The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals.

Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

---

Changes since v2: 1. Use uint16 for qcom,ports-sinterval. DTS will be fixed in separate patchset. 2. Add tags. --- .../bindings/soundwire/qcom,soundwire.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 98c7fc7e1189..fb44b89a754e 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -86,7 +86,7 @@ properties: qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Sample interval low of each data port. + Sample interval (only lowest byte) of each data port. Out ports followed by In ports. Used for Sample Interval calculation. Value of 0xff indicates that this option is not implemented or applicable for the respective data port. @@ -94,6 +94,17 @@ properties: minItems: 3 maxItems: 16

+ qcom,ports-sinterval: + $ref: /schemas/types.yaml#/definitions/uint16-array + description: + Sample interval of each data port. + Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xffff indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 16 + qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -220,10 +231,15 @@ required: - '#size-cells' - qcom,dout-ports - qcom,din-ports - - qcom,ports-sinterval-low - qcom,ports-offset1 - qcom,ports-offset2

+oneOf: + - required: + - qcom,ports-sinterval-low + - required: + - qcom,ports-sinterval + additionalProperties: false

examples:

The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals.

Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

---

Changes since v2: 1. Use uint16 for qcom,ports-sinterval. 2. Add tags.

Changes since v1: 1. Drop unneeded semicolon. --- drivers/soundwire/qcom.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index c296e0bf897b..d051dc408532 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -95,6 +95,7 @@ #define SWRM_DP_BLOCK_CTRL2_BANK(n, m) (0x1130 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_PORT_HCTRL_BANK(n, m) (0x1134 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_BLOCK_CTRL3_BANK(n, m) (0x1138 + 0x100 * (n - 1) + 0x40 * m) +#define SWRM_DP_SAMPLECTRL2_BANK(n, m) (0x113C + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1)) #define SWR_MSTR_MAX_REG_ADDR (0x1740)

@@ -131,7 +132,7 @@ enum { };

struct qcom_swrm_port_config { - u8 si; + u16 si; u8 off1; u8 off2; u8 bp_mode; @@ -806,12 +807,20 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,

value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT; value |= pcfg->off2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT; - value |= pcfg->si; + value |= pcfg->si & 0xff;

ret = ctrl->reg_write(ctrl, reg, value); if (ret) goto err;

+ if (pcfg->si > 0xff) { + value = (pcfg->si >> 8) & 0xff; + reg = SWRM_DP_SAMPLECTRL2_BANK(params->port_num, bank); + ret = ctrl->reg_write(ctrl, reg, value); + if (ret) + goto err; + } + if (pcfg->lane_control != SWR_INVALID_PARAM) { reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank); value = pcfg->lane_control; @@ -1185,7 +1194,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) struct device_node *np = ctrl->dev->of_node; u8 off1[QCOM_SDW_MAX_PORTS]; u8 off2[QCOM_SDW_MAX_PORTS]; - u8 si[QCOM_SDW_MAX_PORTS]; + u16 si[QCOM_SDW_MAX_PORTS]; u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, }; u8 hstart[QCOM_SDW_MAX_PORTS]; u8 hstop[QCOM_SDW_MAX_PORTS]; @@ -1193,6 +1202,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) u8 blk_group_count[QCOM_SDW_MAX_PORTS]; u8 lane_control[QCOM_SDW_MAX_PORTS]; int i, ret, nports, val; + bool si_16 = false;

ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);

@@ -1236,9 +1246,14 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) return ret;

ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low", - si, nports); - if (ret) - return ret; + (u8 *)si, nports); + if (ret) { + ret = of_property_read_u16_array(np, "qcom,ports-sinterval", + si, nports); + if (ret) + return ret; + si_16 = true; + }

ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); @@ -1266,7 +1281,10 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)

for (i = 0; i < nports; i++) { /* Valid port number range is from 1-14 */ - ctrl->pconfig[i + 1].si = si[i]; + if (si_16) + ctrl->pconfig[i + 1].si = si[i]; + else + ctrl->pconfig[i + 1].si = ((u8 *)si)[i]; ctrl->pconfig[i + 1].off1 = off1[i]; ctrl->pconfig[i + 1].off2 = off2[i]; ctrl->pconfig[i + 1].bp_mode = bp_mode[i];

The pointer to 'struct qcom_swrm_ctrl' was called sometimes 'swrm' and sometimes 'ctrl' variable. Choose one - 'ctrl' - so the code will be consistent and easier to read.

No functional change.

