- Alsa-devel - mailman.alsa-project.org

[PATCH 1/7] dt-bindings: soundwire: qcom: add 16-bit sample interval
by Krzysztof Kozlowski 31 Mar '23

31 Mar '23

The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../bindings/soundwire/qcom,soundwire.yaml | 22 +++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 3efdc192ab01..e2acfd09fb22 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -85,7 +85,7 @@ properties: qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Sample interval low of each data port. + Sample interval (only lowest byte) of each data port. Out ports followed by In ports. Used for Sample Interval calculation. Value of 0xff indicates that this option is not implemented or applicable for the respective data port. @@ -93,6 +93,19 @@ properties: minItems: 3 maxItems: 8 + qcom,ports-sinterval: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Sample interval of each data port. + Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xffff indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + items: + maximum: 0xffff + qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -218,10 +231,15 @@ required: - '#size-cells' - qcom,dout-ports - qcom,din-ports - - qcom,ports-sinterval-low - qcom,ports-offset1 - qcom,ports-offset2 +oneOf: + - required: + - qcom,ports-sinterval + - required: + - qcom,ports-sinterval-low + additionalProperties: false examples: -- 2.34.1

1 6

[PATCH] ASoC: amd: ps: update the acp clock source.
by Syed Saba Kareem 31 Mar '23

31 Mar '23

Updating the clock source from ACLK to default clock Signed-off-by: Syed Saba Kareem <Syed.SabaKareem(a)amd.com> --- sound/soc/amd/ps/pci-ps.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index e86f23d97584..688a1d4643d9 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -91,7 +91,6 @@ static int acp63_init(void __iomem *acp_base, struct device *dev) dev_err(dev, "ACP reset failed\n"); return ret; } - acp63_writel(0x03, acp_base + ACP_CLKMUX_SEL); acp63_enable_interrupts(acp_base); return 0; } @@ -106,7 +105,6 @@ static int acp63_deinit(void __iomem *acp_base, struct device *dev) dev_err(dev, "ACP reset failed\n"); return ret; } - acp63_writel(0, acp_base + ACP_CLKMUX_SEL); acp63_writel(0, acp_base + ACP_CONTROL); return 0; } -- 2.25.1

2 1

Most likely this is a bug in the ALSA driver 'snd_hda_intel'
by GitHub issues - opened 31 Mar '23

