July 2023 - Alsa-devel - mailman.alsa-project.org

[v3 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 27 Nov '23

27 Nov '23

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 32 +++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 113 insertions(+), 10 deletions(-) -- 2.25.1

5 10

Yamaha YIT-W12TX not working
by Julian Sikorski 27 Nov '23

27 Nov '23

Hi list, Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work: [ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily. Best regards, Julian [1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/down… [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downl…

2 7

[PATCH v3 00/42] ep93xx device tree conversion
by Nikita Shubin via B4 Relay 13 Nov '23

13 Nov '23

This series aims to convert ep93xx from platform to full device tree support. The main goal is to receive ACK's to take it via Arnd's arm-soc branch. I've moved to b4, tricking it to consider v0 as v1, so it consider's this version to be v3, this exactly the third version. Link to previous versions: https://lore.kernel.org/all/20230424123522.18302-1-nikita.shubin@maquefel.m… Major changes with clocks: - split all ep93xx clk into two groups: - those who are special to ep93xx (i.e. can't be implemented via standard clk's) and use special swlocked registers - those who can be implemented via devm_clk_hw_register_gate, etc... - moved all clk's that are not used via device tree to SoC driver - dropped init and globals - devm_* everywhere Other notable changes: - added a global spinlock for SoC driver to protect swlocked register's. - moved dts file into cirrus - dropped "dt-bindings: gpio: Add Cirrus EP93xx" as it was taken by Bartosz via gpio subsystem on master v6.5-rc2-89-g3acbd4602b05: make dtbs_check ``` make -j34 -C build-linux ARCH=arm CROSS_COMPILE=armv4t-softfloat-linux-gnueabi- dtbs_check -s arch/arm/boot/dts/cirrus/ep93xx-edb9302.dtb:0:0: /soc/spi@808a0000/codec@0: failed to match any schema with compatible: ['cirrus,cs4271'] /home/maquefel/workshop/ts7250-boot-build/build-linux/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dtb: sound: 'simple-audio-card,convert-sample-format' does not match any of the regexes: '^simple-audio-card,codec(@[0-9a-f]+)?$', '^simple-audio-card,cpu(@[0-9a-f]+)?$', '^simple-audio-card,dai-link(@[0-9a-f]+)?$', '^simple-audio-card,plat(@[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/maquefel/workshop/ts7250-boot-build/linux/Documentation/devicetree/bindings/sound/simple-card.yaml ``` cirrus,cs4271 is defined in linux/Documentation/devicetree/bindings/sound/cs4271.txt `make dt_binding_check` shows no issues. [PATCH v1 01/43] gpio: ep93xx: split device in multiple - core.c: - fixed tab used instead of space - unsigned i in ep93xx_init_devices - gpio-ep93xx.c: - single line for EP93XX_INT_DEBOUNCE_OFFSET - drop assignment from definition - s/devm_kcalloc/devm_kzalloc/ - value check for platform_get_irq - used dev_err_probe - s/if (irq <= 0)/if (irq < 0)/ [PATCH v1 02/43] dt-bindings: soc: Add Cirrus EP93xx - fixed title - dropped "+|" - dropped example, syscon, timer, required - dropped clock header from this patch and moved to clk patch - don't shadow irq_of_parse_and_map error NOTES: There is no possiblity to use fwnode_irq_get for TIMER_OF_DECLARE. [PATCH v1 03/43] soc: Add SoC driver for Cirrus ep93xx - s/Soc/SoC/ - sorted Kconfig, Makefile - s/linux/Linux/ - headers sorted - drop parentness - drop comment entirely (it's obvious) - drop global map - add SoC Bus stuff to get rid of exporting ep93xx_chip_revision Only PATA and CLK currently rely on revision, they can take it from soc_device_match. [PATCH v1 04/43] dt-bindings: clock: Add Cirrus EP93xx - filename now matches compatible - dropped description - dropped clock description - dropped fixed-clock from example - compatible first in example [PATCH v1 06/43] dt-bindings: pinctrl: Add Cirrus EP93xx - blank line after function - dropped minItems, maxItems for groups - fixed weird wrapping [PATCH v1 07/43] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin - dropped 0 assigment in enum ep93xx_pinctrl_model - convert to pingroup - convert to pinfunction - str_enabled_disabled - s/of_match_node/of_device_get_match_data/ - numerous defaults for cases - convert to dev_err_probe - dropped dev_info noise - add "gpio2agrp" to ep9301/ep9302 as they have 0 pin of Port C exposed [PATCH v1 09/43] clocksource: ep93xx: Add driver