April 2011 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] how to create alsa nodes?
by loody 12 Dec '13

12 Dec '13

Dear all: In destop x86 system, the udev will automatically create the nodes in snd directory, such as pcmC0D0c, pcmC0D1c, etc. I try to let the usb sound device work on mips platform, but I have no idea what is the proper way to create these nodes. Should I 1. create them one by one by hand from copying the attributes in my PC (if I have 2 or more usb sound devices, I have to first plug them in pc and monitor the nodes) 2. smarter way to do so? -- Regards, miloody

7 19

[alsa-devel] hda-intel missing mixer channels
by Orm Finnendahl 26 Aug '13

26 Aug '13

Hi, I sent this to alsa-user a week ago but didn't get any reply. Does anybody know, what is responsible for the missing faders? Did the driver change or is it some module loading mechanism in the distro which prevents the faders from showing up in alsamixer? This is so strange. Please help! -- Orm -------------------------------------------------------------------- Hi everybody, after the last update of Ubuntu (intrepid to jaunty) on my Lenovo Ideapad my microphone input doesn't work anymore (neither internal nor external). I found out that alsamixer lacks quite a lot of faders in the newer kernel/module compared to the older one. Some of the faders now unavailable were crucial for Mic input to work on the older system so I'd very much like to get them back ;-) Some more infos: Soundcard: Intel 82801G (ICH7 Family) Chip: Realtek ALC269 Module: snd_hda_intel (in both kernels) Older kernel: Ubuntu stock 2.6.27-14-generic Newer kernel: Ubuntu stock 2.6.28-13-rt Is there any way to make the missing controls available or did the driver change and I have to compile the older driver for the new kernel? Yours, Orm

2 3

[alsa-devel] Problem with MX27 ASoC audio
by Randolph Chung 11 Jul '13

11 Jul '13

I have a target that uses iMX27(L) + tlv320aic3x. The kernel tree is HEAD of linux-arm from about a week ago. Simple playback and recording (using aplay and arecord) work fine. However, I've run into a strange problem when both playback and capture streams are opened at the same time. Consider the attached test program. The capture device is setup with a period time of 10ms, and the program reads samples in a loop. The expected result is that I get a sample every 10ms. This works fine if the playback device is *not* opened (more specifically, if the hw_params are not set). However if the playback device is opened (#if 1 code) then I get samples every 20ms, which seems very wrong. I have tried using both DMA and FIQ ssi-pcm interfaces and both give the same strange result. With the FIQ driver, if I instrument the timer callback, the timer triggers every 10ms but there is only enough data every 20ms. The codec is being driven with a 13MHz MCLK (output from MX27) and the BCLK and WCLK come from the codec. They seem to have the correct rates. Any ideas? Can anybody else with MX27 hardware verify if my test program also fails on their target? thanks, randolph /* Test program */ #include <alsa/asoundlib.h> #include <stdio.h> #include <stdlib.h> #include <assert.h> #include <sys/time.h> int main(int argc, char **argv) { int err = -1; char buf[4096]; unsigned long period_size; snd_pcm_t *in_handle = NULL, *out_handle; snd_pcm_hw_params_t *hwparams; if (snd_pcm_open(&in_handle, "hw:0,0", SND_PCM_STREAM_CAPTURE, 0) < 0) { printf("Cannot open capture device\n"); return -1; } snd_pcm_hw_params_malloc(&hwparams); snd_pcm_hw_params_any(in_handle, hwparams); snd_pcm_hw_params_set_access(in_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED); snd_pcm_hw_params_set_format(in_handle, hwparams, SND_PCM_FORMAT_S16_LE); snd_pcm_hw_params_set_channels(in_handle, hwparams, 1); snd_pcm_hw_params_set_rate(in_handle, hwparams, 8000, 0); snd_pcm_hw_params_set_period_time(in_handle, hwparams, 10000, 0); snd_pcm_hw_params_get_period_size(hwparams, &period_size, 0); snd_pcm_hw_params(in_handle, hwparams); snd_pcm_hw_params_free(hwparams); if (snd_pcm_open(&out_handle, "hw:0,0", SND_PCM_STREAM_PLAYBACK, 0) < 0) { printf("Cannot open playback device\n"); return -1; } #if 1 snd_pcm_hw_params_malloc(&hwparams); snd_pcm_hw_params_any(out_handle, hwparams); snd_pcm_hw_params_set_access(out_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED); snd_pcm_hw_params_set_format(out_handle, hwparams, SND_PCM_FORMAT_S16_LE); snd_pcm_hw_params_set_channels(out_handle, hwparams, 1); snd_pcm_hw_params_set_rate(out_handle, hwparams, 8000, 0); snd_pcm_hw_params_set_period_time(out_handle, hwparams, 10000, 0); snd_pcm_hw_params(out_handle, hwparams); snd_pcm_hw_params_free(hwparams); #endif printf("period size = %u\n", period_size); printf("Config done, start loop\n"); while (1) { struct timeval tv; int ret = snd_pcm_readi(in_handle, buf, period_size); if (ret < 0) snd_pcm_prepare(in_handle); gettimeofday(&tv, NULL); printf("[%u.%06u] snd_pcm_readi() return %d\n", tv.tv_sec, tv.tv_usec, ret); } return 0; }

