Alsa-devel November 2015

alsa-devel@alsa-project.org

127 participants
304 discussions

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] ASoC Sound Driver I2S over LPE, Intel Baytrail SoC. MinnowBoard Max
by Michael Pogrebinsky 02 Oct '17

02 Oct '17

Hi all, I have the MinnowBoard Max with Baytrail Atom (ValleyView) SoC. I'm attempting to write an Alsa (ASoC) driver for my sound card to work with this board. PCM should work through I2S for this sound card I have. >From my understanding Baytrail's I2S goes over LPE. I read this thread:https://www.mail-archive.com/elinux-minnowboard@lists.elinux.org/msg… So I understand that I need the 3 components for my ASoC driver. However I am having trouble at understanding how to communicate with the LPE to get the I2S working. Here is what I have done so far: I am running Ubuntu 14.04 LTS, kernel : 4.3.0-040300rc4 First of all I downloaded the firmware fw_sst_0f28.bin-48kHz_i2s_master fromhttps://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux… And put it /lib/firmware/intel/. Later I went to the Bios and enabled LPE in PCI mode. I do see the LPE controller now, but it shows as UNCLAIMED. Later I looked at the sound/soc/inte/baytrail/ and from my understanding in order for me to get the I2S working I need to load this module so I did modprobe snd-soc-sst-baytrail-pcm. Later I wrote a simple codec and machine driver (looking at the example of sound/soc/intel/boards/byt_max98090) however everytime I attempt to register the sound card with snd_soc_register_card, I get the following error message in dmesg : "ASoC: CPU DAI baytrail-pcm-audio not registered". >From this I deduct that although I loaded the snd-soc-sst-baytrail-pcm module, the driver has not actually been loaded. I'm clueless on how to proceed from here. I would highly appreciate your help.

3 7

[alsa-devel] [PATCH v2 1/2] ASoC: wm8960: Let wm8960 codec driver manage its own MCLK
by Zidan Wang 04 Apr '17

04 Apr '17

From: Zidan Wang <b50113(a)freescale.com> When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113(a)freescale.com> --- sound/soc/codecs/wm8960.c | 51 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 75cd7de..fd25973 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { + struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); @@ -618,14 +620,38 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - /* Set VMID to 2x50k */ - snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_STANDBY: + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + break; + + default: + break; + } + break; case SND_SOC_BIAS_STANDBY: @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int reg; + int reg, ret; switch (level) { case SND_SOC_BIAS_ON: @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); + + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } break; case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; + wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); + if (IS_ERR(wm8960->mclk)) { + if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); -- 1.9.1

5 10

[alsa-devel] Intel HDA audio on EEE PC 1101HGo
by Enrico Mioso 20 Jan '17

20 Jan '17

Hello guys. I am writing to you all to talk you about a strange behaviour of the Intel HDA Audio device on an EEE PC 1101H. The audio device at some point simply doesn't react to commands, giving in dmesgo utput like this: [22321.638079] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x00170503 [22322.641410] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00170503 This may happen when I boot the system up fresh (here there is no Windows and no hibernation), or when the controller goes to power-save. If I don't set a power save timeout, then the controller will not be recoverable if it gets stuck at boot. As a workaround, I set a very short timeout, so that when the controller fails to start audio, waiting some time and retrying will work. Preliminary infos: Card: HDA Intel MID Chip: Realtek ALC269; Thank you in advance for your help. Please keep me in CC - since I am not subscribed to any list. Enrico Here follows a lspci 00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH Poulsbo) (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f3f80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at c880 [size=8] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M] Region 3: Memory at f3f40000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Vendor Specific Information: Len=07 <?> Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel modules: gma500_gfx 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f3f38000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f0000000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 80000000-801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-fbefffff Prefetchable memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at b880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 (rev 07) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f3f37c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: lpc_sch Kernel modules: lpc_sch 00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller (rev 07) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: pata_sch Kernel modules: pata_sch, pata_acpi, ata_generic 01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0pcilib: sysfs_read_vpd: read failed: Connection timed out 000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0) Subsystem: ASUSTeK Computer Inc. Device 14e5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e880 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4122 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-25-f6-3a-90-e6-ba-ff Kernel driver in use: atl1c Kernel modules: atl1c

