Alsa-devel July 2012

alsa-devel@alsa-project.org

105 participants
245 discussions

[alsa-devel] Usb audio - unsuported sampling rates
by Gordon Dilan 12 Feb '16

12 Feb '16

Hello, I'm using an usb mic which(according to it's producer should support up to 48kHz sampling rate). The problem is ALSA allows me to use only 16 kHz for this device. I do not want to resample the data, I want to sample it at 48kHz in order to be able to record some high pitch sounds 18-20kHz. I would want to try to do any modifications necessary in order to try support 48kHz, but I'm not sure where to start. Some information: cat /proc/asound/modules ... 1 snd_usb_audio arecord --list-devices **** List of CAPTURE Hardware Devices **** .... card 1: CameraB409241 [USB Camera-B4.09.24.1], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 when I try to use: arecord -v -D hw:1,0 -f S16_LE -c 4 -r 48000 gigi.wav I get this: Recording WAVE 'gigi.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Warning: rate is not accurate (requested = 48000Hz, got = 16000Hz) please, try the plug plugin Hardware PCM card 1 'USB Camera-B4.09.24.1' device 0 subdevice 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 4 rate : 16000 exact rate : 16000 (16000/1) msbits : 16 buffer_size : 8000 period_size : 2000 period_time : 125000 tstamp_mode : NONE period_step : 1 avail_min : 2000 period_event : 0 start_threshold : 1 stop_threshold : 8000 silence_threshold: 0 silence_size : 0 boundary : 2097152000 appl_ptr : 0 hw_ptr : 0 Any sampling rate I would try higher or lower than 16kHz, I will always get 16000 kHz. Some more information: lsusb Bus 001 Device 007: ID 1415:2000 Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc. Sony Playstation Eye lsusb -t /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/6p, 480M |__ Port 2: Dev 7, If 0, Class=vend., Driver=ov534, 480M |__ Port 2: Dev 7, If 1, Class=audio, Driver=snd-usb-audio, 480M |__ Port 2: Dev 7, If 2, Class=audio, Driver=snd-usb-audio, 480M At the moment I'm looking inside ALSA's source code to try to see from where this limitation of 16000kHz for my device appears, but I have to admit that I'm kind of lost. Any pointers on what direction should I go to try make my desired rate supported would be greatly appreciated! Thank you and best regards, Gordon

3 6

[alsa-devel] [PATCH 0/4] ASoC: fix saif record unwork issue
by Dong Aisheng 16 Jan '16

16 Jan '16

This patch series mainly fixes the saif record unwork issue. The root cause consists of: 1) clk_prepare and clk_enable un-balanced 2) missed setting a proper initial clock rate for saif in dt 3) sgtl5000 dapm widget kcontrol does not work So can not test record on mx28evk. 4) missed setting clkmux mode for saif in dt With this patch series it can fix sgtl5000 widget kcontrol unwork and saif record unwork issue. BTW, just let people konw, i still met a few overruns during record, that's another issue and will be fixed in separte patches later. Patch based on sound-2.6/for-3.6. Dong Aisheng (4): ASoC: mxs-saif: fix clock prepare and enable unbalance issue ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe ARM: mx28evk: add missed clkmux select for saif arch/arm/mach-mxs/mach-mxs.c | 3 +++ sound/soc/codecs/sgtl5000.c | 2 -- sound/soc/mxs/mxs-saif.c | 24 ++++++++++++++++++++++++ 3 files changed, 27 insertions(+), 2 deletions(-)

5 20

[alsa-devel] icon utrack pro usb audio interface
by Adrien Plisson 29 Aug '14

29 Aug '14

hello, i just bought an "icon utrack pro" usb audio interface <http://www.icon-global.com/ShowPro.aspx?ID=24>. as expected, this interface is not supported under linux: it is not usb audio class compliant, even the midi port is not class compliant... first, i would like to know if anybody ever managed to use this interface under linux: is there an existing driver ? a hack or patch that would allow the kernel to recognize this interface ? a specific module dedicated to this kind of interface ? i can't find any reference to this interface anywhere on the net... anyway, while searching, i found that its firewire counterpart, the "firexon", has an experimental support on ffado. it seems that the firewire interface uses the bridgeco BeBoB chipset. given that some versions of BeBoB supports both firewire and usb, i suppose (but i may be wrong) that the "utrack pro" is also based on BeBoB. is there any other BeBoB based usb interface supported under linux ? finally, i would proudly help the development of a specific driver for this interface: if anyone wants me to test some piece of code, or wants some information on this interface, don't hesitate to contact me. i am also a software developper, so i could help writing a module, but i first need to learn more about the alsa code base (actually, i don't know where to start...). thanks a lot, and have a nice day ! -- rien

