May 2020 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] [PATCH 0/6] ASoC: mediatek: mt8183: support DP audio
by Tzung-Bi Shih 24 Nov '22

24 Nov '22

(This series depends on https://lore.kernel.org/patchwork/patch/1126819/ which has not applied to the maintainer's tree yet.) This series makes mt8183-mt6358-ts3a227-max98357 support DP (display port) audio output. ASoC: hdmi-codec: add PCM trigger operator - add a PCM trigger callback if codec driver is interested in PCM events. drm: bridge: it6505: bridge to hdmi-codec - add audio feature support of it6505. - bridge to hdmi-codec so that ASoC can use the audio feature. - defer the "enabling" after receiving PCM START or RESUME event. ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec - bind to hdmi-codec in mt8183-mt6358-ts3a227-max98357. drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting - use the mechanism from the following patch https://mailman.alsa-project.org/pipermail/alsa-devel/2019-September/155302… to report jack status (from DRM to ASoC). Allen Chen (1): drm: bridge: it6505: bridge to hdmi-codec Tzung-Bi Shih (5): ASoC: hdmi-codec: add PCM trigger operator ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting .../sound/mt8183-mt6358-ts3a227-max98357.txt | 2 + drivers/gpu/drm/bridge/ite-it6505.c | 191 +++++++++++++++++- include/sound/hdmi-codec.h | 13 ++ sound/soc/codecs/hdmi-codec.c | 31 +++ sound/soc/mediatek/Kconfig | 3 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 36 +++- 6 files changed, 266 insertions(+), 10 deletions(-) -- 2.23.0.866.gb869b98d4c-goog

3 9

[alsa-devel] [PATCH 00/46] ARM: pxa: towards multiplatform support
by Arnd Bergmann 19 Apr '22