for Cirrus Logic EP93xx - headers sorted - fixed comment - use lo_hi_readq and UINT_MAX [PATCH 12/43] clk: ep93xx: add DT support for Cirrus EP93xx - move out all clocks that aren't used in device tree to SoC driver (pll1, pll2, usb) - drop all static variables (regmap, clock data) - DMA and USB clocks as standart gates to avoid additional checks (all other require swlocked_write) - rearranged ep93xx_clk members to avoid holes - numerous fixes from Andy - don't get revision, use soc_device_match instead - added own clk_get function to distinguish fixed and own clocks [PATCH v1 14/43] power: reset: Add a driver for the ep93xx reset - added private data with regmap, as we dropped global regmap in SoC dirver - use dev_err_probe - + bits.h header [PATCH v1 17/43] dt-bindings: spi: Add Cirrus EP93xx - fixed filename to cirrus,ep9301-spi.yaml - dropped address and size cells - dropped cs-gpio - dropped cirrus,ep9301-use-dma - we are looking into "dmas" property now - added proper gpio defines [PATCH v1 18/43] spi: ep93xx: add DT support for Cirrus EP93xx - use device_set_node + dev_fwnode - s/of_property_present/device_property_present/ [PATCH v1 20/43] net: cirrus: add DT support for Cirrus EP93xx - +dev_err_probe [PATCH v1 22/43] dma: cirrus: add DT support for Cirrus EP93xx - dropped subsys_initcall probe - use of_device_get_match_data - use struct_size for allocating memory with channel array - rearranged data to take it out of CONFIG_OF - + dev_err_probe [PATCH v1 23/43] dt-bindings: mtd: Add ts7250 nand-controller - unevaluatedProperties: false - dropped address and size cells - added nand node [PATCH v1 24/43] mtd: nand: add support for ts72xx - return -EINVAL on engine_type == ON_HOST - added err_nand_cleanup goto - s/derived/Derived from/ - BIT and GENMASK - s/sizeof(struct ts72xx_nand_data)/sizeof(*data)/ and one line - fixed wierd mtd_device_parse_register error handling - added child node parsing to conform device tree bindings (i.e. partitions contained in 'nand@0' child node) [PATCH v1 26/43] pata: cirrus: add DT support for Cirrus EP93xx - headers reordering - s/-ENXIO/-ENOMEM/ - drop ep93xx_chip_revision, get data from soc_device_match - changed title to "ata: pata_ep93xx: add device tree support" [PATCH v1 27/43] dt-bindings: input: Add Cirrus EP93xx keypad - s/cirrus,debounce-delay-ms/debounce-delay-ms/ - cirrus,prescale -> uint16 and constraints - added "autorepeat" - fixed compatible in example [PATCH v1 28/43] input: keypad: ep93xx: add DT support for Cirrus EP93xx - added autorepeat - dropped module param flags entirely - s/of_property_read/device_property_read/ [PATCH v1 29/43] dt-bindings: rtc: Add ST M48T86 - renamed file to st,m48t86.yaml - fixed typo - reordered props [PATCH v1 33/43] dt-bindings: gpio: Add Cirrus EP93xx - renamed file to cirrus,ep9301-gpio.yaml - dropped explicit examples (but left port F with uses 8 interrupts) [PATCH v1 34/43] gpio: ep93xx: add DT support for gpio-ep93xx - s/Add match table./Add OF ID match table./ [PATCH v1 35/43] ARM: dts: add device tree for ep93xx Soc - splitted dtsi and dts - made nand-controller, leds, etc... part of the board and not SoC - dropped empty spi bus - labels sorted - dropped "delete-property" everywhere - compatible first, reg is second, ranges, if present, third - fixed wrapping - status last - moved cs gpios to board files - led0 -> led-0, led1 -> led-1 [PATCH v1 38/43] pata: cirrus: drop legacy pinctrl - changed title to "ata: pata_ep93xx: remove legacy pinctrl use" - removed ep93xx_ide_acquire_gpio and ep93xx_ide_release_gpio along with this patch -- 2.39.2 --- Alexander Sverdlin (2): ARM: dts: ep93xx: Add EDB9302 DT ASoC: cirrus: edb93xx: Delete driver Nikita Shubin (40): gpio: ep93xx: split device in multiple dt-bindings: clock: Add Cirrus EP93xx clk: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pinctrl: Add Cirrus EP93xx pinctrl: add a Cirrus ep93xx SoC pin controller dt-bindings: soc: Add Cirrus EP93xx soc: Add SoC driver for Cirrus ep93xx dt-bindings: timers: Add Cirrus EP93xx clocksource: ep93xx: Add driver for Cirrus Logic EP93xx dt-bindings: rtc: Add Cirrus EP93xx rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: watchdog: Add Cirrus EP93x watchdog: ep93xx: add DT support for Cirrus EP93xx power: reset: Add a driver for the ep93xx reset dt-bindings: pwm: Add Cirrus EP93xx pwm: ep93xx: add DT support for Cirrus EP93xx dt-bindings: spi: Add Cirrus EP93xx