with different topologies and platform components. The patch supports :- 1) create new FE PCMs with a topology defined PCM ID. 2) destroy existing static FE PCMs 3) change the platform component driver. 4) assign any new HW params fixups. 5) assign a new card name prefix to differentiate this topology to userspace. The patch requires no changes to the machine drivers, but does add some platform component flags that the platform component driver can assign before loading topologies. Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- Changes since V1. o Now iterate over component_list to fix crash with DT enumerated cards. o Make sure name prefix is only added once with deferred probiing. include/sound/soc.h | 13 ++++++ sound/soc/soc-core.c | 101 +++++++++++++++++++++++++++++++++++++++++-- sound/soc/soc-pcm.c | 12 +++++ 3 files changed, 123 insertions(+), 3 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index f7579f82cc00..b1d65fcb8756 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -806,6 +806,14 @@ struct snd_soc_component_driver { unsigned int use_pmdown_time:1; /* care pmdown_time at stop */ unsigned int endianness:1; unsigned int non_legacy_dai_naming:1; + + /* this component uses topology and ignore machine driver FEs */ + const char *ignore_machine; + const char *topology_name_prefix; + int (*be_hw_params_fixup)(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params); + bool use_dai_pcm_id; /* use the DAI link PCM ID as PCM device number */ + int be_pcm_base; /* base device ID for all BE PCMs */ }; struct snd_soc_component { @@ -963,6 +971,9 @@ struct snd_soc_dai_link { /* pmdown_time is ignored at stop */ unsigned int ignore_pmdown_time:1; + /* Do not create a PCM for this DAI link (Backend link) */ + unsigned int ignore:1; + struct list_head list; /* DAI link list of the soc card */ struct snd_soc_dobj dobj; /* For topology */ }; @@ -1002,6 +1013,7 @@ struct snd_soc_card { const char *long_name; const char *driver_name; char dmi_longname[80]; + char topology_shortname[32]; struct device *dev; struct snd_card *snd_card; @@ -1011,6 +1023,7 @@ struct snd_soc_card { struct mutex dapm_mutex; bool instantiated; + bool topology_shortname_created; int (*probe)(struct snd_soc_card *card); int (*late_probe)(struct snd_soc_card *card); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4663de3cf495..38bf7d01894b 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -852,6 +852,9 @@ static int soc_bind_dai_link(struct snd_soc_card *card, const char *platform_name; int i; + if (dai_link->ignore) + return 0; + dev_dbg(card->dev, "ASoC: binding %s\n", dai_link->name); if (soc_is_dai_link_bound(card, dai_link)) { @@ -1461,7 +1464,9 @@ static int soc_probe_link_dais(struct snd_soc_card *card, { struct snd_soc_dai_link *dai_link = rtd->dai_link; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int i, ret; + struct snd_soc_rtdcom_list *rtdcom; + struct snd_soc_component *component; + int i, ret, num; dev_dbg(card->dev, "ASoC: probe %s dai link %d late %d\n", card->name, rtd->num, order); @@ -1507,9 +1512,28 @@ static int soc_probe_link_dais(struct snd_soc_card *card, soc_dpcm_debugfs_add(rtd); #endif + num = rtd->num; + + /* + * most drivers will register their PCMs using DAI link ordering but + * topology based drivers can use the DAI link id field to set PCM + * device number and then use rtd + a base offset of the BEs. + */ + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; + + if (!component->driver->use_dai_pcm_id) + continue; + + if (rtd->dai_link->no_pcm) + num += component->driver->be_pcm_base; + else + num = rtd->dai_link->id; + } + if (cpu_dai->driver->compress_new) { /*create compress_device"*/ - ret = cpu_dai->driver->compress_new(rtd, rtd->num); + ret = cpu_dai->driver->compress_new(rtd, num); if (ret < 0) { dev_err(card->dev, "ASoC: can't create compress %s\n", dai_link->stream_name); @@ -1519,7 +1543,7 @@ static int soc_probe_link_dais(struct snd_soc_card *card, if (!dai_link->params) { /* create the pcm */ - ret = soc_new_pcm(rtd, rtd->num); + ret = soc_new_pcm(rtd, num); if (ret < 0) { dev_err(card->dev, "ASoC: can't create pcm %s :%d\n", dai_link->stream_name, ret); @@ -1846,6 +1870,74 @@ int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour) EXPORT_SYMBOL_GPL(snd_soc_set_dmi_name); #endif /* CONFIG_DMI */ +static void soc_check_tplg_fes(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + const struct snd_soc_component_driver *comp_drv; + struct snd_soc_dai_link *dai_link; + int i; + + list_for_each_entry(component, &component_list, list) { + + /* does this component override FEs ? */ + if (!component->driver->ignore_machine) + continue; + + /* for this machine ? */ + if (strcmp(component->driver->ignore_machine, + card->dev->driver->name)) + continue; + + /* machine matches, so override the rtd data */ + for (i = 0; i < card->num_links; i++) { + + dai_link = &card->dai_link[i]; + + /* ignore this FE */ + if (dai_link->dynamic) { + dai_link->ignore = true; + continue; + } + + dev_info(card->dev, "info: override FE DAI link %s\n", + card->dai_link[i].name); + + /* override platform component */ + dai_link->platform_name = component->name; + + /* convert non BE into BE */ + dai_link->no_pcm = 1; + + /* override any BE fixups */ + dai_link->be_hw_params_fixup = + component->driver->be_hw_params_fixup; + + /* most BE links don't set stream name, so set it to + * dai link name if it's NULL to help bind widgets. + */ + if (!dai_link->stream_name) + dai_link->stream_name = dai_link->name; + } + + /* Inform userspace we are using alternate topology */ + if (component->driver->topology_name_prefix) { + + /* topology shortname created ? */ + if (!card->topology_shortname_created) { + comp_drv = component->driver; + + snprintf(card->topology_shortname, 32, "%s-%s", + comp_drv->topology_name_prefix, + card->name); + card->topology_shortname_created = true; + } + + /* use topology shortname */ + card->name = card->topology_shortname; + } + } +} + static int snd_soc_instantiate_card(struct snd_soc_card *card) { struct snd_soc_pcm_runtime *rtd; @@ -1855,6 +1947,9 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) mutex_lock(&client_mutex); mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_INIT); + /* check whether any platform is ignore machine FE and using topology */ + soc_check_tplg_fes(card); + /* bind DAIs */ for (i = 0; i < card->num_links; i++) { ret = soc_bind_dai_link(card, &card->dai_link[i]); diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 153218aa4909..db51849ae9bd 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -865,8 +865,20 @@ int soc_dai_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; int ret; + /* perform any topology hw_params fixups before DAI */ + if (rtd->dai_link->be_hw_params_fixup) { + ret = rtd->dai_link->be_hw_params_fixup(rtd, params); + if (ret < 0) { + dev_err(rtd->dev, + "ASoC: hw_params topology fixup failed %d\n", + ret); + return ret; + } + } + if (dai->driver->ops->hw_params) { ret = dai->driver->ops->hw_params(substream, params, dai); if (ret < 0) { -- 2.17.1

