- Alsa-devel - mailman.alsa-project.org

[PATCH] Enable class-D silence and clock detections
by derek.fang＠realtek.com 29 May '20

29 May '20

From: "derek.fang" <derek.fang(a)realtek.com> Avoid noise under bypass boost mode. Signed-off-by: derek.fang <derek.fang(a)realtek.com> --- sound/soc/codecs/rt1015.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c index 5eb07a4..67e2e94 100644 --- a/sound/soc/codecs/rt1015.c +++ b/sound/soc/codecs/rt1015.c @@ -475,7 +475,7 @@ static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol, snd_soc_component_write(component, RT1015_CLSD_INTERNAL9, 0x0140); snd_soc_component_write(component, - RT1015_GAT_BOOST, 0x00fe); + RT1015_GAT_BOOST, 0x0efe); snd_soc_component_write(component, RT1015_PWR_STATE_CTRL, 0x000d); msleep(500); -- 2.7.4

2 2

[PATCH v2] ASoC: reduce verbosity of error messages for sof-dai and sof-link
by Pierre-Louis Bossart 29 May '20

29 May '20

Recent changes result in multiple dmesg traces such as: [ 14.410435] Audio Port: ASoC: error at snd_soc_link_startup on Audio Port: 1 [ 14.410446] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on media-cpu-dai: 1 These messages are not really errors, when dai and dai-link callbacks return the value of e.g. snd_pcm_hw_constraint_single() the result is "Positive if the value is changed, zero if it's not changed, or a negative error code" Add a simple test to skip the checks for positive returned values Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/soc/soc-dai.c | 6 +++++- sound/soc/soc-link.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index 2c6ac3b0afa5..b05e18b63a1c 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -14,10 +14,14 @@ static inline int _soc_dai_ret(struct snd_soc_dai *dai, const char *func, int ret) { + /* Positive, Zero values are not errors */ + if (ret >= 0) + return ret; + + /* Negative values might be errors */ switch (ret) { case -EPROBE_DEFER: case -ENOTSUPP: - case 0: break; default: dev_err(dai->dev, diff --git a/sound/soc/soc-link.c b/sound/soc/soc-link.c index 248e1be4e1eb..f849278beba0 100644 --- a/sound/soc/soc-link.c +++ b/sound/soc/soc-link.c @@ -12,10 +12,14 @@ static inline int _soc_link_ret(struct snd_soc_pcm_runtime *rtd, const char *func, int ret) { + /* Positive, Zero values are not errors */ + if (ret >= 0) + return ret; + + /* Negative values might be errors */ switch (ret) { case -EPROBE_DEFER: case -ENOTSUPP: - case 0: break; default: dev_err(rtd->dev, base-commit: 4a0434502191347ba8f99468f2fb2cdddc20d381 -- 2.20.1

2 1

[sound:for-next 67/134] sound/usb/mixer_quirks.c:2254:49: sparse: sparse: Using plain integer as NULL pointer
by kbuild test robot 29 May '20

29 May '20

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next head: 8191743d5f9a34c0665046937eff262bffdad9a9 commit: 3e8f3bd047163d30fb1ad32ca7e4628921555c09 [67/134] ALSA: usb-audio: RME Babyface Pro mixer patch config: x86_64-randconfig-s022-20200529 (attached as .config) compiler: gcc-9 (Debian 9.3.0-13) 9.3.0 reproduce: # apt-get install sparse # sparse version: v0.6.1-243-gc100a7ab-dirty git checkout 3e8f3bd047163d30fb1ad32ca7e4628921555c09 # save the attached .config to linux build tree make W=1 C=1 ARCH=x86_64 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' If you fix the issue, kindly add following tag as appropriate Reported-by: kbuild test robot <lkp(a)intel.com> sparse warnings: (new ones prefixed by >>) >> sound/usb/mixer_quirks.c:2254:49: sparse: sparse: Using plain integer as NULL pointer sound/usb/mixer_quirks.c:2393:49: sparse: sparse: Using plain integer as NULL pointer vim +2254 sound/usb/mixer_quirks.c 2224 2225 static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg, 2226 u8 index, u8 value) 2227 { 2228 int err; 2229 u16 usb_req, usb_idx, usb_val; 2230 struct snd_usb_audio *chip = mixer->chip; 2231 2232 err = snd_usb_lock_shutdown(chip); 2233 if (err < 0) 2234 return err; 2235 2236 if (reg == SND_BBFPRO_CTL_REG1) { 2237 usb_req = SND_BBFPRO_USBREQ_CTL_REG1; 2238 if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) { 2239 usb_idx = 3; 2240 usb_val = value ? 3 : 0; 2241 } else { 2242 usb_idx = 1 << index; 2243 usb_val = value ? usb_idx : 0; 2244 } 2245 } else { 2246 usb_req = SND_BBFPRO_USBREQ_CTL_REG2; 2247 usb_idx = 1 << index; 2248 usb_val = value ? usb_idx : 0; 2249 } 2250 2251 err = snd_usb_ctl_msg(chip->dev, 2252 usb_sndctrlpipe(chip->dev, 0), usb_req, 2253 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, > 2254 usb_val, usb_idx, 0, 0); 2255 2256 snd_usb_unlock_shutdown(chip); 2257 return err; 2258 } 2259 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

1 0

[PATCH 0/3] ASoC: Intel: simplify driver/card names for SOF/UCM integration
by Pierre-Louis Bossart 29 May '20

29 May '20

As suggested by Jaroslav, this patchset simplifies legacy cards compiled with SOF: they now expose an 'SOF' driver name and an 'sof-bytcht <codec>' card name. UCM uses this driver name and additionally checks for the card name to load a configuration shared with the SST driver. This patchset is just a rename with no functionality change. There is no modification when SOF is not used, and Kconfig for SOF are disabled when SST is enabled so no risk of interference. I know this is cutting it very close to the merge window but hope that this helps make 5.8 the first kernel version where SOF 'just works'(tm) on legacy platforms with no additional configuration needed (as is already the case with more recent HDaudio+DMIC platforms). Thanks to Jaroslav for all the hard work on the alsa-lib/UCM side (the majority of the configs are already merged in alsa-ucm-conf, only minor updates are in-flight for max98090 and broadwell). Pierre-Louis Bossart (3): ASoC: Intel: byt*: simplify card names for SOF uses ASoC: Intel: cht*: simplify card names for SOF uses ASoC: Intel: broadwell: simplify card names for SOF uses sound/soc/intel/boards/bdw-rt5650.c | 12 +++++++++++- sound/soc/intel/boards/bdw-rt5677.c | 12 +++++++++++- sound/soc/intel/boards/broadwell.c | 12 +++++++++++- sound/soc/intel/boards/bytcht_cx2072x.c | 12 +++++++++++- sound/soc/intel/boards/bytcht_da7213.c | 12 +++++++++++- sound/soc/intel/boards/bytcht_es8316.c | 12 +++++++++++- sound/soc/intel/boards/bytcr_rt5640.c | 12 +++++++++++- sound/soc/intel/boards/bytcr_rt5651.c | 12 +++++++++++- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 12 +++++++++++- sound/soc/intel/boards/cht_bsw_nau8824.c | 12 +++++++++++- sound/soc/intel/boards/cht_bsw_rt5645.c | 17 +++++++++++++++-- sound/soc/intel/boards/cht_bsw_rt5672.c | 12 +++++++++++- 12 files changed, 136 insertions(+), 13 deletions(-) base-commit: 67866ff9b7a7d9d4a3030efaadb079290ebaf967 -- 2.20.1

2 4

Re: [PATCH] Enable class-D silence and clock detections
by Mark Brown 29 May '20

29 May '20

On Fri, May 29, 2020 at 11:22:25AM +0000, Derek [方德義] wrote: > > Please submit patches using subject lines reflecting the style for the > > subsystem, this makes it easier for people to identify relevant patches. > Sorry for the mistake. I will resend the patch. It's OK, no need for this one - just please bear this in mind in future.

1 0

[PATCH] ASoC: reduce verbosity of error messages for sof-dai and sof-link
by Pierre-Louis Bossart 29 May '20

29 May '20

Recent changes result in multiple dmesg traces such as: [ 14.410435] Audio Port: ASoC: error at snd_soc_link_startup on Audio Port: 1 [ 14.410446] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on media-cpu-dai: 1 These messages are not really errors, when dai and dai-link callbacks return the value of e.g. snd_pcm_hw_constraint_single() the result is "Positive if the value is changed, zero if it's not changed, or a negative error code" Add a simple test to only log errors when the result is negative. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/soc/soc-dai.c | 7 ++++--- sound/soc/soc-link.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index 2c6ac3b0afa5..6a0e7560bacc 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -20,9 +20,10 @@ static inline int _soc_dai_ret(struct snd_soc_dai *dai, case 0: break; default: - dev_err(dai->dev, - "ASoC: error at %s on %s: %d\n", - func, dai->name, ret); + if (ret < 0) + dev_err(dai->dev, + "ASoC: error at %s on %s: %d\n", + func, dai->name, ret); } return ret; diff --git a/sound/soc/soc-link.c b/sound/soc/soc-link.c index 248e1be4e1eb..ff053d4c1a49 100644 --- a/sound/soc/soc-link.c +++ b/sound/soc/soc-link.c @@ -18,9 +18,10 @@ static inline int _soc_link_ret(struct snd_soc_pcm_runtime *rtd, case 0: break; default: - dev_err(rtd->dev, - "ASoC: error at %s on %s: %d\n", - func, rtd->dai_link->name, ret); + if (ret < 0) + dev_err(rtd->dev, + "ASoC: error at %s on %s: %d\n", + func, rtd->dai_link->name, ret); } return ret; base-commit: 4a0434502191347ba8f99468f2fb2cdddc20d381 -- 2.20.1

2 2

Re: Subject: [PATCH] ASoC: soc-pcm: fix BE dai not hw_free and shutdown during mixer update
by Mark Brown 29 May '20

29 May '20

On Fri, May 29, 2020 at 12:10:26PM +0800, zhucancan wrote: > +++ b/sound/soc/soc-pcm.c > @@ -2730,12 +2730,12 @@ static int dpcm_run_update_startup(struct snd_soc_pcm_runtime *fe, int stream) > close: > dpcm_be_dai_shutdown(fe, stream); > disconnect: > - /* disconnect any non started BEs */ > + /* disconnect any closed BEs */ Your mailer has corrupted the patch (it looks like it replaced tabs with spaces).

1 0

[V6 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 29 May '20

29 May '20

Add DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changed since V5: * Change txt to yaml and fix up the examples. Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example .../bindings/sound/maxim,max98390.yaml | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98390.yaml diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml new file mode 100644 index 000000000000..1ed4ab9e1c37 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speaker Management + +maintainers: + - Steve Lee <steves.lee(a)maximintegrated.com> + +properties: + compatible: + const: maxim,max98390 + + reg: + maxItems: 1 + description: I2C address of the device. + + temperature_calib: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + + r0_calib: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This is r0 calibration data which was measured in factory mode. + +required: + - compatible + - reg + +examples: + - | + max98390: amplifier@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; + }; -- 2.17.1

3 4

alsa-ucm.c: UCM not available for card sof-bytcr-rt5640
by GitHub issues - opened 29 May '20

29 May '20

alsa-project/alsa-ucm-conf issue #28 was opened from youling257: ( 30.692| 0.006) I: [pulseaudio] (alsa-lib)main.c: error: failed to import hw:0 use case configuration -2 ( 30.693| 0.000) I: [pulseaudio] (alsa-lib)main.c: error: failed to import sof-bytcr-rt5640 use case configuration -2 ( 30.693| 0.000) I: [pulseaudio] alsa-ucm.c: UCM not available for card sof-bytcr-rt5640 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/28 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2 0/4] ASoC: Intel: Add KeemBay ASoC driver
by Sia Jee Heng 29 May '20

29 May '20

The below series of patches support the KeemBay ASoC driver. It enabled the tlv320aic3204 machine driver and the platform driver initialize the i2s to capture and playback the pcm data on the ARM. The i2s is running in polling mode. There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin to perform some Audio preprocessing. Change History: v2: - Corrected I2S naming for DT binding. v1: - Initial version. Sia Jee Heng (4): ASoC: Intel: Add KeemBay platform driver ASoC: Intel: Boards: Add KeemBay machine driver ASoC: Intel: Add makefiles and kconfig changes for KeemBay dt-bindings: sound: Add documentation for KeemBay sound card and i2s .../bindings/sound/intel,keembay-i2s.yaml | 57 ++ .../bindings/sound/intel,keembay-sound-card.yaml | 30 + sound/soc/intel/Kconfig | 7 + sound/soc/intel/Makefile | 1 + sound/soc/intel/boards/Kconfig | 15 + sound/soc/intel/boards/Makefile | 4 + sound/soc/intel/boards/kmb_tlv3204.c | 144 ++++ sound/soc/intel/keembay/Makefile | 4 + sound/soc/intel/keembay/kmb_platform.c | 746 +++++++++++++++++++++ sound/soc/intel/keembay/kmb_platform.h | 145 ++++ 10 files changed, 1153 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-sound-card.yaml create mode 100644 sound/soc/intel/boards/kmb_tlv3204.c create mode 100644 sound/soc/intel/keembay/Makefile create mode 100644 sound/soc/intel/keembay/kmb_platform.c create mode 100644 sound/soc/intel/keembay/kmb_platform.h -- 1.9.1

4 11

ucm2: chtmax98090: add generic HiFi.conf and SOF support
by GitHub pull_request - opened 29 May '20

29 May '20

alsa-project/alsa-ucm-conf pull request #27 was opened from plbossart: Tested on Cyan Chromebook with both SOF and SST drivers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/27 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/27.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ASoC: fsi: Add missing properties to DT bindings
by Geert Uytterhoeven 28 May '20

28 May '20

make dtbs_check: arch/arm/boot/dts/r8a7740-armadillo800eva.dt.yaml: sound@fe1f0000: '#sound-dai-cells', 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' Fix this by documenting the missing properties. Update the example to match reality. While at it, improve the document title, and comment the various compatible values with the corresponding SoC names. Fixes: 7f464532b05dadc8 ("dt-bindings: Add missing 'additionalProperties: false'") Fixes: 2f52475bac7e1572 ("ASoC: fsi: switch to yaml base Documentation") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- For a clean "make dtbs_check", this depends on "ARM: dts: sh73a0: Add missing clocks to sound node" (http://lore.kernel.org/r/20200519075525.24742-1-geert+renesas@glider.be). --- .../bindings/sound/renesas,fsi.yaml | 29 +++++++++++++++---- 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index 91cf4176abd5f78f..8a4406be387a6b61 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/sound/renesas,fsi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas FSI Sound Driver Device Tree Bindings +title: Renesas FIFO-buffered Serial Interface (FSI) maintainers: - Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> @@ -18,8 +18,8 @@ properties: # for FSI2 SoC - items: - enum: - - renesas,fsi2-sh73a0 - - renesas,fsi2-r8a7740 + - renesas,fsi2-sh73a0 # SH-Mobile AG5 + - renesas,fsi2-r8a7740 # R-Mobile A1 - enum: - renesas,sh_fsi2 # for Generic @@ -34,6 +34,15 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + fsia,spdif-connection: $ref: /schemas/types.yaml#/definitions/flag description: FSI is connected by S/PDIF @@ -62,16 +71,24 @@ required: - compatible - reg - interrupts + - clocks + - power-domains + - '#sound-dai-cells' additionalProperties: false examples: - | - sh_fsi2: sound@ec230000 { + #include <dt-bindings/clock/r8a7740-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + sh_fsi2: sound@fe1f0000 { compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; - reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; + reg = <0xfe1f0000 0x400>; + interrupts = <GIC_SPI 9 0x4>; + clocks = <&mstp3_clks R8A7740_CLK_FSI>; + power-domains = <&pd_a4mp>; + #sound-dai-cells = <1>; fsia,spdif-connection; fsia,stream-mode-support; fsia,use-internal-clock; -- 2.17.1

4 4

[PATCH 1/2] dt-bindings: sound: tlv320adcx140: Add GPI config property
by Dan Murphy 28 May '20

28 May '20

Add an array property that configures the General Purpose Input (GPI) register. The device has 4 GPI pins and each pin can be configured in 1 of 7 different ways. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- .../bindings/sound/tlv320adcx140.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index daa6cc0e031b..e8a69b1c7ca9 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -86,6 +86,32 @@ properties: maximum: 1 default: [0, 0, 0, 0] + ti,gpi-config: + description: | + Defines the configuration for the general purpose input pins (GPI). + The array is defined as <GPI1 GPI2 GPI3 GPI4>. + + 0 - (default) disabled + 1 - GPIX is configured as a general-purpose input (GPI) + 2 - GPIX is configured as a master clock input (MCLK) + 3 - GPIX is configured as an ASI input for daisy-chain (SDIN) + 4 - GPIX is configured as a PDM data input for channel 1 and channel + (PDMDIN1) + 5 - GPIX is configured as a PDM data input for channel 3 and channel + (PDMDIN2) + 6 - GPIX is configured as a PDM data input for channel 5 and channel + (PDMDIN3) + 7 - GPIX is configured as a PDM data input for channel 7 and channel + (PDMDIN4) + + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 0, 0] + required: - compatible - reg @@ -101,6 +127,7 @@ examples: reg = <0x4c>; ti,mic-bias-source = <6>; ti,pdm-edge-select = <0 1 0 1>; + ti,gpi-config = <4 5 6 7>; reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; }; -- 2.26.2

3 5

[PATCH] add I2C device and compatible ID
by Seven Lee 28 May '20

28 May '20

The nau8810 driver can also compatible with nau8812 and nau8814. Signed-off-by: Seven Lee <wtli(a)nuvoton.com> --- Documentation/devicetree/bindings/sound/nau8810.txt | 5 +++-- sound/soc/codecs/nau8810.c | 4 ++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt index 05830e477acd..7deaa452b200 100644 --- a/Documentation/devicetree/bindings/sound/nau8810.txt +++ b/Documentation/devicetree/bindings/sound/nau8810.txt @@ -1,10 +1,11 @@ -NAU8810 audio CODEC +NAU8810/NAU8812/NAU8814 audio CODEC This device supports I2C only. Required properties: - - compatible : "nuvoton,nau8810" + - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or + "nuvoton,nau8814" - reg : the I2C address of the device. diff --git a/sound/soc/codecs/nau8810.c b/sound/soc/codecs/nau8810.c index efe9fb3fb225..33ebc6398426 100644 --- a/sound/soc/codecs/nau8810.c +++ b/sound/soc/codecs/nau8810.c @@ -895,6 +895,8 @@ static int nau8810_i2c_probe(struct i2c_client *i2c, static const struct i2c_device_id nau8810_i2c_id[] = { { "nau8810", 0 }, + { "nau8812", 0 }, + { "nau8814", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); @@ -902,6 +904,8 @@ MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); #ifdef CONFIG_OF static const struct of_device_id nau8810_of_match[] = { { .compatible = "nuvoton,nau8810", }, + { .compatible = "nuvoton,nau8812", }, + { .compatible = "nuvoton,nau8814", }, { } }; MODULE_DEVICE_TABLE(of, nau8810_of_match); -- 2.26.2

2 2

[PATCH] ASoC: sta32x: add missed function calls in error paths
by Chuhong Yuan 28 May '20

28 May '20

sta32x_probe() forgets to call undo functions when it fails, add the missed function calls to fix it. Signed-off-by: Chuhong Yuan <hslester96(a)gmail.com> --- sound/soc/codecs/sta32x.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index db4b3ec55311..e9ccebbc31e4 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -893,13 +893,13 @@ static int sta32x_probe(struct snd_soc_component *component) sta32x->supplies); if (ret != 0) { dev_err(component->dev, "Failed to enable supplies: %d\n", ret); - return ret; + goto err_clk_disable_unprepare; } ret = sta32x_startup_sequence(sta32x); if (ret < 0) { dev_err(component->dev, "Failed to startup device\n"); - return ret; + goto err_regulator_bulk_disable; } /* CONFA */ @@ -983,6 +983,13 @@ static int sta32x_probe(struct snd_soc_component *component) regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); return 0; + +err_regulator_bulk_disable: + regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies); +err_clk_disable_unprepare: + if (sta32x->xti_clk) + clk_disable_unprepare(sta32x->xti_clk); + return ret; } static void sta32x_remove(struct snd_soc_component *component) -- 2.26.2

2 1

[PATCH] ASoC: amd: Removing unnecessary instance initialization
by Ravulapati Vishnu vardhan rao 28 May '20

28 May '20

In DMA pointer the initialzation of instance is of no use. In fact it will reinitialize the instance variable which is already opened and functional. Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati(a)amd.com> --- sound/soc/amd/raven/acp3x-pcm-dma.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c index 620b568..d8f554f 100644 --- a/sound/soc/amd/raven/acp3x-pcm-dma.c +++ b/sound/soc/amd/raven/acp3x-pcm-dma.c @@ -303,7 +303,6 @@ static snd_pcm_uframes_t acp3x_dma_pointer(struct snd_soc_component *component, { struct snd_soc_pcm_runtime *prtd; struct snd_soc_card *card; - struct acp3x_platform_info *pinfo; struct i2s_stream_instance *rtd; u32 pos; u32 buffersize; @@ -312,13 +311,6 @@ static snd_pcm_uframes_t acp3x_dma_pointer(struct snd_soc_component *component, prtd = substream->private_data; card = prtd->card; rtd = substream->runtime->private_data; - pinfo = snd_soc_card_get_drvdata(card); - if (pinfo) { - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - rtd->i2s_instance = pinfo->play_i2s_instance; - else - rtd->i2s_instance = pinfo->cap_i2s_instance; - } buffersize = frames_to_bytes(substream->runtime, substream->runtime->buffer_size); -- 2.7.4

2 1

[PATCH] ASoC: ingenic: Unconditionally depend on devicetree
by Paul Cercueil 28 May '20

28 May '20

All boards with Ingenic SoCs probe with devicetree already, we have no use for a non-devicetree path. This solves some compilation warnings that were caused by unused variables in the case where CONFIG_OF was disabled. Signed-off-by: Paul Cercueil <paul(a)crapouillou.net> Reported-by: kbuild test robot <lkp(a)intel.com> --- sound/soc/codecs/Kconfig | 3 +++ sound/soc/codecs/jz4725b.c | 4 +--- sound/soc/codecs/jz4740.c | 4 +--- sound/soc/codecs/jz4770.c | 2 +- sound/soc/jz4740/Kconfig | 2 +- sound/soc/jz4740/jz4740-i2s.c | 4 +--- 6 files changed, 8 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..3a0a6824e278 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -681,6 +681,7 @@ config SND_SOC_CX2072X config SND_SOC_JZ4740_CODEC depends on MIPS || COMPILE_TEST + depends on OF select REGMAP_MMIO tristate "Ingenic JZ4740 internal CODEC" help @@ -692,6 +693,7 @@ config SND_SOC_JZ4740_CODEC config SND_SOC_JZ4725B_CODEC depends on MIPS || COMPILE_TEST + depends on OF select REGMAP tristate "Ingenic JZ4725B internal CODEC" help @@ -703,6 +705,7 @@ config SND_SOC_JZ4725B_CODEC config SND_SOC_JZ4770_CODEC depends on MIPS || COMPILE_TEST + depends on OF select REGMAP tristate "Ingenic JZ4770 internal CODEC" help diff --git a/sound/soc/codecs/jz4725b.c b/sound/soc/codecs/jz4725b.c index 2567a5d15b55..e49374c72e70 100644 --- a/sound/soc/codecs/jz4725b.c +++ b/sound/soc/codecs/jz4725b.c @@ -574,19 +574,17 @@ static int jz4725b_codec_probe(struct platform_device *pdev) return ret; } -#ifdef CONFIG_OF static const struct of_device_id jz4725b_codec_of_matches[] = { { .compatible = "ingenic,jz4725b-codec", }, { } }; MODULE_DEVICE_TABLE(of, jz4725b_codec_of_matches); -#endif static struct platform_driver jz4725b_codec_driver = { .probe = jz4725b_codec_probe, .driver = { .name = "jz4725b-codec", - .of_match_table = of_match_ptr(jz4725b_codec_of_matches), + .of_match_table = jz4725b_codec_of_matches, }, }; module_platform_driver(jz4725b_codec_driver); diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c index 460aa1fd1efe..c9900d1cd5c2 100644 --- a/sound/soc/codecs/jz4740.c +++ b/sound/soc/codecs/jz4740.c @@ -344,19 +344,17 @@ static int jz4740_codec_probe(struct platform_device *pdev) return ret; } -#ifdef CONFIG_OF static const struct of_device_id jz4740_codec_of_matches[] = { { .compatible = "ingenic,jz4740-codec", }, { } }; MODULE_DEVICE_TABLE(of, jz4740_codec_of_matches); -#endif static struct platform_driver jz4740_codec_driver = { .probe = jz4740_codec_probe, .driver = { .name = "jz4740-codec", - .of_match_table = of_match_ptr(jz4740_codec_of_matches), + .of_match_table = jz4740_codec_of_matches, }, }; diff --git a/sound/soc/codecs/jz4770.c b/sound/soc/codecs/jz4770.c index e7cf2c107607..34775aa62402 100644 --- a/sound/soc/codecs/jz4770.c +++ b/sound/soc/codecs/jz4770.c @@ -937,7 +937,7 @@ static struct platform_driver jz4770_codec_driver = { .probe = jz4770_codec_probe, .driver = { .name = "jz4770-codec", - .of_match_table = of_match_ptr(jz4770_codec_of_matches), + .of_match_table = jz4770_codec_of_matches, }, }; module_platform_driver(jz4770_codec_driver); diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index e72f826062e9..29144720cb62 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -2,7 +2,7 @@ config SND_JZ4740_SOC_I2S tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC" depends on MIPS || COMPILE_TEST - depends on HAS_IOMEM + depends on OF && HAS_IOMEM select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 6f6f8dad0356..52460adf6ca1 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -504,7 +504,6 @@ static const struct snd_soc_component_driver jz4740_i2s_component = { .resume = jz4740_i2s_resume, }; -#ifdef CONFIG_OF static const struct of_device_id jz4740_of_matches[] = { { .compatible = "ingenic,jz4740-i2s", .data = &jz4740_i2s_soc_info }, { .compatible = "ingenic,jz4760-i2s", .data = &jz4760_i2s_soc_info }, @@ -513,7 +512,6 @@ static const struct of_device_id jz4740_of_matches[] = { { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, jz4740_of_matches); -#endif static int jz4740_i2s_dev_probe(struct platform_device *pdev) { @@ -558,7 +556,7 @@ static struct platform_driver jz4740_i2s_driver = { .probe = jz4740_i2s_dev_probe, .driver = { .name = "jz4740-i2s", - .of_match_table = of_match_ptr(jz4740_of_matches) + .of_match_table = jz4740_of_matches, }, }; -- 2.26.2

2 1

[PATCH v2] ASoC: rt5682: split i2c driver into separate module
by Arnd Bergmann 28 May '20

28 May '20

With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the driver, we can easily get a build failure when I2C is built-in but soundwire is not: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) Rework the driver to have three separate modules, with the main driver just dealing with the common bits and the actual initialization as part of i2c and sdw specific modules. The conversion is fairly mechanical to keep it easy to review, i.e. it moves code around with the minimal required renaming and changes. Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/amd/Kconfig | 2 +- sound/soc/codecs/Kconfig | 11 +- sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682-i2c.c | 306 +++++++++++++ sound/soc/codecs/rt5682-sdw.c | 459 +++++++++++++++++++- sound/soc/codecs/rt5682-sdw.h | 20 - sound/soc/codecs/rt5682.c | 773 ++------------------------------- sound/soc/codecs/rt5682.h | 32 +- sound/soc/intel/boards/Kconfig | 6 +- 9 files changed, 847 insertions(+), 764 deletions(-) create mode 100644 sound/soc/codecs/rt5682-i2c.c delete mode 100644 sound/soc/codecs/rt5682-sdw.h diff --git a/sound/soc/amd/Kconfig b/sound/soc/amd/Kconfig index 77ffdb41bee5..e37cf72f2bab 100644 --- a/sound/soc/amd/Kconfig +++ b/sound/soc/amd/Kconfig @@ -29,7 +29,7 @@ config SND_SOC_AMD_ACP3x config SND_SOC_AMD_RV_RT5682_MACH tristate "AMD RV support for RT5682" - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_MAX98357A select SND_SOC_CROS_EC_CODEC select I2C_CROS_EC_TUNNEL diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 2d4f1b4bc011..243a48aaec2a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -167,7 +167,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT5668 imply SND_SOC_RT5670 imply SND_SOC_RT5677 - imply SND_SOC_RT5682 + imply SND_SOC_RT5682_I2C imply SND_SOC_RT5682_SDW imply SND_SOC_RT700_SDW imply SND_SOC_RT711_SDW @@ -1135,14 +1135,15 @@ config SND_SOC_RT5677_SPI config SND_SOC_RT5682 tristate - depends on I2C || SOUNDWIRE - depends on SOUNDWIRE || !SOUNDWIRE - depends on I2C || !I2C + +config SND_SOC_RT5682_I2C + tristate + depends on I2C + select SND_SOC_RT5682 config SND_SOC_RT5682_SDW tristate "Realtek RT5682 Codec - SDW" depends on SOUNDWIRE - depends on I2C || !I2C select SND_SOC_RT5682 select REGMAP_SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a603532c7af5..34fb7ba5c77f 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -178,6 +178,7 @@ snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o snd-soc-rt5682-objs := rt5682.o snd-soc-rt5682-sdw-objs := rt5682-sdw.o +snd-soc-rt5682-i2c-objs := rt5682-i2c.o snd-soc-rt700-objs := rt700.o rt700-sdw.o snd-soc-rt711-objs := rt711.o rt711-sdw.o snd-soc-rt715-objs := rt715.o rt715-sdw.o @@ -479,6 +480,7 @@ obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o +obj-$(CONFIG_SND_SOC_RT5682_I2C) += snd-soc-rt5682-i2c.o obj-$(CONFIG_SND_SOC_RT5682_SDW) += snd-soc-rt5682-sdw.o obj-$(CONFIG_SND_SOC_RT700) += snd-soc-rt700.o obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c new file mode 100644 index 000000000000..e28d08b1cd65 --- /dev/null +++ b/sound/soc/codecs/rt5682-i2c.c @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt5682.c -- RT5682 ALSA SoC audio component driver +// +// Copyright 2018 Realtek Semiconductor Corp. +// Author: Bard Liao <bardliao(a)realtek.com> +// + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/mutex.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/jack.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt5682.h> + +#include "rl6231.h" +#include "rt5682.h" + +static const struct rt5682_platform_data i2s_default_platform_data = { + .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, + .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, + .jd_src = RT5682_JD1, + .btndet_delay = 16, + .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", + .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", +}; + +static const struct regmap_config rt5682_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = RT5682_REG_NUM, + .use_single_read = true, + .use_single_write = true, +}; + +static void rt5682_jd_check_handler(struct work_struct *work) +{ + struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, + jd_check_work.work); + + if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) + & RT5682_JDH_RS_MASK) { + /* jack out */ + rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); + + snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + } else { + schedule_delayed_work(&rt5682->jd_check_work, 500); + } +} + +static irqreturn_t rt5682_irq(int irq, void *data) +{ + struct rt5682_priv *rt5682 = data; + + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, +}; + +static int rt5682_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt5682_priv *rt5682; + int i, ret; + unsigned int val; + + rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), + GFP_KERNEL); + if (!rt5682) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt5682); + + rt5682->pdata = i2s_default_platform_data; + + if (pdata) + rt5682->pdata = *pdata; + else + rt5682_parse_dt(rt5682, &i2c->dev); + + rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) + rt5682->supplies[i].supply = rt5682_supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + if (gpio_is_valid(rt5682->pdata.ldo1_en)) { + if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, + GPIOF_OUT_INIT_HIGH, "rt5682")) + dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); + } + + /* Sleep for 300 ms miniumum */ + usleep_range(300000, 350000); + + regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); + usleep_range(10000, 15000); + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + dev_err(&i2c->dev, + "Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + mutex_init(&rt5682->calibrate_mutex); + rt5682_calibrate(rt5682); + + rt5682_apply_patch_list(rt5682, &i2c->dev); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + /* DMIC pin*/ + if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { + switch (rt5682->pdata.dmic1_data_pin) { + case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); + break; + + case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); + break; + } + + switch (rt5682->pdata.dmic1_clk_pin) { + case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); + break; + + case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); + break; + } + } + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, + RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); + + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + INIT_DELAYED_WORK(&rt5682->jd_check_work, + rt5682_jd_check_handler); + + if (i2c->irq) { + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_ONESHOT, "rt5682", rt5682); + if (ret) + dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); + } + + return devm_snd_soc_register_component(&i2c->dev, + &rt5682_soc_component_dev, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); +} + +static void rt5682_i2c_shutdown(struct i2c_client *client) +{ + struct rt5682_priv *rt5682 = i2c_get_clientdata(client); + + rt5682_reset(rt5682); +} + +static const struct of_device_id rt5682_of_match[] = { + {.compatible = "realtek,rt5682i"}, + {}, +}; +MODULE_DEVICE_TABLE(of, rt5682_of_match); + +static const struct acpi_device_id rt5682_acpi_match[] = { + {"10EC5682", 0,}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); + +static const struct i2c_device_id rt5682_i2c_id[] = { + {"rt5682", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); + +static struct i2c_driver rt5682_i2c_driver = { + .driver = { + .name = "rt5682", + .of_match_table = rt5682_of_match, + .acpi_match_table = rt5682_acpi_match, + }, + .probe = rt5682_i2c_probe, + .shutdown = rt5682_i2c_shutdown, + .id_table = rt5682_i2c_id, +}; +module_i2c_driver(rt5682_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT5682 driver"); +MODULE_AUTHOR("Bard Liao <bardliao(a)realtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c index 99dd48d2a1d6..4cecc5ce545c 100644 --- a/sound/soc/codecs/rt5682-sdw.c +++ b/sound/soc/codecs/rt5682-sdw.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/mutex.h> #include <linux/soundwire/sdw.h> @@ -28,7 +29,461 @@ #include <sound/tlv.h> #include "rt5682.h" -#include "rt5682-sdw.h" + +#define RT5682_SDW_ADDR_L 0x3000 +#define RT5682_SDW_ADDR_H 0x3001 +#define RT5682_SDW_DATA_L 0x3004 +#define RT5682_SDW_DATA_H 0x3005 +#define RT5682_SDW_CMD 0x3008 + +static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val) +{ + struct device *dev = context; + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + unsigned int data_l, data_h; + + regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); + regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h); + regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l); + + *val = (data_h << 8) | data_l; + + dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val); + + return 0; +} + +static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val) +{ + struct device *dev = context; + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + + regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff)); + + dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); + + return 0; +} + +static const struct regmap_config rt5682_sdw_indirect_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = RT5682_REG_NUM, + .use_single_read = true, + .use_single_write = true, + .reg_read = rt5682_sdw_read, + .reg_write = rt5682_sdw_write, +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, + int direction) +{ + struct sdw_stream_data *stream; + + if (!sdw_stream) + return 0; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; + + /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + dai->playback_dma_data = stream; + else + dai->capture_dma_data = stream; + + return 0; +} + +static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_data *stream; + int retval, port, num_channels; + unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + + stream = snd_soc_dai_get_dma_data(dai, substream); + if (!stream) + return -ENOMEM; + + if (!rt5682->slave) + return -EINVAL; + + /* SoundWire specific configuration */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + direction = SDW_DATA_DIR_RX; + port = 1; + } else { + direction = SDW_DATA_DIR_TX; + port = 2; + } + + stream_config.frame_rate = params_rate(params); + stream_config.ch_count = params_channels(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + + num_channels = params_channels(params); + port_config.ch_mask = (1 << (num_channels)) - 1; + port_config.num = port; + + retval = sdw_stream_add_slave(rt5682->slave, &stream_config, + &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + switch (params_rate(params)) { + case 48000: + val_p = RT5682_SDW_REF_1_48K; + val_c = RT5682_SDW_REF_2_48K; + break; + case 96000: + val_p = RT5682_SDW_REF_1_96K; + val_c = RT5682_SDW_REF_2_96K; + break; + case 192000: + val_p = RT5682_SDW_REF_1_192K; + val_c = RT5682_SDW_REF_2_192K; + break; + case 32000: + val_p = RT5682_SDW_REF_1_32K; + val_c = RT5682_SDW_REF_2_32K; + break; + case 24000: + val_p = RT5682_SDW_REF_1_24K; + val_c = RT5682_SDW_REF_2_24K; + break; + case 16000: + val_p = RT5682_SDW_REF_1_16K; + val_c = RT5682_SDW_REF_2_16K; + break; + case 12000: + val_p = RT5682_SDW_REF_1_12K; + val_c = RT5682_SDW_REF_2_12K; + break; + case 8000: + val_p = RT5682_SDW_REF_1_8K; + val_c = RT5682_SDW_REF_2_8K; + break; + case 44100: + val_p = RT5682_SDW_REF_1_44K; + val_c = RT5682_SDW_REF_2_44K; + break; + case 88200: + val_p = RT5682_SDW_REF_1_88K; + val_c = RT5682_SDW_REF_2_88K; + break; + case 176400: + val_p = RT5682_SDW_REF_1_176K; + val_c = RT5682_SDW_REF_2_176K; + break; + case 22050: + val_p = RT5682_SDW_REF_1_22K; + val_c = RT5682_SDW_REF_2_22K; + break; + case 11025: + val_p = RT5682_SDW_REF_1_11K; + val_c = RT5682_SDW_REF_2_11K; + break; + default: + return -EINVAL; + } + + if (params_rate(params) <= 48000) { + osr_p = RT5682_DAC_OSR_D_8; + osr_c = RT5682_ADC_OSR_D_8; + } else if (params_rate(params) <= 96000) { + osr_p = RT5682_DAC_OSR_D_4; + osr_c = RT5682_ADC_OSR_D_4; + } else { + osr_p = RT5682_DAC_OSR_D_2; + osr_c = RT5682_ADC_OSR_D_2; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, + RT5682_SDW_REF_1_MASK, val_p); + regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, + RT5682_DAC_OSR_MASK, osr_p); + } else { + regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, + RT5682_SDW_REF_2_MASK, val_c); + regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, + RT5682_ADC_OSR_MASK, osr_c); + } + + return retval; +} + +static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!rt5682->slave) + return -EINVAL; + + sdw_stream_remove_slave(rt5682->slave, stream->sdw_stream); + return 0; +} + +static struct snd_soc_dai_ops rt5682_sdw_ops = { + .hw_params = rt5682_sdw_hw_params, + .hw_free = rt5682_sdw_hw_free, + .set_sdw_stream = rt5682_set_sdw_stream, + .shutdown = rt5682_sdw_shutdown, +}; + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, + { + .name = "rt5682-sdw", + .id = RT5682_SDW, + .playback = { + .stream_name = "SDW Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "SDW Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_sdw_ops, + }, +}; + +static int rt5682_sdw_init(struct device *dev, struct regmap *regmap, + struct sdw_slave *slave) +{ + struct rt5682_priv *rt5682; + int ret; + + rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL); + if (!rt5682) + return -ENOMEM; + + dev_set_drvdata(dev, rt5682); + rt5682->slave = slave; + rt5682->sdw_regmap = regmap; + rt5682->is_sdw = true; + + rt5682->regmap = devm_regmap_init(dev, NULL, dev, + &rt5682_sdw_indirect_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + rt5682->hw_init = false; + rt5682->first_hw_init = false; + + mutex_init(&rt5682->calibrate_mutex); + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + + ret = devm_snd_soc_register_component(dev, + &rt5682_soc_component_dev, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); + dev_dbg(&slave->dev, "%s\n", __func__); + + return ret; +} + +static int rt5682_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + int ret = 0; + unsigned int val; + + if (rt5682->hw_init) + return 0; + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + dev_err(dev, "Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!rt5682->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + if (rt5682->first_hw_init) { + regcache_cache_only(rt5682->regmap, false); + regcache_cache_bypass(rt5682->regmap, true); + } + + rt5682_calibrate(rt5682); + + if (rt5682->first_hw_init) { + regcache_cache_bypass(rt5682->regmap, false); + regcache_mark_dirty(rt5682->regmap); + regcache_sync(rt5682->regmap); + + /* volatile registers */ + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, + RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); + + goto reinit; + } + + rt5682_apply_patch_list(rt5682, dev); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); + + /* Soundwire */ + regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f); + regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000); + regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000); + regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK, + RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK, + RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW); + + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, + RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); + regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042); + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3, + RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); + regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1, + RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); + regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, + RT5682_POW_IRQ | RT5682_POW_JDH | + RT5682_POW_ANA, RT5682_POW_IRQ | + RT5682_POW_JDH | RT5682_POW_ANA); + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, + RT5682_PWR_JDH, RT5682_PWR_JDH); + regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, + RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK, + RT5682_JD1_EN | RT5682_JD1_IRQ_PUL); + +reinit: + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + + /* Mark Slave initialization complete */ + rt5682->hw_init = true; + rt5682->first_hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + + return ret; +} static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg) { @@ -46,7 +501,7 @@ static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg) } } -const struct regmap_config rt5682_sdw_regmap = { +static const struct regmap_config rt5682_sdw_regmap = { .name = "sdw", .reg_bits = 32, .val_bits = 8, diff --git a/sound/soc/codecs/rt5682-sdw.h b/sound/soc/codecs/rt5682-sdw.h deleted file mode 100644 index 76e6f607066e..000000000000 --- a/sound/soc/codecs/rt5682-sdw.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only - * - * rt5682-sdw.h -- RT5682 SDW ALSA SoC audio driver - * - * Copyright 2019 Realtek Semiconductor Corp. - * Author: Oder Chiou <oder_chiou(a)realtek.com> - */ - -#ifndef __RT5682_SDW_H__ -#define __RT5682_SDW_H__ - -#define RT5682_SDW_ADDR_L 0x3000 -#define RT5682_SDW_ADDR_H 0x3001 -#define RT5682_SDW_DATA_L 0x3004 -#define RT5682_SDW_DATA_H 0x3005 -#define RT5682_SDW_CMD 0x3008 - -#define RT5682_PROBE_TIMEOUT 2000 - -#endif /* __RT5682_SDW_H__ */ diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 046e6110de73..d3245123101d 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1,10 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-only -/* - * rt5682.c -- RT5682 ALSA SoC audio component driver - * - * Copyright 2018 Realtek Semiconductor Corp. - * Author: Bard Liao <bardliao(a)realtek.com> - */ +// +// rt5682.c -- RT5682 ALSA SoC audio component driver +// +// Copyright 2018 Realtek Semiconductor Corp. +// Author: Bard Liao <bardliao(a)realtek.com> +// #include <linux/module.h> #include <linux/moduleparam.h> @@ -12,7 +12,6 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/pm_runtime.h> -#include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/acpi.h> @@ -31,22 +30,13 @@ #include "rl6231.h" #include "rt5682.h" -#include "rt5682-sdw.h" -static const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = { +const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = { "AVDD", "MICVDD", "VBAT", }; - -static const struct rt5682_platform_data i2s_default_platform_data = { - .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, - .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, - .jd_src = RT5682_JD1, - .btndet_delay = 16, - .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", - .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", -}; +EXPORT_SYMBOL_GPL(rt5682_supply_names); static const struct reg_sequence patch_list[] = { {RT5682_HP_IMP_SENS_CTRL_19, 0x1000}, @@ -55,7 +45,18 @@ static const struct reg_sequence patch_list[] = { {RT5682_PLL2_INTERNAL, 0x8266}, }; -static const struct reg_default rt5682_reg[] = { +void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev) +{ + int ret; + + ret = regmap_multi_reg_write(rt5682->regmap, patch_list, + ARRAY_SIZE(patch_list)); + if (ret) + dev_warn(dev, "Failed to apply regmap patch: %d\n", ret); +} +EXPORT_SYMBOL_GPL(rt5682_apply_patch_list); + +const struct reg_default rt5682_reg[RT5682_REG_NUM] = { {0x0002, 0x8080}, {0x0003, 0x8000}, {0x0005, 0x0000}, @@ -375,8 +376,9 @@ static const struct reg_default rt5682_reg[] = { {0x03f2, 0x0800}, {0x03f3, 0x0800}, }; +EXPORT_SYMBOL_GPL(rt5682_reg); -static bool rt5682_volatile_register(struct device *dev, unsigned int reg) +bool rt5682_volatile_register(struct device *dev, unsigned int reg) { switch (reg) { case RT5682_RESET: @@ -403,8 +405,9 @@ static bool rt5682_volatile_register(struct device *dev, unsigned int reg) return false; } } +EXPORT_SYMBOL_GPL(rt5682_volatile_register); -static bool rt5682_readable_register(struct device *dev, unsigned int reg) +bool rt5682_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case RT5682_RESET: @@ -733,6 +736,7 @@ static bool rt5682_readable_register(struct device *dev, unsigned int reg) return false; } } +EXPORT_SYMBOL_GPL(rt5682_readable_register); static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); @@ -800,12 +804,13 @@ static SOC_ENUM_SINGLE_DECL(rt5682_dacr_enum, static const struct snd_kcontrol_new rt5682_dac_r_mux = SOC_DAPM_ENUM("DAC R Mux", rt5682_dacr_enum); -static void rt5682_reset(struct rt5682_priv *rt5682) +void rt5682_reset(struct rt5682_priv *rt5682) { regmap_write(rt5682->regmap, RT5682_RESET, 0); if (!rt5682->is_sdw) regmap_write(rt5682->regmap, RT5682_I2C_MODE, 1); } +EXPORT_SYMBOL_GPL(rt5682_reset); /** * rt5682_sel_asrc_clk_src - select ASRC clock source for a set of filters @@ -910,8 +915,7 @@ static void rt5682_enable_push_button_irq(struct snd_soc_component *component, * * Returns detect status. */ -static int rt5682_headset_detect(struct snd_soc_component *component, - int jack_insert) +int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert) { struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); struct snd_soc_dapm_context *dapm = &component->dapm; @@ -972,35 +976,7 @@ static int rt5682_headset_detect(struct snd_soc_component *component, dev_dbg(component->dev, "jack_type = %d\n", rt5682->jack_type); return rt5682->jack_type; } - -static irqreturn_t rt5682_irq(int irq, void *data) -{ - struct rt5682_priv *rt5682 = data; - - mod_delayed_work(system_power_efficient_wq, - &rt5682->jack_detect_work, msecs_to_jiffies(250)); - - return IRQ_HANDLED; -} - -static void rt5682_jd_check_handler(struct work_struct *work) -{ - struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, - jd_check_work.work); - - if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) - & RT5682_JDH_RS_MASK) { - /* jack out */ - rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); - - snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, - SND_JACK_HEADSET | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3); - } else { - schedule_delayed_work(&rt5682->jd_check_work, 500); - } -} +EXPORT_SYMBOL_GPL(rt5682_headset_detect); static int rt5682_set_jack_detect(struct snd_soc_component *component, struct snd_soc_jack *hs_jack, void *data) @@ -1077,7 +1053,7 @@ static int rt5682_set_jack_detect(struct snd_soc_component *component, return 0; } -static void rt5682_jack_detect_handler(struct work_struct *work) +void rt5682_jack_detect_handler(struct work_struct *work) { struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, jack_detect_work.work); @@ -1160,6 +1136,7 @@ static void rt5682_jack_detect_handler(struct work_struct *work) mutex_unlock(&rt5682->calibrate_mutex); } +EXPORT_SYMBOL_GPL(rt5682_jack_detect_handler); static const struct snd_kcontrol_new rt5682_snd_controls[] = { /* DAC Digital Volume */ @@ -2899,7 +2876,8 @@ static int rt5682_resume(struct snd_soc_component *component) regcache_cache_only(rt5682->regmap, false); regcache_sync(rt5682->regmap); - rt5682_irq(0, rt5682); + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); return 0; } @@ -2908,270 +2886,22 @@ static int rt5682_resume(struct snd_soc_component *component) #define rt5682_resume NULL #endif -#define RT5682_STEREO_RATES SNDRV_PCM_RATE_8000_192000 -#define RT5682_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) - -static const struct snd_soc_dai_ops rt5682_aif1_dai_ops = { +const struct snd_soc_dai_ops rt5682_aif1_dai_ops = { .hw_params = rt5682_hw_params, .set_fmt = rt5682_set_dai_fmt, .set_tdm_slot = rt5682_set_tdm_slot, .set_bclk_ratio = rt5682_set_bclk1_ratio, }; +EXPORT_SYMBOL_GPL(rt5682_aif1_dai_ops); -static const struct snd_soc_dai_ops rt5682_aif2_dai_ops = { +const struct snd_soc_dai_ops rt5682_aif2_dai_ops = { .hw_params = rt5682_hw_params, .set_fmt = rt5682_set_dai_fmt, .set_bclk_ratio = rt5682_set_bclk2_ratio, }; +EXPORT_SYMBOL_GPL(rt5682_aif2_dai_ops); -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) -struct sdw_stream_data { - struct sdw_stream_runtime *sdw_stream; -}; - -static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, - int direction) -{ - struct sdw_stream_data *stream; - - if (!sdw_stream) - return 0; - - stream = kzalloc(sizeof(*stream), GFP_KERNEL); - if (!stream) - return -ENOMEM; - - stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; - - /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ - if (direction == SNDRV_PCM_STREAM_PLAYBACK) - dai->playback_dma_data = stream; - else - dai->capture_dma_data = stream; - - return 0; -} - -static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sdw_stream_data *stream; - - stream = snd_soc_dai_get_dma_data(dai, substream); - snd_soc_dai_set_dma_data(dai, substream, NULL); - kfree(stream); -} - -static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_component *component = dai->component; - struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); - struct sdw_stream_config stream_config; - struct sdw_port_config port_config; - enum sdw_data_direction direction; - struct sdw_stream_data *stream; - int retval, port, num_channels; - unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0; - - dev_dbg(dai->dev, "%s %s", __func__, dai->name); - - stream = snd_soc_dai_get_dma_data(dai, substream); - if (!stream) - return -ENOMEM; - - if (!rt5682->slave) - return -EINVAL; - - /* SoundWire specific configuration */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - direction = SDW_DATA_DIR_RX; - port = 1; - } else { - direction = SDW_DATA_DIR_TX; - port = 2; - } - - stream_config.frame_rate = params_rate(params); - stream_config.ch_count = params_channels(params); - stream_config.bps = snd_pcm_format_width(params_format(params)); - stream_config.direction = direction; - - num_channels = params_channels(params); - port_config.ch_mask = (1 << (num_channels)) - 1; - port_config.num = port; - - retval = sdw_stream_add_slave(rt5682->slave, &stream_config, - &port_config, 1, stream->sdw_stream); - if (retval) { - dev_err(dai->dev, "Unable to configure port\n"); - return retval; - } - - switch (params_rate(params)) { - case 48000: - val_p = RT5682_SDW_REF_1_48K; - val_c = RT5682_SDW_REF_2_48K; - break; - case 96000: - val_p = RT5682_SDW_REF_1_96K; - val_c = RT5682_SDW_REF_2_96K; - break; - case 192000: - val_p = RT5682_SDW_REF_1_192K; - val_c = RT5682_SDW_REF_2_192K; - break; - case 32000: - val_p = RT5682_SDW_REF_1_32K; - val_c = RT5682_SDW_REF_2_32K; - break; - case 24000: - val_p = RT5682_SDW_REF_1_24K; - val_c = RT5682_SDW_REF_2_24K; - break; - case 16000: - val_p = RT5682_SDW_REF_1_16K; - val_c = RT5682_SDW_REF_2_16K; - break; - case 12000: - val_p = RT5682_SDW_REF_1_12K; - val_c = RT5682_SDW_REF_2_12K; - break; - case 8000: - val_p = RT5682_SDW_REF_1_8K; - val_c = RT5682_SDW_REF_2_8K; - break; - case 44100: - val_p = RT5682_SDW_REF_1_44K; - val_c = RT5682_SDW_REF_2_44K; - break; - case 88200: - val_p = RT5682_SDW_REF_1_88K; - val_c = RT5682_SDW_REF_2_88K; - break; - case 176400: - val_p = RT5682_SDW_REF_1_176K; - val_c = RT5682_SDW_REF_2_176K; - break; - case 22050: - val_p = RT5682_SDW_REF_1_22K; - val_c = RT5682_SDW_REF_2_22K; - break; - case 11025: - val_p = RT5682_SDW_REF_1_11K; - val_c = RT5682_SDW_REF_2_11K; - break; - default: - return -EINVAL; - } - - if (params_rate(params) <= 48000) { - osr_p = RT5682_DAC_OSR_D_8; - osr_c = RT5682_ADC_OSR_D_8; - } else if (params_rate(params) <= 96000) { - osr_p = RT5682_DAC_OSR_D_4; - osr_c = RT5682_ADC_OSR_D_4; - } else { - osr_p = RT5682_DAC_OSR_D_2; - osr_c = RT5682_ADC_OSR_D_2; - } - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, - RT5682_SDW_REF_1_MASK, val_p); - regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, - RT5682_DAC_OSR_MASK, osr_p); - } else { - regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, - RT5682_SDW_REF_2_MASK, val_c); - regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, - RT5682_ADC_OSR_MASK, osr_c); - } - - return retval; -} - -static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_component *component = dai->component; - struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); - struct sdw_stream_data *stream = - snd_soc_dai_get_dma_data(dai, substream); - - if (!rt5682->slave) - return -EINVAL; - - sdw_stream_remove_slave(rt5682->slave, stream->sdw_stream); - return 0; -} - -static struct snd_soc_dai_ops rt5682_sdw_ops = { - .hw_params = rt5682_sdw_hw_params, - .hw_free = rt5682_sdw_hw_free, - .set_sdw_stream = rt5682_set_sdw_stream, - .shutdown = rt5682_sdw_shutdown, -}; -#endif - -static struct snd_soc_dai_driver rt5682_dai[] = { - { - .name = "rt5682-aif1", - .id = RT5682_AIF1, - .playback = { - .stream_name = "AIF1 Playback", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .capture = { - .stream_name = "AIF1 Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_aif1_dai_ops, - }, - { - .name = "rt5682-aif2", - .id = RT5682_AIF2, - .capture = { - .stream_name = "AIF2 Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_aif2_dai_ops, - }, -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) - { - .name = "rt5682-sdw", - .id = RT5682_SDW, - .playback = { - .stream_name = "SDW Playback", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .capture = { - .stream_name = "SDW Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_sdw_ops, - }, -#endif -}; - -static const struct snd_soc_component_driver soc_component_dev_rt5682 = { +const struct snd_soc_component_driver rt5682_soc_component_dev = { .probe = rt5682_probe, .remove = rt5682_remove, .suspend = rt5682_suspend, @@ -3190,27 +2920,9 @@ static const struct snd_soc_component_driver soc_component_dev_rt5682 = { .endianness = 1, .non_legacy_dai_naming = 1, }; +EXPORT_SYMBOL_GPL(rt5682_soc_component_dev); -static const struct regmap_config rt5682_regmap = { - .reg_bits = 16, - .val_bits = 16, - .max_register = RT5682_I2C_MODE, - .volatile_reg = rt5682_volatile_register, - .readable_reg = rt5682_readable_register, - .cache_type = REGCACHE_RBTREE, - .reg_defaults = rt5682_reg, - .num_reg_defaults = ARRAY_SIZE(rt5682_reg), - .use_single_read = true, - .use_single_write = true, -}; - -static const struct i2c_device_id rt5682_i2c_id[] = { - {"rt5682", 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); - -static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) +int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) { device_property_read_u32(dev, "realtek,dmic1-data-pin", @@ -3238,8 +2950,9 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(rt5682_parse_dt); -static void rt5682_calibrate(struct rt5682_priv *rt5682) +void rt5682_calibrate(struct rt5682_priv *rt5682) { int value, count; @@ -3289,407 +3002,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682) mutex_unlock(&rt5682->calibrate_mutex); } - -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) -static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val) -{ - struct device *dev = context; - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - unsigned int data_l, data_h; - - regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); - regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h); - regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l); - - *val = (data_h << 8) | data_l; - - dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val); - - return 0; -} - -static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val) -{ - struct device *dev = context; - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - - regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff)); - - dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); - - return 0; -} - -static const struct regmap_config rt5682_sdw_regmap = { - .reg_bits = 16, - .val_bits = 16, - .max_register = RT5682_I2C_MODE, - .volatile_reg = rt5682_volatile_register, - .readable_reg = rt5682_readable_register, - .cache_type = REGCACHE_RBTREE, - .reg_defaults = rt5682_reg, - .num_reg_defaults = ARRAY_SIZE(rt5682_reg), - .use_single_read = true, - .use_single_write = true, - .reg_read = rt5682_sdw_read, - .reg_write = rt5682_sdw_write, -}; - -int rt5682_sdw_init(struct device *dev, struct regmap *regmap, - struct sdw_slave *slave) -{ - struct rt5682_priv *rt5682; - int ret; - - rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL); - if (!rt5682) - return -ENOMEM; - - dev_set_drvdata(dev, rt5682); - rt5682->slave = slave; - rt5682->sdw_regmap = regmap; - rt5682->is_sdw = true; - - rt5682->regmap = devm_regmap_init(dev, NULL, dev, &rt5682_sdw_regmap); - if (IS_ERR(rt5682->regmap)) { - ret = PTR_ERR(rt5682->regmap); - dev_err(dev, "Failed to allocate register map: %d\n", - ret); - return ret; - } - - /* - * Mark hw_init to false - * HW init will be performed when device reports present - */ - rt5682->hw_init = false; - rt5682->first_hw_init = false; - - mutex_init(&rt5682->calibrate_mutex); - INIT_DELAYED_WORK(&rt5682->jack_detect_work, - rt5682_jack_detect_handler); - - ret = devm_snd_soc_register_component(dev, &soc_component_dev_rt5682, - rt5682_dai, ARRAY_SIZE(rt5682_dai)); - - dev_dbg(&slave->dev, "%s\n", __func__); - - return ret; -} -EXPORT_SYMBOL_GPL(rt5682_sdw_init); - -int rt5682_io_init(struct device *dev, struct sdw_slave *slave) -{ - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - int ret = 0; - unsigned int val; - - if (rt5682->hw_init) - return 0; - - regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); - if (val != DEVICE_ID) { - dev_err(dev, "Device with ID register %x is not rt5682\n", val); - return -ENODEV; - } - - /* - * PM runtime is only enabled when a Slave reports as Attached - */ - if (!rt5682->first_hw_init) { - /* set autosuspend parameters */ - pm_runtime_set_autosuspend_delay(&slave->dev, 3000); - pm_runtime_use_autosuspend(&slave->dev); - - /* update count of parent 'active' children */ - pm_runtime_set_active(&slave->dev); - - /* make sure the device does not suspend immediately */ - pm_runtime_mark_last_busy(&slave->dev); - - pm_runtime_enable(&slave->dev); - } - - pm_runtime_get_noresume(&slave->dev); - - if (rt5682->first_hw_init) { - regcache_cache_only(rt5682->regmap, false); - regcache_cache_bypass(rt5682->regmap, true); - } - - rt5682_calibrate(rt5682); - - if (rt5682->first_hw_init) { - regcache_cache_bypass(rt5682->regmap, false); - regcache_mark_dirty(rt5682->regmap); - regcache_sync(rt5682->regmap); - - /* volatile registers */ - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, - RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); - - goto reinit; - } - - ret = regmap_multi_reg_write(rt5682->regmap, patch_list, - ARRAY_SIZE(patch_list)); - if (ret) - dev_warn(dev, "Failed to apply regmap patch: %d\n", ret); - - regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); - - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, - RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, - RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); - regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); - regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); - regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, - RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); - regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, - RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); - regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, - RT5682_PM_HP_MASK, RT5682_PM_HP_HV); - - /* Soundwire */ - regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f); - regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000); - regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000); - regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK, - RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK, - RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW); - - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, - RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); - regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042); - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3, - RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); - regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1, - RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); - regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, - RT5682_POW_IRQ | RT5682_POW_JDH | - RT5682_POW_ANA, RT5682_POW_IRQ | - RT5682_POW_JDH | RT5682_POW_ANA); - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, - RT5682_PWR_JDH, RT5682_PWR_JDH); - regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, - RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK, - RT5682_JD1_EN | RT5682_JD1_IRQ_PUL); - -reinit: - mod_delayed_work(system_power_efficient_wq, - &rt5682->jack_detect_work, msecs_to_jiffies(250)); - - /* Mark Slave initialization complete */ - rt5682->hw_init = true; - rt5682->first_hw_init = true; - - pm_runtime_mark_last_busy(&slave->dev); - pm_runtime_put_autosuspend(&slave->dev); - - dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); - - return ret; -} -EXPORT_SYMBOL_GPL(rt5682_io_init); -#endif - -static int rt5682_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); - struct rt5682_priv *rt5682; - int i, ret; - unsigned int val; - - rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), - GFP_KERNEL); - if (!rt5682) - return -ENOMEM; - - i2c_set_clientdata(i2c, rt5682); - - rt5682->pdata = i2s_default_platform_data; - - if (pdata) - rt5682->pdata = *pdata; - else - rt5682_parse_dt(rt5682, &i2c->dev); - - rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); - if (IS_ERR(rt5682->regmap)) { - ret = PTR_ERR(rt5682->regmap); - dev_err(&i2c->dev, "Failed to allocate register map: %d\n", - ret); - return ret; - } - - for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) - rt5682->supplies[i].supply = rt5682_supply_names[i]; - - ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), - rt5682->supplies); - if (ret) { - dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); - return ret; - } - - ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), - rt5682->supplies); - if (ret) { - dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); - return ret; - } - - if (gpio_is_valid(rt5682->pdata.ldo1_en)) { - if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, - GPIOF_OUT_INIT_HIGH, "rt5682")) - dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); - } - - /* Sleep for 300 ms miniumum */ - usleep_range(300000, 350000); - - regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); - usleep_range(10000, 15000); - - regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); - if (val != DEVICE_ID) { - dev_err(&i2c->dev, - "Device with ID register %x is not rt5682\n", val); - return -ENODEV; - } - - mutex_init(&rt5682->calibrate_mutex); - rt5682_calibrate(rt5682); - - ret = regmap_multi_reg_write(rt5682->regmap, patch_list, - ARRAY_SIZE(patch_list)); - if (ret) - dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret); - - regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); - - /* DMIC pin*/ - if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { - switch (rt5682->pdata.dmic1_data_pin) { - case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); - break; - - case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); - break; - - default: - dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); - break; - } - - switch (rt5682->pdata.dmic1_clk_pin) { - case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); - break; - - case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); - break; - - default: - dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); - break; - } - } - - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, - RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, - RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); - regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, - RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); - regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); - regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, - RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); - regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, - RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); - regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, - RT5682_PM_HP_MASK, RT5682_PM_HP_HV); - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); - - INIT_DELAYED_WORK(&rt5682->jack_detect_work, - rt5682_jack_detect_handler); - INIT_DELAYED_WORK(&rt5682->jd_check_work, - rt5682_jd_check_handler); - - if (i2c->irq) { - ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, - rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING - | IRQF_ONESHOT, "rt5682", rt5682); - if (ret) - dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); - } - - return devm_snd_soc_register_component(&i2c->dev, - &soc_component_dev_rt5682, - rt5682_dai, ARRAY_SIZE(rt5682_dai)); -} - -static void rt5682_i2c_shutdown(struct i2c_client *client) -{ - struct rt5682_priv *rt5682 = i2c_get_clientdata(client); - - rt5682_reset(rt5682); -} - -#ifdef CONFIG_OF -static const struct of_device_id rt5682_of_match[] = { - {.compatible = "realtek,rt5682i"}, - {}, -}; -MODULE_DEVICE_TABLE(of, rt5682_of_match); -#endif - -#ifdef CONFIG_ACPI -static const struct acpi_device_id rt5682_acpi_match[] = { - {"10EC5682", 0,}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); -#endif - -static struct i2c_driver __maybe_unused rt5682_i2c_driver = { - .driver = { - .name = "rt5682", - .of_match_table = of_match_ptr(rt5682_of_match), - .acpi_match_table = ACPI_PTR(rt5682_acpi_match), - }, - .probe = rt5682_i2c_probe, - .shutdown = rt5682_i2c_shutdown, - .id_table = rt5682_i2c_id, -}; - -#ifdef CONFIG_I2C -module_i2c_driver(rt5682_i2c_driver); -#endif +EXPORT_SYMBOL_GPL(rt5682_calibrate); MODULE_DESCRIPTION("ASoC RT5682 driver"); MODULE_AUTHOR("Bard Liao <bardliao(a)realtek.com>"); diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h index 0baeece84ec4..f172c9ebd227 100644 --- a/sound/soc/codecs/rt5682.h +++ b/sound/soc/codecs/rt5682.h @@ -1337,6 +1337,13 @@ #define RT5682_SAR_SOUR_BTN (0x3f) #define RT5682_SAR_SOUR_TYPE (0x0) +/* soundwire timeout */ +#define RT5682_PROBE_TIMEOUT 2000 + + +#define RT5682_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT5682_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) /* System Clock Source */ enum { @@ -1418,10 +1425,29 @@ struct rt5682_priv { int jack_type; }; +extern const char *rt5682_supply_names[RT5682_NUM_SUPPLIES]; + int rt5682_sel_asrc_clk_src(struct snd_soc_component *component, unsigned int filter_mask, unsigned int clk_src); -int rt5682_sdw_init(struct device *dev, struct regmap *regmap, - struct sdw_slave *slave); -int rt5682_io_init(struct device *dev, struct sdw_slave *slave); + +void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev); + +int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert); +void rt5682_jack_detect_handler(struct work_struct *work); + +bool rt5682_volatile_register(struct device *dev, unsigned int reg); +bool rt5682_readable_register(struct device *dev, unsigned int reg); + +int rt5682_register_component(struct device *dev); +void rt5682_calibrate(struct rt5682_priv *rt5682); +void rt5682_reset(struct rt5682_priv *rt5682); +int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev); + +#define RT5682_REG_NUM 318 +extern const struct reg_default rt5682_reg[RT5682_REG_NUM]; + +extern const struct snd_soc_dai_ops rt5682_aif1_dai_ops; +extern const struct snd_soc_dai_ops rt5682_aif2_dai_ops; +extern const struct snd_soc_component_driver rt5682_soc_component_dev; #endif /* __RT5682_H__ */ diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 91ce347b3a45..46073c04364a 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -430,7 +430,7 @@ config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH depends on I2C && ACPI && GPIOLIB depends on MFD_INTEL_LPSS || COMPILE_TEST depends on SND_HDA_CODEC_HDMI - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_MAX98357A select SND_SOC_DMIC select SND_SOC_HDAC_HDMI @@ -468,7 +468,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH depends on SND_HDA_CODEC_HDMI select SND_SOC_MAX98373 select SND_SOC_RT1015 - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_DMIC select SND_SOC_HDAC_HDMI help @@ -511,7 +511,7 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH depends on MFD_INTEL_LPSS || COMPILE_TEST depends on SND_HDA_CODEC_HDMI select SND_SOC_RT1011 - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_DMIC select SND_SOC_HDAC_HDMI help -- 2.26.2

