Alsa-devel August 2020

alsa-devel@alsa-project.org

159 participants
335 discussions

[alsa-devel] [PATCH 0/6] ASoC: mediatek: mt8183: support DP audio
by Tzung-Bi Shih 24 Nov '22

24 Nov '22

(This series depends on https://lore.kernel.org/patchwork/patch/1126819/ which has not applied to the maintainer's tree yet.) This series makes mt8183-mt6358-ts3a227-max98357 support DP (display port) audio output. ASoC: hdmi-codec: add PCM trigger operator - add a PCM trigger callback if codec driver is interested in PCM events. drm: bridge: it6505: bridge to hdmi-codec - add audio feature support of it6505. - bridge to hdmi-codec so that ASoC can use the audio feature. - defer the "enabling" after receiving PCM START or RESUME event. ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec - bind to hdmi-codec in mt8183-mt6358-ts3a227-max98357. drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting - use the mechanism from the following patch https://mailman.alsa-project.org/pipermail/alsa-devel/2019-September/155302… to report jack status (from DRM to ASoC). Allen Chen (1): drm: bridge: it6505: bridge to hdmi-codec Tzung-Bi Shih (5): ASoC: hdmi-codec: add PCM trigger operator ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting .../sound/mt8183-mt6358-ts3a227-max98357.txt | 2 + drivers/gpu/drm/bridge/ite-it6505.c | 191 +++++++++++++++++- include/sound/hdmi-codec.h | 13 ++ sound/soc/codecs/hdmi-codec.c | 31 +++ sound/soc/mediatek/Kconfig | 3 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 36 +++- 6 files changed, 266 insertions(+), 10 deletions(-) -- 2.23.0.866.gb869b98d4c-goog

3 9

[alsa-devel] [PATCH 00/46] ARM: pxa: towards multiplatform support
by Arnd Bergmann 19 Apr '22

