December 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] ASoC Sound Driver I2S over LPE, Intel Baytrail SoC. MinnowBoard Max
by Michael Pogrebinsky 02 Oct '17

02 Oct '17

Hi all, I have the MinnowBoard Max with Baytrail Atom (ValleyView) SoC. I'm attempting to write an Alsa (ASoC) driver for my sound card to work with this board. PCM should work through I2S for this sound card I have. >From my understanding Baytrail's I2S goes over LPE. I read this thread:https://www.mail-archive.com/elinux-minnowboard@lists.elinux.org/msg… So I understand that I need the 3 components for my ASoC driver. However I am having trouble at understanding how to communicate with the LPE to get the I2S working. Here is what I have done so far: I am running Ubuntu 14.04 LTS, kernel : 4.3.0-040300rc4 First of all I downloaded the firmware fw_sst_0f28.bin-48kHz_i2s_master fromhttps://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux… And put it /lib/firmware/intel/. Later I went to the Bios and enabled LPE in PCI mode. I do see the LPE controller now, but it shows as UNCLAIMED. Later I looked at the sound/soc/inte/baytrail/ and from my understanding in order for me to get the I2S working I need to load this module so I did modprobe snd-soc-sst-baytrail-pcm. Later I wrote a simple codec and machine driver (looking at the example of sound/soc/intel/boards/byt_max98090) however everytime I attempt to register the sound card with snd_soc_register_card, I get the following error message in dmesg : "ASoC: CPU DAI baytrail-pcm-audio not registered". >From this I deduct that although I loaded the snd-soc-sst-baytrail-pcm module, the driver has not actually been loaded. I'm clueless on how to proceed from here. I would highly appreciate your help.

3 7

[alsa-devel] [PATCH v2 1/2] ASoC: wm8960: Let wm8960 codec driver manage its own MCLK
by Zidan Wang 04 Apr '17

04 Apr '17

From: Zidan Wang <b50113(a)freescale.com> When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113(a)freescale.com> --- sound/soc/codecs/wm8960.c | 51 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 75cd7de..fd25973 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { + struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); @@ -618,14 +620,38 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - /* Set VMID to 2x50k */ - snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_STANDBY: + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + break; + + default: + break; + } + break; case SND_SOC_BIAS_STANDBY: @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int reg; + int reg, ret; switch (level) { case SND_SOC_BIAS_ON: @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); + + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } break; case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; + wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); + if (IS_ERR(wm8960->mclk)) { + if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); -- 1.9.1

5 10

[alsa-devel] Intel HDA audio on EEE PC 1101HGo
by Enrico Mioso 20 Jan '17

20 Jan '17

Hello guys. I am writing to you all to talk you about a strange behaviour of the Intel HDA Audio device on an EEE PC 1101H. The audio device at some point simply doesn't react to commands, giving in dmesgo utput like this: [22321.638079] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x00170503 [22322.641410] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00170503 This may happen when I boot the system up fresh (here there is no Windows and no hibernation), or when the controller goes to power-save. If I don't set a power save timeout, then the controller will not be recoverable if it gets stuck at boot. As a workaround, I set a very short timeout, so that when the controller fails to start audio, waiting some time and retrying will work. Preliminary infos: Card: HDA Intel MID Chip: Realtek ALC269; Thank you in advance for your help. Please keep me in CC - since I am not subscribed to any list. Enrico Here follows a lspci 00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH Poulsbo) (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f3f80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at c880 [size=8] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M] Region 3: Memory at f3f40000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Vendor Specific Information: Len=07 <?> Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel modules: gma500_gfx 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f3f38000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f0000000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 80000000-801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-fbefffff Prefetchable memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at b880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 (rev 07) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f3f37c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: lpc_sch Kernel modules: lpc_sch 00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller (rev 07) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: pata_sch Kernel modules: pata_sch, pata_acpi, ata_generic 01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0pcilib: sysfs_read_vpd: read failed: Connection timed out 000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0) Subsystem: ASUSTeK Computer Inc. Device 14e5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e880 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4122 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-25-f6-3a-90-e6-ba-ff Kernel driver in use: atl1c Kernel modules: atl1c