2 1

[v2] ASoC: AMD: Use mixer control to switch between DMICs
by Akshu Agrawal 28 May '20

28 May '20

Having mixer control to switch between DMICs prevents user to initiate capture simultaneously on both the DMIcs. Earlier 2 separate devices, one for each DMIC, gave an option of using them simultaneously, which is not supported. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- v2: Modified "Front Mic" to "DMIC Switch" sound/soc/amd/acp3x-rt5682-max9836.c | 43 +++++++++++----------------- 1 file changed, 16 insertions(+), 27 deletions(-) diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e499c00e0c66..0d3422b5f1a9 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -188,25 +188,27 @@ static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream) machine->cap_i2s_instance = I2S_BT_INSTANCE; snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 0); return rt5682_clk_enable(substream); } -static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_card *card = rtd->card; - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card); +static int dmic_switch; - machine->cap_i2s_instance = I2S_BT_INSTANCE; - snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 1); +static int dmic_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = dmic_switch; + return 0; +} - return rt5682_clk_enable(substream); +static int dmic_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + if (dmic_sel) { + dmic_switch = ucontrol->value.integer.value[0]; + gpiod_set_value(dmic_sel, !dmic_switch); + } + return 0; } static void rt5682_shutdown(struct snd_pcm_substream *substream) @@ -229,11 +231,6 @@ static const struct snd_soc_ops acp3x_ec_cap0_ops = { .shutdown = rt5682_shutdown, }; -static const struct snd_soc_ops acp3x_ec_cap1_ops = { - .startup = acp3x_ec_dmic1_startup, - .shutdown = rt5682_shutdown, -}; - SND_SOC_DAILINK_DEF(acp3x_i2s, DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0"))); SND_SOC_DAILINK_DEF(acp3x_bt, @@ -279,15 +276,6 @@ static struct snd_soc_dai_link acp3x_dai_5682_98357[] = { .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), }, - { - .name = "acp3x-ec-dmic1-capture", - .stream_name = "Capture DMIC1", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, - .dpcm_capture = 1, - .ops = &acp3x_ec_cap1_ops, - SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), - }, }; static const struct snd_soc_dapm_widget acp3x_widgets[] = { @@ -307,6 +295,7 @@ static const struct snd_kcontrol_new acp3x_mc_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Spk"), SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_SINGLE_BOOL_EXT("DMIC Switch", 0, dmic_get, dmic_set), }; static struct snd_soc_card acp3x_card = { -- 2.20.1

2 1

How to specify that a non-DPCM DAI link is bidirectional?
by Daniel Baluta 28 May '20

28 May '20

Hi all, For uni-directional dai links there are these fields of snd_soc_dai_link: * playback_only * capture_only But what about bi-directional DAI links? Is it safe to assume that if playback_only = 0 and capture_only = 0 then the link is bi-directional? We need this in sound/soc/soc-core.c: soc_check_tplg_fes where a non-DPCM link is converted to a BE DPCM and we need to inherit the directions supported. For reference see: https://github.com/thesofproject/linux/pull/2143 thanks, Daniel.

1 0

[RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 28 May '20

28 May '20

Add documentation for DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +}; -- 2.17.1

3 2

[PATCH] ASoC: AMD: Use mixer control to switch between DMICs
by Akshu Agrawal 28 May '20

28 May '20

Having mixer control to switch between DMICs prevents user to initiate capture simultaneously on both the DMIcs. Earlier 2 separate devices, one for each DMIC, gave an option of using them simultaneously, which is not supported. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- sound/soc/amd/acp3x-rt5682-max9836.c | 43 +++++++++++----------------- 1 file changed, 16 insertions(+), 27 deletions(-) diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e499c00e0c66..19f55a814547 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -188,25 +188,27 @@ static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream) machine->cap_i2s_instance = I2S_BT_INSTANCE; snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 0); return rt5682_clk_enable(substream); } -static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_card *card = rtd->card; - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card); +static int front_mic_enabled; - machine->cap_i2s_instance = I2S_BT_INSTANCE; - snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 1); +static int front_mic_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = front_mic_enabled; + return 0; +} - return rt5682_clk_enable(substream); +static int front_mic_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + if (dmic_sel) { + front_mic_enabled = ucontrol->value.integer.value[0]; + gpiod_set_value(dmic_sel, !front_mic_enabled); + } + return 0; } static void rt5682_shutdown(struct snd_pcm_substream *substream) @@ -229,11 +231,6 @@ static const struct snd_soc_ops acp3x_ec_cap0_ops = { .shutdown = rt5682_shutdown, }; -static const struct snd_soc_ops acp3x_ec_cap1_ops = { - .startup = acp3x_ec_dmic1_startup, - .shutdown = rt5682_shutdown, -}; - SND_SOC_DAILINK_DEF(acp3x_i2s, DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0"))); SND_SOC_DAILINK_DEF(acp3x_bt, @@ -279,15 +276,6 @@ static struct snd_soc_dai_link acp3x_dai_5682_98357[] = { .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), }, - { - .name = "acp3x-ec-dmic1-capture", - .stream_name = "Capture DMIC1", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, - .dpcm_capture = 1, - .ops = &acp3x_ec_cap1_ops, - SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), - }, }; static const struct snd_soc_dapm_widget acp3x_widgets[] = { @@ -307,6 +295,7 @@ static const struct snd_kcontrol_new acp3x_mc_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Spk"), SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_SINGLE_BOOL_EXT("Front Mic", 0, front_mic_get, front_mic_set), }; static struct snd_soc_card acp3x_card = { -- 2.20.1

3 2

[PATCH 00/19] ASoC: add soc-card
by Kuninori Morimoto 28 May '20

28 May '20

Hi Mark Current ALSA SoC is handling snd_soc_card related operation, but it is implmemented directly without using function/macro, and at random place. This patch-set creates new snd_soc_card_xxx() functions which handles snd_soc_card related operation, and implmement these at new soc-card.c. Kuninori Morimoto (19): ASoC: soc.h: convert bool to bit field for snd_soc_card ASoC: add soc-card.c ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card ASoC: soc-card: move snd_soc_card_jack_new() to soc-card ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card ASoC: soc-card: move snd_soc_card_subclass to soc-card ASoC: soc-card: add snd_soc_card_suspend_pre() ASoC: soc-card: add snd_soc_card_suspend_post() ASoC: soc-card: add snd_soc_card_resume_pre() ASoC: soc-card: add snd_soc_card_resume_post() ASoC: soc-card: add probed bit field to snd_soc_card ASoC: soc-card: add snd_soc_card_probe() ASoC: soc-card: add snd_soc_card_late_probe() ASoC: soc-card: add snd_soc_card_remove() ASoC: soc-card: add snd_soc_card_set_bias_level() ASoC: soc-card: add snd_soc_card_set_bias_level_post() ASoC: soc-card: add snd_soc_card_add_dai_link() ASoC: soc-card: add snd_soc_card_remove_dai_link() include/sound/soc-card.h | 69 +++++++++++++ include/sound/soc.h | 53 ++-------- sound/soc/Makefile | 2 +- sound/soc/soc-card.c | 218 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-core.c | 71 ++++--------- sound/soc/soc-dapm.c | 8 +- sound/soc/soc-jack.c | 38 ------- 7 files changed, 320 insertions(+), 139 deletions(-) create mode 100644 include/sound/soc-card.h create mode 100644 sound/soc/soc-card.c -- 2.17.1

3 27

alsa-lib: mmap API disables blocking I/O or sw_params
by Mark Hills 28 May '20

28 May '20

I'm swapping out a vanilla loop based on RW_INTERLEAVED for MMAP_INTERLEAVED, to reduce memory copies: The equivalent code becomes: snd_pcm_avail_update() snd_pcm_mmap_begin() snd_pcm_mmap_commit() but what I find no longer works: * Blocking I/O: it's necessary to make explicit calls to snd_pcm_wait() with syscall overhead of poll() * Automatic start (and perhaps others): so I have to count the frames committed and call snd_pcm_start() explicitly. I don't think these are conceptually incompatible with mmap, so is this the intended behaviour and an important omission from the docs? Or is the mmap API not widely used and I'm stumbling on bugs? -- Mark

1 0

[PATCH] ASoC: rt5682: split i2c driver into separate module
by Arnd Bergmann 28 May '20

28 May '20

With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the driver, we can easily get a build failure when I2C is built-in but soundwire is not: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) Rework the driver to have three separate modules, with the main driver just dealing with the common bits and the actual initialization as part of i2c and sdw specific modules. The conversion is fairly mechanical to keep it easy to review, i.e. it moves code around with the minimal required renaming and changes. Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/amd/Kconfig | 2 +- sound/soc/codecs/Kconfig | 11 +- sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682-i2c.c | 341 ++++++++++++++ sound/soc/codecs/rt5682-sdw.c | 459 ++++++++++++++++++- sound/soc/codecs/rt5682-sdw.h | 20 - sound/soc/codecs/rt5682.c | 790 ++------------------------------- sound/soc/codecs/rt5682.h | 29 +- sound/soc/intel/boards/Kconfig | 6 +- 9 files changed, 869 insertions(+), 791 deletions(-) create mode 100644 sound/soc/codecs/rt5682-i2c.c delete mode 100644 sound/soc/codecs/rt5682-sdw.h diff --git a/sound/soc/amd/Kconfig b/sound/soc/amd/Kconfig index 77ffdb41bee5..e37cf72f2bab 100644 --- a/sound/soc/amd/Kconfig +++ b/sound/soc/amd/Kconfig @@ -29,7 +29,7 @@ config SND_SOC_AMD_ACP3x config SND_SOC_AMD_RV_RT5682_MACH tristate "AMD RV support for RT5682" - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_MAX98357A select SND_SOC_CROS_EC_CODEC select I2C_CROS_EC_TUNNEL diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 2d4f1b4bc011..243a48aaec2a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -167,7 +167,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT5668 imply SND_SOC_RT5670 imply SND_SOC_RT5677 - imply SND_SOC_RT5682 + imply SND_SOC_RT5682_I2C imply SND_SOC_RT5682_SDW imply SND_SOC_RT700_SDW imply SND_SOC_RT711_SDW @@ -1135,14 +1135,15 @@ config SND_SOC_RT5677_SPI config SND_SOC_RT5682 tristate - depends on I2C || SOUNDWIRE - depends on SOUNDWIRE || !SOUNDWIRE - depends on I2C || !I2C + +config SND_SOC_RT5682_I2C + tristate + depends on I2C + select SND_SOC_RT5682 config SND_SOC_RT5682_SDW tristate "Realtek RT5682 Codec - SDW" depends on SOUNDWIRE - depends on I2C || !I2C select SND_SOC_RT5682 select REGMAP_SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a603532c7af5..34fb7ba5c77f 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -178,6 +178,7 @@ snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o snd-soc-rt5682-objs := rt5682.o snd-soc-rt5682-sdw-objs := rt5682-sdw.o +snd-soc-rt5682-i2c-objs := rt5682-i2c.o snd-soc-rt700-objs := rt700.o rt700-sdw.o snd-soc-rt711-objs := rt711.o rt711-sdw.o snd-soc-rt715-objs := rt715.o rt715-sdw.o @@ -479,6 +480,7 @@ obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o +obj-$(CONFIG_SND_SOC_RT5682_I2C) += snd-soc-rt5682-i2c.o obj-$(CONFIG_SND_SOC_RT5682_SDW) += snd-soc-rt5682-sdw.o obj-$(CONFIG_SND_SOC_RT700) += snd-soc-rt700.o obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c new file mode 100644 index 000000000000..c891aa80757f --- /dev/null +++ b/sound/soc/codecs/rt5682-i2c.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * rt5682.c -- RT5682 ALSA SoC audio component driver + * + * Copyright 2018 Realtek Semiconductor Corp. + * Author: Bard Liao <bardliao(a)realtek.com> + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/mutex.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/jack.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt5682.h> + +#include "rl6231.h" +#include "rt5682.h" + +static const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = { + "AVDD", + "MICVDD", + "VBAT", +}; + +static const struct rt5682_platform_data i2s_default_platform_data = { + .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, + .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, + .jd_src = RT5682_JD1, + .btndet_delay = 16, + .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", + .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", +}; + +static const struct regmap_config rt5682_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = RT5682_REG_NUM, + .use_single_read = true, + .use_single_write = true, +}; + +static void rt5682_jd_check_handler(struct work_struct *work) +{ + struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, + jd_check_work.work); + + if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) + & RT5682_JDH_RS_MASK) { + /* jack out */ + rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); + + snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + } else { + schedule_delayed_work(&rt5682->jd_check_work, 500); + } +} + +static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) +{ + + device_property_read_u32(dev, "realtek,dmic1-data-pin", + &rt5682->pdata.dmic1_data_pin); + device_property_read_u32(dev, "realtek,dmic1-clk-pin", + &rt5682->pdata.dmic1_clk_pin); + device_property_read_u32(dev, "realtek,jd-src", + &rt5682->pdata.jd_src); + device_property_read_u32(dev, "realtek,btndet-delay", + &rt5682->pdata.btndet_delay); + device_property_read_u32(dev, "realtek,dmic-clk-rate-hz", + &rt5682->pdata.dmic_clk_rate); + device_property_read_u32(dev, "realtek,dmic-delay-ms", + &rt5682->pdata.dmic_delay); + + rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node, + "realtek,ldo1-en-gpios", 0); + + if (device_property_read_string_array(dev, "clock-output-names", + rt5682->pdata.dai_clk_names, + RT5682_DAI_NUM_CLKS) < 0) + dev_warn(dev, "Using default DAI clk names: %s, %s\n", + rt5682->pdata.dai_clk_names[RT5682_DAI_WCLK_IDX], + rt5682->pdata.dai_clk_names[RT5682_DAI_BCLK_IDX]); + + return 0; +} + +static irqreturn_t rt5682_irq(int irq, void *data) +{ + struct rt5682_priv *rt5682 = data; + + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, +}; + +static int rt5682_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt5682_priv *rt5682; + int i, ret; + unsigned int val; + + rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), + GFP_KERNEL); + if (!rt5682) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt5682); + + rt5682->pdata = i2s_default_platform_data; + + if (pdata) + rt5682->pdata = *pdata; + else + rt5682_parse_dt(rt5682, &i2c->dev); + + rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) + rt5682->supplies[i].supply = rt5682_supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + if (gpio_is_valid(rt5682->pdata.ldo1_en)) { + if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, + GPIOF_OUT_INIT_HIGH, "rt5682")) + dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); + } + + /* Sleep for 300 ms miniumum */ + usleep_range(300000, 350000); + + regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); + usleep_range(10000, 15000); + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + dev_err(&i2c->dev, + "Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + mutex_init(&rt5682->calibrate_mutex); + rt5682_calibrate(rt5682); + + rt5682_apply_patch_list(rt5682, &i2c->dev); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + /* DMIC pin*/ + if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { + switch (rt5682->pdata.dmic1_data_pin) { + case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); + break; + + case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); + break; + } + + switch (rt5682->pdata.dmic1_clk_pin) { + case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); + break; + + case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); + break; + } + } + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, + RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); + + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + INIT_DELAYED_WORK(&rt5682->jd_check_work, + rt5682_jd_check_handler); + + if (i2c->irq) { + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_ONESHOT, "rt5682", rt5682); + if (ret) + dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); + } + + return devm_snd_soc_register_component(&i2c->dev, + &rt5682_soc_component_dev, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); +} + +static void rt5682_i2c_shutdown(struct i2c_client *client) +{ + struct rt5682_priv *rt5682 = i2c_get_clientdata(client); + + rt5682_reset(rt5682); +} + +static const struct of_device_id rt5682_of_match[] = { + {.compatible = "realtek,rt5682i"}, + {}, +}; +MODULE_DEVICE_TABLE(of, rt5682_of_match); + +static const struct acpi_device_id rt5682_acpi_match[] = { + {"10EC5682", 0,}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); + +static const struct i2c_device_id rt5682_i2c_id[] = { + {"rt5682", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); + +static struct i2c_driver rt5682_i2c_driver = { + .driver = { + .name = "rt5682", + .of_match_table = rt5682_of_match, + .acpi_match_table = rt5682_acpi_match, + }, + .probe = rt5682_i2c_probe, + .shutdown = rt5682_i2c_shutdown, + .id_table = rt5682_i2c_id, +}; +module_i2c_driver(rt5682_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT5682 driver"); +MODULE_AUTHOR("Bard Liao <bardliao(a)realtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c index 99dd48d2a1d6..4cecc5ce545c 100644 --- a/sound/soc/codecs/rt5682-sdw.c +++ b/sound/soc/codecs/rt5682-sdw.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/mutex.h> #include <linux/soundwire/sdw.h> @@ -28,7 +29,461 @@ #include <sound/tlv.h> #include "rt5682.h" -#include "rt5682-sdw.h" + +#define RT5682_SDW_ADDR_L 0x3000 +#define RT5682_SDW_ADDR_H 0x3001 +#define RT5682_SDW_DATA_L 0x3004 +#define RT5682_SDW_DATA_H 0x3005 +#define RT5682_SDW_CMD 0x3008 + +static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val) +{ + struct device *dev = context; + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + unsigned int data_l, data_h; + + regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); + regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h); + regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l); + + *val = (data_h << 8) | data_l; + + dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val); + + return 0; +} + +static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val) +{ + struct device *dev = context; + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + + regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff); + regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff)); + + dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); + + return 0; +} + +static const struct regmap_config rt5682_sdw_indirect_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = RT5682_REG_NUM, + .use_single_read = true, + .use_single_write = true, + .reg_read = rt5682_sdw_read, + .reg_write = rt5682_sdw_write, +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, + int direction) +{ + struct sdw_stream_data *stream; + + if (!sdw_stream) + return 0; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; + + /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + dai->playback_dma_data = stream; + else + dai->capture_dma_data = stream; + + return 0; +} + +static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_data *stream; + int retval, port, num_channels; + unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + + stream = snd_soc_dai_get_dma_data(dai, substream); + if (!stream) + return -ENOMEM; + + if (!rt5682->slave) + return -EINVAL; + + /* SoundWire specific configuration */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + direction = SDW_DATA_DIR_RX; + port = 1; + } else { + direction = SDW_DATA_DIR_TX; + port = 2; + } + + stream_config.frame_rate = params_rate(params); + stream_config.ch_count = params_channels(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + + num_channels = params_channels(params); + port_config.ch_mask = (1 << (num_channels)) - 1; + port_config.num = port; + + retval = sdw_stream_add_slave(rt5682->slave, &stream_config, + &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + switch (params_rate(params)) { + case 48000: + val_p = RT5682_SDW_REF_1_48K; + val_c = RT5682_SDW_REF_2_48K; + break; + case 96000: + val_p = RT5682_SDW_REF_1_96K; + val_c = RT5682_SDW_REF_2_96K; + break; + case 192000: + val_p = RT5682_SDW_REF_1_192K; + val_c = RT5682_SDW_REF_2_192K; + break; + case 32000: + val_p = RT5682_SDW_REF_1_32K; + val_c = RT5682_SDW_REF_2_32K; + break; + case 24000: + val_p = RT5682_SDW_REF_1_24K; + val_c = RT5682_SDW_REF_2_24K; + break; + case 16000: + val_p = RT5682_SDW_REF_1_16K; + val_c = RT5682_SDW_REF_2_16K; + break; + case 12000: + val_p = RT5682_SDW_REF_1_12K; + val_c = RT5682_SDW_REF_2_12K; + break; + case 8000: + val_p = RT5682_SDW_REF_1_8K; + val_c = RT5682_SDW_REF_2_8K; + break; + case 44100: + val_p = RT5682_SDW_REF_1_44K; + val_c = RT5682_SDW_REF_2_44K; + break; + case 88200: + val_p = RT5682_SDW_REF_1_88K; + val_c = RT5682_SDW_REF_2_88K; + break; + case 176400: + val_p = RT5682_SDW_REF_1_176K; + val_c = RT5682_SDW_REF_2_176K; + break; + case 22050: + val_p = RT5682_SDW_REF_1_22K; + val_c = RT5682_SDW_REF_2_22K; + break; + case 11025: + val_p = RT5682_SDW_REF_1_11K; + val_c = RT5682_SDW_REF_2_11K; + break; + default: + return -EINVAL; + } + + if (params_rate(params) <= 48000) { + osr_p = RT5682_DAC_OSR_D_8; + osr_c = RT5682_ADC_OSR_D_8; + } else if (params_rate(params) <= 96000) { + osr_p = RT5682_DAC_OSR_D_4; + osr_c = RT5682_ADC_OSR_D_4; + } else { + osr_p = RT5682_DAC_OSR_D_2; + osr_c = RT5682_ADC_OSR_D_2; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, + RT5682_SDW_REF_1_MASK, val_p); + regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, + RT5682_DAC_OSR_MASK, osr_p); + } else { + regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, + RT5682_SDW_REF_2_MASK, val_c); + regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, + RT5682_ADC_OSR_MASK, osr_c); + } + + return retval; +} + +static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!rt5682->slave) + return -EINVAL; + + sdw_stream_remove_slave(rt5682->slave, stream->sdw_stream); + return 0; +} + +static struct snd_soc_dai_ops rt5682_sdw_ops = { + .hw_params = rt5682_sdw_hw_params, + .hw_free = rt5682_sdw_hw_free, + .set_sdw_stream = rt5682_set_sdw_stream, + .shutdown = rt5682_sdw_shutdown, +}; + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, + { + .name = "rt5682-sdw", + .id = RT5682_SDW, + .playback = { + .stream_name = "SDW Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "SDW Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_sdw_ops, + }, +}; + +static int rt5682_sdw_init(struct device *dev, struct regmap *regmap, + struct sdw_slave *slave) +{ + struct rt5682_priv *rt5682; + int ret; + + rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL); + if (!rt5682) + return -ENOMEM; + + dev_set_drvdata(dev, rt5682); + rt5682->slave = slave; + rt5682->sdw_regmap = regmap; + rt5682->is_sdw = true; + + rt5682->regmap = devm_regmap_init(dev, NULL, dev, + &rt5682_sdw_indirect_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + rt5682->hw_init = false; + rt5682->first_hw_init = false; + + mutex_init(&rt5682->calibrate_mutex); + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + + ret = devm_snd_soc_register_component(dev, + &rt5682_soc_component_dev, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); + dev_dbg(&slave->dev, "%s\n", __func__); + + return ret; +} + +static int rt5682_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct rt5682_priv *rt5682 = dev_get_drvdata(dev); + int ret = 0; + unsigned int val; + + if (rt5682->hw_init) + return 0; + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + dev_err(dev, "Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!rt5682->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + if (rt5682->first_hw_init) { + regcache_cache_only(rt5682->regmap, false); + regcache_cache_bypass(rt5682->regmap, true); + } + + rt5682_calibrate(rt5682); + + if (rt5682->first_hw_init) { + regcache_cache_bypass(rt5682->regmap, false); + regcache_mark_dirty(rt5682->regmap); + regcache_sync(rt5682->regmap); + + /* volatile registers */ + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, + RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); + + goto reinit; + } + + rt5682_apply_patch_list(rt5682, dev); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); + + /* Soundwire */ + regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600); + regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f); + regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000); + regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000); + regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK, + RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK, + RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW); + + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, + RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); + regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042); + regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3, + RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); + regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1, + RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); + regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, + RT5682_POW_IRQ | RT5682_POW_JDH | + RT5682_POW_ANA, RT5682_POW_IRQ | + RT5682_POW_JDH | RT5682_POW_ANA); + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, + RT5682_PWR_JDH, RT5682_PWR_JDH); + regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, + RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK, + RT5682_JD1_EN | RT5682_JD1_IRQ_PUL); + +reinit: + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + + /* Mark Slave initialization complete */ + rt5682->hw_init = true; + rt5682->first_hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + + return ret; +} static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg) { @@ -46,7 +501,7 @@ static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg) } } -const struct regmap_config rt5682_sdw_regmap = { +static const struct regmap_config rt5682_sdw_regmap = { .name = "sdw", .reg_bits = 32, .val_bits = 8, diff --git a/sound/soc/codecs/rt5682-sdw.h b/sound/soc/codecs/rt5682-sdw.h deleted file mode 100644 index 76e6f607066e..000000000000 --- a/sound/soc/codecs/rt5682-sdw.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only - * - * rt5682-sdw.h -- RT5682 SDW ALSA SoC audio driver - * - * Copyright 2019 Realtek Semiconductor Corp. - * Author: Oder Chiou <oder_chiou(a)realtek.com> - */ - -#ifndef __RT5682_SDW_H__ -#define __RT5682_SDW_H__ - -#define RT5682_SDW_ADDR_L 0x3000 -#define RT5682_SDW_ADDR_H 0x3001 -#define RT5682_SDW_DATA_L 0x3004 -#define RT5682_SDW_DATA_H 0x3005 -#define RT5682_SDW_CMD 0x3008 - -#define RT5682_PROBE_TIMEOUT 2000 - -#endif /* __RT5682_SDW_H__ */ diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 046e6110de73..372833936208 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -12,7 +12,6 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/pm_runtime.h> -#include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/acpi.h> @@ -31,22 +30,6 @@ #include "rl6231.h" #include "rt5682.h" -#include "rt5682-sdw.h" - -static const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = { - "AVDD", - "MICVDD", - "VBAT", -}; - -static const struct rt5682_platform_data i2s_default_platform_data = { - .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, - .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, - .jd_src = RT5682_JD1, - .btndet_delay = 16, - .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", - .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", -}; static const struct reg_sequence patch_list[] = { {RT5682_HP_IMP_SENS_CTRL_19, 0x1000}, @@ -55,7 +38,18 @@ static const struct reg_sequence patch_list[] = { {RT5682_PLL2_INTERNAL, 0x8266}, }; -static const struct reg_default rt5682_reg[] = { +void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev) +{ + int ret; + + ret = regmap_multi_reg_write(rt5682->regmap, patch_list, + ARRAY_SIZE(patch_list)); + if (ret) + dev_warn(dev, "Failed to apply regmap patch: %d\n", ret); +} +EXPORT_SYMBOL_GPL(rt5682_apply_patch_list); + +const struct reg_default rt5682_reg[RT5682_REG_NUM] = { {0x0002, 0x8080}, {0x0003, 0x8000}, {0x0005, 0x0000}, @@ -375,8 +369,9 @@ static const struct reg_default rt5682_reg[] = { {0x03f2, 0x0800}, {0x03f3, 0x0800}, }; +EXPORT_SYMBOL_GPL(rt5682_reg); -static bool rt5682_volatile_register(struct device *dev, unsigned int reg) +bool rt5682_volatile_register(struct device *dev, unsigned int reg) { switch (reg) { case RT5682_RESET: @@ -403,8 +398,9 @@ static bool rt5682_volatile_register(struct device *dev, unsigned int reg) return false; } } +EXPORT_SYMBOL_GPL(rt5682_volatile_register); -static bool rt5682_readable_register(struct device *dev, unsigned int reg) +bool rt5682_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case RT5682_RESET: @@ -733,6 +729,7 @@ static bool rt5682_readable_register(struct device *dev, unsigned int reg) return false; } } +EXPORT_SYMBOL_GPL(rt5682_readable_register); static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); @@ -800,12 +797,13 @@ static SOC_ENUM_SINGLE_DECL(rt5682_dacr_enum, static const struct snd_kcontrol_new rt5682_dac_r_mux = SOC_DAPM_ENUM("DAC R Mux", rt5682_dacr_enum); -static void rt5682_reset(struct rt5682_priv *rt5682) +void rt5682_reset(struct rt5682_priv *rt5682) { regmap_write(rt5682->regmap, RT5682_RESET, 0); if (!rt5682->is_sdw) regmap_write(rt5682->regmap, RT5682_I2C_MODE, 1); } +EXPORT_SYMBOL_GPL(rt5682_reset); /** * rt5682_sel_asrc_clk_src - select ASRC clock source for a set of filters @@ -910,8 +908,7 @@ static void rt5682_enable_push_button_irq(struct snd_soc_component *component, * * Returns detect status. */ -static int rt5682_headset_detect(struct snd_soc_component *component, - int jack_insert) +int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert) { struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); struct snd_soc_dapm_context *dapm = &component->dapm; @@ -972,35 +969,7 @@ static int rt5682_headset_detect(struct snd_soc_component *component, dev_dbg(component->dev, "jack_type = %d\n", rt5682->jack_type); return rt5682->jack_type; } - -static irqreturn_t rt5682_irq(int irq, void *data) -{ - struct rt5682_priv *rt5682 = data; - - mod_delayed_work(system_power_efficient_wq, - &rt5682->jack_detect_work, msecs_to_jiffies(250)); - - return IRQ_HANDLED; -} - -static void rt5682_jd_check_handler(struct work_struct *work) -{ - struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, - jd_check_work.work); - - if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) - & RT5682_JDH_RS_MASK) { - /* jack out */ - rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); - - snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, - SND_JACK_HEADSET | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3); - } else { - schedule_delayed_work(&rt5682->jd_check_work, 500); - } -} +EXPORT_SYMBOL_GPL(rt5682_headset_detect); static int rt5682_set_jack_detect(struct snd_soc_component *component, struct snd_soc_jack *hs_jack, void *data) @@ -1077,7 +1046,7 @@ static int rt5682_set_jack_detect(struct snd_soc_component *component, return 0; } -static void rt5682_jack_detect_handler(struct work_struct *work) +void rt5682_jack_detect_handler(struct work_struct *work) { struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, jack_detect_work.work); @@ -1160,6 +1129,7 @@ static void rt5682_jack_detect_handler(struct work_struct *work) mutex_unlock(&rt5682->calibrate_mutex); } +EXPORT_SYMBOL_GPL(rt5682_jack_detect_handler); static const struct snd_kcontrol_new rt5682_snd_controls[] = { /* DAC Digital Volume */ @@ -2899,7 +2869,8 @@ static int rt5682_resume(struct snd_soc_component *component) regcache_cache_only(rt5682->regmap, false); regcache_sync(rt5682->regmap); - rt5682_irq(0, rt5682); + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); return 0; } @@ -2908,270 +2879,22 @@ static int rt5682_resume(struct snd_soc_component *component) #define rt5682_resume NULL #endif -#define RT5682_STEREO_RATES SNDRV_PCM_RATE_8000_192000 -#define RT5682_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) - -static const struct snd_soc_dai_ops rt5682_aif1_dai_ops = { +const struct snd_soc_dai_ops rt5682_aif1_dai_ops = { .hw_params = rt5682_hw_params, .set_fmt = rt5682_set_dai_fmt, .set_tdm_slot = rt5682_set_tdm_slot, .set_bclk_ratio = rt5682_set_bclk1_ratio, }; +EXPORT_SYMBOL_GPL(rt5682_aif1_dai_ops); -static const struct snd_soc_dai_ops rt5682_aif2_dai_ops = { +const struct snd_soc_dai_ops rt5682_aif2_dai_ops = { .hw_params = rt5682_hw_params, .set_fmt = rt5682_set_dai_fmt, .set_bclk_ratio = rt5682_set_bclk2_ratio, }; +EXPORT_SYMBOL_GPL(rt5682_aif2_dai_ops); -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) -struct sdw_stream_data { - struct sdw_stream_runtime *sdw_stream; -}; - -static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, - int direction) -{ - struct sdw_stream_data *stream; - - if (!sdw_stream) - return 0; - - stream = kzalloc(sizeof(*stream), GFP_KERNEL); - if (!stream) - return -ENOMEM; - - stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; - - /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ - if (direction == SNDRV_PCM_STREAM_PLAYBACK) - dai->playback_dma_data = stream; - else - dai->capture_dma_data = stream; - - return 0; -} - -static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sdw_stream_data *stream; - - stream = snd_soc_dai_get_dma_data(dai, substream); - snd_soc_dai_set_dma_data(dai, substream, NULL); - kfree(stream); -} - -static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_component *component = dai->component; - struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); - struct sdw_stream_config stream_config; - struct sdw_port_config port_config; - enum sdw_data_direction direction; - struct sdw_stream_data *stream; - int retval, port, num_channels; - unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0; - - dev_dbg(dai->dev, "%s %s", __func__, dai->name); - - stream = snd_soc_dai_get_dma_data(dai, substream); - if (!stream) - return -ENOMEM; - - if (!rt5682->slave) - return -EINVAL; - - /* SoundWire specific configuration */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - direction = SDW_DATA_DIR_RX; - port = 1; - } else { - direction = SDW_DATA_DIR_TX; - port = 2; - } - - stream_config.frame_rate = params_rate(params); - stream_config.ch_count = params_channels(params); - stream_config.bps = snd_pcm_format_width(params_format(params)); - stream_config.direction = direction; - - num_channels = params_channels(params); - port_config.ch_mask = (1 << (num_channels)) - 1; - port_config.num = port; - - retval = sdw_stream_add_slave(rt5682->slave, &stream_config, - &port_config, 1, stream->sdw_stream); - if (retval) { - dev_err(dai->dev, "Unable to configure port\n"); - return retval; - } - - switch (params_rate(params)) { - case 48000: - val_p = RT5682_SDW_REF_1_48K; - val_c = RT5682_SDW_REF_2_48K; - break; - case 96000: - val_p = RT5682_SDW_REF_1_96K; - val_c = RT5682_SDW_REF_2_96K; - break; - case 192000: - val_p = RT5682_SDW_REF_1_192K; - val_c = RT5682_SDW_REF_2_192K; - break; - case 32000: - val_p = RT5682_SDW_REF_1_32K; - val_c = RT5682_SDW_REF_2_32K; - break; - case 24000: - val_p = RT5682_SDW_REF_1_24K; - val_c = RT5682_SDW_REF_2_24K; - break; - case 16000: - val_p = RT5682_SDW_REF_1_16K; - val_c = RT5682_SDW_REF_2_16K; - break; - case 12000: - val_p = RT5682_SDW_REF_1_12K; - val_c = RT5682_SDW_REF_2_12K; - break; - case 8000: - val_p = RT5682_SDW_REF_1_8K; - val_c = RT5682_SDW_REF_2_8K; - break; - case 44100: - val_p = RT5682_SDW_REF_1_44K; - val_c = RT5682_SDW_REF_2_44K; - break; - case 88200: - val_p = RT5682_SDW_REF_1_88K; - val_c = RT5682_SDW_REF_2_88K; - break; - case 176400: - val_p = RT5682_SDW_REF_1_176K; - val_c = RT5682_SDW_REF_2_176K; - break; - case 22050: - val_p = RT5682_SDW_REF_1_22K; - val_c = RT5682_SDW_REF_2_22K; - break; - case 11025: - val_p = RT5682_SDW_REF_1_11K; - val_c = RT5682_SDW_REF_2_11K; - break; - default: - return -EINVAL; - } - - if (params_rate(params) <= 48000) { - osr_p = RT5682_DAC_OSR_D_8; - osr_c = RT5682_ADC_OSR_D_8; - } else if (params_rate(params) <= 96000) { - osr_p = RT5682_DAC_OSR_D_4; - osr_c = RT5682_ADC_OSR_D_4; - } else { - osr_p = RT5682_DAC_OSR_D_2; - osr_c = RT5682_ADC_OSR_D_2; - } - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, - RT5682_SDW_REF_1_MASK, val_p); - regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, - RT5682_DAC_OSR_MASK, osr_p); - } else { - regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, - RT5682_SDW_REF_2_MASK, val_c); - regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, - RT5682_ADC_OSR_MASK, osr_c); - } - - return retval; -} - -static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_component *component = dai->component; - struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); - struct sdw_stream_data *stream = - snd_soc_dai_get_dma_data(dai, substream); - - if (!rt5682->slave) - return -EINVAL; - - sdw_stream_remove_slave(rt5682->slave, stream->sdw_stream); - return 0; -} - -static struct snd_soc_dai_ops rt5682_sdw_ops = { - .hw_params = rt5682_sdw_hw_params, - .hw_free = rt5682_sdw_hw_free, - .set_sdw_stream = rt5682_set_sdw_stream, - .shutdown = rt5682_sdw_shutdown, -}; -#endif - -static struct snd_soc_dai_driver rt5682_dai[] = { - { - .name = "rt5682-aif1", - .id = RT5682_AIF1, - .playback = { - .stream_name = "AIF1 Playback", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .capture = { - .stream_name = "AIF1 Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_aif1_dai_ops, - }, - { - .name = "rt5682-aif2", - .id = RT5682_AIF2, - .capture = { - .stream_name = "AIF2 Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_aif2_dai_ops, - }, -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) - { - .name = "rt5682-sdw", - .id = RT5682_SDW, - .playback = { - .stream_name = "SDW Playback", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .capture = { - .stream_name = "SDW Capture", - .channels_min = 1, - .channels_max = 2, - .rates = RT5682_STEREO_RATES, - .formats = RT5682_FORMATS, - }, - .ops = &rt5682_sdw_ops, - }, -#endif -}; - -static const struct snd_soc_component_driver soc_component_dev_rt5682 = { +const struct snd_soc_component_driver rt5682_soc_component_dev = { .probe = rt5682_probe, .remove = rt5682_remove, .suspend = rt5682_suspend, @@ -3190,56 +2913,9 @@ static const struct snd_soc_component_driver soc_component_dev_rt5682 = { .endianness = 1, .non_legacy_dai_naming = 1, }; +EXPORT_SYMBOL_GPL(rt5682_soc_component_dev); -static const struct regmap_config rt5682_regmap = { - .reg_bits = 16, - .val_bits = 16, - .max_register = RT5682_I2C_MODE, - .volatile_reg = rt5682_volatile_register, - .readable_reg = rt5682_readable_register, - .cache_type = REGCACHE_RBTREE, - .reg_defaults = rt5682_reg, - .num_reg_defaults = ARRAY_SIZE(rt5682_reg), - .use_single_read = true, - .use_single_write = true, -}; - -static const struct i2c_device_id rt5682_i2c_id[] = { - {"rt5682", 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); - -static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) -{ - - device_property_read_u32(dev, "realtek,dmic1-data-pin", - &rt5682->pdata.dmic1_data_pin); - device_property_read_u32(dev, "realtek,dmic1-clk-pin", - &rt5682->pdata.dmic1_clk_pin); - device_property_read_u32(dev, "realtek,jd-src", - &rt5682->pdata.jd_src); - device_property_read_u32(dev, "realtek,btndet-delay", - &rt5682->pdata.btndet_delay); - device_property_read_u32(dev, "realtek,dmic-clk-rate-hz", - &rt5682->pdata.dmic_clk_rate); - device_property_read_u32(dev, "realtek,dmic-delay-ms", - &rt5682->pdata.dmic_delay); - - rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node, - "realtek,ldo1-en-gpios", 0); - - if (device_property_read_string_array(dev, "clock-output-names", - rt5682->pdata.dai_clk_names, - RT5682_DAI_NUM_CLKS) < 0) - dev_warn(dev, "Using default DAI clk names: %s, %s\n", - rt5682->pdata.dai_clk_names[RT5682_DAI_WCLK_IDX], - rt5682->pdata.dai_clk_names[RT5682_DAI_BCLK_IDX]); - - return 0; -} - -static void rt5682_calibrate(struct rt5682_priv *rt5682) +void rt5682_calibrate(struct rt5682_priv *rt5682) { int value, count; @@ -3289,407 +2965,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682) mutex_unlock(&rt5682->calibrate_mutex); } - -#if IS_ENABLED(CONFIG_SND_SOC_RT5682_SDW) -static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val) -{ - struct device *dev = context; - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - unsigned int data_l, data_h; - - regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); - regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h); - regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l); - - *val = (data_h << 8) | data_l; - - dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val); - - return 0; -} - -static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val) -{ - struct device *dev = context; - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - - regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff); - regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff)); - - dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); - - return 0; -} - -static const struct regmap_config rt5682_sdw_regmap = { - .reg_bits = 16, - .val_bits = 16, - .max_register = RT5682_I2C_MODE, - .volatile_reg = rt5682_volatile_register, - .readable_reg = rt5682_readable_register, - .cache_type = REGCACHE_RBTREE, - .reg_defaults = rt5682_reg, - .num_reg_defaults = ARRAY_SIZE(rt5682_reg), - .use_single_read = true, - .use_single_write = true, - .reg_read = rt5682_sdw_read, - .reg_write = rt5682_sdw_write, -}; - -int rt5682_sdw_init(struct device *dev, struct regmap *regmap, - struct sdw_slave *slave) -{ - struct rt5682_priv *rt5682; - int ret; - - rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL); - if (!rt5682) - return -ENOMEM; - - dev_set_drvdata(dev, rt5682); - rt5682->slave = slave; - rt5682->sdw_regmap = regmap; - rt5682->is_sdw = true; - - rt5682->regmap = devm_regmap_init(dev, NULL, dev, &rt5682_sdw_regmap); - if (IS_ERR(rt5682->regmap)) { - ret = PTR_ERR(rt5682->regmap); - dev_err(dev, "Failed to allocate register map: %d\n", - ret); - return ret; - } - - /* - * Mark hw_init to false - * HW init will be performed when device reports present - */ - rt5682->hw_init = false; - rt5682->first_hw_init = false; - - mutex_init(&rt5682->calibrate_mutex); - INIT_DELAYED_WORK(&rt5682->jack_detect_work, - rt5682_jack_detect_handler); - - ret = devm_snd_soc_register_component(dev, &soc_component_dev_rt5682, - rt5682_dai, ARRAY_SIZE(rt5682_dai)); - - dev_dbg(&slave->dev, "%s\n", __func__); - - return ret; -} -EXPORT_SYMBOL_GPL(rt5682_sdw_init); - -int rt5682_io_init(struct device *dev, struct sdw_slave *slave) -{ - struct rt5682_priv *rt5682 = dev_get_drvdata(dev); - int ret = 0; - unsigned int val; - - if (rt5682->hw_init) - return 0; - - regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); - if (val != DEVICE_ID) { - dev_err(dev, "Device with ID register %x is not rt5682\n", val); - return -ENODEV; - } - - /* - * PM runtime is only enabled when a Slave reports as Attached - */ - if (!rt5682->first_hw_init) { - /* set autosuspend parameters */ - pm_runtime_set_autosuspend_delay(&slave->dev, 3000); - pm_runtime_use_autosuspend(&slave->dev); - - /* update count of parent 'active' children */ - pm_runtime_set_active(&slave->dev); - - /* make sure the device does not suspend immediately */ - pm_runtime_mark_last_busy(&slave->dev); - - pm_runtime_enable(&slave->dev); - } - - pm_runtime_get_noresume(&slave->dev); - - if (rt5682->first_hw_init) { - regcache_cache_only(rt5682->regmap, false); - regcache_cache_bypass(rt5682->regmap, true); - } - - rt5682_calibrate(rt5682); - - if (rt5682->first_hw_init) { - regcache_cache_bypass(rt5682->regmap, false); - regcache_mark_dirty(rt5682->regmap); - regcache_sync(rt5682->regmap); - - /* volatile registers */ - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, - RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); - - goto reinit; - } - - ret = regmap_multi_reg_write(rt5682->regmap, patch_list, - ARRAY_SIZE(patch_list)); - if (ret) - dev_warn(dev, "Failed to apply regmap patch: %d\n", ret); - - regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); - - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, - RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, - RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); - regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); - regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); - regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, - RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); - regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, - RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); - regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, - RT5682_PM_HP_MASK, RT5682_PM_HP_HV); - - /* Soundwire */ - regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600); - regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f); - regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000); - regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000); - regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK, - RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK, - RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW); - - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, - RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); - regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042); - regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3, - RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); - regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1, - RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); - regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, - RT5682_POW_IRQ | RT5682_POW_JDH | - RT5682_POW_ANA, RT5682_POW_IRQ | - RT5682_POW_JDH | RT5682_POW_ANA); - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, - RT5682_PWR_JDH, RT5682_PWR_JDH); - regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, - RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK, - RT5682_JD1_EN | RT5682_JD1_IRQ_PUL); - -reinit: - mod_delayed_work(system_power_efficient_wq, - &rt5682->jack_detect_work, msecs_to_jiffies(250)); - - /* Mark Slave initialization complete */ - rt5682->hw_init = true; - rt5682->first_hw_init = true; - - pm_runtime_mark_last_busy(&slave->dev); - pm_runtime_put_autosuspend(&slave->dev); - - dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); - - return ret; -} -EXPORT_SYMBOL_GPL(rt5682_io_init); -#endif - -static int rt5682_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); - struct rt5682_priv *rt5682; - int i, ret; - unsigned int val; - - rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), - GFP_KERNEL); - if (!rt5682) - return -ENOMEM; - - i2c_set_clientdata(i2c, rt5682); - - rt5682->pdata = i2s_default_platform_data; - - if (pdata) - rt5682->pdata = *pdata; - else - rt5682_parse_dt(rt5682, &i2c->dev); - - rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); - if (IS_ERR(rt5682->regmap)) { - ret = PTR_ERR(rt5682->regmap); - dev_err(&i2c->dev, "Failed to allocate register map: %d\n", - ret); - return ret; - } - - for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) - rt5682->supplies[i].supply = rt5682_supply_names[i]; - - ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), - rt5682->supplies); - if (ret) { - dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); - return ret; - } - - ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), - rt5682->supplies); - if (ret) { - dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); - return ret; - } - - if (gpio_is_valid(rt5682->pdata.ldo1_en)) { - if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, - GPIOF_OUT_INIT_HIGH, "rt5682")) - dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); - } - - /* Sleep for 300 ms miniumum */ - usleep_range(300000, 350000); - - regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); - usleep_range(10000, 15000); - - regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); - if (val != DEVICE_ID) { - dev_err(&i2c->dev, - "Device with ID register %x is not rt5682\n", val); - return -ENODEV; - } - - mutex_init(&rt5682->calibrate_mutex); - rt5682_calibrate(rt5682); - - ret = regmap_multi_reg_write(rt5682->regmap, patch_list, - ARRAY_SIZE(patch_list)); - if (ret) - dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret); - - regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); - - /* DMIC pin*/ - if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { - switch (rt5682->pdata.dmic1_data_pin) { - case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); - break; - - case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); - break; - - default: - dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); - break; - } - - switch (rt5682->pdata.dmic1_clk_pin) { - case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); - break; - - case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); - break; - - default: - dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); - break; - } - } - - regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, - RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, - RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); - regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); - regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, - RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, - RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); - regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); - regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, - RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); - regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, - RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); - regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, - RT5682_PM_HP_MASK, RT5682_PM_HP_HV); - regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, - RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); - - INIT_DELAYED_WORK(&rt5682->jack_detect_work, - rt5682_jack_detect_handler); - INIT_DELAYED_WORK(&rt5682->jd_check_work, - rt5682_jd_check_handler); - - if (i2c->irq) { - ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, - rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING - | IRQF_ONESHOT, "rt5682", rt5682); - if (ret) - dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); - } - - return devm_snd_soc_register_component(&i2c->dev, - &soc_component_dev_rt5682, - rt5682_dai, ARRAY_SIZE(rt5682_dai)); -} - -static void rt5682_i2c_shutdown(struct i2c_client *client) -{ - struct rt5682_priv *rt5682 = i2c_get_clientdata(client); - - rt5682_reset(rt5682); -} - -#ifdef CONFIG_OF -static const struct of_device_id rt5682_of_match[] = { - {.compatible = "realtek,rt5682i"}, - {}, -}; -MODULE_DEVICE_TABLE(of, rt5682_of_match); -#endif - -#ifdef CONFIG_ACPI -static const struct acpi_device_id rt5682_acpi_match[] = { - {"10EC5682", 0,}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); -#endif - -static struct i2c_driver __maybe_unused rt5682_i2c_driver = { - .driver = { - .name = "rt5682", - .of_match_table = of_match_ptr(rt5682_of_match), - .acpi_match_table = ACPI_PTR(rt5682_acpi_match), - }, - .probe = rt5682_i2c_probe, - .shutdown = rt5682_i2c_shutdown, - .id_table = rt5682_i2c_id, -}; - -#ifdef CONFIG_I2C -module_i2c_driver(rt5682_i2c_driver); -#endif +EXPORT_SYMBOL_GPL(rt5682_calibrate); MODULE_DESCRIPTION("ASoC RT5682 driver"); MODULE_AUTHOR("Bard Liao <bardliao(a)realtek.com>"); diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h index 0baeece84ec4..65a211ab58f4 100644 --- a/sound/soc/codecs/rt5682.h +++ b/sound/soc/codecs/rt5682.h @@ -1337,6 +1337,13 @@ #define RT5682_SAR_SOUR_BTN (0x3f) #define RT5682_SAR_SOUR_TYPE (0x0) +/* soundwire timeout */ +#define RT5682_PROBE_TIMEOUT 2000 + + +#define RT5682_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT5682_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) /* System Clock Source */ enum { @@ -1420,8 +1427,24 @@ struct rt5682_priv { int rt5682_sel_asrc_clk_src(struct snd_soc_component *component, unsigned int filter_mask, unsigned int clk_src); -int rt5682_sdw_init(struct device *dev, struct regmap *regmap, - struct sdw_slave *slave); -int rt5682_io_init(struct device *dev, struct sdw_slave *slave); + +void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev); + +int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert); +void rt5682_jack_detect_handler(struct work_struct *work); + +bool rt5682_volatile_register(struct device *dev, unsigned int reg); +bool rt5682_readable_register(struct device *dev, unsigned int reg); + +int rt5682_register_component(struct device *dev); +void rt5682_calibrate(struct rt5682_priv *rt5682); +void rt5682_reset(struct rt5682_priv *rt5682); + +#define RT5682_REG_NUM 318 +extern const struct reg_default rt5682_reg[RT5682_REG_NUM]; + +extern const struct snd_soc_dai_ops rt5682_aif1_dai_ops; +extern const struct snd_soc_dai_ops rt5682_aif2_dai_ops; +extern const struct snd_soc_component_driver rt5682_soc_component_dev; #endif /* __RT5682_H__ */ diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 91ce347b3a45..46073c04364a 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -430,7 +430,7 @@ config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH depends on I2C && ACPI && GPIOLIB depends on MFD_INTEL_LPSS || COMPILE_TEST depends on SND_HDA_CODEC_HDMI - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_MAX98357A select SND_SOC_DMIC select SND_SOC_HDAC_HDMI @@ -468,7 +468,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH depends on SND_HDA_CODEC_HDMI select SND_SOC_MAX98373 select SND_SOC_RT1015 - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_DMIC select SND_SOC_HDAC_HDMI help @@ -511,7 +511,7 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH depends on MFD_INTEL_LPSS || COMPILE_TEST depends on SND_HDA_CODEC_HDMI select SND_SOC_RT1011 - select SND_SOC_RT5682 + select SND_SOC_RT5682_I2C select SND_SOC_DMIC select SND_SOC_HDAC_HDMI help -- 2.26.2