spi: ep93xx: add DT support for Cirrus EP93xx dt-bindings: net: Add Cirrus EP93xx net: cirrus: add DT support for Cirrus EP93xx dt-bindings: dma: Add Cirrus EP93xx dma: cirrus: add DT support for Cirrus EP93xx dt-bindings: mtd: Add ts7200 nand-controller mtd: nand: add support for ts72xx dt-bindings: ata: Add Cirrus EP93xx ata: pata_ep93xx: add device tree support dt-bindings: input: Add Cirrus EP93xx keypad input: keypad: ep93xx: add DT support for Cirrus EP93xx dt-bindings: rtc: Add ST M48T86 rtc: m48t86: add DT support for m48t86 dt-bindings: wdt: Add ts72xx wdt: ts72xx: add DT support for ts72xx gpio: ep93xx: add DT support for gpio-ep93xx ARM: dts: add Cirrus EP93XX SoC .dtsi ARM: dts: ep93xx: add ts7250 board ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms pwm: ep93xx: drop legacy pinctrl ata: pata_ep93xx: remove legacy pinctrl use ARM: ep93xx: delete all boardfiles ARM: ep93xx: soc: drop defines .../bindings/arm/cirrus/ep9301-syscon.yaml | 59 + .../devicetree/bindings/arm/cirrus/ep9301.yaml | 39 + .../bindings/ata/cirrus,ep9312-pata.yaml | 44 + .../bindings/clock/cirrus,ep9301-clk.yaml | 46 + .../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 72 + .../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 124 ++ .../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++ .../devicetree/bindings/mtd/technologic,nand.yaml | 47 + .../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 61 + .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml | 58 + .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 48 + .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml | 40 + .../devicetree/bindings/rtc/st,m48t86.yaml | 38 + .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 63 + .../bindings/timer/cirrus,ep9301-timer.yaml | 49 + .../bindings/watchdog/cirrus,ep9301-wdt.yaml | 46 + .../bindings/watchdog/technologic,ts7200-wdt.yaml | 46 + arch/arm/Makefile | 1 - arch/arm/boot/dts/cirrus/Makefile | 4 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 126 ++ arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 178 +++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 ++ arch/arm/boot/dts/cirrus/ep93xx.dtsi | 449 ++++++ arch/arm/mach-ep93xx/Kconfig | 20 +- arch/arm/mach-ep93xx/Makefile | 11 - arch/arm/mach-ep93xx/clock.c | 733 ---------- arch/arm/mach-ep93xx/core.c | 1017 -------------- arch/arm/mach-ep93xx/dma.c | 114 -- arch/arm/mach-ep93xx/edb93xx.c | 344 ----- arch/arm/mach-ep93xx/ep93xx-regs.h | 38 - arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 -- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 - arch/arm/mach-ep93xx/platform.h | 42 - arch/arm/mach-ep93xx/soc.h | 212 --- arch/arm/mach-ep93xx/ts72xx.c | 422 ------ arch/arm/mach-ep93xx/ts72xx.h | 94 -- arch/arm/mach-ep93xx/vision_ep9307.c | 311 ----- drivers/ata/pata_ep93xx.c | 49 +- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-ep93xx.c | 764 +++++++++++ drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + .../clocksource}/timer-ep93xx.c | 155 ++- drivers/dma/ep93xx_dma.c | 131 +- drivers/gpio/gpio-ep93xx.c | 332 ++--- drivers/input/keyboard/ep93xx_keypad.c | 74 +- drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/technologic-nand-controller.c | 162 +++ drivers/net/ethernet/cirrus/ep93xx_eth.c | 61 +- drivers/pinctrl/Kconfig | 7 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ep93xx.c | 1447 ++++++++++++++++++++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ep93xx-restart.c | 86 ++ drivers/pwm/pwm-ep93xx.c | 26 +- drivers/rtc/rtc-ep93xx.c | 8 + drivers/rtc/rtc-m48t86.c | 8 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/cirrus/Kconfig | 12 + drivers/soc/cirrus/Makefile | 2 + drivers/soc/cirrus/soc-ep93xx.c | 231 ++++ drivers/spi/spi-ep93xx.c | 28 +- drivers/watchdog/ep93xx_wdt.c | 8 + drivers/watchdog/ts72xx_wdt.c | 8 + include/dt-bindings/clock/cirrus,ep93xx-clock.h | 41 + include/dt-bindings/dma/cirrus,ep93xx-dma.h | 26 + include/linux/platform_data/dma-ep93xx.h | 25 +- include/linux/platform_data/eth-ep93xx.h | 10 - include/linux/platform_data/keypad-ep93xx.h | 32 - include/linux/soc/cirrus/ep93xx.h | 33 +- sound/soc/cirrus/Kconfig | 9 - sound/soc/cirrus/Makefile | 4 - sound/soc/cirrus/edb93xx.c | 117 -- 78 files changed, 5205 insertions(+), 4174 deletions(-) --- base-commit: ccff6d117d8dc8d8d86e8695a75e5f8b01e573bf change-id: 20230605-ep93xx-01c76317e2d2 Best regards, -- Nikita Shubin <nikita.shubin(a)maquefel.me>

