- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: amd: yc: Fix the wrong return value
by Venkata Prasad Potturu 10 Dec '24

10 Dec '24

With the current implementation, when ACP driver fails to read ACPI _WOV entry then the DMI overrides code won't invoke, may cause regressions for some BIOS versions. Add a condition check to jump to check the DMI entries incase of ACP driver fail to read ACPI _WOV method. Fixes: 4095cf872084 (ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry) Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> --- sound/soc/amd/yc/acp6x-mach.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index e38c5885dadf..13af1d485eb0 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -578,14 +578,19 @@ static int acp6x_probe(struct platform_device *pdev) handle = ACPI_HANDLE(pdev->dev.parent); ret = acpi_evaluate_integer(handle, "_WOV", NULL, &dmic_status); - if (!ACPI_FAILURE(ret)) + if (!ACPI_FAILURE(ret)) { wov_en = dmic_status; + if (!wov_en) + return -ENODEV; + } else { + /* Incase of ACPI method read failure then jump to check_dmi_entry */ + goto check_dmi_entry; + } if (is_dmic_enable && wov_en) platform_set_drvdata(pdev, &acp6x_card); - else - return 0; +check_dmi_entry: /* check for any DMI overrides */ dmi_id = dmi_first_match(yc_acp_quirk_table); if (dmi_id) -- 2.25.1

4 5

Support for ASUS ROG STRIX X870E-E GAMING WIFI
by GitHub pull_request - opened 10 Dec '24

10 Dec '24

alsa-project/alsa-ucm-conf pull request #486 was opened from aidvu: Add support for [ASUS ROG STRIX X870E-E GAMING WIFI](https://rog.asus.com/motherboards/rog-strix/rog-strix-x870e-e-gaming-… ). ```Bus 003 Device 004: ID 0b05:1b9b ASUSTek Computer, Inc. USB Audio``` Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/486 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/486.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2: sof-soundwire: Correct FixedBootSequence for dmic info
by GitHub pull_request - opened 10 Dec '24

10 Dec '24

alsa-project/alsa-ucm-conf pull request #485 was opened from ujfalusi: Replace the curly brackets with square brackets. The curly ones break the FixedBootSequence parsing by resetting the sequence. If the /var/lib/alsa/card0.conf.d is not present then UCM will fail because all sequences before the dmic is lost, including the card-init: # alsactl init alsa-lib main.c:619:(execute_cfgsave) unable to open file '/var/lib/alsa/card0.conf.d/42-sof-hdmi.conf': No such file or directory alsa-lib main.c:2456:(set_fixedboot_user) Unable to execute force boot sequence The full sequence supposed to be: card-init ctl-remap cs42l43 dmic hdmi Fixes: 9fa70add7638 ("sof-hda-dsp,sof-soundwire: add CaptureMicInfoFile fields for dmics") Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/485 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/485.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH 00/17] ASoC: remove snd_soc_dai_set_tristate()
by Kuninori Morimoto 10 Dec '24

