- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: emu10k1: minor E-MU naming fixups
by Oswald Buddenhagen 08 May '23

08 May '23

- Fix mixer source port names. These will require some users to re-adjust their mixer settings, which seems acceptable: - The S/PDIF port is on the main 1010 card, not the 0202 daughter card - The 1616m CardBus card has all inputs on the dock, so there is no point in specifying it - Conversely, the 1010 card has "dispersed" inputs, so say where the ADAT port is, consistently with the S/PDIF port - The 1616m CardBus card is actually named E-MU 02 (due to the headphone output jack it has) - Fix capitalization of "E-MU" Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 16 +++++++------- sound/pci/emu10k1/emumixer.c | 36 ++++++++++++++++---------------- 2 files changed, 26 insertions(+), 26 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 3abdaf1b9624..5d9d772e3a13 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1310,7 +1310,7 @@ static const struct snd_emu_chip_details emu_chip_details[] = { /* Does NOT support sync daughter card (obviously). */ /* Tested by James(a)superbug.co.uk 4th Nov 2007. */ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102, - .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]", + .driver = "Audigy2", .name = "E-MU 02 CardBus [MAEM8950]", .id = "EMU1010", .emu10k2_chip = 1, .ca0108_chip = 1, @@ -1323,7 +1323,7 @@ static const struct snd_emu_chip_details emu_chip_details[] = { * MicroDock[M] to make it an E-MU 1616[m]. */ /* Does NOT support sync daughter card. */ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102, - .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM8960]", + .driver = "Audigy2", .name = "E-MU 1010b PCI [MAEM8960]", .id = "EMU1010", .emu10k2_chip = 1, .ca0108_chip = 1, @@ -1337,48 +1337,48 @@ static const struct snd_emu_chip_details emu_chip_details[] = { * still work. */ /* Does NOT support sync daughter card. */ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102, - .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]", + .driver = "Audigy2", .name = "E-MU 1010 PCIe [MAEM8986]", .id = "EMU1010", .emu10k2_chip = 1, .ca0108_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */ /* Tested by James(a)superbug.co.uk 8th July 2005. */ /* This is MAEM8810 "Hana", 0202 is MAEM8820 "Hamoa" */ /* Attach 0202 daughter card to make it an E-MU 1212m, OR an * AudioDock[M] to make it an E-MU 1820[m]. */ /* Supports sync daughter card. */ {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102, - .driver = "Audigy2", .name = "E-mu 1010 [MAEM8810]", + .driver = "Audigy2", .name = "E-MU 1010 [MAEM8810]", .id = "EMU1010", .emu10k2_chip = 1, .ca0102_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU1010}, /* EMU 1010 old revision */ /* This is MAEM8852 "HanaLiteLite" */ /* Supports sync daughter card. */ /* Tested by oswald.buddenhagen(a)gmx.de Mar 2023. */ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40021102, - .driver = "Audigy2", .name = "E-mu 0404b PCI [MAEM8852]", + .driver = "Audigy2", .name = "E-MU 0404b PCI [MAEM8852]", .id = "EMU0404", .emu10k2_chip = 1, .ca0108_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 new revision */ /* This is MAEM8850 "HanaLite" */ /* Supports sync daughter card. */ /* Tested by James(a)superbug.co.uk 20-3-2007. */ {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40021102, - .driver = "Audigy2", .name = "E-mu 0404 [MAEM8850]", + .driver = "Audigy2", .name = "E-MU 0404 [MAEM8850]", .id = "EMU0404", .emu10k2_chip = 1, .ca0102_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */ /* EMU0404 PCIe */ /* Does NOT support sync daughter card. */ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102, - .driver = "Audigy2", .name = "E-mu 0404 PCIe [MAEM8984]", + .driver = "Audigy2", .name = "E-MU 0404 PCIe [MAEM8984]", .id = "EMU0404", .emu10k2_chip = 1, .ca0108_chip = 1, @@ -1645,7 +1645,7 @@ static const struct snd_emu_chip_details emu_chip_details[] = { .ac97_chip = 1, .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102, - .driver = "EMU10K1", .name = "E-mu APS [PC545]", + .driver = "EMU10K1", .name = "E-MU APS [PC545]", .id = "APS", .emu10k1_chip = 1, .ecard = 1} , diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 8fce3413f4ae..a101fe7598c4 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -81,16 +81,16 @@ static const char * const emu1010_src_texts[] = { "Dock ADC3 Right", "0202 ADC Left", "0202 ADC Right", - "0202 SPDIF Left", - "0202 SPDIF Right", - "ADAT 0", - "ADAT 1", - "ADAT 2", - "ADAT 3", - "ADAT 4", - "ADAT 5", - "ADAT 6", - "ADAT 7", + "1010 SPDIF Left", + "1010 SPDIF Right", + "1010 ADAT 0", + "1010 ADAT 1", + "1010 ADAT 2", + "1010 ADAT 3", + "1010 ADAT 4", + "1010 ADAT 5", + "1010 ADAT 6", + "1010 ADAT 7", "DSP 0", "DSP 1", "DSP 2", @@ -129,14 +129,14 @@ static const char * const emu1010_src_texts[] = { static const char * const emu1616_src_texts[] = { "Silence", - "Dock Mic A", - "Dock Mic B", - "Dock ADC1 Left", - "Dock ADC1 Right", - "Dock ADC2 Left", - "Dock ADC2 Right", - "Dock SPDIF Left", - "Dock SPDIF Right", + "Mic A", + "Mic B", + "ADC1 Left", + "ADC1 Right", + "ADC2 Left", + "ADC2 Right", + "SPDIF Left", + "SPDIF Right", "ADAT 0", "ADAT 1", "ADAT 2", -- 2.40.0.152.g15d061e6df

