Alsa-devel December 2014

alsa-devel@alsa-project.org

124 participants
224 discussions

[alsa-devel] Help with wm8731 support for the Utilite (imx6q)
by Jonathan Bennett 06 Apr '16

06 Apr '16

Hey, I'm working with a compulab utilite, trying to get everything working with 3.17, with the eventual goal of getting better support for it upstream. Currently fighting the sound. It's a imx6q talking to a wm8731 over i2c/i2s. I am booting Fedora 21 arm Alpha, with my own dtb ( http://pastebin.com/4a4PBKwx) and driver (http://pastebin.com/1CsesuVV) It shows up in aplay -l, but trying to play anything to it gives me a div by 0 in a driver: [<c04f27e4>] (Ldiv0) from [<bf50512c>] (fsl_ssi_hw_params+0x194/0x364 [snd_soc_fsl_ssi]) This div0 happens in sound/soc/fsl/fsl_ssi.c, in the function fsl_ssi_set_bclk. My driver file is an almost direct copy of what compulab shipped with a 3.10 kernel. This is my first attempt at kernel hacking, so any help would be appreciated. ~Jonathan Bennett

4 19

[alsa-devel] Trouble about Roland UA-11 UA-33 UA-55 and snd-usb-audio module
by FirebUntU 06 Mar '16

06 Mar '16

Hi guys, I write you about support of snd-usb-audio module and a relatively-new gamma of devices from Roland/Edirol: DUO CAPTURE, TRI CAPTURE and QUAD CAPTURE respectively: UA-11, UA-33, UA-55 These aren't not listed in the Alsa db. I have searched a solution for a week and I haven't found a trick to make UA-11 to work under Alsa 1.25.0 then I downloaded the driver for try to patch it and I found these devices is not listed in the tricks table In despair I have played with the switch button called "EXT * **" in the bottom of the unit of UA-11 and magically the device ID is transformed from * 0582:012b to ** 0582:0137 Image: https://dl.dropbox.com/u/32759898/output.jpg (Rear of the UA-11 unit, from the manual) *Before* (Recognized from udev - Unknown from alsa): http://www.alsa-project.org/db/?f=502ee68cf31882ba9ef23525fd66452c34d329e1 *After* (Recognized from udev - Recognized from alsa): http://www.alsa-project.org/db/?f=b2ae3e4331fb3fe613ba71e7aba1ad2e0e6dcd29 In the tricks table header of ALSA the 0582:0137 stay for PM-1000 in /TODO/ statement. I understand the EXT switch, undiscovered in the manual of the DUO CAPTURE is - as the fact - the Advanced Mode. Now the peripherical running both in playback and recording in 16 and 24 bit and without any mixer options in alsamixer. Can you update future releases with this gamma of devices? Awaiting for your positive response :) Thanks. Best regards, Leonardo

9 16

[alsa-devel] Usb audio - unsuported sampling rates
by Gordon Dilan 12 Feb '16

12 Feb '16

Hello, I'm using an usb mic which(according to it's producer should support up to 48kHz sampling rate). The problem is ALSA allows me to use only 16 kHz for this device. I do not want to resample the data, I want to sample it at 48kHz in order to be able to record some high pitch sounds 18-20kHz. I would want to try to do any modifications necessary in order to try support 48kHz, but I'm not sure where to start. Some information: cat /proc/asound/modules ... 1 snd_usb_audio arecord --list-devices **** List of CAPTURE Hardware Devices **** .... card 1: CameraB409241 [USB Camera-B4.09.24.1], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 when I try to use: arecord -v -D hw:1,0 -f S16_LE -c 4 -r 48000 gigi.wav I get this: Recording WAVE 'gigi.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Warning: rate is not accurate (requested = 48000Hz, got = 16000Hz) please, try the plug plugin Hardware PCM card 1 'USB Camera-B4.09.24.1' device 0 subdevice 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 4 rate : 16000 exact rate : 16000 (16000/1) msbits : 16 buffer_size : 8000 period_size : 2000 period_time : 125000 tstamp_mode : NONE period_step : 1 avail_min : 2000 period_event : 0 start_threshold : 1 stop_threshold : 8000 silence_threshold: 0 silence_size : 0 boundary : 2097152000 appl_ptr : 0 hw_ptr : 0 Any sampling rate I would try higher or lower than 16kHz, I will always get 16000 kHz. Some more information: lsusb Bus 001 Device 007: ID 1415:2000 Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc. Sony Playstation Eye lsusb -t /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/6p, 480M |__ Port 2: Dev 7, If 0, Class=vend., Driver=ov534, 480M |__ Port 2: Dev 7, If 1, Class=audio, Driver=snd-usb-audio, 480M |__ Port 2: Dev 7, If 2, Class=audio, Driver=snd-usb-audio, 480M At the moment I'm looking inside ALSA's source code to try to see from where this limitation of 16000kHz for my device appears, but I have to admit that I'm kind of lost. Any pointers on what direction should I go to try make my desired rate supported would be greatly appreciated! Thank you and best regards, Gordon