15 90

Re: RFC: usb: gadget: u_audio: Notifying gadget that host started playback/capture?
by Pavel Hofman 30 Oct '23

30 Oct '23

Hi, Dne 08. 09. 21 v 10:21 Pavel Hofman napsal(a): > Hi, > > The current audio gadget has no way to inform the gadget side that the > host side has started playback/capture and that gadget-side alsa > processes should be started. > > Playback/capture processes on the host side do not get stuck without the > gadget side consuming/producing data (OUT requests are ignored in > u_audio_iso_complete, IN ones send initial zeros in their req->buf). > > However, playback/capture processes on the gadget side get stuck without > the host side sending playback OUT packets or capture IN requests and > time out with error. If there was a way to inform the gadget side that > playback/capture has started on the host side, the gadget clients could > react accordingly. > I drafted a simple patch for u_audio.c which defines read-only boolean ctl elems "Capture Requested" and "Playback Requested". Their values are set/reset in methods u_audio_start_capture/playback and u_audio_stop_capture/playback, i.e. at changes of respective altsettings from 0 to 1 and back. Every ctl elem value change sends notification via snd_ctl_notify. The principle works OK for capture/playback start/stop on the host, as monitored by alsactl: pi@raspberrypi:~ $ alsactl monitor hw:UAC2Gadget node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE However at enumeration the USB host switches both playback and capture altsettings repeatedly, generating "fake" events from the gadget side POW. The host even sends regular-sized EP-OUT packets filled with zeros during enumeration (tested on linux only for now). Please is there any way to "detect" the enumeration stage to mask out the "fake" playback/capture start/stop events? The attached patch does not apply cleanly to mainline u_audio.c because it's rebased on other patches not submitted yet but it's only a discussion inducer for now. Thanks a lot, Pavel.

2 6

[PATCH 0/4] ASoC: qcom: fixes for Click/Pop Noise
by Srinivas Kandagatla 27 Oct '23

27 Oct '23

Click/Pop Noise was a long pending issue with WSA Codecs which are prone to accumlate DC when ports are active but without any data streams. There are multiple places in the current setup, where this could happen in both startup as well as shutdown path. This patches help fix those issues by making sure the PA is Muted/Unmuted inline with the stream start/stop events. Other than this there is a patch to fix DSP graph saturation issue as we never unload playback graph before loading same graph. Srinivas Kandagatla (4): ASoC: qcom: q6apm-lpass-dai: close graphs before opening a new one ASoC: qcom: sdw: do not restart soundwire ports for every prepare ASoC: codecs: wsa883x: mute/unmute PA in correct sequence ASoC: codecs: wsa881x: mute/unmute PA in correct sequence sound/soc/codecs/wsa881x.c | 30 ++++++++++++++++++++- sound/soc/codecs/wsa883x.c | 36 ++++++++++++++++++++----- sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 3 +++ sound/soc/qcom/sdw.c | 7 ++--- 4 files changed, 63 insertions(+), 13 deletions(-) -- 2.21.0