3 32

Re: [alsa-devel] Intel Cherry Trail platform sound issue
by Zhihe Tu 05 Nov '16

05 Nov '16

Can anyone give some suggestions? Thanks Tu 发件人: 涂治河 [mailto:tuzhihe@pcasl.com] 发送时间: 2015年11月5日 19:37 收件人: 'alsa-devel(a)alsa-project.org' 主题: Intel Cherry Trail platform sound issue Hi All, I get cherry trail tablet, and install ubuntu14.04.3, Kernel verison is 3.19. The table using rt5672 codec with no sound output in ubuntu, but it works in win8. I get intel sst firmware fw_sst_22a8.bin from https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tr… The driver load the firmware successfully and I change some alsa mixer items: amixer -c0 sset 'codec_out0 mix 0 pcm0_in' on amixer -c0 sset 'media0_out mix 0 media1_in' on amixer -c0 sset 'media1_in Gain 0' 80% amixer -c0 sset 'media1_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'media1_in Gain 0' off amixer -c0 sset 'pcm0_in Gain 0' 80% amixer -c0 sset 'pcm0_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'pcm0_in Gain 0' off amixer -c0 sset 'codec_out0 Gain 0' 80% amixer -c0 sset 'codec_out0 Gain 0 Ramp Delay' 50 amixer -c0 sset 'codec_out0 Gain 0' off But there are some errors with dmesg: [ 16.359646] Audio Port: ASoC: no backend DAIs enabled for Audio Port … [ 16.382156] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp2-port [ 16.383984] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port [ 16.541809] intel_sst_acpi 808622A8:00: Alloc for str 1 pipe 0x90 [ 17.545512] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x2 [ 17.555207] intel_sst_acpi 808622A8:00: fw returned err -16 [ 18.605859] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 18.615908] intel_sst_acpi 808622A8:00: fw returned err -16 [ 19.621943] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 19.631499] intel_sst_acpi 808622A8:00: fw returned err -16 [ 20.637527] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 20.647083] intel_sst_acpi 808622A8:00: fw returned err -16 [ 20.682979] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp2-port [ 21.681280] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 21.690836] intel_sst_acpi 808622A8:00: fw returned err -16 [ 21.697087] intel_sst_acpi 808622A8:00: free stream returned err -19 [ 22.757082] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 22.766640] intel_sst_acpi 808622A8:00: fw returned err -16 [ 23.772867] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 23.782432] intel_sst_acpi 808622A8:00: fw returned err -16 [ 23.857938] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port [ 23.989254] intel_sst_acpi 808622A8:00: Alloc for str 1 pipe 0x90 [ 23.989491] intel_sst_acpi 808622A8:00: FW sent error response 0x40034 [ 23.996864] intel_sst_acpi 808622A8:00: FW alloc failed ret -4 [ 24.003399] intel_sst_acpi 808622A8:00: sst_get_stream returned err -5 [ 24.010737] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 24.018652] Audio Port: ASoC: prepare FE Audio Port failed [ 25.024622] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 25.034180] intel_sst_acpi 808622A8:00: fw returned err -16 [ 26.040399] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 26.049955] intel_sst_acpi 808622A8:00: fw returned err -16 [ 27.056333] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 27.065890] intel_sst_acpi 808622A8:00: fw returned err -16 [ 28.072032] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 28.081591] intel_sst_acpi 808622A8:00: fw returned err -16 [ 28.117427] Audio Port: sst: error code = -22 [ 28.122401] snd_pcm_update_hw_ptr0: 120 callbacks suppressed [ 28.122409] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.132784] Audio Port: sst: error code = -22 [ 28.137749] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.372967] Audio Port: sst: error code = -22 [ 28.377946] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.388317] Audio Port: sst: error code = -22 [ 28.393289] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.403687] Audio Port: sst: error code = -22 lsmod info: snd_soc_sst_cht_bsw_rt5672 16384 0 snd_intel_sst_acpi 16384 1 snd_intel_sst_core 73728 1 snd_intel_sst_acpi snd_soc_sst_mfld_platform 77824 3 snd_intel_sst_core snd_soc_rt5670 106496 1 snd_soc_rl6231 16384 1 snd_soc_rt5670 snd_soc_core 196608 4 snd_soc_rt5670,snd_soc_sst_cht_bsw_rt5672,snd_soc_sst_mfld_platform snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_compress 20480 1 snd_soc_core snd_pcm_dmaengine 16384 1 snd_soc_core snd_rawmidi 32768 1 snd_seq_midi snd_pcm 106496 5 snd_soc_rt5670,snd_soc_core,snd_soc_sst_cht_bsw_rt5672,snd_soc_sst_mfld_platform,snd_pcm_dmaengine snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 32768 2 snd_pcm,snd_seq snd 86016 10 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress soundcore 16384 1 snd I have no idea with the next step, so can anyone give a look? Thanks Tu __________ Information from ESET Smart Security, version of virus signature database 4468 (20090929) __________ The message was checked by ESET Smart Security. http://www.eset.com __________ Information from ESET Smart Security, version of virus signature database 4468 (20090929) __________ The message was checked by ESET Smart Security. http://www.eset.com