3 3

[alsa-devel] wm8974 and sam9g45 atmel
by Michele Da Rold 11 Jul '14

11 Jul '14

Hello everybody, I'm starting a new development with a Atmel SAM9G45 and a WM8974. I'm using kernel 2.6.33.2 I have connected the SSC1 pin TD,TF,TK and the RD pin, so I want to use WM8974 like a slave. I wrote a interface driver based on sam9263_wm8731.c The driver seem to load ok, I recognize the codec but when I start a mp3 playing (I use mpg123) the playback not start. Putting some dedug messagge the driver not call the function "set_bias_level", and call the mute function with mute=0. Testing the MCLK signal I not see any clock on pin because I never call clk_enable!! There is a way to identify the problem? Someone could help me? Thank you in advance Michele Da Rold I put the code of driver (don't care about printk I used it for debug purpose!!) /* * sam9g45_wm8974 -- SoC audio for AT91SAM9G20-based * ATMEL AT91SAM9G20ek board. * * Copyright (C) 2005 SAN People * Copyright (C) 2008 Atmel * * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> * * Based on sam9263_wm8731.c. * Frank Mandarino <fmandarino(a)endrelia.com> * Copyright 2006 Endrelia Technologies Inc. * Based on corgi.c by: * Copyright 2005 Wolfson Microelectronics PLC. * Copyright 2005 Openedhand Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/clk.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/atmel-ssc.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-dapm.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/gpio.h> #include "../codecs/wm8974.h" #include "atmel-pcm.h" #include "atmel_ssc_dai.h" #define MCLK_RATE 12000000 /* * As shipped the board does not have inputs. However, it is relatively * straightforward to modify the board to hook them up so support is left * in the driver. */ #undef ENABLE_MIC_INPUT #define ENABLE_MIC_INPUT 1 static struct clk *mclk; static int at91sam9g45ek_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; int ret; printk(KERN_DEBUG "at91sam9g45_wm8974 " ": at91sam9g45ek_hw_params() called\n"); /* set codec DAI configuration */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS/*SND_SOC_DAIFMT_CBM_CFM*/); if (ret < 0) return ret; /* set cpu DAI configuration */ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS/*SND_SOC_DAIFMT_CBM_CFM*/); if (ret < 0) return ret; return 0; } static struct snd_soc_ops at91sam9g45ek_ops = { .hw_params = at91sam9g45ek_hw_params, }; static int at91sam9g45ek_set_bias_level(struct snd_soc_card *card, enum snd_soc_bias_level level) { static int mclk_on; int ret = 0; printk(KERN_DEBUG "at91sam9g45_wm8974 " ": at91sam9g45ek_set_bias_level() called %d\n",level); switch (level) { case SND_SOC_BIAS_ON: case SND_SOC_BIAS_PREPARE: if (!mclk_on) ret = clk_enable(mclk); if (ret == 0) mclk_on = 1; break; case SND_SOC_BIAS_OFF: case SND_SOC_BIAS_STANDBY: if (mclk_on) clk_disable(mclk); mclk_on = 0; break; } return ret; } #if 0 static const struct snd_soc_dapm_widget at91sam9g45ek_dapm_widgets[] = { SND_SOC_DAPM_MIC("Int Mic", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), }; static const struct snd_soc_dapm_route intercon[] = { /* Speaker output mixer */ {"Speaker Mixer", "PCM Playback Switch", "DAC"}, {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, /* speaker connected to SPKOUTP */ {"SpkN Out", NULL, "Speaker Mixer"}, {"SpkP Out", NULL, "Speaker Mixer"}, {"SPKOUTN", NULL, "SpkN Out"}, {"SPKOUTP", NULL, "SpkP Out"}, /* Input PGA */ {"Input PGA", "Aux Switch", "Aux Input"}, {"Input PGA", "MicN Switch", "MICN"}, {"Input PGA", "MicP Switch", "MICP"}, }; /* * Logic for a wm974 as connected on a at91sam9g45ek board. */ static int at91sam9g45ek_wm8974_init(struct snd_soc_codec *codec) { struct snd_soc_dai *codec_dai = &codec->dai[0]; int ret; printk(KERN_DEBUG "at91sam9g45_wm8974 " ": at91sam9g45_wm8974_init() called\n"); /* ret = snd_soc_dai_set_sysclk(codec_dai, 0, MCLK_RATE, SND_SOC_CLOCK_IN); if (ret < 0) { printk(KERN_ERR "Failed to set WM8974 SYSCLK: %d\n", ret); return ret; } */ /* Add specific widgets */ snd_soc_dapm_new_controls(codec, at91sam9g45ek_dapm_widgets, ARRAY_SIZE(at91sam9g45ek_dapm_widgets)); /* Set up specific audio path interconnects */ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); /* not connected */ snd_soc_dapm_nc_pin(codec, "MONOOUT"); snd_soc_dapm_nc_pin(codec, "AUX"); #ifdef ENABLE_MIC_INPUT snd_soc_dapm_enable_pin(codec, "Int Mic"); #else snd_soc_dapm_nc_pin(codec, "Int Mic"); #endif /* always connected */ snd_soc_dapm_enable_pin(codec, "Ext Spk"); snd_soc_dapm_sync(codec); return 0; } #endif static struct snd_soc_dai_link at91sam9g45ek_dai = { .name = "WM8974", .stream_name = "WM8974 PCM", .cpu_dai = &atmel_ssc_dai[1], .codec_dai = &wm8974_dai, #if 0 .init = at91sam9g45ek_wm8974_init, #endif .ops = &at91sam9g45ek_ops, }; static struct snd_soc_card snd_soc_at91sam9g45ek = { .name = "AT91SAMG45", .platform = &atmel_soc_platform, .dai_link = &at91sam9g45ek_dai, .num_links = 1, .set_bias_level = at91sam9g45ek_set_bias_level, }; static struct snd_soc_device at91sam9g45ek_snd_devdata = { .card = &snd_soc_at91sam9g45ek, .codec_dev = &soc_codec_dev_wm8974, }; static struct platform_device *at91sam9g45ek_snd_device; static int __init at91sam9g45ek_init(void) { struct atmel_ssc_info *ssc_p = at91sam9g45ek_dai.cpu_dai->private_data; struct ssc_device *ssc = NULL; struct clk *main; int ret; at91_set_A_periph(AT91_PIN_PD27, 0); /* * Codec MCLK is supplied by PCK1 - set it up. */ mclk = clk_get(NULL, "pck1"); if (IS_ERR(mclk)) { printk(KERN_ERR "ASoC: Failed to get MCLK\n"); ret = PTR_ERR(mclk); goto err; } main = clk_get(NULL, "main"); if (IS_ERR(main)) { printk(KERN_ERR "ASoC: Failed to get PLLB\n"); ret = PTR_ERR(mclk); goto err_mclk; } ret = clk_set_parent(mclk, main); clk_put(main); if (ret != 0) { printk(KERN_ERR "ASoC: Failed to set MCLK parent\n"); goto err_mclk; } clk_set_rate(mclk, MCLK_RATE); /* * Request SSC device */ ssc = ssc_request(1); if (IS_ERR(ssc)) { printk(KERN_ERR "ASoC: Failed to request SSC 1\n"); ret = PTR_ERR(ssc); ssc = NULL; goto err_ssc; } ssc_p->ssc = ssc; at91sam9g45ek_snd_device = platform_device_alloc("soc-audio", -1); if (!at91sam9g45ek_snd_device) { printk(KERN_ERR "ASoC: Platform device allocation failed\n"); ret = -ENOMEM; } platform_set_drvdata(at91sam9g45ek_snd_device, &at91sam9g45ek_snd_devdata); at91sam9g45ek_snd_devdata.dev = &at91sam9g45ek_snd_device->dev; ret = platform_device_add(at91sam9g45ek_snd_device); if (ret) { printk(KERN_ERR "ASoC: Platform device allocation failed\n"); platform_device_put(at91sam9g45ek_snd_device); } return ret; err_ssc: ssc_free(ssc); ssc_p->ssc = NULL; err_mclk: clk_put(mclk); mclk = NULL; err: return ret; } static void __exit at91sam9g45ek_exit(void) { struct atmel_ssc_info *ssc_p = at91sam9g45ek_dai.cpu_dai->private_data; struct ssc_device *ssc; if (ssc_p != NULL) { ssc = ssc_p->ssc; if (ssc != NULL) ssc_free(ssc); ssc_p->ssc = NULL; } platform_device_unregister(at91sam9g45ek_snd_device); at91sam9g45ek_snd_device = NULL; clk_put(mclk); mclk = NULL; } module_init(at91sam9g45ek_init); module_exit(at91sam9g45ek_exit); /* Module information */ MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); MODULE_DESCRIPTION("ALSA SoC AT91SAM9G45_WM8974"); MODULE_LICENSE("GPL");