31 Mar '23

alsa-project/alsa-lib issue #310 was opened from zozo30: márc 31 16:49:45 surface pulseaudio[1449]: snd_pcm_avail() returned a value that is exceptionally large: 153216 bytes (798 ms). márc 31 16:49:45 surface pulseaudio[1449]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. márc 31 16:50:09 surface kernel: pulseaudio invoked oom-killer: gfp_mask=0x1100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 márc 31 16:50:09 surface kernel: CPU: 6 PID: 1449 Comm: pulseaudio Tainted: G OE 5.15.0-69-generic #76~20.04.1-Ubuntu márc 31 16:50:09 surface kernel: Hardware name: Microsoft Corporation Surface Laptop Go/Surface Laptop Go, BIOS 13.102.140 02/04/2022 márc 31 16:50:09 surface kernel: Call Trace: márc 31 16:50:09 surface kernel: <TASK> márc 31 16:50:09 surface kernel: dump_stack_lvl+0x4a/0x63 márc 31 16:50:09 surface kernel: dump_stack+0x10/0x16 márc 31 16:50:09 surface kernel: dump_header+0x53/0x225 márc 31 16:50:09 surface kernel: oom_kill_process.cold+0xb/0x10 márc 31 16:50:09 surface kernel: out_of_memory+0x1dc/0x530 márc 31 16:50:09 surface kernel: __alloc_pages_slowpath.constprop.0+0xd32/0xe30 márc 31 16:50:09 surface kernel: ? __alloc_pages_slowpath.constprop.0+0xdb6/0xe30 márc 31 16:50:09 surface kernel: __alloc_pages+0x2cc/0x310 márc 31 16:50:09 surface kernel: alloc_pages+0x90/0x120 márc 31 16:50:09 surface kernel: __page_cache_alloc+0x87/0xc0 márc 31 16:50:09 surface kernel: pagecache_get_page+0x150/0x530 márc 31 16:50:09 surface kernel: ? page_cache_ra_unbounded+0x16a/0x220 márc 31 16:50:09 surface kernel: filemap_fault+0x527/0xb60 márc 31 16:50:09 surface kernel: ? filemap_map_pages+0x138/0x640 márc 31 16:50:09 surface kernel: __do_fault+0x3d/0x120 márc 31 16:50:09 surface kernel: do_fault+0x1f9/0x420 márc 31 16:50:09 surface kernel: __handle_mm_fault+0x62c/0x840 márc 31 16:50:09 surface kernel: handle_mm_fault+0xd8/0x2c0 márc 31 16:50:09 surface kernel: do_user_addr_fault+0x1c2/0x660 márc 31 16:50:09 surface kernel: exc_page_fault+0x77/0x170 márc 31 16:50:09 surface kernel: asm_exc_page_fault+0x27/0x30 márc 31 16:50:09 surface kernel: RIP: 0033:0x7f2eaaa006e0 márc 31 16:50:09 surface kernel: Code: Unable to access opcode bytes at RIP 0x7f2eaaa006b6. márc 31 16:50:09 surface kernel: RSP: 002b:00007fff4da75e58 EFLAGS: 00010206 márc 31 16:50:09 surface kernel: RAX: 0000000000000180 RBX: 0000000000000014 RCX: 0000000000007fc8 márc 31 16:50:09 surface kernel: RDX: 0000000000000014 RSI: 00007f2e44007383 RDI: 0000557a946844c8 márc 31 16:50:09 surface kernel: RBP: 0000557a9442fdd0 R08: 00000000000000f6 R09: 00007fff4db96080 márc 31 16:50:09 surface kernel: R10: 0000000000000f60 R11: 0000000000000000 R12: 0000000000000000 márc 31 16:50:09 surface kernel: R13: 0000000000000014 R14: 0000000000000014 R15: 0000557a946844c8 márc 31 16:50:09 surface kernel: </TASK> márc 31 16:50:09 surface kernel: Mem-Info: márc 31 16:50:09 surface kernel: active_anon:434847 inactive_anon:1303910 isolated_anon:0 active_file:274 inactive_file:139 isolated_file:0 unevictable:46304 dirty:0 writeback:0 slab_reclaimable:24619 slab_unreclaimable:38963 mapped:13059 shmem:234049 pagetables:24921 bounce:0 kernel_misc_reclaimable:0 free:25965 free_pcp:2513 free_cma:0 márc 31 16:50:09 surface kernel: Node 0 active_anon:1739388kB inactive_anon:5215640kB active_file:1096kB inactive_file:556kB unevictable:185216kB isolated(anon):0kB isolated(file):0kB mappe> márc 31 16:50:09 surface kernel: Node 0 DMA free:14340kB min:136kB low:168kB high:200kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictab> márc 31 16:50:09 surface kernel: lowmem_reserve[]: 0 1777 7398 7398 7398 márc 31 16:50:09 surface kernel: Node 0 DMA32 free:38460kB min:16204kB low:20252kB high:24300kB reserved_highatomic:0KB active_anon:470704kB inactive_anon:1304732kB active_file:120kB inacti> márc 31 16:50:09 surface kernel: lowmem_reserve[]: 0 0 5621 5621 5621 márc 31 16:50:09 surface kernel: Node 0 Normal free:51060kB min:51240kB low:64048kB high:76856kB reserved_highatomic:2048KB active_anon:1268684kB inactive_anon:3910908kB active_file:1652kB > márc 31 16:50:09 surface kernel: lowmem_reserve[]: 0 0 0 0 0 márc 31 16:50:09 surface kernel: Node 0 DMA: 1*4kB (U) 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB (M) 3*4096kB (M) = 14340kB márc 31 16:50:09 surface kernel: Node 0 DMA32: 627*4kB (UME) 351*8kB (UME) 287*16kB (UME) 231*32kB (UME) 89*64kB (UME) 49*128kB (UME) 18*256kB (UME) 8*512kB (ME) 0*1024kB 0*2048kB 0*4096kB > márc 31 16:50:09 surface kernel: Node 0 Normal: 2543*4kB (UMEH) 2132*8kB (UMEH) 505*16kB (UMEH) 283*32kB (UMEH) 131*64kB (UMEH) 1*128kB (M) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 5287> márc 31 16:50:09 surface kernel: Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB márc 31 16:50:09 surface kernel: Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB márc 31 16:50:09 surface kernel: 248238 total pagecache pages márc 31 16:50:09 surface kernel: 13889 pages in swap cache márc 31 16:50:09 surface kernel: Swap cache stats: add 1758716, delete 1745144, find 269293/452373 márc 31 16:50:09 surface kernel: Free swap = 0kB márc 31 16:50:09 surface kernel: Total swap = 2097148kB márc 31 16:50:09 surface kernel: 1991213 pages RAM márc 31 16:50:09 surface kernel: 0 pages HighMem/MovableOnly márc 31 16:50:09 surface kernel: 61186 pages reserved márc 31 16:50:09 surface kernel: 0 pages hwpoisoned márc 31 16:50:09 surface kernel: Out of memory: Killed process 59760 (Isolated Web Co) total-vm:3106248kB, anon-rss:351544kB, file-rss:0kB, shmem-rss:2112kB, UID:1000 pgtables:3236kB oom_sc> márc 31 16:49:45 surface pulseaudio[1449]: snd_pcm_dump(): márc 31 16:49:45 surface pulseaudio[1449]: Soft volume PCM márc 31 16:49:45 surface pulseaudio[1449]: Control: PCM Playback Volume márc 31 16:49:45 surface pulseaudio[1449]: min_dB: -51 márc 31 16:49:45 surface pulseaudio[1449]: max_dB: 0 márc 31 16:49:45 surface pulseaudio[1449]: resolution: 256 márc 31 16:49:45 surface pulseaudio[1449]: Its setup is: márc 31 16:49:45 surface pulseaudio[1449]: stream : PLAYBACK márc 31 16:49:45 surface pulseaudio[1449]: access : MMAP_INTERLEAVED márc 31 16:49:45 surface pulseaudio[1449]: format : S16_LE márc 31 16:49:45 surface pulseaudio[1449]: subformat : STD márc 31 16:49:45 surface pulseaudio[1449]: channels : 2 márc 31 16:49:45 surface pulseaudio[1449]: rate : 48000 márc 