4 4

[alsa-devel] [PATCH RFC 00/26] Kill set_fs() in ALSA codes
by Takashi Iwai 27 Mar '19

27 Mar '19

Hi, this is a slightly lengthy patchset, basically targeted for 4.13, thus it's still in RFC. The main purpose of this patchset is to get rid of get_fs() / set_fs() usages in ALSA codes. The patchset starts from a patch that looks fairly irrelevant with the goal (the conversion of HD-audio bind-mute code), but it's a step for the long trail. The biggest change in the patchset is the conversion of copy & silence PCM ops into the new copy_silence ops. It helped for reducing the code size and for handling the in-kernel buffer copies. The current patches are found in topic/kill-set_fs branch of my sound.git tree. thanks, Takashi === Takashi Iwai (26): ALSA: hda - Simplify bound-beep mute control for ALC268 ALSA: hda - Move bind-mixer switch codes to generic parser ALSA: hda - Remove the generic bind ctl helpers ALSA: hda - Remove the use of set_fs() ALSA: hda - Fix a typo in comment ALSA: hda - Remove superfluous header inclusions ALSA: opl3: Kill unused set_fs() ALSA: emu10k1: Get rid of set_fs() usage ALSA: pcm: Remove set_fs() in PCM core code ALSA: pcm: Introduce copy_silence PCM ops ALSA: Update document about copy_silence PCM ops ALSA: dummy: Convert to copy_silence ops ALSA: es1938: Convert to copy_silence ops ALSA: korg1212: Convert to copy_silence ops ALSA: nm256: Convert to copy_silence ops ALSA: rme32: Convert to copy_silence ops ALSA: rme96: Convert to copy_silence ops ALSA: rme9652: Convert to copy_silence ops ALSA: hdsp: Convert to copy_silence ops ALSA: gus: Convert to copy_silence ops ALSA: sb: Convert to copy_silence ops ALSA: sh: Convert to copy_silence ops ASoC: blackfin: Convert to copy_silence ops [media] solo6x10: Convert to copy_silence ops ALSA: pcm: Drop the old copy and silence ops ALSA: pcm: Kill set_fs() usage in OSS layer and USB gadget .../sound/kernel-api/writing-an-alsa-driver.rst | 110 +++++---- drivers/media/pci/solo6x10/solo6x10-g723.c | 11 +- drivers/usb/gadget/function/u_uac1.c | 8 +- include/sound/pcm.h | 19 +- sound/core/oss/pcm_oss.c | 62 ++--- sound/core/pcm_compat.c | 22 +- sound/core/pcm_lib.c | 174 +++++++++----- sound/core/pcm_native.c | 122 ++++++---- sound/drivers/dummy.c | 13 +- sound/drivers/opl3/opl3_oss.c | 14 -- sound/isa/gus/gus_pcm.c | 43 +--- sound/isa/sb/emu8000_pcm.c | 99 +++----- sound/pci/emu10k1/emufx.c | 127 ++++++----- sound/pci/es1938.c | 11 +- sound/pci/hda/hda_codec.c | 251 +++------------------ sound/pci/hda/hda_generic.c | 46 +++- sound/pci/hda/hda_local.h | 61 ----- sound/pci/hda/patch_realtek.c | 37 ++- sound/pci/korg1212/korg1212.c | 128 +++-------- sound/pci/nm256/nm256.c | 35 ++- sound/pci/rme32.c | 49 ++-- sound/pci/rme96.c | 52 ++--- sound/pci/rme9652/hdsp.c | 44 ++-- sound/pci/rme9652/rme9652.c | 46 ++-- sound/sh/sh_dac_audio.c | 40 +--- sound/soc/blackfin/bf5xx-ac97-pcm.c | 6 +- sound/soc/blackfin/bf5xx-ac97.c | 18 +- sound/soc/blackfin/bf5xx-i2s-pcm.c | 46 ++-- sound/soc/soc-pcm.c | 3 +- 29 files changed, 696 insertions(+), 1001 deletions(-) -- 2.12.2

3 40