19 Apr '22

Hi PXA maintainers, I'm in the process of getting the old ARM platforms to all build in a single kernel. The largest part of that work is changing all the device drivers to no longer require mach/*.h header files. This series does it for arch/pxa/. As with the omap1 and s3c24xx series I sent before, I don't expect this all to be correct in the first version, though a lot of the patches are fairly simple and I did exhaustive compile-time testing on them. Please test if you have the hardware, or review! Arnd Bcc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Bcc: alsa-devel(a)alsa-project.org Bcc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Bcc: Brian Norris <computersforpeace(a)gmail.com> Bcc: Daniel Thompson <daniel.thompson(a)linaro.org> Bcc: David Woodhouse <dwmw2(a)infradead.org> Bcc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Bcc: Dominik Brodowski <linux(a)dominikbrodowski.net> Bcc: dri-devel(a)lists.freedesktop.org Bcc: Felipe Balbi <balbi(a)kernel.org> Bcc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Bcc: Guenter Roeck <linux(a)roeck-us.net> Bcc: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Bcc: Jens Axboe <axboe(a)kernel.dk> Bcc: Jingoo Han <jingoohan1(a)gmail.com> Bcc: Jonathan Cameron <jic23(a)cam.ac.uk> Bcc: Lee Jones <lee.jones(a)linaro.org> Bcc: Lubomir Rintel <lkundrak(a)v3.sk> Bcc: Marek Vasut <marek.vasut(a)gmail.com> Bcc: Mark Brown <broonie(a)kernel.org> Bcc: Michael Turquette <mturquette(a)baylibre.com> Bcc: Miquel Raynal <miquel.raynal(a)bootlin.com> Bcc: Paul Parsons <lost.distance(a)yahoo.com> Bcc: Pavel Machek <pavel(a)ucw.cz> Bcc: Philipp Zabel <philipp.zabel(a)gmail.com> Bcc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net> Bcc: Richard Weinberger <richard(a)nod.at> Bcc: Russell King <linux(a)armlinux.org.uk> Bcc: Sebastian Reichel <sre(a)kernel.org> Bcc: Sergey Lapin <slapin(a)ossfans.org> Bcc: Stephen Boyd <sboyd(a)kernel.org> Bcc: Tomas Cech <sleep_walker(a)suse.com> Bcc: Ulf Hansson <ulf.hansson(a)linaro.org> Bcc: Vignesh Raghavendra <vigneshr(a)ti.com> Bcc: Viresh Kumar <viresh.kumar(a)linaro.org> Bcc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: linux-clk(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-watchdog(a)vger.kernel.org Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: cmx270: use platform device for nand ARM: pxa: make addr-map.h header local ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers SoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver video: backlight: tosa: use gpio lookup table power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: move it8152 PCI support into machine ARM: pxa: remove unused mach/bitfield.h ARM: pxa: pci-it8152: add platform checks ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/common/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 8 +- arch/arm/mach-pxa/Makefile | 22 +- .../mach-pxa/{include/mach => }/addr-map.h | 0 .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 2 +- arch/arm/mach-pxa/cm-x270.c | 25 +++ arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +- arch/arm/mach-pxa/cm-x2xx.c | 7 +- arch/arm/mach-pxa/cm-x300.c | 12 +- .../arm/mach-pxa/cm_x255-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x270-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x2xx-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 3 +- arch/arm/mach-pxa/csb726.c | 3 +- arch/arm/mach-pxa/devices.c | 15 +- .../arm/mach-pxa/e740-pcmcia.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/eseries.c | 34 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 78 ++++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 2 +- arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/include/mach/regs-ost.h | 4 +- arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/include/mach/tosa.h | 15 -- arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 4 +- arch/arm/mach-pxa/lubbock.c | 15 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - arch/arm/mach-pxa/magician.c | 54 ++++- arch/arm/mach-pxa/mainstone.c | 15 +- .../mach-pxa/{include/mach => }/mainstone.h | 2 - arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.c | 11 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- .../it8152.c => mach-pxa/pci-it8152.c} | 25 ++- .../it8152.h => mach-pxa/pci-it8152.h} | 2 - arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 4 +- arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 6 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 11 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-pxa/sleep.S | 5 +- arch/arm/mach-pxa/smemc.c | 11 +- arch/arm/mach-pxa/spitz.c | 33 ++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 1 - .../arm/mach-pxa/stargate2-pcmcia.c | 2 +- arch/arm/mach-pxa/tosa.c | 63 +++++- .../arm/mach-pxa/trizeps4-pcmcia.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 4 +- .../mach-pxa/{include/mach => }/trizeps4.h | 3 +- .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 11 + arch/arm/mach-pxa/zeus.c | 6 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 123 ++++++------ drivers/input/touchscreen/zylonite-wm97xx.c | 34 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 89 +++------ drivers/pcmcia/Makefile | 16 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/backlight/tosa_bl.c | 10 +- drivers/video/backlight/tosa_bl.h | 8 + drivers/video/backlight/tosa_lcd.c | 28 ++- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 42 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 205 files changed, 1916 insertions(+), 1795 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (99%) rename drivers/pcmcia/pxa2xx_cm_x255.c => arch/arm/mach-pxa/cm_x255-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x270.c => arch/arm/mach-pxa/cm_x270-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x2xx.c => arch/arm/mach-pxa/cm_x2xx-pcmcia.c (96%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (99%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (99%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (98%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (98%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (98%) rename arch/arm/{common/it8152.c => mach-pxa/pci-it8152.c} (95%) rename arch/arm/{include/asm/hardware/it8152.h => mach-pxa/pci-it8152.h} (98%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (97%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (99%) rename drivers/pcmcia/pxa2xx_stargate2.c => arch/arm/mach-pxa/stargate2-pcmcia.c (99%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (98%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) create mode 100644 drivers/video/backlight/tosa_bl.h rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.20.0

9 53

[alsa-devel] [PATCH v7 0/8] Fix year 2038 issue for sound subsystem
by Arnd Bergmann 19 Oct '21