2 1

[PATCH 0/6] ALSA: emu10k1: Various improvements related to locking
by Oswald Buddenhagen 08 May '23

08 May '23

--- This patch series needs to be applied on top of the patch titled "ALSA: emu10k1: use more existing defines instead of open-coded numbers". Oswald Buddenhagen (6): ALSA: emu10k1: remove pointless locks from timer code ALSA: emu10k1: remove pointless locks from /proc code ALSA: emu10k1: use the right lock in snd_emu10k1_shared_spdif_put() ALSA: emu10k1: fix locking in snd_emu1010_fpga_link_dst_src_write() ALSA: core: update comment on snd_card.controls_rwsem ALSA: emu10k1: remove now superfluous mixer locking include/sound/core.h | 2 +- sound/pci/emu10k1/emufx.c | 7 ------- sound/pci/emu10k1/emumixer.c | 32 ++------------------------------ sound/pci/emu10k1/emupcm.c | 2 -- sound/pci/emu10k1/emuproc.c | 6 ------ sound/pci/emu10k1/io.c | 25 +++++++++++++++++-------- sound/pci/emu10k1/timer.c | 6 ------ 7 files changed, 20 insertions(+), 60 deletions(-) -- 2.40.0.152.g15d061e6df

2 7

[PATCH v2] soundwire: bus: Don't filter slave alerts
by Charles Keepax 08 May '23

08 May '23

It makes sense to have only a single point responsible for ensuring that all currently pending IRQs are handled. The current code in sdw_handle_slave_alerts confusingly splits this process in two. This code will loop until the asserted IRQs are cleared but it will only handle IRQs that were already asserted when it was called. This means the caller must also loop (either manually, or through its IRQ mechanism) until the IRQs are all handled. It makes sense to either do all the looping in sdw_handle_slave_alerts or do no looping there and let the host controller repeatedly call it until things are handled. There are realistically two sensible host controllers, those that will generate an IRQ when the alert status changes and those that will generate an IRQ continuously whilst the alert status is high. The current code will work fine for the second of those systems but not the first with out additional looping in the host controller. Removing the code that filters out new IRQs whilst the handler is running enables both types of host controller to be supported and simplifies the code. The code will still only loop up to SDW_READ_INTR_CLEAR_RETRY times, so it shouldn't be possible for it to get completely stuck handling IRQs forever, and if you are generating IRQs faster than you can handle them you likely have bigger problems anyway. This fixes an issue on the Cadence SoundWire IP, which only generates IRQs on an alert status change, where an alert which arrives whilst another alert is being handled will never be handled and will block all future alerts from being handled. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- Changes since v1: - Update commit message Thanks, Charles drivers/soundwire/bus.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 1ea6a64f8c4a5..338f4f0b5d0cc 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1588,7 +1588,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) unsigned long port; bool slave_notify; u8 sdca_cascade = 0; - u8 buf, buf2[2], _buf, _buf2[2]; + u8 buf, buf2[2]; bool parity_check; bool parity_quirk; @@ -1745,9 +1745,9 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) "SDW_SCP_INT1 recheck read failed:%d\n", ret); goto io_err; } - _buf = ret; + buf = ret; - ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, _buf2); + ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, buf2); if (ret < 0) { dev_err(&slave->dev, "SDW_SCP_INT2/3 recheck read failed:%d\n", ret); @@ -1765,12 +1765,8 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) } /* - * Make sure no interrupts are pending, but filter to limit loop - * to interrupts identified in the first status read + * Make sure no interrupts are pending */ - buf &= _buf; - buf2[0] &= _buf2[0]; - buf2[1] &= _buf2[1]; stat = buf || buf2[0] || buf2[1] || sdca_cascade; /* -- 2.30.2

3 2

[PATCH v3 0/7] soundwire: qcom: add support for SM8550 (Soundwire v2.0.0)
by Krzysztof Kozlowski 08 May '23

08 May '23

Hi, Changes since v2: 1. Use uint16 for qcom,ports-sinterval. DTS will be fixed in separate patchset. 2. Add tags. Changes since v1: 1. Patch 1: Increase maxItems to 16 for port-related properties. 2. Re-order patch 1 and 2. 3. Patch 3: Drop unneeded semicolon. 4. Patch 5: Fix lang typo in subject. Best regards, Krzysztof Krzysztof Kozlowski (7): dt-bindings: soundwire: qcom: add Qualcomm Soundwire v2.0.0 dt-bindings: soundwire: qcom: add 16-bit sample interval soundwire: qcom: allow 16-bit sample interval for ports soundwire: qcom: use consistently 'ctrl' as state variable name soundwire: qcom: prepare for handling different register layouts soundwire: qcom: add support for v2.0.0 controller soundwire: qcom: use tabs for indentation in defines .../bindings/soundwire/qcom,soundwire.yaml | 39 +- drivers/soundwire/qcom.c | 387 ++++++++++++------ 2 files changed, 287 insertions(+), 139 deletions(-) -- 2.34.1