10 Dec '24

Hi Mark snd_soc_dai_set_tristate() has added in v2.6.27 (2008/Oct) by this commit 8c6529dbf881303920a415c2d14a500218661949 ("ALSA: asoc: core - add Digital Audio Interface (DAI) control functions.") But it has never been used during this 16 years. Let's remove it. Kuninori Morimoto (17): ASoC: pxa: remove snd_soc_dai_set_tristate() ASoC: codecs: cs35l32: remove snd_soc_dai_set_tristate() ASoC: codecs: cs35l33: remove snd_soc_dai_set_tristate() ASoC: codecs: cs35l34: remove snd_soc_dai_set_tristate() ASoC: codecs: cs42l73: remove snd_soc_dai_set_tristate() ASoC: codecs: cs53l30: remove snd_soc_dai_set_tristate() ASoC: codecs: wm8961: remove snd_soc_dai_set_tristate() ASoC: codecs: wm8994: remove snd_soc_dai_set_tristate() ASoC: codecs: wm8995: remove snd_soc_dai_set_tristate() ASoC: codecs: wm9713: remove snd_soc_dai_set_tristate() ASoC: codecs: adau1372: remove snd_soc_dai_set_tristate() ASoC: codecs: adau1977: remove snd_soc_dai_set_tristate() ASoC: codecs: adau7118: remove snd_soc_dai_set_tristate() ASoC: codecs: madera: remove snd_soc_dai_set_tristate() ASoC: codecs: arizona: remove snd_soc_dai_set_tristate() ASoC: codecs: twl4030: remove snd_soc_dai_set_tristate() ASoC: remove snd_soc_dai_set_tristate() include/sound/soc-dai.h | 3 --- sound/soc/codecs/adau1372.c | 14 -------------- sound/soc/codecs/adau1977.c | 15 --------------- sound/soc/codecs/adau7118.c | 19 ------------------- sound/soc/codecs/arizona.c | 17 ----------------- sound/soc/codecs/cs35l32.c | 9 --------- sound/soc/codecs/cs35l33.c | 21 --------------------- sound/soc/codecs/cs35l34.c | 15 --------------- sound/soc/codecs/cs42l73.c | 10 ---------- sound/soc/codecs/cs53l30.c | 10 ---------- sound/soc/codecs/madera.c | 22 ---------------------- sound/soc/codecs/twl4030.c | 28 ---------------------------- sound/soc/codecs/wm8961.c | 14 -------------- sound/soc/codecs/wm8994.c | 28 ---------------------------- sound/soc/codecs/wm8995.c | 33 --------------------------------- sound/soc/codecs/wm9713.c | 17 ----------------- sound/soc/pxa/pxa-ssp.c | 21 --------------------- sound/soc/soc-dai.c | 19 ------------------- 18 files changed, 315 deletions(-) -- 2.43.0

3 20

Re: [vdr] Identifying MPEG-4 HE-AAC (LATM, LAOS) audio formats
by schorpp 09 Dec '24

09 Dec '24

Am 06.12.24 um 21:32 schrieb Marko Mäkelä: > A couple of weeks ago, Finland took the penultimate step to get rid of > DVB-T. Since years, we had DVB-T and DVB-T2 running in parallel. The > DVB-T transponders should be shut down in 2025. same here but h.265 video and aac audio. > > The step was to introduce a second free-to-air DVB-T2 bouquet to carry > some channels that were previously only available with DVB-T and MPEG-2. > The VDR channel search failed to find this transponder; I ran a patched > version of https://github.com/mighty-p/t2scan/pull/15/ to generate a new > channels.conf. (Is this a bug of VDR, or a feature? I remember that when > I originally set up VDR, I had to get a channels.conf from tscan or > t2scan.) have You tried the latest git version of scan in dvb-utils @linuxtx.org repo? > > Unlike our first free-to-air DVB-T2 bouquet, which uses MPEG-4 H.264 > video with AC3 audio, the second one uses H.264 video and HE-AAC audio, > also known as LATM or LOAS. This had to be explicitly enabled for my > output device: https://github.com/reufer/rpihddevice/issues/20 > > The HE-AAC support in rpihddevice is experimental, as it has been in ffmpeg until today and rpihddevive is based on it? > maybe because the > sampling rate is hard-coded as 48 kHz and the number of channels as 2. > Unlike AC3, it does not look like these parameters would be available in > any audio frame header. As far I understood from a NorDig.org > specification, the sampling rate would always be 48 kHz, but the number > of channels could be identified by something in the container, > specifically, Table 12.28 and Table 12.29 at page 164 of > https://nordig.org/wp-content/uploads/2016/03/NorDig-Unified- > Requirements-ver.-3.2.1.pdf Have You tried the latest git ffprobe version, does it detect the aac flavor of Your dvb-t2 DVB channels correctly? Have You tried latest git mediainfo? > > What would have to be changed in VDR or rpihddevice or both to correctly > switch between 2-channel and 5.1-channel HE-AAC audio? This is mostly an > academic question and exercise, because I only have stereo audio > hardware and don't know if any programming is actually available with > multichannel audio. Not at all academic. Since AVRs do not implement Fraunhofer codecs we need a HDNI PCM Multichannel driver for the raspberry pi to playback 5.1 channel aac without transcoding it to ac3 which can be done with mplayer on the fly. I've made a HDMI PCM Multichannel output to AVR driver patch for the Allwinner SoC alsa audio driver, look for it on the alsa-dev list archives. > > Best regards, > > Marko y tom