31 16:49:45 surface pulseaudio[1449]: exact rate : 48000 (48000/1) márc 31 16:49:45 surface pulseaudio[1449]: msbits : 16 márc 31 16:49:45 surface pulseaudio[1449]: buffer_size : 4408 márc 31 16:49:45 surface pulseaudio[1449]: period_size : 1102 márc 31 16:49:45 surface pulseaudio[1449]: period_time : 22958 márc 31 16:49:45 surface pulseaudio[1449]: tstamp_mode : ENABLE márc 31 16:49:45 surface pulseaudio[1449]: tstamp_type : MONOTONIC márc 31 16:49:45 surface pulseaudio[1449]: period_step : 1 márc 31 16:49:45 surface pulseaudio[1449]: avail_min : 1102 márc 31 16:49:45 surface pulseaudio[1449]: period_event : 1 márc 31 16:49:45 surface pulseaudio[1449]: start_threshold : -1 márc 31 16:49:45 surface pulseaudio[1449]: stop_threshold : 4962966789362286592 márc 31 16:49:45 surface pulseaudio[1449]: silence_threshold: 0 márc 31 16:49:45 surface pulseaudio[1449]: silence_size : 0 márc 31 16:49:45 surface pulseaudio[1449]: boundary : 4962966789362286592 márc 31 16:49:45 surface pulseaudio[1449]: Slave: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0 márc 31 16:49:45 surface pulseaudio[1449]: Its setup is: márc 31 16:49:45 surface pulseaudio[1449]: stream : PLAYBACK márc 31 16:49:45 surface pulseaudio[1449]: access : MMAP_INTERLEAVED márc 31 16:49:45 surface pulseaudio[1449]: format : S16_LE márc 31 16:49:45 surface pulseaudio[1449]: subformat : STD márc 31 16:49:45 surface pulseaudio[1449]: channels : 2 márc 31 16:49:45 surface pulseaudio[1449]: rate : 48000 márc 31 16:49:45 surface pulseaudio[1449]: exact rate : 48000 (48000/1) márc 31 16:49:45 surface pulseaudio[1449]: msbits : 16 márc 31 16:49:45 surface pulseaudio[1449]: buffer_size : 4408 márc 31 16:49:45 surface pulseaudio[1449]: period_size : 1102 márc 31 16:49:45 surface pulseaudio[1449]: period_time : 22958 márc 31 16:49:45 surface pulseaudio[1449]: tstamp_mode : ENABLE márc 31 16:49:45 surface pulseaudio[1449]: tstamp_type : MONOTONIC márc 31 16:49:45 surface pulseaudio[1449]: period_step : 1 márc 31 16:49:45 surface pulseaudio[1449]: avail_min : 1102 márc 31 16:49:45 surface pulseaudio[1449]: period_event : 1 márc 31 16:49:45 surface pulseaudio[1449]: start_threshold : -1 márc 31 16:49:45 surface pulseaudio[1449]: stop_threshold : 4962966789362286592 márc 31 16:49:45 surface pulseaudio[1449]: silence_threshold: 0 márc 31 16:49:45 surface pulseaudio[1449]: silence_size : 0 márc 31 16:49:45 surface pulseaudio[1449]: boundary : 4962966789362286592 márc 31 16:49:45 surface pulseaudio[1449]: appl_ptr : 1271811640 márc 31 16:49:45 surface pulseaudio[1449]: hw_ptr : 1271845784 márc 31 16:49:56 surface pulseaudio[1449]: snd_pcm_delay() returned a value that is exceptionally large: -93928 bytes (-489 ms). márc 31 16:49:56 surface pulseaudio[1449]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. márc 31 16:49:56 surface pulseaudio[1449]: snd_pcm_dump(): márc 31 16:49:56 surface pulseaudio[1449]: Soft volume PCM márc 31 16:49:56 surface pulseaudio[1449]: Control: PCM Playback Volume márc 31 16:49:56 surface pulseaudio[1449]: min_dB: -51 márc 31 16:49:56 surface pulseaudio[1449]: max_dB: 0 márc 31 16:49:56 surface pulseaudio[1449]: resolution: 256 márc 31 16:49:56 surface pulseaudio[1449]: Its setup is: márc 31 16:49:56 surface pulseaudio[1449]: stream : PLAYBACK márc 31 16:49:56 surface pulseaudio[1449]: access : MMAP_INTERLEAVED márc 31 16:49:56 surface pulseaudio[1449]: format : S16_LE márc 31 16:49:56 surface pulseaudio[1449]: subformat : STD márc 31 16:49:56 surface pulseaudio[1449]: channels : 2 márc 31 16:49:56 surface pulseaudio[1449]: rate : 48000 márc 31 16:49:56 surface pulseaudio[1449]: exact rate : 48000 (48000/1) márc 31 16:49:56 surface pulseaudio[1449]: msbits : 16 márc 31 16:49:56 surface pulseaudio[1449]: buffer_size : 4408 márc 31 16:49:56 surface pulseaudio[1449]: period_size : 1102 márc 31 16:49:56 surface pulseaudio[1449]: period_time : 22958 márc 31 16:49:56 surface pulseaudio[1449]: tstamp_mode : ENABLE márc 31 16:49:56 surface pulseaudio[1449]: tstamp_type : MONOTONIC márc 31 16:49:56 surface pulseaudio[1449]: period_step : 1 márc 31 16:49:56 surface pulseaudio[1449]: avail_min : 1102 márc 31 16:49:56 surface pulseaudio[1449]: period_event : 1 márc 31 16:49:56 surface pulseaudio[1449]: start_threshold : -1 márc 31 16:49:56 surface pulseaudio[1449]: stop_threshold : 4962966789362286592 márc 31 16:49:56 surface pulseaudio[1449]: silence_threshold: 0 márc 31 16:49:56 surface pulseaudio[1449]: silence_size : 0 márc 31 16:49:56 surface pulseaudio[1449]: boundary : 4962966789362286592 márc 31 16:49:56 surface pulseaudio[1449]: Slave: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0 márc 31 16:49:56 surface pulseaudio[1449]: Its setup is: márc 31 16:49:56 surface pulseaudio[1449]: stream : PLAYBACK márc 31 16:49:56 surface pulseaudio[1449]: access : MMAP_INTERLEAVED márc 31 16:49:56 surface pulseaudio[1449]: format : S16_LE márc 31 16:49:56 surface pulseaudio[1449]: subformat : STD márc 31 16:49:56 surface pulseaudio[1449]: channels : 2 márc 31 16:49:56 surface pulseaudio[1449]: rate : 48000 márc 31 16:49:56 surface pulseaudio[1449]: exact rate : 48000 (48000/1) márc 31 16:49:56 surface pulseaudio[1449]: msbits : 16 márc 31 16:49:56 surface pulseaudio[1449]: buffer_size : 4408 márc 31 16:49:56 surface pulseaudio[1449]: period_size : 1102 márc 31 16:49:56 surface pulseaudio[1449]: period_time : 22958 márc 31 16:49:56 surface pulseaudio[1449]: tstamp_mode : ENABLE márc 31 16:49:56 surface pulseaudio[1449]: tstamp_type : MONOTONIC márc 31 16:49:56 surface pulseaudio[1449]: period_step : 1 márc 31 16:49:56 surface pulseaudio[1449]: avail_min : 1102 márc 31 16:49:56 surface pulseaudio[1449]: period_event : 1 márc 31 16:49:56 surface pulseaudio[1449]: start_threshold : -1 márc 31 16:49:56 surface pulseaudio[1449]: stop_threshold : 4962966789362286592 márc 31 16:49:56 surface pulseaudio[1449]: silence_threshold: 0 márc 31 16:49:56 surface pulseaudio[1449]: silence_size : 0 márc 31 16:49:56 surface pulseaudio[1449]: boundary : 4962966789362286592 márc 31 16:49:56 surface pulseaudio[1449]: appl_ptr : 1272320744 márc 31 16:49:56 surface pulseaudio[1449]: hw_ptr : 1272344272 Issue URL : https://github.com/alsa-project/alsa-lib/issues/310 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH V4 1/2] ASoC: max98363: add soundwire amplifier driver
by “Ryan 31 Mar '23