3 6

[alsa-devel] [PATCH 0/4] ASoC: fix saif record unwork issue
by Dong Aisheng 16 Jan '16

16 Jan '16

This patch series mainly fixes the saif record unwork issue. The root cause consists of: 1) clk_prepare and clk_enable un-balanced 2) missed setting a proper initial clock rate for saif in dt 3) sgtl5000 dapm widget kcontrol does not work So can not test record on mx28evk. 4) missed setting clkmux mode for saif in dt With this patch series it can fix sgtl5000 widget kcontrol unwork and saif record unwork issue. BTW, just let people konw, i still met a few overruns during record, that's another issue and will be fixed in separte patches later. Patch based on sound-2.6/for-3.6. Dong Aisheng (4): ASoC: mxs-saif: fix clock prepare and enable unbalance issue ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe ARM: mx28evk: add missed clkmux select for saif arch/arm/mach-mxs/mach-mxs.c | 3 +++ sound/soc/codecs/sgtl5000.c | 2 -- sound/soc/mxs/mxs-saif.c | 24 ++++++++++++++++++++++++ 3 files changed, 27 insertions(+), 2 deletions(-)

5 20

[alsa-devel] [PATCH] ARM: sun7i: Fix HDMI Audio driver's Alsa interface and do 8CH IEC60958 output
by thomas schorpp 13 Nov '15

13 Nov '15

Version 0.2 Users doc: All You need to get a HDMI- Pulseaudio Server on Your sunxi board to output Multichannel PCM is this line in default.pa, ttable pcms in asound.conf get ignored: +load-module module-alsa-sink device="hw:1,0" channels=8 channel_map="front-left,front-right,lfe,front-center,rear-left,rear-right,side-left,side-right" ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect Probe with speaker-test, You may need other channel mapping than I. If you run PA in system mode please read the security documentation before, see PA log for link. y tom

2 1

[alsa-devel] Possible GPL-licensed header included in alsa-lib
by Clemens Lang 27 Jul '15

27 Jul '15

Hi, I recently reviewed the alsa-lib 1.0.27.2 source code from a licensing perspective to ensure compliant usage and distribution. It seems the intention is for the libraries to be covered by LGPL. I had a look at include/list.h, which seems to be licensed under GPL-2.0. It does not have a license header or any other copyright information, but it states it was taken from Linux 2.4.0: include/list.h, line 5: | This code was taken from the Linux 2.4.0 kernel. [jaroslav] I'm not sure one could argue that the header was trivial, especially since it does not only contain constants, structures and interface definitions, but also implementations of inline functions. I found one previous inquiry about a similar issue[1], but it does not cover the include/list.h header. Two questions: 1. Have the copyright holders of the code in question agreed to re-license under a different, LGPL-preserving license and, if yes, is there some documentation about that? 2. If the header is indeed covered by GPL-2.0, would you accept patches to replace it with a different implementation, e.g. Rusty Russell's MIT-licensed list from ccan[2]? [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2011-March/038267.html [2] http://ccodearchive.net/info/list.html Thank you for your time, Clemens Lang -- BMW Car IT GmbH Clemens Lang Spezialist Entwicklung Lise-Meitner-Straße 14 89081 Ulm Mail: clemens.lang(a)bmw-carit.de Web: http://www.bmw-carit.de -------------------------------------------------------------------- BMW Car IT GmbH Geschäftsführer: Michael Würtenberger und Reinhard Stolle Sitz und Registergericht: München HRB 134810 --------------------------------------------------------------------

3 12

[alsa-devel] [V2 PATCH] ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Conexant codec
by Hui Wang 01 Jul '15