2 1

[alsa-devel] [PATCH 0/13] ALSA: Deletion of some unnecessary checks
by SF Markus Elfring 26 Oct '16

26 Oct '16

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Sun, 4 Jan 2015 11:50:12 +0100 Further update suggestions were taken into account after several patches were applied from static source code analysis. Markus Elfring (3): seq: Deletion of unnecessary checks before the function call "snd_midi_event_free" oss: Deletion of unnecessary checks before the function call "vfree" emu10k1: Delete an unnecessary check before the function call "kfree" oxygen: Delete an unnecessary check before the function call "snd_pcm_suspend" emux: Delete an unnecessary check before the function call "snd_sf_free" ASoC: Intel: Delete an unnecessary check before the function call "sst_dma_free" ASoC: fsi: Deletion of unnecessary checks before the function call "clk_enable" ASoC: Intel: Delete an unnecessary check before the function call "release_firmware" i2sbus: Delete an unnecessary check before the function call "snd_pcm_suspend_all" sb: Delete an unnecessary check before the function call "snd_emux_free" Deletion of checks before the function call "iounmap" msnd: One function call less in snd_msnd_attach() after error detection msnd: Fix centralized exiting from snd_msnd_attach() sound/aoa/soundbus/i2sbus/core.c | 13 ++++++------- sound/arm/aaci.c | 4 ++-- sound/drivers/ml403-ac97cr.c | 3 +-- sound/isa/msnd/msnd_pinnacle.c | 31 ++++++++++++++++--------------- sound/parisc/harmony.c | 4 +--- sound/pci/ad1889.c | 5 +---- sound/pci/asihpi/hpioctl.c | 6 ++---- sound/pci/atiixp.c | 3 +-- sound/pci/atiixp_modem.c | 3 +-- sound/pci/aw2/aw2-alsa.c | 4 +--- sound/pci/bt87x.c | 3 +-- sound/pci/cs4281.c | 6 ++---- sound/pci/cs46xx/cs46xx_lib.c | 4 ++-- sound/pci/ctxfi/cthw20k1.c | 5 +---- sound/pci/ctxfi/cthw20k2.c | 5 +---- sound/pci/echoaudio/echoaudio.c | 6 +----- sound/pci/hda/hda_intel.c | 3 +-- sound/pci/lola/lola.c | 6 ++---- sound/pci/mixart/mixart.c | 7 +++---- sound/pci/nm256/nm256.c | 6 ++---- sound/pci/rme9652/hdsp.c | 4 +--- sound/pci/rme9652/hdspm.c | 4 +--- sound/pci/rme9652/rme9652.c | 3 +-- sound/pci/sis7019.c | 5 +---- sound/pci/ymfpci/ymfpci_main.c | 3 +-- sound/ppc/pmac.c | 15 +++++---------- 26 files changed, 58 insertions(+), 103 deletions(-) -- 2.2.1