19 Apr '22

Hi PXA maintainers, I'm in the process of getting the old ARM platforms to all build in a single kernel. The largest part of that work is changing all the device drivers to no longer require mach/*.h header files. This series does it for arch/pxa/. As with the omap1 and s3c24xx series I sent before, I don't expect this all to be correct in the first version, though a lot of the patches are fairly simple and I did exhaustive compile-time testing on them. Please test if you have the hardware, or review! Arnd Bcc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Bcc: alsa-devel(a)alsa-project.org Bcc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Bcc: Brian Norris <computersforpeace(a)gmail.com> Bcc: Daniel Thompson <daniel.thompson(a)linaro.org> Bcc: David Woodhouse <dwmw2(a)infradead.org> Bcc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Bcc: Dominik Brodowski <linux(a)dominikbrodowski.net> Bcc: dri-devel(a)lists.freedesktop.org Bcc: Felipe Balbi <balbi(a)kernel.org> Bcc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Bcc: Guenter Roeck <linux(a)roeck-us.net> Bcc: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Bcc: Jens Axboe <axboe(a)kernel.dk> Bcc: Jingoo Han <jingoohan1(a)gmail.com> Bcc: Jonathan Cameron <jic23(a)cam.ac.uk> Bcc: Lee Jones <lee.jones(a)linaro.org> Bcc: Lubomir Rintel <lkundrak(a)v3.sk> Bcc: Marek Vasut <marek.vasut(a)gmail.com> Bcc: Mark Brown <broonie(a)kernel.org> Bcc: Michael Turquette <mturquette(a)baylibre.com> Bcc: Miquel Raynal <miquel.raynal(a)bootlin.com> Bcc: Paul Parsons <lost.distance(a)yahoo.com> Bcc: Pavel Machek <pavel(a)ucw.cz> Bcc: Philipp Zabel <philipp.zabel(a)gmail.com> Bcc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net> Bcc: Richard Weinberger <richard(a)nod.at> Bcc: Russell King <linux(a)armlinux.org.uk> Bcc: Sebastian Reichel <sre(a)kernel.org> Bcc: Sergey Lapin <slapin(a)ossfans.org> Bcc: Stephen Boyd <sboyd(a)kernel.org> Bcc: Tomas Cech <sleep_walker(a)suse.com> Bcc: Ulf Hansson <ulf.hansson(a)linaro.org> Bcc: Vignesh Raghavendra <vigneshr(a)ti.com> Bcc: Viresh Kumar <viresh.kumar(a)linaro.org> Bcc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: linux-clk(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-watchdog(a)vger.kernel.org Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: cmx270: use platform device for nand ARM: pxa: make addr-map.h header local ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers SoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver video: backlight: tosa: use gpio lookup table power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: move it8152 PCI support into machine ARM: pxa: remove unused mach/bitfield.h ARM: pxa: pci-it8152: add platform checks ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/common/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 8 +- arch/arm/mach-pxa/Makefile | 22 +- .../mach-pxa/{include/mach => }/addr-map.h | 0 .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 2 +- arch/arm/mach-pxa/cm-x270.c | 25 +++ arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +- arch/arm/mach-pxa/cm-x2xx.c | 7 +- arch/arm/mach-pxa/cm-x300.c | 12 +- .../arm/mach-pxa/cm_x255-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x270-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x2xx-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 3 +- arch/arm/mach-pxa/csb726.c | 3 +- arch/arm/mach-pxa/devices.c | 15 +- .../arm/mach-pxa/e740-pcmcia.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/eseries.c | 34 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 78 ++++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 2 +- arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/include/mach/regs-ost.h | 4 +- arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/include/mach/tosa.h | 15 -- arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 4 +- arch/arm/mach-pxa/lubbock.c | 15 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - arch/arm/mach-pxa/magician.c | 54 ++++- arch/arm/mach-pxa/mainstone.c | 15 +- .../mach-pxa/{include/mach => }/mainstone.h | 2 - arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.c | 11 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- .../it8152.c => mach-pxa/pci-it8152.c} | 25 ++- .../it8152.h => mach-pxa/pci-it8152.h} | 2 - arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 4 +- arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 6 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 11 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-pxa/sleep.S | 5 +- arch/arm/mach-pxa/smemc.c | 11 +- arch/arm/mach-pxa/spitz.c | 33 ++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 1 - .../arm/mach-pxa/stargate2-pcmcia.c | 2 +- arch/arm/mach-pxa/tosa.c | 63 +++++- .../arm/mach-pxa/trizeps4-pcmcia.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 4 +- .../mach-pxa/{include/mach => }/trizeps4.h | 3 +- .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 11 + arch/arm/mach-pxa/zeus.c | 6 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 123 ++++++------ drivers/input/touchscreen/zylonite-wm97xx.c | 34 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 89 +++------ drivers/pcmcia/Makefile | 16 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/backlight/tosa_bl.c | 10 +- drivers/video/backlight/tosa_bl.h | 8 + drivers/video/backlight/tosa_lcd.c | 28 ++- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 42 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 205 files changed, 1916 insertions(+), 1795 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (99%) rename drivers/pcmcia/pxa2xx_cm_x255.c => arch/arm/mach-pxa/cm_x255-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x270.c => arch/arm/mach-pxa/cm_x270-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x2xx.c => arch/arm/mach-pxa/cm_x2xx-pcmcia.c (96%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (99%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (99%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (98%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (98%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (98%) rename arch/arm/{common/it8152.c => mach-pxa/pci-it8152.c} (95%) rename arch/arm/{include/asm/hardware/it8152.h => mach-pxa/pci-it8152.h} (98%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (97%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (99%) rename drivers/pcmcia/pxa2xx_stargate2.c => arch/arm/mach-pxa/stargate2-pcmcia.c (99%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (98%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) create mode 100644 drivers/video/backlight/tosa_bl.h rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.20.0

9 53

[alsa-devel] [PATCH v7 0/8] Fix year 2038 issue for sound subsystem
by Arnd Bergmann 19 Oct '21