31 Mar '23

From: Ryan Lee <ryans.lee(a)analog.com> Added Analog Devices MAX98363 SoundWire Amplifier Driver. The MAX98363 is a SoundWire peripheral device that supports MIPI SoundWire v1.2-compatible digital interface for audio and control data. Signed-off-by: Ryan Lee <ryans.lee(a)analog.com> --- Changes from v1: Removed the standard SoundWire registers from the amp register table. Removed .of_match_table and .acpi_match_table. Removed vdd/dvddio control. Removed unnecessary source port control in .read_prop. Removed legacy from I2S driver not used for SoundWire driver. Removed .shutdown, .bus_config, and unused functions. Sorted include files in alphabetical order. Changes from v2: Changed .channels_max from 2 to 1. stream_config.ch_count is limited to .channels_max. Removed unused variables. rx_mask and slot from max98363_priv. Changes from v3: No change sound/soc/codecs/Kconfig | 11 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98363.c | 464 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98363.h | 36 +++ 4 files changed, 513 insertions(+) create mode 100644 sound/soc/codecs/max98363.c create mode 100644 sound/soc/codecs/max98363.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 03630d13d35f..4062fe3fbb1c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -133,6 +133,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98925 imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 + imply SND_SOC_MAX98363 imply SND_SOC_MAX98373_I2C imply SND_SOC_MAX98373_SDW imply SND_SOC_MAX98390 @@ -1133,6 +1134,16 @@ config SND_SOC_MAX98520 To compile this driver as a module, choose M here. +config SND_SOC_MAX98363 + tristate "Analog Devices MAX98363 Soundwire Speaker Amplifier" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + help + Enable support for Analog Devices MAX98363 Soundwire + amplifier. MAX98363 supports the MIPI SoundWire v1.2 + compatible interface for audio and control data. + This amplifier does not support I2C and I2S. + config SND_SOC_MAX98373 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 25ebce58a0ba..44ea747579fd 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -148,6 +148,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98520-objs := max98520.o +snd-soc-max98363-objs := max98363.o snd-soc-max98373-objs := max98373.o snd-soc-max98373-i2c-objs := max98373-i2c.o snd-soc-max98373-sdw-objs := max98373-sdw.o @@ -515,6 +516,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o +obj-$(CONFIG_SND_SOC_MAX98363) += snd-soc-max98363.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o diff --git a/sound/soc/codecs/max98363.c b/sound/soc/codecs/max98363.c new file mode 100644 index 000000000000..4585ebb1e82c --- /dev/null +++ b/sound/soc/codecs/max98363.c @@ -0,0 +1,464 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Analog Devices Inc. + +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98363.h" + +static struct reg_default max98363_reg[] = { + {MAX98363_R2001_INTR_RAW, 0x0}, + {MAX98363_R2003_INTR_STATE, 0x0}, + {MAX98363_R2005_INTR_FALG, 0x0}, + {MAX98363_R2007_INTR_EN, 0x0}, + {MAX98363_R2009_INTR_CLR, 0x0}, + {MAX98363_R2021_ERR_MON_CTRL, 0x0}, + {MAX98363_R2022_SPK_MON_THRESH, 0x0}, + {MAX98363_R2023_SPK_MON_DURATION, 0x0}, + {MAX98363_R2030_TONE_GEN_CFG, 0x0}, + {MAX98363_R203F_TONE_GEN_EN, 0x0}, + {MAX98363_R2040_AMP_VOL, 0x0}, + {MAX98363_R2041_AMP_GAIN, 0x5}, + {MAX98363_R2042_DSP_CFG, 0x0}, + {MAX98363_R21FF_REV_ID, 0x0}, +}; + +static bool max98363_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98363_R2001_INTR_RAW: + case MAX98363_R2003_INTR_STATE: + case MAX98363_R2005_INTR_FALG: + case MAX98363_R2007_INTR_EN: + case MAX98363_R2009_INTR_CLR: + case MAX98363_R2021_ERR_MON_CTRL ... MAX98363_R2023_SPK_MON_DURATION: + case MAX98363_R2030_TONE_GEN_CFG: + case MAX98363_R203F_TONE_GEN_EN: + case MAX98363_R2040_AMP_VOL: + case MAX98363_R2041_AMP_GAIN: + case MAX98363_R2042_DSP_CFG: + case MAX98363_R21FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98363_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98363_R2001_INTR_RAW: + case MAX98363_R2003_INTR_STATE: + case MAX98363_R2005_INTR_FALG: + case MAX98363_R2007_INTR_EN: + case MAX98363_R2009_INTR_CLR: + case MAX98363_R21FF_REV_ID: + return true; + default: + return false; + } +} + +static const struct regmap_config max98363_sdw_regmap = { + .reg_bits = 32, + .val_bits = 8, + .max_register = MAX98363_R21FF_REV_ID, + .reg_defaults = max98363_reg, + .num_reg_defaults = ARRAY_SIZE(max98363_reg), + .readable_reg = max98363_readable_register, + .volatile_reg = max98363_volatile_reg, + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static int max98363_suspend(struct device *dev) +{ + struct max98363_priv *max98363 = dev_get_drvdata(dev); + + regcache_cache_only(max98363->regmap, true); + regcache_mark_dirty(max98363->regmap); + + return 0; +} + +#define MAX98363_PROBE_TIMEOUT 5000 + +static int max98363_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct max98363_priv *max98363 = dev_get_drvdata(dev); + unsigned long time; + + if (!max98363->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(MAX98363_PROBE_TIMEOUT)); + if (!time) { + dev_err(dev, "Initialization not complete, timed out\n"); + return -ETIMEDOUT; + } + +regmap_sync: + + slave->unattach_request = 0; + regcache_cache_only(max98363->regmap, false); + regcache_sync(max98363->regmap); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(max98363_pm, max98363_suspend, max98363_resume, NULL); + +static int max98363_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval, i; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + + /* BITMAP: 00000010 Dataport 1 is active */ + prop->sink_ports = BIT(1); + prop->paging_support = true; + prop->clk_stop_timeout = 20; + prop->simple_clk_stop_capable = true; + prop->clock_reg_supported = true; + + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), + GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + return 0; +} + +static int max98363_io_init(struct sdw_slave *slave) +{ + struct device *dev = &slave->dev; + struct max98363_priv *max98363 = dev_get_drvdata(dev); + int ret, reg; + + if (max98363->first_hw_init) { + regcache_cache_only(max98363->regmap, false); + regcache_cache_bypass(max98363->regmap, true); + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!max98363->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(dev, 3000); + pm_runtime_use_autosuspend(dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(dev); + + pm_runtime_enable(dev); + } + + pm_runtime_get_noresume(dev); + + ret = regmap_read(max98363->regmap, MAX98363_R21FF_REV_ID, &reg); + if (!ret) { + dev_info(dev, "Revision ID: %X\n", reg); + return ret; + } + + if (max98363->first_hw_init) { + regcache_cache_bypass(max98363->regmap, false); + regcache_mark_dirty(max98363->regmap); + } + + max98363->first_hw_init = true; + max98363->hw_init = true; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; +} + +#define MAX98363_RATES SNDRV_PCM_RATE_8000_192000 +#define MAX98363_FORMATS (SNDRV_PCM_FMTBIT_S32_LE) + +static int max98363_sdw_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98363_priv *max98363 = + snd_soc_component_get_drvdata(component); + + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_runtime *stream; + struct snd_pcm_runtime *runtime = substream->runtime; + + int ret; + + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!max98363->slave) + return -EINVAL; + + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) + return -EINVAL; + + direction = SDW_DATA_DIR_RX; + port_config.num = 1; + + stream_config.frame_rate = params_rate(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + stream_config.ch_count = params_channels(params); + + if (stream_config.ch_count > runtime->hw.channels_max) { + stream_config.ch_count = runtime->hw.channels_max; + dev_info(dai->dev, "Number of channels: %d (requested: %d)\n", + stream_config.ch_count, params_channels(params)); + } + port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0); + + ret = sdw_stream_add_slave(max98363->slave, &stream_config, + &port_config, 1, stream); + if (ret) { + dev_err(dai->dev, "Unable to configure port\n"); + return ret; + } + + dev_dbg(component->dev, "Format supported %d", params_format(params)); + + return 0; +} + +static int max98363_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98363_priv *max98363 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!max98363->slave) + return -EINVAL; + + sdw_stream_remove_slave(max98363->slave, stream); + + return 0; +} + +static int max98363_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static const struct snd_soc_dai_ops max98363_dai_sdw_ops = { + .hw_params = max98363_sdw_dai_hw_params, + .hw_free = max98363_pcm_hw_free, + .set_stream = max98363_set_sdw_stream, +}; + +static struct snd_soc_dai_driver max98363_dai[] = { + { + .name = "max98363-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 1, + .rates = MAX98363_RATES, + .formats = MAX98363_FORMATS, + }, + .ops = &max98363_dai_sdw_ops, + } +}; + +static int max98363_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct max98363_priv *max98363 = dev_get_drvdata(&slave->dev); + + if (status == SDW_SLAVE_UNATTACHED) + max98363->hw_init = false; + + /* + * Perform initialization only if slave status is SDW_SLAVE_ATTACHED + */ + if (max98363->hw_init || status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return max98363_io_init(slave); +} + +static struct sdw_slave_ops max98363_slave_ops = { + .read_prop = max98363_read_prop, + .update_status = max98363_update_status, +}; + +static DECLARE_TLV_DB_SCALE(max98363_digital_tlv, -6350, 50, 1); +static const DECLARE_TLV_DB_RANGE(max98363_spk_tlv, + 0, 5, TLV_DB_SCALE_ITEM(-300, 300, 0), +); + +static const char * const max98363_tone_cfg_text[] = { + "Reserved", "0", "+FS/2", "-FS/2", "1KHz", + "12KHz", "8KHz", "6KHz", "4KHz", "3KHz", + "2KHz", "1.5KHz", "Reserved", "500Hz", "250Hz" +}; + +static SOC_ENUM_SINGLE_DECL(max98363_tone_cfg_enum, + MAX98363_R2030_TONE_GEN_CFG, 0, + max98363_tone_cfg_text); + +static const char * const max98363_spkmon_duration_text[] = { + "8ms", "20ms", "40ms", "60ms", + "80ms", "160ms", "240ms", "320ms", + "400ms", "480ms", "560ms", "640ms", + "720ms", "800ms", "880ms", "960ms" +}; + +static SOC_ENUM_SINGLE_DECL(max98363_spkmon_duration_enum, + MAX98363_R2023_SPK_MON_DURATION, 0, + max98363_spkmon_duration_text); + +static const struct snd_kcontrol_new max98363_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", MAX98363_R2040_AMP_VOL, + 0, 0x7F, 1, max98363_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98363_R2041_AMP_GAIN, + 0, 10, 0, max98363_spk_tlv), + SOC_SINGLE("Tone Generator Switch", MAX98363_R203F_TONE_GEN_EN, + 0, 1, 0), + SOC_ENUM("Tone Config", max98363_tone_cfg_enum), + SOC_SINGLE("Ramp Switch", MAX98363_R2042_DSP_CFG, + MAX98363_AMP_DSP_CFG_RMP_SHIFT, 1, 0), + SOC_SINGLE("CLK Monitor Switch", MAX98363_R2021_ERR_MON_CTRL, + MAX98363_CLOCK_MON_SHIFT, 1, 0), + SOC_SINGLE("SPKMON Monitor Switch", MAX98363_R2021_ERR_MON_CTRL, + MAX98363_SPKMON_SHIFT, 1, 0), + SOC_SINGLE("SPKMON Thresh", MAX98363_R2022_SPK_MON_THRESH, 0, 0xFF, 0), + SOC_ENUM("SPKMON Duration", max98363_spkmon_duration_enum), +}; + +static const struct snd_soc_dapm_widget max98363_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("AIFIN", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98363_audio_map[] = { + /* Plabyack */ + {"BE_OUT", NULL, "AIFIN"}, +}; + +const struct snd_soc_component_driver soc_codec_dev_max98363 = { + .controls = max98363_snd_controls, + .num_controls = ARRAY_SIZE(max98363_snd_controls), + .dapm_widgets = max98363_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98363_dapm_widgets), + .dapm_routes = max98363_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98363_audio_map), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static int max98363_init(struct sdw_slave *slave, struct regmap *regmap) +{ + struct max98363_priv *max98363; + int ret; + struct device *dev = &slave->dev; + + /* Allocate and assign private driver data structure */ + max98363 = devm_kzalloc(dev, sizeof(*max98363), GFP_KERNEL); + if (!max98363) + return -ENOMEM; + + dev_set_drvdata(dev, max98363); + max98363->regmap = regmap; + max98363->slave = slave; + + max98363->hw_init = false; + max98363->first_hw_init = false; + + /* codec registration */ + ret = devm_snd_soc_register_component(dev, &soc_codec_dev_max98363, + max98363_dai, + ARRAY_SIZE(max98363_dai)); + if (ret < 0) + dev_err(dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static int max98363_sdw_probe(struct sdw_slave *slave, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + + /* Regmap Initialization */ + regmap = devm_regmap_init_sdw(slave, &max98363_sdw_regmap); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return max98363_init(slave, regmap); +} + +static const struct sdw_device_id max98363_id[] = { + SDW_SLAVE_ENTRY(0x019F, 0x8363, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, max98363_id); + +static struct sdw_driver max98363_sdw_driver = { + .driver = { + .name = "max98363", + .pm = pm_ptr(&max98363_pm), + }, + .probe = max98363_sdw_probe, + .ops = &max98363_slave_ops, + .id_table = max98363_id, +}; + +module_sdw_driver(max98363_sdw_driver); + +MODULE_DESCRIPTION("ASoC MAX98363 driver SDW"); +MODULE_AUTHOR("Ryan Lee <ryans.lee(a)analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98363.h b/sound/soc/codecs/max98363.h new file mode 100644 index 000000000000..2b6743d3a2cf --- /dev/null +++ b/sound/soc/codecs/max98363.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2022 Analog Devices Inc. */ + +#ifndef _MAX98363_H +#define _MAX98363_H + +#define MAX98363_R2000_SW_RESET 0x2000 +#define MAX98363_R2001_INTR_RAW 0x2001 +#define MAX98363_R2003_INTR_STATE 0x2003 +#define MAX98363_R2005_INTR_FALG 0x2005 +#define MAX98363_R2007_INTR_EN 0x2007 +#define MAX98363_R2009_INTR_CLR 0x2009 +#define MAX98363_R2021_ERR_MON_CTRL 0x2021 +#define MAX98363_R2022_SPK_MON_THRESH 0x2022 +#define MAX98363_R2023_SPK_MON_DURATION 0x2023 +#define MAX98363_R2030_TONE_GEN_CFG 0x2030 +#define MAX98363_R203F_TONE_GEN_EN 0x203F +#define MAX98363_R2040_AMP_VOL 0x2040 +#define MAX98363_R2041_AMP_GAIN 0x2041 +#define MAX98363_R2042_DSP_CFG 0x2042 +#define MAX98363_R21FF_REV_ID 0x21FF + +/* MAX98363_R2021_ERR_MON_CTRL */ +#define MAX98363_SPKMON_SHIFT (3) +#define MAX98363_CLOCK_MON_SHIFT (0) + +/* MAX98363_R2042_DSP_CFG */ +#define MAX98363_AMP_DSP_CFG_RMP_SHIFT (3) + +struct max98363_priv { + struct regmap *regmap; + struct sdw_slave *slave; + bool hw_init; + bool first_hw_init; +}; +#endif -- 2.34.1