4 16

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[PATCH 0/3] ARM: omap4: embt2ws: Add audio support
by Andreas Kemnade 25 Oct '23

25 Oct '23

Add audio support for Epson Moverio BT-200. In the vendor kernel, the MCBSP side is used as master, so do it here also that way. Andreas Kemnade (3): ASoC: ti: omap-mcbsp: Ignore errors for getting fck_src ASoC: tlv320aic3x: use BCLK instead of MCLK if not in master mode ARM: dts: omap4: embt2ws: Add audio support arch/arm/boot/dts/omap4-epson-embt2ws.dts | 21 +++++++++++++++++++++ sound/soc/codecs/tlv320aic3x.c | 4 ++++ sound/soc/ti/omap-mcbsp.c | 4 ++-- 3 files changed, 27 insertions(+), 2 deletions(-) -- 2.39.2

4 28

[PATCH v3 00/11] Introduce STM32 Firewall framework
by Gatien Chevallier 25 Sep '23

25 Sep '23

Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers register to the framework to offer firewall services such as access granting. This series of patches is a new approach on the previous STM32 system bus, history is available here: https://lore.kernel.org/lkml/20230127164040.1047583/ The need for such framework arises from the fact that there are now multiple hardware firewalls implemented across multiple products. Drivers are shared between different products, using the same code. When it comes to firewalls, the purpose mostly stays the same: Protect hardware resources. But the implementation differs, and there are multiple types of firewalls: peripheral, memory, ... Some hardware firewall controllers such as the RIFSC implemented on STM32MP2x platforms may require to take ownership of a resource before being able to use it, hence the requirement for firewall services to take/release the ownership of such resources. On the other hand, hardware firewall configurations are becoming more and more complex. These mecanisms prevent platform crashes or other firewall-related incoveniences by denying access to some resources. The stm32 firewall framework offers an API that is defined in firewall controllers drivers to best fit the specificity of each firewall. For every peripherals protected by either the ETZPC or the RIFSC, the firewall framework checks the firewall controlelr registers to see if the peripheral's access is granted to the Linux kernel. If not, the peripheral is configured as secure, the node is marked populated, so that the driver is not probed for that device. The firewall framework relies on the feature-domain-controller device tree bindings: https://lore.kernel.org/lkml/0c0a82bb-18ae-d057-562b. It is used by peripherals to reference a domain controller, in this case a firewall feature domain. The bus uses the ID referenced by the feature-domains property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. The STM32 ETZPC device is responsible for filtering accesses based on security level, or co-processor isolation for any resource connected to it. The RIFSC is responsible for filtering accesses based on Compartment ID / security level / privilege level for any resource connected to it. STM32MP13/15/25 SoC device tree files are updated in this series to implement this mecanism. Changes in V2: generic: - Add fw_devlink dependency for "feature-domains" property. bindings: - Corrected YAMLS errors highlighted by Rob's robot - Firewall controllers YAMLs no longer define the maxItems for the "feature-domains" property - Renamed st,stm32-rifsc.yaml to st,stm32mp25-rifsc.yaml - Fix examples in YAML files - Change feature-domains maxItems to 2 in firewall consumer files as there should not be more than 2 entries for now - Declare "feature-domain-names" as an optional property for firewall controllers child nodes. - Add missing "feature-domains" property declaration in bosch,m_can.yaml and st,stm32-cryp.yaml files firewall framework: - Support multiple entries for "feature-domains" property - Better handle the device-tree parsing using phandle+args APIs - Remove "resource firewall" type - Add a field for the name of the firewall entry - Fix licenses RIFSC: - Add controller name - Driver is now a module_platform_driver - Fix license ETZPC: - Add controller name - Driver is now a module_platform_driver - Fix license Device trees: - Fix rifsc node name - Move the "ranges" property under the "feature-domains" one Changes in V3: Change incorrect ordering for bindings commits leading to an error while running "make DT_CHECKER_FLAGS=-m dt_binding_check" Oleksii Moisieiev (1): dt-bindings: Document common device controller bindings Gatien Chevallier (10): dt-bindings: treewide: add feature-domains description dt-bindings: bus: document RIFSC dt-bindings: bus: document ETZPC firewall: introduce stm32_firewall framework of: property: fw_devlink: Add support for "feature-domains" bus: rifsc: introduce RIFSC firewall controller driver arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards bus: etzpc: introduce ETZPC firewall controller driver ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards .../bindings/bus/st,stm32-etzpc.yaml | 96 + .../bindings/bus/st,stm32mp25-rifsc.yaml | 105 + .../bindings/crypto/st,stm32-cryp.yaml | 4 + .../bindings/crypto/st,stm32-hash.yaml | 4 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 4 + .../bindings/dma/st,stm32-dmamux.yaml | 4 + .../feature-domain-controller.yaml | 84 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 + .../bindings/iio/adc/st,stm32-adc.yaml | 4 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 + .../bindings/iio/dac/st,stm32-dac.yaml | 4 + .../bindings/media/cec/st,stm32-cec.yaml | 4 + .../bindings/media/st,stm32-dcmi.yaml | 4 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 4 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 + .../bindings/mfd/st,stm32-timers.yaml | 5 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 4 + .../bindings/net/can/bosch,m_can.yaml | 4 + .../devicetree/bindings/net/stm32-dwmac.yaml | 4 + .../bindings/phy/phy-stm32-usbphyc.yaml | 4 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 4 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 4 + .../bindings/serial/st,stm32-uart.yaml | 4 + .../bindings/sound/st,stm32-i2s.yaml | 4 + .../bindings/sound/st,stm32-sai.yaml | 4 + .../bindings/sound/st,stm32-spdifrx.yaml | 4 + .../bindings/spi/st,stm32-qspi.yaml | 4 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 4 + .../devicetree/bindings/usb/dwc2.yaml | 4 + MAINTAINERS | 7 + arch/arm/boot/dts/st/stm32mp131.dtsi | 1027 +++--- arch/arm/boot/dts/st/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/st/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp13xf.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp151.dtsi | 2757 +++++++++-------- arch/arm/boot/dts/st/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/st/stm32mp15xc.dtsi | 19 +- arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 7 +- drivers/bus/Kconfig | 9 + drivers/bus/Makefile | 1 + drivers/bus/stm32_etzpc.c | 141 + drivers/bus/stm32_firewall.c | 288 ++ drivers/bus/stm32_firewall.h | 83 + drivers/bus/stm32_rifsc.c | 252 ++ drivers/of/property.c | 2 + include/linux/bus/stm32_firewall_device.h | 140 + 47 files changed, 3346 insertions(+), 1919 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml create mode 100644 drivers/bus/stm32_etzpc.c create mode 100644 drivers/bus/stm32_firewall.c create mode 100644 drivers/bus/stm32_firewall.h create mode 100644 drivers/bus/stm32_rifsc.c create mode 100644 include/linux/bus/stm32_firewall_device.h -- 2.25.1