3 4

[PATCH 0/4] Kconfig updates for DMIC and SOF HDMI support
by Ranjani Sridharan 27 May '20

27 May '20

This series provides the following updtes to the Intel machine driver Kconfig: 1. The first patch adds the explicit dependency on GPIOLIB when SND_SOC_DMIC is selected. 2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy HDA codec driver for HDMI support in SOF. The last 3 three patches make the required changes to account for this. Libin Yang (3): ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common hdmi ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition Pierre-Louis Bossart (1): ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is used sound/soc/intel/boards/Kconfig | 51 ++++++++++++++------------- sound/soc/intel/boards/sof_pcm512x.c | 9 ----- sound/soc/intel/boards/sof_sdw.c | 8 ----- sound/soc/intel/boards/sof_sdw_hdmi.c | 7 ---- 4 files changed, 26 insertions(+), 49 deletions(-) -- 2.17.1

3 9

[PATCH] ASoC: amd: rt5682: fix soundwire dependencies
by Arnd Bergmann 27 May '20

27 May '20

A built-in SND_SOC_AMD_RV_RT5682_MACH driver can not select SND_SOC_RT5682 when that is linking against a modular soundwire layer: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) This one is a bit awkward because the AMD driver itself has no interest in soundwire, but I could not come up with a cleaner workaround so far. Maybe the SND_SOC_RT5682 driver itself can be reworked so that the common part depends on neither soundwire nor i2c and the two bus specific options can be loadable modules when the common part is built-in. Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/amd/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/amd/Kconfig b/sound/soc/amd/Kconfig index 77ffdb41bee5..878cf97b050e 100644 --- a/sound/soc/amd/Kconfig +++ b/sound/soc/amd/Kconfig @@ -34,6 +34,7 @@ config SND_SOC_AMD_RV_RT5682_MACH select SND_SOC_CROS_EC_CODEC select I2C_CROS_EC_TUNNEL depends on SND_SOC_AMD_ACP3x && I2C && CROS_EC + depends on SOUNDWIRE || !SOUNDWIRE help This option enables machine driver for RT5682 and MAX9835. -- 2.26.2

2 2

[PATCH] ASoC: img-spdif-out: Fix runtime PM imbalance on error
by Dinghao Liu 27 May '20

27 May '20

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/img/img-spdif-out.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/img/img-spdif-out.c b/sound/soc/img/img-spdif-out.c index 456c462d52fb..b1d8e4535726 100644 --- a/sound/soc/img/img-spdif-out.c +++ b/sound/soc/img/img-spdif-out.c @@ -370,8 +370,10 @@ static int img_spdif_out_probe(struct platform_device *pdev) goto err_pm_disable; } ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); goto err_suspend; + } img_spdif_out_writel(spdif, IMG_SPDIF_OUT_CTL_FS_MASK, IMG_SPDIF_OUT_CTL); -- 2.17.1

2 1

[PATCH] ASoC: img-spdif-in: Fix runtime PM imbalance on error
by Dinghao Liu 27 May '20

27 May '20

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/img/img-spdif-in.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/img/img-spdif-in.c b/sound/soc/img/img-spdif-in.c index fd639f4d082b..46ff8a3621d5 100644 --- a/sound/soc/img/img-spdif-in.c +++ b/sound/soc/img/img-spdif-in.c @@ -753,8 +753,10 @@ static int img_spdif_in_probe(struct platform_device *pdev) goto err_pm_disable; } ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); goto err_suspend; + } rst = devm_reset_control_get_exclusive(&pdev->dev, "rst"); if (IS_ERR(rst)) { -- 2.17.1

2 1

[PATCH -next] ASoC: mmp-sspa: Fix return value check in asoc_mmp_sspa_probe()
by Wei Yongjun 27 May '20

27 May '20

In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> --- sound/soc/pxa/mmp-sspa.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c index 3e37ab625f8d..4255851c71c1 100644 --- a/sound/soc/pxa/mmp-sspa.c +++ b/sound/soc/pxa/mmp-sspa.c @@ -493,13 +493,13 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) return -ENODEV; sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30); - if (IS_ERR(sspa->rx_base)) - return PTR_ERR(sspa->rx_base); + if (!sspa->rx_base) + return -ENOMEM; sspa->tx_base = devm_ioremap(&pdev->dev, res->start + 0x80, 0x30); - if (IS_ERR(sspa->tx_base)) - return PTR_ERR(sspa->tx_base); + if (!sspa->tx_base) + return -ENOMEM; sspa->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(sspa->clk))

2 1

[PATCH] ASoC: tlv320adcx140: Fix warnings when using W=1
by Dan Murphy 27 May '20

27 May '20

Fix the warnings when using the W=1 compiler flag. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’: sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 570 | int ret = 0; | ^~~ This was set but only used in case where the reset GPIO is not defined. Have the function return the value of ret. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’: sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF || | ^ sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V || This condition will not occur since if the dt property is not set then the *_source variable is set to the default value. So there is no way that *_source can be less then 0. Which is what each #define is set to. The code just needs to make sure that the dt property is not out of the upper bounds. Reported-by: kbuild test robot <lkp(a)intel.com> Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tlv320adcx140.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 472d759ba8a3..2fe0df3b7550 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -582,7 +582,7 @@ static int adcx140_reset(struct adcx140_priv *adcx140) /* 8.4.2: wait >= 10 ms after entering sleep mode. */ usleep_range(10000, 100000); - return 0; + return ret; } static int adcx140_hw_params(struct snd_pcm_substream *substream, @@ -772,8 +772,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component) if (ret) bias_source = ADCX140_MIC_BIAS_VAL_VREF; - if (bias_source < ADCX140_MIC_BIAS_VAL_VREF || - bias_source > ADCX140_MIC_BIAS_VAL_AVDD) { + if (bias_source > ADCX140_MIC_BIAS_VAL_AVDD) { dev_err(adcx140->dev, "Mic Bias source value is invalid\n"); return -EINVAL; } @@ -783,8 +782,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component) if (ret) vref_source = ADCX140_MIC_BIAS_VREF_275V; - if (vref_source < ADCX140_MIC_BIAS_VREF_275V || - vref_source > ADCX140_MIC_BIAS_VREF_1375V) { + if (vref_source > ADCX140_MIC_BIAS_VREF_1375V) { dev_err(adcx140->dev, "Mic Bias source value is invalid\n"); return -EINVAL; } -- 2.26.2

2 1

[PATCH] ASoC: wm8962: Fix runtime PM imbalance on error
by Dinghao Liu 27 May '20

27 May '20

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/codecs/wm8962.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index d9d59f45833f..bb806b195d10 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2881,6 +2881,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s ret = pm_runtime_get_sync(component->dev); if (ret < 0) { + pm_runtime_put_noidle(component->dev); dev_err(component->dev, "Failed to resume device: %d\n", ret); return ret; } @@ -3013,6 +3014,7 @@ static irqreturn_t wm8962_irq(int irq, void *data) ret = pm_runtime_get_sync(dev); if (ret < 0) { + pm_runtime_put_noidle(dev); dev_err(dev, "Failed to resume: %d\n", ret); return IRQ_NONE; } -- 2.17.1

3 2

[PATCH 0/8] ASoC: SOF: finalize Baytrail/CherryTrail support
by Pierre-Louis Bossart 27 May '20

27 May '20

This long-overdue patchset adds missing system suspend/resume support and hardens the IPC to solve module load/unload issues on specific devices such as Cyan Chromebook. With this series SOF is finally iso-feature with the legacy driver. Thanks to Ranjani and Keyon for the basic patches and Enric for testing. The last part needed for Baytrail/Cherrytrail is simplification of the driver/card names and turn-key UCM support (on-going work with Jaroslav). Keyon Jie (1): ASoC: SOF: Intel: BYT: harden IPC initialization and handling Pierre-Louis Bossart (3): ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspend ASoC: Intel: byt/cht: add .pm_ops ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handler Ranjani Sridharan (4): ASoC: SOF: Intel: byt: Add PM callbacks ASoC: SOF: pm: handle resume on legacy Intel platforms ASoC: SOF: ipc: ignore DSP replies received when they are not expected ASoC: SOF: Intel: BYT: add .remove op sound/soc/intel/boards/bytcht_cx2072x.c | 3 + sound/soc/intel/boards/bytcht_da7213.c | 3 + sound/soc/intel/boards/bytcht_es8316.c | 3 + sound/soc/intel/boards/bytcr_rt5640.c | 7 +- sound/soc/intel/boards/bytcr_rt5651.c | 6 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 3 + sound/soc/intel/boards/cht_bsw_nau8824.c | 3 + sound/soc/intel/boards/cht_bsw_rt5645.c | 3 + sound/soc/intel/boards/cht_bsw_rt5672.c | 3 + sound/soc/sof/intel/byt.c | 116 ++++++++++++++----- sound/soc/sof/ipc.c | 9 +- sound/soc/sof/pm.c | 8 +- sound/soc/sof/sof-priv.h | 2 +- 13 files changed, 122 insertions(+), 47 deletions(-) base-commit: 0d71a5cf691a8226151ceeb79fb872925f053df5 -- 2.20.1

2 9

[PATCH] ASoC: dapm: Move dai_link widgets to runtime to fix use after free
by Charles Keepax 27 May '20

27 May '20

The newly added CODEC to CODEC DAI link widget pointers in snd_soc_dai_link are better placed in snd_soc_pcm_runtime. snd_soc_dai_link is really intended for static configuration of the DAI, and the runtime for dynamic data. The snd_soc_dai_link structures are not destroyed if the card is unbound. The widgets are cleared up on unbind, however if the card is rebound as the snd_soc_dai_link structures are reused these pointers will be left at their old values, causing access to freed memory. Fixes: 595571cca4de ("ASoC: dapm: Fix regression introducing multiple copies of DAI widgets") Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- include/sound/soc.h | 6 +++--- sound/soc/soc-dapm.c | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index a7fa642601081..ba07cdfcdcee4 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -801,9 +801,6 @@ struct snd_soc_dai_link { const struct snd_soc_pcm_stream *params; unsigned int num_params; - struct snd_soc_dapm_widget *playback_widget; - struct snd_soc_dapm_widget *capture_widget; - unsigned int dai_fmt; /* format to set on init */ enum snd_soc_dpcm_trigger trigger[2]; /* trigger type for DPCM */ @@ -1169,6 +1166,9 @@ struct snd_soc_pcm_runtime { unsigned int num_codecs; unsigned int num_cpus; + struct snd_soc_dapm_widget *playback_widget; + struct snd_soc_dapm_widget *capture_widget; + struct delayed_work delayed_work; void (*close_delayed_work_func)(struct snd_soc_pcm_runtime *rtd); #ifdef CONFIG_DEBUG_FS diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a4de3e4bc2eff..fc40f283a2480 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4340,16 +4340,16 @@ static void dapm_connect_dai_pair(struct snd_soc_card *card, codec = codec_dai->playback_widget; if (playback_cpu && codec) { - if (dai_link->params && !dai_link->playback_widget) { + if (dai_link->params && !rtd->playback_widget) { substream = streams[SNDRV_PCM_STREAM_PLAYBACK].substream; dai = snd_soc_dapm_new_dai(card, substream, "playback"); if (IS_ERR(dai)) goto capture; - dai_link->playback_widget = dai; + rtd->playback_widget = dai; } dapm_connect_dai_routes(&card->dapm, cpu_dai, playback_cpu, - dai_link->playback_widget, + rtd->playback_widget, codec_dai, codec); } @@ -4358,16 +4358,16 @@ static void dapm_connect_dai_pair(struct snd_soc_card *card, codec = codec_dai->capture_widget; if (codec && capture_cpu) { - if (dai_link->params && !dai_link->capture_widget) { + if (dai_link->params && !rtd->capture_widget) { substream = streams[SNDRV_PCM_STREAM_CAPTURE].substream; dai = snd_soc_dapm_new_dai(card, substream, "capture"); if (IS_ERR(dai)) return; - dai_link->capture_widget = dai; + rtd->capture_widget = dai; } dapm_connect_dai_routes(&card->dapm, codec_dai, codec, - dai_link->capture_widget, + rtd->capture_widget, cpu_dai, capture_cpu); } } -- 2.11.0

2 1

Re: [PATCH 1/2] dt-bindings: ASoC: renesas,rsnd: Add r8a7742 support
by Mark Brown 27 May '20

27 May '20

On Wed, May 27, 2020 at 12:32:28PM +0100, Lad, Prabhakar wrote: > On Wed, May 27, 2020 at 12:25 PM Mark Brown <broonie(a)kernel.org> wrote: > > > + - "renesas,rcar_sound-r8a7742" (RZ/G1H) > > I'd expect a matching patch adding this compatible to the driver. > The Renesas R-Car sound for RZ/G1H is identical to the R-Car Gen2 > family. So no driver change is needed and the fallback compatible > value "renesas,rcar_sound-gen2" will be used in the SOC DT. Then the patch to add the compatible string will be trivial.

1 0

Add new codec supported for ALC287
by Kailang 27 May '20

27 May '20

Hi Takashi, Attach patch was new codec supported. Many Thanks. BR, Kailang

2 1

Alsa Midi Driver Question/Issue
by liebrecht＠grossmann-venter.com 27 May '20

27 May '20

This is not really a straight forward user question and thereby I post it in the developer forum. My Problem: I use Alsa/Jack/Pulseaudio to run quite an extensive audio interface to DAW with involved Jack routings of both Audio and Midi. The system runs like greased lightning and I can do things on Linux that I could never do on windows period. The problem is that there exist applicatio9ns that is not ALSA/JACK Midi friendly. One such Application is Bitwig for Linux 1) Bitwig absolutely requires to have exclusive access to a USB pad Controller in order to recognise the controller. 2) We all know that the Alsa Midi driver forwards ALL Midi devices it finds to Jack where the aj2midid daemon provides a bridge to jack and the midi devices are then elegantly routed with jack to jack enabled programs. The alsa midi and jack bridge is a thing of beauty. 3) However Bitwig to be able to use a midi pad controller DEMANDS that you DISABLE alsa midi driver before it recognizes the midi controller. 4) This is very unfortunate and very W$ndish approach to devices. 5) So at the moment I can either use Bitwig with a pad controller and absolutely no other midi through Alsa/Jack will work, or my alsa/jack routings work but I cannot use Bitwig with a Midi Controller. My Question 1) Is it in any way possible to configure the Alsa Midi driver tgo ignore a specific Midi device in order that my Alsa/Jack routings can be used in conjunction with Bitwig using its pad-controller. 2) To summarize my question, I need to somehow blacklist the midi controller to not be touched or accessed ihn any way. Basically totally forget about its existence. 3) I am sure this must be possible as there are a lot of W$ndish style programs like this developed to need exclusive access to a midi device. 4) I tried to convince the developers of Bitwig to make Bitwig Jack aware, but it is seemingly not going to happen. That would have been the right way. I sincerely hope you will have a recommendation I can work on and impliment. Thank you.

2 1

[PATCH] ALSA: usb-audio: Clean up quirk entries with macros
by Takashi Iwai 27 May '20

27 May '20

Introduced a couple of macros to simplify some quirk entries. Just cosmetic, no functional changes. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/quirks-table.h | 93 ++++++++++++++++-------------------------------- 1 file changed, 30 insertions(+), 63 deletions(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index eb89902a83be..5236f4d015c4 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -25,6 +25,21 @@ .idProduct = prod, \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC +#define QUIRK_RENAME_DEVICE(_vendor, _device) \ + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \ + .vendor_name = _vendor, \ + .product_name = _device, \ + .ifnum = QUIRK_NO_INTERFACE \ + } + +#define QUIRK_DEVICE_PROFILE(_vendor, _device, _profile) \ + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \ + .vendor_name = _vendor, \ + .product_name = _device, \ + .profile_name = _profile, \ + .ifnum = QUIRK_NO_INTERFACE \ + } + /* FTDI devices */ { USB_DEVICE(0x0403, 0xb8d8), @@ -61,20 +76,12 @@ /* Creative/E-Mu devices */ { USB_DEVICE(0x041e, 0x3010), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Creative Labs", - .product_name = "Sound Blaster MP3+", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Creative Labs", "Sound Blaster MP3+") }, /* Creative/Toshiba Multimedia Center SB-0500 */ { USB_DEVICE(0x041e, 0x3048), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Toshiba", - .product_name = "SB-0500", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Toshiba", "SB-0500") }, { /* E-Mu 0202 USB */ @@ -207,11 +214,7 @@ .idProduct = 0x0990, .bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Logitech, Inc.", - .product_name = "QuickCam Pro 9000", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Logitech, Inc.", "QuickCam Pro 9000") }, /* @@ -2596,11 +2599,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), }, { USB_DEVICE(0x0ccd, 0x0028), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "TerraTec", - .product_name = "Aureon5.1MkII", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("TerraTec", "Aureon5.1MkII") }, { USB_DEVICE(0x0ccd, 0x0035), @@ -2615,19 +2614,11 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Stanton/N2IT Final Scratch v1 device ('Scratchamp') */ { USB_DEVICE(0x103d, 0x0100), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Stanton", - .product_name = "ScratchAmp", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Stanton", "ScratchAmp") }, { USB_DEVICE(0x103d, 0x0101), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Stanton", - .product_name = "ScratchAmp", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Stanton", "ScratchAmp") }, /* Novation EMS devices */ @@ -2788,11 +2779,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), { /* aka. Serato Scratch Live DJ Box */ USB_DEVICE(0x13e5, 0x0001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Rane", - .product_name = "SL-1", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE("Rane", "SL-1") }, /* Native Instruments MK2 series */ @@ -3259,10 +3246,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), * is also used by the CM106 based cards, so make it unique. */ USB_DEVICE(0x0d8c, 0x0103), - .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { - .product_name = "Audio Advantage MicroII", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_RENAME_DEVICE(NULL, "Audio Advantage MicroII") }, /* disabled due to regression for other devices; @@ -3368,12 +3352,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), /* Dell WD15 Dock */ { USB_DEVICE(0x0bda, 0x4014), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Dell", - .product_name = "WD15 Dock", - .profile_name = "Dell-WD15-Dock", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_DEVICE_PROFILE("Dell", "WD15 Dock", "Dell-WD15-Dock") }, /* Dell WD19 Dock */ { @@ -3553,12 +3532,8 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), #define ALC1220_VB_DESKTOP(vend, prod) { \ USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \ - .vendor_name = "Realtek", \ - .product_name = "ALC1220-VB-DT", \ - .profile_name = "Realtek-ALC1220-VB-Desktop", \ - .ifnum = QUIRK_NO_INTERFACE \ - } \ + QUIRK_DEVICE_PROFILE("Realtek", "ALC1220-VB-DT", \ + "Realtek-ALC1220-VB-Desktop") \ } ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */ ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */ @@ -3574,21 +3549,13 @@ ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ */ { USB_DEVICE(0x0414, 0xa000), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Gigabyte", - .product_name = "Aorus Master Front Headphone", - .profile_name = "Gigabyte-Aorus-Master-Front-Headphone", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_DEVICE_PROFILE("Gigabyte", "Aorus Master Front Headphone", + "Gigabyte-Aorus-Master-Front-Headphone") }, { USB_DEVICE(0x0414, 0xa001), - .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { - .vendor_name = "Gigabyte", - .product_name = "Aorus Master Main Audio", - .profile_name = "Gigabyte-Aorus-Master-Main-Audio", - .ifnum = QUIRK_NO_INTERFACE - } + QUIRK_DEVICE_PROFILE("Gigabyte", "Aorus Master Main Audio", + "Gigabyte-Aorus-Master-Main-Audio") }, #undef USB_DEVICE_VENDOR_SPEC -- 2.16.4

1 0

[PATCH v2 0/2] ASoC topology header parsing refinement
by Keyon Jie 27 May '20

27 May '20

This small series is to optimize the header logging during the topology parsing. This is verified work fine on both SOF and SST drivers (bxt_rt298 with dfw_sst.bin). Change History: v2: - Change the internal used array to be 'static' to fix the issue reported by: kbuild test robot <lkp(a)intel.com> - Add testing coverage including Intel SST driver also. v1: - Initial version. Keyon Jie (2): ASoC: topology: refine and log the header in the correct pass ASoC: topology: remove the redundant pass checks sound/soc/soc-topology.c | 99 ++++++++++++++++++---------------------- 1 file changed, 44 insertions(+), 55 deletions(-) -- 2.25.1

3 10

[PATCH] ASoC: Intel: sst: Fix runtime PM imbalance in sst_power_control
by Dinghao Liu 27 May '20

27 May '20

When sst_load_fw() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/intel/atom/sst/sst_drv_interface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/atom/sst/sst_drv_interface.c b/sound/soc/intel/atom/sst/sst_drv_interface.c index 762495385d5c..3897985b254f 100644 --- a/sound/soc/intel/atom/sst/sst_drv_interface.c +++ b/sound/soc/intel/atom/sst/sst_drv_interface.c @@ -150,6 +150,7 @@ static int sst_power_control(struct device *dev, bool state) if ((ctx->sst_state == SST_RESET) && (usage_count == 1)) { ret = sst_load_fw(ctx); if (ret) { + pm_runtime_put_sync(dev); dev_err(dev, "FW download fail %d\n", ret); sst_set_fw_state_locked(ctx, SST_RESET); ret = sst_pm_runtime_put(ctx); -- 2.17.1

3 2

ucm2: Add profile for Chromebook Asus C300
by GitHub pull_request - opened 26 May '20

26 May '20

alsa-project/alsa-ucm-conf pull request #26 was opened from tiwai: ASUS Chromebook C300 alias Google QUAWKS is an Intel Baytrail platform with max98090 codec. This patch adds the basic UCM snippet for the max98090 codec and HiFi.conf for this model. Note that MIC2 is used for the headset mic. If another model with this codec uses a different ADC port, we'd need to create another profile snippet and rename the device. BugLink: https://apibugzilla.suse.com/show_bug.cgi?id=1171492 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/26 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/26.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] [v2] ASoC: ti: Fix runtime PM imbalance in omap2_mcbsp_set_clks_src
by Dinghao Liu 26 May '20

26 May '20

When clk_set_parent() returns an error code, a pairing runtime PM usage counter increment is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- Changelog: v2: - Fix this in a cleaner way. --- sound/soc/ti/omap-mcbsp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c index 3d41ca2238d4..d7406cc3c2a5 100644 --- a/sound/soc/ti/omap-mcbsp.c +++ b/sound/soc/ti/omap-mcbsp.c @@ -77,18 +77,15 @@ static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) pm_runtime_put_sync(mcbsp->dev); r = clk_set_parent(mcbsp->fclk, fck_src); - if (r) { + if (r) dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n", src); - clk_put(fck_src); - return r; - } pm_runtime_get_sync(mcbsp->dev); clk_put(fck_src); - return 0; + return r; } static irqreturn_t omap_mcbsp_irq_handler(int irq, void *data) -- 2.17.1

3 2

[PATCH] ASoC: fix semicolon.cocci warnings
by kbuild test robot 26 May '20

26 May '20

From: kbuild test robot <lkp(a)intel.com> sound/soc/codecs/zl38060.c:298:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 52e8a94baf90 ("ASoC: Add initial ZL38060 driver") CC: Sven Van Asbroeck <thesven73(a)gmail.com> Signed-off-by: kbuild test robot <lkp(a)intel.com> --- tree: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.8 head: f202272cabf276441174dc05ad8b94d3c1174877 commit: 52e8a94baf9026276fcdc9ff21a50dc2ca0bc94b [26/131] ASoC: Add initial ZL38060 driver zl38060.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/soc/codecs/zl38060.c +++ b/sound/soc/codecs/zl38060.c @@ -295,7 +295,7 @@ static int zl38_hw_params(struct snd_pcm break; default: return -EINVAL; - }; + } err = regmap_update_bits(priv->regmap, REG_TDMA_CFG_CLK, CFG_CLK_FSRATE_MASK, fsrate);

2 1

[PATCH] ASoC: tas2552: Fix runtime PM imbalance in tas2552_component_probe
by Dinghao Liu 26 May '20

26 May '20

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/codecs/tas2552.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c index 56671f21cfe5..d90e5f2b6f27 100644 --- a/sound/soc/codecs/tas2552.c +++ b/sound/soc/codecs/tas2552.c @@ -602,6 +602,7 @@ static int tas2552_component_probe(struct snd_soc_component *component) return 0; probe_fail: + pm_runtime_put_noidle(component->dev); gpiod_set_value(tas2552->enable_gpio, 0); regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), -- 2.17.1

2 1

[PATCH] ALSA: hwdep: fix a left shifting 1 by 31 UB bug
by Changming Liu 26 May '20

26 May '20

The "info.index" variable can be 31 in "1 << info.index". This might trigger an undefined behavior since 1 is signed. Fix this by casting 1 to 1u just to be sure "1u << 31" is defined. Signed-off-by: Changming Liu <liu.changm(a)northeastern.edu> --- sound/core/hwdep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index b412d3b3d5ff..21edb8ac95eb 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -216,12 +216,12 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw, if (info.index >= 32) return -EINVAL; /* check whether the dsp was already loaded */ - if (hw->dsp_loaded & (1 << info.index)) + if (hw->dsp_loaded & (1u << info.index)) return -EBUSY; err = hw->ops.dsp_load(hw, &info); if (err < 0) return err; - hw->dsp_loaded |= (1 << info.index); + hw->dsp_loaded |= (1u << info.index); return 0; } -- 2.17.1

2 3

[PATCH] ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround
by Takashi Iwai 26 May '20

26 May '20

We fixed the regression of the speaker volume for some Thinkpad models (e.g. T570) by the commit 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570"). Essentially it fixes the DAC / pin pairing by a static table. It was confirmed and merged to stable kernel later. Now, interestingly, we got another regression report for the very same model (T570) about the similar problem, and the commit above was the culprit. That is, by some reason, there are devices that prefer the DAC1, and another device DAC2! Unfortunately those have the same ID and we have no idea what can differentiate, in this patch, a new fixup model "tpt470-dock-fix" is provided, so that users with such a machine can apply it manually. When model=tpt470-dock-fix option is passed to snd-hda-intel module, it avoids the fixed DAC pairing and the DAC1 is assigned to the speaker like the earlier versions. Fixes: 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570") BugLink: https://apibugzilla.suse.com/show_bug.cgi?id=1172017 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 041d2a32059b..92c6e58c3862 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5484,18 +5484,9 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec, { 0x19, 0x21a11010 }, /* dock mic */ { } }; - /* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise - * the speaker output becomes too low by some reason on Thinkpads with - * ALC298 codec - */ - static const hda_nid_t preferred_pairs[] = { - 0x14, 0x03, 0x17, 0x02, 0x21, 0x02, - 0 - }; struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->gen.preferred_dacs = preferred_pairs; spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; snd_hda_apply_pincfgs(codec, pincfgs); } else if (action == HDA_FIXUP_ACT_INIT) { @@ -5508,6 +5499,23 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec, } } +static void alc_fixup_tpt470_dacs(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + /* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise + * the speaker output becomes too low by some reason on Thinkpads with + * ALC298 codec + */ + static const hda_nid_t preferred_pairs[] = { + 0x14, 0x03, 0x17, 0x02, 0x21, 0x02, + 0 + }; + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) + spec->gen.preferred_dacs = preferred_pairs; +} + static void alc_shutup_dell_xps13(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -6063,6 +6071,7 @@ enum { ALC700_FIXUP_INTEL_REFERENCE, ALC274_FIXUP_DELL_BIND_DACS, ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, + ALC298_FIXUP_TPT470_DOCK_FIX, ALC298_FIXUP_TPT470_DOCK, ALC255_FIXUP_DUMMY_LINEOUT_VERB, ALC255_FIXUP_DELL_HEADSET_MIC, @@ -6994,12 +7003,18 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC274_FIXUP_DELL_BIND_DACS }, - [ALC298_FIXUP_TPT470_DOCK] = { + [ALC298_FIXUP_TPT470_DOCK_FIX] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_tpt470_dock, .chained = true, .chain_id = ALC293_FIXUP_LENOVO_SPK_NOISE }, + [ALC298_FIXUP_TPT470_DOCK] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_tpt470_dacs, + .chained = true, + .chain_id = ALC298_FIXUP_TPT470_DOCK_FIX + }, [ALC255_FIXUP_DUMMY_LINEOUT_VERB] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -7638,6 +7653,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC292_FIXUP_TPT440_DOCK, .name = "tpt440-dock"}, {.id = ALC292_FIXUP_TPT440, .name = "tpt440"}, {.id = ALC292_FIXUP_TPT460, .name = "tpt460"}, + {.id = ALC298_FIXUP_TPT470_DOCK_FIX, .name = "tpt470-dock-fix"}, {.id = ALC298_FIXUP_TPT470_DOCK, .name = "tpt470-dock"}, {.id = ALC233_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"}, {.id = ALC700_FIXUP_INTEL_REFERENCE, .name = "alc700-ref"}, -- 2.16.4

2 2

[PATCH] ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio
by Takashi Iwai 26 May '20

26 May '20

Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices, a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC (USB ID 0414:a000). The latter serves solely for the headphone output on the front panel while the former serves for the rest I/Os (mostly for the I/Os in the rear panel but also including the front mic). Both chips do work more or less with the unmodified USB-audio driver, but there are a few glitches. The ALC1220-VB returns an error for an inquiry to some jacks, as already seen on other TRX40-based mobos. However this machine has a slightly incompatible configuration, hence the existing mapping cannot be used as is. Meanwhile the ESS chip seems working without any quirk. But since both audio devices don't provide any specific names, both cards appear as "USB-Audio", and it's quite confusing for users. This patch is an attempt to overcome those issues: - The specific mapping table for ALC1220-VB is provided, reducing the non-working nodes and renaming the badly chosen controls. The connector map isn't needed here unlike other TRX40 quirks. - For both USB IDs (0414:a000 and 0414:a001), provide specific card name strings, so that user-space can identify more easily; and more importantly, UCM profile can be applied to each. Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/mixer_maps.c | 19 +++++++++++++++++++ sound/usb/quirks-table.h | 25 +++++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index bfdc6ad52785..9af7aa93f6fa 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -397,6 +397,21 @@ static const struct usbmix_connector_map trx40_mobo_connector_map[] = { {} }; +/* Rear panel + front mic on Gigabyte TRX40 Aorus Master with ALC1220-VB */ +static const struct usbmix_name_map aorus_master_alc1220vb_map[] = { + { 17, NULL }, /* OT, IEC958?, disabled */ + { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */ + { 16, "Line Out" }, /* OT */ + { 22, "Line Out Playback" }, /* FU */ + { 7, "Line" }, /* IT */ + { 19, "Line Capture" }, /* FU */ + { 8, "Mic" }, /* IT */ + { 20, "Mic Capture" }, /* FU */ + { 9, "Front Mic" }, /* IT */ + { 21, "Front Mic Capture" }, /* FU */ + {} +}; + /* * Control map entries */ @@ -526,6 +541,10 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x1b1c, 0x0a42), .map = corsair_virtuoso_map, }, + { /* Gigabyte TRX40 Aorus Master (rear panel + front mic) */ + .id = USB_ID(0x0414, 0xa001), + .map = aorus_master_alc1220vb_map, + }, { /* Gigabyte TRX40 Aorus Pro WiFi */ .id = USB_ID(0x0414, 0xa002), .map = trx40_mobo_map, diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 6313c30f5c85..eb89902a83be 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3566,4 +3566,29 @@ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */ ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ #undef ALC1220_VB_DESKTOP +/* Two entries for Gigabyte TRX40 Aorus Master: + * TRX40 Aorus Master has two USB-audio devices, one for the front headphone + * with ESS SABRE9218 DAC chip, while another for the rest I/O (the rear + * panel and the front mic) with Realtek ALC1220-VB. + * Here we provide two distinct names for making UCM profiles easier. + */ +{ + USB_DEVICE(0x0414, 0xa000), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Gigabyte", + .product_name = "Aorus Master Front Headphone", + .profile_name = "Gigabyte-Aorus-Master-Front-Headphone", + .ifnum = QUIRK_NO_INTERFACE + } +}, +{ + USB_DEVICE(0x0414, 0xa001), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Gigabyte", + .product_name = "Aorus Master Main Audio", + .profile_name = "Gigabyte-Aorus-Master-Main-Audio", + .ifnum = QUIRK_NO_INTERFACE + } +}, + #undef USB_DEVICE_VENDOR_SPEC -- 2.16.4

1 0

[PATCH] ALSA: usb: mixer: volume quirk for ESS Technology Asus USB DAC
by Chris Chiu 26 May '20

26 May '20

The Asus USB DAC is a USB type-C audio dongle for connecting to the headset and headphone. The volume minimum value -23040 which is 0xa600 in hexadecimal with the resolution value 1 indicates this should be endianness issue caused by the firmware bug. Add a volume quirk to fix the volume control problem. Also fixes this warning: Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1 Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1 Signed-off-by: Chris Chiu <chiu(a)endlessm.com> --- sound/usb/mixer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 81b2db0edd5f..0b568a9fdab3 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1171,6 +1171,14 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 384; } break; + case USB_ID(0x0495, 0x3042): /* ESS Technology Asus USB DAC */ + if ((strstr(kctl->id.name, "Playback Volume") != NULL) || + strstr(kctl->id.name, "Capture Volume") != NULL) { + cval->min >>= 8; + cval->max = 0; + cval->res = 1; + } + break; } } -- 2.20.1

2 1

[Bug Report]Sound: sound/core/hwdep.c undefined result by left shifting 1 by 31
by Changming Liu 25 May '20

25 May '20

Hi Jaroslav, Takashi: Greetings, I'm a first year PhD student who is interested in using UBSan for linux. After some experiments, I found that in sound/core/hwdep.c function snd_hwdep_dsp_load there might be an undefined behavior that might cause unexpected result. More specifically, in this function,info was fetched from user space and, info.index was checked if it's greater than or equal to 32. If not then it's used as number of left shift bits to string literal 1. The problem is, since string literal 1 is by default signed int, so 1 << 31 cannot be represented as a valid integer and the result might be undefined across different platforms. So I guess change 1 to 1U might help? Due to the lack of knowledge of the interaction between this module and others, I'm not able to assess if this is critical or worth fixing. I'd appreciate if for your comment on this bug. This can help me understand UB a lot! Looking forward to your response. Best, Changming Liu

2 2

[PATCH v4 0/7] ASoC: add soc-link
by Kuninori Morimoto 25 May '20

25 May '20

Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This v4 patch-set creates new snd_soc_link_xxx() functions which handles dai_link related operation, and implmement these at new soc-link.c. v3 -> v4 - add Reviewed-by from Ranjani and Pierre-Louis - fix bisection error at [2/7] v2 -> v3 - add missing #include <sound/soc-link.h> in soc-link.c v1 -> v2 - #include <sound/soc-link.h> is added on each c source file instead of soc.h - not have extra error message after snd_soc_link_xxx(), because it already indicate it via snc_link_ret() - snd_soc_link_compr_xxx() doesn't have rtd parameter, because it can be created from cstream Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 27 +++++++ sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 46 ++++-------- sound/soc/soc-core.c | 18 ++--- sound/soc/soc-dai.c | 9 ++- sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 7 files changed, 219 insertions(+), 119 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1 Thank you for your help !! Best regards --- Kuninori Morimoto

2 8

[PATCH] ASoC: fsl: imx-audmix: Fix unused assignment to variable 'ret'
by Tang Bin 25 May '20

25 May '20

Omit unused initialized value, because 'ret' will be assigined by the function snd_soc_component_read(). Signed-off-by: Zhang Shengju <zhangshengju(a)cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/fsl/fsl_audmix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_audmix.c b/sound/soc/fsl/fsl_audmix.c index 5faecbeb5..8b9027f76 100644 --- a/sound/soc/fsl/fsl_audmix.c +++ b/sound/soc/fsl/fsl_audmix.c @@ -116,7 +116,7 @@ static int fsl_audmix_put_mix_clk_src(struct snd_kcontrol *kcontrol, struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; unsigned int *item = ucontrol->value.enumerated.item; unsigned int reg_val, val, mix_clk; - int ret = 0; + int ret; /* Get current state */ ret = snd_soc_component_read(comp, FSL_AUDMIX_CTR, &reg_val); @@ -159,7 +159,7 @@ static int fsl_audmix_put_out_src(struct snd_kcontrol *kcontrol, unsigned int *item = ucontrol->value.enumerated.item; u32 out_src, mix_clk; unsigned int reg_val, val, mask = 0, ctr = 0; - int ret = 0; + int ret; /* Get current state */ ret = snd_soc_component_read(comp, FSL_AUDMIX_CTR, &reg_val); -- 2.20.1.windows.1

2 1

[PATCH] ASoC: fsl_asrc: Fix -Wmissing-prototypes warning
by Shengjiu Wang 25 May '20

25 May '20

From: shengjiu wang <shengjiu.wang(a)nxp.com> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 sound/soc/fsl/fsl_asrc.c:557:18: warning: no previous prototype for function 'fsl_asrc_get_dma_channel' [-Wmissing-prototypes] struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) ^ sound/soc/fsl/fsl_asrc.c:557:1: note: declare 'static' if the function is not intended to be used outside of this translation unit struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) ^ static Fixes: be7bd03f0201 ("ASoC: fsl_asrc: Move common definition to fsl_asrc_common") Reported-by: kbuild test robot <lkp(a)intel.com> Signed-off-by: shengjiu wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_asrc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 7e2d598ffb81..d79d2c7f8d36 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -554,7 +554,8 @@ static void fsl_asrc_stop_pair(struct fsl_asrc_pair *pair) /** * Get DMA channel according to the pair and direction. */ -struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) +static struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, + bool dir) { struct fsl_asrc *asrc = pair->asrc; enum asrc_pair_index index = pair->index; @@ -564,7 +565,6 @@ struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) return dma_request_slave_channel(&asrc->pdev->dev, name); } -EXPORT_SYMBOL_GPL(fsl_asrc_get_dma_channel); static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) -- 2.21.0

2 1

[PATCH] ASoC: fsl_asrc: Merge suspend/resume function to runtime_suspend/resume
by Shengjiu Wang 25 May '20