4 4

[PATCH] ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
by Andy Chi 31 Mar '23

31 Mar '23

There is a HP ProBook which using ALC236 codec and need the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and micmute LED work. Signed-off-by: Andy Chi <andy.chi(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b501f9489fc1..d5d8e33f2e20 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9443,6 +9443,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8b47, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b5d, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8b5e, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), + SND_PCI_QUIRK(0x103c, 0x8b66, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8b7a, "HP", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b7d, "HP", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b87, "HP", ALC236_FIXUP_HP_GPIO_LED), -- 2.34.1

2 1

[PATCH v2 1/3] soundwire: bus: Remove now outdated comments on no_pm IO
by Charles Keepax 31 Mar '23

31 Mar '23

Things have moved more towards end drivers using the no_pm versions of the IO functions. See commits: commit 167790abb90f ("soundwire: export sdw_write/read_no_pm functions") commit 62dc9f3f2fd0 ("soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions") As such this comment is now misleading, so remove it. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- No change since v1. drivers/soundwire/bus.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index b6aca59c31300..3c67266f94834 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -384,9 +384,6 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, /* * Read/Write IO functions. - * no_pm versions can only be called by the bus, e.g. while enumerating or - * handling suspend-resume sequences. - * all clients need to use the pm versions */ int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) -- 2.30.2

2 3

[PATCH v2 0/2] soundwire: stream: uniquify dev_err() logs
by Bard Liao 31 Mar '23

31 Mar '23

There are a couple of duplicate logs which makes harder than needed to follow the error flows. Add __func__ or make the log unique. This series also changed some uses of "dev_err(bus->dev," where the stream may depend on multiple managers/buses. v2: - Split the original patch into two patches Pierre-Louis Bossart (2): soundwire: stream: remove bus->dev from logs on multiple buses soundwire: stream: uniquify dev_err() logs drivers/soundwire/stream.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) -- 2.25.1

2 3

[PATCH V8 0/8] Add SoundWire support for AMD platforms
by Vijendar Mukunda 31 Mar '23

31 Mar '23

ACP IP(v6.x) block has two SoundWire manager instance support. This patchset adds support for AMD SoundWire manager driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> changes since v7: - use readl/writel instead of acp_reg_readl() & acp_reg_writel(). - drop acp_reg_readl() & acp_reg_writel() - use readl_poll_timeout() instead of read_poll_timeout() - refactor command prepration and response error handling. - Modify switch statement in amd_sdw_fill_slave_status(). - use lower case for hex values. - restrict debug logs to single line. changes since v6: - remove pm suspend check in amd_resume_child_device() and always return 0. - use same name convention for command and response variables. changes since v5: - replace loops logic with read_poll_timeout() throughout the code. changes since v4: - fix nit-picks in the code. - update naming convention for control word and response buffer vairables. - drop pm_suspend check in prepare callback. - use return statement instead of returning ret variable. changes since v3: - add usleep_range() in command/response implementation. - add usleep_range() in clock stop sequence. - modify usleep_range() values throughout the code. - remove unncessary debug statement from code. - update comment in probe() call. - fix timeout condition checks in the code. - drop "ret" variable in amd_disable_sdw_manager(). changes since v2: - Remove useless variable initializations. - Add helper function to interpret peripheral status. - Move runtime pm sequence to probe_work workqueue. - Use string "SoundWire" instead of "soundwire" in code. - Update comments in interrupt handler and probe sequence. - Rename "sdw_lock" as "acp_sdw_lock". - Remove __func__ from dev_dbg statements. changes since v1: - Drop asoc tree based patches. will send asoc patches as a separate series. - Fixed double space errors. - Use dev instead of pci->dev. - Use SoundWire manager terminology. - Remove amd_sdw_compute_slave_ports() function and use exported sdw_compute_slave_ports() function. - Remove unused variable "num_ports" from amd_manager structure. - Drop startup and shutdown dai callbacks. - Drop reset_page_addr callback. - Use relative address offset to program SoundWire manager registers throughout the code. - Separate wake enable interrupt handling from slave status handling logic. - Use acp_mmio to program ACP common registers. - Use dai_runtime_array implementation in dai_ops. - Refactor port_ops callbacks. - Add comments in port_ops callbacks. - Add retry count logic in irq thread to address faulty case. - Add helper function to interpret command response. - Add generic bandwidth allocation dependency in Kconfig options. - Add comments for AMD SoundWire power modes. - Add missing timeout check in amd_init_sdw_manager callback. - Declare frameshape parameters in probe call. - Handle error case in clock stop sequence. - Add comments in pm_prepare and pm_ops callbacks. Vijendar Mukunda (8): soundwire: export sdw_compute_slave_ports() function soundwire: amd: Add support for AMD Manager driver soundwire: amd: register SoundWire manager dai ops soundwire: amd: enable build for AMD SoundWire manager driver soundwire: amd: add SoundWire manager interrupt handling soundwire: amd: add runtime pm ops for AMD SoundWire manager driver soundwire: amd: handle SoundWire wake enable interrupt soundwire: amd: add pm_prepare callback and pm ops support drivers/soundwire/Kconfig | 10 + drivers/soundwire/Makefile | 4 + drivers/soundwire/amd_manager.c | 1208 +++++++++++++++++ drivers/soundwire/amd_manager.h | 258 ++++ drivers/soundwire/bus.h | 9 + .../soundwire/generic_bandwidth_allocation.c | 12 +- include/linux/soundwire/sdw_amd.h | 109 ++ 7 files changed, 1601 insertions(+), 9 deletions(-) create mode 100644 drivers/soundwire/amd_manager.c create mode 100644 drivers/soundwire/amd_manager.h create mode 100644 include/linux/soundwire/sdw_amd.h -- 2.34.1