19 Oct '21

This is a series I worked on with Baolin in 2017 and 2018, but we never quite managed to finish up the last pieces. During the ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was made to go with this approach for keeping best compatibility with existing source code, and then I failed to follow up by resending the patches. Now I have patches for all remaining time_t uses in the kernel, so it's absolutely time to revisit them. I have done more review of the patches myself and found a couple of minor issues that I have fixed up, otherwise the series is still the same as before. Conceptually, the idea of these patches is: - 64-bit applications should see no changes at all, neither compile-time nor run-time. - 32-bit code compiled with a 64-bit time_t currently does not work with ALSA, and requires kernel changes and/or sound/asound.h changes - Most 32-bit code using these interfaces will work correctly on a modified kernel, with or without the uapi header changes. - 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the updated header file for 64-bit time_t support - 32-bit i386 user space with 64-bit time_t is broken for SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also addressed by the updated uapi header. - PCM mmap is currently supported on native x86 kernels (both 32-bit and 64-bit) but not for compat mode. This series breaks the 32-bit native mmap support for 32-bit time_t, but instead allows it for 64-bit time_t on both native and compat kernels. This seems to be the best trade-off, as mmap support is optional already, and most 32-bit code runs in compat mode anyway. - I've tried to avoid breaking compilation of 32-bit code as much as possible. Anything that does break however is likely code that is already broken on 64-bit time_t and needs source changes to fix them. I hope I addressed all review comments by now, so please pull this for linux-5.6. A git branch with the same contents is available for testing at [1]. Arnd [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v7 [2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHv… Changes since v6: (Arnd): - Add a patch to update the API versions - Hide a timespec reference in #ifndef __KERNEL__ to remove the last reference to time_t - Use a more readable way to do padding and describe it in the changelog - Rebase to linux-5.5-rc1, changing include/sound/soc-component.h and sound/drivers/aloop.c as needed. Changes since v5 (Arnd): - Rebased to linux-5.4-rc4 - Updated to completely remove timespec and time_t references from alsa - found and fixed a few bugs Changes since v4 (Baolin): - Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime. - Add patch 8 to change internal timespec. - Add more explanation in commit message. - Use ktime_get_real_ts64() in patch 6. - Split common code out into a separate function in patch 6. - Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro. Changes since v3: - Move struct snd_pcm_status32 to pcm.h file. - Modify comments and commit message. - Add new patch2 ~ patch6. Changes since v2: - Renamed all structures to make clear. - Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32. Changes since v1: - Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel. - Convert pcm_compat.c to use struct snd_pcm_status_64. - Convert pcm_native.c to use struct snd_pcm_status_64. --- Arnd Bergmann (3): ALSA: move snd_pcm_ioctl_sync_ptr_compat into pcm_native.c ALSA: add new 32-bit layout for snd_pcm_mmap_status/control ALSA: bump uapi version numbers Baolin Wang (6): ALSA: Replace timespec with timespec64 ALSA: Avoid using timespec for struct snd_timer_status ALSA: Avoid using timespec for struct snd_ctl_elem_value ALSA: Avoid using timespec for struct snd_pcm_status ALSA: Avoid using timespec for struct snd_rawmidi_status ALSA: Avoid using timespec for struct snd_timer_tread include/sound/pcm.h | 74 ++++++-- include/sound/soc-component.h | 4 +- include/sound/timer.h | 4 +- include/uapi/sound/asound.h | 145 +++++++++++++-- sound/core/pcm.c | 12 +- sound/core/pcm_compat.c | 282 ++++++++---------------------- sound/core/pcm_lib.c | 38 ++-- sound/core/pcm_native.c | 226 +++++++++++++++++++++--- sound/core/rawmidi.c | 132 +++++++++++--- sound/core/rawmidi_compat.c | 87 +++------ sound/core/timer.c | 229 ++++++++++++++++++------ sound/core/timer_compat.c | 62 +------ sound/drivers/aloop.c | 2 +- sound/pci/hda/hda_controller.c | 10 +- sound/soc/intel/skylake/skl-pcm.c | 4 +- 15 files changed, 817 insertions(+), 494 deletions(-) -- 2.20.0