3 10

[PATCH v2 1/5] ASoC: tas2781: Add Header file for tas2781 driver
by Shenghao Ding 08 May '23

08 May '23

Create Header file for tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v2: - fixed issue | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202305022033.LiI7Ojm4-lkp@intel.com/ Changes to be committed: new file: include/sound/tas2781-dsp.h new file: include/sound/tas2781-tlv.h new file: include/sound/tas2781.h --- include/sound/tas2781-dsp.h | 189 ++++++++++++++++++++++++++++++++++++ include/sound/tas2781-tlv.h | 22 +++++ include/sound/tas2781.h | 176 +++++++++++++++++++++++++++++++++ 3 files changed, 387 insertions(+) create mode 100644 include/sound/tas2781-dsp.h create mode 100644 include/sound/tas2781-tlv.h create mode 100644 include/sound/tas2781.h diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h new file mode 100644 index 000000000000..091c3ffade17 --- /dev/null +++ b/include/sound/tas2781-dsp.h @@ -0,0 +1,189 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + int nr_retry; + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; + +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +void tasdevice_select_cfg_blk(void *context, int conf_no, + unsigned char block_type); +void tasdevice_config_info_remove(void *context); +void tasdevice_dsp_remove(void *context); +int tasdevice_dsp_parser(void *context); +int tasdevice_rca_parser(void *context, const struct firmware *fmw); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); +int tasdevice_prmg_load(void *context, int prm_no); +int tasdevice_prmg_calibdata_load(void *context, int prm_no); +void tasdevice_tuning_switch(void *context, int state); +int tas2781_load_calibration(void *context, char *file_name, + enum channel i); + +#endif diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h new file mode 100644 index 000000000000..f4310dce655a --- /dev/null +++ b/include/sound/tas2781-tlv.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_TLV_H__ +#define __TAS2781_TLV_H__ + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +#endif /* __TAS2781_LIB_H__ */ diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h new file mode 100644 index 000000000000..c98955bda07e --- /dev/null +++ b/include/sound/tas2781.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include <linux/kernel.h> +#include "tas2781-dsp.h" + +/* version number */ +#define TAS2781_DRV_VER 1 +#define SMARTAMP_MODULE_NAME "tas2781" +#define TAS2781_GLOBAL_ADDR 0x40 +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) (reg % (256 * 128)) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + +/*Software Reset */ +#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2781_REG_SWRESET_RESET BIT(0) + +/* Enable Global addresses */ +#define TAS2781_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2781_GLOBAL_ADDR_MASK BIT(1) +#define TAS2781_GLOBAL_ADDR_ENABLE BIT(1) + +/*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +struct tasdevice { + struct tasdevice_fw *cali_data_fmw; + unsigned int dev_addr; + unsigned int err_code; + unsigned char cur_book; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + int ref_cnt; + unsigned int dev_addr; + unsigned char cur_book; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct calidata { + unsigned char *data; + unsigned long total_sz; +}; + +struct tasdevice_priv { + struct tasdevice tasdevice[max_chn]; + struct tasdevice_irqinfo irq_info; + struct global_addr glb_addr; + struct tasdevice_rca rcabin; + struct tasdevice_fw *fmw; + struct regmap *regmap; + struct mutex codec_lock; + struct calidata cali_data; + struct gpio_desc *reset; + struct device *dev; + struct tm tm; + + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char coef_binaryname[64]; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + unsigned char ndev; + unsigned int magic_num; + unsigned int chip_id; + unsigned int sysclk; + const char *acpi_subsystem_id; + int index; + int cur_prog; + int cur_conf; + int fw_state; + void *client; + void *codec; + bool isacpi; + bool playback_started; + void (*set_global_mode)(struct tasdevice_priv *tas_priv); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block); +}; + +void tas2781_reset(struct tasdevice_priv *tas_dev); +int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, + void (*cont)(const struct firmware *fw, void *context)); +struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c); +int tasdevice_init(struct tasdevice_priv *tas_priv); +void tasdevice_remove(struct tasdevice_priv *tas_priv); +int tasdevice_dev_read(struct tasdevice_priv *tas_priv, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_dev_write(struct tasdevice_priv *tas_priv, + enum channel chn, unsigned int reg, unsigned int value); +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_priv, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); +int tasdevice_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); + +#endif /* __TAS2781_H__ */ -- 2.34.1

2 1

[PATCH] ALSA: hda/realtek: Add quirk for ASUS GU603ZM
by frshuov＠163.com 08 May '23

08 May '23

From: Larry Chi <frshuov(a)163.com> ASUS ROG Zephyrus M16 2022 GU603ZM (1043:1c62) added SND_PCI_QUIRK for speaker and headset-mic working properly Signed-off-by: Larry Chi <frshuov(a)163.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 172ffc2c332b..374a9755d19a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9522,6 +9522,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603ZM", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), -- 2.40.1