2 1

[PATCH treewide 00/11] ASoC: Clean up {hp,mic}-det-gpio handling
by Geert Uytterhoeven 09 Dec '24

09 Dec '24

Hi all, The "gpio" suffix for GPIO consumers was deprecated a while ago, in favor of the "gpios" suffix. However, there are still several users of the "hp-det-gpio" and "mic-det-gpio" properties, in DT bindings, drivers, and DT source files. Drivers that use gpiolib handle both the deprecated and new properties transparently, but that is not the case when using of_property_*() calls directly. - The first patch fixes a bug, as the Freescale Generic ASoC Sound driver handles only the deprecated properties, while there is already a user of the new variants, - The second patch updates the Audio Graph and Simple Audio Card DT bindings, - Patches 3-9 converts various DTS files to use the new properties, - The last 2 patches convert Freescale sound device nodes to use the new properties. All patches can be applied independently, except for the last two, which depend on the first patch to avoid regressions. This series was compile-tested only. Thanks for your comments! Geert Uytterhoeven (11): ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios ASoC: dt-bindings: Deprecate {hp,mic}-det-gpio ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios arm64: dts: freescale: imx: Switch to simple-audio-card,hp-det-gpios arm64: dts: renesas: beacon-renesom: Switch to mic-det-gpios arm64: dts: rockchip: Switch to simple-audio-card,hp-det-gpios arm64: dts: rockchip: Switch to hp-det-gpios arm64: dts: uniphier: Switch to hp-det-gpios mips: dts: ingenic: Switch to simple-audio-card,hp-det-gpios ARM: dts: nxp: imx: Switch to {hp,mic}-det-gpios arm64: dts: freescale: imx: Switch to hp-det-gpios .../devicetree/bindings/sound/audio-graph.yaml | 6 ++++++ .../devicetree/bindings/sound/simple-card.yaml | 12 ++++++++++++ arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts | 4 ++-- arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 4 ++-- arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 2 +- .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +- arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 2 +- .../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 +- .../boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi | 2 +- .../arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- .../boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts | 2 +- .../boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts | 2 +- .../boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg-arc.dtsi | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353p.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353ps.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353v.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg353vs.dts | 2 +- .../boot/dts/rockchip/rk3566-anbernic-rg503.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 2 +- .../dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts | 2 +- .../boot/dts/rockchip/rk3588-orangepi-5-plus.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 2 +- .../boot/dts/rockchip/rk3588s-gameforce-ace.dts | 2 +- .../boot/dts/socionext/uniphier-ld11-global.dts | 2 +- .../boot/dts/socionext/uniphier-ld20-global.dts | 2 +- arch/mips/boot/dts/ingenic/gcw0.dts | 2 +- arch/mips/boot/dts/ingenic/rs90.dts | 2 +- sound/soc/fsl/fsl-asoc-card.c | 8 +++++--- 50 files changed, 72 insertions(+), 52 deletions(-) -- 2.34.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert(a)linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