Reviewed-by: Srinivas Kandagagatla srinivas.kandagatla@linaro.org Tested-by: Srinivas Kandagagatla srinivas.kandagatla@linaro.org Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

---

Changes since v2: 1. Add tags. --- drivers/soundwire/qcom.c | 168 +++++++++++++++++++-------------------- 1 file changed, 84 insertions(+), 84 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index d051dc408532..dad12e9f5478 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -279,14 +279,14 @@ static u32 swrm_get_packed_reg_val(u8 *cmd_id, u8 cmd_data, return val; }

-static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm) +static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *ctrl) { u32 fifo_outstanding_data, value; int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT;

do { /* Check for fifo underflow during read */ - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); fifo_outstanding_data = FIELD_GET(SWRM_RD_CMD_FIFO_CNT_MASK, value);

/* Check if read data is available in read fifo */ @@ -297,39 +297,39 @@ static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm) } while (fifo_retry_count--);

if (fifo_outstanding_data == 0) { - dev_err_ratelimited(swrm->dev, "%s err read underflow\n", __func__); + dev_err_ratelimited(ctrl->dev, "%s err read underflow\n", __func__); return -EIO; }

return 0; }

-static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *swrm) +static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *ctrl) { u32 fifo_outstanding_cmds, value; int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT;

do { /* Check for fifo overflow during write */ - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); fifo_outstanding_cmds = FIELD_GET(SWRM_WR_CMD_FIFO_CNT_MASK, value);

/* Check for space in write fifo before writing */ - if (fifo_outstanding_cmds < swrm->wr_fifo_depth) + if (fifo_outstanding_cmds < ctrl->wr_fifo_depth) return 0;

usleep_range(500, 510); } while (fifo_retry_count--);

- if (fifo_outstanding_cmds == swrm->wr_fifo_depth) { - dev_err_ratelimited(swrm->dev, "%s err write overflow\n", __func__); + if (fifo_outstanding_cmds == ctrl->wr_fifo_depth) { + dev_err_ratelimited(ctrl->dev, "%s err write overflow\n", __func__); return -EIO; }

return 0; }

-static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, +static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data, u8 dev_addr, u16 reg_addr) {

@@ -342,20 +342,20 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, val = swrm_get_packed_reg_val(&cmd_id, cmd_data, dev_addr, reg_addr); } else { - val = swrm_get_packed_reg_val(&swrm->wcmd_id, cmd_data, + val = swrm_get_packed_reg_val(&ctrl->wcmd_id, cmd_data, dev_addr, reg_addr); }

- if (swrm_wait_for_wr_fifo_avail(swrm)) + if (swrm_wait_for_wr_fifo_avail(ctrl)) return SDW_CMD_FAIL_OTHER;

if (cmd_id == SWR_BROADCAST_CMD_ID) - reinit_completion(&swrm->broadcast); + reinit_completion(&ctrl->broadcast);

/* Its assumed that write is okay as we do not get any status back */ - swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val);

- if (swrm->version <= SWRM_VERSION_1_3_0) + if (ctrl->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155);

if (cmd_id == SWR_BROADCAST_CMD_ID) { @@ -363,7 +363,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, * sleep for 10ms for MSM soundwire variant to allow broadcast * command to complete. */ - ret = wait_for_completion_timeout(&swrm->broadcast, + ret = wait_for_completion_timeout(&ctrl->broadcast, msecs_to_jiffies(TIMEOUT_MS)); if (!ret) ret = SDW_CMD_IGNORED; @@ -376,41 +376,41 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, return ret; }

-static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm, +static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, u8 dev_addr, u16 reg_addr, u32 len, u8 *rval) { u32 cmd_data, cmd_id, val, retry_attempt = 0;

- val = swrm_get_packed_reg_val(&swrm->rcmd_id, len, dev_addr, reg_addr); + val = swrm_get_packed_reg_val(&ctrl->rcmd_id, len, dev_addr, reg_addr);

/* * Check for outstanding cmd wrt. write fifo depth to avoid * overflow as read will also increase write fifo cnt. */ - swrm_wait_for_wr_fifo_avail(swrm); + swrm_wait_for_wr_fifo_avail(ctrl);

/* wait for FIFO RD to complete to avoid overflow */ usleep_range(100, 105); - swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); /* wait for FIFO RD CMD complete to avoid overflow */ usleep_range(250, 255);

