May 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] [PATCH v2 1/2] ASoC: wm8960: Let wm8960 codec driver manage its own MCLK
by Zidan Wang 04 Apr '17

04 Apr '17

From: Zidan Wang <b50113(a)freescale.com> When we want to use wm8960 codec, we should enable its MCLK in machine driver. It's reasonable for wm8960 codec driver to manage its own MCLK. When current bias_level is SND_SOC_BIAS_ON, it is preparing for a transition away from ON. In this case, disable the codec mclk. When current bias_level is not SND_SOC_BIAS_ON, it preparing for a transition to ON. In this case, enable the codec mclk. Signed-off-by: Zidan Wang <b50113(a)freescale.com> --- sound/soc/codecs/wm8960.c | 51 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 75cd7de..fd25973 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/clk.h> #include <linux/i2c.h> #include <linux/slab.h> #include <sound/core.h> @@ -117,6 +118,7 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg) } struct wm8960_priv { + struct clk *mclk; struct regmap *regmap; int (*set_bias_level)(struct snd_soc_codec *, enum snd_soc_bias_level level); @@ -618,14 +620,38 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int ret; switch (level) { case SND_SOC_BIAS_ON: break; case SND_SOC_BIAS_PREPARE: - /* Set VMID to 2x50k */ - snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + switch (codec->dapm.bias_level) { + case SND_SOC_BIAS_STANDBY: + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } + + /* Set VMID to 2x50k */ + snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); + break; + + case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + break; + + default: + break; + } + break; case SND_SOC_BIAS_STANDBY: @@ -674,7 +700,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); - int reg; + int reg, ret; switch (level) { case SND_SOC_BIAS_ON: @@ -715,9 +741,22 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, WM8960_VREF, WM8960_VREF); msleep(100); + + if (!IS_ERR(wm8960->mclk)) { + ret = clk_prepare_enable(wm8960->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable MCLK: %d\n", + ret); + return ret; + } + } break; case SND_SOC_BIAS_ON: + if (!IS_ERR(wm8960->mclk)) + clk_disable_unprepare(wm8960->mclk); + /* Enable anti-pop mode */ snd_soc_update_bits(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | @@ -1002,6 +1041,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, if (wm8960 == NULL) return -ENOMEM; + wm8960->mclk = devm_clk_get(&i2c->dev, "mclk"); + if (IS_ERR(wm8960->mclk)) { + if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap); if (IS_ERR(wm8960->regmap)) return PTR_ERR(wm8960->regmap); -- 1.9.1

5 10

[alsa-devel] Intel HDA audio on EEE PC 1101HGo
by Enrico Mioso 20 Jan '17

20 Jan '17

Hello guys. I am writing to you all to talk you about a strange behaviour of the Intel HDA Audio device on an EEE PC 1101H. The audio device at some point simply doesn't react to commands, giving in dmesgo utput like this: [22321.638079] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x00170503 [22322.641410] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00170503 This may happen when I boot the system up fresh (here there is no Windows and no hibernation), or when the controller goes to power-save. If I don't set a power save timeout, then the controller will not be recoverable if it gets stuck at boot. As a workaround, I set a very short timeout, so that when the controller fails to start audio, waiting some time and retrying will work. Preliminary infos: Card: HDA Intel MID Chip: Realtek ALC269; Thank you in advance for your help. Please keep me in CC - since I am not subscribed to any list. Enrico Here follows a lspci 00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH Poulsbo) (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f3f80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at c880 [size=8] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M] Region 3: Memory at f3f40000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Vendor Specific Information: Len=07 <?> Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel modules: gma500_gfx 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f3f38000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f0000000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 80000000-801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-fbefffff Prefetchable memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM+ Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ce Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at b880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 (rev 07) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 (rev 07) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f3f37c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge (rev 07) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: lpc_sch Kernel modules: lpc_sch 00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller (rev 07) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 83ce Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: pata_sch Kernel modules: pata_sch, pata_acpi, ata_generic 01:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0pcilib: sysfs_read_vpd: read failed: Connection timed out 000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0) Subsystem: ASUSTeK Computer Inc. Device 14e5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e880 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4122 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Vital Product Data Not readable Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [180 v1] Device Serial Number ff-25-f6-3a-90-e6-ba-ff Kernel driver in use: atl1c Kernel modules: atl1c