5 25

[PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe
by Shengjiu Wang 22 Apr '21

22 Apr '21

There are two requirements that we need to move the request of dma channel from probe to open. - When dma device binds with power-domains, the power will be enabled when we request dma channel. If the request of dma channel happen on probe, then the power-domains will be always enabled after kernel boot up, which is not good for power saving, so we need to move the request of dma channel to .open(); - With FE-BE case, if the dma channel is requested in probe, then there will be below issue, which is caused by that the dma channel will be requested duplicately [ 638.906268] sysfs: cannot create duplicate filename '/devices/soc0/soc/2000000.bus/2000000.spba-bus/2024000.esai/dma:tx' [ 638.919061] CPU: 1 PID: 673 Comm: aplay Not tainted 5.7.0-rc1-12956-gfc64b2585593 #287 [ 638.927113] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 638.933690] [<c0110dd8>] (unwind_backtrace) from [<c010b8ec>] (show_stack+0x10/0x14) [ 638.941464] [<c010b8ec>] (show_stack) from [<c0557fc0>] (dump_stack+0xe4/0x118) [ 638.948808] [<c0557fc0>] (dump_stack) from [<c032aeb4>] (sysfs_warn_dup+0x50/0x64) [ 638.956406] [<c032aeb4>] (sysfs_warn_dup) from [<c032b1a8>] (sysfs_do_create_link_sd+0xc8/0xd4) [ 638.965134] [<c032b1a8>] (sysfs_do_create_link_sd) from [<c05dc668>] (dma_request_chan+0xb0/0x210) [ 638.974120] [<c05dc668>] (dma_request_chan) from [<c05dc7d0>] (dma_request_slave_channel+0x8/0x14) [ 638.983111] [<c05dc7d0>] (dma_request_slave_channel) from [<c09d5548>] (fsl_asrc_dma_hw_params+0x1e0/0x438) [ 638.992881] [<c09d5548>] (fsl_asrc_dma_hw_params) from [<c09c1654>] (soc_pcm_hw_params+0x4a0/0x6a8) [ 639.001952] [<c09c1654>] (soc_pcm_hw_params) from [<c09c39d4>] (dpcm_fe_dai_hw_params+0x70/0xe4) [ 639.010765] [<c09c39d4>] (dpcm_fe_dai_hw_params) from [<c099b274>] (snd_pcm_hw_params+0x158/0x418) [ 639.019750] [<c099b274>] (snd_pcm_hw_params) from [<c099c5a0>] (snd_pcm_ioctl+0x734/0x183c) [ 639.028129] [<c099c5a0>] (snd_pcm_ioctl) from [<c029ff94>] (ksys_ioctl+0x2ac/0xb98) [ 639.035812] [<c029ff94>] (ksys_ioctl) from [<c0100080>] (ret_fast_syscall+0x0/0x28) [ 639.043490] Exception stack(0xec529fa8 to 0xec529ff0) [ 639.048565] 9fa0: bee84650 01321870 00000004 c25c4111 bee84650 0002000f [ 639.056766] 9fc0: bee84650 01321870 01321820 00000036 00001f40 00000000 0002c2f8 00000003 [ 639.064964] 9fe0: b6f483fc bee8451c b6ee2655 b6e1dcf8 [ 639.070339] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/imx-pcm-dma.c | 173 +++++++++++++++++++++++++++++++++--- 1 file changed, 159 insertions(+), 14 deletions(-) diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 04a9bc749016..dae53b384df4 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -11,6 +11,7 @@ #include <linux/dmaengine.h> #include <linux/types.h> #include <linux/module.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/pcm.h> @@ -29,24 +30,168 @@ static bool filter(struct dma_chan *chan, void *param) return true; } -static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = { - .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, - .compat_filter_fn = filter, -}; +static int imx_pcm_hw_params(struct snd_soc_component *component, + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_dmaengine_dai_dma_data *dma_data; + struct dma_slave_config config; + struct dma_chan *chan; + int ret = 0; -int imx_pcm_dma_init(struct platform_device *pdev, size_t size) + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + chan = snd_dmaengine_pcm_get_chan(substream); + if (!chan) + return -EINVAL; + + ret = snd_hwparams_to_dma_slave_config(substream, params, &config); + if (ret) + return