8 30

Audio Crackling with some Steam games
by orbea 06 Dec '24

06 Dec '24

Hi, OS: Gentoo Kernel: 6.12.1 alsa-lib: 1.2.12 Product Name: X670E PG Lightning GPU: [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] (rev c1) When using HDMI audio I am having an issue where some Steam games as run using Proton will have audio crackling or static after a short period of time after starting the game. The games that I know do this are 'Tales of Symphonia', 'Ys VIII: Lacrimosa of DANA' and 'Metaphor: Refantazio'. While many other games do not have this problem. I am not sure if this is a problem specific to the Steam ecosystem, the games, alsa, the kernel or something else? At least in the case of 'Ys VIII' I can only reproduce the problem when running the game in Steam where the same game files when run using the system wine or self compiled proton there are no audio issues. In the Proton logs it shows many underruns as soon as the issue starts: ALSA lib pcm.c:8545:(snd_pcm_recover) underrun occurred The problem also appears when using a simple /etc/asound.conf that contains only: defaults.pcm.card 0 defaults.pcm.device 9 defaults.ctl.card 0 I have also tried asking about this issue on the Proton Github issue tracker and the FAudio issue tracker. https://github.com/FNA-XNA/FAudio/issues/367 https://github.com/ValveSoftware/Proton/issues/3820#issuecomment-2477846139 https://github.com/ValveSoftware/Proton/issues/822#issuecomment-2326999328 In the FAudio issue it was suggested it was related to protonmediaconverter where the system wine and proton use ffmpeg, but I am not sure how to confirm this. I attached the alsa-info.txt. Is there anything I can do to further diagnose, resolve or workaround this? Any further info I neglected to provide that can help this? Thanks!

1 0

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16

[PATCH v5 RESEND 0/6] ASoC: fsl: add memory to memory function for ASRC
by Shengjiu Wang 06 Dec '24

06 Dec '24

This function is base on the accelerator implementation for compress API: https://patchwork.kernel.org/project/alsa-devel/patch/20241002093904.180979… Audio signal processing also has the requirement for memory to memory similar as Video. This asrc memory to memory (memory ->asrc->memory) case is a non real time use case. User fills the input buffer to the asrc module, after conversion, then asrc sends back the output buffer to user. So it is not a traditional ALSA playback and capture case. Because we had implemented the "memory -> asrc ->i2s device-> codec" use case in ALSA. Now the "memory->asrc->memory" needs to reuse the code in asrc driver, so the patch 1 and patch 2 is for refining the code to make it can be shared by the "memory->asrc->memory" driver. Other change is to add memory to memory support for two kinds of i.MX ASRC modules. changes in v5: - Drop Jaroslav Kysela's patch as it has been merged. - Add Jaroslav Kysela's Acked-by tag, received in v3. changes in v4: - remove the RFC tag, no comments receive in v3 - Add Jaroslav Kysela's patch in this patch set. because it may be better for reviewing in a full patch set. - Fix the list_for_each_entry_reverse to list_for_each_entry_safe_reverse - Fix some coding style issues in Jaroslav Kysela's patch changes in v3: - use Jaroslav's suggestion for header file compress_params.h (PATCH 01) - remove the ASRC_OUTPUT_FORMAT/ASRC_OUTPUT_RATE definition - remove ASRC_RATIO_MOD in this version because it uses .set_metadata() Will wait Jaroslav's update or other better method in the future. - Address some comments from Pierre. changes in v2: - Remove the changes in compress API - drop the SNDRV_COMPRESS_SRC_RATIO_MOD - drop the SND_AUDIOCODEC_SRC and struct snd_dec_src - define private metadata key value ASRC_OUTPUT_FORMAT/ASRC_OUTPUT_RATE/ASRC_RATIO_MOD Shengjiu Wang (6): ALSA: compress: Add output rate and output format support ASoC: fsl_asrc: define functions for memory to memory usage ASoC: fsl_easrc: define functions for memory to memory usage ASoC: fsl_asrc_m2m: Add memory to memory function ASoC: fsl_asrc: register m2m platform device ASoC: fsl_easrc: register m2m platform device include/uapi/sound/compress_params.h | 23 +- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/Makefile | 2 +- sound/soc/fsl/fsl_asrc.c | 179 ++++++- sound/soc/fsl/fsl_asrc.h | 2 + sound/soc/fsl/fsl_asrc_common.h | 70 +++ sound/soc/fsl/fsl_asrc_m2m.c | 727 +++++++++++++++++++++++++++ sound/soc/fsl/fsl_easrc.c | 261 +++++++++- sound/soc/fsl/fsl_easrc.h | 4 + 9 files changed, 1260 insertions(+), 9 deletions(-) create mode 100644 sound/soc/fsl/fsl_asrc_m2m.c -- 2.34.1

2 7