19 Oct '21

This is a series I worked on with Baolin in 2017 and 2018, but we never quite managed to finish up the last pieces. During the ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was made to go with this approach for keeping best compatibility with existing source code, and then I failed to follow up by resending the patches. Now I have patches for all remaining time_t uses in the kernel, so it's absolutely time to revisit them. I have done more review of the patches myself and found a couple of minor issues that I have fixed up, otherwise the series is still the same as before. Conceptually, the idea of these patches is: - 64-bit applications should see no changes at all, neither compile-time nor run-time. - 32-bit code compiled with a 64-bit time_t currently does not work with ALSA, and requires kernel changes and/or sound/asound.h changes - Most 32-bit code using these interfaces will work correctly on a modified kernel, with or without the uapi header changes. - 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the updated header file for 64-bit time_t support - 32-bit i386 user space with 64-bit time_t is broken for SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also addressed by the updated uapi header. - PCM mmap is currently supported on native x86 kernels (both 32-bit and 64-bit) but not for compat mode. This series breaks the 32-bit native mmap support for 32-bit time_t, but instead allows it for 64-bit time_t on both native and compat kernels. This seems to be the best trade-off, as mmap support is optional already, and most 32-bit code runs in compat mode anyway. - I've tried to avoid breaking compilation of 32-bit code as much as possible. Anything that does break however is likely code that is already broken on 64-bit time_t and needs source changes to fix them. I hope I addressed all review comments by now, so please pull this for linux-5.6. A git branch with the same contents is available for testing at [1]. Arnd [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v7 [2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHv… Changes since v6: (Arnd): - Add a patch to update the API versions - Hide a timespec reference in #ifndef __KERNEL__ to remove the last reference to time_t - Use a more readable way to do padding and describe it in the changelog - Rebase to linux-5.5-rc1, changing include/sound/soc-component.h and sound/drivers/aloop.c as needed. Changes since v5 (Arnd): - Rebased to linux-5.4-rc4 - Updated to completely remove timespec and time_t references from alsa - found and fixed a few bugs Changes since v4 (Baolin): - Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime. - Add patch 8 to change internal timespec. - Add more explanation in commit message. - Use ktime_get_real_ts64() in patch 6. - Split common code out into a separate function in patch 6. - Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro. Changes since v3: - Move struct snd_pcm_status32 to pcm.h file. - Modify comments and commit message. - Add new patch2 ~ patch6. Changes since v2: - Renamed all structures to make clear. - Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32. Changes since v1: - Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel. - Convert pcm_compat.c to use struct snd_pcm_status_64. - Convert pcm_native.c to use struct snd_pcm_status_64. --- Arnd Bergmann (3): ALSA: move snd_pcm_ioctl_sync_ptr_compat into pcm_native.c ALSA: add new 32-bit layout for snd_pcm_mmap_status/control ALSA: bump uapi version numbers Baolin Wang (6): ALSA: Replace timespec with timespec64 ALSA: Avoid using timespec for struct snd_timer_status ALSA: Avoid using timespec for struct snd_ctl_elem_value ALSA: Avoid using timespec for struct snd_pcm_status ALSA: Avoid using timespec for struct snd_rawmidi_status ALSA: Avoid using timespec for struct snd_timer_tread include/sound/pcm.h | 74 ++++++-- include/sound/soc-component.h | 4 +- include/sound/timer.h | 4 +- include/uapi/sound/asound.h | 145 +++++++++++++-- sound/core/pcm.c | 12 +- sound/core/pcm_compat.c | 282 ++++++++---------------------- sound/core/pcm_lib.c | 38 ++-- sound/core/pcm_native.c | 226 +++++++++++++++++++++--- sound/core/rawmidi.c | 132 +++++++++++--- sound/core/rawmidi_compat.c | 87 +++------ sound/core/timer.c | 229 ++++++++++++++++++------ sound/core/timer_compat.c | 62 +------ sound/drivers/aloop.c | 2 +- sound/pci/hda/hda_controller.c | 10 +- sound/soc/intel/skylake/skl-pcm.c | 4 +- 15 files changed, 817 insertions(+), 494 deletions(-) -- 2.20.0

5 25

[PATCH] ASoC: fsl: imx-pcm-dma: Don't request dma channel in probe
by Shengjiu Wang 22 Apr '21