01 Jul '15

Most Thinkpad Edge series laptops use conexant codec, so far although the codecs have different minor Vendor Id and minor Subsystem Id, they all belong to the cxt5066 family, this change can make the mute/mic-mute LEDs support more generic among cxt_5066 family. This design refers to the similar solution for the realtek codec ALC269 family in the patch_realtek.c. Cc: Alex Hung <alex.hung(a)canonical.com> Cc: David Henningsson <david.henningsson(a)canonical.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_conexant.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index c205bb1..1f2717f 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3244,9 +3244,29 @@ enum { #if IS_ENABLED(CONFIG_THINKPAD_ACPI) #include <linux/thinkpad_acpi.h> +#include <acpi/acpi.h> static int (*led_set_func)(int, bool); +static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context, + void **rv) +{ + bool *found = context; + *found = true; + return AE_OK; +} + +static bool is_thinkpad(struct hda_codec *codec) +{ + bool found = false; + if (codec->subsystem_id >> 16 != 0x17aa) + return false; + if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found) + return true; + found = false; + return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found; +} + static void update_tpacpi_mute_led(void *private_data, int enabled) { struct hda_codec *codec = private_data; @@ -3279,6 +3299,8 @@ static void cxt_fixup_thinkpad_acpi(struct hda_codec *codec, bool removefunc = false; if (action == HDA_FIXUP_ACT_PROBE) { + if (!is_thinkpad(codec)) + return; if (!led_set_func) led_set_func = symbol_request(tpacpi_led_set); if (!led_set_func) { @@ -3494,6 +3516,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI), SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004), SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205), {} -- 1.8.1.2

7 26

[alsa-devel] [ANNOUNCE] Audio Mini Summit 2014, Oct. 14, Düsseldorf, Germany
by Takashi Iwai 24 Apr '15

24 Apr '15

Hi, like previous years, we're going to hold a meeting to discuss lowlevel audio on Linux. This time it's along with Linux Plumbers conference, but for avoiding the conflicts with other LPC mini conferences, it'll be held on Tuesday October 14, at the same venue as LPC, Congress Center Düsseldorf, Germany. If anyone is interested, feel free to sign up in the attendee list below. It's a public accessible Google doc, so you can edit freely. http://goo.gl/VbXLPW (or https://docs.google.com/spreadsheets/d/1wBAiAyZSnMjVFJbxdXE5JoVdKGIBIWt-4tu…) The topics that have been currently raised are found in the URL below. If you have any more topics to discuss there, just put your favorite one in the URL below as well. http://goo.gl/JSasQ9 (or https://docs.google.com/spreadsheets/d/1cXzON65QYNrTXi31AIQHffUZ9NWwJuNEJAC…) Thanks! Takashi

3 2

[alsa-devel] SoundBlaster X-fi HD SPDIF fix
by Richard Körber 05 Apr '15

05 Apr '15

Hi! I own a Creative USB SoundBlaster X-fi HD and tried to use its SPDIF optical output. However it didn't work with ALSA out of the box. The reason is that for SPDIF output device #1 must be used. The fix is: In /usr/share/alsa/cards/USB-Audio.conf, change the iec958_device block like this: USB-Audio.pcm.iec958_device { "USB Sound Blaster HD" 1 } Digital output works fine for me after that. BTW, I tried this line in /etc/asound.conf cards.USB-Audio.pcm.iec958_device."USB Sound Blaster HD" 1 but it didn't have any effect. Why was that? Thank you! Regards Richard Körber

2 8

Re: [alsa-devel] ASoC: Intel: mrfld- add ACPI module
by Dan Carpenter 18 Mar '15

18 Mar '15

Hello Vinod Koul, The patch 336cfbb05edf: "ASoC: Intel: mrfld- add ACPI module" from Nov 11, 2014, leads to the following static checker warning: sound/soc/intel/sst/sst_acpi.c:313 sst_acpi_probe() info: ignoring unreachable code. sound/soc/intel/sst/sst_acpi.c 304 ret = sst_context_init(ctx); 305 if (ret < 0) 306 return ret; 307 308 /* need to save shim registers in BYT */ 309 ctx->shim_regs64 = devm_kzalloc(ctx->dev, sizeof(*ctx->shim_regs64), 310 GFP_KERNEL); 311 if (!ctx->shim_regs64) { 312 return -ENOMEM; ^^^^^^^^^^^^^^^ 313 goto do_sst_cleanup; ^^^^^^^^^^^^^^^^^^^^ 314 } 315 316 sst_configure_runtime_pm(ctx); 317 platform_set_drvdata(pdev, ctx); 318 return ret; 319 320 do_sst_cleanup: 321 sst_context_cleanup(ctx); 322 platform_set_drvdata(pdev, NULL); 323 dev_err(ctx->dev, "failed with %d\n", ret); 324 return ret; 325 } regards, dan carpenter

2 2

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel December 2014