25 May '20

With dedicated power domain for asrc, power can be disabled after probe and pm runtime suspend, then the value of all registers need to be restored in pm runtime resume. So we can merge suspend/resume function to runtime_suspend/resume function and enable regcache only in end of probe. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_asrc.c | 70 ++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 43 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 432936039de4..3ebbe15ac378 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -1100,6 +1100,7 @@ static int fsl_asrc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, asrc); pm_runtime_enable(&pdev->dev); spin_lock_init(&asrc->lock); + regcache_cache_only(asrc->regmap, true); ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component, &fsl_asrc_dai, 1); @@ -1117,6 +1118,7 @@ static int fsl_asrc_runtime_resume(struct device *dev) struct fsl_asrc *asrc = dev_get_drvdata(dev); struct fsl_asrc_priv *asrc_priv = asrc->private; int i, ret; + u32 asrctr; ret = clk_prepare_enable(asrc->mem_clk); if (ret) @@ -1135,6 +1137,24 @@ static int fsl_asrc_runtime_resume(struct device *dev) goto disable_asrck_clk; } + /* Stop all pairs provisionally */ + regmap_read(asrc->regmap, REG_ASRCTR, &asrctr); + regmap_update_bits(asrc->regmap, REG_ASRCTR, + ASRCTR_ASRCEi_ALL_MASK, 0); + + /* Restore all registers */ + regcache_cache_only(asrc->regmap, false); + regcache_mark_dirty(asrc->regmap); + regcache_sync(asrc->regmap); + + regmap_update_bits(asrc->regmap, REG_ASRCFG, + ASRCFG_NDPRi_ALL_MASK | ASRCFG_POSTMODi_ALL_MASK | + ASRCFG_PREMODi_ALL_MASK, asrc_priv->regcache_cfg); + + /* Restart enabled pairs */ + regmap_update_bits(asrc->regmap, REG_ASRCTR, + ASRCTR_ASRCEi_ALL_MASK, asrctr); + return 0; disable_asrck_clk: @@ -1155,6 +1175,11 @@ static int fsl_asrc_runtime_suspend(struct device *dev) struct fsl_asrc_priv *asrc_priv = asrc->private; int i; + regmap_read(asrc->regmap, REG_ASRCFG, + &asrc_priv->regcache_cfg); + + regcache_cache_only(asrc->regmap, true); + for (i = 0; i < ASRC_CLK_MAX_NUM; i++) clk_disable_unprepare(asrc_priv->asrck_clk[i]); if (!IS_ERR(asrc->spba_clk)) @@ -1166,51 +1191,10 @@ static int fsl_asrc_runtime_suspend(struct device *dev) } #endif /* CONFIG_PM */ -#ifdef CONFIG_PM_SLEEP -static int fsl_asrc_suspend(struct device *dev) -{ - struct fsl_asrc *asrc = dev_get_drvdata(dev); - struct fsl_asrc_priv *asrc_priv = asrc->private; - - regmap_read(asrc->regmap, REG_ASRCFG, - &asrc_priv->regcache_cfg); - - regcache_cache_only(asrc->regmap, true); - regcache_mark_dirty(asrc->regmap); - - return 0; -} - -static int fsl_asrc_resume(struct device *dev) -{ - struct fsl_asrc *asrc = dev_get_drvdata(dev); - struct fsl_asrc_priv *asrc_priv = asrc->private; - u32 asrctr; - - /* Stop all pairs provisionally */ - regmap_read(asrc->regmap, REG_ASRCTR, &asrctr); - regmap_update_bits(asrc->regmap, REG_ASRCTR, - ASRCTR_ASRCEi_ALL_MASK, 0); - - /* Restore all registers */ - regcache_cache_only(asrc->regmap, false); - regcache_sync(asrc->regmap); - - regmap_update_bits(asrc->regmap, REG_ASRCFG, - ASRCFG_NDPRi_ALL_MASK | ASRCFG_POSTMODi_ALL_MASK | - ASRCFG_PREMODi_ALL_MASK, asrc_priv->regcache_cfg); - - /* Restart enabled pairs */ - regmap_update_bits(asrc->regmap, REG_ASRCTR, - ASRCTR_ASRCEi_ALL_MASK, asrctr); - - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - static const struct dev_pm_ops fsl_asrc_pm = { SET_RUNTIME_PM_OPS(fsl_asrc_runtime_suspend, fsl_asrc_runtime_resume, NULL) - SET_SYSTEM_SLEEP_PM_OPS(fsl_asrc_suspend, fsl_asrc_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static const struct fsl_asrc_soc_data fsl_asrc_imx35_data = { -- 2.21.0

4 5

[PATCH v3 0/7] ASoC: add soc-link
by Kuninori Morimoto 25 May '20

25 May '20

Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This v3 patch-set creates new snd_soc_link_xxx() functions which handles dai_link related operation, and implmement these at new soc-link.c. v2 -> v3 - add missing #include <sound/soc-link.h> in soc-link.c v1 -> v2 - #include <sound/soc-link.h> is added on each c source file instead of soc.h - not have extra error message after snd_soc_link_xxx(), because it already indicate it via snc_link_ret() - snd_soc_link_compr_xxx() doesn't have rtd parameter, because it can be created from cstream Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 27 +++++++ sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 46 ++++-------- sound/soc/soc-core.c | 18 ++--- sound/soc/soc-dai.c | 9 ++- sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 7 files changed, 219 insertions(+), 119 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1 Thank you for your help !! Best regards --- Kuninori Morimoto

3 12

[PATCH 0/5] ASoC: SOF: extended manifest support for 5.8
by Kai Vehmanen 25 May '20

25 May '20

Hello, extended firmware manifest is a method to retrieve capabilities directly from the firmware file instead of routing the information via the DSP and reading it back via IPC (latter mechanism still supported but will be deprecated). This feature was briefly merged to 5.8 with the series sent on 2020-Apr-15, but due to a regression hit with exporting uapi headers, the patches got dropped. Here's an update with the uapi header issue fixed, rebased to latest 'for-5.8' and a few minor fixes. This has been sitting in sof-dev for some weeks and no further issues have been found. We also added a check for the uapi-export case to SOF CI, so such errors would not slip through again in the future. Tooling support to create firmware files with an extended header is available in SOF firmware repository (see the rimage tool) and this part is already merged. Karol Trzcinski (5): ASoC: SOF: loader: Adjust validation condition for fw_offset ASoC: SOF: Introduce extended manifest ASoC: SOF: ext_manifest: parse firmware version ASoC: SOF: ext_manifest: parse windows ASoC: SOF: ext_manifest: parse compiler version include/sound/sof/ext_manifest.h | 95 +++++++++++++++++ sound/soc/sof/intel/hda-loader.c | 2 +- sound/soc/sof/loader.c | 176 ++++++++++++++++++++++++++++++- 3 files changed, 269 insertions(+), 4 deletions(-) create mode 100644 include/sound/sof/ext_manifest.h -- 2.26.2

2 6

BUG: aplay (arecord) vu-meter overwrites /dev/null
by Clemens Koller 25 May '20

25 May '20

Hello! I am using the vu-meter of arecord v1.2.2 for monitoring remote computers audio input, which is usually (according to web search) done as: $ arecord -f S16_LE -r 44100 -c 2 --vumeter=stereo /dev/null This command was run as root, which is obviously not good, but still... every once in a while, I ran into some state, where /dev/null gets overwritten with (corrupted) audio data immediately upon start or after a long time (i.e. when max_filesize is reached). I would expect that this is not the desired behaviour. I was reading some code at: https://github.com/alsa-project/alsa-utils/blob/master/aplay/aplay.c#L3152 So I guess I could use: $ arecord -f S16_LE -r 44100 -c 2 --vumeter=stereo - /dev/null instead. But I am still not sure not to corrupt /dev/null when * max_filesize is reached or * we get a SIGUSR1 which will trigger recycle_capture_file Can somebody shed some light on how this is supposed to work? This code is very old and the documentation is still missing some bits and pieces there. There are also some commits trying to fix this behaviour - i.e. https://github.com/alsa-project/alsa-utils/commit/85827fbb642463ab724a9471a… I am able to assist with further debugging if necessary or dig deeper into the code. But I am not too familiar with this grown piece. Thank you very much! Clemens Koller

1 0

[PATCH] add I2C device and compatible ID
by Seven Lee 25 May '20

25 May '20

The nau8810 driver can also compatible with nau8812 and nau8814. Signed-off-by: Seven Lee <wtli(a)nuvoton.com> --- .../devicetree/bindings/sound/nau8812.txt | 16 ++++++++++++++++ .../devicetree/bindings/sound/nau8814.txt | 16 ++++++++++++++++ sound/soc/codecs/nau8810.c | 4 ++++ 3 files changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8812.txt create mode 100644 Documentation/devicetree/bindings/sound/nau8814.txt diff --git a/Documentation/devicetree/bindings/sound/nau8812.txt b/Documentation/devicetree/bindings/sound/nau8812.txt new file mode 100644 index 000000000000..7aab29586a1f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8812.txt @@ -0,0 +1,16 @@ +NAU8812 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8812" + + - reg : the I2C address of the device. + +Example: + +codec: nau8812@1a { + compatible = "nuvoton,nau8812"; + reg = <0x1a>; +}; diff --git a/Documentation/devicetree/bindings/sound/nau8814.txt b/Documentation/devicetree/bindings/sound/nau8814.txt new file mode 100644 index 000000000000..24bf2ba3d23b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8814.txt @@ -0,0 +1,16 @@ +NAU8814 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8814" + + - reg : the I2C address of the device. + +Example: + +codec: nau8814@1a { + compatible = "nuvoton,nau8814"; + reg = <0x1a>; +}; diff --git a/sound/soc/codecs/nau8810.c b/sound/soc/codecs/nau8810.c index efe9fb3fb225..33ebc6398426 100644 --- a/sound/soc/codecs/nau8810.c +++ b/sound/soc/codecs/nau8810.c @@ -895,6 +895,8 @@ static int nau8810_i2c_probe(struct i2c_client *i2c, static const struct i2c_device_id nau8810_i2c_id[] = { { "nau8810", 0 }, + { "nau8812", 0 }, + { "nau8814", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); @@ -902,6 +904,8 @@ MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); #ifdef CONFIG_OF static const struct of_device_id nau8810_of_match[] = { { .compatible = "nuvoton,nau8810", }, + { .compatible = "nuvoton,nau8812", }, + { .compatible = "nuvoton,nau8814", }, { } }; MODULE_DEVICE_TABLE(of, nau8810_of_match); -- 2.26.2

2 2

XHCI vs PCM2903B/PCM2904 part 2
by Rik van Riel 25 May '20

25 May '20

After a few more weeks of digging, I have come to the tentative conclusion that either the XHCI driver, or the USB sound driver, or both, fail to handle USB errors correctly. I have some questions at the bottom, after a (brief-ish) explanation of exactly what seems to go wrong. TL;DR: arecord from a misbehaving device can hang forever after a USB error, due to poll on /dev/snd/timer never returning. The details: under some mysterious circumstances, the PCM290x family sound chips can send more data than expected during an isochronous transfer, leading to a babble error. Those circumstances seem to in part depend on the USB host controller and/or the electrical environment, since the chips work just fine for most people. Receiving data past the end of the isochronous transfer window scheduled for a device results in the XHCI controller throwing a babble error, which moves the endpoint into halted state. This is followed by the host controller software sending a reset endpoint command, and moving the endpoint into stopped state, as specified on pages 164-165 of the XHCI specification. However, the USB sound driver seems to have no idea that this error happened. The function retire_capture_urb looks at the status of each isochronous frame, but seems to be under the assumption that the sound device just keeps on running. The function snd_complete_urb seems to only detect that the device is not running if usb_submit_urb returns a failure. err = usb_submit_urb(urb, GFP_ATOMIC); if (err == 0) return; usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err); if (ep->data_subs && ep->data_subs->pcm_substream) { substream = ep->data_subs->pcm_substream; snd_pcm_stop_xrun(substream); } However, the XHCI driver will happily submit an URB to a stopped device. Looking at the call trace usb_submit_urb -> xhci_urb_enqueue -> xhci_queue_isoc_tx_prepare -> prepare_ring, you can see this code: /* Make sure the endpoint has been added to xHC schedule */ switch (ep_state) { ... case EP_STATE_HALTED: xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n"); case EP_STATE_STOPPED: case EP_STATE_RUNNING: break; This leads me to a few questions: - should retire_capture_urb call snd_pcm_stop_xrun, or another function like it, if it sees certain errors in the iso frame in the URB? - should snd_complete_urb do something with these errors, too, in case they happen on the sync frames and not the data frames? - does the XHCI code need to ring the doorbell when submitting an URB to a stopped device, or is it always up to the higher-level driver to fully reset the device before it can do anything useful? - if a device in stopped state does not do anything useful, should usb_submit_urb return an error? - how should the USB sound driver recover from these occasional and/or one-off errors? stop the sound stream, or try to reinitialize the device and start recording again? I am willing to write patches and can test with my setup, but both the sound code and the USB code are new to me so I would like to know what direction I should go in :) -- All Rights Reversed.

4 8

[PATCH] ASoC: ti: Fix runtime PM imbalance in omap2_mcbsp_set_clks_src
by Dinghao Liu 25 May '20

25 May '20

When clk_set_parent() returns an error code, a pairing runtime PM usage counter increment is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu(a)zju.edu.cn> --- sound/soc/ti/omap-mcbsp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c index 3d41ca2238d4..84b4de9b670c 100644 --- a/sound/soc/ti/omap-mcbsp.c +++ b/sound/soc/ti/omap-mcbsp.c @@ -80,6 +80,7 @@ static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) if (r) { dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n", src); + pm_runtime_get_sync(mcbsp->dev); clk_put(fck_src); return r; } -- 2.17.1

3 2

[PATCH] ALSA: firewire-motu: add support for MOTU UltraLite-mk3 (FireWire only model)
by Takashi Sakamoto 25 May '20

25 May '20

UltraLite-mk3 was shipped 2008 by MOTU. This model has two lineups; FireWire-only and FireWire/USB2.0 Hybrid model. Additionally, the latter has two variants in respect of the type of IEEE 1394 connector; alpha and beta connector. This commit adds support for the FireWire-only model, which is already discontinued. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410353a bus_info_length 4, crc_length 16, crc 13626 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7 root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00035556 directory_length 3, crc 21846 42c 120001f2 specifier id 430 13000019 version 434 17100800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002f3c5 leaf_length 2, crc 62405 43c 0001f200 company_id 0001f2 | 440 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7 Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/motu/motu-protocol-v3.c | 9 +++++++++ sound/firewire/motu/motu.c | 1 + sound/firewire/motu/motu.h | 1 + 3 files changed, 11 insertions(+) diff --git a/sound/firewire/motu/motu-protocol-v3.c b/sound/firewire/motu/motu-protocol-v3.c index fd49d1fcf473..01a47ac7bb2d 100644 --- a/sound/firewire/motu/motu-protocol-v3.c +++ b/sound/firewire/motu/motu-protocol-v3.c @@ -290,6 +290,15 @@ const struct snd_motu_spec snd_motu_spec_828mk3 = { .rx_fixed_pcm_chunks = {14, 14, 10}, }; +const struct snd_motu_spec snd_motu_spec_ultralite_mk3 = { + .name = "UltraLiteMk3", + .protocol_version = SND_MOTU_PROTOCOL_V3, + .flags = SND_MOTU_SPEC_RX_MIDI_3RD_Q | + SND_MOTU_SPEC_TX_MIDI_3RD_Q, + .tx_fixed_pcm_chunks = {18, 14, 10}, + .rx_fixed_pcm_chunks = {14, 14, 14}, +}; + const struct snd_motu_spec snd_motu_spec_audio_express = { .name = "AudioExpress", .protocol_version = SND_MOTU_PROTOCOL_V3, diff --git a/sound/firewire/motu/motu.c b/sound/firewire/motu/motu.c index e5b6f634aa35..a4929c1302dc 100644 --- a/sound/firewire/motu/motu.c +++ b/sound/firewire/motu/motu.c @@ -189,6 +189,7 @@ static const struct ieee1394_device_id motu_id_table[] = { SND_MOTU_DEV_ENTRY(0x00000d, &snd_motu_spec_ultralite), SND_MOTU_DEV_ENTRY(0x00000f, &snd_motu_spec_8pre), SND_MOTU_DEV_ENTRY(0x000015, &snd_motu_spec_828mk3), // FireWire only. + SND_MOTU_DEV_ENTRY(0x000019, &snd_motu_spec_ultralite_mk3), // FireWire only. SND_MOTU_DEV_ENTRY(0x000035, &snd_motu_spec_828mk3), // Hybrid. SND_MOTU_DEV_ENTRY(0x000033, &snd_motu_spec_audio_express), SND_MOTU_DEV_ENTRY(0x000045, &snd_motu_spec_4pre), diff --git a/sound/firewire/motu/motu.h b/sound/firewire/motu/motu.h index e7948bf1f553..3d0236ee6716 100644 --- a/sound/firewire/motu/motu.h +++ b/sound/firewire/motu/motu.h @@ -118,6 +118,7 @@ extern const struct snd_motu_spec snd_motu_spec_ultralite; extern const struct snd_motu_spec snd_motu_spec_8pre; extern const struct snd_motu_spec snd_motu_spec_828mk3; +extern const struct snd_motu_spec snd_motu_spec_ultralite_mk3; extern const struct snd_motu_spec snd_motu_spec_audio_express; extern const struct snd_motu_spec snd_motu_spec_4pre; -- 2.25.1

2 1

[PATCH v2] ASoC: amd: put off registering mach platform_dev to avoid -517 err
by Hui Wang 25 May '20

25 May '20

If the mach driver's probe is called ahead of codec driver's probe, the kernel will print -517 error message although the audio still works finally: acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517 we could workaround this issue by moving the registration of mach platform_dev to plat driver's probe. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/amd/renoir/acp3x-pdm-dma.c | 13 +++++++++++++ sound/soc/amd/renoir/rn-pci-acp3x.c | 3 --- sound/soc/amd/renoir/rn_acp3x.h | 3 ++- 3 files changed, 15 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/renoir/acp3x-pdm-dma.c b/sound/soc/amd/renoir/acp3x-pdm-dma.c index 623dfd3ea705..46055c244998 100644 --- a/sound/soc/amd/renoir/acp3x-pdm-dma.c +++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c @@ -402,6 +402,7 @@ static int acp_pdm_audio_probe(struct platform_device *pdev) struct pdm_dev_data *adata; unsigned int irqflags; int status; + struct platform_device_info pdevinfo = {0}; if (!pdev->dev.platform_data) { dev_err(&pdev->dev, "platform_data not retrieved\n"); @@ -448,6 +449,16 @@ static int acp_pdm_audio_probe(struct platform_device *pdev) dev_err(&pdev->dev, "ACP PDM IRQ request failed\n"); return -ENODEV; } + + pdevinfo.name = "acp_pdm_mach"; + pdevinfo.id = 0; + pdevinfo.parent = &pdev->dev; + adata->m_pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(adata->m_pdev)) { + dev_err(&pdev->dev, "cannot register %s device\n", + pdevinfo.name); + return PTR_ERR(adata->m_pdev); + } pm_runtime_set_autosuspend_delay(&pdev->dev, ACP_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -457,7 +468,9 @@ static int acp_pdm_audio_probe(struct platform_device *pdev) static int acp_pdm_audio_remove(struct platform_device *pdev) { + struct pdm_dev_data *adata = dev_get_drvdata(&pdev->dev); pm_runtime_disable(&pdev->dev); + platform_device_unregister(adata->m_pdev); return 0; } diff --git a/sound/soc/amd/renoir/rn-pci-acp3x.c b/sound/soc/amd/renoir/rn-pci-acp3x.c index 859ed67b93cf..f5f450cbd249 100644 --- a/sound/soc/amd/renoir/rn-pci-acp3x.c +++ b/sound/soc/amd/renoir/rn-pci-acp3x.c @@ -230,9 +230,6 @@ static int snd_rn_acp_probe(struct pci_dev *pci, pdevinfo[1].name = "dmic-codec"; pdevinfo[1].id = 0; pdevinfo[1].parent = &pci->dev; - pdevinfo[2].name = "acp_pdm_mach"; - pdevinfo[2].id = 0; - pdevinfo[2].parent = &pci->dev; for (index = 0; index < ACP_DEVS; index++) { adata->pdev[index] = platform_device_register_full(&pdevinfo[index]); diff --git a/sound/soc/amd/renoir/rn_acp3x.h b/sound/soc/amd/renoir/rn_acp3x.h index 75228e306e0b..232eda4db055 100644 --- a/sound/soc/amd/renoir/rn_acp3x.h +++ b/sound/soc/amd/renoir/rn_acp3x.h @@ -7,7 +7,7 @@ #include "rn_chip_offset_byte.h" -#define ACP_DEVS 3 +#define ACP_DEVS 2 #define ACP_PHY_BASE_ADDRESS 0x1240000 #define ACP_REG_START 0x1240000 #define ACP_REG_END 0x1250200 @@ -59,6 +59,7 @@ struct pdm_dev_data { u32 pdm_irq; void __iomem *acp_base; struct snd_pcm_substream *capture_stream; + struct platform_device *m_pdev; }; struct pdm_stream_instance { -- 2.17.1

4 13

[PATCH v2] ALSA: line6: add hw monitor volume control for POD HD500
by Vasily Khoruzhick 24 May '20

24 May '20

Add hw monitor volume control for POD HD500. The same change may work for HD500X but I don't have it to test. Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- v2: clamp volume value to [0, ARRAY_SIZE() -1] in podhd_set_monitor_level() sound/usb/line6/driver.c | 3 +- sound/usb/line6/driver.h | 4 ++ sound/usb/line6/podhd.c | 124 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 129 insertions(+), 2 deletions(-) diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 7629116f570e..597a36c0a51d 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -97,7 +97,7 @@ static void line6_stop_listen(struct usb_line6 *line6) /* Send raw message in pieces of wMaxPacketSize bytes. */ -static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, +int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, int size) { int i, done = 0; @@ -132,6 +132,7 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, return done; } +EXPORT_SYMBOL(line6_send_raw_message); /* Notification of completion of asynchronous request transmission. diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 1a4e3700c80c..62c686bed0ca 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -108,6 +108,8 @@ enum { LINE6_CAP_CONTROL_MIDI = 1 << 4, /* device provides low-level information */ LINE6_CAP_CONTROL_INFO = 1 << 5, + /* device provides hardware monitoring volume control */ + LINE6_CAP_HWMON_CTL = 1 << 6, }; /* @@ -185,6 +187,8 @@ extern int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, unsigned datalen); extern int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number); +extern int line6_send_raw_message(struct usb_line6 *line6, + const char *buffer, int size); extern int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, int size); extern int line6_send_sysex_message(struct usb_line6 *line6, diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index e39dc85c355a..7cc2f1540c7c 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <sound/core.h> +#include <sound/control.h> #include <sound/pcm.h> #include "driver.h" @@ -37,6 +38,9 @@ struct usb_line6_podhd { /* Firmware version */ int firmware_version; + + /* Monitor level */ + int monitor_level; }; #define line6_to_podhd(x) container_of(x, struct usb_line6_podhd, line6) @@ -250,6 +254,115 @@ static void podhd_disconnect(struct usb_line6 *line6) } } +static const unsigned int float_zero_to_one_lookup[] = { +0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, +0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, +0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, +0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, +0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, +0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, +0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, +0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, +0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, +0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, +0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, +0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, +0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, +0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, +0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, +0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, +0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 +}; + +static void podhd_set_monitor_level(struct usb_line6_podhd *podhd, int value) +{ + unsigned int fl; + static const unsigned char msg[16] = { + /* Chunk is 0xc bytes (without first word) */ + 0x0c, 0x00, + /* First chunk in the message */ + 0x01, 0x00, + /* Message size is 2 4-byte words */ + 0x02, 0x00, + /* Unknown */ + 0x04, 0x41, + /* Unknown */ + 0x04, 0x00, 0x13, 0x00, + /* Volume, LE float32, 0.0 - 1.0 */ + 0x00, 0x00, 0x00, 0x00 + }; + unsigned char *buf; + + buf = kmalloc(sizeof(msg), GFP_ATOMIC); + memcpy(buf, msg, sizeof(msg)); + + if (value < 0) + value = 0; + + if (value >= ARRAY_SIZE(float_zero_to_one_lookup)) + value = ARRAY_SIZE(float_zero_to_one_lookup) - 1; + + fl = float_zero_to_one_lookup[value]; + + buf[12] = (fl >> 0) & 0xff; + buf[13] = (fl >> 8) & 0xff; + buf[14] = (fl >> 16) & 0xff; + buf[15] = (fl >> 24) & 0xff; + + line6_send_raw_message(&podhd->line6, buf, sizeof(msg)); + kfree(buf); + + podhd->monitor_level = value; +} + +/* control info callback */ +static int snd_podhd_control_monitor_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 100; + uinfo->value.integer.step = 1; + return 0; +} + +/* control get callback */ +static int snd_podhd_control_monitor_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); + + ucontrol->value.integer.value[0] = podhd->monitor_level; + return 0; +} + +/* control put callback */ +static int snd_podhd_control_monitor_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); + + if (ucontrol->value.integer.value[0] == podhd->monitor_level) + return 0; + + podhd_set_monitor_level(podhd, ucontrol->value.integer.value[0]); + return 1; +} + +/* control definition */ +static const struct snd_kcontrol_new podhd_control_monitor = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Monitor Playback Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_podhd_control_monitor_info, + .get = snd_podhd_control_monitor_get, + .put = snd_podhd_control_monitor_put +}; + /* Try to init POD HD device. */ @@ -298,6 +411,15 @@ static int podhd_init(struct usb_line6 *line6, return err; } + if (pod->line6.properties->capabilities & LINE6_CAP_HWMON_CTL) { + podhd_set_monitor_level(pod, 100); + err = snd_ctl_add(line6->card, + snd_ctl_new1(&podhd_control_monitor, + line6->line6pcm)); + if (err < 0) + return err; + } + if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO)) { /* register USB audio system directly */ return snd_card_register(line6->card); @@ -354,7 +476,7 @@ static const struct line6_properties podhd_properties_table[] = { .id = "PODHD500", .name = "POD HD500", .capabilities = LINE6_CAP_PCM | LINE6_CAP_CONTROL - | LINE6_CAP_HWMON, + | LINE6_CAP_HWMON | LINE6_CAP_HWMON_CTL, .altsetting = 1, .ctrl_if = 1, .ep_ctrl_r = 0x81, -- 2.26.2

2 3

Re: Dice firewire support
by Takashi Sakamoto 24 May '20

24 May '20

Hi Pascal, On Fri, May 22, 2020 at 12:51:45AM -0700, bomelp(a)gmail.com wrote: > Hi Takashi, > > Sorry if i bother you about my mail. > Actually, i try to enable a mytek dsd-192 dac via its firewire port on a debian 4.9.12. > I saw you worked on snd-dice module.Do you have a step-by-step documentation to help me do that ? > > Best regards > Pascal > France Although I don't test the device, Melvin Vermeeren added support for Mytek Stereo 192 DSD-DAC in Linux kernel v4.18 firstly. It's not available in your kernel. https://www.alsa-project.org/pipermail/alsa-devel/2018-May/136194.html If you can't work with the device just by loading snd-dice module in recent Linux kernel, please contact to me or Melvin ;) Regards Takashi Sakamoto

3 3

[PATCH] ALSA: line6: add hw monitor volume control for POD HD500
by Vasily Khoruzhick 23 May '20

23 May '20

Add hw monitor volume control for POD HD500. The same change may work for HD500X but I don't have it to test. Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- sound/usb/line6/driver.c | 3 +- sound/usb/line6/driver.h | 4 ++ sound/usb/line6/podhd.c | 124 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 129 insertions(+), 2 deletions(-) diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 7629116f570e..597a36c0a51d 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -97,7 +97,7 @@ static void line6_stop_listen(struct usb_line6 *line6) /* Send raw message in pieces of wMaxPacketSize bytes. */ -static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, +int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, int size) { int i, done = 0; @@ -132,6 +132,7 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, return done; } +EXPORT_SYMBOL(line6_send_raw_message); /* Notification of completion of asynchronous request transmission. diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 1a4e3700c80c..62c686bed0ca 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -108,6 +108,8 @@ enum { LINE6_CAP_CONTROL_MIDI = 1 << 4, /* device provides low-level information */ LINE6_CAP_CONTROL_INFO = 1 << 5, + /* device provides hardware monitoring volume control */ + LINE6_CAP_HWMON_CTL = 1 << 6, }; /* @@ -185,6 +187,8 @@ extern int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, unsigned datalen); extern int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number); +extern int line6_send_raw_message(struct usb_line6 *line6, + const char *buffer, int size); extern int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, int size); extern int line6_send_sysex_message(struct usb_line6 *line6, diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index e39dc85c355a..a40115625c01 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <sound/core.h> +#include <sound/control.h> #include <sound/pcm.h> #include "driver.h" @@ -37,6 +38,9 @@ struct usb_line6_podhd { /* Firmware version */ int firmware_version; + + /* Monitor level */ + int monitor_level; }; #define line6_to_podhd(x) container_of(x, struct usb_line6_podhd, line6) @@ -250,6 +254,115 @@ static void podhd_disconnect(struct usb_line6 *line6) } } +static const unsigned int float_zero_to_one_lookup[] = { +0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, +0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, +0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, +0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, +0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, +0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, +0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, +0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, +0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, +0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, +0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, +0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, +0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, +0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, +0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, +0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, +0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 +}; + +static void podhd_set_monitor_level(struct usb_line6_podhd *podhd, int value) +{ + unsigned int fl; + static const unsigned char msg[16] = { + /* Chunk is 0xc bytes (without first word) */ + 0x0c, 0x00, + /* First chunk in the message */ + 0x01, 0x00, + /* Message size is 2 4-byte words */ + 0x02, 0x00, + /* Unknown */ + 0x04, 0x41, + /* Unknown */ + 0x04, 0x00, 0x13, 0x00, + /* Volume, LE float32, 0.0 - 1.0 */ + 0x00, 0x00, 0x00, 0x00 + }; + unsigned char *buf; + + buf = kmalloc(sizeof(msg), GFP_ATOMIC); + memcpy(buf, msg, sizeof(msg)); + + if (value < 0) + value = 0; + + if (value > ARRAY_SIZE(float_zero_to_one_lookup)) + value = ARRAY_SIZE(float_zero_to_one_lookup); + + fl = float_zero_to_one_lookup[value]; + + buf[12] = (fl >> 0) & 0xff; + buf[13] = (fl >> 8) & 0xff; + buf[14] = (fl >> 16) & 0xff; + buf[15] = (fl >> 24) & 0xff; + + line6_send_raw_message(&podhd->line6, buf, sizeof(msg)); + kfree(buf); + + podhd->monitor_level = value; +} + +/* control info callback */ +static int snd_podhd_control_monitor_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 100; + uinfo->value.integer.step = 1; + return 0; +} + +/* control get callback */ +static int snd_podhd_control_monitor_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); + + ucontrol->value.integer.value[0] = podhd->monitor_level; + return 0; +} + +/* control put callback */ +static int snd_podhd_control_monitor_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); + + if (ucontrol->value.integer.value[0] == podhd->monitor_level) + return 0; + + podhd_set_monitor_level(podhd, ucontrol->value.integer.value[0]); + return 1; +} + +/* control definition */ +static const struct snd_kcontrol_new podhd_control_monitor = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Monitor Playback Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_podhd_control_monitor_info, + .get = snd_podhd_control_monitor_get, + .put = snd_podhd_control_monitor_put +}; + /* Try to init POD HD device. */ @@ -298,6 +411,15 @@ static int podhd_init(struct usb_line6 *line6, return err; } + if (pod->line6.properties->capabilities & LINE6_CAP_HWMON_CTL) { + podhd_set_monitor_level(pod, 100); + err = snd_ctl_add(line6->card, + snd_ctl_new1(&podhd_control_monitor, + line6->line6pcm)); + if (err < 0) + return err; + } + if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO)) { /* register USB audio system directly */ return snd_card_register(line6->card); @@ -354,7 +476,7 @@ static const struct line6_properties podhd_properties_table[] = { .id = "PODHD500", .name = "POD HD500", .capabilities = LINE6_CAP_PCM | LINE6_CAP_CONTROL - | LINE6_CAP_HWMON, + | LINE6_CAP_HWMON | LINE6_CAP_HWMON_CTL, .altsetting = 1, .ctrl_if = 1, .ep_ctrl_r = 0x81, -- 2.26.2

1 1

[PATCH v2] firewire: Remove function callback casts
by Oscar Carter 23 May '20

23 May '20

In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, remove all the function callback casts. To do this, modify the "fw_iso_context_create" function prototype adding a new parameter for the multichannel callback. Also, fix all the function calls accordingly. In the "fw_iso_context_create" function return an error code if both callback parameters are NULL and also set the "ctx->callback.sc" explicity to NULL in this case. It is not necessary set to NULL the "ctx->callback.mc" variable because this and "ctx->callback.sc" are an union and setting one implies setting the other one to the same value. Signed-off-by: Oscar Carter <oscar.carter(a)gmx.com> --- Changelog v1->v2 -Set explicity to NULL the "ctx->callback.sc" variable and return an error code in "fw_iso_context_create" function if both callback parameters are NULL as Lev R. Oshvang suggested. -Modify the commit changelog accordingly. drivers/firewire/core-cdev.c | 12 +++++++----- drivers/firewire/core-iso.c | 14 ++++++++++++-- drivers/firewire/net.c | 2 +- drivers/media/firewire/firedtv-fw.c | 3 ++- include/linux/firewire.h | 3 ++- sound/firewire/amdtp-stream.c | 2 +- sound/firewire/isight.c | 4 ++-- 7 files changed, 27 insertions(+), 13 deletions(-) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 6e291d8f3a27..cc368b35be2e 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -957,7 +957,8 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) { struct fw_cdev_create_iso_context *a = &arg->create_iso_context; struct fw_iso_context *context; - fw_iso_callback_t cb; + fw_iso_callback_t cb_sc = NULL; + fw_iso_mc_callback_t cb_mc = NULL; int ret; BUILD_BUG_ON(FW_CDEV_ISO_CONTEXT_TRANSMIT != FW_ISO_CONTEXT_TRANSMIT || @@ -970,7 +971,7 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) if (a->speed > SCODE_3200 || a->channel > 63) return -EINVAL; - cb = iso_callback; + cb_sc = iso_callback; break; case FW_ISO_CONTEXT_RECEIVE: @@ -978,11 +979,11 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) a->channel > 63) return -EINVAL; - cb = iso_callback; + cb_sc = iso_callback; break; case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: - cb = (fw_iso_callback_t)iso_mc_callback; + cb_mc = iso_mc_callback; break; default: @@ -990,7 +991,8 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) } context = fw_iso_context_create(client->device->card, a->type, - a->channel, a->speed, a->header_size, cb, client); + a->channel, a->speed, a->header_size, cb_sc, cb_mc, + client); if (IS_ERR(context)) return PTR_ERR(context); if (client->version < FW_CDEV_VERSION_AUTO_FLUSH_ISO_OVERFLOW) diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 185b0b78b3d6..1d28a98c08b2 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -131,7 +131,8 @@ size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed) struct fw_iso_context *fw_iso_context_create(struct fw_card *card, int type, int channel, int speed, size_t header_size, - fw_iso_callback_t callback, void *callback_data) + fw_iso_callback_t cb_sc, fw_iso_mc_callback_t cb_mc, + void *callback_data) { struct fw_iso_context *ctx; @@ -145,7 +146,16 @@ struct fw_iso_context *fw_iso_context_create(struct fw_card *card, ctx->channel = channel; ctx->speed = speed; ctx->header_size = header_size; - ctx->callback.sc = callback; + + if (cb_sc) { + ctx->callback.sc = cb_sc; + } else if (cb_mc) { + ctx->callback.mc = cb_mc; + } else { + ctx->callback.sc = NULL; + return ERR_PTR(-EINVAL); + } + ctx->callback_data = callback_data; return ctx; diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 715e491dfbc3..c5cc0a311aa0 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -1136,7 +1136,7 @@ static int fwnet_broadcast_start(struct fwnet_device *dev) context = fw_iso_context_create(dev->card, FW_ISO_CONTEXT_RECEIVE, IEEE1394_BROADCAST_CHANNEL, dev->card->link_speed, 8, - fwnet_receive_broadcast, dev); + fwnet_receive_broadcast, NULL, dev); if (IS_ERR(context)) { retval = PTR_ERR(context); goto failed; diff --git a/drivers/media/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c index 97144734eb05..d2940adefd8c 100644 --- a/drivers/media/firewire/firedtv-fw.c +++ b/drivers/media/firewire/firedtv-fw.c @@ -141,7 +141,8 @@ int fdtv_start_iso(struct firedtv *fdtv) ctx->context = fw_iso_context_create(device->card, FW_ISO_CONTEXT_RECEIVE, fdtv->isochannel, - device->max_speed, ISO_HEADER_SIZE, handle_iso, fdtv); + device->max_speed, ISO_HEADER_SIZE, + handle_iso, NULL, fdtv); if (IS_ERR(ctx->context)) { err = PTR_ERR(ctx->context); goto fail_free; diff --git a/include/linux/firewire.h b/include/linux/firewire.h index aec8f30ab200..3a0b5e18e140 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -452,7 +452,8 @@ struct fw_iso_context { struct fw_iso_context *fw_iso_context_create(struct fw_card *card, int type, int channel, int speed, size_t header_size, - fw_iso_callback_t callback, void *callback_data); + fw_iso_callback_t cb_sc, fw_iso_mc_callback_t cb_mc, + void *callback_data); int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels); int fw_iso_context_queue(struct fw_iso_context *ctx, struct fw_iso_packet *packet, diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index 37d38efb4c87..8629ab3e2c64 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -1093,7 +1093,7 @@ static int amdtp_stream_start(struct amdtp_stream *s, int channel, int speed, s->context = fw_iso_context_create(fw_parent_device(s->unit)->card, type, channel, speed, ctx_header_size, - ctx_cb, ctx_data); + ctx_cb, NULL, ctx_data); if (IS_ERR(s->context)) { err = PTR_ERR(s->context); if (err == -EBUSY) diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c index 6655af53b367..51cc37fca736 100644 --- a/sound/firewire/isight.c +++ b/sound/firewire/isight.c @@ -361,8 +361,8 @@ static int isight_start_streaming(struct isight *isight) isight->context = fw_iso_context_create(isight->device->card, FW_ISO_CONTEXT_RECEIVE, isight->resources.channel, - isight->device->max_speed, - 4, isight_packet, isight); + isight->device->max_speed, 4, + isight_packet, NULL, isight); if (IS_ERR(isight->context)) { err = PTR_ERR(isight->context); isight->context = NULL; -- 2.20.1

4 5

[PATCH 1/6] ASoC: max9867: fix ADC level control
by Pavel Dobias 22 May '20

22 May '20

Fix swapped channels in ADC level control. Signed-off-by: Pavel Dobias <dobias(a)2n.cz> --- sound/soc/codecs/max9867.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/max9867.c b/sound/soc/codecs/max9867.c index 2e4aa23b5a60..6d49a1cc98c6 100644 --- a/sound/soc/codecs/max9867.c +++ b/sound/soc/codecs/max9867.c @@ -58,7 +58,7 @@ static const struct snd_kcontrol_new max9867_snd_controls[] = { max9867_dac_tlv), SOC_SINGLE_TLV("Digital Boost Playback Volume", MAX9867_DACLEVEL, 4, 3, 0, max9867_dacboost_tlv), - SOC_DOUBLE_TLV("Digital Capture Volume", MAX9867_ADCLEVEL, 0, 4, 15, 1, + SOC_DOUBLE_TLV("Digital Capture Volume", MAX9867_ADCLEVEL, 4, 0, 15, 1, max9867_adc_tlv), SOC_ENUM("Speaker Mode", max9867_spkmode), SOC_SINGLE("Volume Smoothing Switch", MAX9867_MODECONFIG, 6, 1, 0), -- 2.20.1

2 11

[PATCH v3 1/3] ARM: pxa: remove Compulab pxa2xx boards
by Robert Jarzmik 22 May '20