3 8

[alsa-devel] how to create alsa nodes?
by loody 12 Dec '13

12 Dec '13

Dear all: In destop x86 system, the udev will automatically create the nodes in snd directory, such as pcmC0D0c, pcmC0D1c, etc. I try to let the usb sound device work on mips platform, but I have no idea what is the proper way to create these nodes. Should I 1. create them one by one by hand from copying the attributes in my PC (if I have 2 or more usb sound devices, I have to first plug them in pc and monitor the nodes) 2. smarter way to do so? -- Regards, miloody

7 19

[alsa-devel] alsa/asoundlib.h file not found
by Appalayagari Sreedhar 05 Dec '13

05 Dec '13

Hi, I have integrated the codec driver and the kernel log shows the sound card is detected. now i want to test the codec. i tried the sample test code for capture and playback. i am getting a compilation errors due to the asoundlib.h. please find the error log for my application. main.c:2:23: error: asoundlib.h: No such file or directory main.c: In function 'main': main.c:7: error: 'snd_pcm_t' undeclared (first use in this function) main.c:7: error: (Each undeclared identifier is reported only once main.c:7: error: for each function it appears in.) main.c:7: error: 'pcm_handle' undeclared (first use in this function) main.c:10: error: 'snd_pcm_stream_t' undeclared (first use in this function) main.c:10: error: expected ';' before 'stream' main.c:15: error: 'snd_pcm_hw_params_t' undeclared (first use in this function) main.c:15: error: 'hwparams' undeclared (first use in this function) main.c:22: warning: 'return' with a value, in function returning void main.c:34: error: 'snd_pcm_uframes_t' undeclared (first use in this function) main.c:34: error: expected ';' before 'periodsize' main.c:46: error: 'SND_PCM_ACCESS_RW_INTERLEAVED' undeclared (first use in this function) main.c:48: warning: 'return' with a value, in function returning void main.c:52: error: 'SND_PCM_FORMAT_S16_LE' undeclared (first use in this function) main.c:54: warning: 'return' with a value, in function returning void main.c:62: warning: 'return' with a value, in function returning void main.c:65:19: warning: missing terminating " character main.c:65: error: missing terminating " character main.c:66: error: expected expression before '==' token main.c:66: error: stray '\' in program main.c:66:31: warning: missing terminating " character main.c:66: error: missing terminating " character main.c:67: error: expected ';' before '}' token main.c:72: warning: 'return' with a value, in function returning void main.c:78: warning: 'return' with a value, in function returning void main.c:86: error: 'periodsize' undeclared (first use in this function) main.c:88: warning: 'return' with a value, in function returning void main.c:99: warning: 'return' with a value, in function returning void main.c:112: warning: incompatible implicit declaration of built-in function 'malloc' main.c:115: error: 'num_frames' undeclared (first use in this function) main.c:5: warning: return type of 'main' is not 'int' please suggest what needs to be done to resolve this issue asap. Thank you, Sreedhar.

5 4

[alsa-devel] Fwd: Re: Realtek ALC889: HDA Intel and kernel 3.1 gives choppy sound (again)
by Colomban Wendling 18 Sep '13