5 11

[alsa-devel] USB Quirks for Boss JS-8
by Keith A. Milner 14 Apr '13

14 Apr '13

Hi, I'm looking at developing a quirk for the Boss JS-8. The lsusb is as follows: Bus 001 Device 003: ID 0582:0109 Roland Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x0582 Roland Corp. idProduct 0x0109 bcdDevice 0.01 iManufacturer 1 BOSS iProduct 2 JS-8 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 167 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 06 24 f1 01 00 00 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 01 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0070 1x 112 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 ** UNRECOGNIZED: 07 24 01 07 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 37 Transfer Type Isochronous Synch Type Asynchronous Usage Type Implicit feedback Data wMaxPacketSize 0x0070 1x 112 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 06 24 f1 02 02 02 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 8 Mass Storage bDeviceSubClass 6 SCSI bDeviceProtocol 80 Bulk (Zip) bMaxPacketSize0 64 bNumConfigurations 0 Device Status: 0x0001 Self Powered I wasn't entirely sure about the quirk syntax as the two interfaces are at EP 4 and EP5. Does this mean I need to ignore the (non-existant) lower interfaces? Here's what I came up with: { /* Boss JS-8 Jam Station */ USB_DEVICE(0x0582, 0x0109), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { /* .vendor_name = "BOSS", */ /* .product_name = "JS-8", */ .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_COMPOSITE, .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 1, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 2, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 3, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 4, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 5, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = -1 } } } }, regards, -- Keith A. Milner

5 9

[alsa-devel] sound: usb-audio: full capture/playback/spdif support for Digidesign Mbox 2
by Damien Zammit 22 Dec '12