- if (swrm_wait_for_rd_fifo_avail(swrm)) + if (swrm_wait_for_rd_fifo_avail(ctrl)) return SDW_CMD_FAIL_OTHER;

do { - swrm->reg_read(swrm, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data); rval[0] = cmd_data & 0xFF; cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data);

- if (cmd_id != swrm->rcmd_id) { + if (cmd_id != ctrl->rcmd_id) { if (retry_attempt < (MAX_FIFO_RD_RETRY - 1)) { /* wait 500 us before retry on fifo read failure */ usleep_range(500, 505); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, SWRM_CMD_FIFO_FLUSH); - swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); } retry_attempt++; } else { @@ -419,9 +419,9 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm,

} while (retry_attempt < MAX_FIFO_RD_RETRY);

- dev_err(swrm->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\ + dev_err(ctrl->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\ dev_num: 0x%x, cmd_data: 0x%x\n", - reg_addr, swrm->rcmd_id, dev_addr, cmd_data); + reg_addr, ctrl->rcmd_id, dev_addr, cmd_data);

return SDW_CMD_IGNORED; } @@ -533,39 +533,39 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus)

static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id) { - struct qcom_swrm_ctrl *swrm = dev_id; + struct qcom_swrm_ctrl *ctrl = dev_id; int ret;

- ret = pm_runtime_resume_and_get(swrm->dev); + ret = pm_runtime_resume_and_get(ctrl->dev); if (ret < 0 && ret != -EACCES) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "pm_runtime_resume_and_get failed in %s, ret %d\n", __func__, ret); return ret; }

- if (swrm->wake_irq > 0) { - if (!irqd_irq_disabled(irq_get_irq_data(swrm->wake_irq))) - disable_irq_nosync(swrm->wake_irq); + if (ctrl->wake_irq > 0) { + if (!irqd_irq_disabled(irq_get_irq_data(ctrl->wake_irq))) + disable_irq_nosync(ctrl->wake_irq); }

- pm_runtime_mark_last_busy(swrm->dev); - pm_runtime_put_autosuspend(swrm->dev); + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev);

return IRQ_HANDLED; }

static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) { - struct qcom_swrm_ctrl *swrm = dev_id; + struct qcom_swrm_ctrl *ctrl = dev_id; u32 value, intr_sts, intr_sts_masked, slave_status; u32 i; int devnum; int ret = IRQ_HANDLED; - clk_prepare_enable(swrm->hclk); + clk_prepare_enable(ctrl->hclk);

- swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts); - intr_sts_masked = intr_sts & swrm->intr_mask; + ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + intr_sts_masked = intr_sts & ctrl->intr_mask;

do { for (i = 0; i < SWRM_INTERRUPT_MAX; i++) { @@ -575,80 +575,80 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)

switch (value) { case SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ: - devnum = qcom_swrm_get_alert_slave_dev_num(swrm); + devnum = qcom_swrm_get_alert_slave_dev_num(ctrl); if (devnum < 0) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "no slave alert found.spurious interrupt\n"); } else { - sdw_handle_slave_status(&swrm->bus, swrm->status); + sdw_handle_slave_status(&ctrl->bus, ctrl->status); }

break; case SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED: case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS: - dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n"); - swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status); - if (swrm->slave_status == slave_status) { - dev_dbg(swrm->dev, "Slave status not changed %x\n", + dev_dbg_ratelimited(ctrl->dev, "SWR new slave attached\n"); + ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &slave_status); + if (ctrl->slave_status == slave_status) { + dev_dbg(ctrl->dev, "Slave status not changed %x\n", slave_status); } else { - qcom_swrm_get_device_status(swrm); - qcom_swrm_enumerate(&swrm->bus); - sdw_handle_slave_status(&swrm->bus, swrm->status); + qcom_swrm_get_device_status(ctrl); + qcom_swrm_enumerate(&ctrl->bus); + sdw_handle_slave_status(&ctrl->bus, ctrl->status); } break; case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR bus clsh detected\n", __func__); - swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - swrm->reg_write(swrm, SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; + ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_OVERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO overflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_UNDERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO underflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_WR_CMD_FIFO_OVERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err(ctrl->dev, "%s: SWR write FIFO overflow fifo status %x\n", __func__, value); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); break; case SWRM_INTERRUPT_STATUS_CMD_ERROR: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR CMD error, fifo status 0x%x, flushing fifo\n", __func__, value); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); break; case SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR Port collision detected\n", __func__); - swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION; - swrm->reg_write(swrm, - SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION; + ctrl->reg_write(ctrl, + SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR read enable valid mismatch\n", __func__); - swrm->intr_mask &= + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH; - swrm->reg_write(swrm, - SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->reg_write(ctrl, + SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED: - complete(&swrm->broadcast); + complete(&ctrl->broadcast); break; case SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2: break; @@ -657,19 +657,19 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) case SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP: break; default: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR unknown interrupt value: %d\n", __func__, value); ret = IRQ_NONE; break; } } - swrm->reg_write(swrm, SWRM_INTERRUPT_CLEAR, intr_sts); - swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts); - intr_sts_masked = intr_sts & swrm->intr_mask; + ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, intr_sts); + ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + intr_sts_masked = intr_sts & ctrl->intr_mask; } while (intr_sts_masked);