22 Apr '21

There are two requirements that we need to move the request of dma channel from probe to open. - When dma device binds with power-domains, the power will be enabled when we request dma channel. If the request of dma channel happen on probe, then the power-domains will be always enabled after kernel boot up, which is not good for power saving, so we need to move the request of dma channel to .open(); - With FE-BE case, if the dma channel is requested in probe, then there will be below issue, which is caused by that the dma channel will be requested duplicately [ 638.906268] sysfs: cannot create duplicate filename '/devices/soc0/soc/2000000.bus/2000000.spba-bus/2024000.esai/dma:tx' [ 638.919061] CPU: 1 PID: 673 Comm: aplay Not tainted 5.7.0-rc1-12956-gfc64b2585593 #287 [ 638.927113] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 638.933690] [<c0110dd8>] (unwind_backtrace) from [<c010b8ec>] (show_stack+0x10/0x14) [ 638.941464] [<c010b8ec>] (show_stack) from [<c0557fc0>] (dump_stack+0xe4/0x118) [ 638.948808] [<c0557fc0>] (dump_stack) from [<c032aeb4>] (sysfs_warn_dup+0x50/0x64) [ 638.956406] [<c032aeb4>] (sysfs_warn_dup) from [<c032b1a8>] (sysfs_do_create_link_sd+0xc8/0xd4) [ 638.965134] [<c032b1a8>] (sysfs_do_create_link_sd) from [<c05dc668>] (dma_request_chan+0xb0/0x210) [ 638.974120] [<c05dc668>] (dma_request_chan) from [<c05dc7d0>] (dma_request_slave_channel+0x8/0x14) [ 638.983111] [<c05dc7d0>] (dma_request_slave_channel) from [<c09d5548>] (fsl_asrc_dma_hw_params+0x1e0/0x438) [ 638.992881] [<c09d5548>] (fsl_asrc_dma_hw_params) from [<c09c1654>] (soc_pcm_hw_params+0x4a0/0x6a8) [ 639.001952] [<c09c1654>] (soc_pcm_hw_params) from [<c09c39d4>] (dpcm_fe_dai_hw_params+0x70/0xe4) [ 639.010765] [<c09c39d4>] (dpcm_fe_dai_hw_params) from [<c099b274>] (snd_pcm_hw_params+0x158/0x418) [ 639.019750] [<c099b274>] (snd_pcm_hw_params) from [<c099c5a0>] (snd_pcm_ioctl+0x734/0x183c) [ 639.028129] [<c099c5a0>] (snd_pcm_ioctl) from [<c029ff94>] (ksys_ioctl+0x2ac/0xb98) [ 639.035812] [<c029ff94>] (ksys_ioctl) from [<c0100080>] (ret_fast_syscall+0x0/0x28) [ 639.043490] Exception stack(0xec529fa8 to 0xec529ff0) [ 639.048565] 9fa0: bee84650 01321870 00000004 c25c4111 bee84650 0002000f [ 639.056766] 9fc0: bee84650 01321870 01321820 00000036 00001f40 00000000 0002c2f8 00000003 [ 639.064964] 9fe0: b6f483fc bee8451c b6ee2655 b6e1dcf8 [ 639.070339] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/imx-pcm-dma.c | 173 +++++++++++++++++++++++++++++++++--- 1 file changed, 159 insertions(+), 14 deletions(-) diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 04a9bc749016..dae53b384df4 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -11,6 +11,7 @@ #include <linux/dmaengine.h> #include <linux/types.h> #include <linux/module.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/pcm.h> @@ -29,24 +30,168 @@ static bool filter(struct dma_chan *chan, void *param) return true; } -static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = { - .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, - .compat_filter_fn = filter, -}; +static int imx_pcm_hw_params(struct snd_soc_component *component, + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_dmaengine_dai_dma_data *dma_data; + struct dma_slave_config config; + struct dma_chan *chan; + int ret = 0; -int imx_pcm_dma_init(struct platform_device *pdev, size_t size) + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + chan = snd_dmaengine_pcm_get_chan(substream); + if (!chan) + return -EINVAL; + + ret = snd_hwparams_to_dma_slave_config(substream, params, &config); + if (ret) + return ret; + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + if (!dma_data) + return -EINVAL; + + snd_dmaengine_pcm_set_config_from_dai_data(substream, + dma_data, + &config); + return dmaengine_slave_config(chan, &config); +} + +static int imx_pcm_hw_free(struct snd_soc_component *component, + struct snd_pcm_substream *substream) { - struct snd_dmaengine_pcm_config *config; + snd_pcm_set_runtime_buffer(substream, NULL); + return 0; +} + +static snd_pcm_uframes_t imx_pcm_pointer(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + return snd_dmaengine_pcm_pointer(substream); +} + +static int imx_pcm_trigger(struct snd_soc_component *component, + struct snd_pcm_substream *substream, int cmd) +{ + return snd_dmaengine_pcm_trigger(substream, cmd); +} + +static int imx_pcm_open(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_dmaengine_dai_dma_data *dma_data; + struct device *dev = component->dev; + struct snd_pcm_hardware hw; + struct dma_chan *chan; + int ret; + + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) { + dev_err(dev, "failed to set pcm hw params periods\n"); + return ret; + } + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + if (!dma_data) + return -EINVAL; + + chan = dma_request_slave_channel(cpu_dai->dev, tx ? "tx" : "rx"); + if (!chan) { + /* Try to request channel using compat_filter_fn */ + chan = snd_dmaengine_pcm_request_channel(filter, + dma_data->filter_data); + if (!chan) + return -ENXIO; + } - config = devm_kzalloc(&pdev->dev, - sizeof(struct snd_dmaengine_pcm_config), GFP_KERNEL); - if (!config) - return -ENOMEM; - *config = imx_dmaengine_pcm_config; + ret = snd_dmaengine_pcm_open(substream, chan); + if (ret) + goto pcm_open_fail; - return devm_snd_dmaengine_pcm_register(&pdev->dev, - config, - SND_DMAENGINE_PCM_FLAG_COMPAT); + memset(&hw, 0, sizeof(hw)); + hw.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED; + hw.periods_min = 2; + hw.periods_max = UINT_MAX; + hw.period_bytes_min = 256; + hw.period_bytes_max = dma_get_max_seg_size(chan->device->dev); + hw.buffer_bytes_max = IMX_DEFAULT_DMABUF_SIZE; + hw.fifo_size = dma_data->fifo_size; + + /* Refine the hw according to caps of DMA. */ + ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream, + dma_data, + &hw, + chan); + if (ret < 0) + goto refine_runtime_hwparams_fail; + + snd_soc_set_runtime_hwparams(substream, &hw); + + /* Support allocate memory from IRAM */ + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_IRAM, + chan->device->dev, + hw.buffer_bytes_max, + &substream->dma_buffer); + if (ret < 0) + goto alloc_pagas_fail; + + return 0; + +alloc_pagas_fail: +refine_runtime_hwparams_fail: + snd_dmaengine_pcm_close(substream); +pcm_open_fail: + dma_release_channel(chan); + + return ret; +} + +static int imx_pcm_close(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + if (substream) { + snd_dma_free_pages(&substream->dma_buffer); + substream->dma_buffer.area = NULL; + substream->dma_buffer.addr = 0; + } + + return snd_dmaengine_pcm_close_release_chan(substream); +} + +static int imx_pcm_new(struct snd_soc_component *component, + struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + + return dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); +} + +static const struct snd_soc_component_driver imx_pcm_component = { + .name = "imx-pcm-dma", + .pcm_construct = imx_pcm_new, + .open = imx_pcm_open, + .close = imx_pcm_close, + .hw_params = imx_pcm_hw_params, + .hw_free = imx_pcm_hw_free, + .trigger = imx_pcm_trigger, + .pointer = imx_pcm_pointer, +}; + +int imx_pcm_dma_init(struct platform_device *pdev, size_t size) +{ + return devm_snd_soc_register_component(&pdev->dev, + &imx_pcm_component, NULL, 0); } EXPORT_SYMBOL_GPL(imx_pcm_dma_init); -- 2.21.0