ret; + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + if (!dma_data) + return -EINVAL; + + snd_dmaengine_pcm_set_config_from_dai_data(substream, + dma_data, + &config); + return dmaengine_slave_config(chan, &config); +} + +static int imx_pcm_hw_free(struct snd_soc_component *component, + struct snd_pcm_substream *substream) { - struct snd_dmaengine_pcm_config *config; + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +static snd_pcm_uframes_t imx_pcm_pointer(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + return snd_dmaengine_pcm_pointer(substream); +} + +static int imx_pcm_trigger(struct snd_soc_component *component, + struct snd_pcm_substream *substream, int cmd) +{ + return snd_dmaengine_pcm_trigger(substream, cmd); +} + +static int imx_pcm_open(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_dmaengine_dai_dma_data *dma_data; + struct device *dev = component->dev; + struct snd_pcm_hardware hw; + struct dma_chan *chan; + int ret; + + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) { + dev_err(dev, "failed to set pcm hw params periods\n"); + return ret; + } + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + if (!dma_data) + return -EINVAL; + + chan = dma_request_slave_channel(cpu_dai->dev, tx ? "tx" : "rx"); + if (!chan) { + /* Try to request channel using compat_filter_fn */ + chan = snd_dmaengine_pcm_request_channel(filter, + dma_data->filter_data); + if (!chan) + return -ENXIO; + } - config = devm_kzalloc(&pdev->dev, - sizeof(struct snd_dmaengine_pcm_config), GFP_KERNEL); - if (!config) - return -ENOMEM; - *config = imx_dmaengine_pcm_config; + ret = snd_dmaengine_pcm_open(substream, chan); + if (ret) + goto pcm_open_fail; - return devm_snd_dmaengine_pcm_register(&pdev->dev, - config, - SND_DMAENGINE_PCM_FLAG_COMPAT); + memset(&hw, 0, sizeof(hw)); + hw.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED; + hw.periods_min = 2; + hw.periods_max = UINT_MAX; + hw.period_bytes_min = 256; + hw.period_bytes_max = dma_get_max_seg_size(chan->device->dev); + hw.buffer_bytes_max = IMX_DEFAULT_DMABUF_SIZE; + hw.fifo_size = dma_data->fifo_size; + + /* Refine the hw according to caps of DMA. */ + ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream, + dma_data, + &hw, + chan); + if (ret < 0) + goto refine_runtime_hwparams_fail; + + snd_soc_set_runtime_hwparams(substream, &hw); + + /* Support allocate memory from IRAM */ + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_IRAM, + chan->device->dev, + hw.buffer_bytes_max, + &substream->dma_buffer); + if (ret < 0) + goto alloc_pagas_fail; + + return 0; + +alloc_pagas_fail: +refine_runtime_hwparams_fail: + snd_dmaengine_pcm_close(substream); +pcm_open_fail: + dma_release_channel(chan); + + return ret; +} + +static int imx_pcm_close(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + if (substream) { + snd_dma_free_pages(&substream->dma_buffer); + substream->dma_buffer.area = NULL; + substream->dma_buffer.addr = 0; + } + + return snd_dmaengine_pcm_close_release_chan(substream); +} + +static int imx_pcm_new(struct snd_soc_component *component, + struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + + return dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); +} + +static const struct snd_soc_component_driver imx_pcm_component = { + .name = "imx-pcm-dma", + .pcm_construct = imx_pcm_new, + .open = imx_pcm_open, + .close = imx_pcm_close, + .hw_params = imx_pcm_hw_params, + .hw_free = imx_pcm_hw_free, + .trigger = imx_pcm_trigger, + .pointer = imx_pcm_pointer, +}; + +int imx_pcm_dma_init(struct platform_device *pdev, size_t size) +{ + return devm_snd_soc_register_component(&pdev->dev, + &imx_pcm_component, NULL, 0); } EXPORT_SYMBOL_GPL(imx_pcm_dma_init); -- 2.21.0