3 11

[PATCH v2] dt-bindings: pinctrl: Drop unneeded quotes
by Rob Herring 31 Mar '23

31 Mar '23

Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Acked-by: Hector Martin <marcan(a)marcan.st> Acked-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Acked-by: Jernej Skrabec <jernej.skrabec(a)gmail.com> Reviewed-by: Heiko Stuebner <heiko(a)sntech.de> #rockchip Reviewed-by: Damien Le Moal <damien.lemoal(a)opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Signed-off-by: Rob Herring <robh(a)kernel.org> --- v2: - Rebase on pinctrl tree --- .../bindings/pinctrl/actions,s500-pinctrl.yaml | 2 +- .../bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/apple,pinctrl.yaml | 2 +- .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/brcm,bcm6318-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm63268-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6328-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6358-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6362-pinctrl.yaml | 2 +- .../bindings/pinctrl/brcm,bcm6368-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml | 2 +- .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 +- .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 2 +- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 4 ++-- .../devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml | 2 +- .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/ingenic,pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/intel,lgm-io.yaml | 2 +- .../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 4 ++-- .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 6 +++--- .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 4 ++-- .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 4 ++-- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 2 +- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml | 2 +- .../devicetree/bindings/pinctrl/renesas,pfc.yaml | 2 +- .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +- .../bindings/pinctrl/renesas,rza2-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzn1-pinctrl.yaml | 2 +- .../bindings/pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/rockchip,pinctrl.yaml | 10 +++++----- .../devicetree/bindings/pinctrl/samsung,pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/semtech,sx1501q.yaml | 6 +++--- .../bindings/pinctrl/socionext,uniphier-pinctrl.yaml | 2 +- .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 10 +++++----- .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 6 +++--- .../bindings/pinctrl/toshiba,visconti-pinctrl.yaml | 8 ++++---- .../devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml | 2 +- 45 files changed, 72 insertions(+), 72 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index fb0f69ce9c16..7cb8a747feee 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -185,7 +185,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index 1e3c8de6cae1..467016cbb037 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -142,7 +142,7 @@ allOf: # boards are defining it at the moment so it would generate a lot of # warnings. - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: not: properties: diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml index d3b11351ca45..9b4e0ae61ffe 100644 --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml @@ -73,7 +73,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index f4f1ee6b116e..bef85c25cdef 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -32,7 +32,7 @@ patternProperties: then: patternProperties: "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, @@ -51,7 +51,7 @@ patternProperties: VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 8168f0088471..14c391f16899 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -44,7 +44,7 @@ patternProperties: then: patternProperties: "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, @@ -65,7 +65,7 @@ patternProperties: VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 62424c42c981..859a1889dc1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,7 +30,7 @@ patternProperties: then: properties: function: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, @@ -55,7 +55,7 @@ patternProperties: USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] groups: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, @@ -84,7 +84,7 @@ patternProperties: WDTRST3, WDTRST4] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml index ab019a1998e8..4478a76171f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -38,7 +38,7 @@ patternProperties: gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml index 8c9d4668c8c4..73e1caa7c011 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -42,7 +42,7 @@ patternProperties: vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml index a8e22ec02215..2750ba42aeb8 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -37,7 +37,7 @@ patternProperties: usb_port1 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml index 35867355a47a..2f6c540498bc 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -35,7 +35,7 @@ patternProperties: led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml index b584d4b27223..b3044f805753 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -42,7 +42,7 @@ patternProperties: gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml index 229323d9237d..3236871827df 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -43,7 +43,7 @@ patternProperties: gpio31, uart1_grp ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml index 8d1e5b1cdd5f..0a39dd26ee1a 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml @@ -53,7 +53,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index a78cb2796001..7f4f36a58e56 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -144,7 +144,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml index 5cd512b7d5ba..5e000b3fadde 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -173,7 +173,7 @@ properties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 6bd42e43cdab..bb61a30321a1 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -40,8 +40,8 @@ properties: '-pins$': type: object allOf: - - $ref: "pincfg-node.yaml#" - - $ref: "pinmux-node.yaml#" + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# properties: groups: description: diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 915cbbcc3555..222d57541b65 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -109,7 +109,7 @@ required: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml index 621038662188..7bd723ab1281 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -68,7 +68,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml index 7ae084397258..6068be11dfe2 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml @@ -65,7 +65,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml index 693398d88223..7dcf681271d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml @@ -57,7 +57,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml index 66baa6082a4f..2f2405102996 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml @@ -14,7 +14,7 @@ description: for common binding part and usage. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index a4397930e0e8..35723966b70a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -119,7 +119,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index ca0fef6e535e..1144ca2896e3 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -48,7 +48,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml index 491f67e7cc4f..afea9424c7e1 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -28,7 +28,7 @@ patternProperties: properties: marvell,function: - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string description: Indicates the function to select. enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, @@ -47,7 +47,7 @@ patternProperties: mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml index 98d547c34ef3..dbb3e1bd58c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -54,8 +54,8 @@ patternProperties: '-pins$': type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: function: true @@ -78,7 +78,7 @@ required: - gpio-ranges allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index db505fdeac86..1096655961f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -395,8 +395,8 @@ $defs: qcom-pmic-gpio-state: type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: pins: description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 9412b9362328..c91d3e3a094b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -82,8 +82,8 @@ $defs: qcom-pmic-mpp-state: type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: pins: description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index e51feb4c0700..fa51fa9536f7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -50,7 +50,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index de9d8854c690..4b4be7efc150 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -55,7 +55,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index cb5ba1bd6f8d..2da1437358b7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -52,7 +52,7 @@ properties: information. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - interrupts diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 4fc758fea7e6..0fc3c0f52c19 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -73,7 +73,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 9083040c996a..83800fcf0ce4 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index d761fddc2206..37173a64fed2 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -73,7 +73,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index f081acb7ba04..9ce1a07fc015 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -113,7 +113,7 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 70b1788ab594..f3b85b7eae31 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -32,7 +32,7 @@ properties: The bus clock, sometimes described as pclk, for register accesses. allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index eac6245db7dc..03f084292d68 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -94,7 +94,7 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 45b767986a87..10c335efe619 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -50,12 +50,12 @@ properties: - rockchip,rv1126-pinctrl rockchip,grf: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the syscon node for the GRF registers. rockchip,pmu: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the syscon node for the PMU registers, as some SoCs carry parts of the iomux controller registers there. @@ -71,7 +71,7 @@ properties: ranges: true allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -81,7 +81,7 @@ patternProperties: "gpio@[0-9a-f]+$": type: object - $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" + $ref: /schemas/gpio/rockchip,gpio-bank.yaml# deprecated: true unevaluatedProperties: false @@ -117,7 +117,7 @@ additionalProperties: type: object properties: rockchip,pins: - $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + $ref: /schemas/types.yaml#/definitions/uint32-matrix minItems: 1 items: items: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index eb2b2692607d..26614621774a 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -117,7 +117,7 @@ required: - reg allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml index 0719c03d6f4b..4214d7311f6b 100644 --- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml @@ -62,8 +62,8 @@ patternProperties: - pins allOf: - - $ref: "pincfg-node.yaml#" - - $ref: "pinmux-node.yaml#" + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# - if: properties: pins: @@ -86,7 +86,7 @@ required: - gpio-controller allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# - if: not: properties: diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index bc34e2c872bc..a6f34df82e90 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -61,7 +61,7 @@ additionalProperties: unevaluatedProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index eeb29b4ad4d1..1ab0f8dde477 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -44,7 +44,7 @@ properties: st,syscfg: description: Phandle+args to the syscon node which includes IRQ mux selection. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: syscon node which includes IRQ mux selection @@ -89,7 +89,7 @@ patternProperties: st,bank-name: description: Should be a name string for this bank as specified in the datasheet. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - GPIOA - GPIOB @@ -108,7 +108,7 @@ patternProperties: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 11 @@ -140,7 +140,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -201,7 +201,7 @@ patternProperties: - pinmux allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml index 69c0dd9998ea..27eff891685b 100644 --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -111,7 +111,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, bias, input enable/disable, input schmitt trigger enable/disable, slew-rate and drive strength. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: @@ -120,14 +120,14 @@ patternProperties: This should be set using either the PAD_GPIO or PAD_FUNC_SHARE macros. Either this or "pinmux" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins pinmux: description: | The list of GPIOs and their mux settings that properties in the node apply to. This should be set using the GPIOMUX macro. Either this or "pins" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml index 347061eece9e..94b868c7ceb1 100644 --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -138,7 +138,7 @@ patternProperties: description: | Define pin-function which is used by pinctrl node's client device. The name should be one of string in the following enumeration. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ] @@ -146,7 +146,7 @@ patternProperties: description: | Define pin-group in a specified pin-function. The name should be one of string in the following enumeration. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2, SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1, HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ] @@ -289,7 +289,7 @@ required: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index 98b4663f9766..19d47fd414bc 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -21,7 +21,7 @@ properties: maxItems: 1 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -35,14 +35,14 @@ patternProperties: pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength. - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml additionalProperties: false properties: function: description: Function to mux. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, spi0, spi1, spi2, spi3, spi4, spi5, spi6, uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] @@ -50,7 +50,7 @@ patternProperties: groups: description: Name of the pin group to use for the functions. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index cfd0cc549a7b..598a042850b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -168,7 +168,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible -- 2.39.2