5 25

[alsa-devel] [PATCH] ASoC: topology: Reenable use from userspace
by Mark Brown 11 Oct '16

11 Oct '16

We had inserted a #error into the topology UAPI code to ensure that the ABI was not adopted by userspace while final review and testing was ongoing. Since we are now comfortable that the ABI is suitable for production remove the #error, future changes will include provision for backwards compatibility. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Are we OK with this? Looking for some acks and reviews... include/uapi/sound/asoc.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 247c50b..51b8066 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -18,12 +18,6 @@ #include <linux/types.h> #include <sound/asound.h> -#ifndef __KERNEL__ -#error This API is an early revision and not enabled in the current -#error kernel release, it will be enabled in a future kernel version -#error with incompatible changes to what is here. -#endif - /* * Maximum number of channels topology kcontrol can represent. */ -- 2.6.1

4 6

[alsa-devel] [PATCH RFC 0/6] ASoC: sgtl5000: fix use of regulators and internal LDO
by Eric Nelson 15 Jun '16

15 Jun '16

This patch set addresses a structural problem in the handling of regulators for VDDIO, VDDA, and VDDD in the SGTL5000 driver. The first two of these power rails must be powered on prior to any I2C communication, and yet the regulators were tied to the codec, which is instantiated only after a fair amount of I2C communication takes place. In other words, these regulators could never have function, and we can surmise that no user of this driver has switched power supply rails connected to them. The third power rail (VDDD) can be derived internally (by using I2C registers) though the data sheet says that if an external VDDD is used, it should be enabled before MCLK is started and I2C activity begins. Patch 1 moves the regulators to the I2C device and initializes them before I2C activity. Patch 2 addresses an issue found during development of the patch and is somewhat unrelated to regulators. It is included for discussion Patch 3 removes the root cause of patch 2 Patch 4 adds return value checks when setting the LINREG and ANA_POWER registers Patch 5 addresses the cause of follow-on failures and the source of the error in patch 3. Patch 6 removes the naive use of the supplies to lower power consumption and replaces it with something more modest. The patch set is being sent as an RFC for discussion, and should probably be squashed into two or three patches covering the regulator updates (patches 1, 3-5 and perhaps 6), initialization error handling (patch 2). Eric Nelson (6): ASoC: sgtl5000: fix regulator support ASoC: sgtl5000: write all default registers ASoC: sgtl5000: initialize CHIP_ANA_POWER to power-on defaults ASoC: sgtl5000: check return values ASoC: sgtl5000: disable internal PLL early ASoC: sgtl5000: Don't disable regulators in SND_SOC_BIAS_OFF sound/soc/codecs/sgtl5000.c | 417 +++++++++++--------------------------------- sound/soc/codecs/sgtl5000.h | 2 + 2 files changed, 102 insertions(+), 317 deletions(-) -- 1.9.1

3 28

[alsa-devel] [PATCH v2 0/6] ASoC: fsl_ssi: Fixing various channel slips and bad samples insertions
by Arnaud Mouiche 13 May '16