5 17

ASoc: soc_core.c stream direction from snd_soc_dai
by Matt Flax 26 Feb '21

26 Feb '21

Hi there, A large number of audio codecs allow different formats for playback and capture. This becomes very useful when there are different latencies between playback and capture hardware data lines. For example digital isolation chips typically have a 1 bit delay in propagation as the bit clock rate gets faster for higher sample rates. By setting the capture and playback formats to differ by one or two bit clock cycles, the delay problem is solved. There doesn't seem to be a simple way to detect stream direction in the codec driver's set_fmt function. The snd_soc_runtime_set_dai_fmt function : https://github.com/torvalds/linux/blob/master/sound/soc/soc-core.c#L1480 calls the snd_soc_dai_set_fmt function : https://github.com/torvalds/linux/blob/master/sound/soc/soc-dai.c#L101 which calls the set_fmt function : https://github.com/torvalds/linux/blob/master/include/sound/soc-dai.h#L189 The snd_soc_dai_ops set_fmt function is defined as : int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt); Is there a simple way to find the stream direction from a snd_soc_dai ? If the stream direction can be detected then the playback and capture formats can be set independently for the codec. It there a different way to set the playback and capture formats for the codec independently at runtime, depending on the sample rate ? Matt

5 8

[PATCH] Add basic capture support for Pioneer DJ DJM-250MK2
by František Kučera 20 Jan '21

20 Jan '21

From: František Kučera <franta-linux(a)frantovo.cz> This patch extends support for DJM-250MK2 and allows recording. However, DVS is not possible yet (see the comment in code). Signed-off-by: František Kučera <franta-linux(a)frantovo.cz> --- sound/usb/pcm.c | 1 + sound/usb/quirks-table.h | 62 ++++++++++++++++++++++++++++++++++------ sound/usb/quirks.c | 1 + 3 files changed, 56 insertions(+), 8 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 5600751803cf..f5fa11deea4d 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -374,6 +374,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ifnum = 2; goto add_sync_ep_from_ifnum; case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ + case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ ep = 0x82; ifnum = 0; goto add_sync_ep_from_ifnum; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index f4fb002e3ef4..c6b2f0b8d3e2 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3549,14 +3549,40 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), { /* * Pioneer DJ DJM-250MK2 - * PCM is 8 channels out @ 48 fixed (endpoints 0x01). - * The output from computer to the mixer is usable. - * - * The input (phono or line to computer) is not working. - * It should be at endpoint 0x82 and probably also 8 channels, - * but it seems that it works only with Pioneer proprietary software. - * Even on officially supported OS, the Audacity was unable to record - * and Mixxx to recognize the control vinyls. + * PCM is 8 channels out @ 48 fixed (endpoint 0x01) + * and 8 channels in @ 48 fixed (endpoint 0x82). + * + * Both playback and recording is working, even simultaneously. + * + * Playback channels could be mapped to: + * - CH1 + * - CH2 + * - AUX + * + * Recording channels could be mapped to: + * - Post CH1 Fader + * - Post CH2 Fader + * - Cross Fader A + * - Cross Fader B + * - MIC + * - AUX + * - REC OUT + * + * There is remaining problem with recording directly from PHONO/LINE. + * If we map a channel to: + * - CH1 Control Tone PHONO + * - CH1 Control Tone LINE + * - CH2 Control Tone PHONO + * - CH2 Control Tone LINE + * it is silent. + * There is no signal even on other operating systems with official drivers. + * The signal appears only when a supported application is started. + * This needs to be investigated yet... + * (there is quite a lot communication on the USB in both directions) + * + * In current version this mixer could be used for playback + * and for recording from vinyls (through Post CH* Fader) + * but not for DVS (Digital Vinyl Systems) like in Mixxx. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { @@ -3580,6 +3606,26 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), .rate_max = 48000, .nr_rates = 1, .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // inputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } } }, { diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index abf99b814a0f..6a0be7e7f4fe 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1493,6 +1493,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, set_format_emu_quirk(subs, fmt); break; case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ + case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ pioneer_djm_set_format_quirk(subs); break; case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */ -- 2.20.1