2 1

[PATCH] ALSA: hda/realtek: Add a quirk for HP EliteDesk 805
by Ai Chao 08 May '23

08 May '23

Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound. Signed-off-by: Ai Chao <aichao(a)kylinos.cn> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 068ce0db9562..cbb3c3f6d502 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11662,6 +11662,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x103c, 0x870c, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB), + SND_PCI_QUIRK(0x103c, 0x872b, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), -- 2.25.1

2 1

[PATCH v2 0/1] ALSA: hda/realtek: Add quirk for 2nd ASUS GU603
by Luke D. Jones 08 May '23

08 May '23

Add quirk for GU603 with alt codec ID. Changelog: - V2 - Move line to correct place in order Luke D. Jones (1): ALSA: hda/realtek: Add quirk for 2nd ASUS GU603 sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) -- 2.40.0

2 2

[PATCH] ALSA: hda/realtek: Add quirk for Clevo L140AU
by Tim Crawford 08 May '23

08 May '23

From: Jeremy Soller <jeremy(a)system76.com> Fixes headset detection on Clevo L140AU. Signed-off-by: Jeremy Soller <jeremy(a)system76.com> Signed-off-by: Tim Crawford <tcrawford(a)system76.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 068ce0db9562..570f3478c4e7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9617,6 +9617,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x7716, "Clevo NS50PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x7717, "Clevo NS70PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x7718, "Clevo L140PU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x7724, "Clevo L140AU", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), -- 2.40.1

2 1

[PATCH v2 5/5] ALSA: hda/tas2781: Add tas2781 HDA driver
by Shenghao Ding 08 May '23