2 1

[PATCH 0/8] ASoC: qcom: q6dsp and lpass codec stablity fixes
by Srinivas Kandagatla 31 Mar '23

31 Mar '23

While testing X13s audio, we found multiple stablity issues this patchset fixes these issues. From q6dsp side issues are around locking of position pointer and handle multiple prepare cases along with pulse audio timerbased scheduling workaround. From LPASS codec side most of the staiblity issues were around runtime pm, hitting various issues as the codec was firstly resetting the soundwire block for every clk disable/enable which is taking the slaves out of sync and resulting in re-enumerating. Second issue was around fsgen clk is not brining up the codec out of suspend as it was not added after runtime pm enabled. Final issue was with codec mclk rate which should have been 192KHz same as npl instead of 96KHz. We were getting lucky as wsa drivers are setting the same clk to 192KHz. With this patches, x13s audio is pretty stable. thanks, Srini Srinivas Kandagatla (8): ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag ASoC: qcom: audioreach: fix ADSP ready check ASoC: codecs: lpass: register mclk after runtime pm ASoC: codecs: lpass: fix incorrect mclk rate ASoC: codecs: lpass: do not reset soundwire block on clk enable ASoC: codecs: lpass: remove not so useful verbose log sound/soc/codecs/lpass-rx-macro.c | 31 ++++++++++-------- sound/soc/codecs/lpass-tx-macro.c | 25 ++++++++------ sound/soc/codecs/lpass-va-macro.c | 43 +++++++++++++------------ sound/soc/codecs/lpass-wsa-macro.c | 27 ++++++++-------- sound/soc/qcom/qdsp6/q6apm-dai.c | 22 +++++++++++-- sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 5 +++ sound/soc/qcom/qdsp6/q6apm.c | 17 +++++----- 7 files changed, 101 insertions(+), 69 deletions(-) -- 2.21.0

3 12