5 9

Re: [alsa-devel] [PATCH] ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers
by Takashi Iwai 16 Oct '20

16 Oct '20

On Fri, 11 Oct 2019 19:19:36 +0200, Szabolcs Szőke wrote: > > BOSS Katana amplifiers cannot be used for recording or playback if quirks > are applied > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223 > Signed-off-by: Szabolcs Szőke <szszoke.code(a)gmail.com> Applied now. Thanks. Takashi > > --- > sound/usb/pcm.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c > index 33cd26763c0e..daadb0c66eee 100644 > --- a/sound/usb/pcm.c > +++ b/sound/usb/pcm.c > @@ -348,6 +348,9 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, > ep = 0x84; > ifnum = 0; > goto add_sync_ep_from_ifnum; > + case USB_ID(0x0582, 0x01d8): /* BOSS Katana */ > + /* BOSS Katana amplifiers do not need quirks */ > + return 0; > } > > if (attr == USB_ENDPOINT_SYNC_ASYNC && > -- > 2.20.1 >

5 20

More Generic Audio Graph Sound Card idea
by Kuninori Morimoto 16 Oct '20

16 Oct '20

Hi Mark Cc Pierre-Louis, Sameer Current audio-graph-card driver has DPCM support, but it is limited (= Mix/Mux/TDM-split/rate-convert/channel-convert). It was expanded forcibly expanded. Because of it, the connection judgement for normal vs DPCM is tricky. I know Pierre-Louis want to use it for SOF, but something is missing, thus, can't use (?). I know now Sameer is currently trying to expand it now. It is OK for me, but, more expansion in the future will be difficult/buggy. For example supporting many *generic* DPCM and normal connection in the same time will be difficult. I'm thinking below style as new audio-graph-card2. It is not tricky, thus connection judgement for normal vs DSP is easy. Then, code can be more readable (= no guaranty :P) ? I guss "audio-graph-card" and "audio-graph-card2" can have some (= not full) compatible for normal connection. But has no compatible for DPCM connection. I think I need to keep as-is for current audio-graph-card, and create new audio-graph-card2 driver. Because there is users, and card2 implementation will have huge different. Keeping compatible and update will be very difficult or buggy. But what do you think ? Note 1 is that this is just idea for now. I'm very happy to implement it, but it will be after that my all remaining patch was posted/accepted. Note 2 is that I'm not full DPCM analyst. Thus, maybe audio-graph-card2 can solve current connection issue, but might can't for unknown connection case. In such came we need ver3 (?). ------------ image --------------------------- | Front End PCMs | SoC DSP | Back End DAIs | Audio devices | ************* PCM0 <------------> * * <----DAI0-----> Codec Headset * * PCM1 <------------> * * <----DAI1-----> Codec Speakers * DSP * PCM2 <------------> * * <----DAI2-----> MODEM * * PCM3 <------------> * * <----DAI3-----> BT * * * * <----DAI4-----> DMIC * * * * <----DAI5-----> FM ************* ------------ DT sample --------------------------- sound { compatible = "audio-graph-card2"; dais = <&pcm0, &pcm1, &pcm2, &pcm3>; }; front-end { ports { pcm0: port@0 { pcm0_endpoint: endpoint { remote-endpoint = <&dsp_f0>; }; }; pcm1: port@1 { pcm1_endpoint: endpoint { remote-endpoint = <&dsp_f1>; }; }; pcm2: port@2 { pcm2_endpoint: endpoint { remote-endpoint = <&dsp_f2>; }; }; pcm3: port@3 { pcm3_endpoint: endpoint { remote-endpoint = <&dsp_f3>; }; }; }; }; dsp { compatible = "audio-graph-card2-dsp"; ports { /* Front End side */ port@0 { dsp_f0: endpoint { remote-endpoint = <&pcm0>; }; }; port@1 { dsp_f1: endpoint { remote-endpoint = <&pcm1>; }; }; port@2 { dsp_f2: endpoint { remote-endpoint = <&pcm2>; }; }; port@3 { dsp_f3: endpoint { remote-endpoint = <&pcm3>; }; }; /* Back End side */ port@4 { dsp_b0: endpoint { remote-endpoint = <&dai0>; }; }; port@5 { dsp_b1: endpoint { remote-endpoint = <&dai1>; }; }; port@6 { dsp_b2: endpoint { remote-endpoint = <&dai2>; }; }; port@7 { dsp_b3: endpoint { remote-endpoint = <&dai3>; }; }; port@8 { dsp_b4: endpoint { remote-endpoint = <&dai4>; }; }; port@9 { dsp_b5: endpoint { remote-endpoint = <&dai5>; }; }; }; }; back-end { ports { port@0 { dai0: endpoint { remote-endpoint = <&dsp_b0>; }; }; port@1 { dai1: endpoint { remote-endpoint = <&dsp_b1>; }; }; port@2 { dai2: endpoint { remote-endpoint = <&dsp_b2>; }; }; port@3 { dai3: endpoint { remote-endpoint = <&dsp_b3>; }; }; port@4 { dai4: endpoint { remote-endpoint = <&dsp_b4>; }; }; port@5 { dai5: endpoint { remote-endpoint = <&dsp_b5>; }; }; }; };