22 Dec '12

Hi folks, I have put together full support for Digidesign Mbox 2, but it needs someone to help me merge it into alsa. I haven't seen the latest snd-usb-audio code since last year, it seems to have branched into multiple files. I have worked out how the Digidesign Mbox 2 needs to be configured, it supports SPDIF i/o simultaneously with analogue but can be toggled on and off by using different altsettings. Also the sample clock rate must be configured via a special method. Therefore I have provided for this in a device_setup parameter with 4 settings: 48Khz Spdif+analog = 0 44.1Khz Spdif+analog = 1 48Khz Analog only = 2 44.1Khz Analog only = 3 ###### audio /* Digidesign Mbox 2 workaround: * supports S24_3BE BIG ENDIAN in an unusual way */ if (chip->usb_id == USB_ID(0x0dba, 0x3000)) pcm_format = SNDRV_PCM_FORMAT_S24_3BE; static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip, int iface, int altno); static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) { ..... ..... /* Digidesign Mbox 2: skip altsets incompatible with device_setup */ if (chip->usb_id == USB_ID(0x0dba, 0x3000) && mbox2_skip_setting_quirk(chip, iface_no, altno)) continue; ..... } #define MBOX2_SET_48K_SPDIF 0 #define MBOX2_SET_44K_SPDIF 1 #define MBOX2_SET_48K_ANALOG 2 #define MBOX2_SET_44K_ANALOG 3 static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip, int iface, int altno) { u8 srate[3]; /* Reset ifaces 2-5 to 0 altsetting. */ usb_set_interface(chip->dev, iface, 0); if (device_setup[chip->index] == MBOX2_SET_48K_SPDIF || device_setup[chip->index] == MBOX2_SET_48K_ANALOG) { //setup 48k srate[0]=0x80; srate[1]=0xbb; srate[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x01, 0x22, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003, 1000); snd_printk(KERN_INFO "Digidesign Mbox 2: 24 Bit 48000Hz"); if (device_setup[chip->index] == MBOX2_SET_48K_SPDIF) { //setup spdif snd_printk(KERN_INFO ", SPDIF\n"); if (altno != 2) return 1; } else { //setup analog snd_printk(KERN_INFO ", ANALOGUE\n"); if (altno != 3) return 1; } } else { //setup 44k srate[0]=0x44; srate[1]=0xac; srate[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x01, 0x22, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003, 1000); snd_printk(KERN_INFO "Digidesign Mbox 2: 24 Bit 44100Hz"); if (device_setup[chip->index] == MBOX2_SET_44K_SPDIF || device_setup[chip->index] == MBOX2_SET_44K_ANALOG) { //setup spdif snd_printk(KERN_INFO ", SPDIF\n"); if (altno != 2) return 1; } else { //setup analog snd_printk(KERN_INFO ", ANALOGUE\n"); if (altno != 3) return 1; } } return 0; } #define MBOX2_FIRMWARE_SIZE 646 #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; int err; u8 enablemagic[3]; u8 bootresponse; int fwsize; if ((fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength)) == MBOX2_FIRMWARE_SIZE) { snd_printdd("Sending Digidesign Mbox 2 boot sequence...\n"); /* From USB Snoop, * * SetupPacket = RT RQ VHVL INDX SIZE * RT = 0xRT Request Type * RQ = 0xRQ Request * VHVL = 0xVLVH Value in reverse byte order * INDX = 0xDXIN Index in reverse byte order * SIZE = 0xZESI Size in reverse byte order * * Magic boot code setup packet: c0 85 01 00 00 00 12 00 * RQ RT VLVH DXIN ZESI * becomes 0x85, 0xc0, 0x0001, 0x0000, &RETURNDATA, 0x0012, TIMEOUT * for snd_usb_ctl_msg() */ mbox2_reboot: snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012, 1000); if (bootresponse == MBOX2_BOOT_LOADING) { snd_printdd("device not ready, resending boot sequence...\n"); goto mbox2_reboot; } if (bootresponse == MBOX2_BOOT_READY) { snd_printdd("device initialised!\n"); err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor)); config = dev->actconfig; if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err); err = usb_reset_configuration(dev); if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err); snd_printdd("mbox2_boot: new boot length = %d\n", le16_to_cpu(get_cfg_desc(config)->wTotalLength)); /* Successful boot, (should reset all altsettings to 0 like windows does, but works without it) * but now we will try sending capture/playback enable magic * * 80 bb 00 = 24bit mode - S24_3BE * 44 ac 00 = 16bit mode? * */ /* We want 48khz mode for now */ enablemagic[0]=0x80; enablemagic[1]=0xbb; enablemagic[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x01, 0x22, 0x0100, 0x0085, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &enablemagic, 0x0003, 1000); return 0; /* Succesful boot */ } snd_printdd("unknown bootresponse, ignoring device: %d\n",bootresponse); return -ENODEV; } snd_printk("Invalid firmware size: %d\n",fwsize); return -ENODEV; } ####### quirk: { USB_DEVICE(0x0dba, 0x3000), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .vendor_name = "Digidesign", .product_name = "Mbox 2", .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_COMPOSITE, .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 1, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 2, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 3, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 4, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 5, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 6, .type = QUIRK_MIDI_MBOX2, .data = & (const struct snd_usb_midi_endpoint_info) { .out_ep = 0x02, .out_cables = 0x0001, .in_ep = 0x81, .in_interval = 0x01, .in_cables = 0x0001 } }, { .ifnum = -1 } } } }, ##### midi case QUIRK_MIDI_MBOX2: /* Digidesign Mbox 2 uses MIDIMAN MIDI protocol */ umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops; /* * We have to make sure that the USB core looks * again at interface 6 by calling usb_set_interface() on it. */ usb_set_interface(umidi->chip->dev, 6, 0); memcpy(&endpoints[0], quirk->data, sizeof(struct snd_usb_midi_endpoint_info)); err = 0; break; Damien

4 26

Re: [alsa-devel] [PATCH 2.6.39-rc3] hda_intel: ALSA HD Audio patch for Intel Panther Point DeviceIDs
by Takashi Iwai 08 Oct '12