22 May '20

As these boards have no more users nor testers, and patching them has become a burden, be that because of the PCI part or the MTD NAND support, let's remove them. The cm-x300 will for now remain and represent Compulab boards at its best in the PXA department. Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> Acked-by: Mike Rapoport <rppt(a)kernel.org> Acked-by: Arnd Bergmann <arnd(a)arndb.de> --- Since v1: Arnd's comments Since v2: Acks --- arch/arm/configs/cm_x2xx_defconfig | 173 ---- arch/arm/configs/em_x270_defconfig | 178 ---- arch/arm/configs/pxa_defconfig | 2 - arch/arm/mach-pxa/Kconfig | 17 - arch/arm/mach-pxa/Makefile | 5 - arch/arm/mach-pxa/cm-x255.c | 240 ----- arch/arm/mach-pxa/cm-x270.c | 419 --------- arch/arm/mach-pxa/cm-x2xx-pci.c | 196 ---- arch/arm/mach-pxa/cm-x2xx-pci.h | 14 - arch/arm/mach-pxa/cm-x2xx.c | 538 ----------- arch/arm/mach-pxa/em-x270.c | 1286 --------------------------- arch/arm/mach-pxa/include/mach/io.h | 18 - 12 files changed, 3086 deletions(-) delete mode 100644 arch/arm/configs/cm_x2xx_defconfig delete mode 100644 arch/arm/configs/em_x270_defconfig delete mode 100644 arch/arm/mach-pxa/cm-x255.c delete mode 100644 arch/arm/mach-pxa/cm-x270.c delete mode 100644 arch/arm/mach-pxa/cm-x2xx-pci.c delete mode 100644 arch/arm/mach-pxa/cm-x2xx-pci.h delete mode 100644 arch/arm/mach-pxa/cm-x2xx.c delete mode 100644 arch/arm/mach-pxa/em-x270.c delete mode 100644 arch/arm/mach-pxa/include/mach/io.h diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig deleted file mode 100644 index fa997ae2673e..000000000000 --- a/arch/arm/configs/cm_x2xx_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_ARMCORE=y -CONFIG_PCI=y -CONFIG_PCCARD=m -CONFIG_YENTA=m -# CONFIG_YENTA_O2 is not set -# CONFIG_YENTA_RICOH is not set -# CONFIG_YENTA_ENE_TUNE is not set -# CONFIG_YENTA_TOSHIBA is not set -CONFIG_PCMCIA_PXA2XX=m -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_CM_X270=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=m -# CONFIG_SATA_PMP is not set -CONFIG_PATA_PCMCIA=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_NET_PCI=y -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_PXA27x=m -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_UCB1400=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=m -# CONFIG_HWMON is not set -CONFIG_UCB1400_CORE=m -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -# CONFIG_LCD_CLASS_DEVICE is not set -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -CONFIG_SND_PXA2XX_AC97=m -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig deleted file mode 100644 index d08f02014755..000000000000 --- a/arch/arm/configs/em_x270_defconfig +++ /dev/null @@ -1,178 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_EM_X270=y -CONFIG_MACH_EXEDA=y -CONFIG_NO_HZ=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_BNEP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HCIBTUSB=m -CONFIG_LIB80211=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PXA2XX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_DEBUGLEVEL=1 -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_APMPOWER=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_PXA27x=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_DA9034 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -# CONFIG_TOUCHSCREEN_WM9705 is not set -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=y -CONFIG_POWER_SUPPLY=y -CONFIG_BATTERY_DA9030=y -# CONFIG_HWMON is not set -CONFIG_PMIC_DA903X=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DA903X=y -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_PARAMETERS=y -CONFIG_FB_MBX=m -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_TDO24M=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_DA903X=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_EM_X270=m -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=m -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_DA903X=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_V3020=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=m -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_FRAME_WARN=0 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index b817c57f05f1..e6559e3350e6 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -38,8 +38,6 @@ CONFIG_MACH_ARCOM_ZEUS=y CONFIG_MACH_BALLOON3=y CONFIG_MACH_CSB726=y CONFIG_CSB726_CSB701=y -CONFIG_MACH_ARMCORE=y -CONFIG_MACH_EM_X270=y CONFIG_MACH_EXEDA=y CONFIG_MACH_CM_X300=y CONFIG_MACH_CAPC7117=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f60bc29aef68..f7520a6cc7d4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -123,23 +123,6 @@ config CSB726_CSB701 bool "Enable support for CSB701 baseboard" depends on MACH_CSB726 -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select IWMMXT - select HAVE_PCI - select NEED_MACH_IO_H if PCI - select PXA25x - select PXA27x - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_EXEDA - bool "CompuLab eXeda platform" - select PXA27x - config MACH_CM_X300 bool "CompuLab CM-X300 modules" select CPU_PXA300 diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f70728930c4f..177abe584dd5 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -40,11 +40,6 @@ obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o -ifeq ($(CONFIG_PCI),y) -obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o -endif -obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c deleted file mode 100644 index ea1e85775759..000000000000 --- a/arch/arm/mach-pxa/cm-x255.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x255.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport <mike(a)compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand-gpio.h> -#include <linux/gpio/machine.h> -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include "pxa25x.h" - -#include "generic.h" - -#define GPIO_NAND_CS (5) -#define GPIO_NAND_ALE (4) -#define GPIO_NAND_CLE (3) -#define GPIO_NAND_RB (10) - -static unsigned long cmx255_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* SSP1 */ - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* SSP2 */ - GPIO81_SSP2_CLK_OUT, - GPIO82_SSP2_FRM_OUT, - GPIO83_SSP2_TXD, - GPIO84_SSP2_RXD, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO52_nPCE_1, - GPIO53_nPCE_2, - GPIO54_nPSKTSEL, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO33_nCS_5, - GPIO18_RDY, - - /* GPIO */ - GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, - GPIO9_GPIO, /* PC card reset */ - - /* NAND controls */ - GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */ - GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */ - GPIO10_GPIO, /* NAND Ready/Busy */ - - /* interrupts */ - GPIO22_GPIO, /* DM9000 interrupt */ -}; - -#if defined(CONFIG_SPI_PXA2XX) -static struct pxa2xx_spi_controller pxa_ssp_master_info = { - .num_chipselect = 1, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - [0] = { - .modalias = "rtc-max6902", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static void __init cmx255_init_rtc(void) -{ - pxa2xx_set_spi_info(1, &pxa_ssp_master_info); - spi_register_board_info(ARRAY_AND_SIZE(spi_board_info)); -} -#else -static inline void cmx255_init_rtc(void) {} -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition cmx255_nor_partitions[] = { - { - .name = "ARMmon", - .size = 0x00030000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "ARMmon setup block", - .size = 0x00010000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } , { - .name = "kernel", - .size = 0x00160000, - .offset = MTDPART_OFS_APPEND, - } , { - .name = "ramdisk", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -static struct physmap_flash_data cmx255_nor_flash_data[] = { - { - .width = 2, /* bankwidth in bytes */ - .parts = cmx255_nor_partitions, - .nr_parts = ARRAY_SIZE(cmx255_nor_partitions) - } -}; - -static struct resource cmx255_nor_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cmx255_nor = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = cmx255_nor_flash_data, - }, - .resource = &cmx255_nor_resource, - .num_resources = 1, -}; - -static void __init cmx255_init_nor(void) -{ - platform_device_register(&cmx255_nor); -} -#else -static inline void cmx255_init_nor(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) - -static struct gpiod_lookup_table cmx255_nand_gpiod_table = { - .dev_id = "gpio-nand", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH), - }, -}; - -static struct resource cmx255_nand_resource[] = { - [0] = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + 11, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_CS5_PHYS, - .end = PXA_CS5_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct mtd_partition cmx255_nand_parts[] = { - [0] = { - .name = "cmx255-nand", - .size = MTDPART_SIZ_FULL, - .offset = 0, - }, -}; - -static struct gpio_nand_platdata cmx255_nand_platdata = { - .parts = cmx255_nand_parts, - .num_parts = ARRAY_SIZE(cmx255_nand_parts), - .chip_delay = 25, -}; - -static struct platform_device cmx255_nand = { - .name = "gpio-nand", - .num_resources = ARRAY_SIZE(cmx255_nand_resource), - .resource = cmx255_nand_resource, - .id = -1, - .dev = { - .platform_data = &cmx255_nand_platdata, - } -}; - -static void __init cmx255_init_nand(void) -{ - gpiod_add_lookup_table(&cmx255_nand_gpiod_table); - platform_device_register(&cmx255_nand); -} -#else -static inline void cmx255_init_nand(void) {} -#endif - -void __init cmx255_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config)); - - cmx255_init_rtc(); - cmx255_init_nor(); - cmx255_init_nand(); -} diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c deleted file mode 100644 index 9baad11314f2..000000000000 --- a/arch/arm/mach-pxa/cm-x270.c +++ /dev/null @@ -1,419 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x270.c - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Mike Rapoport <mike(a)compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/delay.h> - -#include <linux/platform_data/rtc-v3020.h> -#include <video/mbxfb.h> - -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/spi/libertas_spi.h> - -#include "pxa27x.h" -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/mmc-pxamci.h> - -#include "generic.h" - -/* physical address if local-bus attached devices */ -#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) - -/* GPIO IRQ usage */ -#define GPIO83_MMC_IRQ (83) - -#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ) - -/* MMC power enable */ -#define GPIO105_MMC_POWER (105) - -/* WLAN GPIOS */ -#define GPIO19_WLAN_STRAP (19) -#define GPIO102_WLAN_RST (102) - -static unsigned long cmx270_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO98_AC97_SYSCLK, - GPIO113_AC97_nRESET, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* MCI controller */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* SSP1 */ - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* SSP2 */ - GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ - GPIO14_GPIO, - GPIO87_SSP2_TXD, - GPIO88_SSP2_RXD, - - /* PC Card */ - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO33_nCS_5, - GPIO49_nPWE, - GPIO18_RDY, - - /* GPIO */ - GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, - GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */ - GPIO53_GPIO, /* PC card reset */ - GPIO102_GPIO, /* WLAN reset */ - - /* NAND controls */ - GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO89_GPIO, /* NAND Ready/Busy */ - - /* interrupts */ - GPIO10_GPIO, /* DM9000 interrupt */ - GPIO83_GPIO, /* MMC card detect */ - GPIO95_GPIO, /* WLAN interrupt */ -}; - -/* V3020 RTC */ -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -static struct resource cmx270_v3020_resource[] = { - [0] = { - .start = RTC_PHYS_BASE, - .end = RTC_PHYS_BASE + 4, - .flags = IORESOURCE_MEM, - }, -}; - -struct v3020_platform_data cmx270_v3020_pdata = { - .leftshift = 16, -}; - -static struct platform_device cmx270_rtc_device = { - .name = "v3020", - .num_resources = ARRAY_SIZE(cmx270_v3020_resource), - .resource = cmx270_v3020_resource, - .id = -1, - .dev = { - .platform_data = &cmx270_v3020_pdata, - } -}; - -static void __init cmx270_init_rtc(void) -{ - platform_device_register(&cmx270_rtc_device); -} -#else -static inline void cmx270_init_rtc(void) {} -#endif - -/* 2700G graphics */ -#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE) -static u64 fb_dma_mask = ~(u64)0; - -static struct resource cmx270_2700G_resource[] = { - /* frame buffer memory including ODFB and External SDRAM */ - [0] = { - .start = PXA_CS2_PHYS, - .end = PXA_CS2_PHYS + 0x01ffffff, - .flags = IORESOURCE_MEM, - }, - /* Marathon registers */ - [1] = { - .start = PXA_CS2_PHYS + 0x03fe0000, - .end = PXA_CS2_PHYS + 0x03ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static unsigned long cmx270_marathon_on[] = { - GPIO58_GPIO, - GPIO59_GPIO, - GPIO60_GPIO, - GPIO61_GPIO, - GPIO62_GPIO, - GPIO63_GPIO, - GPIO64_GPIO, - GPIO65_GPIO, - GPIO66_GPIO, - GPIO67_GPIO, - GPIO68_GPIO, - GPIO69_GPIO, - GPIO70_GPIO, - GPIO71_GPIO, - GPIO72_GPIO, - GPIO73_GPIO, - GPIO74_GPIO, - GPIO75_GPIO, - GPIO76_GPIO, - GPIO77_GPIO, -}; - -static unsigned long cmx270_marathon_off[] = { - GPIOxx_LCD_TFT_16BPP, -}; - -static int cmx270_marathon_probe(struct fb_info *fb) -{ - int gpio, err; - - for (gpio = 58; gpio <= 77; gpio++) { - err = gpio_request(gpio, "LCD"); - if (err) - return err; - gpio_direction_input(gpio); - } - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on)); - return 0; -} - -static int cmx270_marathon_remove(struct fb_info *fb) -{ - int gpio; - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off)); - - for (gpio = 58; gpio <= 77; gpio++) - gpio_free(gpio); - - return 0; -} - -static struct mbxfb_platform_data cmx270_2700G_data = { - .xres = { - .min = 240, - .max = 1200, - .defval = 640, - }, - .yres = { - .min = 240, - .max = 1200, - .defval = 480, - }, - .bpp = { - .min = 16, - .max = 32, - .defval = 16, - }, - .memsize = 8*1024*1024, - .probe = cmx270_marathon_probe, - .remove = cmx270_marathon_remove, -}; - -static struct platform_device cmx270_2700G = { - .name = "mbx-fb", - .dev = { - .platform_data = &cmx270_2700G_data, - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(cmx270_2700G_resource), - .resource = cmx270_2700G_resource, - .id = -1, -}; - -static void __init cmx270_init_2700G(void) -{ - platform_device_register(&cmx270_2700G); -} -#else -static inline void cmx270_init_2700G(void) {} -#endif - -/* PXA27x OHCI controller setup */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static struct pxaohci_platform_data cmx270_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, -}; - -static void __init cmx270_init_ohci(void) -{ - pxa_set_ohci_info(&cmx270_ohci_platform_data); -} -#else -static inline void cmx270_init_ohci(void) {} -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -static struct pxamci_platform_data cmx270_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -static struct gpiod_lookup_table cmx270_mci_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - /* Card detect on GPIO 83 */ - GPIO_LOOKUP("gpio-pxa", GPIO83_MMC_IRQ, "cd", GPIO_ACTIVE_LOW), - /* Power on GPIO 105 */ - GPIO_LOOKUP("gpio-pxa", GPIO105_MMC_POWER, - "power", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init cmx270_init_mmc(void) -{ - gpiod_add_lookup_table(&cmx270_mci_gpio_table); - pxa_set_mci_info(&cmx270_mci_platform_data); -} -#else -static inline void cmx270_init_mmc(void) {} -#endif - -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_controller cm_x270_spi_info = { - .num_chipselect = 1, - .enable_dma = 1, -}; - -static struct pxa2xx_spi_chip cm_x270_libertas_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .timeout = 1000, - .gpio_cs = 14, -}; - -static unsigned long cm_x270_libertas_pin_config[] = { - /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_GPIO, - GPIO87_SSP2_TXD, - GPIO88_SSP2_RXD, - -}; - -static int cm_x270_libertas_setup(struct spi_device *spi) -{ - int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); - if (err) - return err; - - err = gpio_request(GPIO102_WLAN_RST, "WLAN RST"); - if (err) - goto err_free_strap; - - err = gpio_direction_output(GPIO102_WLAN_RST, 0); - if (err) - goto err_free_strap; - msleep(100); - - err = gpio_direction_output(GPIO19_WLAN_STRAP, 1); - if (err) - goto err_free_strap; - msleep(100); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config)); - - gpio_set_value(GPIO102_WLAN_RST, 1); - msleep(100); - - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -err_free_strap: - gpio_free(GPIO19_WLAN_STRAP); - - return err; -} - -static int cm_x270_libertas_teardown(struct spi_device *spi) -{ - gpio_set_value(GPIO102_WLAN_RST, 0); - gpio_free(GPIO102_WLAN_RST); - gpio_free(GPIO19_WLAN_STRAP); - - return 0; -} - -struct libertas_spi_platform_data cm_x270_libertas_pdata = { - .use_dummy_writes = 1, - .setup = cm_x270_libertas_setup, - .teardown = cm_x270_libertas_teardown, -}; - -static struct spi_board_info cm_x270_spi_devices[] __initdata = { - { - .modalias = "libertas_spi", - .max_speed_hz = 13000000, - .bus_num = 2, - .irq = PXA_GPIO_TO_IRQ(95), - .chip_select = 0, - .controller_data = &cm_x270_libertas_chip, - .platform_data = &cm_x270_libertas_pdata, - }, -}; - -static void __init cmx270_init_spi(void) -{ - pxa2xx_set_spi_info(2, &cm_x270_spi_info); - spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices)); -} -#else -static inline void cmx270_init_spi(void) {} -#endif - -void __init cmx270_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); - -#ifdef CONFIG_PM - pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); -#endif - - cmx270_init_rtc(); - cmx270_init_mmc(); - cmx270_init_ohci(); - cmx270_init_2700G(); - cmx270_init_spi(); -} diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c deleted file mode 100644 index f1c61c6b5610..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x2xx-pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - * - * Copyright (C) 2007, 2008 Compulab, Ltd. - * Mike Rapoport <mike(a)compulab.co.il> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -#include <asm/hardware/it8152.h> - -void __iomem *it8152_base_address; -static int cmx2xx_it8152_irq_gpio; - -static void cmx2xx_it8152_irq_demux(struct irq_desc *desc) -{ - /* clear our parent irq */ - desc->irq_data.chip->irq_ack(&desc->irq_data); - - it8152_irq_demux(desc); -} - -void __cmx2xx_pci_init_irq(int irq_gpio) -{ - it8152_init_irq(); - - cmx2xx_it8152_irq_gpio = irq_gpio; - - irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - - irq_set_chained_handler(gpio_to_irq(irq_gpio), - cmx2xx_it8152_irq_demux); -} - -#ifdef CONFIG_PM -static unsigned long sleep_save_ite[10]; - -void __cmx2xx_pci_suspend(void) -{ - /* save ITE state */ - sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); - sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); - sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); - - /* Clear ITE IRQ's */ - __raw_writel((0), IT8152_INTC_PDCNIRR); - __raw_writel((0), IT8152_INTC_LPCNIRR); -} - -void __cmx2xx_pci_resume(void) -{ - /* restore IT8152 state */ - __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); - __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); - __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); -} -#else -void cmx2xx_pci_suspend(void) {} -void cmx2xx_pci_resume(void) {} -#endif - -/* PCI IRQ mapping*/ -static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); - - irq = it8152_pci_map_irq(dev, slot, pin); - if (irq) - return irq; - - /* - Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-X2XX is - unrealistic. Here we keep mapping for ATXBase and SB-X2XX. - */ - /* ATXBASE PCI slot */ - if (slot == 7) - return IT8152_PCI_INTA; - - /* ATXBase/SB-X2XX CardBus */ - if (slot == 8 || slot == 0) - return IT8152_PCI_INTB; - - /* ATXBase Ethernet */ - if (slot == 9) - return IT8152_PCI_INTA; - - /* CM-x255 Onboard Ethernet */ - if (slot == 15) - return IT8152_PCI_INTC; - - /* SB-x2xx Ethernet */ - if (slot == 16) - return IT8152_PCI_INTA; - - /* PC104+ interrupt routing */ - if ((slot == 17) || (slot == 19)) - return IT8152_PCI_INTA; - if ((slot == 18) || (slot == 20)) - return IT8152_PCI_INTB; - - return(0); -} - -static void cmx2xx_pci_preinit(void) -{ - pr_info("Initializing CM-X2XX PCI subsystem\n"); - - pcibios_min_io = 0; - pcibios_min_mem = 0; - - __raw_writel(0x800, IT8152_PCI_CFG_ADDR); - if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { - pr_info("PCI Bridge found.\n"); - - /* set PCI I/O base at 0 */ - writel(0x848, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - /* set PCI memory base at 0 */ - writel(0x840, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - writel(0x20, IT8152_GPIO_GPDR); - - /* CardBus Controller on ATXbase baseboard */ - writel(0x4000, IT8152_PCI_CFG_ADDR); - if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { - pr_info("CardBus Bridge found.\n"); - - /* Configure socket 0 */ - writel(0x408C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4080, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4090, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4018, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - - /* Configure socket 1 */ - writel(0x418C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4180, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4190, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4118, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - } - } -} - -static struct hw_pci cmx2xx_pci __initdata = { - .map_irq = cmx2xx_pci_map_irq, - .nr_controllers = 1, - .ops = &it8152_ops, - .setup = it8152_pci_setup, - .preinit = cmx2xx_pci_preinit, -}; - -static int __init cmx2xx_init_pci(void) -{ - if (machine_is_armcore()) - pci_common_init(&cmx2xx_pci); - - return 0; -} - -subsys_initcall(cmx2xx_init_pci); diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h deleted file mode 100644 index 93ffaaee75d7..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx-pci.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -extern void __cmx2xx_pci_init_irq(int irq_gpio); -extern void __cmx2xx_pci_suspend(void); -extern void __cmx2xx_pci_resume(void); - -#ifdef CONFIG_PCI -#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x) -#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x) -#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x) -#else -#define cmx2xx_pci_init_irq(x) do {} while (0) -#define cmx2xx_pci_suspend(x) do {} while (0) -#define cmx2xx_pci_resume(x) do {} while (0) -#endif diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c deleted file mode 100644 index ff976d1217eb..000000000000 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ /dev/null @@ -1,538 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/cm-x2xx.c - * - * Copyright (C) 2008 CompuLab, Ltd. - * Mike Rapoport <mike(a)compulab.co.il> - */ - -#include <linux/platform_device.h> -#include <linux/syscore_ops.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/regulator/machine.h> - -#include <linux/dm9000.h> -#include <linux/leds.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> - -#include "pxa25x.h" -#undef GPIO24_SSP1_SFRM -#undef GPIO86_GPIO -#undef GPIO87_GPIO -#undef GPIO88_GPIO -#undef GPIO89_GPIO -#include "pxa27x.h" -#undef GPIO24_SSP1_SFRM -#undef GPIO86_GPIO -#undef GPIO87_GPIO -#undef GPIO88_GPIO -#undef GPIO89_GPIO -#include <mach/audio.h> -#include <linux/platform_data/video-pxafb.h> -#include <mach/smemc.h> - -#include <asm/hardware/it8152.h> - -#include "generic.h" -#include "cm-x2xx-pci.h" - -extern void cmx255_init(void); -extern void cmx270_init(void); - -/* reserve IRQs for IT8152 */ -#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) - -/* virtual addresses for statically mapped regions */ -#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000) -#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) - -/* physical address if local-bus attached devices */ -#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22)) -#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) - -/* leds */ -#define CMX255_GPIO_RED (27) -#define CMX255_GPIO_GREEN (32) -#define CMX270_GPIO_RED (93) -#define CMX270_GPIO_GREEN (94) - -/* GPIO IRQ usage */ -#define GPIO22_ETHIRQ (22) -#define GPIO10_ETHIRQ (10) -#define CMX255_GPIO_IT8152_IRQ (0) -#define CMX270_GPIO_IT8152_IRQ (22) - -#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ) -#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ) - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource cmx255_dm9000_resource[] = { - [0] = { - .start = CMX255_DM9000_PHYS_BASE, - .end = CMX255_DM9000_PHYS_BASE + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CMX255_DM9000_PHYS_BASE + 4, - .end = CMX255_DM9000_PHYS_BASE + 4 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = CMX255_ETHIRQ, - .end = CMX255_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct resource cmx270_dm9000_resource[] = { - [0] = { - .start = CMX270_DM9000_PHYS_BASE, - .end = CMX270_DM9000_PHYS_BASE + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CMX270_DM9000_PHYS_BASE + 8, - .end = CMX270_DM9000_PHYS_BASE + 8 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = CMX270_ETHIRQ, - .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data cmx270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device cmx2xx_dm9000_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(cmx270_dm9000_resource), - .dev = { - .platform_data = &cmx270_dm9000_platdata, - } -}; - -static void __init cmx2xx_init_dm9000(void) -{ - if (cpu_is_pxa25x()) - cmx2xx_dm9000_device.resource = cmx255_dm9000_resource; - else - cmx2xx_dm9000_device.resource = cmx270_dm9000_resource; - platform_device_register(&cmx2xx_dm9000_device); -} -#else -static inline void cmx2xx_init_dm9000(void) {} -#endif - -/* UCB1400 touchscreen controller */ -#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) -static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_core", - .id = -1, -}; - -static void __init cmx2xx_init_touchscreen(void) -{ - platform_device_register(&cmx2xx_ts_device); -} -#else -static inline void cmx2xx_init_touchscreen(void) {} -#endif - -/* CM-X270 LEDs */ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led cmx2xx_leds[] = { - [0] = { - .name = "cm-x2xx:red", - .default_trigger = "nand-disk", - .active_low = 1, - }, - [1] = { - .name = "cm-x2xx:green", - .default_trigger = "heartbeat", - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = { - .num_leds = ARRAY_SIZE(cmx2xx_leds), - .leds = cmx2xx_leds, -}; - -static struct platform_device cmx2xx_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cmx2xx_gpio_led_pdata, - }, -}; - -static void __init cmx2xx_init_leds(void) -{ - if (cpu_is_pxa25x()) { - cmx2xx_leds[0].gpio = CMX255_GPIO_RED; - cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN; - } else { - cmx2xx_leds[0].gpio = CMX270_GPIO_RED; - cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN; - } - platform_device_register(&cmx2xx_led_device); -} -#else -static inline void cmx2xx_init_leds(void) {} -#endif - -#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -/* - Display definitions - keep these for backwards compatibility, although symbolic names (as - e.g. in lpd270.c) looks better -*/ -#define MTYPE_STN320x240 0 -#define MTYPE_TFT640x480 1 -#define MTYPE_CRT640x480 2 -#define MTYPE_CRT800x600 3 -#define MTYPE_TFT320x240 6 -#define MTYPE_STN640x480 7 - -static struct pxafb_mode_info generic_stn_320x240_mode = { - .pixclock = 76923, - .bpp = 8, - .xres = 320, - .yres = 240, - .hsync_len = 3, - .vsync_len = 2, - .left_margin = 3, - .upper_margin = 0, - .right_margin = 3, - .lower_margin = 0, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_320x240 = { - .modes = &generic_stn_320x240_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\ - LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 60, - .vsync_len = 2, - .left_margin = 70, - .upper_margin = 10, - .right_margin = 70, - .lower_margin = 5, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_640x480 = { - .modes = &generic_tft_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\ - LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_640x480_mode = { - .pixclock = 38461, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 81, - .upper_margin = 33, - .right_margin = 16, - .lower_margin = 10, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_640x480 = { - .modes = &generic_crt_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_crt_800x600_mode = { - .pixclock = 28846, - .bpp = 8, - .xres = 800, - .yres = 600, - .hsync_len = 63, - .vsync_len = 2, - .left_margin = 26, - .upper_margin = 21, - .right_margin = 26, - .lower_margin = 11, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_crt_800x600 = { - .modes = &generic_crt_800x600_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_tft_320x240_mode = { - .pixclock = 134615, - .bpp = 16, - .xres = 320, - .yres = 240, - .hsync_len = 63, - .vsync_len = 7, - .left_margin = 75, - .upper_margin = 0, - .right_margin = 15, - .lower_margin = 15, - .sync = 0, - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_tft_320x240 = { - .modes = &generic_tft_320x240_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mode_info generic_stn_640x480_mode = { - .pixclock = 57692, - .bpp = 8, - .xres = 640, - .yres = 480, - .hsync_len = 4, - .vsync_len = 2, - .left_margin = 10, - .upper_margin = 5, - .right_margin = 10, - .lower_margin = 5, - .sync = (FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT), - .cmap_greyscale = 0, -}; - -static struct pxafb_mach_info generic_stn_640x480 = { - .modes = &generic_stn_640x480_mode, - .num_modes = 1, - .lcd_conn = LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff), - .cmap_inverse = 0, - .cmap_static = 0, -}; - -static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480; - -static int __init cmx2xx_set_display(char *str) -{ - int disp_type = simple_strtol(str, NULL, 0); - switch (disp_type) { - case MTYPE_STN320x240: - cmx2xx_display = &generic_stn_320x240; - break; - case MTYPE_TFT640x480: - cmx2xx_display = &generic_tft_640x480; - break; - case MTYPE_CRT640x480: - cmx2xx_display = &generic_crt_640x480; - break; - case MTYPE_CRT800x600: - cmx2xx_display = &generic_crt_800x600; - break; - case MTYPE_TFT320x240: - cmx2xx_display = &generic_tft_320x240; - break; - case MTYPE_STN640x480: - cmx2xx_display = &generic_stn_640x480; - break; - default: /* fallback to CRT 640x480 */ - cmx2xx_display = &generic_crt_640x480; - break; - } - return 1; -} - -/* - This should be done really early to get proper configuration for - frame buffer. - Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader - has limitied line length for kernel command line, and also it will - break compatibitlty with proprietary releases already in field. -*/ -__setup("monitor=", cmx2xx_set_display); - -static void __init cmx2xx_init_display(void) -{ - pxa_set_fb_info(NULL, cmx2xx_display); -} -#else -static inline void cmx2xx_init_display(void) {} -#endif - -#ifdef CONFIG_PM -static unsigned long sleep_save_msc[10]; - -static int cmx2xx_suspend(void) -{ - cmx2xx_pci_suspend(); - - /* save MSC registers */ - sleep_save_msc[0] = __raw_readl(MSC0); - sleep_save_msc[1] = __raw_readl(MSC1); - sleep_save_msc[2] = __raw_readl(MSC2); - - /* setup power saving mode registers */ - PCFR = 0x0; - PSLR = 0xff400000; - PMCR = 0x00000005; - PWER = 0x80000000; - PFER = 0x00000000; - PRER = 0x00000000; - PGSR0 = 0xC0018800; - PGSR1 = 0x004F0002; - PGSR2 = 0x6021C000; - PGSR3 = 0x00020000; - - return 0; -} - -static void cmx2xx_resume(void) -{ - cmx2xx_pci_resume(); - - /* restore MSC registers */ - __raw_writel(sleep_save_msc[0], MSC0); - __raw_writel(sleep_save_msc[1], MSC1); - __raw_writel(sleep_save_msc[2], MSC2); -} - -static struct syscore_ops cmx2xx_pm_syscore_ops = { - .resume = cmx2xx_resume, - .suspend = cmx2xx_suspend, -}; - -static int __init cmx2xx_pm_init(void) -{ - register_syscore_ops(&cmx2xx_pm_syscore_ops); - - return 0; -} -#else -static int __init cmx2xx_pm_init(void) { return 0; } -#endif - -#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) -static void __init cmx2xx_init_ac97(void) -{ - pxa_set_ac97_info(NULL); -} -#else -static inline void cmx2xx_init_ac97(void) {} -#endif - -static void __init cmx2xx_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - - cmx2xx_pm_init(); - - if (cpu_is_pxa25x()) - cmx255_init(); - else - cmx270_init(); - - cmx2xx_init_dm9000(); - cmx2xx_init_display(); - cmx2xx_init_ac97(); - cmx2xx_init_touchscreen(); - cmx2xx_init_leds(); - - regulator_has_full_constraints(); -} - -static void __init cmx2xx_init_irq(void) -{ - if (cpu_is_pxa25x()) { - pxa25x_init_irq(); - cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); - } else { - pxa27x_init_irq(); - cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ); - } -} - -#ifdef CONFIG_PCI -/* Map PCI companion statically */ -static struct map_desc cmx2xx_io_desc[] __initdata = { - [0] = { /* PCI bridge */ - .virtual = (unsigned long)CMX2XX_IT8152_VIRT, - .pfn = __phys_to_pfn(PXA_CS4_PHYS), - .length = SZ_64M, - .type = MT_DEVICE - }, -}; - -static void __init cmx2xx_map_io(void) -{ - if (cpu_is_pxa25x()) - pxa25x_map_io(); - - if (cpu_is_pxa27x()) - pxa27x_map_io(); - - iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc)); - - it8152_base_address = CMX2XX_IT8152_VIRT; -} -#else -static void __init cmx2xx_map_io(void) -{ - if (cpu_is_pxa25x()) - pxa25x_map_io(); - - if (cpu_is_pxa27x()) - pxa27x_map_io(); -} -#endif - -MACHINE_START(ARMCORE, "Compulab CM-X2XX") - .atag_offset = 0x100, - .map_io = cmx2xx_map_io, - .nr_irqs = CMX2XX_NR_IRQS, - .init_irq = cmx2xx_init_irq, - /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ - .handle_irq = pxa25x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = cmx2xx_init, -#ifdef CONFIG_PCI - .dma_zone_size = SZ_64M, -#endif - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c deleted file mode 100644 index d8681a331030..000000000000 --- a/arch/arm/mach-pxa/em-x270.c +++ /dev/null @@ -1,1286 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Support for CompuLab EM-X270 platform - * - * Copyright (C) 2007, 2008 CompuLab, Ltd. - * Author: Mike Rapoport <mike(a)compulab.co.il> - */ - -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <linux/dm9000.h> -#include <linux/platform_data/rtc-v3020.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/mfd/da903x.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> -#include <linux/spi/tdo24m.h> -#include <linux/spi/libertas_spi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/power_supply.h> -#include <linux/apm-emulation.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/platform_data/i2c-pxa.h> -#include <linux/regulator/userspace-consumer.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "pxa27x.h" -#include "pxa27x-udc.h" -#include <mach/audio.h> -#include <linux/platform_data/video-pxafb.h> -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/mmc-pxamci.h> -#include <linux/platform_data/keypad-pxa27x.h> -#include <linux/platform_data/media/camera-pxa.h> - -#include "generic.h" -#include "devices.h" - -/* EM-X270 specific GPIOs */ -#define GPIO13_MMC_CD (13) -#define GPIO95_MMC_WP (95) -#define GPIO56_NAND_RB (56) -#define GPIO93_CAM_RESET (93) -#define GPIO16_USB_HUB_RESET (16) - -/* eXeda specific GPIOs */ -#define GPIO114_MMC_CD (114) -#define GPIO20_NAND_RB (20) -#define GPIO38_SD_PWEN (38) -#define GPIO37_WLAN_RST (37) -#define GPIO95_TOUCHPAD_INT (95) -#define GPIO130_CAM_RESET (130) -#define GPIO10_USB_HUB_RESET (10) - -/* common GPIOs */ -#define GPIO11_NAND_CS (11) -#define GPIO41_ETHIRQ (41) -#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ) -#define GPIO115_WLAN_PWEN (115) -#define GPIO19_WLAN_STRAP (19) -#define GPIO9_USB_VBUS_EN (9) - -static int mmc_cd; -static int nand_rb; -static int dm9000_flags; -static int cam_reset; -static int usb_hub_reset; - -static unsigned long common_pin_config[] = { - /* AC'97 */ - GPIO28_AC97_BITCLK, - GPIO29_AC97_SDATA_IN_0, - GPIO30_AC97_SDATA_OUT, - GPIO31_AC97_SYNC, - GPIO98_AC97_SYSCLK, - GPIO113_AC97_nRESET, - - /* BTUART */ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* MCI controller */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - - /* QCI */ - GPIO84_CIF_FV, - GPIO25_CIF_LV, - GPIO53_CIF_MCLK, - GPIO54_CIF_PCLK, - GPIO81_CIF_DD_0, - GPIO55_CIF_DD_1, - GPIO51_CIF_DD_2, - GPIO50_CIF_DD_3, - GPIO52_CIF_DD_4, - GPIO48_CIF_DD_5, - GPIO17_CIF_DD_6, - GPIO12_CIF_DD_7, - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* Keypad */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, - GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, - GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, - GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, - GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, - GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, - GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, - GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH, - GPIO103_KP_MKOUT_0, - GPIO104_KP_MKOUT_1, - GPIO105_KP_MKOUT_2, - GPIO106_KP_MKOUT_3, - GPIO107_KP_MKOUT_4, - GPIO108_KP_MKOUT_5, - GPIO96_KP_MKOUT_6, - GPIO22_KP_MKOUT_7, - - /* SSP1 */ - GPIO26_SSP1_RXD, - GPIO23_SSP1_SCLK, - GPIO24_SSP1_SFRM, - GPIO57_SSP1_TXD, - - /* SSP2 */ - GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ - GPIO14_GPIO, - GPIO89_SSP2_TXD, - GPIO88_SSP2_RXD, - - /* SDRAM and local bus */ - GPIO15_nCS_1, - GPIO78_nCS_2, - GPIO79_nCS_3, - GPIO80_nCS_4, - GPIO49_nPWE, - GPIO18_RDY, - - /* GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ - - /* power controls */ - GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ - GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ - - /* NAND controls */ - GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - - /* interrupts */ - GPIO41_GPIO, /* DM9000 interrupt */ -}; - -static unsigned long em_x270_pin_config[] = { - GPIO13_GPIO, /* MMC card detect */ - GPIO16_GPIO, /* USB hub reset */ - GPIO56_GPIO, /* NAND Ready/Busy */ - GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ - GPIO95_GPIO, /* MMC Write protect */ -}; - -static unsigned long exeda_pin_config[] = { - GPIO10_GPIO, /* USB hub reset */ - GPIO20_GPIO, /* NAND Ready/Busy */ - GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ - GPIO95_GPIO, /* touchpad IRQ */ - GPIO114_GPIO, /* MMC card detect */ -}; - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource em_x270_dm9000_resource[] = { - [0] = { - .start = PXA_CS2_PHYS, - .end = PXA_CS2_PHYS + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_CS2_PHYS + 8, - .end = PXA_CS2_PHYS + 8 + 0x3f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data em_x270_dm9000_platdata = { - .flags = DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device em_x270_dm9000 = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(em_x270_dm9000_resource), - .resource = em_x270_dm9000_resource, - .dev = { - .platform_data = &em_x270_dm9000_platdata, - } -}; - -static void __init em_x270_init_dm9000(void) -{ - em_x270_dm9000_platdata.flags |= dm9000_flags; - platform_device_register(&em_x270_dm9000); -} -#else -static inline void em_x270_init_dm9000(void) {} -#endif - -/* V3020 RTC */ -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -static struct resource em_x270_v3020_resource[] = { - [0] = { - .start = PXA_CS4_PHYS, - .end = PXA_CS4_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct v3020_platform_data em_x270_v3020_platdata = { - .leftshift = 0, -}; - -static struct platform_device em_x270_rtc = { - .name = "v3020", - .num_resources = ARRAY_SIZE(em_x270_v3020_resource), - .resource = em_x270_v3020_resource, - .id = -1, - .dev = { - .platform_data = &em_x270_v3020_platdata, - } -}; - -static void __init em_x270_init_rtc(void) -{ - platform_device_register(&em_x270_rtc); -} -#else -static inline void em_x270_init_rtc(void) {} -#endif - -/* NAND flash */ -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -static inline void nand_cs_on(void) -{ - gpio_set_value(GPIO11_NAND_CS, 0); -} - -static void nand_cs_off(void) -{ - dsb(); - - gpio_set_value(GPIO11_NAND_CS, 1); -} - -/* hardware specific access to control-lines */ -static void em_x270_nand_cmd_ctl(struct nand_chip *this, int dat, - unsigned int ctrl) -{ - unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W; - - dsb(); - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_ALE) - nandaddr |= (1 << 3); - else - nandaddr &= ~(1 << 3); - if (ctrl & NAND_CLE) - nandaddr |= (1 << 2); - else - nandaddr &= ~(1 << 2); - if (ctrl & NAND_NCE) - nand_cs_on(); - else - nand_cs_off(); - } - - dsb(); - this->legacy.IO_ADDR_W = (void __iomem *)nandaddr; - if (dat != NAND_CMD_NONE) - writel(dat, this->legacy.IO_ADDR_W); - - dsb(); -} - -/* read device ready pin */ -static int em_x270_nand_device_ready(struct nand_chip *this) -{ - dsb(); - - return gpio_get_value(nand_rb); -} - -static struct mtd_partition em_x270_partition_info[] = { - [0] = { - .name = "em_x270-0", - .offset = 0, - .size = SZ_4M, - }, - [1] = { - .name = "em_x270-1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - }, -}; - -struct platform_nand_data em_x270_nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(em_x270_partition_info), - .partitions = em_x270_partition_info, - .chip_delay = 20, - }, - .ctrl = { - .dev_ready = em_x270_nand_device_ready, - .select_chip = 0, - .cmd_ctrl = em_x270_nand_cmd_ctl, - }, -}; - -static struct resource em_x270_nand_resource[] = { - [0] = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + 12, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device em_x270_nand = { - .name = "gen_nand", - .num_resources = ARRAY_SIZE(em_x270_nand_resource), - .resource = em_x270_nand_resource, - .id = -1, - .dev = { - .platform_data = &em_x270_nand_platdata, - } -}; - -static void __init em_x270_init_nand(void) -{ - int err; - - err = gpio_request(GPIO11_NAND_CS, "NAND CS"); - if (err) { - pr_warn("EM-X270: failed to request NAND CS gpio\n"); - return; - } - - gpio_direction_output(GPIO11_NAND_CS, 1); - - err = gpio_request(nand_rb, "NAND R/B"); - if (err) { - pr_warn("EM-X270: failed to request NAND R/B gpio\n"); - gpio_free(GPIO11_NAND_CS); - return; - } - - gpio_direction_input(nand_rb); - - platform_device_register(&em_x270_nand); -} -#else -static inline void em_x270_init_nand(void) {} -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition em_x270_nor_parts[] = { - { - .name = "Bootloader", - .offset = 0x00000000, - .size = 0x00050000, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, { - .name = "Environment", - .offset = 0x00050000, - .size = 0x00010000, - }, { - .name = "Reserved", - .offset = 0x00060000, - .size = 0x00050000, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, { - .name = "Splashscreen", - .offset = 0x000b0000, - .size = 0x00050000, - } -}; - -static struct physmap_flash_data em_x270_nor_data[] = { - [0] = { - .width = 2, - .parts = em_x270_nor_parts, - .nr_parts = ARRAY_SIZE(em_x270_nor_parts), - }, -}; - -static struct resource em_x270_nor_flash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_1M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device em_x270_physmap_flash = { - .name = "physmap-flash", - .id = 0, - .num_resources = 1, - .resource = &em_x270_nor_flash_resource, - .dev = { - .platform_data = &em_x270_nor_data, - }, -}; - -static void __init em_x270_init_nor(void) -{ - platform_device_register(&em_x270_physmap_flash); -} -#else -static inline void em_x270_init_nor(void) {} -#endif - -/* PXA27x OHCI controller setup */ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static struct regulator *em_x270_usb_ldo; - -static int em_x270_usb_hub_init(void) -{ - int err; - - em_x270_usb_ldo = regulator_get(NULL, "vcc usb"); - if (IS_ERR(em_x270_usb_ldo)) - return PTR_ERR(em_x270_usb_ldo); - - err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en"); - if (err) - goto err_free_usb_ldo; - - err = gpio_request(usb_hub_reset, "hub rst"); - if (err) - goto err_free_vbus_gpio; - - /* USB Hub power-on and reset */ - gpio_direction_output(usb_hub_reset, 1); - gpio_direction_output(GPIO9_USB_VBUS_EN, 0); - err = regulator_enable(em_x270_usb_ldo); - if (err) - goto err_free_rst_gpio; - - gpio_set_value(usb_hub_reset, 0); - gpio_set_value(usb_hub_reset, 1); - regulator_disable(em_x270_usb_ldo); - err = regulator_enable(em_x270_usb_ldo); - if (err) - goto err_free_rst_gpio; - - gpio_set_value(usb_hub_reset, 0); - gpio_set_value(GPIO9_USB_VBUS_EN, 1); - - return 0; - -err_free_rst_gpio: - gpio_free(usb_hub_reset); -err_free_vbus_gpio: - gpio_free(GPIO9_USB_VBUS_EN); -err_free_usb_ldo: - regulator_put(em_x270_usb_ldo); - - return err; -} - -static int em_x270_ohci_init(struct device *dev) -{ - int err; - - /* we don't want to entirely disable USB if the HUB init failed */ - err = em_x270_usb_hub_init(); - if (err) - pr_err("USB Hub initialization failed: %d\n", err); - - /* enable port 2 transiever */ - UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; - - return 0; -} - -static void em_x270_ohci_exit(struct device *dev) -{ - gpio_free(usb_hub_reset); - gpio_free(GPIO9_USB_VBUS_EN); - - if (!IS_ERR(em_x270_usb_ldo)) { - if (regulator_is_enabled(em_x270_usb_ldo)) - regulator_disable(em_x270_usb_ldo); - - regulator_put(em_x270_usb_ldo); - } -} - -static struct pxaohci_platform_data em_x270_ohci_platform_data = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, - .init = em_x270_ohci_init, - .exit = em_x270_ohci_exit, -}; - -static void __init em_x270_init_ohci(void) -{ - pxa_set_ohci_info(&em_x270_ohci_platform_data); -} -#else -static inline void em_x270_init_ohci(void) {} -#endif - -/* MCI controller setup */ -#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -static struct regulator *em_x270_sdio_ldo; - -static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - /* Write protect on GPIO 95 */ - GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static int em_x270_mci_init(struct device *dev, - irq_handler_t em_x270_detect_int, - void *data) -{ - int err; - - em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); - if (IS_ERR(em_x270_sdio_ldo)) { - dev_err(dev, "can't request SDIO power supply: %ld\n", - PTR_ERR(em_x270_sdio_ldo)); - return PTR_ERR(em_x270_sdio_ldo); - } - - err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC card detect", data); - if (err) { - dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); - goto err_irq; - } - - if (!machine_is_em_x270()) { - err = gpio_request(GPIO38_SD_PWEN, "sdio power"); - if (err) { - dev_err(dev, "can't request MMC power control : %d\n", - err); - goto err_gpio_wp; - } - gpio_direction_output(GPIO38_SD_PWEN, 1); - } - - return 0; - -err_gpio_wp: - free_irq(gpio_to_irq(mmc_cd), data); -err_irq: - regulator_put(em_x270_sdio_ldo); - - return err; -} - -static int em_x270_mci_setpower(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data* p_d = dev->platform_data; - - if ((1 << vdd) & p_d->ocr_mask) { - int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; - - regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); - return regulator_enable(em_x270_sdio_ldo); - } else { - regulator_disable(em_x270_sdio_ldo); - } - return 0; -} - -static void em_x270_mci_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(mmc_cd), data); - regulator_put(em_x270_sdio_ldo); - - if (!machine_is_em_x270()) - gpio_free(GPIO38_SD_PWEN); -} - -static struct pxamci_platform_data em_x270_mci_platform_data = { - .detect_delay_ms = 250, - .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| - MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| - MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| - MMC_VDD_30_31|MMC_VDD_31_32, - .init = em_x270_mci_init, - .setpower = em_x270_mci_setpower, - .exit = em_x270_mci_exit, -}; - -static void __init em_x270_init_mmc(void) -{ - if (machine_is_em_x270()) - gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table); - - pxa_set_mci_info(&em_x270_mci_platform_data); -} -#else -static inline void em_x270_init_mmc(void) {} -#endif - -/* LCD */ -#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -static struct pxafb_mode_info em_x270_lcd_modes[] = { - [0] = { - .pixclock = 38250, - .bpp = 16, - .xres = 480, - .yres = 640, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 2, - .right_margin = 24, - .lower_margin = 4, - .sync = 0, - }, - [1] = { - .pixclock = 153800, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 2, - .right_margin = 88, - .lower_margin = 2, - .sync = 0, - }, -}; - -static struct pxafb_mach_info em_x270_lcd = { - .modes = em_x270_lcd_modes, - .num_modes = 2, - .lcd_conn = LCD_COLOR_TFT_16BPP, -}; - -static void __init em_x270_init_lcd(void) -{ - pxa_set_fb_info(NULL, &em_x270_lcd); -} -#else -static inline void em_x270_init_lcd(void) {} -#endif - -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_controller em_x270_spi_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .gpio_cs = -1, -}; - -static struct tdo24m_platform_data em_x270_tdo24m_pdata = { - .model = TDO35S, -}; - -static struct pxa2xx_spi_controller em_x270_spi_2_info = { - .num_chipselect = 1, - .enable_dma = 1, -}; - -static struct pxa2xx_spi_chip em_x270_libertas_chip = { - .rx_threshold = 1, - .tx_threshold = 1, - .timeout = 1000, - .gpio_cs = 14, -}; - -static unsigned long em_x270_libertas_pin_config[] = { - /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_GPIO, - GPIO89_SSP2_TXD, - GPIO88_SSP2_RXD, -}; - -static int em_x270_libertas_setup(struct spi_device *spi) -{ - int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); - if (err) - return err; - - err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP"); - if (err) - goto err_free_pwen; - - if (machine_is_exeda()) { - err = gpio_request(GPIO37_WLAN_RST, "WLAN RST"); - if (err) - goto err_free_strap; - - gpio_direction_output(GPIO37_WLAN_RST, 1); - msleep(100); - } - - gpio_direction_output(GPIO19_WLAN_STRAP, 1); - msleep(100); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); - - gpio_direction_output(GPIO115_WLAN_PWEN, 0); - msleep(100); - gpio_set_value(GPIO115_WLAN_PWEN, 1); - msleep(100); - - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -err_free_strap: - gpio_free(GPIO19_WLAN_STRAP); -err_free_pwen: - gpio_free(GPIO115_WLAN_PWEN); - - return err; -} - -static int em_x270_libertas_teardown(struct spi_device *spi) -{ - gpio_set_value(GPIO115_WLAN_PWEN, 0); - gpio_free(GPIO115_WLAN_PWEN); - gpio_free(GPIO19_WLAN_STRAP); - - if (machine_is_exeda()) { - gpio_set_value(GPIO37_WLAN_RST, 0); - gpio_free(GPIO37_WLAN_RST); - } - - return 0; -} - -struct libertas_spi_platform_data em_x270_libertas_pdata = { - .use_dummy_writes = 1, - .setup = em_x270_libertas_setup, - .teardown = em_x270_libertas_teardown, -}; - -static struct spi_board_info em_x270_spi_devices[] __initdata = { - { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, - }, - { - .modalias = "libertas_spi", - .max_speed_hz = 13000000, - .bus_num = 2, - .irq = PXA_GPIO_TO_IRQ(116), - .chip_select = 0, - .controller_data = &em_x270_libertas_chip, - .platform_data = &em_x270_libertas_pdata, - }, -}; - -static void __init em_x270_init_spi(void) -{ - pxa2xx_set_spi_info(1, &em_x270_spi_info); - pxa2xx_set_spi_info(2, &em_x270_spi_2_info); - spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); -} -#else -static inline void em_x270_init_spi(void) {} -#endif - -#if defined(CONFIG_SND_PXA2XX_LIB_AC97) -static pxa2xx_audio_ops_t em_x270_ac97_info = { - .reset_gpio = 113, -}; - -static void __init em_x270_init_ac97(void) -{ - pxa_set_ac97_info(&em_x270_ac97_info); -} -#else -static inline void em_x270_init_ac97(void) {} -#endif - -#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static const unsigned int em_x270_module_matrix_keys[] = { - KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), - KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), - KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), -}; - -static struct matrix_keymap_data em_x270_matrix_keymap_data = { - .keymap = em_x270_module_matrix_keys, - .keymap_size = ARRAY_SIZE(em_x270_module_matrix_keys), -}; - -struct pxa27x_keypad_platform_data em_x270_module_keypad_info = { - /* code map for the matrix keys */ - .matrix_key_rows = 3, - .matrix_key_cols = 3, - .matrix_keymap_data = &em_x270_matrix_keymap_data, -}; - -static const unsigned int em_x270_exeda_matrix_keys[] = { - KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL), - KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE), - KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL), - KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH), - - KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M), - KEY(1, 2, KEY_N), KEY(1, 3, KEY_B), - KEY(1, 4, KEY_V), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z), - - KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON), - KEY(2, 2, KEY_L), KEY(2, 3, KEY_K), - KEY(2, 4, KEY_J), KEY(2, 5, KEY_H), - KEY(2, 6, KEY_G), KEY(2, 7, KEY_F), - - KEY(3, 0, KEY_D), KEY(3, 1, KEY_S), - KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB), - KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P), - KEY(3, 6, KEY_O), KEY(3, 7, KEY_I), - - KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y), - KEY(4, 2, KEY_T), KEY(4, 3, KEY_R), - KEY(4, 4, KEY_E), KEY(4, 5, KEY_W), - KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS), - - KEY(5, 0, KEY_0), KEY(5, 1, KEY_9), - KEY(5, 2, KEY_8), KEY(5, 3, KEY_7), - KEY(5, 4, KEY_6), KEY(5, 5, KEY_5), - KEY(5, 6, KEY_4), KEY(5, 7, KEY_3), - - KEY(6, 0, KEY_2), KEY(6, 1, KEY_1), - KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END), - KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP), - KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1), - - KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT), - KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME), - KEY(7, 4, 0), KEY(7, 5, 0), - KEY(7, 6, 0), KEY(7, 7, 0), -}; - -static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = { - .keymap = em_x270_exeda_matrix_keys, - .keymap_size = ARRAY_SIZE(em_x270_exeda_matrix_keys), -}; - -struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = { - /* code map for the matrix keys */ - .matrix_key_rows = 8, - .matrix_key_cols = 8, - .matrix_keymap_data = &em_x270_exeda_matrix_keymap_data, -}; - -static void __init em_x270_init_keypad(void) -{ - if (machine_is_em_x270()) - pxa_set_keypad_info(&em_x270_module_keypad_info); - else - pxa_set_keypad_info(&em_x270_exeda_keypad_info); -} -#else -static inline void em_x270_init_keypad(void) {} -#endif - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button gpio_keys_button[] = { - [0] = { - .desc = "sleep/wakeup", - .code = KEY_SUSPEND, - .type = EV_PWR, - .gpio = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data em_x270_gpio_keys_data = { - .buttons = gpio_keys_button, - .nbuttons = 1, -}; - -static struct platform_device em_x270_gpio_keys = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &em_x270_gpio_keys_data, - }, -}; - -static void __init em_x270_init_gpio_keys(void) -{ - platform_device_register(&em_x270_gpio_keys); -} -#else -static inline void em_x270_init_gpio_keys(void) {} -#endif - -/* Quick Capture Interface and sensor setup */ -#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) -static int em_x270_sensor_init(void) -{ - int ret; - - ret = gpio_request(cam_reset, "camera reset"); - if (ret) - return ret; - - gpio_direction_output(cam_reset, 0); - gpio_set_value(cam_reset, 1); - - return 0; -} - -static struct regulator_consumer_supply camera_dummy_supplies[] = { - REGULATOR_SUPPLY("vdd", "0-005d"), -}; - -static struct regulator_init_data camera_dummy_initdata = { - .consumer_supplies = camera_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config camera_dummy_config = { - .supply_name = "camera_vdd", - .input_supply = "vcc cam", - .microvolts = 2800000, - .init_data = &camera_dummy_initdata, -}; - -static struct platform_device camera_supply_dummy_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &camera_dummy_config, - }, -}; - -struct pxacamera_platform_data em_x270_camera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, - .mclk_10khz = 2600, - .sensor_i2c_adapter_id = 0, - .sensor_i2c_address = 0x5d, -}; - -static void __init em_x270_init_camera(void) -{ - if (em_x270_sensor_init() == 0) - pxa_set_camera_info(&em_x270_camera_platform_data); - platform_device_register(&camera_supply_dummy_device); -} -#else -static inline void em_x270_init_camera(void) {} -#endif - -static struct regulator_bulk_data em_x270_gps_consumer_supply = { - .supply = "vcc gps", -}; - -static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = { - .name = "vcc gps", - .num_supplies = 1, - .supplies = &em_x270_gps_consumer_supply, -}; - -static struct platform_device em_x270_gps_userspace_consumer = { - .name = "reg-userspace-consumer", - .id = 0, - .dev = { - .platform_data = &em_x270_gps_consumer_data, - }, -}; - -static struct regulator_bulk_data em_x270_gprs_consumer_supply = { - .supply = "vcc gprs", -}; - -static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = { - .name = "vcc gprs", - .num_supplies = 1, - .supplies = &em_x270_gprs_consumer_supply -}; - -static struct platform_device em_x270_gprs_userspace_consumer = { - .name = "reg-userspace-consumer", - .id = 1, - .dev = { - .platform_data = &em_x270_gprs_consumer_data, - } -}; - -static struct platform_device *em_x270_userspace_consumers[] = { - &em_x270_gps_userspace_consumer, - &em_x270_gprs_userspace_consumer, -}; - -static void __init em_x270_userspace_consumers_init(void) -{ - platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers)); -} - -/* DA9030 related initializations */ -#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \ - static struct regulator_consumer_supply _name##_consumers[] = { \ - REGULATOR_SUPPLY(_supply, _dev_name), \ - } - -REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps"); -REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); -REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio"); -REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); -REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs"); -REGULATOR_CONSUMER(buck2, NULL, "vcc_core"); - -#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ - static struct regulator_init_data _ldo##_data = { \ - .constraints = { \ - .min_uV = _min_uV, \ - .max_uV = _max_uV, \ - .state_mem = { \ - .enabled = 0, \ - }, \ - .valid_ops_mask = _ops_mask, \ - .apply_uV = 1, \ - }, \ - .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ - .consumer_supplies = _ldo##_consumers, \ - }; - -REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo10, 2000000, 3200000, - REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); -REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); -REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE); - -struct led_info em_x270_led_info = { - .name = "em-x270:orange", - .default_trigger = "battery-charging-or-full", -}; - -struct power_supply_info em_x270_psy_info = { - .name = "battery", - .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, - .voltage_max_design = 4200000, - .voltage_min_design = 3000000, - .use_for_apm = 1, -}; - -static void em_x270_battery_low(void) -{ -#if defined(CONFIG_APM_EMULATION) - apm_queue_event(APM_LOW_BATTERY); -#endif -} - -static void em_x270_battery_critical(void) -{ -#if defined(CONFIG_APM_EMULATION) - apm_queue_event(APM_CRITICAL_SUSPEND); -#endif -} - -struct da9030_battery_info em_x270_batterty_info = { - .battery_info = &em_x270_psy_info, - - .charge_milliamp = 1000, - .charge_millivolt = 4200, - - .vbat_low = 3600, - .vbat_crit = 3400, - .vbat_charge_start = 4100, - .vbat_charge_stop = 4200, - .vbat_charge_restart = 4000, - - .vcharge_min = 3200, - .vcharge_max = 5500, - - .tbat_low = 197, - .tbat_high = 78, - .tbat_restart = 100, - - .batmon_interval = 0, - - .battery_low = em_x270_battery_low, - .battery_critical = em_x270_battery_critical, -}; - -#define DA9030_SUBDEV(_name, _id, _pdata) \ - { \ - .name = "da903x-" #_name, \ - .id = DA9030_ID_##_id, \ - .platform_data = _pdata, \ - } - -#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) - -struct da903x_subdev_info em_x270_da9030_subdevs[] = { - DA9030_LDO(3), - DA9030_LDO(5), - DA9030_LDO(10), - DA9030_LDO(12), - DA9030_LDO(19), - - DA9030_SUBDEV(regulator, BUCK2, &buck2_data), - - DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), - DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), - DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), -}; - -static struct da903x_platform_data em_x270_da9030_info = { - .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), - .subdevs = em_x270_da9030_subdevs, -}; - -static struct i2c_board_info em_x270_i2c_pmic_info = { - I2C_BOARD_INFO("da9030", 0x49), - .irq = PXA_GPIO_TO_IRQ(0), - .platform_data = &em_x270_da9030_info, -}; - -static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { - .use_pio = 1, -}; - -static void __init em_x270_init_da9030(void) -{ - pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); - i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); -} - -static struct pca953x_platform_data exeda_gpio_ext_pdata = { - .gpio_base = 128, -}; - -static struct i2c_board_info exeda_i2c_info[] = { - { - I2C_BOARD_INFO("pca9555", 0x21), - .platform_data = &exeda_gpio_ext_pdata, - }, -}; - -static struct i2c_pxa_platform_data em_x270_i2c_info = { - .fast_mode = 1, -}; - -static void __init em_x270_init_i2c(void) -{ - pxa_set_i2c_info(&em_x270_i2c_info); - - if (machine_is_exeda()) - i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info)); -} - -static void __init em_x270_module_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); - - mmc_cd = GPIO13_MMC_CD; - nand_rb = GPIO56_NAND_RB; - dm9000_flags = DM9000_PLATF_32BITONLY; - cam_reset = GPIO93_CAM_RESET; - usb_hub_reset = GPIO16_USB_HUB_RESET; -} - -static void __init em_x270_exeda_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); - - mmc_cd = GPIO114_MMC_CD; - nand_rb = GPIO20_NAND_RB; - dm9000_flags = DM9000_PLATF_16BITONLY; - cam_reset = GPIO130_CAM_RESET; - usb_hub_reset = GPIO10_USB_HUB_RESET; -} - -static void __init em_x270_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); - - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - -#ifdef CONFIG_PM - pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); -#endif - - if (machine_is_em_x270()) - em_x270_module_init(); - else if (machine_is_exeda()) - em_x270_exeda_init(); - else - panic("Unsupported machine: %d\n", machine_arch_type); - - em_x270_init_da9030(); - em_x270_init_dm9000(); - em_x270_init_rtc(); - em_x270_init_nand(); - em_x270_init_nor(); - em_x270_init_lcd(); - em_x270_init_mmc(); - em_x270_init_ohci(); - em_x270_init_keypad(); - em_x270_init_gpio_keys(); - em_x270_init_ac97(); - em_x270_init_spi(); - em_x270_init_i2c(); - em_x270_init_camera(); - em_x270_userspace_consumers_init(); - - regulator_has_full_constraints(); -} - -MACHINE_START(EM_X270, "Compulab EM-X270") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = em_x270_init, - .restart = pxa_restart, -MACHINE_END - -MACHINE_START(EXEDA, "Compulab eXeda") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = em_x270_init, - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h deleted file mode 100644 index d54031c4f3df..000000000000 --- a/arch/arm/mach-pxa/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-pxa/include/mach/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) - -#endif -- 2.26.2

2 3

Pulseaudio complaining there is an Alsa bug?
by Stuart Naylor 22 May '20

22 May '20

Alsa 1.1.8 On Raspbian Buster May 22 18:32:28 raspberrypi pulseaudio[607]: E: [alsa-source-USB Audio] alsa-source.c: ALSA woke us up to read new data from the device, but there was actually nothing to read. May 22 18:32:28 raspberrypi pulseaudio[607]: E: [alsa-source-USB Audio] alsa-source.c: Most likely this is a bug in the ALSA driver 'snd_usb_audio'. Please report this issue to the ALSA developers. May 22 18:32:28 raspberrypi pulseaudio[607]: E: [alsa-source-USB Audio] alsa-source.c: We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. May 22 18:32:31 raspberrypi systemd[1]: systemd-hostnamed.service: Succeeded. May 22 18:34:12 raspberrypi pulseaudio[607]: E: [alsa-sink-USB Audio] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write. May 22 18:34:12 raspberrypi pulseaudio[607]: E: [alsa-sink-USB Audio] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_usb_audio'. Please report this issue to the ALSA developers. May 22 18:34:12 raspberrypi pulseaudio[607]: E: [alsa-sink-USB Audio] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. pi@raspberrypi:~ $ sudo lsusb -v -s 1:3 Bus 001 Device 003: ID 040d:3400 VIA Technologies, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x040d VIA Technologies, Inc. idProduct 0x3400 bcdDevice 0.90 iManufacturer 1 VIA Technologies Inc. iProduct 2 VIA USB Dongle iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0206 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x0075 bInCollection 2 baInterfaceNr(0) 1 baInterfaceNr(1) 2 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0201 Microphone bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 6 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 4 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 14 iTerminal 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 8 bSourceID 2 bControlSize 1 bmaControls(0) 0x40 Automatic Gain Control bmaControls(1) 0x00 bmaControls(2) 0x00 iFeature 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 6 bSourceID 10 bControlSize 1 bmaControls(0) 0x01 Mute Control bmaControls(1) 0x02 Volume Control bmaControls(2) 0x02 Volume Control iFeature 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 9 bSourceID 8 bControlSize 1 bmaControls(0) 0x01 Mute Control bmaControls(1) 0x02 Volume Control bmaControls(2) 0x02 Volume Control iFeature 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 7 bSourceID 8 bControlSize 1 bmaControls(0) 0x03 Mute Control Volume Control bmaControls(1) 0x00 bmaControls(2) 0x00 iFeature 0 AudioControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 4 (MIXER_UNIT) bUnitID 10 bNrInPins 2 baSourceID(0) 1 baSourceID(1) 7 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 bmControls(0) 0x00 iMixer 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 4 (MIXER_UNIT) bUnitID 14 bNrInPins 1 baSourceID(0) 9 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 bmControls(0) 0x00 iMixer 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 2 Discrete tSamFreq[ 0] 48000 tSamFreq[ 1] 44100 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 1 Milliseconds wLockDelay 0x0001 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 2 Discrete tSamFreq[ 0] 48000 tSamFreq[ 1] 44100 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0120 1x 288 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 1 Milliseconds wLockDelay 0x0001 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 96000 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0180 1x 384 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bLockDelayUnits 1 Milliseconds wLockDelay 0x0001 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 96000 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0240 1x 576 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bLockDelayUnits 1 Milliseconds wLockDelay 0x0001 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 2 Discrete tSamFreq[ 0] 48000 tSamFreq[ 1] 44100 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x00c8 1x 200 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 2 Discrete tSamFreq[ 0] 48000 tSamFreq[ 1] 44100 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x012c 1x 300 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 96000 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0188 1x 392 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bLockDelayUnits 0 Undefined wLockDelay 0x0000 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 1 Discrete tSamFreq[ 0] 96000 Endpoint Descriptor: Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