5 17

ASoc: soc_core.c stream direction from snd_soc_dai
by Matt Flax 26 Feb '21

26 Feb '21

Hi there, A large number of audio codecs allow different formats for playback and capture. This becomes very useful when there are different latencies between playback and capture hardware data lines. For example digital isolation chips typically have a 1 bit delay in propagation as the bit clock rate gets faster for higher sample rates. By setting the capture and playback formats to differ by one or two bit clock cycles, the delay problem is solved. There doesn't seem to be a simple way to detect stream direction in the codec driver's set_fmt function. The snd_soc_runtime_set_dai_fmt function : https://github.com/torvalds/linux/blob/master/sound/soc/soc-core.c#L1480 calls the snd_soc_dai_set_fmt function : https://github.com/torvalds/linux/blob/master/sound/soc/soc-dai.c#L101 which calls the set_fmt function : https://github.com/torvalds/linux/blob/master/include/sound/soc-dai.h#L189 The snd_soc_dai_ops set_fmt function is defined as : int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt); Is there a simple way to find the stream direction from a snd_soc_dai ? If the stream direction can be detected then the playback and capture formats can be set independently for the codec. It there a different way to set the playback and capture formats for the codec independently at runtime, depending on the sample rate ? Matt

5 8

Re: [alsa-devel] [PATCH] ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers
by Takashi Iwai 16 Oct '20

16 Oct '20

On Fri, 11 Oct 2019 19:19:36 +0200, Szabolcs Szőke wrote: > > BOSS Katana amplifiers cannot be used for recording or playback if quirks > are applied > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223 > Signed-off-by: Szabolcs Szőke <szszoke.code(a)gmail.com> Applied now. Thanks. Takashi > > --- > sound/usb/pcm.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c > index 33cd26763c0e..daadb0c66eee 100644 > --- a/sound/usb/pcm.c > +++ b/sound/usb/pcm.c > @@ -348,6 +348,9 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, > ep = 0x84; > ifnum = 0; > goto add_sync_ep_from_ifnum; > + case USB_ID(0x0582, 0x01d8): /* BOSS Katana */ > + /* BOSS Katana amplifiers do not need quirks */ > + return 0; > } > > if (attr == USB_ENDPOINT_SYNC_ASYNC && > -- > 2.20.1 >

5 20

[alsa-devel] [PATCH] ALSA: usb-audio: fix spelling mistake "Frequence" -> "Frequency"
by Colin King 02 Oct '20

02 Oct '20

From: Colin Ian King <colin.king(a)canonical.com> There are spelling mistakes in equalizer name fields, fix them. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/usb/mixer_us16x08.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index 26ed23b18b77..4f594f9552a8 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -1119,7 +1119,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQLOWFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ Low Frequence", + .name = "EQ Low Frequency", }, { /* EQ mid low gain */ .kcontrol_new = &snd_us16x08_eq_gain_ctl, @@ -1133,7 +1133,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQLOWMIDFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ MidLow Frequence", + .name = "EQ MidLow Frequency", }, { /* EQ mid low Q */ .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, @@ -1154,7 +1154,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQHIGHMIDFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ MidHigh Frequence", + .name = "EQ MidHigh Frequency", }, { /* EQ mid high Q */ .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, @@ -1175,7 +1175,7 @@ static const struct snd_us16x08_control_params eq_controls[] = { .control_id = SND_US16X08_ID_EQHIGHFREQ, .type = USB_MIXER_U8, .num_channels = 16, - .name = "EQ High Frequence", + .name = "EQ High Frequency", }, }; -- 2.19.1

3 3

[PATCH V2] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine
by Radoslaw Biernacki 08 Sep '20