08 Oct '12

At Wed, 20 Apr 2011 10:59:57 -0700, Seth Heasley wrote: > > This patch adds the HD Audio Controller DeviceIDs for the Intel Panther Point PCH. > > Signed-off-by: Seth Heasley <seth.heasley(a)intel.com> Applied now. Thanks. Takashi > --- > --- linux-2.6.39-rc3/sound/pci/hda/hda_intel.c.orig 2011-04-11 17:21:51.000000000 -0700 > +++ linux-2.6.39-rc3/sound/pci/hda/hda_intel.c 2011-04-14 11:44:40.000000000 -0700 > @@ -126,6 +126,7 @@ > "{Intel, ICH10}," > "{Intel, PCH}," > "{Intel, CPT}," > + "{Intel, PPT}," > "{Intel, PBG}," > "{Intel, SCH}," > "{ATI, SB450}," > @@ -2759,6 +2760,8 @@ > { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH }, > /* PBG */ > { PCI_DEVICE(0x8086, 0x1d20), .driver_data = AZX_DRIVER_PCH }, > + /* Panther Point */ > + { PCI_DEVICE(0x8086, 0x1e20), .driver_data = AZX_DRIVER_PCH }, > /* SCH */ > { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH }, > /* Generic Intel */ >

3 2

[alsa-devel] [PATCH] snd-usb-us122l: Fix missing NULL checks
by Karsten Wiese 27 Apr '12

27 Apr '12

Fix missing NULL checks in usb_stream_hwdep_poll() and usb_stream_hwdep_ioctl(). Wake up poll waiters before returning from usb_stream_hwdep_ioctl(). Signed-off-by: Karsten Wiese <fzu(a)wemgehoertderstaat.de> Cc: stable(a)kernel.org --- sound/usb/usx2y/us122l.c | 41 ++++++++++++++++++++--------------------- 1 files changed, 20 insertions(+), 21 deletions(-) diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 91bb296..7abda8d 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -269,29 +269,26 @@ static unsigned int usb_stream_hwdep_poll(struct snd_hwdep *hw, struct file *file, poll_table *wait) { struct us122l *us122l = hw->private_data; - struct usb_stream *s = us122l->sk.s; unsigned *polled; unsigned int mask; poll_wait(file, &us122l->sk.sleep, wait); - switch (s->state) { - case usb_stream_ready: - if (us122l->first == file) - polled = &s->periods_polled; - else - polled = &us122l->second_periods_polled; - if (*polled != s->periods_done) { - *polled = s->periods_done; - mask = POLLIN | POLLOUT | POLLWRNORM; - break; + mask = POLLIN | POLLOUT | POLLWRNORM | POLLERR; + if (mutex_trylock(&us122l->mutex)) { + struct usb_stream *s = us122l->sk.s; + if (s && s->state == usb_stream_ready) { + if (us122l->first == file) + polled = &s->periods_polled; + else + polled = &us122l->second_periods_polled; + if (*polled != s->periods_done) { + *polled = s->periods_done; + mask = POLLIN | POLLOUT | POLLWRNORM; + } else + mask = 0; } - /* Fall through */ - mask = 0; - break; - default: - mask = POLLIN | POLLOUT | POLLWRNORM | POLLERR; - break; + mutex_unlock(&us122l->mutex); } return mask; } @@ -377,6 +374,7 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, { struct usb_stream_config *cfg; struct us122l *us122l = hw->private_data; + struct usb_stream *s; unsigned min_period_frames; int err = 0; bool high_speed; @@ -422,18 +420,18 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, snd_power_wait(hw->card, SNDRV_CTL_POWER_D0); mutex_lock(&us122l->mutex); + s = us122l->sk.s; if (!us122l->master) us122l->master = file; else if (us122l->master != file) { - if (memcmp(cfg, &us122l->sk.s->cfg, sizeof(*cfg))) { + if (!s || memcmp(cfg, &s->cfg, sizeof(*cfg))) { err = -EIO; goto unlock; } us122l->slave = file; } - if (!us122l->sk.s || - memcmp(cfg, &us122l->sk.s->cfg, sizeof(*cfg)) || - us122l->sk.s->state == usb_stream_xrun) { + if (!s || memcmp(cfg, &s->cfg, sizeof(*cfg)) || + s->state == usb_stream_xrun) { us122l_stop(us122l); if (!us122l_start(us122l, cfg->sample_rate, cfg->period_frames)) err = -EIO; @@ -444,6 +442,7 @@ unlock: mutex_unlock(&us122l->mutex); free: kfree(cfg); + wake_up_all(&us122l->sk.sleep); return err; } -- 1.7.2.3

2 5

[alsa-devel] [PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
by David Henningsson 01 Feb '12

01 Feb '12

Since I'm a little new in HDMI land and the patch is non-trivial, I wouldn't mind some comments on this one. Also thanks to Jaroslav who cleared a few things out about the logical and physical devices which helped me figure out what I should do about it :-) Anyway, here's the patch. Some newer chips have more than one HDMI output, but usually not all of them are exposed as physical jacks. Removing the unused PCM devices (as indicated by BIOS in the pin config default) will reduce user confusion as they currently have to choose between several HDMI devices, some of them not working anyway. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