3 32

[alsa-devel] [PATCH 0/13] ALSA: Deletion of some unnecessary checks
by SF Markus Elfring 26 Oct '16

26 Oct '16

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Sun, 4 Jan 2015 11:50:12 +0100 Further update suggestions were taken into account after several patches were applied from static source code analysis. Markus Elfring (3): seq: Deletion of unnecessary checks before the function call "snd_midi_event_free" oss: Deletion of unnecessary checks before the function call "vfree" emu10k1: Delete an unnecessary check before the function call "kfree" oxygen: Delete an unnecessary check before the function call "snd_pcm_suspend" emux: Delete an unnecessary check before the function call "snd_sf_free" ASoC: Intel: Delete an unnecessary check before the function call "sst_dma_free" ASoC: fsi: Deletion of unnecessary checks before the function call "clk_enable" ASoC: Intel: Delete an unnecessary check before the function call "release_firmware" i2sbus: Delete an unnecessary check before the function call "snd_pcm_suspend_all" sb: Delete an unnecessary check before the function call "snd_emux_free" Deletion of checks before the function call "iounmap" msnd: One function call less in snd_msnd_attach() after error detection msnd: Fix centralized exiting from snd_msnd_attach() sound/aoa/soundbus/i2sbus/core.c | 13 ++++++------- sound/arm/aaci.c | 4 ++-- sound/drivers/ml403-ac97cr.c | 3 +-- sound/isa/msnd/msnd_pinnacle.c | 31 ++++++++++++++++--------------- sound/parisc/harmony.c | 4 +--- sound/pci/ad1889.c | 5 +---- sound/pci/asihpi/hpioctl.c | 6 ++---- sound/pci/atiixp.c | 3 +-- sound/pci/atiixp_modem.c | 3 +-- sound/pci/aw2/aw2-alsa.c | 4 +--- sound/pci/bt87x.c | 3 +-- sound/pci/cs4281.c | 6 ++---- sound/pci/cs46xx/cs46xx_lib.c | 4 ++-- sound/pci/ctxfi/cthw20k1.c | 5 +---- sound/pci/ctxfi/cthw20k2.c | 5 +---- sound/pci/echoaudio/echoaudio.c | 6 +----- sound/pci/hda/hda_intel.c | 3 +-- sound/pci/lola/lola.c | 6 ++---- sound/pci/mixart/mixart.c | 7 +++---- sound/pci/nm256/nm256.c | 6 ++---- sound/pci/rme9652/hdsp.c | 4 +--- sound/pci/rme9652/hdspm.c | 4 +--- sound/pci/rme9652/rme9652.c | 3 +-- sound/pci/sis7019.c | 5 +---- sound/pci/ymfpci/ymfpci_main.c | 3 +-- sound/ppc/pmac.c | 15 +++++---------- 26 files changed, 58 insertions(+), 103 deletions(-) -- 2.2.1

5 25

[alsa-devel] [PATCH RFC 0/6] ASoC: sgtl5000: fix use of regulators and internal LDO
by Eric Nelson 15 Jun '16

15 Jun '16

This patch set addresses a structural problem in the handling of regulators for VDDIO, VDDA, and VDDD in the SGTL5000 driver. The first two of these power rails must be powered on prior to any I2C communication, and yet the regulators were tied to the codec, which is instantiated only after a fair amount of I2C communication takes place. In other words, these regulators could never have function, and we can surmise that no user of this driver has switched power supply rails connected to them. The third power rail (VDDD) can be derived internally (by using I2C registers) though the data sheet says that if an external VDDD is used, it should be enabled before MCLK is started and I2C activity begins. Patch 1 moves the regulators to the I2C device and initializes them before I2C activity. Patch 2 addresses an issue found during development of the patch and is somewhat unrelated to regulators. It is included for discussion Patch 3 removes the root cause of patch 2 Patch 4 adds return value checks when setting the LINREG and ANA_POWER registers Patch 5 addresses the cause of follow-on failures and the source of the error in patch 3. Patch 6 removes the naive use of the supplies to lower power consumption and replaces it with something more modest. The patch set is being sent as an RFC for discussion, and should probably be squashed into two or three patches covering the regulator updates (patches 1, 3-5 and perhaps 6), initialization error handling (patch 2). Eric Nelson (6): ASoC: sgtl5000: fix regulator support ASoC: sgtl5000: write all default registers ASoC: sgtl5000: initialize CHIP_ANA_POWER to power-on defaults ASoC: sgtl5000: check return values ASoC: sgtl5000: disable internal PLL early ASoC: sgtl5000: Don't disable regulators in SND_SOC_BIAS_OFF sound/soc/codecs/sgtl5000.c | 417 +++++++++++--------------------------------- sound/soc/codecs/sgtl5000.h | 2 + 2 files changed, 102 insertions(+), 317 deletions(-) -- 1.9.1