13 May '16

This series of patch is an attempt to fix the fsl_ssi driver to use it in TDM mode (DSP A or B) with a large number of channels/slots. Version 2: - fixing a missing patch - checkpatch.pl - ... well, learning how to send a patchset. Sorry. ;) Bugs are detected and fixed on a imx6sl platform with linux 4.3, where 2 SSI interfaces are used. SSI3 configured as a master of the bus, SSI2 as a slave. Various loopback scenario are tested: * scenario 1: SSI3 (master) with TXD to RXD loopback | |---> TXD --\ SSI3 |<--- RXD --/ (master) |---> SYNC |---> BCLK | * scenario 2: SSI3 connected to SSI2 | |---> TXD --------\ SSI3 |<--- RXD -----\ | (master) |---> SYNC --\ | | |---> BCLK | | | | | | | | | | | | | |<--- BCLK | | | SSI2 |<--- SYNC --/ | | (slave) |---> TXD ------/ | |<--- RXD --------/ | A test software (called atest) was developed and available. [1] It basically generate/check specials frames with S16_LE sequence samples NNN0, NNN1, NNN2 ... NNNC with NNN = frame number, and C the number of channels-1 Patch 1: Limitation fix. Prerequisite to use the fsl_ssi driver with up to 32 channels / slots Patch 2: Bug fix. Prerequisite to setup a relative high bitclk for our tests in 8ch / 16bits / 48kHz Patch 3: Simply save a 'dev' reference inside ssi_private for dev_err() purpose. (ssi_private is only available in lot of places, and ssi_private->pdev is deprecated and NULL indeed) Patch 4: Fix playback samples being dropped because the TX fifo was not ready at the time the DMA starts filling (only in case where playback is started AFTER the capture) Detected in loopback scenario 1, with following script (> 80 % of reproducibility) $ atest -D SSI3 -c 8 -r 48000 capture play dbg: set period size: 960 dbg: SSI3: capture_start dbg: SSI3: playback_start err: invalid frame after 1 null frames err: 0000 0000 0013 0014 0015 0016 0017 0020 dbg: SIGINT total number of sequence errors: 21119 here we see that samples 0000 0001 ... 0012 are not present in the output. In addition, this the number of samples dropped is not a multiple of the number of channel, we have a a channel slip. Patch 5: This is the Caleb Crome's case [2], where the SSI starts to generate samples while the TX FIFO is not filled by the DMA yet. Void samples can be inserted before DMA streaming. Detected in loopback scenario 2, with following script (reproducibility < 1%) $ atest -D SSI3 -c 8 -r 48000 capture & $ sleep 0.2 $ atest -d 1 -D SSI2 -c 8 -r 48000 play dbg: SSI3: capture_start dbg: set period size: 960 dbg: SSI2: playback_start dbg: start a 1 seconds duration timer err: invalid frame after 11568 null frames err: 0000 0010 0011 0012 0013 0014 0015 0016 err: 0017 0020 0021 0022 0023 0024 0025 0026 Patch 6: Deals with Capture restart whereas Playback is still running (or the opposite, Playback restart whereas Capture is till running). Capture restart whereas Playback case is detected in loopback scenario 1 (reproducibility 100%). A playback session is running in background, and 2 consecutive Captures are performed. The first is fine, the second fails. We see at the 2nd capture startup that we receive 15 samples still pending in the RX FIFO from the previous capture session. => We are receiving invalid samples + slips the channels $ atest -D SSI3 -c 8 -r 48000 play & dbg: SSI3: playback_start $ atest -d 1 -D SSI3 -c 8 -r 48000 capture dbg: SSI3: capture_start dbg: start a 1 seconds duration timer warn: Valid frame after 1 null frames warn: 3a90 3a91 3a92 3a93 3a94 3a95 3a96 3a97 total number of sequence errors: 0 $ atest -I 5 -d 1 -D SSI3 -c 8 -r 48000 capture # restart the capture dbg: SSI3: capture_start dbg: start a 1 seconds duration timer err: invalid frame after 1 null frames err: 8dd6 8dd7 8de0 8de1 8de2 8de3 8de4 8de5 err: 8de6 8de7 8df0 8df1 8df2 8df3 8df4 c0c0 err: c0c1 c0c2 c0c3 c0c4 c0c5 c0c6 c0c7 c0d0 err: c0d1 c0d2 c0d3 c0d4 c0d5 c0d6 c0d7 c0e0 err: c0e1 c0e2 c0e3 c0e4 c0e5 c0e6 c0e7 c0f0 Playback restart whereas Capture case is also detected with loopback scenario 1 (reproducibility 100%), capturing continuously, and playing by periods of time. $ atest -a -D SSI3 -c 8 -r 48000 capture play -r 1000,200 dbg: SSI3: capture_start dbg: SSI3: playback_start dbg: SSI3: will stop every 1000 ms during 200 ms warn: Valid frame after 4 null frames warn: 0010 0011 0012 0013 0014 0015 0016 0017 warn: SSI3: PT_W4_STOP warn: SSI3: PT_W4_RESTART err: invalid frame after 1602 null frames err: eaa1 eaa2 eaa3 eaa4 eaa5 eaa6 eaa7 eab0 err: eab1 eab2 eab3 eab4 5810 5811 5812 5813 dbg: stop on first error total number of sequence errors: 143 Both cases are resolved by using the mostly undocumented SOR.RX_CLR and SOR TX_CLR (we can find the documentation in IMX51 reference manual at section 56.3.3.15). Arnaud [1] https://github.com/amouiche/atest [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-October/099221.ht… Arnaud Mouiche (6): ASoC: fsl_ssi: Real hardware channels max number is 32 ASoC: fsl_ssi: The IPG/5 limitation concerns the bitclk, not the sysclk. ASoC: fsl_ssi: Save a dev reference for dev_err() purpose. ASoC: fsl_ssi: Fix samples being dropped as Playback startup ASoC: fsl_ssi: Fix channel slipping in Playback at startup ASoC: fsl_ssi: Fix channel slipping on capture (or playback) restart in full duplex. sound/soc/fsl/fsl_ssi.c | 74 +++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 11 deletions(-) -- 1.9.1

