July 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] [PATCH 1/1] ASoC: bcm2835-i2s: Support 384k sample rate
by Clive Messer 10 Nov '17

10 Nov '17

Add support for sample rates up to 384k to bcm2835-i2s driver, with SNDRV_PCM_RATE_CONTINUOUS and specifying 8k min and 384k max, for both playback and capture. Signed-off-by: Clive Messer <clive.messer(a)digitaldreamtime.co.uk> --- sound/soc/bcm/bcm2835-i2s.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index 6ba2049..4a67db2 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -578,7 +578,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .playback = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE @@ -586,7 +588,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .capture = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE -- 2.5.5

3 2

[alsa-devel] ASoC Sound Driver I2S over LPE, Intel Baytrail SoC. MinnowBoard Max
by Michael Pogrebinsky 02 Oct '17

02 Oct '17

Hi all, I have the MinnowBoard Max with Baytrail Atom (ValleyView) SoC. I'm attempting to write an Alsa (ASoC) driver for my sound card to work with this board. PCM should work through I2S for this sound card I have. >From my understanding Baytrail's I2S goes over LPE. I read this thread:https://www.mail-archive.com/elinux-minnowboard@lists.elinux.org/msg… So I understand that I need the 3 components for my ASoC driver. However I am having trouble at understanding how to communicate with the LPE to get the I2S working. Here is what I have done so far: I am running Ubuntu 14.04 LTS, kernel : 4.3.0-040300rc4 First of all I downloaded the firmware fw_sst_0f28.bin-48kHz_i2s_master fromhttps://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux… And put it /lib/firmware/intel/. Later I went to the Bios and enabled LPE in PCI mode. I do see the LPE controller now, but it shows as UNCLAIMED. Later I looked at the sound/soc/inte/baytrail/ and from my understanding in order for me to get the I2S working I need to load this module so I did modprobe snd-soc-sst-baytrail-pcm. Later I wrote a simple codec and machine driver (looking at the example of sound/soc/intel/boards/byt_max98090) however everytime I attempt to register the sound card with snd_soc_register_card, I get the following error message in dmesg : "ASoC: CPU DAI baytrail-pcm-audio not registered". >From this I deduct that although I loaded the snd-soc-sst-baytrail-pcm module, the driver has not actually been loaded. I'm clueless on how to proceed from here. I would highly appreciate your help.

3 7

[alsa-devel] [RFC PATCH 0/7] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 And now it transformed into this RFC, which would bring a ground for AC'97 devices closer to the linux device/driver model. This is just an RFC to see if we understand each other Mark. Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. Cheers. -- Robert Robert Jarzmik (7): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support ARM: pxa: mioa701 remove wm9713 from platform devices ASoC: mioa701_wm9713: convert to new ac97 bus ASoC: add new ac97 bus support arch/arm/mach-pxa/mioa701.c | 1 - include/sound/ac97/codec.h | 98 ++++++++++++ include/sound/ac97/compat.h | 21 +++ include/sound/ac97/controller.h | 39 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------- include/sound/pxa2xx-lib.h | 14 +- sound/Kconfig | 7 + sound/Makefile | 1 + sound/ac97/Kconfig | 9 ++ sound/ac97/Makefile | 5 + sound/ac97/ac97_core.h | 10 ++ sound/ac97/bus.c | 330 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 104 +++++++++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 31 ++-- sound/soc/Kconfig | 4 + sound/soc/codecs/wm9713.c | 62 +++++++- sound/soc/pxa/Kconfig | 4 +- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 12 +- 22 files changed, 1000 insertions(+), 273 deletions(-) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

3 29

Re: [alsa-devel] Dell USB audio driver workaround
by Takashi Iwai 20 Jun '17

20 Jun '17

On Wed, 06 Apr 2016 08:29:12 +0200, Kailang wrote: > > Hi Takashi, > > Dell had USB dock. > Maybe firmware issue, the master volume always keep at 0x57. > Attach patch will fix it to keep at Max volume. > > Could you help us to update it? Well, I don't get how this patch works.. > diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c > index 4f85757..84d9a4e 100644 > --- a/sound/usb/mixer.c > +++ b/sound/usb/mixer.c > @@ -846,6 +846,12 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, > { > struct snd_usb_audio *chip = cval->head.mixer->chip; > switch (chip->usb_id) { > + case USB_ID(0x0bda, 0x4014): /* Dell workaround */ > + if (strstr(kctl->id.name, "Playback Volume") != NULL) { > + cval->min = 0x0000; > + cval->max = 0x0000; > + } > + break; So, this means that this value has to be fixed to 0? If yes, can't we simply remove this volume instead? thanks, Takashi