1 0

[PATCH 0/2] firewire: obsolete cast of function callback toward CFI
by Takashi Sakamoto 22 May '20

22 May '20

Hi, Oscar Carter works for Control Flow Integrity build. Any cast of function callback is inconvenient for the work. Unfortunately, current code of firewire-core driver includes the cast[1] and Oscar posted some patches to remove it[2]. The patch is itself good. However, it includes changes existent kernel API and all of drivers as user of the API get affects from the change. This patchset is an alternative idea to add a new kernel API specific for multichannel isoc context. The existent kernel API and drivers is left as is. Practically, no in-kernel drivers use the additional API. Although the API is exported in the patchset, it's better to discuss about unexporting the API. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/dri… [2] https://lore.kernel.org/lkml/20200519173425.4724-1-oscar.carter@gmx.com/ Regards Takashi Sakamoto (2): firewire-core: add kernel API to construct multichannel isoc context firewire-core: obsolete cast of function callback drivers/firewire/core-cdev.c | 44 +++++++++++++++++++----------------- drivers/firewire/core-iso.c | 17 ++++++++++++++ include/linux/firewire.h | 3 +++ 3 files changed, 43 insertions(+), 21 deletions(-) -- 2.25.1

2 3

[PATCH] ASoC: only first codec is master in multicodec setup
by Johannes Krude 22 May '20

22 May '20

When using multiple codecs, at most one codec should generate the master clock. All codecs except the first are therefore configured for slave mode. Signed-off-by: Johannes Krude <johannes(a)krude.de> --- sound/soc/soc-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index e697258d2..13a7d5b52 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1417,7 +1417,15 @@ int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd, int ret; for_each_rtd_codec_dais(rtd, i, codec_dai) { - ret = snd_soc_dai_set_fmt(codec_dai, dai_fmt); + unsigned int codec_dai_fmt = dai_fmt; + + // there can only be one master when using multiple codecs + if (i && (codec_dai_fmt & SND_SOC_DAIFMT_MASTER_MASK)) { + codec_dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK; + codec_dai_fmt |= SND_SOC_DAIFMT_CBS_CFS; + } + + ret = snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt); if (ret != 0 && ret != -ENOTSUPP) { dev_warn(codec_dai->dev, "ASoC: Failed to set DAI format: %d\n", ret); -- 2.25.1

1 0

[PATCH 00/14] ALSA: firewire-motu: code refactoring to obsolete protocol structure
by Takashi Sakamoto 22 May '20

22 May '20

Hi, ALSA firewire-motu driver becomes to support more models since its first commit 2017. As a result, the original structure for generation-dependent protocol is not suitable for differences between models in some cases. This patchset is for refactoring the driver to obsolete the protocol structure. Some helper functions are added with condition statement for protocol version so that the function calls protocol-dependent function. Instead of the protocol structure, specification structure is used to represent model information and to choose model-dependent operation so that it's easy to handle model-dependent quirks. Additionally, this patchset changes the way to calculate the number of chunks in data block. Current implementation calculates by the fixed number of analog input/output ports and flags in the specification structure. Although the flags can represent any physical input/output of the model, it's difficult to debug for supported model and to add support new models, especially for model-dependent quirks. This patchset adds each table for the fixed number of chunks of each model. The calculation is just done for differed part of chunks. Takashi Sakamoto (14): ALSA: firewire-motu: move spec data to v2 protocol file ALSA: firewire-motu: move spec data to v3 protocol file ALSA: firewire-motu: localize protocol data ALSA: firewire-motu: add wrapper functions for protocol-dependent operations ALSA: firewire-motu: drop protocol structure ALSA: firewire-motu: add model-specific table of chunk count ALSA: firewire-motu: add alternative functions to detect packet format for protocol v2 ALSA: firewire-motu: add alternative functions to detect packet format for protocol v3 ALSA: firewire-motu: use table-based calculation of packet formats for proc ALSA: firewire-motu: use table-based calculation of packet formats for stream management ALSA: firewire-motu: remove obsoleted codes ALSA: firewire-motu: refactoring protocol v2 for clock source getter ALSA: firewire-motu: refactoring protocol v3 for clock source getter ALSA: firewire-motu: refactoring protocol v2 for fetching mode switch sound/firewire/motu/amdtp-motu.c | 19 +- sound/firewire/motu/motu-pcm.c | 14 +- sound/firewire/motu/motu-proc.c | 20 +- sound/firewire/motu/motu-protocol-v2.c | 314 +++++++++++++++---------- sound/firewire/motu/motu-protocol-v3.c | 303 ++++++++++++------------ sound/firewire/motu/motu-stream.c | 16 +- sound/firewire/motu/motu.c | 113 +-------- sound/firewire/motu/motu.h | 124 +++++++--- 8 files changed, 463 insertions(+), 460 deletions(-) -- 2.25.1

2 15

[PATCH AUTOSEL 4.19 07/19] ALSA: usb-audio: add mapping for ASRock TRX40 Creator
by Sasha Levin 22 May '20

22 May '20

From: Andrew Oakley <andrew(a)adoakley.name> [ Upstream commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be ] This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table. This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid. alsa-info.sh report for this board: http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c Signed-off-by: Andrew Oakley <andrew(a)adoakley.name> Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/mixer_maps.c | 5 +++++ sound/usb/quirks-table.h | 1 + 2 files changed, 6 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index 1689e4f242df..d7a8b23b335b 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -543,6 +543,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .map = trx40_mobo_map, .connector_map = trx40_mobo_connector_map, }, + { /* Asrock TRX40 Creator */ + .id = USB_ID(0x26ce, 0x0a01), + .map = trx40_mobo_map, + .connector_map = trx40_mobo_connector_map, + }, { 0 } /* terminator */ }; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 774aeedde071..4f8a2b98e090 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3412,6 +3412,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */ ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */ +ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ #undef ALC1220_VB_DESKTOP #undef USB_DEVICE_VENDOR_SPEC -- 2.25.1

1 0

[PATCH AUTOSEL 5.4 08/32] ALSA: usb-audio: add mapping for ASRock TRX40 Creator
by Sasha Levin 22 May '20

22 May '20

From: Andrew Oakley <andrew(a)adoakley.name> [ Upstream commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be ] This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table. This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid. alsa-info.sh report for this board: http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c Signed-off-by: Andrew Oakley <andrew(a)adoakley.name> Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/mixer_maps.c | 5 +++++ sound/usb/quirks-table.h | 1 + 2 files changed, 6 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index 39d6c6fa5e33..2255f9abd7a5 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -529,6 +529,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .map = trx40_mobo_map, .connector_map = trx40_mobo_connector_map, }, + { /* Asrock TRX40 Creator */ + .id = USB_ID(0x26ce, 0x0a01), + .map = trx40_mobo_map, + .connector_map = trx40_mobo_connector_map, + }, { 0 } /* terminator */ }; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8c2f5c23e1b4..aa4c16ce0e57 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3647,6 +3647,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */ ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */ +ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ #undef ALC1220_VB_DESKTOP #undef USB_DEVICE_VENDOR_SPEC -- 2.25.1

1 0

[PATCH AUTOSEL 5.6 09/41] ALSA: usb-audio: add mapping for ASRock TRX40 Creator
by Sasha Levin 22 May '20

22 May '20

From: Andrew Oakley <andrew(a)adoakley.name> [ Upstream commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be ] This is another TRX40 based motherboard with ALC1220-VB USB-audio that requires a static mapping table. This motherboard also has a PCI device which advertises no codecs. The PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD vendor ID, don't blacklist for now in case other boards have a working audio device with the same ssid. alsa-info.sh report for this board: http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c Signed-off-by: Andrew Oakley <andrew(a)adoakley.name> Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/mixer_maps.c | 5 +++++ sound/usb/quirks-table.h | 1 + 2 files changed, 6 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index 0260c750e156..bfdc6ad52785 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -549,6 +549,11 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = { .map = trx40_mobo_map, .connector_map = trx40_mobo_connector_map, }, + { /* Asrock TRX40 Creator */ + .id = USB_ID(0x26ce, 0x0a01), + .map = trx40_mobo_map, + .connector_map = trx40_mobo_connector_map, + }, { 0 } /* terminator */ }; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8c2f5c23e1b4..aa4c16ce0e57 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3647,6 +3647,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */ ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */ +ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ #undef ALC1220_VB_DESKTOP #undef USB_DEVICE_VENDOR_SPEC -- 2.25.1

1 0

[PATCH for-5.8] ASoC: amd: doesn't print error log if the return value is EPROBE_DEFER
by Hui Wang 22 May '20

22 May '20

The machine driver module and codec driver module don't have dependency, it is possible that the machine driver is loaded ahead of the codec driver, then the register_card() will fail and return EPROBE_DEFER, in this case the driver should not print error log since this is not a real failure. For example, I saw this log from a machine with amd renoir audio: acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517 After applying this patch, there is no error log to confuse users and audio works after the codec driver is loaded. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/amd/acp-da7219-max98357a.c | 3 ++- sound/soc/amd/acp-rt5645.c | 3 ++- sound/soc/amd/acp3x-rt5682-max9836.c | 3 ++- sound/soc/amd/renoir/acp3x-rn.c | 7 ++++--- 4 files changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index 9414d7269c4f..a7e755a563e8 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -440,7 +440,8 @@ static int cz_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(card, machine); ret = devm_snd_soc_register_card(&pdev->dev, &cz_card); if (ret) { - dev_err(&pdev->dev, + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "devm_snd_soc_register_card(%s) failed: %d\n", cz_card.name, ret); return ret; diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index 73b31f88a6b5..cffd24eae3a3 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -174,7 +174,8 @@ static int cz_probe(struct platform_device *pdev) platform_set_drvdata(pdev, card); ret = devm_snd_soc_register_card(&pdev->dev, &cz_card); if (ret) { - dev_err(&pdev->dev, + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "devm_snd_soc_register_card(%s) failed: %d\n", cz_card.name, ret); return ret; diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e499c00e0c66..16bcaad9ead2 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -346,7 +346,8 @@ static int acp3x_probe(struct platform_device *pdev) ret = devm_snd_soc_register_card(&pdev->dev, &acp3x_card); if (ret) { - dev_err(&pdev->dev, + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "devm_snd_soc_register_card(%s) failed: %d\n", acp3x_card.name, ret); return ret; diff --git a/sound/soc/amd/renoir/acp3x-rn.c b/sound/soc/amd/renoir/acp3x-rn.c index 306134b89a82..95b616fcad30 100644 --- a/sound/soc/amd/renoir/acp3x-rn.c +++ b/sound/soc/amd/renoir/acp3x-rn.c @@ -54,9 +54,10 @@ static int acp_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(card, machine); ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { - dev_err(&pdev->dev, - "snd_soc_register_card(%s) failed: %d\n", - acp_card.name, ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card(%s) failed: %d\n", + acp_card.name, ret); return ret; } return 0; -- 2.17.1

2 3

[PATCH RESEND 0/4] Minor WM8994 MFD/codec fixes
by Marek Szyprowski 22 May '20

22 May '20

Hi! This is a resend of the minor WM8994 MFD/codec driver fixes posted in last days of the February 2020: https://lore.kernel.org/patchwork/project/lkml/list/?series=431296 https://lore.kernel.org/patchwork/project/lkml/list/?series=431721 I hope this time the patches will find their way to mainline. Best regards, Marek Szyprowski Patch summary: Marek Szyprowski (4): mfd: wm8994: Fix driver operation if loaded as modules mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable() mfd: wm8994: Silence warning about supplies during deferred probe ASoC: wm8994: Silence warnings during deferred probe drivers/mfd/wm8994-core.c | 8 +++++++- sound/soc/codecs/wm8994.c | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) -- 2.17.1

4 17

[GIT PULL] soundwire updates for v5.8-rc1
by Vinod Koul 22 May '20

22 May '20

Hi Greg, Please pull to receive updates for soundwire. The big news the sdw_master_device getting completed along with sysfs attributes for master and slave devices. That closes the long cleanup work done by Pierre and Bard for the devices. The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136: Linux 5.7-rc1 (2020-04-12 12:35:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git tags/soundwire-5.8-rc1 for you to fetch changes up to fcbcf1f7b56855ffe1cec768cb1013c5a4c854c3: soundwire: intel: use a single module (2020-05-20 19:24:55 +0530) ---------------------------------------------------------------- soundwire updates for v5.8-rc1 This contains sdw_master_device patches and other updates done by Intel folks. Details: - sdw_master_device to represent the master instances. - sysfs properties for sdw_master_device and sdw_slave. - Documentation update for TDM modes. - some code cleanup patches and odd updates. ---------------------------------------------------------------- Bard Liao (2): soundwire: bus: add unique bus id soundwire: master: add runtime pm support Guennadi Liakhovetski (2): soundwire: (cosmetic) remove multiple superfluous "else" statements soundwire: intel: (cosmetic) remove multiple superfluous "else" statements Kuninori Morimoto (1): soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer Pierre-Louis Bossart (11): soundwire: qcom: fix error handling in probe Documentation: SoundWire: clarify TDM mode support soundwire: slave: don't init debugfs on device registration error soundwire: debugfs: clarify SDPX license with GPL-2.0-only soundwire: bus: reduce verbosity on enumeration soundwire: bus: rename sdw_bus_master_add/delete, add arguments soundwire: bus_type: introduce sdw_slave_type and sdw_master_type soundwire: bus_type: add sdw_master_device support soundwire: disco: s/ch/channels/ soundwire: master: add sysfs support soundwire: add Slave sysfs support Rander Wang (1): soundwire: intel: use a single module Samuel Zou (1): soundwire: qcom: Use IRQF_ONESHOT Vinod Koul (2): soundwire: fix trailing line in sysfs_slave.c soundwire: fix spelling mistake .../ABI/testing/sysfs-bus-soundwire-master | 23 ++ .../ABI/testing/sysfs-bus-soundwire-slave | 91 +++++++ Documentation/driver-api/soundwire/stream.rst | 89 +++++- Documentation/driver-api/soundwire/summary.rst | 7 +- drivers/soundwire/Makefile | 8 +- drivers/soundwire/bus.c | 71 +++-- drivers/soundwire/bus.h | 4 + drivers/soundwire/bus_type.c | 22 +- drivers/soundwire/cadence_master.c | 8 +- drivers/soundwire/debugfs.c | 2 +- drivers/soundwire/intel.c | 13 +- drivers/soundwire/intel_init.c | 4 +- drivers/soundwire/master.c | 172 ++++++++++++ drivers/soundwire/mipi_disco.c | 11 +- drivers/soundwire/qcom.c | 34 ++- drivers/soundwire/slave.c | 10 +- drivers/soundwire/sysfs_local.h | 14 + drivers/soundwire/sysfs_slave.c | 214 +++++++++++++++ drivers/soundwire/sysfs_slave_dpn.c | 300 +++++++++++++++++++++ include/linux/soundwire/sdw.h | 32 ++- include/linux/soundwire/sdw_type.h | 9 +- 21 files changed, 1066 insertions(+), 72 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-master create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-slave create mode 100644 drivers/soundwire/master.c create mode 100644 drivers/soundwire/sysfs_local.h create mode 100644 drivers/soundwire/sysfs_slave.c create mode 100644 drivers/soundwire/sysfs_slave_dpn.c -- ~Vinod

2 1

[PATCH v2 0/7] ASoC: add soc-link
by Kuninori Morimoto 22 May '20

22 May '20

Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This v2 patch-set creates new snd_soc_link_xxx() functions which handles dai_link related operation, and implmement these at new soc-link.c. v1 -> v2 - #include <sound/soc-link.h> is added on each c source file instead of soc.h - not have extra error message after snd_soc_link_xxx(), because it already indicate it via snc_link_ret() - snd_soc_link_compr_xxx() doesn't have rtd parameter, because it can be created from cstream Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 27 +++++++ sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 46 ++++-------- sound/soc/soc-core.c | 18 ++--- sound/soc/soc-dai.c | 9 ++- sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 7 files changed, 219 insertions(+), 119 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1 Thank you for your help !! Best regards --- Kuninori Morimoto

2 10

Difference between PlaybackMixer and PlaybackMixerElem
by Curtis Malainey 22 May '20

22 May '20

Hello Jaroslav, Just a quick question, what is the difference between PlaybackMixer and PlaybackMixerElem? I can see that one can be parsed using snd_use_case_parse _selem_id? Is that the only difference? Thanks Curtis

1 0

[PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function
by Lukasz Majczak 21 May '20

21 May '20

Split be_hw_params_fixup function for different codecs as current common function, leads to crash while trying to get snd_soc_dpcm with container_of() macro in kabylake_ssp_fixup(). The crash call path looks as below: soc_pcm_hw_params() snd_soc_dai_hw_params(codec_dai, substream, &codec_params); rtd->dai_link->be_hw_params_fixup(rtd, params) kabylake_ssp_fixup() In this case, codec_params is just a copy of an internal structure and is not embedded into struct snd_soc_dpcm thus we cannot use container_of() on it. Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> --- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 130 ++++++++++++------ 1 file changed, 85 insertions(+), 45 deletions(-) diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 1b1f8d7a4ea3..12a9983979e0 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -171,8 +171,8 @@ static const struct snd_soc_dapm_route kabylake_map[] = { { "hs_in", NULL, "ssp1 Rx" }, { "ssp1 Rx", NULL, "AIF Capture" }, - { "codec1_in", NULL, "ssp0 Rx" }, - { "ssp0 Rx", NULL, "AIF1 Capture" }, + { "codec1_in", NULL, "DMIC01 Rx" }, + { "DMIC01 Rx", NULL, "AIF1 Capture" }, /* IV feedback path */ { "codec0_fb_in", NULL, "ssp0 Rx"}, @@ -328,42 +328,52 @@ static const struct snd_soc_ops kabylake_rt5663_fe_ops = { .startup = kbl_fe_startup, }; -static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, - struct snd_pcm_hw_params *params) +static void kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params, snd_pcm_format_t pcm_fmt) { struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); - struct snd_interval *chan = hw_param_interval(params, + struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - struct snd_soc_dpcm *dpcm = container_of( - params, struct snd_soc_dpcm, hw_params); - struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; - struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; /* * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ - if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || - !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || - !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { - rate->min = rate->max = 48000; - chan->min = chan->max = 2; - snd_mask_none(fmt); - snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); - } else if (!strcmp(fe_dai_link->name, "Kbl Audio DMIC cap")) { + + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + snd_mask_none(fmt); + snd_mask_set_format(fmt, pcm_fmt); +} + +static int kabylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S16_LE); + return 0; +} + +static int kabylake_ssp1_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + + kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S24_LE); + return 0; +} + +static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + if (params_channels(params) == 2 || DMIC_CH(dmic_constraints) == 2) - chan->min = chan->max = 2; + channels->min = channels->max = 2; else - chan->min = chan->max = 4; - } - /* - * The speaker on the SSP0 supports S16_LE and not S24_LE. - * thus changing the mask here - */ - if (!strcmp(be_dai_link->name, "SSP0-Codec")) - snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); + channels->min = channels->max = 4; return 0; } @@ -400,20 +410,6 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, int ret = 0, j; for_each_rtd_codec_dais(rtd, j, codec_dai) { - if (!strcmp(codec_dai->component->name, RT5514_DEV_NAME)) { - ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0, 8, 16); - if (ret < 0) { - dev_err(rtd->dev, "set TDM slot err:%d\n", ret); - return ret; - } - - ret = snd_soc_dai_set_sysclk(codec_dai, - RT5514_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(rtd->dev, "set sysclk err: %d\n", ret); - return ret; - } - } if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) { ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16); if (ret < 0) { @@ -433,10 +429,37 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, return ret; } +static int kabylake_dmic01_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int ret = 0; + + ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0xF, 0, 8, 16); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, + RT5514_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(rtd->dev, "set sysclk err: %d\n", ret); + return ret; + } + + return ret; +} + static struct snd_soc_ops kabylake_ssp0_ops = { .hw_params = kabylake_ssp0_hw_params, }; +static struct snd_soc_ops kabylake_dmic01_ops = { + .hw_params = kabylake_dmic01_hw_params, +}; + + static const unsigned int channels_dmic[] = { 4, }; @@ -507,14 +530,19 @@ SND_SOC_DAILINK_DEF(ssp0_pin, SND_SOC_DAILINK_DEF(ssp0_codec, DAILINK_COMP_ARRAY( /* Left */ COMP_CODEC(MAXIM_DEV0_NAME, KBL_MAXIM_CODEC_DAI), - /* Right */COMP_CODEC(MAXIM_DEV1_NAME, KBL_MAXIM_CODEC_DAI), - /* dmic */ COMP_CODEC(RT5514_DEV_NAME, KBL_REALTEK_DMIC_CODEC_DAI))); + /* Right */COMP_CODEC(MAXIM_DEV1_NAME, KBL_MAXIM_CODEC_DAI))); SND_SOC_DAILINK_DEF(ssp1_pin, DAILINK_COMP_ARRAY(COMP_CPU("SSP1 Pin"))); SND_SOC_DAILINK_DEF(ssp1_codec, DAILINK_COMP_ARRAY(COMP_CODEC(RT5663_DEV_NAME, KBL_REALTEK_CODEC_DAI))); +SND_SOC_DAILINK_DEF(dmic01_pin, + DAILINK_COMP_ARRAY(COMP_CPU("DMIC01 Pin"))); +SND_SOC_DAILINK_DEF(dmic01_codec, + DAILINK_COMP_ARRAY( + COMP_CODEC(RT5514_DEV_NAME, KBL_REALTEK_DMIC_CODEC_DAI))); + SND_SOC_DAILINK_DEF(idisp1_pin, DAILINK_COMP_ARRAY(COMP_CPU("iDisp1 Pin"))); SND_SOC_DAILINK_DEF(idisp1_codec, @@ -618,9 +646,8 @@ static struct snd_soc_dai_link kabylake_dais[] = { SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, - .be_hw_params_fixup = kabylake_ssp_fixup, + .be_hw_params_fixup = kabylake_ssp0_fixup, .dpcm_playback = 1, - .dpcm_capture = 1, .ops = &kabylake_ssp0_ops, SND_SOC_DAILINK_REG(ssp0_pin, ssp0_codec, platform), }, @@ -632,12 +659,25 @@ static struct snd_soc_dai_link kabylake_dais[] = { .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, - .be_hw_params_fixup = kabylake_ssp_fixup, + .be_hw_params_fixup = kabylake_ssp1_fixup, .ops = &kabylake_rt5663_ops, .dpcm_playback = 1, .dpcm_capture = 1, SND_SOC_DAILINK_REG(ssp1_pin, ssp1_codec, platform), }, + { + .name = "dmic01", + .id = 2, + .no_pcm = 1, + .dai_fmt = SND_SOC_DAIFMT_DSP_B | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ignore_pmdown_time = 1, + .be_hw_params_fixup = kabylake_dmic_fixup, + .dpcm_capture = 1, + .ops = &kabylake_dmic01_ops, + SND_SOC_DAILINK_REG(dmic01_pin, dmic01_codec, platform), + }, { .name = "iDisp1", .id = 3, base-commit: a4f6fc98cd2fa1774bcaeb248c67156ef9402a56 -- 2.25.1

3 5

[PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms
by Michal Simek 21 May '20

21 May '20

Hi, recently we wanted to update xilinx intc driver and we found that function which we wanted to remove is still wired by ancient Xilinx PowerPC platforms. Here is the thread about it. https://lore.kernel.org/linux-next/48d3232d-0f1d-42ea-3109-f44bbabfa2e8@xil… I have been talking about it internally and there is no interest in these platforms and it is also orphan for quite a long time. None is really running/testing these platforms regularly that's why I think it makes sense to remove them also with drivers which are specific to this platform. U-Boot support was removed in 2017 without anybody complain about it https://github.com/Xilinx/u-boot-xlnx/commit/98f705c9cefdfdba62c069821bbba1… Based on current ppc/next. If anyone has any objection about it, please let me know. Thanks, Michal Michal Simek (2): sound: ac97: Remove sound driver for ancient platform powerpc: Remove Xilinx PPC405/PPC440 support Documentation/devicetree/bindings/xilinx.txt | 143 -- Documentation/powerpc/bootwrapper.rst | 28 +- MAINTAINERS | 6 - arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/boot/Makefile | 7 +- arch/powerpc/boot/dts/Makefile | 1 - arch/powerpc/boot/dts/virtex440-ml507.dts | 406 ------ arch/powerpc/boot/dts/virtex440-ml510.dts | 466 ------- arch/powerpc/boot/ops.h | 1 - arch/powerpc/boot/serial.c | 5 - arch/powerpc/boot/uartlite.c | 79 -- arch/powerpc/boot/virtex.c | 97 -- arch/powerpc/boot/virtex405-head.S | 31 - arch/powerpc/boot/wrapper | 8 - arch/powerpc/configs/40x/virtex_defconfig | 75 - arch/powerpc/configs/44x/virtex5_defconfig | 74 - arch/powerpc/configs/ppc40x_defconfig | 8 - arch/powerpc/configs/ppc44x_defconfig | 8 - arch/powerpc/include/asm/xilinx_intc.h | 16 - arch/powerpc/include/asm/xilinx_pci.h | 21 - arch/powerpc/kernel/cputable.c | 39 - arch/powerpc/platforms/40x/Kconfig | 31 - arch/powerpc/platforms/40x/Makefile | 1 - arch/powerpc/platforms/40x/virtex.c | 54 - arch/powerpc/platforms/44x/Kconfig | 37 - arch/powerpc/platforms/44x/Makefile | 2 - arch/powerpc/platforms/44x/virtex.c | 60 - arch/powerpc/platforms/44x/virtex_ml510.c | 30 - arch/powerpc/platforms/Kconfig | 4 - arch/powerpc/sysdev/Makefile | 2 - arch/powerpc/sysdev/xilinx_intc.c | 88 -- arch/powerpc/sysdev/xilinx_pci.c | 132 -- arch/powerpc/xmon/ppc-dis.c | 6 - arch/powerpc/xmon/ppc-opc.c | 23 - arch/powerpc/xmon/ppc.h | 5 - drivers/char/Kconfig | 2 +- drivers/video/fbdev/Kconfig | 2 +- sound/drivers/Kconfig | 12 - sound/drivers/Makefile | 2 - sound/drivers/ml403-ac97cr.c | 1298 ------------------ 40 files changed, 7 insertions(+), 3305 deletions(-) delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts delete mode 100644 arch/powerpc/boot/uartlite.c delete mode 100644 arch/powerpc/boot/virtex.c delete mode 100644 arch/powerpc/boot/virtex405-head.S delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h delete mode 100644 arch/powerpc/platforms/40x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c delete mode 100644 sound/drivers/ml403-ac97cr.c -- 2.26.0

10 29

[PATCH 1/2] soundwire: intel: use a single module
by Bard Liao 21 May '20

21 May '20

From: Rander Wang <rander.wang(a)intel.com> It's not clear why we have two modules for the Intel controller/master support when there is a single Kconfig. This adds complexity for no good reason, the two parts need to work together anyways. Signed-off-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/Makefile | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile index 7319918e0aec..4f6094767212 100644 --- a/drivers/soundwire/Makefile +++ b/drivers/soundwire/Makefile @@ -16,12 +16,9 @@ soundwire-cadence-objs := cadence_master.o obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o #Intel driver -soundwire-intel-objs := intel.o +soundwire-intel-objs := intel.o intel_init.o obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o -soundwire-intel-init-objs := intel_init.o -obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel-init.o - #Qualcomm driver soundwire-qcom-objs := qcom.o obj-$(CONFIG_SOUNDWIRE_QCOM) += soundwire-qcom.o -- 2.17.1

3 6

ASoC dailink capture/playback flags
by Pierre-Louis Bossart 21 May '20

21 May '20

Hi, Some of us at Intel are confused with multiple definitions of capture/playback dailink flags (credits to Rander Wang for reporting this in https://github.com/thesofproject/linux/pull/2070). struct snd_soc_dai_link { [...] /* For unidirectional dai links */ unsigned int playback_only:1; unsigned int capture_only:1; [...] /* DPCM capture and Playback support */ unsigned int dpcm_capture:1; unsigned int dpcm_playback:1; [...] }; And of course when you start looking at some machine drivers, there are confusions, e.g. below with DPCM front-ends using one or the other set, and with copy-paste and partial diffs, this propagates without being consistent or being noticed: [GLK_DPCM_AUDIO_HS_PB] = { .name = "Glk Audio Headset Playback", .stream_name = "Headset Audio", .dpcm_playback = 1, <<<< .nonatomic = 1, .dynamic = 1, SND_SOC_DAILINK_REG(system2, dummy, platform), }, [GLK_DPCM_AUDIO_ECHO_REF_CP] = { .name = "Glk Audio Echo Reference cap", .stream_name = "Echoreference Capture", .init = NULL, .capture_only = 1, <<<< should this be .dpcm_capture = 1? .nonatomic = 1, .dynamic = 1, SND_SOC_DAILINK_REG(echoref, dummy, platform), }, [GLK_DPCM_AUDIO_REF_CP] = { .name = "Glk Audio Reference cap", .stream_name = "Refcap", .init = NULL, .dpcm_capture = 1, <<<< .nonatomic = 1, .dynamic = 1, .ops = &geminilake_refcap_ops, SND_SOC_DAILINK_REG(reference, dummy, platform), }, So here are the questions: - when using DPCM, is there an expectation to use dpcm_ flags only? - should we instead use playback/capture_only when only one of the two dpcm_ flags is set? - should we flags errors if we ever encounter cases with e.g. dpcm_playback = true and capture_only = true? - do we actually need two sets of definitions? There are very few users of the .playback_only and .capture_only flags and only a single place where it's checked in soc-pcm.c Thanks for your feedback -Pierre

3 2

latency.c randomly gives persistent scratchy audio
by GitHub issues - opened 20 May '20

20 May '20

alsa-project/alsa-lib issue #53 was opened from archenemies: I had been intending to modify the example program test/latency.c in the alsa-lib distribution to build a filter. However, I found the original program itself was unable to produce a good transfer of audio. I am using it like ./latency -C plughw:3 -P hw:0,7 -r 44100 -m 256 -M 512 -c 2 -s 3000 but I also tried higher numbers (2048 and 4096) for -m and -M and this didn't help. This command should theoretically work to transfer audio samples between the capture device, hw:3 which is a USB audio card with 3.5mm input, and the playback device hw:0,7 which is an HDMI monitor with builtin speakers. The second device has no volume control in alsamixer. Most of the times when I run the above command, there is a scratchy sound which can be heard here mpv http://ix.io/2mPY In the recording, whenever the music stops and starts again, it's because I killed the 'latency' program and restarted it. You can hear that there are different levels of distortion from one invocation to the next. The signal is coming from a digital audio player which is plugged into the USB sound card via analog 3.5mm. Nothing else changes about the setup, I am just stopping and starting "./latency". The same level of scratchiness usually persists throughout the running of the program, however, each time the program is restarted a new level of scratchiness is chosen seemingly at random. It's almost like every time the program is started, a threshold is chosen uniformly at random, such that whenever the audio signal exceeds this threshold then it gets clipped. The other circumstances would seem to rule out buffer underflow or crystal drift, and there is no warning of dropped samples. I made some experiments, and even the effect of dropping every 10th sample sounds less distorted than this. But if it is from crystal drift, it should be more like every 1/1000th sample getting dropped. The sound that I am hearing is more like the result of zeroing or thresholding all the samples which exceed a certain amplitude, and a significant number of samples must be affected to make it sound this bad. I do not notice this problem with "ecasound -i .. -o .." or with Pulseaudio's "module-loopback", which are both able to produce clear audio. As I uderstand it, ecasound does not do resampling to account for crystal drift. Pulseaudio's module-loopback does do adaptive resampling. I'm including the command that I use, and the output. I don't know what some of those words mean - tstamp_mode, start_threshold, silence_threshold, period_event. Anyway, please let me know if it is possible to make this program behave more like Pulseaudio or Ecasound. I'll be happy to assist with reproduction issues and so on. $ ./latency -P hw:0,7 -C plughw:3 -r 44100 -m 4096 -M 16384 -c 2 -s 3000 !!!Scheduler set to Round Robin with priority 99 FAILED!!! Playback device is hw:0,7 Capture device is plughw:3 Parameters are 44100Hz, S16_LE, 2 channels, non-blocking mode Poll mode: no Loop limit is 132300000 frames, minimum latency = 4096, maximum latency = 16384 Hardware PCM card 0 'HD-Audio Generic' device 7 subdevice 0 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 4096 period_size : 2048 period_time : 46439 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 2048 period_event : 0 start_threshold : 2147483647 stop_threshold : 4096 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 appl_ptr : 0 hw_ptr : 0 Plug PCM: Route conversion PCM (sformat=S16_LE) Transformation table: 0 <- 0 1 <- 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 4096 period_size : 2048 period_time : 46439 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 2048 period_event : 0 start_threshold : 2147483647 stop_threshold : 4096 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 Slave: Hardware PCM card 3 'USB Audio Device' device 0 subdevice 0 Its setup is: stream : CAPTURE access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 1 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 4096 period_size : 2048 period_time : 46439 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 2048 period_event : 0 start_threshold : 2147483647 stop_threshold : 4096 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 appl_ptr : 0 hw_ptr : 0 Trying latency 4096 frames, 92879.819us, 92.879819ms (10.7666Hz) The Linux distribution is Arch, the kernel is 5.6.10-arch1-1, x86_64 GNU/Linux. Thank you. Issue URL : https://github.com/alsa-project/alsa-lib/issues/53 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH] ASoC: mmp-sspa: Fix the error handling in probe()
by Lubomir Rintel 20 May '20

20 May '20

If we fail after pm_runtime_enable(), we fail to undo it. Same with clk_prepare_enable(). Let's order them after all things that can fail. Fixes: 7d98cc648253 ("ASoC: mmp-sspa: Add support for the runtime power management") Signed-off-by: Lubomir Rintel <lkundrak(a)v3.sk> --- sound/soc/pxa/mmp-sspa.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c index 60bf6fe05315..77a6d2998570 100644 --- a/sound/soc/pxa/mmp-sspa.c +++ b/sound/soc/pxa/mmp-sspa.c @@ -467,6 +467,7 @@ static const struct snd_soc_component_driver mmp_sspa_component = { static int asoc_mmp_sspa_probe(struct platform_device *pdev) { struct sspa_priv *sspa; + int ret; sspa = devm_kzalloc(&pdev->dev, sizeof(struct sspa_priv), GFP_KERNEL); @@ -518,8 +519,6 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) return PTR_ERR(sspa->sysclk); } } - pm_runtime_enable(&pdev->dev); - clk_prepare_enable(sspa->audio_clk); platform_set_drvdata(pdev, sspa); sspa->playback_dma_data.maxburst = 4; @@ -529,16 +528,21 @@ static int asoc_mmp_sspa_probe(struct platform_device *pdev) sspa->playback_dma_data.addr = 0x80 + SSPA_D; if (pdev->dev.of_node) { - int ret; - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, &mmp_pcm_config, 0); if (ret) return ret; } - return devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component, - &mmp_sspa_dai, 1); + ret = devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component, + &mmp_sspa_dai, 1); + if (ret) + return ret; + + pm_runtime_enable(&pdev->dev); + clk_prepare_enable(sspa->audio_clk); + + return 0; } static int asoc_mmp_sspa_remove(struct platform_device *pdev) -- 2.26.2

2 1

[PATCH 0/3] soundwire: add sysfs support
by Bard Liao 20 May '20

20 May '20

Add soundwire sysfs support. Pierre-Louis Bossart (3): soundwire: disco: s/ch/channels/ soundwire: master: add sysfs support soundwire: add Slave sysfs support .../ABI/testing/sysfs-bus-soundwire-master | 23 ++ .../ABI/testing/sysfs-bus-soundwire-slave | 91 ++++++ drivers/soundwire/Makefile | 3 +- drivers/soundwire/bus.c | 1 + drivers/soundwire/bus.h | 1 + drivers/soundwire/bus_type.c | 9 +- drivers/soundwire/master.c | 84 +++++ drivers/soundwire/mipi_disco.c | 11 +- drivers/soundwire/sysfs_local.h | 14 + drivers/soundwire/sysfs_slave.c | 215 +++++++++++++ drivers/soundwire/sysfs_slave_dpn.c | 300 ++++++++++++++++++ include/linux/soundwire/sdw.h | 8 +- 12 files changed, 748 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-master create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-slave create mode 100644 drivers/soundwire/sysfs_local.h create mode 100644 drivers/soundwire/sysfs_slave.c create mode 100644 drivers/soundwire/sysfs_slave_dpn.c -- 2.17.1

3 6

[PATCH 1/5] drivers/powerpc: Replace _ALIGN_UP() by ALIGN()
by Christophe Leroy 20 May '20

20 May '20

_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> --- drivers/ps3/ps3-lpm.c | 6 +++--- drivers/vfio/pci/vfio_pci_nvlink2.c | 2 +- drivers/video/fbdev/ps3fb.c | 4 ++-- sound/ppc/snd_ps3.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 83c45659bc9d..064b5884ba13 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -1096,8 +1096,8 @@ int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, lpm_priv->tb_cache_internal = NULL; lpm_priv->tb_cache = NULL; } else if (tb_cache) { - if (tb_cache != (void *)_ALIGN_UP((unsigned long)tb_cache, 128) - || tb_cache_size != _ALIGN_UP(tb_cache_size, 128)) { + if (tb_cache != (void *)ALIGN((unsigned long)tb_cache, 128) + || tb_cache_size != ALIGN(tb_cache_size, 128)) { dev_err(sbd_core(), "%s:%u: unaligned tb_cache\n", __func__, __LINE__); result = -EINVAL; @@ -1116,7 +1116,7 @@ int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, result = -ENOMEM; goto fail_malloc; } - lpm_priv->tb_cache = (void *)_ALIGN_UP( + lpm_priv->tb_cache = (void *)ALIGN( (unsigned long)lpm_priv->tb_cache_internal, 128); } diff --git a/drivers/vfio/pci/vfio_pci_nvlink2.c b/drivers/vfio/pci/vfio_pci_nvlink2.c index ed20d73cc27c..65c61710c0e9 100644 --- a/drivers/vfio/pci/vfio_pci_nvlink2.c +++ b/drivers/vfio/pci/vfio_pci_nvlink2.c @@ -67,7 +67,7 @@ static size_t vfio_pci_nvgpu_rw(struct vfio_pci_device *vdev, * * This is not fast path anyway. */ - sizealigned = _ALIGN_UP(posoff + count, PAGE_SIZE); + sizealigned = ALIGN(posoff + count, PAGE_SIZE); ptr = ioremap_cache(data->gpu_hpa + posaligned, sizealigned); if (!ptr) return -EFAULT; diff --git a/drivers/video/fbdev/ps3fb.c b/drivers/video/fbdev/ps3fb.c index 834f63edf700..9df78fb77267 100644 --- a/drivers/video/fbdev/ps3fb.c +++ b/drivers/video/fbdev/ps3fb.c @@ -44,7 +44,7 @@ #define GPU_CMD_BUF_SIZE (2 * 1024 * 1024) #define GPU_FB_START (64 * 1024) #define GPU_IOIF (0x0d000000UL) -#define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64) +#define GPU_ALIGN_UP(x) ALIGN((x), 64) #define GPU_MAX_LINE_LENGTH (65536 - 64) #define GPU_INTR_STATUS_VSYNC_0 0 /* vsync on head A */ @@ -1015,7 +1015,7 @@ static int ps3fb_probe(struct ps3_system_bus_device *dev) } #endif - max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF; + max_ps3fb_size = ALIGN(GPU_IOIF, 256*1024*1024) - GPU_IOIF; if (ps3fb_videomemory.size > max_ps3fb_size) { dev_info(&dev->core, "Limiting ps3fb mem size to %lu bytes\n", max_ps3fb_size); diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index 6d2a33b8faa0..b8161a08f2ca 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -926,7 +926,7 @@ static int snd_ps3_driver_probe(struct ps3_system_bus_device *dev) PAGE_SHIFT, /* use system page size */ 0, /* dma type; not used */ NULL, - _ALIGN_UP(SND_PS3_DMA_REGION_SIZE, PAGE_SIZE)); + ALIGN(SND_PS3_DMA_REGION_SIZE, PAGE_SIZE)); dev->d_region->ioid = PS3_AUDIO_IOID; ret = ps3_dma_region_create(dev->d_region); -- 2.25.0

4 11

imx8mm fsl_sai clock config failing
by Tim Harvey 19 May '20

19 May '20

Greetings, I'm trying to get imx8mm sai working with a tlv320aic3x codec on a new board and am finding that the sai3 bus clock is getting derived from the wrong source leading hw_params() to fail with 'fsl-sai 30030000.sai: failed to derive required Tx rate: 3072000' In comparison to the imx8mm-evk I find it's clock gets configured as desired yet I have the same device-tree configuration for sai3. Here is my board's dts: / { ... sound { compatible = "simple-audio-card"; simple-audio-card,name = "tlv320-audio"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&cpudai>; simple-audio-card,bitclock-master = <&cpudai>; simple-audio-card,widgets = "Line", "Left Line Out Jack", "Line", "Right Line Out Jack"; simple-audio-card,routing = "Left Line Out Jack", "LLOUT", "Right Line Out Jack", "RLOUT"; cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; simple-audio-card,codec { sound-dai = <&tlv320aic3105>; clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; }; }; }; &i2c2 { ... tlv320aic3105: codec@18 { #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tlv>; compatible = "ti,tlv320aic3x"; reg = <0x18>; reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ /* Regulators */ DRVDD-supply = <&reg_3p3v>; AVDD-supply = <&reg_3p3v>; IOVDD-supply = <&reg_3p3v>; DVDD-supply = <&reg_1p8v>; }; } &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; assigned-clocks = <&clk IMX8MM_CLK_SAI3>; assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; status = "okay"; }; and /sys/kernel/debug/clk/clk_summary from my board: osc_24m 7 10 0 24000000 0 0 50000 ... audio_pll1_ref_sel 0 0 0 24000000 0 0 50000 audio_pll1 0 0 0 650000000 0 0 50000 audio_pll1_bypass 0 0 0 650000000 0 0 50000 audio_pll1_out 0 0 0 650000000 0 0 50000 sai3 0 0 0 25000000 0 0 50000 sai3_root_clk 0 0 0 25000000 0 0 50000 ^^^^ note 25000000 instead of requested 24576000 And Here is the imx8mm-evk dts: / { ... wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_wlf>; wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; }; sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&cpudai>; simple-audio-card,bitclock-master = <&cpudai>; simple-audio-card,widgets = "Line", "Left Line Out Jack", "Line", "Right Line Out Jack"; simple-audio-card,routing = "Left Line Out Jack", "LINEVOUTL", "Right Line Out Jack", "LINEVOUTR"; cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; simple-audio-card,codec { sound-dai = <&wm8524>; clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; }; }; }; &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; assigned-clocks = <&clk IMX8MM_CLK_SAI3>; assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; status = "okay"; }; and /sys/kernel/debug/clk/clk_summary from imx8mm_evk: osc_24m 7 10 0 24000000 0 0 50000 ... audio_pll1_ref_sel 0 0 0 24000000 0 0 50000 audio_pll1 0 0 0 393215995 0 0 50000 audio_pll1_bypass 0 0 0 393215995 0 0 50000 audio_pll1_out 0 0 0 393215995 0 0 50000 sai3 0 0 0 24576000 0 0 50000 sai3_root_clk 0 0 0 24576000 0 0 50000 ^^^^ note 24576000 as requested Any ideas what I'm doing wrong here? Note that even though the imx8mm-evk appears to configure its clock correctly I still have not been able to play audio out the wm8524 and the system appears to hang during playback as if BCLK/MCLK were not clocking. Perhaps there is something not supported yet upstream with regards to IMX8MM SAI? Best Regards, Tim

3 3

[PATCH 1/3] ASoC: amd: fix kernel warning
by Vijendar Mukunda 19 May '20

19 May '20

Removed unused variable from code to fix the kernel warning. Reported-by: kbuild test robot <lkp(a)intel.com> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/renoir/acp3x-pdm-dma.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/amd/renoir/acp3x-pdm-dma.c b/sound/soc/amd/renoir/acp3x-pdm-dma.c index 942010021319..b33c7aec7481 100644 --- a/sound/soc/amd/renoir/acp3x-pdm-dma.c +++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c @@ -150,12 +150,11 @@ static int start_pdm_dma(void __iomem *acp_base) static int stop_pdm_dma(void __iomem *acp_base) { - u32 pdm_enable, pdm_dma_enable, pdm_fifo_flush; + u32 pdm_enable, pdm_dma_enable; int timeout; pdm_enable = 0x00; pdm_dma_enable = 0x00; - pdm_fifo_flush = 0x00; pdm_enable = rn_readl(acp_base + ACP_WOV_PDM_ENABLE); pdm_dma_enable = rn_readl(acp_base + ACP_WOV_PDM_DMA_ENABLE); -- 2.26.2

2 3

[PATCH 1/3] pcm: dmix: fix incorrect boundary handling in snd_pcm_dmix_sync_area
by Maarten Baert 19 May '20

19 May '20

The available size calculation did not handle wraparound correctly. Also, the underrun handling code confused slave_buffer_size with slave_boundary, causing another integer overflow that results in too many samples being skipped. Signed-off-by: Maarten Baert <maarten-baert(a)hotmail.com> --- src/pcm/pcm_dmix.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/src/pcm/pcm_dmix.c b/src/pcm/pcm_dmix.c index 843fa316..b5fdb240 100644 --- a/src/pcm/pcm_dmix.c +++ b/src/pcm/pcm_dmix.c @@ -315,11 +315,12 @@ static void snd_pcm_dmix_sync_area(snd_pcm_t *pcm) /* check the available size in the local buffer * last_appl_ptr keeps the last updated position */ - size = dmix->appl_ptr - dmix->last_appl_ptr; + if (dmix->appl_ptr >= dmix->last_appl_ptr) + size = dmix->appl_ptr - dmix->last_appl_ptr; + else + size = dmix->appl_ptr + (pcm->boundary - dmix->last_appl_ptr); if (! size) return; - if (size >= pcm->boundary / 2) - size = pcm->boundary - size; /* the slave_app_ptr can be far behind the slave_hw_ptr */ /* reduce mixing and errors here - just skip not catched writes */ @@ -328,18 +329,19 @@ static void snd_pcm_dmix_sync_area(snd_pcm_t *pcm) else slave_size = dmix->slave_appl_ptr + (dmix->slave_boundary - dmix->slave_hw_ptr); if (slave_size > dmix->slave_buffer_size) { - transfer = dmix->slave_buffer_size - slave_size; + transfer = dmix->slave_boundary - slave_size; if (transfer > size) transfer = size; dmix->last_appl_ptr += transfer; dmix->last_appl_ptr %= pcm->boundary; dmix->slave_appl_ptr += transfer; dmix->slave_appl_ptr %= dmix->slave_boundary; - size = dmix->appl_ptr - dmix->last_appl_ptr; + if (dmix->appl_ptr >= dmix->last_appl_ptr) + size = dmix->appl_ptr - dmix->last_appl_ptr; + else + size = dmix->appl_ptr + (pcm->boundary - dmix->last_appl_ptr); if (! size) return; - if (size >= pcm->boundary / 2) - size = pcm->boundary - size; } /* check the available size in the slave PCM buffer */ -- 2.26.2

1 1

[PATCH] firewire: Remove function callback casts
by Oscar Carter 19 May '20

19 May '20

In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, remove all the function callback casts. To do this, modify the "fw_iso_context_create" function prototype adding a new parameter for the multichannel callback. Also, fix all the function calls accordingly. Signed-off-by: Oscar Carter <oscar.carter(a)gmx.com> --- drivers/firewire/core-cdev.c | 12 +++++++----- drivers/firewire/core-iso.c | 10 ++++++++-- drivers/firewire/net.c | 2 +- drivers/media/firewire/firedtv-fw.c | 3 ++- include/linux/firewire.h | 3 ++- sound/firewire/amdtp-stream.c | 2 +- sound/firewire/isight.c | 4 ++-- 7 files changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 6e291d8f3a27..cc368b35be2e 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -957,7 +957,8 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) { struct fw_cdev_create_iso_context *a = &arg->create_iso_context; struct fw_iso_context *context; - fw_iso_callback_t cb; + fw_iso_callback_t cb_sc = NULL; + fw_iso_mc_callback_t cb_mc = NULL; int ret; BUILD_BUG_ON(FW_CDEV_ISO_CONTEXT_TRANSMIT != FW_ISO_CONTEXT_TRANSMIT || @@ -970,7 +971,7 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) if (a->speed > SCODE_3200 || a->channel > 63) return -EINVAL; - cb = iso_callback; + cb_sc = iso_callback; break; case FW_ISO_CONTEXT_RECEIVE: @@ -978,11 +979,11 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) a->channel > 63) return -EINVAL; - cb = iso_callback; + cb_sc = iso_callback; break; case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: - cb = (fw_iso_callback_t)iso_mc_callback; + cb_mc = iso_mc_callback; break; default: @@ -990,7 +991,8 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg) } context = fw_iso_context_create(client->device->card, a->type, - a->channel, a->speed, a->header_size, cb, client); + a->channel, a->speed, a->header_size, cb_sc, cb_mc, + client); if (IS_ERR(context)) return PTR_ERR(context); if (client->version < FW_CDEV_VERSION_AUTO_FLUSH_ISO_OVERFLOW) diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 185b0b78b3d6..3b8e349704f8 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -131,7 +131,8 @@ size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed) struct fw_iso_context *fw_iso_context_create(struct fw_card *card, int type, int channel, int speed, size_t header_size, - fw_iso_callback_t callback, void *callback_data) + fw_iso_callback_t cb_sc, fw_iso_mc_callback_t cb_mc, + void *callback_data) { struct fw_iso_context *ctx; @@ -145,7 +146,12 @@ struct fw_iso_context *fw_iso_context_create(struct fw_card *card, ctx->channel = channel; ctx->speed = speed; ctx->header_size = header_size; - ctx->callback.sc = callback; + + if (cb_sc) + ctx->callback.sc = cb_sc; + else + ctx->callback.mc = cb_mc; + ctx->callback_data = callback_data; return ctx; diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 715e491dfbc3..c5cc0a311aa0 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -1136,7 +1136,7 @@ static int fwnet_broadcast_start(struct fwnet_device *dev) context = fw_iso_context_create(dev->card, FW_ISO_CONTEXT_RECEIVE, IEEE1394_BROADCAST_CHANNEL, dev->card->link_speed, 8, - fwnet_receive_broadcast, dev); + fwnet_receive_broadcast, NULL, dev); if (IS_ERR(context)) { retval = PTR_ERR(context); goto failed; diff --git a/drivers/media/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c index 97144734eb05..d2940adefd8c 100644 --- a/drivers/media/firewire/firedtv-fw.c +++ b/drivers/media/firewire/firedtv-fw.c @@ -141,7 +141,8 @@ int fdtv_start_iso(struct firedtv *fdtv) ctx->context = fw_iso_context_create(device->card, FW_ISO_CONTEXT_RECEIVE, fdtv->isochannel, - device->max_speed, ISO_HEADER_SIZE, handle_iso, fdtv); + device->max_speed, ISO_HEADER_SIZE, + handle_iso, NULL, fdtv); if (IS_ERR(ctx->context)) { err = PTR_ERR(ctx->context); goto fail_free; diff --git a/include/linux/firewire.h b/include/linux/firewire.h index aec8f30ab200..3a0b5e18e140 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -452,7 +452,8 @@ struct fw_iso_context { struct fw_iso_context *fw_iso_context_create(struct fw_card *card, int type, int channel, int speed, size_t header_size, - fw_iso_callback_t callback, void *callback_data); + fw_iso_callback_t cb_sc, fw_iso_mc_callback_t cb_mc, + void *callback_data); int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels); int fw_iso_context_queue(struct fw_iso_context *ctx, struct fw_iso_packet *packet, diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index 37d38efb4c87..8629ab3e2c64 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -1093,7 +1093,7 @@ static int amdtp_stream_start(struct amdtp_stream *s, int channel, int speed, s->context = fw_iso_context_create(fw_parent_device(s->unit)->card, type, channel, speed, ctx_header_size, - ctx_cb, ctx_data); + ctx_cb, NULL, ctx_data); if (IS_ERR(s->context)) { err = PTR_ERR(s->context); if (err == -EBUSY) diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c index 6655af53b367..51cc37fca736 100644 --- a/sound/firewire/isight.c +++ b/sound/firewire/isight.c @@ -361,8 +361,8 @@ static int isight_start_streaming(struct isight *isight) isight->context = fw_iso_context_create(isight->device->card, FW_ISO_CONTEXT_RECEIVE, isight->resources.channel, - isight->device->max_speed, - 4, isight_packet, isight); + isight->device->max_speed, 4, + isight_packet, NULL, isight); if (IS_ERR(isight->context)) { err = PTR_ERR(isight->context); isight->context = NULL; -- 2.20.1