08 May '23

Create tas2781 HDA driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v2: - fixed issue | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202305022033.LiI7Ojm4-lkp@intel.com/ Changes to be committed: modified: sound/pci/hda/Kconfig modified: sound/pci/hda/Makefile modified: sound/pci/hda/patch_realtek.c new file: sound/pci/hda/tas2781_hda_i2c.c --- sound/pci/hda/Kconfig | 15 + sound/pci/hda/Makefile | 2 + sound/pci/hda/patch_realtek.c | 106 ++++- sound/pci/hda/tas2781_hda_i2c.c | 806 ++++++++++++++++++++++++++++++++ 4 files changed, 926 insertions(+), 3 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda_i2c.c diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 886255a03e8b..e66257277492 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -130,6 +130,21 @@ config SND_HDA_SCODEC_CS35L41_SPI comment "Set to Y if you want auto-loading the side codec driver" depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_SPI=m +config SND_HDA_SCODEC_TAS2781_I2C + tristate "Build TAS2781 HD-audio side codec support for I2C Bus" + depends on I2C + depends on ACPI + depends on SND_SOC + select SND_SOC_TAS2781_COMLIB + select SND_SOC_TAS2781_FMWLIB + select CRC32_SARWATE + help + Say Y or M here to include TAS2781 I2C HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m + config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 00d306104484..1c76609690d6 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -32,6 +32,7 @@ snd-hda-scodec-cs35l41-objs := cs35l41_hda.o snd-hda-scodec-cs35l41-i2c-objs := cs35l41_hda_i2c.o snd-hda-scodec-cs35l41-spi-objs := cs35l41_hda_spi.o snd-hda-cs-dsp-ctls-objs := hda_cs_dsp_ctl.o +snd-hda-scodec-tas2781-i2c-objs := tas2781_hda_i2c.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o @@ -56,6 +57,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L41) += snd-hda-scodec-cs35l41.o obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_I2C) += snd-hda-scodec-cs35l41-i2c.o obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_SPI) += snd-hda-scodec-cs35l41-spi.o obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o # this must be the last entry after codec drivers; # otherwise the codec patches won't be hooked before the PCI probe diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 172ffc2c332b..f5b912f90018 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6705,7 +6705,7 @@ static void comp_generic_playback_hook(struct hda_pcm_stream *hinfo, struct hda_ } } -struct cs35l41_dev_name { +struct scodec_dev_name { const char *bus; const char *hid; int index; @@ -6714,7 +6714,7 @@ struct cs35l41_dev_name { /* match the device name in a slightly relaxed manner */ static int comp_match_cs35l41_dev_name(struct device *dev, void *data) { - struct cs35l41_dev_name *p = data; + struct scodec_dev_name *p = data; const char *d = dev_name(dev); int n = strlen(p->bus); char tmp[32]; @@ -6730,12 +6730,31 @@ static int comp_match_cs35l41_dev_name(struct device *dev, void *data) return !strcmp(d + n, tmp); } +static int comp_match_tas2781_dev_name(struct device *dev, void *data) +{ + struct scodec_dev_name *p = data; + const char *d = dev_name(dev); + int n = strlen(p->bus); + char tmp[32]; + + /* check the bus name */ + if (strncmp(d, p->bus, n)) + return 0; + /* skip the bus number */ + if (isdigit(d[n])) + n++; + /* the rest must be exact matching */ + snprintf(tmp, sizeof(tmp), "-%s:00", p->hid); + + return !strcmp(d + n, tmp); +} + static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char *bus, const char *hid, int count) { struct device *dev = hda_codec_dev(cdc); struct alc_spec *spec = cdc->spec; - struct cs35l41_dev_name *rec; + struct scodec_dev_name *rec; int ret, i; switch (action) { @@ -6760,6 +6779,40 @@ static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char } } +static void tas2781_generic_fixup(struct hda_codec *cdc, int action, + const char *bus, const char *hid, int count) +{ + struct device *dev = hda_codec_dev(cdc); + struct alc_spec *spec = cdc->spec; + struct scodec_dev_name *rec; + int ret, i; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + for (i = 0; i < count; i++) { + rec = devm_kmalloc(dev, sizeof(*rec), GFP_KERNEL); + if (!rec) + return; + rec->bus = bus; + rec->hid = hid; + rec->index = i; + spec->comps[i].codec = cdc; + component_match_add(dev, &spec->match, + comp_match_tas2781_dev_name, rec); + } + ret = component_master_add_with_match(dev, &comp_master_ops, + spec->match); + if (ret) + codec_err(cdc, + "Fail to register component aggregator %d\n", + ret); + else + spec->gen.pcm_playback_hook = + comp_generic_playback_hook; + break; + } +} + static void cs35l41_fixup_i2c_two(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { cs35l41_generic_fixup(cdc, action, "i2c", "CSC3551", 2); @@ -6787,6 +6840,12 @@ static void alc287_fixup_legion_16ithg6_speakers(struct hda_codec *cdc, const st cs35l41_generic_fixup(cdc, action, "i2c", "CLSA0101", 2); } +static void tas2781_fixup_i2c(struct hda_codec *cdc, + const struct hda_fixup *fix, int action) +{ + tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781", 1); +} + /* for alc295_fixup_hp_top_speakers */ #include "hp_x360_helper.c" @@ -7201,6 +7260,8 @@ enum { ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS, ALC236_FIXUP_DELL_DUAL_CODECS, + ALC287_FIXUP_TAS2781_I2C_2, + ALC287_FIXUP_TAS2781_I2C_4 }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -9189,6 +9250,18 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, }, + [ALC287_FIXUP_TAS2781_I2C_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_i2c, + .chained = true, + .chain_id = ALC269_FIXUP_THINKPAD_ACPI, + }, + [ALC287_FIXUP_TAS2781_I2C_4] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_i2c, + .chained = true, + .chain_id = ALC269_FIXUP_THINKPAD_ACPI, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -9725,6 +9798,33 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6), SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), + SND_PCI_QUIRK(0x17aa, 0x387d, "Yoga S780-16 pro Quad AAC", + ALC287_FIXUP_TAS2781_I2C_4), + SND_PCI_QUIRK(0x17aa, 