18 Sep '13

Here's my initial mail, but with gzipped outputs. Regards, Colomban -------- Message original -------- Sujet: Re: [alsa-devel] Realtek ALC889: HDA Intel and kernel 3.1 gives choppy sound (again) Date : Thu, 10 Nov 2011 02:11:17 +0100 De : Colomban Wendling <lists.ban(a)herbesfolles.org> Pour : Takashi Iwai <tiwai(a)suse.de> Copie à : alsa-devel(a)alsa-project.org Hi again, and sorry for the delay. Le 08/11/2011 07:32, Takashi Iwai a écrit : > At Mon, 07 Nov 2011 23:45:40 +0100, > Colomban Wendling wrote: >> >> Hi, >> >> Back to 3.0, the sound on my soundcard [1] started to be choppy, I >> reported it [2] and it got fixed (thanks to Takashi Iwai!). >> >> However, the story repeated with 3.1 (and probably 3.0.8 or before [3]): >> I've got similar choppy sound again. >> >> I bisected the few commits that happened on >> sound/pci/hda/patch_realtek.c, and finally found the villain: >> >> "8974bd51 ALSA: hda/realtek - Fix auto-mute with HP+LO configuration" >> >> Reverting it from v3.1 fixes the problem. > > Does it? Very weird. This patch has nothing to do with the HD-audio > controller side but purely a codec change. Yep, I just check once again and it really fixes the problem here. >> master (94956ee) also suffers of the problem, but I couldn't test >> without that commit because reverting it fails, too much changes happened. > > Did you try to pass position_fix=1 (or 2) option? > Also, passing enable_msi=0 (or 1) may change anything? I just tried with the 3 kernels: * vanilla v3.1 * vanilla 3.2-rc1 (master at 1ea6b8f) * v3.1 with 8974bd51 reverted and none of the option changed anything: both vanilla always failed, the third always succeeded. Though, I haven't combined the options, just tried each at once. > In anyway, please give alsa-info.sh output again with the fresh > kernel. Run it with --no-upload option and attach the output. Here it is, for the 3 kernels cited above. Regards, Colomban