3 32

Re: [alsa-devel] Intel Cherry Trail platform sound issue
by Zhihe Tu 05 Nov '16

05 Nov '16

Can anyone give some suggestions? Thanks Tu 发件人: 涂治河 [mailto:tuzhihe@pcasl.com] 发送时间: 2015年11月5日 19:37 收件人: 'alsa-devel(a)alsa-project.org' 主题: Intel Cherry Trail platform sound issue Hi All, I get cherry trail tablet, and install ubuntu14.04.3, Kernel verison is 3.19. The table using rt5672 codec with no sound output in ubuntu, but it works in win8. I get intel sst firmware fw_sst_22a8.bin from https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tr… The driver load the firmware successfully and I change some alsa mixer items: amixer -c0 sset 'codec_out0 mix 0 pcm0_in' on amixer -c0 sset 'media0_out mix 0 media1_in' on amixer -c0 sset 'media1_in Gain 0' 80% amixer -c0 sset 'media1_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'media1_in Gain 0' off amixer -c0 sset 'pcm0_in Gain 0' 80% amixer -c0 sset 'pcm0_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'pcm0_in Gain 0' off amixer -c0 sset 'codec_out0 Gain 0' 80% amixer -c0 sset 'codec_out0 Gain 0 Ramp Delay' 50 amixer -c0 sset 'codec_out0 Gain 0' off But there are some errors with dmesg: [ 16.359646] Audio Port: ASoC: no backend DAIs enabled for Audio Port … [ 16.382156] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp2-port [ 16.383984] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port [ 16.541809] intel_sst_acpi 808622A8:00: Alloc for str 1 pipe 0x90 [ 17.545512] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x2 [ 17.555207] intel_sst_acpi 808622A8:00: fw returned err -16 [ 18.605859] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 18.615908] intel_sst_acpi 808622A8:00: fw returned err -16 [ 19.621943] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 19.631499] intel_sst_acpi 808622A8:00: fw returned err -16 [ 20.637527] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 20.647083] intel_sst_acpi 808622A8:00: fw returned err -16 [ 20.682979] sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp2-port [ 21.681280] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 21.690836] intel_sst_acpi 808622A8:00: fw returned err -16 [ 21.697087] intel_sst_acpi 808622A8:00: free stream returned err -19 [ 22.757082] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 22.766640] intel_sst_acpi 808622A8:00: fw returned err -16 [ 23.772867] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 23.782432] intel_sst_acpi 808622A8:00: fw returned err -16 [ 23.857938] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port [ 23.989254] intel_sst_acpi 808622A8:00: Alloc for str 1 pipe 0x90 [ 23.989491] intel_sst_acpi 808622A8:00: FW sent error response 0x40034 [ 23.996864] intel_sst_acpi 808622A8:00: FW alloc failed ret -4 [ 24.003399] intel_sst_acpi 808622A8:00: sst_get_stream returned err -5 [ 24.010737] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 24.018652] Audio Port: ASoC: prepare FE Audio Port failed [ 25.024622] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 25.034180] intel_sst_acpi 808622A8:00: fw returned err -16 [ 26.040399] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 26.049955] intel_sst_acpi 808622A8:00: fw returned err -16 [ 27.056333] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 27.065890] intel_sst_acpi 808622A8:00: fw returned err -16 [ 28.072032] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 28.081591] intel_sst_acpi 808622A8:00: fw returned err -16 [ 28.117427] Audio Port: sst: error code = -22 [ 28.122401] snd_pcm_update_hw_ptr0: 120 callbacks suppressed [ 28.122409] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.132784] Audio Port: sst: error code = -22 [ 28.137749] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.372967] Audio Port: sst: error code = -22 [ 28.377946] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.388317] Audio Port: sst: error code = -22 [ 28.393289] cht-bsw-rt5672 cht-bsw-rt5672: BUG: , pos = -22, buffer size = 96000, period size = 48000 [ 28.403687] Audio Port: sst: error code = -22 lsmod info: snd_soc_sst_cht_bsw_rt5672 16384 0 snd_intel_sst_acpi 16384 1 snd_intel_sst_core 73728 1 snd_intel_sst_acpi snd_soc_sst_mfld_platform 77824 3 snd_intel_sst_core snd_soc_rt5670 106496 1 snd_soc_rl6231 16384 1 snd_soc_rt5670 snd_soc_core 196608 4 snd_soc_rt5670,snd_soc_sst_cht_bsw_rt5672,snd_soc_sst_mfld_platform snd_seq_midi 16384 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_compress 20480 1 snd_soc_core snd_pcm_dmaengine 16384 1 snd_soc_core snd_rawmidi 32768 1 snd_seq_midi snd_pcm 106496 5 snd_soc_rt5670,snd_soc_core,snd_soc_sst_cht_bsw_rt5672,snd_soc_sst_mfld_platform,snd_pcm_dmaengine snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 32768 2 snd_pcm,snd_seq snd 86016 10 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress soundcore 16384 1 snd I have no idea with the next step, so can anyone give a look? Thanks Tu __________ Information from ESET Smart Security, version of virus signature database 4468 (20090929) __________ The message was checked by ESET Smart Security. http://www.eset.com __________ Information from ESET Smart Security, version of virus signature database 4468 (20090929) __________ The message was checked by ESET Smart Security. http://www.eset.com

2 1

[alsa-devel] [PATCH 0/13] ALSA: Deletion of some unnecessary checks
by SF Markus Elfring 26 Oct '16