4 14

[alsa-devel] [PATCH] ASoC: WM8903: Implement DMIC support
by Stephen Warren 14 Oct '11

14 Oct '11

In addition to the currently supported analog capture path, the WM8903 also supports digital mics. The analog and digital capture paths are exclusive; a mux is present to select the capture source. Logically, the mux exists to select the decimator's input, from either the ADC or DMIC block outputs. However, the ADC power domain also includes the DMIC interface. Consequently, this change represents the mux as existing immediately before the ADC, and selecting between the Input PGA and DMIC block outputs. An alternative might be to represent the mux in its correct location, and associate the ADC power enable controls with both the real ADC, and a fake ADC for the DMIC? Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- sound/soc/codecs/wm8903.c | 23 +++++++++++++++++++++-- 1 files changed, 21 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index d53f206..f3cab84 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -634,6 +634,13 @@ static const struct soc_enum lsidetone_enum = static const struct soc_enum rsidetone_enum = SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text); +static const char *adcinput_text[] = { + "ADC", "DMIC" +}; + +static const struct soc_enum adcinput_enum = + SOC_ENUM_SINGLE(WM8903_CLOCK_RATE_TEST_4, 9, 2, adcinput_text); + static const char *aif_text[] = { "Left", "Right" }; @@ -767,6 +774,9 @@ static const struct snd_kcontrol_new lsidetone_mux = static const struct snd_kcontrol_new rsidetone_mux = SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); +static const struct snd_kcontrol_new adcinput_mux = + SOC_DAPM_ENUM("ADC Input", adcinput_enum); + static const struct snd_kcontrol_new lcapture_mux = SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum); @@ -817,6 +827,7 @@ SND_SOC_DAPM_INPUT("IN2L"), SND_SOC_DAPM_INPUT("IN2R"), SND_SOC_DAPM_INPUT("IN3L"), SND_SOC_DAPM_INPUT("IN3R"), +SND_SOC_DAPM_INPUT("DMICDAT"), SND_SOC_DAPM_OUTPUT("HPOUTL"), SND_SOC_DAPM_OUTPUT("HPOUTR"), @@ -842,6 +853,9 @@ SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), +SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), +SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), + SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0), SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0), @@ -979,6 +993,11 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = { { "Left Input PGA", NULL, "Left Input Mode Mux" }, { "Right Input PGA", NULL, "Right Input Mode Mux" }, + { "Left ADC Input", "ADC", "Left Input PGA" }, + { "Left ADC Input", "DMIC", "DMICDAT" }, + { "Right ADC Input", "ADC", "Right Input PGA" }, + { "Right ADC Input", "DMIC", "DMICDAT" }, + { "Left Capture Mux", "Left", "ADCL" }, { "Left Capture Mux", "Right", "ADCR" }, @@ -988,9 +1007,9 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = { { "AIFTXL", NULL, "Left Capture Mux" }, { "AIFTXR", NULL, "Right Capture Mux" }, - { "ADCL", NULL, "Left Input PGA" }, + { "ADCL", NULL, "Left ADC Input" }, { "ADCL", NULL, "CLK_DSP" }, - { "ADCR", NULL, "Right Input PGA" }, + { "ADCR", NULL, "Right ADC Input" }, { "ADCR", NULL, "CLK_DSP" }, { "Left Playback Mux", "Left", "AIFRXL" }, -- 1.7.1

4 4

[alsa-devel] [ASoc] TDM over one SSC channel on AT91 possible?
by Friedrich Lobenstock 24 Jun '11

24 Jun '11

Hello! The background: I'm just designing an ATMEL AT91RM9200 based board which got two TLV320AIC33 on board. It is either possible to hook up the two TLV320AIC33 to a separate SSC (synchronous serial control) channel each or use one SSC channel and configure it for TDM (time division multiplex) mode. There is already a driver for TLV320AIC14k/TLV320AIC2k in the development tree, so adding support for the TLV320AIC33 should be feasible. What I'm not sure about is the fact if ASOC is prepared for using channels, especially SSC, in TDM mode. Is the core ASOC structure prepared to handle that? Would we be better off instantiate one drive twice each time with different parameters for the SSC channel? Thanks for any feedback. -- MfG / Regards Friedrich Lobenstock _________________________________________________________ SCOTTY Group Austria GmbH a SCOTTY Group plc company, http://www.scottygroup.com/ _________________________________________________________

4 3