4 16

[alsa-devel] [PATCH 0/7] of_graph: prepare for ALSA graph support
by Kuninori Morimoto 17 May '17

17 May '17

Hi Rob, Mark Cc Guennadi, Laurent Now OF graph is mainly used by V4L2 SoC, and ALSA SoC is using different style for SoC <-> Codec binding. But, for example, HDMI case, V4L2 <-> ALSA need to collaborate, and then ALSA SoC needs to adjust to OF graph. OTOH, V4L2's "OF graph" position is same as ALSA SoC "sound card" position. And ALSA SoC side want to keep existing supported feature on new OF graph style. I'm posting this on ALSA SoC ML now. Now, current of_graph is indicating port/endpoint, but there is no way to understand that it is for video port ? or sound port ? or other device port ? For example, HDMI has video port, and sound port. Because of this reason, ALSA SoC side can't handle OF graph correctly. Thus, this patch-set tries to add new "type" on OF graph. And this patch-set includes small feature which are useful for ALSA SoC side OF graph support. Kuninori Morimoto (7): Documentation: of: add type property of_graph: add of_graph_get_remote_endpoint() of_graph: add of_graph_port/endpoint_type_is() of_graph: add of_graph_get_endpoint_count() of_graph: add of_graph_get_port_parent() of_graph: add of_graph_get_top_port() of_graph: add for_each_of_port() / for_each_of_endpoint_in_port() Documentation/devicetree/bindings/graph.txt | 26 ++++ drivers/of/base.c | 196 ++++++++++++++++++++++++++-- include/linux/of_graph.h | 67 ++++++++++ 3 files changed, 279 insertions(+), 10 deletions(-) -- 1.9.1

3 12

[alsa-devel] [PATCH v2 1/2] ASoC: wm8960: Let wm8960 codec driver manage its own MCLK
by Zidan Wang 04 Apr '17

04 Apr '17

From: Zidan Wang <b50113(a)freescale.com> When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113(a)freescale.com> --- sound/soc/codecs/wm8960.c | 51 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 75cd7de..fd25973 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { + struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); @@ -618,14 +620,38 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - /* Set VMID to 2x50k */ - snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_STANDBY: + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + break; + + default: + break; + } + break; case SND_SOC_BIAS_STANDBY: @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int reg; + int reg, ret; switch (level) { case SND_SOC_BIAS_ON: @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); + + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } break; case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; + wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); + if (IS_ERR(wm8960->mclk)) { + if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); -- 1.9.1

5 10

[alsa-devel] Intel HDA audio on EEE PC 1101HGo
by Enrico Mioso 20 Jan '17

20 Jan '17

Hello guys. I am writing to you all to talk you about a strange behaviour of the Intel HDA Audio device on an EEE PC 1101H. The audio device at some point simply doesn't react to commands, giving in dmesgo utput like this: [22321.638079] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x00170503 [22322.641410] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00170503 This may happen when I boot the system up fresh (here there is no Windows and no hibernation), or when the controller goes to power-save. If I don't set a power save timeout, then the controller will not be recoverable if it gets stuck at boot. As a workaround, I set a very short timeout, so that when the controller fails to start audio, waiting some time and retrying will work. Preliminary infos: Card: HDA Intel MID Chip: Realtek ALC269; Thank you in advance for your help. Please keep me in CC - since I am not subscribed to any list. Enrico Here follows a lspci 00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH Poulsbo) (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f3f80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at c880 [size=8] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M] Region 3: Memory at f3f40000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Vendor Specific Information: Len=07 <?> Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel modules: gma500_gfx 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f3f38000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f0000000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 80000000-801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-fbefffff Prefetchable memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at b880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 (rev 07) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f3f37c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: lpc_sch Kernel modules: lpc_sch 00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller (rev 07) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: pata_sch Kernel modules: pata_sch, pata_acpi, ata_generic 01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0pcilib: sysfs_read_vpd: read failed: Connection timed out 000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0) Subsystem: ASUSTeK Computer Inc. Device 14e5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e880 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4122 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-25-f6-3a-90-e6-ba-ff Kernel driver in use: atl1c Kernel modules: atl1c

3 32

[alsa-devel] ASoC: fsl_sai: Has anybody attempted to run the i.MX6UL in TDM mode with channels > 2?
by Caleb Crome 19 Jan '17

19 Jan '17

Hi all, Now that the MX6 fsl_ssi seems to be getting stable for TDM with channels > 2 (thanks all!), the MX6 UL and MX7 have only the SAI port. Does anybody have experience with running the SAI with more than 2 channels? Any thoughts or comments would be welcome! Thanks, -Caleb

3 4