4 17

[PATCH] soundwire: qcom: Log clk_get("iface") failures
by Bjorn Andersson 21 Sep '23

21 Sep '23

Failing to acquire the iface clock makes probing of the Qualcomm SoundWire driver fail without providing any indication to the user. Make the driver log the error to aid debugging system configuration issues. Signed-off-by: Bjorn Andersson <quic_bjorande(a)quicinc.com> --- drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 55be9f4b8d59..e51b1dfce82d 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1550,7 +1550,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->hclk = devm_clk_get(dev, "iface"); if (IS_ERR(ctrl->hclk)) { - ret = PTR_ERR(ctrl->hclk); + ret = dev_err_probe(dev, PTR_ERR(ctrl->hclk), "unable to get iface clock\n"); goto err_init; } -- 2.25.1

3 2

[PATCH 1/2] soundwire: qcom: use newer link status tregister on v2.0.0
by Krzysztof Kozlowski 21 Sep '23

21 Sep '23

Soundwire v2.0.0 comes with a new register LINK_STATUS for the FRAME_GEN_ENABLED field (bit indicating that an active frame is running). The old register COMP_STATUS is still there and still works, although the new one is preferred in downstream sources. Probably because it allows to choose Soundwire instance per CPU. Most of the code allowing to use new register for Soundwire v2.0.0 was already there as part of commit 312355a6a9f6 ("soundwire: qcom: add support for v2.0.0 controller"), so switch to it in swrm_wait_for_frame_gen_enabled() function. This should not have functional impact, because the old register still behaves correctly. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/qcom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index f8fd2eb4a2bb..3ae3e5896308 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -817,8 +817,8 @@ static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *ctrl) int comp_sts; do { - ctrl->reg_read(ctrl, SWRM_COMP_STATUS, &comp_sts); - + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_FRAME_GEN_ENABLED], + &comp_sts); if (comp_sts & SWRM_FRM_GEN_ENABLED) return true; -- 2.34.1

2 2