- clk_disable_unprepare(swrm->hclk); + clk_disable_unprepare(ctrl->hclk); return ret; }

@@ -1301,23 +1301,23 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) #ifdef CONFIG_DEBUG_FS static int swrm_reg_show(struct seq_file *s_file, void *data) { - struct qcom_swrm_ctrl *swrm = s_file->private; + struct qcom_swrm_ctrl *ctrl = s_file->private; int reg, reg_val, ret;

- ret = pm_runtime_resume_and_get(swrm->dev); + ret = pm_runtime_resume_and_get(ctrl->dev); if (ret < 0 && ret != -EACCES) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "pm_runtime_resume_and_get failed in %s, ret %d\n", __func__, ret); return ret; }

for (reg = 0; reg <= SWR_MSTR_MAX_REG_ADDR; reg += 4) { - swrm->reg_read(swrm, reg, &reg_val); + ctrl->reg_read(ctrl, reg, &reg_val); seq_printf(s_file, "0x%.3x: 0x%.2x\n", reg, reg_val); } - pm_runtime_mark_last_busy(swrm->dev); - pm_runtime_put_autosuspend(swrm->dev); + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev);

return 0; @@ -1498,13 +1498,13 @@ static int qcom_swrm_remove(struct platform_device *pdev) return 0; }

-static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm) +static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *ctrl) { int retry = SWRM_LINK_STATUS_RETRY_CNT; int comp_sts;

do { - swrm->reg_read(swrm, SWRM_COMP_STATUS, &comp_sts); + ctrl->reg_read(ctrl, SWRM_COMP_STATUS, &comp_sts);

if (comp_sts & SWRM_FRM_GEN_ENABLED) return true; @@ -1512,7 +1512,7 @@ static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm) usleep_range(500, 510); } while (retry--);

- dev_err(swrm->dev, "%s: link status not %s\n", __func__, + dev_err(ctrl->dev, "%s: link status not %s\n", __func__, comp_sts & SWRM_FRM_GEN_ENABLED ? "connected" : "disconnected");

return false;

Add support for Qualcomm Soundwire Controller with a bit different register layout.

Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

---

Changes since v2: 1. Add tags. --- drivers/soundwire/qcom.c | 65 +++++++++++++++++++++++++++++++++++----- 1 file changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index eac566f168da..90afc8f15b82 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -31,6 +31,7 @@ #define SWRM_VERSION_1_3_0 0x01030000 #define SWRM_VERSION_1_5_1 0x01050001 #define SWRM_VERSION_1_7_0 0x01070000 +#define SWRM_VERSION_2_0_0 0x02000000 #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) @@ -42,6 +43,7 @@ #define SWRM_COMP_PARAMS_DIN_PORTS_MASK GENMASK(9, 5) #define SWRM_COMP_MASTER_ID 0x104 #define SWRM_V1_3_INTERRUPT_STATUS 0x200 +#define SWRM_V2_0_INTERRUPT_STATUS 0x5000 #define SWRM_INTERRUPT_STATUS_RMSK GENMASK(16, 0) #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ BIT(0) #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED BIT(1) @@ -54,24 +56,32 @@ #define SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION BIT(8) #define SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH BIT(9) #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED BIT(10) +#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED BIT(11) +#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL BIT(12) #define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13) #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14) #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16) #define SWRM_INTERRUPT_MAX 17 #define SWRM_V1_3_INTERRUPT_MASK_ADDR 0x204 #define SWRM_V1_3_INTERRUPT_CLEAR 0x208 +#define SWRM_V2_0_INTERRUPT_CLEAR 0x5008 #define SWRM_V1_3_INTERRUPT_CPU_EN 0x210 +#define SWRM_V2_0_INTERRUPT_CPU_EN 0x5004 #define SWRM_V1_3_CMD_FIFO_WR_CMD 0x300 +#define SWRM_V2_0_CMD_FIFO_WR_CMD 0x5020 #define SWRM_V1_3_CMD_FIFO_RD_CMD 0x304 +#define SWRM_V2_0_CMD_FIFO_RD_CMD 0x5024 #define SWRM_CMD_FIFO_CMD 0x308 #define SWRM_CMD_FIFO_FLUSH 0x1 #define SWRM_V1_3_CMD_FIFO_STATUS 0x30C +#define SWRM_V2_0_CMD_FIFO_STATUS 0x5050 #define SWRM_RD_CMD_FIFO_CNT_MASK GENMASK(20, 16) #define SWRM_WR_CMD_FIFO_CNT_MASK GENMASK(12, 8) #define SWRM_CMD_FIFO_CFG_ADDR 0x314 #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31) #define SWRM_RD_WR_CMD_RETRIES 0x7 #define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR 0x318 +#define SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR 0x5040 #define SWRM_RD_FIFO_CMD_ID_MASK GENMASK(11, 8) #define SWRM_ENUMERATOR_CFG_ADDR 0x500 #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m) (0x530 + 0x8 * (m)) @@ -98,6 +108,11 @@ #define SWRM_DP_SAMPLECTRL2_BANK(n, m) (0x113C + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1)) #define SWR_V1_3_MSTR_MAX_REG_ADDR 0x1740 +#define SWR_V2_0_MSTR_MAX_REG_ADDR 0x50ac + +#define SWRM_V2_0_CLK_CTRL 0x5060 +#define SWRM_V2_0_CLK_CTRL_CLK_START BIT(0) +#define SWRM_V2_0_LINK_STATUS 0x5064

#define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10 @@ -243,6 +258,26 @@ static const struct qcom_swrm_data swrm_v1_6_data = { .reg_layout = swrm_v1_3_reg_layout, };

+static const unsigned int swrm_v2_0_reg_layout[] = { + [SWRM_REG_FRAME_GEN_ENABLED] = SWRM_V2_0_LINK_STATUS, + [SWRM_REG_INTERRUPT_STATUS] = SWRM_V2_0_INTERRUPT_STATUS, + [SWRM_REG_INTERRUPT_MASK_ADDR] = 0, /* Not present */ + [SWRM_REG_INTERRUPT_CLEAR] = SWRM_V2_0_INTERRUPT_CLEAR, + [SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V2_0_INTERRUPT_CPU_EN, + [SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V2_0_CMD_FIFO_WR_CMD, + [SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD, + [SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS, + [SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR, +}; + +static const struct qcom_swrm_data swrm_v2_0_data = { + .default_rows = 50, + .default_cols = 16, + .sw_clk_gate_required = true, + .max_reg = SWR_V2_0_MSTR_MAX_REG_ADDR, + .reg_layout = swrm_v2_0_reg_layout, +}; + #define to_qcom_sdw(b) container_of(b, struct qcom_swrm_ctrl, bus)

static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg, @@ -748,18 +783,23 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)

ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK; /* Mask soundwire interrupts */ - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - SWRM_INTERRUPT_STATUS_RMSK); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + SWRM_INTERRUPT_STATUS_RMSK);

/* Configure No pings */ ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val); u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);

- if (ctrl->version >= SWRM_VERSION_1_7_0) { + if (ctrl->version == SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else if (ctrl->version >= SWRM_VERSION_2_0_0) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL, + SWRM_V2_0_CLK_CTRL_CLK_START); } else { ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); } @@ -1609,10 +1649,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr);

- if (ctrl->version >= SWRM_VERSION_1_7_0) { + if (ctrl->version == SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else if (ctrl->version >= SWRM_VERSION_2_0_0) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL, + SWRM_V2_0_CLK_CTRL_CLK_START); } else { ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); } @@ -1620,8 +1664,10 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET);

ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - ctrl->intr_mask); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], ctrl->intr_mask);

@@ -1645,8 +1691,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev) if (!ctrl->clock_stop_not_supported) { /* Mask bus clash interrupt */ ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - ctrl->intr_mask); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], ctrl->intr_mask); /* Prepare slaves for clock stop */ @@ -1684,6 +1732,7 @@ static const struct of_device_id qcom_swrm_of_match[] = { { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, + { .compatible = "qcom,soundwire-v2.0.0", .data = &swrm_v2_0_data }, {/* sentinel */}, };