26 Oct '16

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Sun, 4 Jan 2015 11:50:12 +0100 Further update suggestions were taken into account after several patches were applied from static source code analysis. Markus Elfring (3): seq: Deletion of unnecessary checks before the function call "snd_midi_event_free" oss: Deletion of unnecessary checks before the function call "vfree" emu10k1: Delete an unnecessary check before the function call "kfree" oxygen: Delete an unnecessary check before the function call "snd_pcm_suspend" emux: Delete an unnecessary check before the function call "snd_sf_free" ASoC: Intel: Delete an unnecessary check before the function call "sst_dma_free" ASoC: fsi: Deletion of unnecessary checks before the function call "clk_enable" ASoC: Intel: Delete an unnecessary check before the function call "release_firmware" i2sbus: Delete an unnecessary check before the function call "snd_pcm_suspend_all" sb: Delete an unnecessary check before the function call "snd_emux_free" Deletion of checks before the function call "iounmap" msnd: One function call less in snd_msnd_attach() after error detection msnd: Fix centralized exiting from snd_msnd_attach() sound/aoa/soundbus/i2sbus/core.c | 13 ++++++------- sound/arm/aaci.c | 4 ++-- sound/drivers/ml403-ac97cr.c | 3 +-- sound/isa/msnd/msnd_pinnacle.c | 31 ++++++++++++++++--------------- sound/parisc/harmony.c | 4 +--- sound/pci/ad1889.c | 5 +---- sound/pci/asihpi/hpioctl.c | 6 ++---- sound/pci/atiixp.c | 3 +-- sound/pci/atiixp_modem.c | 3 +-- sound/pci/aw2/aw2-alsa.c | 4 +--- sound/pci/bt87x.c | 3 +-- sound/pci/cs4281.c | 6 ++---- sound/pci/cs46xx/cs46xx_lib.c | 4 ++-- sound/pci/ctxfi/cthw20k1.c | 5 +---- sound/pci/ctxfi/cthw20k2.c | 5 +---- sound/pci/echoaudio/echoaudio.c | 6 +----- sound/pci/hda/hda_intel.c | 3 +-- sound/pci/lola/lola.c | 6 ++---- sound/pci/mixart/mixart.c | 7 +++---- sound/pci/nm256/nm256.c | 6 ++---- sound/pci/rme9652/hdsp.c | 4 +--- sound/pci/rme9652/hdspm.c | 4 +--- sound/pci/rme9652/rme9652.c | 3 +-- sound/pci/sis7019.c | 5 +---- sound/pci/ymfpci/ymfpci_main.c | 3 +-- sound/ppc/pmac.c | 15 +++++---------- 26 files changed, 58 insertions(+), 103 deletions(-) -- 2.2.1

5 25

[alsa-devel] [PATCH] ASoC: topology: Reenable use from userspace
by Mark Brown 11 Oct '16

11 Oct '16

We had inserted a #error into the topology UAPI code to ensure that the ABI was not adopted by userspace while final review and testing was ongoing. Since we are now comfortable that the ABI is suitable for production remove the #error, future changes will include provision for backwards compatibility. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Are we OK with this? Looking for some acks and reviews... include/uapi/sound/asoc.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 247c50b..51b8066 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -18,12 +18,6 @@ #include <linux/types.h> #include <sound/asound.h> -#ifndef __KERNEL__ -#error This API is an early revision and not enabled in the current -#error kernel release, it will be enabled in a future kernel version -#error with incompatible changes to what is here. -#endif - /* * Maximum number of channels topology kcontrol can represent. */ -- 2.6.1

4 6

[alsa-devel] [PATCH RFC 0/6] ASoC: sgtl5000: fix use of regulators and internal LDO
by Eric Nelson 15 Jun '16

15 Jun '16

This patch set addresses a structural problem in the handling of regulators for VDDIO, VDDA, and VDDD in the SGTL5000 driver. The first two of these power rails must be powered on prior to any I2C communication, and yet the regulators were tied to the codec, which is instantiated only after a fair amount of I2C communication takes place. In other words, these regulators could never have function, and we can surmise that no user of this driver has switched power supply rails connected to them. The third power rail (VDDD) can be derived internally (by using I2C registers) though the data sheet says that if an external VDDD is used, it should be enabled before MCLK is started and I2C activity begins. Patch 1 moves the regulators to the I2C device and initializes them before I2C activity. Patch 2 addresses an issue found during development of the patch and is somewhat unrelated to regulators. It is included for discussion Patch 3 removes the root cause of patch 2 Patch 4 adds return value checks when setting the LINREG and ANA_POWER registers Patch 5 addresses the cause of follow-on failures and the source of the error in patch 3. Patch 6 removes the naive use of the supplies to lower power consumption and replaces it with something more modest. The patch set is being sent as an RFC for discussion, and should probably be squashed into two or three patches covering the regulator updates (patches 1, 3-5 and perhaps 6), initialization error handling (patch 2). Eric Nelson (6): ASoC: sgtl5000: fix regulator support ASoC: sgtl5000: write all default registers ASoC: sgtl5000: initialize CHIP_ANA_POWER to power-on defaults ASoC: sgtl5000: check return values ASoC: sgtl5000: disable internal PLL early ASoC: sgtl5000: Don't disable regulators in SND_SOC_BIAS_OFF sound/soc/codecs/sgtl5000.c | 417 +++++++++++--------------------------------- sound/soc/codecs/sgtl5000.h | 2 + 2 files changed, 102 insertions(+), 317 deletions(-) -- 1.9.1

3 28