5 11

[alsa-devel] [PATCH 0/5] ASoC: fsl_ssi: Fixing various channel slips and bad samples insertions
by Arnaud Mouiche 13 May '16

13 May '16

This series of patch is an attempt to fix the fsl_ssi driver to use it in TDM mode (DSP A or B) with a large number of channels/slots. Bugs are detected and fixed on a imx6sl platform with linux 4.3, where 2 SSI interfaces are used. SSI3 configured as a master of the bus, SSI2 as a slave. Various loopback scenario are tested: * scenario 1: SSI3 (master) with TXD to RXD loopback | |---> TXD --\ SSI3 |<--- RXD --/ (master) |---> SYNC |---> BCLK | * scenario 2: SSI3 connected to SSI2 | |---> TXD --------\ SSI3 |<--- RXD -----\ | (master) |---> SYNC --\ | | |---> BCLK | | | | | | | | | | | | | |<--- BCLK | | | SSI2 |<--- SYNC --/ | | (slave) |---> TXD ------/ | |<--- RXD --------/ | A test software (called atest) was developed and available. [1] It basically generate/check specials frames with S16_LE sequence samples NNN0, NNN1, NNN2 ... NNNC with NNN = frame number, and C the number of channels-1 Patch 1: Limitation fix. Prerequisite to use the fsl_ssi driver with up to 32 channels / slots Patch 2: Bug fix. Prerequisite to setup a relative high bitclk for our tests in 8ch / 16bits / 48kHz Patch 3: Simply save a 'dev' reference inside ssi_private for dev_err() purpose. (ssi_private is only available in lot of places, and ssi_private->pdev is deprecated and NULL indeed) Patch 4: Fix playback samples being dropped because the TX fifo was not ready at the time the DMA starts filling (only in case where playback is started AFTER the capture) Detected in loopback scenario 1, with following script (> 80 % of reproducibility) $ atest -D SSI3 -c 8 -r 48000 capture play dbg: set period size: 960 dbg: SSI3: capture_start dbg: SSI3: playback_start err: invalid frame after 1 null frames err: 0000 0000 0013 0014 0015 0016 0017 0020 dbg: SIGINT total number of sequence errors: 21119 here we see that samples 0000 0001 ... 0012 are not present in the output. In addition, this the number of samples dropped is not a multiple of the number of channel, we have a a channel slip. Patch 5: This is the Caleb Crome's case [2], where the SSI starts to generate samples while the TX FIFO is not filled by the DMA yet. Void samples can be inserted before DMA streaming. Detected in loopback scenario 2, with following script (reproducibility < 1%) $ atest -D SSI3 -c 8 -r 48000 capture & $ sleep 0.2 $ atest -d 1 -D SSI2 -c 8 -r 48000 play dbg: SSI3: capture_start dbg: set period size: 960 dbg: SSI2: playback_start dbg: start a 1 seconds duration timer err: invalid frame after 11568 null frames err: 0000 0010 0011 0012 0013 0014 0015 0016 err: 0017 0020 0021 0022 0023 0024 