5 30

[PATCH] ALSA: usb-audio: ignore broken processing/extension unit
by tom.ty89＠gmail.com 07 Oct '20

07 Oct '20

From: Tom Yan <tom.ty89(a)gmail.com> Some devices have broken extension unit where getting current value doesn't work. Attempt that once when creating mixer control for it. If it fails, just ignore it, so that it won't cripple the device entirely (and/or make the error floods). Signed-off-by: Tom Yan <tom.ty89(a)gmail.com> --- sound/usb/mixer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index eab0fd4fd7c3..e0b7174c1043 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2367,7 +2367,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, int num_ins; struct usb_mixer_elem_info *cval; struct snd_kcontrol *kctl; - int i, err, nameid, type, len; + int i, err, nameid, type, len, val; const struct procunit_info *info; const struct procunit_value_info *valinfo; const struct usbmix_name_map *map; @@ -2470,6 +2470,12 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, break; } + err = get_cur_ctl_value(cval, cval->control << 8, &val); + if (err < 0) { + usb_mixer_elem_info_free(cval); + return -EINVAL; + } + kctl = snd_ctl_new1(&mixer_procunit_ctl, cval); if (!kctl) { usb_mixer_elem_info_free(cval); -- 2.28.0

3 2

[PATCH] ASoC: hdac_hdmi: remove cancel_work_sync in runtime suspend
by Brent Lu 02 Oct '20

02 Oct '20

A deadlock is identified when there are three contexts running at the same time: - a HDMI jack work which is calling snd_soc_dapm_sync(). - user space is calling snd_pcm_release() to close pcm device. - pm is calling runtime suspend function of HDMI codec driver. By removing the clear_dapm_works() invocation in the hdac_hdmi_runtime_suspend() function, the snd_pcm_release() could always returns from dapm_power_widgets() function call without blocking the hdac_hdmi_jack_dapm_work() work thread or being blocked by the hdac_hdmi_runtime_suspend() function. The purpose of the jack work is to enable/disable the dapm jack pin so it's not necessary to cancel the work in runtime suspend function which is usually called when pcm device is closed. Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/soc/codecs/hdac_hdmi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index f26b77f..9052edd 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2097,8 +2097,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) if (!bus) return 0; - clear_dapm_works(hdev); - /* * Power down afg. * codec_read is preferred over codec_write to set the power state. -- 2.7.4

3 2

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel August 2020