08 Sep '20

This single fix address two issues on machines with nau88125: 1) Audio distortion, due to lack of required clock rate on MCLK line 2) Loud audible "pops" on headphones if there is no sysclk during nau8825 playback power up sequence Explanation for: 1) Due to Skylake HW limitation, MCLK pin can only output 24MHz clk rate (it can be only connected to XTAL parent clk). The BCLK pin can be driven by dividers and therefore FW is able to set it to rate required by chosen audio format. According to nau8825 datasheet, 256*FS sysclk gives the best audio quality and the only way to achieve this (taking into account the above limitations) its to regenerate the MCLK from BCLK on nau8825 side by FFL. Without required clk rate, audio is distorted by added harmonics. 2) Currently Skylake does not output MCLK/FS when the back-end DAI op hw_param is called, so we cannot switch to MCLK/FS in hw_param. This patch reduces pop by letting nau8825 keep using its internal VCO clock during widget power up sequence, until SNDRV_PCM_TRIGGER_START when MCLK/FS is available. Once device resumes, the system will only enable power sequence for playback without doing hardware parameter, audio format, and PLL configure. In the mean time, the jack detecion sequence has changed PLL parameters and switched to internal clock. Thus, the playback signal distorted without correct PLL parameters. That is why we need to configure the PLL again in SNDRV_PCM_TRIGGER_RESUME case. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> Signed-off-by: Ben Zhang <benzh(a)chromium.org> Signed-off-by: Radoslaw Biernacki <rad(a)semihalf.com> --- .../soc/intel/boards/skl_nau88l25_max98357a.c | 72 +++++++++++++----- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 73 ++++++++++++++----- 2 files changed, 107 insertions(+), 38 deletions(-) diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index d7b8154c43a4..0f3cea1342d1 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -47,7 +48,7 @@ enum { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; @@ -60,14 +61,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -292,24 +286,40 @@ static const struct snd_soc_ops skylake_nau8825_fe_ops = { .startup = skl_fe_startup, }; -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); + int ret = 0; - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + case SNDRV_PCM_TRIGGER_RESUME: + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + msleep(20); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, @@ -630,10 +640,34 @@ static int skylake_card_late_probe(struct snd_soc_card *card) return hdac_hdmi_jack_port_init(component, &card->dapm); } +static int __maybe_unused skylake_nau8825_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai; + + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found\n"); + return -EIO; + } + + dev_dbg(codec_dai->dev, "playback_active:%d playback_widget->active:%d codec_dai->rate:%d\n", + codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK], + codec_dai->playback_widget->active, + codec_dai->rate); + + if (codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK] && + codec_dai->playback_widget->active) + snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + + return 0; +} + /* skylake audio machine driver for SPT + NAU88L25 */ static struct snd_soc_card skylake_audio_card = { .name = "sklnau8825max", .owner = THIS_MODULE, + .resume_post = skylake_nau8825_resume_post, .dai_link = skylake_dais, .num_links = ARRAY_SIZE(skylake_dais), .controls = skylake_controls, diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 4b317bcf6ea0..be44a40067f0 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -57,7 +58,7 @@ static const struct snd_kcontrol_new skylake_controls[] = { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; @@ -70,14 +71,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -85,6 +79,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } } + return ret; } @@ -344,24 +339,40 @@ static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); + int ret = 0; - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + case SNDRV_PCM_TRIGGER_RESUME: + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + msleep(20); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static const unsigned int channels_dmic[] = { @@ -671,10 +682,34 @@ static int skylake_card_late_probe(struct snd_soc_card *card) return hdac_hdmi_jack_port_init(component, &card->dapm); } +static int __maybe_unused skylake_nau8825_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai; + + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found\n"); + return -EIO; + } + + dev_dbg(codec_dai->dev, "playback_active:%d playback_widget->active:%d codec_dai->rate:%d\n", + codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK], + codec_dai->playback_widget->active, + codec_dai->rate); + + if (codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK] && + codec_dai->playback_widget->active) + snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + + return 0; +} + /* skylake audio machine driver for SPT + NAU88L25 */ static struct snd_soc_card skylake_audio_card = { .name = "sklnau8825adi", .owner = THIS_MODULE, + .resume_post = skylake_nau8825_resume_post, .dai_link = skylake_dais, .num_links = ARRAY_SIZE(skylake_dais), .controls = skylake_controls, -- 2.17.1

5 8