4 14

[alsa-devel] Support new HDA codec
by Jorge Fernandez Monteagudo 26 Aug '13

26 Aug '13

Hi all, This is my first email to the devel mailing list. I'm asking the same question in the user mailing list but I suspect that I'll have to add some code in order to get this hda codec from Wolfson to work. Attached is the log I get from alsa-info.sh. This codec has three output paths: 1) Node 0x06, DAC1, and Node 0x11, Port A, the stereo headphone playback, which is the default one and it seems it works because I can see the stream set to 5 when a sound is played. 2) Node 0x04, SPDIF Tx1, and Node 0x0f, SPDIF OUT, the SPDIF transmit functionality provides an IEC-60958-3 compatible S/PIDF output which I would like to enable but without luck yet. I can enable the node 0x04, with hda-verb, and the spdif amplifier receives spdif frames but without audio info. 3) Node 0x07, DAC2, and Node 0x12, Port G, the stereo line playback with a differential stereo output wich I would like to enable but without luck again. I just can mute/unmute the node but without effect in the outputs. I would like to know if I have to develop a patch for this device or with the attached log info I can expect to use it with the current code in kernel. Now, with alsamixer and other config tools I can't see any control related to the outputs for 2) and 3)... Any hint is welcome! Thanks Jorge --- upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Tue Feb 21 09:44:41 UTC 2012 !!Linux Distribution !!------------------ Ubuntu 11.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 11.10" !!DMI Information !!--------------- Manufacturer: nVidia Product Name: MMP9-ION Product Version: To Be Filled By O.E.M. !!Kernel Information !!------------------ Kernel release: 3.0.0-12-generic Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.24.1 Utilities version: 1.0.24.2 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfae78000 irq 20 !!PCI Soundcards installed in the system !!-------------------------------------- 00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:08.0 0403: 10de:0ac0 (rev b1) Subsystem: 10de:cb84 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-caiaq: index=-2 snd-usb-ua101: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 snd-usb-audio: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Wolfson Microelectronics ID 8800 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x1aec8800 Subsystem Id: 0x00000100 Revision Id: 0x100301 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x01, mute=1 GPIO: io=2, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0 Node 0x02 [Audio Input] wcaps 0x1005d1: Stereo Device: name="HDA Generic", type="Audio", device=0 Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x1ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=02, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0a Processing caps: benign=0, ncoeff=0 Node 0x03 [Audio Input] wcaps 0x1005d1: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=03, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x09 Processing caps: benign=0, ncoeff=0 Node 0x04 [Audio Output] wcaps 0x2d1: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=04, enabled=0 Processing caps: benign=0, ncoeff=0 Node 0x05 [Audio Input] wcaps 0x1003d1: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Copyright Digital category: 0x0 PCM: rates [0x1f0]: 32000 44100 48000 88200 96000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=05, enabled=0 Connection: 1 0x10 Processing caps: benign=0, ncoeff=0 Node 0x06 [Audio Output] wcaps 0x495: Stereo Amp-Out Control: name="Master Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Master Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="HDA Generic", type="Audio", device=0 Amp-Out caps: N/A Amp-Out vals: [0x57 0x57] Converter: stream=5, channel=0 PCM: rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=06, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x07 [Audio Output] wcaps 0x495: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 PCM: rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=07, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x08 [Audio Output] wcaps 0x495: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 PCM: rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=08, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x09 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x0b* 0x0e Node 0x0a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x18, nsteps=0x30, stepsize=0x01, mute=1 Amp-Out vals: [0x18 0x18] Connection: 1 0x0c Node 0x0b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x18, nsteps=0x30, stepsize=0x01, mute=1 Amp-Out vals: [0x98 0x98] Connection: 1 0x0d Node 0x0c [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00000064: IN Detect Balanced Pin Default 0x018130f0: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=0c, enabled=0 Node 0x0d [Pin Complex] wcaps 0x400083: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Pincap 0x00001767: IN Detect Balanced Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=0d, enabled=0 Node 0x0e [Pin Complex] wcaps 0x40020b: Stereo Digital Amp-In Amp-In caps: ofs=0x18, nsteps=0x58, stepsize=0x01, mute=1 Amp-In vals: [0x18 0x18] Pincap 0x00000020: IN Pin Default 0x10a600f0: [Jack] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x0f [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x014190f0: [Jack] SPDIF Out at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=0f, enabled=0 Connection: 1 0x04 Node 0x10 [Pin Complex] wcaps 0x400281: Stereo Digital Pincap 0x00000020: IN Pin Default 0x01c520f0: [Jack] SPDIF In at Ext Rear Conn = Optical, Color = Grey DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=10, enabled=0 Node 0x11 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=11, enabled=0 Connection: 1 0x06 Node 0x12 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x01016121: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=12, enabled=0 Connection: 1 0x07 Node 0x13 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x01011022: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=13, enabled=0 Connection: 1 0x08 Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x04, nsteps=0x04, stepsize=0x17, mute=0 Amp-Out vals: [0x04] Node 0x15 [Audio Input] wcaps 0x1003d1: Stereo Digital Converter: stream=0, channel=2 Digital: Digital category: 0x0 PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=15, enabled=0 Connection: 1 0x16 Processing caps: benign=0, ncoeff=0 Node 0x16 [Pin Complex] wcaps 0x40030b: Stereo Digital Amp-In Amp-In caps: ofs=0x18, nsteps=0x58, stepsize=0x01, mute=1 Amp-In vals: [0x18 0x18] Pincap 0x00000030: IN OUT Pin Default 0x10a601f0: [Jack] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Connection: 1 0x17 Node 0x17 [Audio Output] wcaps 0x291: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Unsolicited: tag=17, enabled=0 --endcollapse-- !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 20' Mixer name : 'Wolfson Microelectronics ID 8800' Components : 'HDA:1aec8800,00000100,00100301' Controls : 3 Simple ctrls : 2 Simple mixer control 'Master',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 87 [69%] [-20.00dB] [on] Front Right: Playback 87 [69%] [-20.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] !!Alsactl output !!------------- --startcollapse-- state.NVidia { control.1 { iface MIXER name 'Master Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.2 { iface MIXER name 'Master Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -6350 dbmax 0 dbvalue.0 -2000 dbvalue.1 -2000 } } control.3 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 5 Feb 21 09:38 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 4 Feb 21 09:38 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 3 Feb 21 09:38 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 2 Feb 21 09:39 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 1 Feb 21 09:37 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Feb 21 09:37 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Feb 21 09:38 . drwxr-xr-x 3 root root 180 Feb 21 09:38 .. lrwxrwxrwx 1 root root 12 Feb 21 09:38 pci-0000:00:08.0 -> ../controlC0 Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o CONFIDENCIAL. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.