2 2

[PATCH v3 00/14] Add Renoir ACP driver
by Vijendar Mukunda 19 May '20

19 May '20

This adds an ASoC driver for the ACP (Audio CoProcessor) block on AMD Renoir APUs. V3: - Changed PCI driver PM runtime sequence - Removed redundant code in Renoir machine driver V2: - Removed empty declaration of dai_ops - Removed SNDRV_PCM_INFO_BATCH flag - Defined Macros for delay and counter and corrected dma stop sequence. - Changed PCI driver pm runtime sequence - Removed redundant code Vijendar Mukunda (14): ASoC: amd: add Renoir ACP3x IP register header ASoC: amd: add Renoir ACP PCI driver ASoC: amd: add acp init/de-init functions ASoC: amd: create acp3x pdm platform device ASoC: amd: add ACP3x PDM platform driver ASoC: amd: irq handler changes for ACP3x PDM dma driver ASoC: amd: add acp3x pdm driver dma ops ASoC: amd: add ACP PDM DMA driver dai ops ASoC: amd: add Renoir ACP PCI driver PM ops ASoC: amd: add ACP PDM DMA driver pm ops ASoC: amd: enable Renoir acp3x drivers build ASoC: amd: create platform devices for Renoir ASoC: amd: RN machine driver using dmic ASoC: amd: enable build for RN machine driver sound/soc/amd/Kconfig | 13 + sound/soc/amd/Makefile | 1 + sound/soc/amd/renoir/Makefile | 7 + sound/soc/amd/renoir/acp3x-pdm-dma.c | 530 +++++++++++++++++++++ sound/soc/amd/renoir/acp3x-rn.c | 77 +++ sound/soc/amd/renoir/rn-pci-acp3x.c | 344 +++++++++++++ sound/soc/amd/renoir/rn_acp3x.h | 88 ++++ sound/soc/amd/renoir/rn_chip_offset_byte.h | 349 ++++++++++++++ 8 files changed, 1409 insertions(+) create mode 100644 sound/soc/amd/renoir/Makefile create mode 100644 sound/soc/amd/renoir/acp3x-pdm-dma.c create mode 100644 sound/soc/amd/renoir/acp3x-rn.c create mode 100644 sound/soc/amd/renoir/rn-pci-acp3x.c create mode 100644 sound/soc/amd/renoir/rn_acp3x.h create mode 100644 sound/soc/amd/renoir/rn_chip_offset_byte.h -- 2.26.2

5 32

[PATCH] pcm: dmix: fix incorrect boundary handling in snd_pcm_dmix_sync_area
by Maarten Baert 19 May '20

19 May '20

The available size calculation did not handle wraparound correctly. Also, the underrun handling code confused slave_buffer_size with slave_boundary, causing another integer overflow that results in too many samples being skipped. Signed-off-by: Maarten Baert <maarten-baert(a)hotmail.com> --- src/pcm/pcm_dmix.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/src/pcm/pcm_dmix.c b/src/pcm/pcm_dmix.c index 843fa316..b5fdb240 100644 --- a/src/pcm/pcm_dmix.c +++ b/src/pcm/pcm_dmix.c @@ -315,11 +315,12 @@ static void snd_pcm_dmix_sync_area(snd_pcm_t *pcm) /* check the available size in the local buffer * last_appl_ptr keeps the last updated position */ - size = dmix->appl_ptr - dmix->last_appl_ptr; + if (dmix->appl_ptr >= dmix->last_appl_ptr) + size = dmix->appl_ptr - dmix->last_appl_ptr; + else + size = dmix->appl_ptr + (pcm->boundary - dmix->last_appl_ptr); if (! size) return; - if (size >= pcm->boundary / 2) - size = pcm->boundary - size; /* the slave_app_ptr can be far behind the slave_hw_ptr */ /* reduce mixing and errors here - just skip not catched writes */ @@ -328,18 +329,19 @@ static void snd_pcm_dmix_sync_area(snd_pcm_t *pcm) else slave_size = dmix->slave_appl_ptr + (dmix->slave_boundary - dmix->slave_hw_ptr); if (slave_size > dmix->slave_buffer_size) { - transfer = dmix->slave_buffer_size - slave_size; + transfer = dmix->slave_boundary - slave_size; if (transfer > size) transfer = size; dmix->last_appl_ptr += transfer; dmix->last_appl_ptr %= pcm->boundary; dmix->slave_appl_ptr += transfer; dmix->slave_appl_ptr %= dmix->slave_boundary; - size = dmix->appl_ptr - dmix->last_appl_ptr; + if (dmix->appl_ptr >= dmix->last_appl_ptr) + size = dmix->appl_ptr - dmix->last_appl_ptr; + else + size = dmix->appl_ptr + (pcm->boundary - dmix->last_appl_ptr); if (! size) return; - if (size >= pcm->boundary / 2) - size = pcm->boundary - size; } /* check the available size in the slave PCM buffer */ -- 2.26.2

2 1

[PATCH 1/2] ASoC: fsl_micfil: Remove unneeded ifdef's
by Fabio Estevam 19 May '20

19 May '20

There is no need to use ifdef's around the power managament related functions, as they are already using the __maybe_unused notation. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- sound/soc/fsl/fsl_micfil.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index e73bd6570a08..1c51bd720e6b 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -753,7 +753,6 @@ static int fsl_micfil_probe(struct platform_device *pdev) return ret; } -#ifdef CONFIG_PM static int __maybe_unused fsl_micfil_runtime_suspend(struct device *dev) { struct fsl_micfil *micfil = dev_get_drvdata(dev); @@ -780,9 +779,7 @@ static int __maybe_unused fsl_micfil_runtime_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM*/ -#ifdef CONFIG_PM_SLEEP static int __maybe_unused fsl_micfil_suspend(struct device *dev) { pm_runtime_force_suspend(dev); @@ -796,7 +793,6 @@ static int __maybe_unused fsl_micfil_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops fsl_micfil_pm_ops = { SET_RUNTIME_PM_OPS(fsl_micfil_runtime_suspend, -- 2.17.1

2 2

[PATCH] ASoC: fsl_asrc: Set ASR76K and ASR56K based on processing clock
by Shengjiu Wang 19 May '20

19 May '20

The processing clock is different for platforms, so it is better to set ASR76K and ASR56K based on processing clock, rather than hard coding the value for them. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> Signed-off-by: Mihai Serban <mihai.serban(a)nxp.com> --- sound/soc/fsl/fsl_asrc.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 067a54ab554f..ca926915068f 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -858,6 +858,8 @@ static const struct regmap_config fsl_asrc_regmap_config = { */ static int fsl_asrc_init(struct fsl_asrc *asrc) { + unsigned long ipg_rate; + /* Halt ASRC internal FP when input FIFO needs data for pair A, B, C */ regmap_write(asrc->regmap, REG_ASRCTR, ASRCTR_ASRCEN); @@ -875,11 +877,14 @@ static int fsl_asrc_init(struct fsl_asrc *asrc) regmap_update_bits(asrc->regmap, REG_ASRTFR1, ASRTFR1_TF_BASE_MASK, ASRTFR1_TF_BASE(0xfc)); - /* Set the processing clock for 76KHz to 133M */ - regmap_write(asrc->regmap, REG_ASR76K, 0x06D6); - - /* Set the processing clock for 56KHz to 133M */ - return regmap_write(asrc->regmap, REG_ASR56K, 0x0947); + /* + * Set the period of the 76KHz and 56KHz sampling clocks based on + * the ASRC processing clock. + * On iMX6, ipg_clk = 133MHz, REG_ASR76K = 0x06D6, REG_ASR56K = 0x0947 + */ + ipg_rate = clk_get_rate(asrc->ipg_clk); + regmap_write(asrc->regmap, REG_ASR76K, ipg_rate / 76000); + return regmap_write(asrc->regmap, REG_ASR56K, ipg_rate / 56000); } /** -- 2.21.0

2 1

[PATCH v2 0/5] soundwire: bus_type: add sdw_master_device support
by Bard Liao 19 May '20

19 May '20

This series adds sdw master devices support. changes in v2: - Allocate sdw_master_device dynamically - Use unique bus id as master id - Keep checking parent devices - Enable runtime_pm on Master device Bard Liao (2): soundwire: bus: add unique bus id soundwire: master: add runtime pm support Pierre-Louis Bossart (3): soundwire: bus: rename sdw_bus_master_add/delete, add arguments soundwire: bus_type: introduce sdw_slave_type and sdw_master_type soundwire: bus_type: add sdw_master_device support .../driver-api/soundwire/summary.rst | 7 +- drivers/soundwire/Makefile | 2 +- drivers/soundwire/bus.c | 47 ++++++++-- drivers/soundwire/bus.h | 3 + drivers/soundwire/bus_type.c | 19 ++-- drivers/soundwire/intel.c | 9 +- drivers/soundwire/master.c | 88 +++++++++++++++++++ drivers/soundwire/qcom.c | 7 +- drivers/soundwire/slave.c | 8 +- include/linux/soundwire/sdw.h | 24 ++++- include/linux/soundwire/sdw_type.h | 9 +- 11 files changed, 191 insertions(+), 32 deletions(-) create mode 100644 drivers/soundwire/master.c -- 2.17.1

3 7

Re: 回覆: CLEVO uses the model name and SSID list of Realtek audio CODEC ALC1220
by Takashi Iwai 19 May '20

19 May '20

On Mon, 18 May 2020 11:13:48 +0200, Pshou wrote: > > Hi Takash: > > I have added the "Signed-off-by" line. > Can you see if you can? > > Signed-off-by: Pshou <pshou(a)realtek.com> We need a real full name here to Signed-off-by line. It's a legal requirement. Could you fill it and resend? thanks, Takashi > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > Best regards > Pshou > > -----原始郵件----- > 寄件者: Takashi Iwai <tiwai(a)suse.de> > 寄件日期: 2020年5月15日 17:45 > 收件者: Pshou <pshou(a)realtek.com> > 副本: tiwai(a)suse.com; Kailang <kailang(a)realtek.com> > 主旨: Re: CLEVO uses the model name and SSID list of Realtek audio CODEC ALC1220 > > On Fri, 15 May 2020 11:24:45 +0200, > Pshou wrote: > > > > Hi Takashi: > > > > Can you help me add some source code to patch_realtek.c? > > > > Add some CLEVO SSID in the alc1220. > > > > SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", > > ALC1220_FIXUP_CLEVO_PB51ED_PINS), > > > > + SND_PCI_QUIRK(0x1558, 0x50d3, "Clevo PC50[ER][CDF]", > > ALC1220_FIXUP_CLEVO_PB51ED_PINS), > > > > + SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", > > ALC1220_FIXUP_CLEVO_PB51ED_PINS), > > > > + SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", > > ALC1220_FIXUP_CLEVO_PB51ED_PINS), > > > > SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), > > Sure, could you give your Signed-off-by line, so that I can rearrange, submit to alsa-devel and merge to upstream? > > > thanks, > > Takashi > > ------Please consider the environment before printing this e-mail. > [2 0001-Add-several-Clevo-SSID-in-the-ALC1220.patch <application/octet-stream (base64)>] >

2 2

[PATCH] ALSA: hda/realtek - Add more fixup entries for Clevo machines
by Takashi Iwai 19 May '20

19 May '20

From: PeiSen Hou <pshou(a)realtek.com> A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need the existing quirk for pins for PB51 and co. Signed-off-by: PeiSen Hou <pshou(a)realtek.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 23315b69ac38..041d2a32059b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2473,6 +2473,9 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x97e1, "Clevo P970[ER][CDFN]", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x65d1, "Clevo PB51[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x50d3, "Clevo PC50[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530), -- 2.16.4

1 0

[RESEND][PATCH] sound: qcom: Kconfig: Tweak dependencies on SND_SOC_SDM845
by John Stultz 19 May '20

19 May '20

CROS_EC isn't strictly required for audio to work on other SDM845 platforms (like the Dragonboard 845c). So lets remove the dependency and select the related CROS_EC options if CROS_EC is already enabled. Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Cc: Rohit kumar <rohitkr(a)codeaurora.org> Cc: Patrick Lai <plai(a)codeaurora.org> Cc: Banajit Goswami <bgoswami(a)codeaurora.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org Signed-off-by: John Stultz <john.stultz(a)linaro.org> --- sound/soc/qcom/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index f51b28d1b94d..0434f2c7d746 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -99,12 +99,12 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" - depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE + depends on QCOM_APR && I2C && SOUNDWIRE select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON select SND_SOC_RT5663 select SND_SOC_MAX98927 - select SND_SOC_CROS_EC_CODEC + select SND_SOC_CROS_EC_CODEC if CROS_EC help To add support for audio on Qualcomm Technologies Inc. SDM845 SoC-based systems. -- 2.17.1

1 0

[PATCH 0/7] ASoC: add soc-link
by Kuninori Morimoto 19 May '20

19 May '20

Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This patch-set creates new snd_soc_link_xxx() functions which handle dai_link related operation, and implmement these at new soc-link.c. Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 30 ++++++++ include/sound/soc.h | 1 + sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 45 ++++-------- sound/soc/soc-core.c | 17 +++-- sound/soc/soc-dai.c | 8 +-- sound/soc/soc-link.c | 149 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 8 files changed, 220 insertions(+), 118 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1

2 13

[PATCH] ALSA: iec1712: Initialize STDSP24 properly when using the model=staudio option
by Takashi Iwai 18 May '20

18 May '20

From: Scott Bahling <sbahling(a)suse.com> The ST Audio ADCIII is an STDSP24 card plus extension box. With commit e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we enabled the ADCIII ports using the model=staudio option but forgot this part to ensure the STDSP24 card is initialized properly. Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") Signed-off-by: Scott Bahling <sbahling(a)suse.com> Cc: <stable(a)vger.kernel.org> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/ice1712/ice1712.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 884d0cdec08c..73e1e5400506 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -2332,7 +2332,8 @@ static int snd_ice1712_chip_init(struct snd_ice1712 *ice) pci_write_config_byte(ice->pci, 0x61, ice->eeprom.data[ICE_EEP1_ACLINK]); pci_write_config_byte(ice->pci, 0x62, ice->eeprom.data[ICE_EEP1_I2SID]); pci_write_config_byte(ice->pci, 0x63, ice->eeprom.data[ICE_EEP1_SPDIF]); - if (ice->eeprom.subvendor != ICE1712_SUBDEVICE_STDSP24) { + if (ice->eeprom.subvendor != ICE1712_SUBDEVICE_STDSP24 && + ice->eeprom.subvendor != ICE1712_SUBDEVICE_STAUDIO_ADCIII) { ice->gpio.write_mask = ice->eeprom.gpiomask; ice->gpio.direction = ice->eeprom.gpiodir; snd_ice1712_write(ice, ICE1712_IREG_GPIO_WRITE_MASK, -- 2.16.4

1 0

[PATCH] ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet
by Hans de Goede 18 May '20

18 May '20

The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low). Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 08f4ae964b02..fbfd53874b47 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -742,6 +742,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Toshiba Encore WT8-A */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), -- 2.26.2

3 2

[PATCH] ASoC: max9867: fix volume controls
by Pavel Dobias 18 May '20

18 May '20

The xmax values for Master Playback Volume and Mic Boost Capture Volume are specified incorrectly (one greater) which results in the wrong dB gain being shown to the user in the case of Master Playback Volume. Signed-off-by: Pavel Dobias <dobias(a)2n.cz> --- sound/soc/codecs/max9867.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/max9867.c b/sound/soc/codecs/max9867.c index 8600c5439e1e..2e4aa23b5a60 100644 --- a/sound/soc/codecs/max9867.c +++ b/sound/soc/codecs/max9867.c @@ -46,13 +46,13 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(max9867_micboost_tlv, static const struct snd_kcontrol_new max9867_snd_controls[] = { SOC_DOUBLE_R_TLV("Master Playback Volume", MAX9867_LEFTVOL, - MAX9867_RIGHTVOL, 0, 41, 1, max9867_master_tlv), + MAX9867_RIGHTVOL, 0, 40, 1, max9867_master_tlv), SOC_DOUBLE_R_TLV("Line Capture Volume", MAX9867_LEFTLINELVL, MAX9867_RIGHTLINELVL, 0, 15, 1, max9867_line_tlv), SOC_DOUBLE_R_TLV("Mic Capture Volume", MAX9867_LEFTMICGAIN, MAX9867_RIGHTMICGAIN, 0, 20, 1, max9867_mic_tlv), SOC_DOUBLE_R_TLV("Mic Boost Capture Volume", MAX9867_LEFTMICGAIN, - MAX9867_RIGHTMICGAIN, 5, 4, 0, max9867_micboost_tlv), + MAX9867_RIGHTMICGAIN, 5, 3, 0, max9867_micboost_tlv), SOC_SINGLE("Digital Sidetone Volume", MAX9867_SIDETONE, 0, 31, 1), SOC_SINGLE_TLV("Digital Playback Volume", MAX9867_DACLEVEL, 0, 15, 1, max9867_dac_tlv), -- 2.20.1

2 1

[PATCH 0/5] ASoC: Intel: minor fixes to machine drivers
by Pierre-Louis Bossart 18 May '20

18 May '20

Minor button remap changes, inspired by recent Chromebook patches, typo in component string reported by Jaroslav and driver name change not submitted in last wm8804 contribution. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: change machine driver name for WM8804 platforms ASoC: Intel: sof_sdw: fix typo in components string ASoC: Intel: sof_sdw_rt711: remap buttons ASoC: Intel: sof_sdw_rt700: remap buttons ASoC: Intel: cht_bsw_nau8824: remap BTN_0 as KEY_PLAYPAUSE sound/soc/intel/boards/cht_bsw_nau8824.c | 4 ++-- sound/soc/intel/boards/sof_sdw.c | 2 +- sound/soc/intel/boards/sof_sdw_rt700.c | 8 ++++---- sound/soc/intel/boards/sof_sdw_rt711.c | 8 ++++---- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 2 +- 5 files changed, 12 insertions(+), 12 deletions(-) base-commit: d731c1a0f935dbebf4a851e072f8c7309eb2b8c5 -- 2.20.1

2 6

[PATCH] ASoC: fsl_micfil: Fix unused assignment in fsl_set_clock_params()
by Tang Bin 18 May '20

18 May '20

Delete unused initialized value of 'ret', because it will be assigned by the function fsl_micfil_set_mclk_rate(). Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/fsl/fsl_micfil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 79cf488fa..a7a6118be 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -295,7 +295,7 @@ static int fsl_set_clock_params(struct device *dev, unsigned int rate) { struct fsl_micfil *micfil = dev_get_drvdata(dev); int clk_div; - int ret = 0; + int ret; ret = fsl_micfil_set_mclk_rate(micfil, rate); if (ret < 0) -- 2.20.1.windows.1

2 1

[PATCH 0/3] ASoC: codecs: rt*-sdw: memory leaks and simplifications
by Pierre-Louis Bossart 18 May '20

18 May '20

While debugging unrelated memory corruption errors, I detected issues related to the interaction with the SoundWire and ASoC cores, here are 3 small patches to fix all this. Pierre-Louis Bossart (3): ASoC: codecs: rt*-sdw: don't assign slave_ops ASoC: codecs: rt*-sdw: fix memory leak in set_sdw_stream() ASoC: codecs: rt1308-sdw: remove duplicate allocation sound/soc/codecs/rt1308-sdw.c | 11 +++-------- sound/soc/codecs/rt5682-sdw.c | 3 --- sound/soc/codecs/rt5682.c | 3 +++ sound/soc/codecs/rt700-sdw.c | 3 --- sound/soc/codecs/rt700.c | 3 +++ sound/soc/codecs/rt711-sdw.c | 3 --- sound/soc/codecs/rt711.c | 3 +++ sound/soc/codecs/rt715-sdw.c | 3 --- sound/soc/codecs/rt715.c | 3 +++ 9 files changed, 15 insertions(+), 20 deletions(-) base-commit: d731c1a0f935dbebf4a851e072f8c7309eb2b8c5 -- 2.20.1

2 4

[PATCH] ASoC: fsl_micfil: Fix indentation to put on one line affected code
by Tang Bin 18 May '20

18 May '20

In the function fsl_micfil_startup(), the two lines of dev_err() can be shortened to one line. Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/fsl/fsl_micfil.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index f7f2d29f1..79cf488fa 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -217,8 +217,7 @@ static int fsl_micfil_startup(struct snd_pcm_substream *substream, struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); if (!micfil) { - dev_err(dai->dev, - "micfil dai priv_data not set\n"); + dev_err(dai->dev, "micfil dai priv_data not set\n"); return -EINVAL; } -- 2.20.1.windows.1

2 1

[PATCH v3 00/21] ASoC: cleanup DAI/Component activity
by Kuninori Morimoto 18 May '20

18 May '20

Hi Mark These are v3 of DAI/Component activity cleanup. This patch-set exchanges soc-dapm.c :: snd_soc_dai_link_event_xxx() behavior which updates dai->active but not cares other actives. But I think original code was wrong. So, I believe these works correctly, but maybe need some tests or deep review. v1 -> v2 - function naming "activity" -> "active" v2 -> v3 - macro -> inline function - added Reviewed-by from Ranjani, Acked-by from Peter Link: https://lore.kernel.org/r/875zd39frp.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87blmq9alx.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (21): ASoC: soc-pcm: replace snd_soc_runtime_activate()/deactivate() to macro ASoC: soc-dai: add snd_soc_dai_action() ASoC: soc-dapm: use snd_soc_dai_activate()/deactivate() ASoC: soc-dai: add snd_soc_dai_active() ASoC: soc-component: add snd_soc_component_active() ASoC: soc-dai: add snd_soc_dai_stream_active() ASoC: use snd_soc_xxx_active() ASoC: atomel: use snd_soc_xxx_active() ASoC: bcm: use snd_soc_xxx_active() ASoC: cirrus: use snd_soc_xxx_active() ASoC: codecs: use snd_soc_xxx_active() ASoC: fsl: use snd_soc_xxx_active() ASoC: intel: use snd_soc_xxx_active() ASoC: jz4740: use snd_soc_xxx_active() ASoC: mediatek: use snd_soc_xxx_active() ASoC: meson: use snd_soc_xxx_active() ASoC: pxa: use snd_soc_xxx_active() ASoC: ti: use snd_soc_xxx_active() ASoC: uniphier: use snd_soc_xxx_active() ASoC: dwc: use snd_soc_xxx_active() ASoC: cleanup dai / component active code include/sound/soc-component.h | 6 +- include/sound/soc-dai.h | 21 +++++- include/sound/soc.h | 15 ++++- sound/soc/atmel/atmel_ssc_dai.c | 4 +- sound/soc/bcm/bcm2835-i2s.c | 6 +- sound/soc/bcm/cygnus-ssp.c | 4 +- sound/soc/cirrus/ep93xx-i2s.c | 4 +- sound/soc/codecs/adav80x.c | 4 +- sound/soc/codecs/arizona.c | 2 +- sound/soc/codecs/cs4271.c | 4 +- sound/soc/codecs/madera.c | 2 +- sound/soc/codecs/max98090.c | 6 +- sound/soc/codecs/tlv320aic23.c | 2 +- sound/soc/codecs/tlv320dac33.c | 2 +- sound/soc/codecs/uda1380.c | 2 +- sound/soc/codecs/wl1273.c | 2 +- sound/soc/codecs/wm8711.c | 2 +- sound/soc/codecs/wm8753.c | 4 +- sound/soc/dwc/dwc-i2s.c | 2 +- sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_spdif.c | 4 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 14 ++-- sound/soc/jz4740/jz4740-i2s.c | 8 +-- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 8 +-- sound/soc/meson/axg-tdm-interface.c | 2 +- sound/soc/pxa/pxa-ssp.c | 8 +-- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/soc-compress.c | 4 +- sound/soc/soc-core.c | 11 +-- sound/soc/soc-dai.c | 23 +++++++ sound/soc/soc-dapm.c | 8 +-- sound/soc/soc-pcm.c | 70 +++++++------------- sound/soc/ti/davinci-mcasp.c | 2 +- sound/soc/ti/omap-dmic.c | 4 +- sound/soc/ti/omap-mcbsp.c | 4 +- sound/soc/ti/omap-mcpdm.c | 8 +-- sound/soc/uniphier/aio-cpu.c | 4 +- 37 files changed, 155 insertions(+), 125 deletions(-) -- 2.17.1

2 22

[PATCH] ASoC: amd: raven: Make the driver name consistent across files
by Akshu Agrawal 18 May '20

18 May '20

This fixes the issue of driver not getting auto loaded with MODULE_ALIAS. With this patch: $find /sys/devices -name modalias -print0 | xargs -0 grep -i acp3x /sys/devices/pci0000:00/0000:00:08.1/0000:03:00.5/acp3x_i2s_playcap.2/ modalias:platform:acp3x_i2s_playcap /sys/devices/pci0000:00/0000:00:08.1/0000:03:00.5/acp3x_i2s_playcap.0/ modalias:platform:acp3x_i2s_playcap /sys/devices/pci0000:00/0000:00:08.1/0000:03:00.5/acp3x_rv_i2s_dma.0/ modalias:platform:acp3x_rv_i2s_dma /sys/devices/pci0000:00/0000:00:08.1/0000:03:00.5/acp3x_i2s_playcap.1/ modalias:platform:acp3x_i2s_playcap Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- Resending the patch https://patchwork.kernel.org/patch/11355713/ sound/soc/amd/raven/acp3x-i2s.c | 6 +++--- sound/soc/amd/raven/acp3x-pcm-dma.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/raven/acp3x-i2s.c b/sound/soc/amd/raven/acp3x-i2s.c index f160d35a6832..a532e01a2622 100644 --- a/sound/soc/amd/raven/acp3x-i2s.c +++ b/sound/soc/amd/raven/acp3x-i2s.c @@ -15,7 +15,7 @@ #include "acp3x.h" -#define DRV_NAME "acp3x-i2s" +#define DRV_NAME "acp3x_i2s_playcap" static int acp3x_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) @@ -269,7 +269,7 @@ static struct snd_soc_dai_ops acp3x_i2s_dai_ops = { }; static const struct snd_soc_component_driver acp3x_dai_component = { - .name = "acp3x-i2s", + .name = DRV_NAME, }; static struct snd_soc_dai_driver acp3x_i2s_dai = { @@ -348,4 +348,4 @@ module_platform_driver(acp3x_dai_driver); MODULE_AUTHOR("Vishnuvardhanrao.Ravulapati(a)amd.com"); MODULE_DESCRIPTION("AMD ACP 3.x PCM Driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS("platform:"DRV_NAME); diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c index a36c5cb848cd..620b568bc414 100644 --- a/sound/soc/amd/raven/acp3x-pcm-dma.c +++ b/sound/soc/amd/raven/acp3x-pcm-dma.c @@ -15,7 +15,7 @@ #include "acp3x.h" -#define DRV_NAME "acp3x-i2s-audio" +#define DRV_NAME "acp3x_rv_i2s_dma" static const struct snd_pcm_hardware acp3x_pcm_hardware_playback = { .info = SNDRV_PCM_INFO_INTERLEAVED | @@ -542,4 +542,4 @@ MODULE_AUTHOR("Maruthi.Bayyavarapu(a)amd.com"); MODULE_AUTHOR("Vijendar.Mukunda(a)amd.com"); MODULE_DESCRIPTION("AMD ACP 3.x PCM Driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS("platform:"DRV_NAME); -- 2.17.1

2 1

[PATCH 0/8] ASoC: SOF: Intel and IMX updates for 5.8
by Kai Vehmanen 18 May '20

18 May '20

Hi, here's a series of minor fixes and improvements to SOF. Add support for smart amplifier component type. Cover more systems by relaxing match rules for the generic Soundwire machine driver. Fix issues with driver unload and address a few compiler warnings. Daniel Baluta (2): ASoC: SOF: Do nothing when DSP PM callbacks are not set ASoC: SOF: define INFO_ flags in dsp_ops Keyon Jie (1): ASoC: SOF: topology: add support to smart amplifier Marcin Rajwa (2): ASoC: SOF: add a power_down_notify method ASoC: SOF: inform DSP that driver is going to be removed Pierre-Louis Bossart (2): ASoC: SOF: imx: make dsp_ops static ASoC: SOF: imx: make imx8m_dsp_ops static randerwang (1): ASoC: SOF: Intel: sdw: relax sdw machine select constraints include/sound/sof/topology.h | 2 ++ sound/soc/sof/core.c | 6 ++++++ sound/soc/sof/imx/imx8.c | 2 +- sound/soc/sof/imx/imx8m.c | 8 +++++++- sound/soc/sof/intel/hda.c | 10 +++++++++- sound/soc/sof/pm.c | 19 +++++++++++++++++-- sound/soc/sof/sof-priv.h | 1 + sound/soc/sof/topology.c | 1 + 8 files changed, 44 insertions(+), 5 deletions(-) -- 2.26.0

2 9

[PATCH] ASoC: fsl_micfil: Fix format and unused assignment
by Tang Bin 18 May '20

18 May '20

In the function fsl_micfil_startup(), the two lines of dev_err() can be shortened to one line. And delete unused initialized value of 'ret', because it will be assigned by the function fsl_micfil_set_mclk_rate(). Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/fsl/fsl_micfil.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index f7f2d29f1..a7a6118be 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -217,8 +217,7 @@ static int fsl_micfil_startup(struct snd_pcm_substream *substream, struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); if (!micfil) { - dev_err(dai->dev, - "micfil dai priv_data not set\n"); + dev_err(dai->dev, "micfil dai priv_data not set\n"); return -EINVAL; } @@ -296,7 +295,7 @@ static int fsl_set_clock_params(struct device *dev, unsigned int rate) { struct fsl_micfil *micfil = dev_get_drvdata(dev); int clk_div; - int ret = 0; + int ret; ret = fsl_micfil_set_mclk_rate(micfil, rate); if (ret < 0) -- 2.20.1.windows.1

2 2

[PATCH 1/2] ASoC: topology: refine and log the header in the correct pass
by Keyon Jie 18 May '20

18 May '20

The check (tplg->pass == le32_to_cpu(hdr->type)) makes no sense as it is comparing two different enums, refine the element loading functions, and log the information when the header is being parsed in the corresponding parsing pass. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- sound/soc/soc-topology.c | 53 +++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 11 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 49875978a1ce..b3dae319c108 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -2636,6 +2636,17 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg, return ret; } +int (*elem_load[])(struct soc_tplg *, struct snd_soc_tplg_hdr *) = { + [SOC_TPLG_PASS_MANIFEST] = soc_tplg_manifest_load, + [SOC_TPLG_PASS_VENDOR] = soc_tplg_vendor_load, + [SOC_TPLG_PASS_MIXER] = soc_tplg_kcontrol_elems_load, + [SOC_TPLG_PASS_WIDGET] = soc_tplg_dapm_widget_elems_load, + [SOC_TPLG_PASS_PCM_DAI] = soc_tplg_pcm_elems_load, + [SOC_TPLG_PASS_GRAPH] = soc_tplg_dapm_graph_elems_load, + [SOC_TPLG_PASS_BE_DAI] = soc_tplg_dai_elems_load, + [SOC_TPLG_PASS_LINK] = soc_tplg_link_elems_load, +}; + /* validate header magic, size and type */ static int soc_valid_header(struct soc_tplg *tplg, struct snd_soc_tplg_hdr *hdr) @@ -2685,19 +2696,31 @@ static int soc_valid_header(struct soc_tplg *tplg, return -EINVAL; } - if (tplg->pass == le32_to_cpu(hdr->type)) + return 1; +} + +/* check and load the element for the current pass */ +static int soc_pass_load(struct soc_tplg *tplg, + struct snd_soc_tplg_hdr *hdr, + unsigned int hdr_pass) +{ + if (tplg->pass == hdr_pass) { dev_dbg(tplg->dev, "ASoC: Got 0x%x bytes of type %d version %d vendor %d at pass %d\n", hdr->payload_size, hdr->type, hdr->version, hdr->vendor_type, tplg->pass); + return elem_load[hdr_pass](tplg, hdr); + } - return 1; + return 0; } /* check header type and call appropriate handler */ static int soc_tplg_load_header(struct soc_tplg *tplg, struct snd_soc_tplg_hdr *hdr) { + unsigned int hdr_pass; + tplg->pos = tplg->hdr_pos + sizeof(struct snd_soc_tplg_hdr); /* check for matching ID */ @@ -2711,27 +2734,35 @@ static int soc_tplg_load_header(struct soc_tplg *tplg, case SND_SOC_TPLG_TYPE_MIXER: case SND_SOC_TPLG_TYPE_ENUM: case SND_SOC_TPLG_TYPE_BYTES: - return soc_tplg_kcontrol_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_MIXER; + break; case SND_SOC_TPLG_TYPE_DAPM_GRAPH: - return soc_tplg_dapm_graph_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_GRAPH; + break; case SND_SOC_TPLG_TYPE_DAPM_WIDGET: - return soc_tplg_dapm_widget_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_WIDGET; + break; case SND_SOC_TPLG_TYPE_PCM: - return soc_tplg_pcm_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_PCM_DAI; + break; case SND_SOC_TPLG_TYPE_DAI: - return soc_tplg_dai_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_BE_DAI; + break; case SND_SOC_TPLG_TYPE_DAI_LINK: case SND_SOC_TPLG_TYPE_BACKEND_LINK: /* physical link configurations */ - return soc_tplg_link_elems_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_LINK; + break; case SND_SOC_TPLG_TYPE_MANIFEST: - return soc_tplg_manifest_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_MANIFEST; + break; default: /* bespoke vendor data object */ - return soc_tplg_vendor_load(tplg, hdr); + hdr_pass = SOC_TPLG_PASS_VENDOR; + break; } - return 0; + return soc_pass_load(tplg, hdr, hdr_pass); } /* process the topology file headers */ -- 2.25.1

3 6

[PATCH 0/1] Fix silent output on Gigabyte X570 Aorus Xtreme
by Christian Lachner 18 May '20

18 May '20

The Gigabyte X570 Aorus Xtreme motherboard with ALC1220 codec requires a similar workaround for Clevo laptops to enforce the DAC/mixer connection path. This patch sets up a quirk entry for that. It was successfully tested by a user on BugZilla (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Christian Lachner (1): ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Xtreme sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) -- 2.26.2

2 2

[PATCH v2] ALSA: pcm: fix incorrect hw_base increase
by Brent Lu 18 May '20

18 May '20

There is a corner case that ALSA keeps increasing the hw_ptr but DMA already stop working/updating the position for a long time. In following log we can see the position returned from DMA driver does not move at all but the hw_ptr got increased at some point of time so snd_pcm_avail() will return a large number which seems to be a buffer underrun event from user space program point of view. The program thinks there is space in the buffer and fill more data. [ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368 [ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554 ... [ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362 [ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0 [ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368 This is because the hw_base will be increased by runtime->buffer_size frames unconditionally if the hw_ptr is not updated for over half of buffer time. As the hw_base increases, so does the hw_ptr increased by the same number. The avail value returned from snd_pcm_avail() could exceed the limit (buffer_size) easily becase the hw_ptr itself got increased by same buffer_size samples when the corner case happens. In following log, the buffer_size is 16368 samples but the avail is 21810 samples so CRAS server complains about it. [ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442 [ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810 cras_server[1907]: pcm_avail returned frames larger than buf_size: sof-glkda7219max: :0,5: 21810 > 16368 By updating runtime->hw_ptr_jiffies each time the HWSYNC is called, the hw_base will keep the same when buffer stall happens at long as the interval between each HWSYNC call is shorter than half of buffer time. Following is a log captured by a patched kernel. The hw_base/hw_ptr value is fixed in this corner case and user space program should be aware of the buffer stall and handle it. [ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368 [ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584 [ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488 [ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392 [ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0 ... [ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0 Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/core/pcm_lib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 872a852..d531e1b 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -433,6 +433,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, no_delta_check: if (runtime->status->hw_ptr == new_hw_ptr) { + runtime->hw_ptr_jiffies = curr_jiffies; update_audio_tstamp(substream, &curr_tstamp, &audio_tstamp); return 0; } -- 2.7.4

2 1

[PATCH] ALSA: pcm: fix incorrect hw_base increase
by Brent Lu 18 May '20

18 May '20

The hw_base will be increased by runtime->buffer_size frames unconditionally if the runtime->status->hw_ptr is not updated for over half of buffer time. As the hw_base increases, so does the runtime->status->hw_ptr which could lead to invalid return value when user space program calls snd_pcm_avail() function. By updating runtime->hw_ptr_jiffies each time the HWSYNC is called, the hw_base will keep the same when buffer stall happens, so does the hw_ptr. Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/core/pcm_lib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 872a852..d531e1b 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -433,6 +433,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, no_delta_check: if (runtime->status->hw_ptr == new_hw_ptr) { + runtime->hw_ptr_jiffies = curr_jiffies; update_audio_tstamp(substream, &curr_tstamp, &audio_tstamp); return 0; } -- 2.7.4

5 9

[RESEND][V5 PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 18 May '20

18 May '20

This is the initial amplifier driver for max98390. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changes since V4: * Revert return calibration status in max98390_dsm_calib_get: There is no need to return calibration status in get function because there is mixer control lock protecting mixer control access. And set function of DSM calib finishes calibration synchronously. * Fix sprintf in max98390_dsm_init func: Use snprintf to avoid any unreasonable value from DMI. Changes since V3: * Add operation at max98390_dsm_calib_get: Add cal_running variable at max98390_priv structure Add return cal_running at max98390_dsm_calib_get Update cal_running value during calibration * Update max98390_dsm_init func Add dsm_param bin name can select upon vendor and product name. Changes since V2: * Removed warn massage in max98390_dsm_calib_get func and add comment. Changes since V1: * Updated according to Mark's comments. * Updated according to Tzung-Bi's comments. * Removed Enum structure and use TLV data for Volume control sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1040 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 663 ++++++++++++++++++++++ 4 files changed, 1710 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..93f88cd9970a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..b9ce44dda886 --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1040 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max98390.c -- MAX98390 ALSA Soc Audio driver + * + * Copyright (C) 2020 Maxim Integrated Products + * + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_dbg(component->dev, + "Tdm mode : %d\n", max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static DECLARE_TLV_DB_SCALE(max98390_spk_tlv, 300, 300, 0); +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + ucontrol->value.integer.value[0] = rdc0 | rdc << 8; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* Do nothing */ + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98390_R203D_SPK_GAIN, + 0, 6, 0, + max98390_spk_tlv), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + char filename[128]; + const char *vendor, *product; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw; + char *dsm_param; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + if (vendor && product) { + snprintf(filename, sizeof(filename), "dsm_param_%s_%s.bin", + vendor, product); + } else { + sprintf(filename, "dsm_param.bin"); + } + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + ret = request_firmware(&fw, "dsm_param.bin", component->dev); + if (ret) + goto err; + } + + dev_dbg(component->dev, + "max98390: param fw size %ld\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + /* Update dsm bin param */ + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..f59cb114d957 --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,663 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d +#define THERMAL_COILTEMP_RD_BACK_BYTE1 0x239e +#define THERMAL_COILTEMP_RD_BACK_BYTE0 0x239f + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; +}; +#endif -- 2.17.1

2 1

[V5 PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 18 May '20

18 May '20

This is the initial amplifier driver for max98390. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changes since V4: * Revert return calibration status in max98390_dsm_calib_get: There is no need to return calibration status in get function because there is mixer control lock protecting mixer control access. And set function of DSM calib finishes calibration synchronously. * Fix sprintf in max98390_dsm_init func: Use snprintf to avoid any unreasonable value from DMI. Changes since V3: * Add operation at max98390_dsm_calib_get: Add cal_running variable at max98390_priv structure Add return cal_running at max98390_dsm_calib_get Update cal_running value during calibration * Update max98390_dsm_init func Add dsm_param bin name can select upon vendor and product name. Changes since V2: * Removed warn massage in max98390_dsm_calib_get func and add comment. Changes since V1: * Updated according to Mark's comments. * Updated according to Tzung-Bi's comments. * Removed Enum structure and use TLV data for Volume control sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1040 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 663 ++++++++++++++++++++++ 4 files changed, 1710 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..93f88cd9970a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..b9ce44dda886 --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1040 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max98390.c -- MAX98390 ALSA Soc Audio driver + * + * Copyright (C) 2020 Maxim Integrated Products + * + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_dbg(component->dev, + "Tdm mode : %d\n", max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static DECLARE_TLV_DB_SCALE(max98390_spk_tlv, 300, 300, 0); +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + ucontrol->value.integer.value[0] = rdc0 | rdc << 8; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* Do nothing */ + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98390_R203D_SPK_GAIN, + 0, 6, 0, + max98390_spk_tlv), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + char filename[128]; + const char *vendor, *product; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw; + char *dsm_param; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + if (vendor && product) { + snprintf(filename, sizeof(filename), "dsm_param_%s_%s.bin", + vendor, product); + } else { + sprintf(filename, "dsm_param.bin"); + } + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + ret = request_firmware(&fw, "dsm_param.bin", component->dev); + if (ret) + goto err; + } + + dev_dbg(component->dev, + "max98390: param fw size %ld\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + /* Update dsm bin param */ + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..f59cb114d957 --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,663 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d +#define THERMAL_COILTEMP_RD_BACK_BYTE1 0x239e +#define THERMAL_COILTEMP_RD_BACK_BYTE0 0x239f + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; +}; +#endif -- 2.17.1

3 3

no audio when using the dshare plugin with ALSA driver using indirect PCM data transfer
by GitHub issues - edited 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was edited from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon with WebUI](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. My _.asoundrc_ configuration is the following: ``` pcm.aes67 { type hw card 1 device 0 #sync_ptr_ioctl true } pcm_slave.nforce { pcm "aes67" channels 2 rate 48000 buffer_size 24576 period_size 48 format S24_3LE periods 0 period_time 1000 } pcm.ch12 { type dshare ipc_key 47110815 slave nforce bindings.0 0 bindings.1 1 #slowptr true } ``` Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D ch12 sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D ch12) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D ch12). I could fix the issue applying the following temporary fix to the **alsa-lib**: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the **alsa-lib** it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

no audio when using the dshare plugin with ALSA driver using indirect PCM data transfer
by GitHub issues - edited 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was edited from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon with WebUI](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. My _.asoundrc_ configuration is the following: ``` pcm.aes67 { type hw card 1 device 0 #sync_ptr_ioctl true } pcm_slave.nforce { pcm "aes67" channels 2 rate 48000 buffer_size 24576 period_size 48 format S24_3LE periods 0 period_time 1000 } pcm.ch12 { type dshare ipc_key 47110815 slave nforce bindings.0 0 bindings.1 1 #slowptr true } ``` Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D ch12 sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D ch12) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D ch12). I could fix the issue applying the following temporary fix to the `alsa-lib`: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the `alsa-lib` it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

no audio when using the dshare plugin with ALSA driver using indirect PCM data transfer
by GitHub issues - edited 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was edited from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon with WebUI](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D mydshare sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D mydshare) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D mydshare). I could fix the issue applying the following temporary fix to the `alsa-lib`: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the `alsa-lib` it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

no audio when using the dshare plugin with ALSA driver using indirect PCM data transfer
by GitHub issues - edited 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was edited from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon implementation](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using the indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D mydshare sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D mydshare) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D mydshare). I could fix the issue applying the following temporary fix to the `alsa-lib`: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the `alsa-lib` it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

no audio when using the dshare plugin with a ALSA driver using indirect PCM data transfer
by GitHub issues - edited 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was edited from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon implementation](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using the indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D mydshare sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D mydshare) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D mydshare). I could fix the issue applying the following temporary fix to the `alsa-lib`: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the `alsa-lib` it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

no audio when using the dshare plugin
by GitHub issues - opened 17 May '20

17 May '20

alsa-project/alsa-lib issue #51 was opened from bondagit: Hi all, I am currently working on an open source project on GitHub [AES67 Linux daemon implementation](https://github.com/bondagit/aes67-linux-daemon). This project uses the [Merging Technologies ALSA RAVENNA/AES67 Linux Driver](https://bitbucket.org/MergingTechnologies/ravenna-alsa-lkm/src/mast…. This ALSA driver does support the mmap access using the indirect PCM data transfer. The driver is working properly when used directly but not when it's used via the **dshare** plugin. See issue [No sound using dshare in asound.conf](https://github.com/bondagit/aes67-linux-daemon/issues/7) in the AES67 Linux daemon project. For all my tests I used the **Linux Kernel 5.3.0-51** and the **alsa-lib v1.1.9** but I get same results with most recent kernel and with the **alsa-lib** on the master branch. Basically when I playback a sample PCM audio using the ALSA RAVENNA/AES67 HW device directly via mmap I get a proper playout. Ex: `aplay -D hw:1 sample.raw -M` But if I do the same using the dshare plugin I do always get no audio (silence): Ex: `aplay -D mydshare sample.raw -M` After a number of tests trying to compare the behavior of the **alsa-lib** when using the ALSA driver directly (aplay -D hw:1) and when using the plugin (aplay -D mydshare) I realized that in the second case the **SNDRV_PCM_IOCTL_SYNC_PTR ioctl** is never triggered in the audio loop by the **alsa-lib** . (I could easily capture this by using strace). I would expect the `snd_pcm_dshare_mmap_commit() `function of **alsa-lib** to invoke the above ioctl but this is not happening. The result is that in the ALSA driver the **ack()** callback is not called to indicate that the **appl_ptr** is updated and this causes the problem we have. In the Linux kernel when the ioctl SNDRV_PCM_IOCTL_SYNC_PTR is called the following functions are called: `snd_pcm_sync_ptr() -> pcm_lib_apply_appl_ptr() -> substream->ops->ack() ` but as stated above this is happening only if the ALSA driver is used directly (aplay -D hw:1) and not when it's used via the plugin (aplay -D mydshare). I could fix the issue applying the following temporary fix to the `alsa-lib`: ``` diff --git a/src/pcm/pcm_dshare.c b/src/pcm/pcm_dshare.c index f135b5df..1f103414 100644 --- a/src/pcm/pcm_dshare.c +++ b/src/pcm/pcm_dshare.c @@ -562,6 +562,7 @@ static snd_pcm_sframes_t snd_pcm_dshare_mmap_commit(snd_pcm_t *pcm, /* clear timer queue to avoid a bogus return from poll */ if (snd_pcm_mmap_playback_avail(pcm) < pcm->avail_min) snd_pcm_direct_clear_timer_queue(dshare); + dshare->spcm->fast_ops->mmap_commit(dshare->spcm, offset, size); } return size; } ``` The fix basically triggers the call to the `snd_pcm_hw_mmap_commit()` function of the slave pcm of the dshare plugin. This function invokes the ` issue_applptr() ` and then the `sync_ptr1()` that finally calls the SNDRV_PCM_IOCTL_SYNC_PTR ioctl to update the **appl_ptr** in the kernel. After applying this fix I can properly hear the audio. I am available to provide any additional information and to do additional tests. Since I don't have much experience with the `alsa-lib` it can be that the problem is related to some misconfiguration but at present I managed to solve the issue only by applying the above fix. Thanks in advance for your help. Issue URL : https://github.com/alsa-project/alsa-lib/issues/51 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

ucm: initialize mgr->once_list
by GitHub pull_request - opened 16 May '20

16 May '20

alsa-project/alsa-lib pull request #50 was opened from asavah: Initiliaze mgr->once_list otherwise eg `alsactl restore 0` will segfault in https://github.com/alsa-project/alsa-lib/blob/master/src/ucm/utils.c#L570 in case that `/var/lib/alsa/alsa.state` is not present. Request URL : https://github.com/alsa-project/alsa-lib/pull/50 Patch URL : https://github.com/alsa-project/alsa-lib/pull/50.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH 0/2] ALSA: hda: Cleanup helpers
by Takashi Iwai 16 May '20

16 May '20

Some helper functions are used only locally or not used, here just a simple cleanup. Takashi === Takashi Iwai (2): ALSA: hda: Drop unused snd_hda_queue_unsol_event() ALSA: hda: Unexport some local helper functions include/sound/hda_codec.h | 7 ------- include/sound/hdaudio.h | 3 --- sound/hda/hdac_bus.c | 2 -- sound/hda/hdac_controller.c | 1 + sound/hda/local.h | 3 +++ 5 files changed, 4 insertions(+), 12 deletions(-) -- 2.16.4

1 2

[PATCH] ALSA: hda: Fix potential race in unsol event handler
by Takashi Iwai 16 May '20

16 May '20

The unsol event handling code has a loop retrieving the read/write indices and the arrays without locking while the append to the array may happen concurrently. This may lead to some inconsistency. Although there hasn't been any proof of this bad results, it's still safer to protect the racy accesses. This patch adds the spinlock protection around the unsol handling loop for addressing it. Here we take bus->reg_lock as the writer side snd_hdac_bus_queue_event() is also protected by that lock. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/hda/hdac_bus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c index 26b391be3656..09ddab5f5cae 100644 --- a/sound/hda/hdac_bus.c +++ b/sound/hda/hdac_bus.c @@ -160,6 +160,7 @@ static void snd_hdac_bus_process_unsol_events(struct work_struct *work) struct hdac_driver *drv; unsigned int rp, caddr, res; + spin_lock_irq(&bus->reg_lock); while (bus->unsol_rp != bus->unsol_wp) { rp = (bus->unsol_rp + 1) % HDA_UNSOL_QUEUE_SIZE; bus->unsol_rp = rp; @@ -171,10 +172,13 @@ static void snd_hdac_bus_process_unsol_events(struct work_struct *work) codec = bus->caddr_tbl[caddr & 0x0f]; if (!codec || !codec->dev.driver) continue; + spin_unlock_irq(&bus->reg_lock); drv = drv_to_hdac_driver(codec->dev.driver); if (drv->unsol_event) drv->unsol_event(codec, res); + spin_lock_irq(&bus->reg_lock); } + spin_unlock_irq(&bus->reg_lock); } /** -- 2.25.0

1 0

Alsa doesn't respect XDG Base Directory standard?
by GitHub issues - opened 16 May '20

16 May '20

alsa-project/alsa-lib issue #49 was opened from luxintra: My .config is set to $XDG_CONFIG_HOME and moving asoundrc to $XDG_CONFIG_HOME/alsa ...does not work for me. Issue URL : https://github.com/alsa-project/alsa-lib/issues/49 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH] ALSA: fixing upper volume limit for RME Babyface Pro routing crosspoints.
by Thomas Ebeling 15 May '20

15 May '20

In my initial patch, these were set too low. Signed-off-by: Thomas Ebeling <penguins(a)bollie.de> --- sound/usb/mixer_quirks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index bdff8674942e..aad2683ff793 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2191,7 +2191,7 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer) * These devices exposes a couple of DSP functions via request to EP0. * Switches are available via control registers, while routing is controlled * by controlling the volume on each possible crossing point. - * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 46341) with + * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 65536) with * 0dB being at dec. 32768. */ enum { @@ -2220,7 +2220,7 @@ enum { #define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff #define SND_BBFPRO_MIXER_VAL_SHIFT 9 #define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf -#define SND_BBFPRO_MIXER_VAL_MAX 46341 // +6dB +#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB #define SND_BBFPRO_USBREQ_CTL_REG1 0x10 #define SND_BBFPRO_USBREQ_CTL_REG2 0x17 -- 2.26.2