0025 0026 Patch 6: Deals with Capture restart whereas Playback is still running (or the opposite, Playback restart whereas Capture is till running). Capture restart whereas Playback case is detected in loopback scenario 1 (reproducibility 100%). A playback session is running in background, and 2 consecutive Captures are performed. The first is fine, the second fails. We see at the 2nd capture startup that we receive 15 samples still pending in the RX FIFO from the previous capture session. => We are receiving invalid samples + slips the channels $ atest -D SSI3 -c 8 -r 48000 play & dbg: SSI3: playback_start $ atest -d 1 -D SSI3 -c 8 -r 48000 capture dbg: SSI3: capture_start dbg: start a 1 seconds duration timer warn: Valid frame after 1 null frames warn: 3a90 3a91 3a92 3a93 3a94 3a95 3a96 3a97 total number of sequence errors: 0 $ atest -I 5 -d 1 -D SSI3 -c 8 -r 48000 capture # restart the capture dbg: SSI3: capture_start dbg: start a 1 seconds duration timer err: invalid frame after 1 null frames err: 8dd6 8dd7 8de0 8de1 8de2 8de3 8de4 8de5 err: 8de6 8de7 8df0 8df1 8df2 8df3 8df4 c0c0 err: c0c1 c0c2 c0c3 c0c4 c0c5 c0c6 c0c7 c0d0 err: c0d1 c0d2 c0d3 c0d4 c0d5 c0d6 c0d7 c0e0 err: c0e1 c0e2 c0e3 c0e4 c0e5 c0e6 c0e7 c0f0 Playback restart whereas Capture case is also detected with loopback scenario 1 (reproducibility 100%), capturing continuously, and playing by periods of time. $ atest -a -D SSI3 -c 8 -r 48000 capture play -r 1000,200 dbg: SSI3: capture_start dbg: SSI3: playback_start dbg: SSI3: will stop every 1000 ms during 200 ms warn: Valid frame after 4 null frames warn: 0010 0011 0012 0013 0014 0015 0016 0017 warn: SSI3: PT_W4_STOP warn: SSI3: PT_W4_RESTART err: invalid frame after 1602 null frames err: eaa1 eaa2 eaa3 eaa4 eaa5 eaa6 eaa7 eab0 err: eab1 eab2 eab3 eab4 5810 5811 5812 5813 dbg: stop on first error total number of sequence errors: 143 Both cases are resolved by using the mostly undocumented SOR.RX_CLR and SOR TX_CLR (we can find the documentation in IMX51 reference manual at section 56.3.3.15). Arnaud [1] https://github.com/amouiche/atest [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-October/099221.ht… Arnaud Mouiche (5): ASoC: fsl_ssi: The IPG/5 limitation concerns the bitclk, not the sysclk. ASoC: fsl_ssi: Save a dev reference for dev_err() purpose. ASoC: fsl_ssi: Fix samples being dropped as Playback startup ASoC: fsl_ssi: Fix channel slipping in Playback at startup ASoC: fsl_ssi: Fix channel slipping on capture (or playback) restart in full duplex. sound/soc/fsl/fsl_ssi.c | 69 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 60 insertions(+), 9 deletions(-) -- 1.9.1

4 17

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel November 2015