4 6

[alsa-devel] hda-intel missing mixer channels
by Orm Finnendahl 26 Aug '13

26 Aug '13

Hi, I sent this to alsa-user a week ago but didn't get any reply. Does anybody know, what is responsible for the missing faders? Did the driver change or is it some module loading mechanism in the distro which prevents the faders from showing up in alsamixer? This is so strange. Please help! -- Orm -------------------------------------------------------------------- Hi everybody, after the last update of Ubuntu (intrepid to jaunty) on my Lenovo Ideapad my microphone input doesn't work anymore (neither internal nor external). I found out that alsamixer lacks quite a lot of faders in the newer kernel/module compared to the older one. Some of the faders now unavailable were crucial for Mic input to work on the older system so I'd very much like to get them back ;-) Some more infos: Soundcard: Intel 82801G (ICH7 Family) Chip: Realtek ALC269 Module: snd_hda_intel (in both kernels) Older kernel: Ubuntu stock 2.6.27-14-generic Newer kernel: Ubuntu stock 2.6.28-13-rt Is there any way to make the missing controls available or did the driver change and I have to compile the older driver for the new kernel? Yours, Orm

2 3

[alsa-devel] Problem with MX27 ASoC audio
by Randolph Chung 11 Jul '13

11 Jul '13

I have a target that uses iMX27(L) + tlv320aic3x. The kernel tree is HEAD of linux-arm from about a week ago. Simple playback and recording (using aplay and arecord) work fine. However, I've run into a strange problem when both playback and capture streams are opened at the same time. Consider the attached test program. The capture device is setup with a period time of 10ms, and the program reads samples in a loop. The expected result is that I get a sample every 10ms. This works fine if the playback device is *not* opened (more specifically, if the hw_params are not set). However if the playback device is opened (#if 1 code) then I get samples every 20ms, which seems very wrong. I have tried using both DMA and FIQ ssi-pcm interfaces and both give the same strange result. With the FIQ driver, if I instrument the timer callback, the timer triggers every 10ms but there is only enough data every 20ms. The codec is being driven with a 13MHz MCLK (output from MX27) and the BCLK and WCLK come from the codec. They seem to have the correct rates. Any ideas? Can anybody else with MX27 hardware verify if my test program also fails on their target? thanks, randolph /* Test program */ #include <alsa/asoundlib.h> #include <stdio.h> #include <stdlib.h> #include <assert.h> #include <sys/time.h> int main(int argc, char **argv) { int err = -1; char buf[4096]; unsigned long period_size; snd_pcm_t *in_handle = NULL, *out_handle; snd_pcm_hw_params_t *hwparams; if (snd_pcm_open(&in_handle, "hw:0,0", SND_PCM_STREAM_CAPTURE, 0) < 0) { printf("Cannot open capture device\n"); return -1; } snd_pcm_hw_params_malloc(&hwparams); snd_pcm_hw_params_any(in_handle, hwparams); snd_pcm_hw_params_set_access(in_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED); snd_pcm_hw_params_set_format(in_handle, hwparams, SND_PCM_FORMAT_S16_LE); snd_pcm_hw_params_set_channels(in_handle, hwparams, 1); snd_pcm_hw_params_set_rate(in_handle, hwparams, 8000, 0); snd_pcm_hw_params_set_period_time(in_handle, hwparams, 10000, 0); snd_pcm_hw_params_get_period_size(hwparams, &period_size, 0); snd_pcm_hw_params(in_handle, hwparams); snd_pcm_hw_params_free(hwparams); if (snd_pcm_open(&out_handle, "hw:0,0", SND_PCM_STREAM_PLAYBACK, 0) < 0) { printf("Cannot open playback device\n"); return -1; } #if 1 snd_pcm_hw_params_malloc(&hwparams); snd_pcm_hw_params_any(out_handle, hwparams); snd_pcm_hw_params_set_access(out_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED); snd_pcm_hw_params_set_format(out_handle, hwparams, SND_PCM_FORMAT_S16_LE); snd_pcm_hw_params_set_channels(out_handle, hwparams, 1); snd_pcm_hw_params_set_rate(out_handle, hwparams, 8000, 0); snd_pcm_hw_params_set_period_time(out_handle, hwparams, 10000, 0); snd_pcm_hw_params(out_handle, hwparams); snd_pcm_hw_params_free(hwparams); #endif printf("period size = %u\n", period_size); printf("Config done, start loop\n"); while (1) { struct timeval tv; int ret = snd_pcm_readi(in_handle, buf, period_size); if (ret < 0) snd_pcm_prepare(in_handle); gettimeofday(&tv, NULL); printf("[%u.%06u] snd_pcm_readi() return %d\n", tv.tv_sec, tv.tv_usec, ret); } return 0; }

5 11

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel July 2012