0x387e, "Yoga S780-16 pro Quad YC", + ALC287_FIXUP_TAS2781_I2C_4), + SND_PCI_QUIRK(0x17aa, 0x3881, "YB9 dual powe mode2 YC", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x3884, "Y780 YG DUAL", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x3886, "Y780 VECO DUAL", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38a7, "Y780P AMD YG dual", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38a8, "Y780P AMD VECO dual", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38ba, "Yoga S780-14.5 Air AMD quad YC", + ALC287_FIXUP_TAS2781_I2C_4), + SND_PCI_QUIRK(0x17aa, 0x38bb, "Yoga S780-14.5 Air AMD quad AAC", + ALC287_FIXUP_TAS2781_I2C_4), + SND_PCI_QUIRK(0x17aa, 0x38be, "Yoga S980-14.5 proX YC Dual", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38bf, "Yoga S980-14.5 proX LX Dual", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38c3, "Y980 DUAL", ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38cb, "Y790 YG DUAL", + ALC287_FIXUP_TAS2781_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38cd, "Y790 VECO DUAL", + ALC287_FIXUP_TAS2781_I2C_2), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c new file mode 100644 index 000000000000..a742805b749b --- /dev/null +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -0,0 +1,806 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA I2C driver +// +// Copyright 2023 Texas Instruments, Inc. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> + +#include <linux/acpi.h> +#include <linux/crc8.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <sound/hda_codec.h> +#include <sound/soc.h> +#include <sound/tas2781.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "hda_local.h" +#include "hda_auto_parser.h" +#include "hda_component.h" +#include "hda_jack.h" +#include "hda_generic.h" + +#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 + +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ + SNDRV_CTL_ELEM_ACCESS_READWRITE,\ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_range, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = xreg, .rreg = xreg, .shift = xshift, \ + .rshift = xshift, .min = xmin, .max = xmax, \ + .invert = xinvert} } + +enum calib_data { + R0_VAL = 0, + INV_R0, + R0LOW, + POWER, + TLIM, + CALIB_MAX +}; + +static int tas2781_acpi_get_i2c_resource(struct acpi_resource + *ares, void *data) +{ + struct tasdevice_priv *tas_priv = (struct tasdevice_priv *)data; + struct acpi_resource_i2c_serialbus *sb; + + if (i2c_acpi_get_i2c_resource(ares, &sb)) { + if (sb->slave_address != TAS2781_GLOBAL_ADDR) { + tas_priv->tasdevice[tas_priv->ndev].dev_addr = + (unsigned int) sb->slave_address; + tas_priv->ndev++; + } else + tas_priv->glb_addr.dev_addr = TAS2781_GLOBAL_ADDR; + + } + + return 1; +} + +static int tas2781_hda_read_acpi(struct tasdevice_priv *tas_priv, + const char *hid) +{ + struct acpi_device *adev; + struct device *physdev; + LIST_HEAD(resources); + const char *sub; + int ret; + + adev = acpi_dev_get_first_match_dev(hid, NULL, -1); + if (!adev) { + dev_err(tas_priv->dev, + "Failed to find an ACPI device for %s\n", hid); + return -ENODEV; + } + strcpy(tas_priv->dev_name, hid); + physdev = get_device(acpi_get_first_physical_node(adev)); + acpi_dev_put(adev); + + sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev)); + if (IS_ERR(sub)) + sub = NULL; + dev_info(tas_priv->dev, "subid = %s\n", sub); + + tas_priv->acpi_subsystem_id = sub; + + ret = acpi_dev_get_resources(adev, &resources, + tas2781_acpi_get_i2c_resource, tas_priv); + if (ret < 0) + goto err; + acpi_dev_free_resource_list(&resources); + + put_device(physdev); + dev_info(tas_priv->dev, "global addr: 0x%02x devcnt = %d\n", + tas_priv->glb_addr.dev_addr, tas_priv->ndev); + + return 0; + +err: + dev_err(tas_priv->dev, "Failed acpi ret: %d\n", ret); + put_device(physdev); + + return ret; +} + +static void tas2781_hda_playback_hook(struct device *dev, int action) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret = 0; + + dev_info(tas_priv->dev, "%s: action = %d\n", __func__, action); + switch (action) { + case HDA_GEN_PCM_ACT_OPEN: + pm_runtime_get_sync(dev); + mutex_lock(&tas_priv->codec_lock); + tas_priv->cur_conf = 0; + tas_priv->rcabin.profile_cfg_id = 1; + tasdevice_tuning_switch(tas_priv, 0); + mutex_unlock(&tas_priv->codec_lock); + break; + case HDA_GEN_PCM_ACT_CLOSE: + mutex_lock(&tas_priv->codec_lock); + tasdevice_tuning_switch(tas_priv, 1); + mutex_unlock(&tas_priv->codec_lock); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + break; + default: + dev_warn(tas_priv->dev, "Playback action not supported: %d\n", + action); + break; + } + + if (ret) + dev_err(tas_priv->dev, "Regmap access fail: %d\n", ret); +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_priv->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + tas_priv->rcabin.profile_cfg_id = ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_create_control(struct tasdevice_priv *tas_priv) +{ + char prof_ctrl_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + struct hda_codec *codec = tas_priv->codec; + struct snd_kcontrol_new prof_ctrl = { + .name = prof_ctrl_name, + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, + }; + int ret; + + /* Create a mixer item for selecting the active profile */ + scnprintf(prof_ctrl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "tasdev-profile-id"); + ret = snd_ctl_add(codec->card, snd_ctl_new1(&prof_ctrl, tas_priv)); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + prof_ctrl.name, ret); + goto out; + } + + dev_dbg(tas_priv->dev, "Added Control %s\n", prof_ctrl.name); + +out: + return ret; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct tasdevice_fw *tas_fw = tas_priv->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct tasdevice_fw *tas_fw = tas_priv->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + unsigned int nr_program = ucontrol->value.integer.value[0]; + + tas_priv->cur_prog = nr_program; + + return 1; +} + +static int tasdevice_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_conf; + + return 0; +} + +static int tasdevice_config_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + unsigned int nr_configuration = ucontrol->value.integer.value[0]; + + tas_priv->cur_conf = nr_configuration; + + return 1; +} + +/** + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the + * register. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_digital_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_amp_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_digital_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_amp_putvol(tas_priv, ucontrol, mc); +} + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + ACARD_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_dsp_create_ctrls(struct tasdevice_priv + *tas_priv) +{ + char prog_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + char conf_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + struct hda_codec *codec = tas_priv->codec; + struct snd_kcontrol_new prog_ctl = { + .name = prog_name, + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, + }; + struct snd_kcontrol_new conf_ctl = { + .name = conf_name, + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_configurations, + .get = tasdevice_config_get, + .put = tasdevice_config_put, + }; + int ret; + + scnprintf(prog_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "tasdev-prog-id"); + scnprintf(conf_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "tasdev-conf-id"); + + ret = snd_ctl_add(codec->card, snd_ctl_new1(&prog_ctl, tas_priv)); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + prog_ctl.name, ret); + goto out; + } + + dev_dbg(tas_priv->dev, "Added Control %s\n", prog_ctl.name); + + ret = snd_ctl_add(codec->card, snd_ctl_new1(&conf_ctl, tas_priv)); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + conf_ctl.name, ret); + goto out; + } + + dev_dbg(tas_priv->dev, "Added Control %s\n", conf_ctl.name); +out: + return ret; +} + +static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) +{ + unsigned char page_array[CALIB_MAX] = {0x17, 0x18, 0x18, 0x0d, 0x18}; + unsigned char rgno_array[CALIB_MAX] = {0x74, 0x0c, 0x14, 0x3c, 0x7c}; + unsigned char *data; + int i, j, rc; + + for (i = 0; i < tas_priv->ndev; i++) { + data = tas_priv->cali_data.data + + i * TASDEVICE_SPEAKER_CALIBRATION_SIZE; + for (j = 0; j < CALIB_MAX; j++) { + rc = tasdevice_dev_bulk_write(tas_priv, i, + TASDEVICE_REG(0, page_array[j], rgno_array[j]), + &(data[4 * j]), 4); + if (rc < 0) + dev_err(tas_priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + i, j, rc); + } + } +} + +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, + 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct hda_codec *codec = tas_priv->codec; + unsigned int subid = codec->core.subsystem_id & 0xFFFF; + struct tm *tm = &tas_priv->tm; + unsigned int attr, crc; + unsigned int *tmp_val; + efi_status_t status; + int ret = 0; + + //Lenovo devices + if ((subid == 0x387d) || (subid == 0x387e) || (subid == 0x3881) + || (subid == 0x3884) || (subid == 0x3886) || (subid == 0x38a7) + || (subid == 0x38a8) || (subid == 0x38ba) || (subid == 0x38bb) + || (subid == 0x38be) || (subid == 0x38bf) || (subid == 0x38c3) + || (subid == 0x38cb) || (subid == 0x38cd)) + efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09, + 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + tas_priv->cali_data.total_sz = 0; + /* Get real size of UEFI variable */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, tas_priv->cali_data.data); + if (status == EFI_BUFFER_TOO_SMALL) { + ret = -ENODEV; + /* Allocate data buffer of data_size bytes */ + tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + tas_priv->cali_data.total_sz, GFP_KERNEL); + if (!tas_priv->cali_data.data) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, + tas_priv->cali_data.data); + if (status != EFI_SUCCESS) { + ret = -EINVAL; + goto out; + } + } + + tmp_val = (unsigned int *)tas_priv->cali_data.data; + + crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0; + dev_info(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", + crc, tmp_val[21]); + + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + dev_info(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + tas2781_apply_calib(tas_priv); + } +out: + return ret; +} + +static void tasdevice_fw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_priv = (struct tasdevice_priv *)context; + struct hda_codec *codec = tas_priv->codec; + int i, ret = 0; + + pm_runtime_get_sync(tas_priv->dev); + mutex_lock(&tas_priv->codec_lock); + + ret = tasdevice_rca_parser(tas_priv, fmw); + if (ret) + goto out; + tasdevice_create_control(tas_priv); + + for (i = 0; i < ARRAY_SIZE(tas2781_snd_controls); i++) { + ret = snd_ctl_add(codec->card, + snd_ctl_new1(&tas2781_snd_controls[i], tas_priv)); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_snd_controls[i].name, ret); + goto out; + } + } + + tasdevice_dsp_remove(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%04X.bin", + codec->core.subsystem_id & 0xffff); + ret = tasdevice_dsp_parser(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dspfw load %s error\n", + tas_priv->coef_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + tasdevice_dsp_create_ctrls(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tasdevice_prmg_load(tas_priv, 0); + tas_priv->cur_prog = 0; + + /* If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + tas2781_save_calibration(tas_priv); + +out: + if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { + /*If DSP FW fail, kcontrol won't be created */ + tasdevice_config_info_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); + } + mutex_unlock(&tas_priv->codec_lock); + if (fmw) + release_firmware(fmw); + pm_runtime_mark_last_busy(tas_priv->dev); + pm_runtime_put_autosuspend(tas_priv->dev); +} + +static int tas2781_hda_bind(struct device *dev, struct device *master, + void *master_data) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + struct hda_component *comps = master_data; + int ret = 0; + + if (!comps || tas_priv->index < 0 || + tas_priv->index >= HDA_MAX_COMPONENTS) + return -EINVAL; + + comps = &comps[tas_priv->index]; + if (comps->dev) + return -EBUSY; + + pm_runtime_get_sync(dev); + + comps->dev = dev; + + strscpy(comps->name, dev_name(dev), sizeof(comps->name)); + + ret = tascodec_init(tas_priv, comps->codec, tasdevice_fw_ready); + + comps->playback_hook = tas2781_hda_playback_hook; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static void tas2781_hda_unbind(struct device *dev, + struct device *master, void *master_data) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + struct hda_component *comps = master_data; + + if (comps[tas_priv->index].dev == dev) + memset(&comps[tas_priv->index], 0, sizeof(*comps)); + + tasdevice_config_info_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static const struct component_ops tas2781_hda_comp_ops = { + .bind = tas2781_hda_bind, + .unbind = tas2781_hda_unbind, +}; + +static void tas2781_hda_remove(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + pm_runtime_get_sync(tas_priv->dev); + pm_runtime_disable(tas_priv->dev); + + + component_del(tas_priv->dev, &tas2781_hda_comp_ops); + + pm_runtime_put_noidle(tas_priv->dev); + + tasdevice_remove(tas_priv); +} + +static int tas2781_hda_i2c_probe(struct i2c_client *clt) +{ + struct tasdevice_priv *tas_priv; + const char *device_name; + int ret; + + if (strstr(dev_name(&clt->dev), "TIAS2781")) + device_name = "TIAS2781"; + else + return -ENODEV; + + tas_priv = tasdevice_kzalloc(clt); + if (!tas_priv) + return -ENOMEM; + + tas_priv->irq_info.irq = clt->irq; + ret = tas2781_hda_read_acpi(tas_priv, device_name); + if (ret) + return dev_err_probe(tas_priv->dev, ret, + "Platform not supported\n"); + + ret = tasdevice_init(tas_priv); + if (ret) + goto err; + + pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000); + pm_runtime_use_autosuspend(tas_priv->dev); + pm_runtime_mark_last_busy(tas_priv->dev); + pm_runtime_set_active(tas_priv->dev); + pm_runtime_get_noresume(tas_priv->dev); + pm_runtime_enable(tas_priv->dev); + + pm_runtime_put_autosuspend(tas_priv->dev); + + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops); + if (ret) { + dev_err(tas_priv->dev, "Register component failed: %d\n", ret); + pm_runtime_disable(tas_priv->dev); + } + +err: + if (ret) + tas2781_hda_remove(&clt->dev); + return ret; +} + +static void tas2781_hda_i2c_remove(struct i2c_client *clt) +{ + tas2781_hda_remove(&clt->dev); +} + +static int tas2781_runtime_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int i, ret = 0; + + dev_info(tas_priv->dev, "Runtime Suspend\n"); + + mutex_lock(&tas_priv->codec_lock); + + if (tas_priv->playback_started) { + tasdevice_tuning_switch(tas_priv, 1); + tas_priv->playback_started = false; + } + + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + for (i = 0; i < tas_priv->ndev; i++) { + tas_priv->tasdevice[i].cur_book = -1; + tas_priv->tasdevice[i].cur_prog = -1; + tas_priv->tasdevice[i].cur_conf = -1; + } + + regcache_cache_only(tas_priv->regmap, true); + regcache_mark_dirty(tas_priv->regmap); + + mutex_unlock(&tas_priv->codec_lock); + + return ret; +} + +static int tas2781_runtime_resume(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long calib_data_sz = + tas_priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE; + int ret = 0; + + dev_info(tas_priv->dev, "Runtime Resume\n"); + + mutex_lock(&tas_priv->codec_lock); + + regcache_cache_only(tas_priv->regmap, false); + ret = regcache_sync(tas_priv->regmap); + if (ret) { + dev_err(tas_priv->dev, + "Failed to restore register cache: %d\n", ret); + goto out; + } + + tasdevice_prmg_load(tas_priv, 0); + tas_priv->cur_prog = 0; + + /* If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + if (tas_priv->cali_data.total_sz > calib_data_sz) + tas2781_apply_calib(tas_priv); + +out: + mutex_unlock(&tas_priv->codec_lock); + + return ret; +} + +static int tas2781_system_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + dev_info(tas_priv->dev, "System Suspend\n"); + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + + /* Shutdown chip before system suspend */ + regcache_cache_only(tas_priv->regmap, false); + tasdevice_tuning_switch(tas_priv, 1); + regcache_cache_only(tas_priv->regmap, true); + regcache_mark_dirty(tas_priv->regmap); + /* + * Reset GPIO may be shared, so cannot reset here. + * However beyond this point, amps may be powered down. + */ + return 0; +} + +static int tas2781_system_resume(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long calib_data_sz = + tas_priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE; + int i, ret; + + dev_info(tas_priv->dev, "System Resume\n"); + + ret = pm_runtime_force_resume(dev); + + mutex_lock(&tas_priv->codec_lock); + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + for (i = 0; i < tas_priv->ndev; i++) { + tas_priv->tasdevice[i].cur_book = -1; + tas_priv->tasdevice[i].cur_prog = -1; + tas_priv->tasdevice[i].cur_conf = -1; + } + tas2781_reset(tas_priv); + tasdevice_prmg_load(tas_priv, 0); + tas_priv->cur_prog = 0; + + /* If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + if (tas_priv->cali_data.total_sz > calib_data_sz) + tas2781_apply_calib(tas_priv); + mutex_unlock(&tas_priv->codec_lock); + + return ret; +} + +static const struct dev_pm_ops tas2781_hda_pm_ops = { + RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, + NULL) + SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume) +}; + +static const struct i2c_device_id tas2781_hda_i2c_id[] = { + { "tas2781-hda", 0 }, + {} +}; + +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TIAS2781", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); + +static struct i2c_driver tas2781_hda_i2c_driver = { + .driver = { + .name = "tas2781-hda", + .acpi_match_table = tas2781_acpi_hda_match, + .pm = &tas2781_hda_pm_ops, + }, + .id_table = tas2781_hda_i2c_id, + .probe_new = tas2781_hda_i2c_probe, + .remove = tas2781_hda_i2c_remove, +}; +module_i2c_driver(tas2781_hda_i2c_driver); + +MODULE_DESCRIPTION("TAS2781 HDA Driver"); +MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding(a)ti.com>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB); -- 2.34.1

1 0