3 28

[alsa-devel] Help with wm8731 support for the Utilite (imx6q)
by Jonathan Bennett 06 Apr '16

06 Apr '16

Hey, I'm working with a compulab utilite, trying to get everything working with 3.17, with the eventual goal of getting better support for it upstream. Currently fighting the sound. It's a imx6q talking to a wm8731 over i2c/i2s. I am booting Fedora 21 arm Alpha, with my own dtb ( http://pastebin.com/4a4PBKwx) and driver (http://pastebin.com/1CsesuVV) It shows up in aplay -l, but trying to play anything to it gives me a div by 0 in a driver: [<c04f27e4>] (Ldiv0) from [<bf50512c>] (fsl_ssi_hw_params+0x194/0x364 [snd_soc_fsl_ssi]) This div0 happens in sound/soc/fsl/fsl_ssi.c, in the function fsl_ssi_set_bclk. My driver file is an almost direct copy of what compulab shipped with a 3.10 kernel. This is my first attempt at kernel hacking, so any help would be appreciated. ~Jonathan Bennett

4 19

[alsa-devel] Trouble about Roland UA-11 UA-33 UA-55 and snd-usb-audio module
by FirebUntU 07 Mar '16

07 Mar '16

Hi guys, I write you about support of snd-usb-audio module and a relatively-new gamma of devices from Roland/Edirol: DUO CAPTURE, TRI CAPTURE and QUAD CAPTURE respectively: UA-11, UA-33, UA-55 These aren't not listed in the Alsa db. I have searched a solution for a week and I haven't found a trick to make UA-11 to work under Alsa 1.25.0 then I downloaded the driver for try to patch it and I found these devices is not listed in the tricks table In despair I have played with the switch button called "EXT * **" in the bottom of the unit of UA-11 and magically the device ID is transformed from * 0582:012b to ** 0582:0137 Image: https://dl.dropbox.com/u/32759898/output.jpg (Rear of the UA-11 unit, from the manual) *Before* (Recognized from udev - Unknown from alsa): http://www.alsa-project.org/db/?f=502ee68cf31882ba9ef23525fd66452c34d329e1 *After* (Recognized from udev - Recognized from alsa): http://www.alsa-project.org/db/?f=b2ae3e4331fb3fe613ba71e7aba1ad2e0e6dcd29 In the tricks table header of ALSA the 0582:0137 stay for PM-1000 in /TODO/ statement. I understand the EXT switch, undiscovered in the manual of the DUO CAPTURE is - as the fact - the Advanced Mode. Now the peripherical running both in playback and recording in 16 and 24 bit and without any mixer options in alsamixer. Can you update future releases with this gamma of devices? Awaiting for your positive response :) Thanks. Best regards, Leonardo

9 16

[alsa-devel] writing an alsa driver
by Michele Curti 04 Mar '16

04 Mar '16

Hi all, I'm going to *try* to "write" a driver for the sound card on my new laptop, an asus x205ta. To be fair I have almost no experience but I'm hoping that all the code is already present and it only needs some adaptations. The cpu is a intel bay trail z3735f, the sound card is a realtek rt5648 that has the same product Id of the rt5645 (0x6308). I see in kernel sources: - the codec driver sound/soc/codecs/rt5645.c - a baytrail board that uses the rt5640 sound/soc/intel/boards/byt-rt5640.c - a braswell board that uses the rt5645 sound/soc/intel/boards/cht_bsw_rt5645.c What do you think? Is it feasible, given a good amount of free-time? :p Thanks, Michele

10 46