2 1

core: snd_card_disconnect/snd_card_free: hang when card unregistered
by Dexter Travis 15 May '20

15 May '20

In my system during certain power events the power rail for the TLV320AIC3120 goes away and may come back. To accommodate this I have added a call to snd_soc_unregister_card as soon as I notice via GPIO that this power has been removed. I then call snd_soc_register_card to re-install the sound card after power is restored. If no sound is playing when the asynchronous power removal occurs this works fine. If a sound is playing one of two things will occur. In the first case the sound driver comes back and sound is restored when power is restored. In the second case my deferred work function which calls the snd_soc_unregister_card function gets hung and does not return. I have traced the difference to the wait_for_completion call in snd_card_free. if snd_card_disconnect adds files to shutdown_files list then wait_for_completion will hang forever. Any suggestions on how to further debug this? How to force the immediate unregister of the card even if a sound is playing? Thank you, Dexter Travis

2 3

[PATCH v2] ASoC: cros_ec_codec: switch to library API for SHA-256
by Ard Biesheuvel 15 May '20

15 May '20

The CrOS EC codec driver uses SHA-256 explicitly, and not in a performance critical manner, so there is really no point in using the SHASH crypto API here. Let's switch to the library API instead. Cc: Cheng-Yi Chiang <cychiang(a)chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> Cc: Guenter Roeck <groeck(a)chromium.org> Cc: Benson Leung <bleung(a)chromium.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Eric Biggers <ebiggers(a)kernel.org> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: Tzung-Bi Shih <tzungbi(a)google.com> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> --- v2: - rebase onto sound/for-5.8 - drop pointless memzero_explicit() - drop include of crypto/hash.h sound/soc/codecs/Kconfig | 3 +-- sound/soc/codecs/cros_ec_codec.c | 23 ++++---------------- 2 files changed, 5 insertions(+), 21 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 44b8c4cde4f3..2d4f1b4bc011 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -538,8 +538,7 @@ config SND_SOC_CQ0093VC config SND_SOC_CROS_EC_CODEC tristate "codec driver for ChromeOS EC" depends on CROS_EC - select CRYPTO - select CRYPTO_SHA256 + select CRYPTO_LIB_SHA256 help If you say yes here you will get support for the ChromeOS Embedded Controller's Audio Codec. diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index 1948bc6971f6..8d45c628e988 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -8,7 +8,6 @@ * EC for audio function. */ -#include <crypto/hash.h> #include <crypto/sha.h> #include <linux/acpi.h> #include <linux/delay.h> @@ -107,25 +106,11 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd, static int calculate_sha256(struct cros_ec_codec_priv *priv, uint8_t *buf, uint32_t size, uint8_t *digest) { - struct crypto_shash *tfm; - struct shash_desc *desc; + struct sha256_state sctx; - tfm = crypto_alloc_shash("sha256", CRYPTO_ALG_TYPE_SHASH, 0); - if (IS_ERR(tfm)) { - dev_err(priv->dev, "can't alloc shash\n"); - return PTR_ERR(tfm); - } - desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL); - if (!desc) { - crypto_free_shash(tfm); - return -ENOMEM; - } - desc->tfm = tfm; - crypto_shash_digest(desc, buf, size, digest); - shash_desc_zero(desc); - - kfree(desc); - crypto_free_shash(tfm); + sha256_init(&sctx); + sha256_update(&sctx, buf, size); + sha256_final(&sctx, digest); #ifdef DEBUG { -- 2.17.1

3 2

[PATCH v2 0/2] ASoC: fsl_esai: Add support for imx8qm
by Shengjiu Wang 15 May '20

15 May '20

Add support for imx8qm. Shengjiu Wang (2): ASoC: fsl_esai: introduce SoC specific data ASoC: fsl_esai: Add new compatible string for imx8qm Changes in v2 - drop the 0002 patch in v1, the dma relate limitation should be done in dma driver, or define a new DMA API for it. .../devicetree/bindings/sound/fsl,esai.txt | 1 + sound/soc/fsl/fsl_esai.c | 46 +++++++++++++++---- 2 files changed, 38 insertions(+), 9 deletions(-) -- 2.21.0

2 3

[PATCH v2] RME Babyface Pro mixer patch: Fixing max vol
by Thomas Ebeling 15 May '20

15 May '20

Added mixer quirks to allow controlling the internal DSP of the RME Babyface Pro and its successor Babyface Pro FS. v2 fixes the initially wrong upper limit of the volume control. Signed-off-by: Thomas Ebeling <penguins(a)bollie.de> --- sound/usb/mixer_quirks.c | 418 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index a5f65a9a0254..aad2683ff793 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2185,6 +2185,421 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer) return 0; } +/* + * RME Babyface Pro (FS) + * + * These devices exposes a couple of DSP functions via request to EP0. + * Switches are available via control registers, while routing is controlled + * by controlling the volume on each possible crossing point. + * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 65536) with + * 0dB being at dec. 32768. + */ +enum { + SND_BBFPRO_CTL_REG1 = 0, + SND_BBFPRO_CTL_REG2 +}; + +#define SND_BBFPRO_CTL_REG_MASK 1 +#define SND_BBFPRO_CTL_IDX_MASK 0xff +#define SND_BBFPRO_CTL_IDX_SHIFT 1 +#define SND_BBFPRO_CTL_VAL_MASK 1 +#define SND_BBFPRO_CTL_VAL_SHIFT 9 +#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0 +#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1 +#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7 +#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8 +#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10 +#define SND_BBFPRO_CTL_REG2_48V_AN1 0 +#define SND_BBFPRO_CTL_REG2_48V_AN2 1 +#define SND_BBFPRO_CTL_REG2_SENS_IN3 2 +#define SND_BBFPRO_CTL_REG2_SENS_IN4 3 +#define SND_BBFPRO_CTL_REG2_PAD_AN1 4 +#define SND_BBFPRO_CTL_REG2_PAD_AN2 5 + +#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff +#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff +#define SND_BBFPRO_MIXER_VAL_SHIFT 9 +#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf +#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB + +#define SND_BBFPRO_USBREQ_CTL_REG1 0x10 +#define SND_BBFPRO_USBREQ_CTL_REG2 0x17 +#define SND_BBFPRO_USBREQ_MIXER 0x12 + +static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg, + u8 index, u8 value) +{ + int err; + u16 usb_req, usb_idx, usb_val; + struct snd_usb_audio *chip = mixer->chip; + + err = snd_usb_lock_shutdown(chip); + if (err < 0) + return err; + + if (reg == SND_BBFPRO_CTL_REG1) { + usb_req = SND_BBFPRO_USBREQ_CTL_REG1; + if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) { + usb_idx = 3; + usb_val = value ? 3 : 0; + } else { + usb_idx = 1 << index; + usb_val = value ? usb_idx : 0; + } + } else { + usb_req = SND_BBFPRO_USBREQ_CTL_REG2; + usb_idx = 1 << index; + usb_val = value ? usb_idx : 0; + } + + err = snd_usb_ctl_msg(chip->dev, + usb_sndctrlpipe(chip->dev, 0), usb_req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + usb_val, usb_idx, 0, 0); + + snd_usb_unlock_shutdown(chip); + return err; +} + +static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + u8 reg, idx, val; + int pv; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT; + + if ((reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) || + (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) { + ucontrol->value.enumerated.item[0] = val; + } else { + ucontrol->value.integer.value[0] = val; + } + return 0; +} + +static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + u8 reg, idx; + int pv; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + + if (reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) { + static const char * const texts[2] = { + "AutoSync", + "Internal" + }; + return snd_ctl_enum_info(uinfo, 1, 2, texts); + } else if (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) { + static const char * const texts[2] = { + "-10dBV", + "+4dBu" + }; + return snd_ctl_enum_info(uinfo, 1, 2, texts); + } + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + return 0; +} + +static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int err; + u8 reg, idx; + int old_value, pv, val; + + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol); + struct usb_mixer_interface *mixer = list->mixer; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK; + + if ((reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) || + (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) { + val = ucontrol->value.enumerated.item[0]; + } else { + val = ucontrol->value.integer.value[0]; + } + + if (val > 1) + return -EINVAL; + + if (val == old_value) + return 0; + + kcontrol->private_value = reg + | ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT) + | ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT); + + err = snd_bbfpro_ctl_update(mixer, reg, idx, val); + return err < 0 ? err : 1; +} + +static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list) +{ + u8 reg, idx; + int value, pv; + + pv = list->kctl->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK; + + return snd_bbfpro_ctl_update(list->mixer, reg, idx, value); +} + +static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index, + u32 value) +{ + struct snd_usb_audio *chip = mixer->chip; + int err; + u16 idx; + u16 usb_idx, usb_val; + u32 v; + + err = snd_usb_lock_shutdown(chip); + if (err < 0) + return err; + + idx = index & SND_BBFPRO_MIXER_IDX_MASK; + // 18 bit linear volume, split so 2 bits end up in index. + v = value & SND_BBFPRO_MIXER_VAL_MASK; + usb_idx = idx | (v & 0x3) << 14; + usb_val = (v >> 2) & 0xffff; + + err = snd_usb_ctl_msg(chip->dev, + usb_sndctrlpipe(chip->dev, 0), + SND_BBFPRO_USBREQ_MIXER, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, + usb_val, usb_idx, 0, 0); + + snd_usb_unlock_shutdown(chip); + return err; +} + +static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = + kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT; + return 0; +} + +static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN; + uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX; + return 0; +} + +static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int err; + u16 idx; + u32 new_val, old_value, uvalue; + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol); + struct usb_mixer_interface *mixer = list->mixer; + + uvalue = ucontrol->value.integer.value[0]; + idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK; + old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT; + + if (uvalue > SND_BBFPRO_MIXER_VAL_MAX) + return -EINVAL; + + if (uvalue == old_value) + return 0; + + new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK; + + kcontrol->private_value = idx + | (new_val << SND_BBFPRO_MIXER_VAL_SHIFT); + + err = snd_bbfpro_vol_update(mixer, idx, new_val); + return err < 0 ? err : 1; +} + +static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list) +{ + int pv = list->kctl->private_value; + u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK; + u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT) + & SND_BBFPRO_MIXER_VAL_MASK; + return snd_bbfpro_vol_update(list->mixer, idx, val); +} + +// Predfine elements +static const struct snd_kcontrol_new snd_bbfpro_ctl_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .index = 0, + .info = snd_bbfpro_ctl_info, + .get = snd_bbfpro_ctl_get, + .put = snd_bbfpro_ctl_put +}; + +static const struct snd_kcontrol_new snd_bbfpro_vol_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .index = 0, + .info = snd_bbfpro_vol_info, + .get = snd_bbfpro_vol_get, + .put = snd_bbfpro_vol_put +}; + +static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg, + u8 index, char *name) +{ + struct snd_kcontrol_new knew = snd_bbfpro_ctl_control; + + knew.name = name; + knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK) + | ((index & SND_BBFPRO_CTL_IDX_MASK) + << SND_BBFPRO_CTL_IDX_SHIFT); + + return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume, + &knew, NULL); +} + +static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index, + char *name) +{ + struct snd_kcontrol_new knew = snd_bbfpro_vol_control; + + knew.name = name; + knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK; + + return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume, + &knew, NULL); +} + +static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer) +{ + int err, i, o; + char name[48]; + + static const char * const input[] = { + "AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3", + "ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"}; + + static const char * const output[] = { + "AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4", + "ADAT5", "ADAT6", "ADAT7", "ADAT8"}; + + for (o = 0 ; o < 12 ; ++o) { + for (i = 0 ; i < 12 ; ++i) { + // Line routing + snprintf(name, sizeof(name), + "%s-%s-%s Playback Volume", + (i < 2 ? "Mic" : "Line"), + input[i], output[o]); + err = snd_bbfpro_vol_add(mixer, (26 * o + i), name); + if (err < 0) + return err; + + // PCM routing... yes, it is output remapping + snprintf(name, sizeof(name), + "PCM-%s-%s Playback Volume", + output[i], output[o]); + err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i), + name); + if (err < 0) + return err; + } + } + + // Control Reg 1 + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_CLK_OPTICAL, + "Sample Clock Source"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_PRO, + "IEC958 Pro Mask"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_EMPH, + "IEC958 Emphasis"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL, + "IEC958 Switch"); + if (err < 0) + return err; + + // Control Reg 2 + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_48V_AN1, + "Mic-AN1 48V"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_48V_AN2, + "Mic-AN2 48V"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_SENS_IN3, + "Line-IN3 Sens."); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_SENS_IN4, + "Line-IN4 Sens."); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_PAD_AN1, + "Mic-AN1 PAD"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_PAD_AN2, + "Mic-AN2 PAD"); + if (err < 0) + return err; + + return 0; +} + int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -2286,6 +2701,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */ err = snd_sc1810_init_mixer(mixer); break; + case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */ + err = snd_bbfpro_controls_create(mixer); + break; } return err; -- 2.26.2

2 3

[PATCH 0/3] ASoC: fsl_esai: Add support for imx8qm
by Shengjiu Wang 15 May '20

15 May '20

Add support for imx8qm. Shengjiu Wang (3): ASoC: fsl_esai: introduce SoC specific data ASoC: fsl_esai: Add support for imx8qm ASoC: fsl_esai: Add new compatible string for imx8qm .../devicetree/bindings/sound/fsl,esai.txt | 1 + sound/soc/fsl/fsl_esai.c | 65 ++++++++++++++++--- 2 files changed, 57 insertions(+), 9 deletions(-) -- 2.21.0

5 10

[PATCH] SoC: cros_ec_codec: switch to library API for SHA-256
by Ard Biesheuvel 15 May '20

15 May '20

The CrOS EC codec driver uses SHA-256 explicitly, and not in a performance critical manner, so there is really no point in using the dynamic SHASH crypto API here. Let's switch to the library API instead. Cc: Cheng-Yi Chiang <cychiang(a)chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> Cc: Guenter Roeck <groeck(a)chromium.org> Cc: Benson Leung <bleung(a)chromium.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Eric Biggers <ebiggers(a)kernel.org> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> --- Looking at the code, I was wondering if the SHA-256 is really required here? It looks like it is using it as some kind of fingerprint to decide whether the provided file is identical to the one that has already been loaded. If this is the case, we should probably just use CRC32 instead. Also, do we really need to wipe the context struct? Is there any security sensitive data in there? sound/soc/codecs/Kconfig | 3 +-- sound/soc/codecs/cros_ec_codec.c | 21 +++++--------------- 2 files changed, 6 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e6a0c5d05fa5..c7ce4cc658cf 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -537,8 +537,7 @@ config SND_SOC_CQ0093VC config SND_SOC_CROS_EC_CODEC tristate "codec driver for ChromeOS EC" depends on CROS_EC - select CRYPTO - select CRYPTO_SHA256 + select CRYPTO_LIB_SHA256 help If you say yes here you will get support for the ChromeOS Embedded Controller's Audio Codec. diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index d3dc42aa6825..6bc02c485ab2 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -107,24 +107,13 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd, static int calculate_sha256(struct cros_ec_codec_priv *priv, uint8_t *buf, uint32_t size, uint8_t *digest) { - struct crypto_shash *tfm; + struct sha256_state sctx; - tfm = crypto_alloc_shash("sha256", CRYPTO_ALG_TYPE_SHASH, 0); - if (IS_ERR(tfm)) { - dev_err(priv->dev, "can't alloc shash\n"); - return PTR_ERR(tfm); - } - - { - SHASH_DESC_ON_STACK(desc, tfm); - - desc->tfm = tfm; - - crypto_shash_digest(desc, buf, size, digest); - shash_desc_zero(desc); - } + sha256_init(&sctx); + sha256_update(&sctx, buf, size); + sha256_final(&sctx, digest); - crypto_free_shash(tfm); + memzero_explicit(&sctx, sizeof(sctx)); #ifdef DEBUG { -- 2.17.1

4 9

[RESEND PATCH v2] ALSA: hda: Allow SST driver on SKL and KBL platforms with DMIC
by Cezary Rojewski 15 May '20

15 May '20

Update intel-dspcfg with FLAG_SST_ONLY_IF_DMIC option and use it for Skylake and Kabylake platforms when DMIC is present. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- Changes in v2: - no functional changes, just rebased to fix conflicts sound/hda/intel-dsp-config.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 1c1fdab2a55f..20b8f6cb3ff8 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -19,6 +19,7 @@ MODULE_PARM_DESC(dsp_driver, "Force the DSP driver for Intel DSP (0=auto, 1=lega #define FLAG_SST BIT(0) #define FLAG_SOF BIT(1) +#define FLAG_SST_ONLY_IF_DMIC BIT(15) #define FLAG_SOF_ONLY_IF_DMIC BIT(16) #define FLAG_SOF_ONLY_IF_SOUNDWIRE BIT(17) @@ -107,6 +108,10 @@ static const struct config_entry config_table[] = { {} } }, + { + .flags = FLAG_SST | FLAG_SST_ONLY_IF_DMIC, + .device = 0x9d70, + }, #endif /* Kabylake-LP */ #if IS_ENABLED(CONFIG_SND_SOC_INTEL_KBL) @@ -123,6 +128,10 @@ static const struct config_entry config_table[] = { {} } }, + { + .flags = FLAG_SST | FLAG_SST_ONLY_IF_DMIC, + .device = 0x9d71, + }, #endif /* @@ -410,8 +419,17 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) return SND_INTEL_DSP_DRIVER_SOF; } - if (cfg->flags & FLAG_SST) - return SND_INTEL_DSP_DRIVER_SST; + + if (cfg->flags & FLAG_SST) { + if (cfg->flags & FLAG_SST_ONLY_IF_DMIC) { + if (snd_intel_dsp_check_dmic(pci)) { + dev_info(&pci->dev, "Digital mics found on Skylake+ platform, using SST driver\n"); + return SND_INTEL_DSP_DRIVER_SST; + } + } else { + return SND_INTEL_DSP_DRIVER_SST; + } + } return SND_INTEL_DSP_DRIVER_LEGACY; } -- 2.17.1

2 2

[PATCH 0/4] ASoC: Intel: Add KeemBay ASoC driver
by Sia Jee Heng 15 May '20

15 May '20

The below series of patches support the KeemBay ASoC driver. It enabled the tlv320aic3204 machine driver and the platform driver initialize the i2s to capture and playback the pcm data on the ARM. The i2s is running in polling mode. There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin to perform some Audio preprocessing. Sia Jee Heng (4): ASoC: Intel: Add KeemBay platform driver ASoC: Intel: Boards: Add KeemBay machine driver ASoC: Intel: Add makefiles and kconfig changes for KeemBay dt-bindings: sound: Add documentation for KeemBay sound card and i2s .../bindings/sound/intel,keembay-i2s.yaml | 57 ++ .../bindings/sound/intel,keembay-sound-card.yaml | 30 + sound/soc/intel/Kconfig | 7 + sound/soc/intel/Makefile | 1 + sound/soc/intel/boards/Kconfig | 15 + sound/soc/intel/boards/Makefile | 4 + sound/soc/intel/boards/kmb_tlv3204.c | 144 ++++ sound/soc/intel/keembay/Makefile | 4 + sound/soc/intel/keembay/kmb_platform.c | 746 +++++++++++++++++++++ sound/soc/intel/keembay/kmb_platform.h | 145 ++++ 10 files changed, 1153 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-sound-card.yaml create mode 100644 sound/soc/intel/boards/kmb_tlv3204.c create mode 100644 sound/soc/intel/keembay/Makefile create mode 100644 sound/soc/intel/keembay/kmb_platform.c create mode 100644 sound/soc/intel/keembay/kmb_platform.h -- 1.9.1

3 6

[V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 15 May '20

15 May '20

Add documentation for DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changed since V4: * No changes. Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +}; -- 2.17.1

1 0

[PATCH v2 00/21] ASoC: cleanup DAI/Component activity
by Kuninori Morimoto 15 May '20

15 May '20

Hi Mark These are v2 of DAI/Component activity cleanup. This patch-set exchanges soc-dapm.c :: snd_soc_dai_link_event_xxx() behavior which updates dai->active but not cares other actives. But I think original code was wrong. So, I believe these works correctly, but maybe need some tests or deep review. v1 patch-set used "activity", but v2 is using "active" for each function/macro naming. Link: https://lore.kernel.org/r/875zd39frp.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (21): ASoC: soc-pcm: replace snd_soc_runtime_activate()/deactivate() to macro ASoC: soc-dai: add snd_soc_dai_action() ASoC: soc-dapm: use snd_soc_dai_activate()/deactivate() ASoC: soc-dai: add snd_soc_dai_active() ASoC: soc-component: add snd_soc_component_active() ASoC: soc-dai: add snd_soc_dai_stream_active() ASoC: use snd_soc_xxx_active() ASoC: atomel: use snd_soc_xxx_active() ASoC: bcm: use snd_soc_xxx_active() ASoC: cirrus: use snd_soc_xxx_active() ASoC: codecs: use snd_soc_xxx_active() ASoC: fsl: use snd_soc_xxx_active() ASoC: intel: use snd_soc_xxx_active() ASoC: jz4740: use snd_soc_xxx_active() ASoC: mediatek: use snd_soc_xxx_active() ASoC: meson: use snd_soc_xxx_active() ASoC: pxa: use snd_soc_xxx_active() ASoC: ti: use snd_soc_xxx_active() ASoC: uniphier: use snd_soc_xxx_active() ASoC: dwc: use snd_soc_xxx_active() ASoC: cleanup dai / component active code include/sound/soc-component.h | 6 +- include/sound/soc-dai.h | 8 ++- include/sound/soc.h | 9 ++- sound/soc/atmel/atmel_ssc_dai.c | 4 +- sound/soc/bcm/bcm2835-i2s.c | 6 +- sound/soc/bcm/cygnus-ssp.c | 4 +- sound/soc/cirrus/ep93xx-i2s.c | 4 +- sound/soc/codecs/adav80x.c | 4 +- sound/soc/codecs/arizona.c | 2 +- sound/soc/codecs/cs4271.c | 4 +- sound/soc/codecs/madera.c | 2 +- sound/soc/codecs/max98090.c | 6 +- sound/soc/codecs/tlv320aic23.c | 2 +- sound/soc/codecs/tlv320dac33.c | 2 +- sound/soc/codecs/uda1380.c | 2 +- sound/soc/codecs/wl1273.c | 2 +- sound/soc/codecs/wm8711.c | 2 +- sound/soc/codecs/wm8753.c | 4 +- sound/soc/dwc/dwc-i2s.c | 2 +- sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_spdif.c | 4 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 14 ++-- sound/soc/jz4740/jz4740-i2s.c | 8 +-- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 8 +-- sound/soc/meson/axg-tdm-interface.c | 2 +- sound/soc/pxa/pxa-ssp.c | 8 +-- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/soc-compress.c | 4 +- sound/soc/soc-core.c | 11 +-- sound/soc/soc-dai.c | 23 +++++++ sound/soc/soc-dapm.c | 8 +-- sound/soc/soc-pcm.c | 70 +++++++------------- sound/soc/ti/davinci-mcasp.c | 2 +- sound/soc/ti/omap-dmic.c | 4 +- sound/soc/ti/omap-mcbsp.c | 4 +- sound/soc/ti/omap-mcpdm.c | 8 +-- sound/soc/uniphier/aio-cpu.c | 4 +- 37 files changed, 134 insertions(+), 127 deletions(-) -- 2.17.1

4 25

[PATCH v3 1/5] pcm_dmix assembly: change the token by symbolic names
by frederic.recoules＠univ-grenoble-alpes.fr 14 May '20

14 May '20

From: Frédéric Recoules <frederic.recoules(a)orange.fr> It eases the refactoring of assembly chunk since we can now add/remove/move entries without worrying about maintaining the token numbering in the template. Note: does not impact the binary output. Signed-off-by: Frédéric Recoules <frederic.recoules(a)orange.fr> --- src/pcm/pcm_dmix_i386.h | 147 ++++++++++++++++++++------------------ src/pcm/pcm_dmix_x86_64.h | 93 ++++++++++++------------ 2 files changed, 124 insertions(+), 116 deletions(-) diff --git a/src/pcm/pcm_dmix_i386.h b/src/pcm/pcm_dmix_i386.h index 2778cb1d..e816d5e0 100644 --- a/src/pcm/pcm_dmix_i386.h +++ b/src/pcm/pcm_dmix_i386.h @@ -47,14 +47,14 @@ static void MIX_AREAS_16(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %%ebx, %[old_ebx]\n" /* ebx is GOT pointer (-fPIC) */ /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" - "\tcmpl $0, %0\n" + "\tmovl %[dst], %%edi\n" + "\tmovl %[src], %%esi\n" + "\tmovl %[sum], %%ebx\n" + "\tcmpl $0, %[size]\n" "\tjnz 2f\n" "\tjmp 7f\n" @@ -64,9 +64,9 @@ static void MIX_AREAS_16(unsigned int size, */ "\t.p2align 4,,15\n" "1:" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %[dst_step], %%edi\n" + "\tadd %[src_step], %%esi\n" + "\tadd %[sum_step], %%ebx\n" /* * sample = *src; @@ -108,7 +108,7 @@ static void MIX_AREAS_16(unsigned int size, /* * while (size-- > 0) */ - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjnz 1b\n" "\tjmp 7f\n" @@ -122,7 +122,7 @@ static void MIX_AREAS_16(unsigned int size, "\tmovw $0x7fff, (%%edi)\n" "\tcmpl %%ecx,(%%ebx)\n" "\tjnz 4b\n" - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjnz 1b\n" "\tjmp 7f\n" @@ -136,16 +136,17 @@ static void MIX_AREAS_16(unsigned int size, "\tmovw $-0x8000, (%%edi)\n" "\tcmpl %%ecx, (%%ebx)\n" "\tjnz 4b\n" - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjnz 1b\n" - + "7:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %[old_ebx], %%ebx\n" /* ebx is GOT pointer (-fPIC) */ : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_ebx] "m" (old_ebx) : "esi", "edi", "edx", "ecx", "eax" ); } @@ -171,22 +172,22 @@ static void MIX_AREAS_16_MMX(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %%ebx, %[old_ebx]\n" /* ebx is GOT pointer (-fPIC) */ /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" - "\tcmpl $0, %0\n" + "\tmovl %[dst], %%edi\n" + "\tmovl %[src], %%esi\n" + "\tmovl %[sum], %%ebx\n" + "\tcmpl $0, %[size]\n" "\tjnz 2f\n" "\tjmp 5f\n" "\t.p2align 4,,15\n" "1:" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %[dst_step], %%edi\n" + "\tadd %[src_step], %%esi\n" + "\tadd %[sum_step], %%ebx\n" "2:" /* @@ -226,16 +227,17 @@ static void MIX_AREAS_16_MMX(unsigned int size, /* * while (size-- > 0) */ - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjnz 1b\n" "\temms\n" "5:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %[old_ebx], %%ebx\n" /* ebx is GOT pointer (-fPIC) */ : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_ebx] "m" (old_ebx) : "esi", "edi", "edx", "ecx", "eax" ); } @@ -261,14 +263,14 @@ static void MIX_AREAS_32(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %%ebx, %[old_ebx]\n" /* ebx is GOT pointer (-fPIC) */ /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" - "\tcmpl $0, %0\n" + "\tmovl %[dst], %%edi\n" + "\tmovl %[src], %%esi\n" + "\tmovl %[sum], %%ebx\n" + "\tcmpl $0, %[size]\n" "\tjnz 1f\n" "\tjmp 6f\n" @@ -335,20 +337,21 @@ static void MIX_AREAS_32(unsigned int size, /* * while (size-- > 0) */ - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjz 6f\n" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %[dst_step], %%edi\n" + "\tadd %[src_step], %%esi\n" + "\tadd %[sum_step], %%ebx\n" "\tjmp 1b\n" - + "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %[old_ebx], %%ebx\n" /* ebx is GOT pointer (-fPIC) */ : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_ebx] "m" (old_ebx) : "esi", "edi", "edx", "ecx", "eax" ); } @@ -374,14 +377,14 @@ static void MIX_AREAS_24(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %%ebx, %[old_ebx]\n" /* ebx is GOT pointer (-fPIC) */ /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" - "\tcmpl $0, %0\n" + "\tmovl %[dst], %%edi\n" + "\tmovl %[src], %%esi\n" + "\tmovl %[sum], %%ebx\n" + "\tcmpl $0, %[size]\n" "\tjnz 1f\n" "\tjmp 6f\n" @@ -441,20 +444,21 @@ static void MIX_AREAS_24(unsigned int size, /* * while (size-- > 0) */ - "\tdecl %0\n" + "\tdecl %[size]\n" "\tjz 6f\n" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %[dst_step], %%edi\n" + "\tadd %[src_step], %%esi\n" + "\tadd %[sum_step], %%ebx\n" "\tjmp 1b\n" - + "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %[old_ebx], %%ebx\n" /* ebx is GOT pointer (-fPIC) */ : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_ebx] "m" (old_ebx) : "esi", "edi", "edx", "ecx", "eax" ); } @@ -480,14 +484,14 @@ static void MIX_AREAS_24_CMOV(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %%ebx, %[old_ebx]\n" /* ebx is GOT pointer (-fPIC) */ /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" - "\tcmpl $0, %0\n" + "\tmovl %[dst], %%edi\n" + "\tmovl %[src], %%esi\n" + "\tmovl %[sum], %%ebx\n" + "\tcmpl $0, %[size]\n" "\tjz 6f\n" "\t.p2align 4,,15\n" @@ -541,19 +545,20 @@ static void MIX_AREAS_24_CMOV(unsigned int size, /* * while (size-- > 0) */ - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" - "\tdecl %0\n" + "\tadd %[dst_step], %%edi\n" + "\tadd %[src_step], %%esi\n" + "\tadd %[sum_step], %%ebx\n" + "\tdecl %[size]\n" "\tjnz 1b\n" - + "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ + "\tmovl %[old_ebx], %%ebx\n" /* ebx is GOT pointer (-fPIC) */ : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_ebx] "m" (old_ebx) : "esi", "edi", "edx", "ecx", "eax" ); } diff --git a/src/pcm/pcm_dmix_x86_64.h b/src/pcm/pcm_dmix_x86_64.h index 1ef608af..dc433b35 100644 --- a/src/pcm/pcm_dmix_x86_64.h +++ b/src/pcm/pcm_dmix_x86_64.h @@ -48,18 +48,18 @@ static void MIX_AREAS_16(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovq %%rbx, %7\n" + "\tmovq %%rbx, %[old_rbx]\n" /* * initialization, load RSI, RDI, RBX registers */ - "\tmovq %1, %%rdi\n" - "\tmovq %2, %%rsi\n" - "\tmovq %3, %%rbx\n" + "\tmovq %[dst], %%rdi\n" + "\tmovq %[src], %%rsi\n" + "\tmovq %[sum], %%rbx\n" /* * while (size-- > 0) { */ - "\tcmpl $0, %0\n" + "\tcmpl $0, %[size]\n" "jz 6f\n" "\t.p2align 4,,15\n" @@ -103,21 +103,22 @@ static void MIX_AREAS_16(unsigned int size, /* * while (size-- > 0) */ - "\tadd %4, %%rdi\n" - "\tadd %5, %%rsi\n" - "\tadd %6, %%rbx\n" - "\tdecl %0\n" + "\tadd %[dst_step], %%rdi\n" + "\tadd %[src_step], %%rsi\n" + "\tadd %[sum_step], %%rbx\n" + "\tdecl %[size]\n" "\tjnz 1b\n" "6:" - + "\temms\n" - "\tmovq %7, %%rbx\n" + "\tmovq %[old_rbx], %%rbx\n" : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_rbx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_rbx] "m" (old_rbx) : "rsi", "rdi", "edx", "ecx", "eax" ); } @@ -143,18 +144,18 @@ static void MIX_AREAS_32(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovq %%rbx, %7\n" + "\tmovq %%rbx, %[old_rbx]\n" /* - * initialization, load ESI, EDI, EBX registers + * initialization, load RSI, RDI, RBX registers */ - "\tmovq %1, %%rdi\n" - "\tmovq %2, %%rsi\n" - "\tmovq %3, %%rbx\n" + "\tmovq %[dst], %%rdi\n" + "\tmovq %[src], %%rsi\n" + "\tmovq %[sum], %%rbx\n" /* * while (size-- > 0) { */ - "\tcmpl $0, %0\n" + "\tcmpl $0, %[size]\n" "jz 6f\n" "\t.p2align 4,,15\n" @@ -220,19 +221,20 @@ static void MIX_AREAS_32(unsigned int size, /* * while (size-- > 0) */ - "\tadd %4, %%rdi\n" - "\tadd %5, %%rsi\n" - "\tadd %6, %%rbx\n" - "\tdecl %0\n" + "\tadd %[dst_step], %%rdi\n" + "\tadd %[src_step], %%rsi\n" + "\tadd %[sum_step], %%rbx\n" + "\tdecl %[size]\n" "\tjnz 1b\n" - + "6:" - "\tmovq %7, %%rbx\n" + "\tmovq %[old_rbx], %%rbx\n" : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_rbx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_rbx] "m" (old_rbx) : "rsi", "rdi", "edx", "ecx", "eax" ); } @@ -258,18 +260,18 @@ static void MIX_AREAS_24(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovq %%rbx, %7\n" + "\tmovq %%rbx, %[old_rbx]\n" /* - * initialization, load ESI, EDI, EBX registers + * initialization, load RSI, RDI, RBX registers */ - "\tmovq %1, %%rdi\n" - "\tmovq %2, %%rsi\n" - "\tmovq %3, %%rbx\n" + "\tmovq %[dst], %%rdi\n" + "\tmovq %[src], %%rsi\n" + "\tmovq %[sum], %%rbx\n" /* * while (size-- > 0) { */ - "\tcmpl $0, %0\n" + "\tcmpl $0, %[size]\n" "jz 6f\n" "\t.p2align 4,,15\n" @@ -316,26 +318,27 @@ static void MIX_AREAS_24(unsigned int size, "\tmovw %%ax, (%%rdi)\n" "\tshrl $16, %%eax\n" "\tmovb %%al, 2(%%rdi)\n" - + "\tcmpl %%ecx, (%%rbx)\n" "\tjnz 3b\n" /* * while (size-- > 0) */ - "\tadd %4, %%rdi\n" - "\tadd %5, %%rsi\n" - "\tadd %6, %%rbx\n" - "\tdecl %0\n" + "\tadd %[dst_step], %%rdi\n" + "\tadd %[src_step], %%rsi\n" + "\tadd %[sum_step], %%rbx\n" + "\tdecl %[size]\n" "\tjnz 1b\n" - + "6:" - "\tmovq %7, %%rbx\n" + "\tmovq %[old_rbx], %%rbx\n" : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_rbx) + : [size] "m" (size), + [dst] "m" (dst), [src] "m" (src), [sum] "m" (sum), + [dst_step] "m" (dst_step), [src_step] "m" (src_step), + [sum_step] "m" (sum_step), [old_rbx] "m" (old_rbx) : "rsi", "rdi", "edx", "ecx", "eax" ); } -- 2.17.1

3 6

[PATCH v2 1/3] ASoC: tlv320adcx140: Add controls for PDM clk
by Dan Murphy 14 May '20

14 May '20

Add ALSA controls to configure the PDM clocks. The clocks need to be configurable to accommodate various microphones that use clocks for low power/low resolution modes to high power/high resolution modes. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tlv320adcx140.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 0f713efde046..97634e0ca0ba 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -180,6 +180,17 @@ static const struct snd_kcontrol_new decimation_filter_controls[] = { SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum), }; +static const char * const pdmclk_text[] = { + "2.8224 MHz", "1.4112 MHz", "705.6 kHz", "5.6448 MHz" +}; + +static SOC_ENUM_SINGLE_DECL(pdmclk_select_enum, ADCX140_PDMCLK_CFG, 0, + pdmclk_text); + +static const struct snd_kcontrol_new pdmclk_div_controls[] = { + SOC_DAPM_ENUM("PDM Clk Divider Select", pdmclk_select_enum), +}; + static const char * const resistor_text[] = { "2.5 kOhm", "10 kOhm", "20 kOhm" }; @@ -416,6 +427,9 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, in4_resistor_controls), + SND_SOC_DAPM_MUX("PDM Clk Div Select", SND_SOC_NOPM, 0, 0, + pdmclk_div_controls), + SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0, decimation_filter_controls), }; @@ -493,6 +507,11 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"}, {"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"}, + {"PDM Clk Div Select", "2.8224 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "1.4112 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"}, + {"MIC1 Analog Mux", "Line In", "MIC1P"}, {"MIC2 Analog Mux", "Line In", "MIC2P"}, {"MIC3 Analog Mux", "Line In", "MIC3P"}, -- 2.26.2

3 5

[PATCH v3 1/3] ASoC: tlv320adcx140: Add controls for PDM clk
by Dan Murphy 14 May '20

14 May '20

Add ALSA controls to configure the PDM clocks. The clocks need to be configurable to accommodate various microphones that use clocks for low power/low resolution modes to high power/high resolution modes. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tlv320adcx140.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 0f713efde046..97634e0ca0ba 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -180,6 +180,17 @@ static const struct snd_kcontrol_new decimation_filter_controls[] = { SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum), }; +static const char * const pdmclk_text[] = { + "2.8224 MHz", "1.4112 MHz", "705.6 kHz", "5.6448 MHz" +}; + +static SOC_ENUM_SINGLE_DECL(pdmclk_select_enum, ADCX140_PDMCLK_CFG, 0, + pdmclk_text); + +static const struct snd_kcontrol_new pdmclk_div_controls[] = { + SOC_DAPM_ENUM("PDM Clk Divider Select", pdmclk_select_enum), +}; + static const char * const resistor_text[] = { "2.5 kOhm", "10 kOhm", "20 kOhm" }; @@ -416,6 +427,9 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, in4_resistor_controls), + SND_SOC_DAPM_MUX("PDM Clk Div Select", SND_SOC_NOPM, 0, 0, + pdmclk_div_controls), + SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0, decimation_filter_controls), }; @@ -493,6 +507,11 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"}, {"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"}, + {"PDM Clk Div Select", "2.8224 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "1.4112 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"}, + {"MIC1 Analog Mux", "Line In", "MIC1P"}, {"MIC2 Analog Mux", "Line In", "MIC2P"}, {"MIC3 Analog Mux", "Line In", "MIC3P"}, -- 2.26.2

2 3

[PATCH] ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
by Takashi Iwai 14 May '20

14 May '20

Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4080b492ecc0..dc2302171a71 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5969,6 +5969,7 @@ enum { ALC269_FIXUP_HP_LINE1_MIC1_LED, ALC269_FIXUP_INV_DMIC, ALC269_FIXUP_LENOVO_DOCK, + ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST, ALC269_FIXUP_NO_SHUTUP, ALC286_FIXUP_SONY_MIC_NO_PRESENCE, ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT, @@ -6293,6 +6294,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT }, + [ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_limit_int_mic_boost, + .chained = true, + .chain_id = ALC269_FIXUP_LENOVO_DOCK, + }, [ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_no_hp_to_lineout, @@ -7476,7 +7483,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), - SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST), SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), @@ -7615,6 +7622,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_HEADSET_MODE, .name = "headset-mode"}, {.id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, .name = "headset-mode-no-hp-mic"}, {.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"}, + {.id = ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST, .name = "lenovo-dock-limit-boost"}, {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, {.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"}, {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, -- 2.16.4

1 0

[PATCH] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function
by Lukasz Majczak 14 May '20

14 May '20

Split be_hw_params_fixup function for different codecs as current common function, leads to crash while trying to get snd_soc_dpcm with container_of() macro in kabylake_ssp_fixup(). The crash call path looks as below: soc_pcm_hw_params() snd_soc_dai_hw_params(codec_dai, substream, &codec_params); rtd->dai_link->be_hw_params_fixup(rtd, params) kabylake_ssp_fixup() In this case, codec_params is just a copy of an internal structure and is not embedded into struct snd_soc_dpcm thus we cannot use container_of() on it. Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> --- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 68 +++++++++++-------- 1 file changed, 39 insertions(+), 29 deletions(-) diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 1b1f8d7a4ea3..2e0ae724122c 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -328,46 +328,55 @@ static const struct snd_soc_ops kabylake_rt5663_fe_ops = { .startup = kbl_fe_startup, }; -static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, - struct snd_pcm_hw_params *params) +static void kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params, snd_pcm_format_t pcm_fmt) { struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); - struct snd_interval *chan = hw_param_interval(params, + struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - struct snd_soc_dpcm *dpcm = container_of( - params, struct snd_soc_dpcm, hw_params); - struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; - struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; /* * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ - if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || - !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || - !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { - rate->min = rate->max = 48000; - chan->min = chan->max = 2; - snd_mask_none(fmt); - snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); - } else if (!strcmp(fe_dai_link->name, "Kbl Audio DMIC cap")) { - if (params_channels(params) == 2 || - DMIC_CH(dmic_constraints) == 2) - chan->min = chan->max = 2; - else - chan->min = chan->max = 4; - } - /* - * The speaker on the SSP0 supports S16_LE and not S24_LE. - * thus changing the mask here - */ - if (!strcmp(be_dai_link->name, "SSP0-Codec")) - snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + snd_mask_none(fmt); + snd_mask_set_format(fmt, pcm_fmt); +} + +static int kabylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S16_LE); return 0; } +static int kabylake_ssp1_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + + kabylake_ssp_fixup(rtd, params, SNDRV_PCM_FORMAT_S24_LE); + return 0; +} + +static int kabylake_dmic_cap_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + if (params_channels(params) == 2 || + DMIC_CH(dmic_constraints) == 2) + channels->min = channels->max = 2; + else + channels->min = channels->max = 4; + + return 0; +} static int kabylake_rt5663_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -582,6 +591,7 @@ static struct snd_soc_dai_link kabylake_dais[] = { .dpcm_capture = 1, .nonatomic = 1, .dynamic = 1, + .be_hw_params_fixup = kabylake_dmic_cap_fixup, .ops = &kabylake_dmic_ops, SND_SOC_DAILINK_REG(dmic, dummy, platform), }, @@ -618,7 +628,7 @@ static struct snd_soc_dai_link kabylake_dais[] = { SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, - .be_hw_params_fixup = kabylake_ssp_fixup, + .be_hw_params_fixup = kabylake_ssp0_fixup, .dpcm_playback = 1, .dpcm_capture = 1, .ops = &kabylake_ssp0_ops, @@ -632,7 +642,7 @@ static struct snd_soc_dai_link kabylake_dais[] = { .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, - .be_hw_params_fixup = kabylake_ssp_fixup, + .be_hw_params_fixup = kabylake_ssp1_fixup, .ops = &kabylake_rt5663_ops, .dpcm_playback = 1, .dpcm_capture = 1, -- 2.25.1

3 2

sound over USB
by Subhashini Rao Beerisetty 14 May '20

14 May '20

Hi all, In my Linux machine, I connected the plantronics usb headset with mic and I see(with the help of dmesg) that this device detected. [116676.507868] usb 2-2: new full-speed USB device number 5 using xhci_hcd [116676.923445] usb 2-2: New USB device found, idVendor=047f, idProduct=c012 [116676.927091] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [116676.934252] usb 2-2: Product: Plantronics .Audio 628 USB [116676.941445] usb 2-2: Manufacturer: Plantronics [116676.945731] usb 2-2: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes [116677.078071] hidraw: raw HID events driver (C) Jiri Kosina [116677.159669] usbcore: registered new interface driver usbhid [116677.161686] usbhid: USB HID core driver [116677.175458] input: Plantronics Plantronics .Audio 628 USB as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.3/0003:047F:C012.0001/input/input4 [116677.234588] plantronics 0003:047F:C012.0001: input,hiddev0,hidraw0: USB HID v1.00 Device [Plantronics Plantronics .Audio 628 USB] on usb-0000:00:14.0-2/input3 [116677.281756] usbcore: registered new interface driver snd-usb-audio The following nodes are present in the /dev/snd $ ls -l /dev/snd/ total 0 drwxr-xr-x 2 root root 60 May 12 11:32 by-id drwxr-xr-x 2 root root 60 May 12 11:32 by-path crw-rw---- 1 root audio 116, 2 May 12 11:32 controlC1 crw-rw---- 1 root audio 116, 4 May 12 11:32 pcmC1D0c crw-rw---- 1 root audio 116, 3 May 12 11:32 pcmC1D0p crw-rw---- 1 root audio 116, 1 May 12 11:32 seq crw-rw---- 1 root audio 116, 33 May 12 11:32 timer What are all these devices present in /dev/snd How do I use it for playing and recording an audio? Basically first I want to gain knowledge on set of test cases I can run on ALSA and then learn ALSA kernel modules stuff including snd_usb_audio mdule. So please guide me by providing related documentation/Steps. Thanks,

4 4

[V4 PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 14 May '20

14 May '20

This is the initial amplifier driver for max98390. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changes since V3: * Add operation at max98390_dsm_calib_get: Add cal_running variable at max98390_priv structure Add return cal_running at max98390_dsm_calib_get Update cal_running value during calibration * Update max98390_dsm_init func Add dsm_param bin name can select upon vendor and product name. Changes since V2: * Removed warn massage in max98390_dsm_calib_get func and add comment. Changes since V1: * Updated according to Mark's comments. * Updated according to Tzung-Bi's comments. * Removed Enum structure and use TLV data for Volume control sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1048 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 664 ++++++++++++++++++++++ 4 files changed, 1719 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..93f88cd9970a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..b47ddd295f56 --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1048 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max98390.c -- MAX98390 ALSA Soc Audio driver + * + * Copyright (C) 2020 Maxim Integrated Products + * + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_dbg(component->dev, + "Tdm mode : %d\n", max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static DECLARE_TLV_DB_SCALE(max98390_spk_tlv, 300, 300, 0); +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + ucontrol->value.integer.value[0] = rdc0 | rdc << 8; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->cal_running; + + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98390_R203D_SPK_GAIN, + 0, 6, 0, + max98390_spk_tlv), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + char filename[128]; + const char *vendor, *product; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw; + char *dsm_param; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + if (vendor && product) { + sprintf(filename, "dsm_param_%s_%s.bin", + vendor, product); + } else { + sprintf(filename, "dsm_param.bin"); + } + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + ret = request_firmware(&fw, "dsm_param.bin", component->dev); + if (ret) + goto err; + } + + dev_dbg(component->dev, + "max98390: param fw size %ld\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->cal_running = 1; + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + max98390->cal_running = 0; + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + /* Update dsm bin param */ + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..d5c79e850fbb --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,664 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d +#define THERMAL_COILTEMP_RD_BACK_BYTE1 0x239e +#define THERMAL_COILTEMP_RD_BACK_BYTE0 0x239f + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; + unsigned int cal_running; +}; +#endif -- 2.17.1

1 0

[V4 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 14 May '20

14 May '20

Add documentation for DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changed since V3: * No changes. Changed since V2: * No changes. Changed since V1: * Modified sample text in example .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +}; -- 2.17.1

1 0

[V3 PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 14 May '20

14 May '20

This is the initial amplifier driver for max98390. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changes since V2: * Removed warn massage in max98390_dsm_calib_get func and add comment. Changes since v1: * Updated according to Mark's comments. * Updated according to Tzung-Bi's comments. * Removed Enum structure and use TLV data for Volume control sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1030 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 663 ++++++++++++++++++++++ 4 files changed, 1700 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..93f88cd9970a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..3b7e2962fc90 --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1030 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max98390.c -- MAX98390 ALSA Soc Audio driver + * + * Copyright (C) 2020 Maxim Integrated Products + * + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_dbg(component->dev, + "Tdm mode : %d\n", max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static DECLARE_TLV_DB_SCALE(max98390_spk_tlv, 300, 300, 0); +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + ucontrol->value.integer.value[0] = rdc0 | rdc << 8; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* Do nothing. */ + + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98390_R203D_SPK_GAIN, + 0, 6, 0, + max98390_spk_tlv), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + const char *filename = "dsm_param.bin"; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw; + char *dsm_param; + + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + dev_err(component->dev, + "Failed to acquire dsm params: %d\n", ret); + goto err; + } + + dev_dbg(component->dev, + "max98390: param fw size %ld\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + /* Update dsm bin param */ + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..f59cb114d957 --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,663 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d +#define THERMAL_COILTEMP_RD_BACK_BYTE1 0x239e +#define THERMAL_COILTEMP_RD_BACK_BYTE0 0x239f + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; +}; +#endif -- 2.17.1

3 6

[PATCH v2 0/1] Documentation update
by changjoon.lee＠lge.com 14 May '20

14 May '20

From: ChangJoon Lee <changjoon.lee(a)lge.com> Hi, ALSA Teams, This is documentation update purpose patch. This patch does NOT alter any of operations. This patch allows an application engineer to understand why they received negative return such as -EIO, -EBADFD, -ENOSYS, -ESTRPIPE and etc which are not fully documented on documentation site. This patch also exposes Expected Status of PCM based on bad_pcm_state() with P_STATE to help engineer to understand API behavior to the documentation site. TODO : We may need improve consistency of return value especially for snd_pcm_hw_params_current(). It returns -EBADFD when PCM is not setup while other API returns -EIO in this case. src/pcm/pcm.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 3 deletions(-) -- 2.26.2

1 1

[PATCH 0/1] Documentation update
by changjoon.lee＠lge.com 14 May '20

14 May '20

From: ChangJoon Lee <changjoon.lee(a)lge.com> Hi, ALSA Teams, This is documentation update purpose patch. This patch does NOT alter any of operations. This patch allows an application engineer to understand why they received negative return such as -EIO, -EBADFD, -ENOSYS, -ESTRPIPE and etc which are not fully documented on documentation site. This patch also exposes Expected Status of PCM based on bad_pcm_state() with P_STATE to help engineer to understand API behavior to the documentation site. TODO : We may need improve consistency of return value especially for snd_pcm_hw_params_current(). It returns -EBADFD when PCM is not setup while other API returns -EIO in this case. src/pcm/pcm.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 3 deletions(-) -- 2.26.2

2 3

[PATCH 0/1] Documentation update
by changjoon.lee＠lge.com 14 May '20

14 May '20

From: ChangJoon Lee <changjoon.lee(a)lge.com> ChangJoon Lee (1): Updated negative return values for documentation update. src/pcm/pcm.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 3 deletions(-) -- 2.26.2

3 3

[PATCH v1] ASoC: rsnd: add interrupt support for SSI BUSIF buffer
by Yongbo Zhang 14 May '20

14 May '20

SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data. This patch adds overflow and underflow interrupt support for SSI BUSIF buffer. Reported-by: Chen Li <licheng0822(a)thundersoft.com> Signed-off-by: Yongbo Zhang <giraffesnn123(a)gmail.com> Tested-by: Chen Li <licheng0822(a)thundersoft.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Changes since v0 (thanks for the feedback Morimoto): - Replace the value of a register variable --- sound/soc/sh/rcar/gen.c | 8 +++ sound/soc/sh/rcar/rsnd.h | 9 +++ sound/soc/sh/rcar/ssi.c | 142 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 insertions(+) diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index af19010b9d88..8bd49c8a9517 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -224,6 +224,14 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv) RSND_GEN_S_REG(SSI_SYS_STATUS5, 0x884), RSND_GEN_S_REG(SSI_SYS_STATUS6, 0x888), RSND_GEN_S_REG(SSI_SYS_STATUS7, 0x88c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE0, 0x850), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE1, 0x854), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE2, 0x858), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE3, 0x85c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE4, 0x890), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE5, 0x894), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE6, 0x898), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE7, 0x89c), RSND_GEN_S_REG(HDMI0_SEL, 0x9e0), RSND_GEN_S_REG(HDMI1_SEL, 0x9e4), diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index ea6cbaa9743e..d47608ff5fac 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -189,6 +189,14 @@ enum rsnd_reg { SSI_SYS_STATUS5, SSI_SYS_STATUS6, SSI_SYS_STATUS7, + SSI_SYS_INT_ENABLE0, + SSI_SYS_INT_ENABLE1, + SSI_SYS_INT_ENABLE2, + SSI_SYS_INT_ENABLE3, + SSI_SYS_INT_ENABLE4, + SSI_SYS_INT_ENABLE5, + SSI_SYS_INT_ENABLE6, + SSI_SYS_INT_ENABLE7, HDMI0_SEL, HDMI1_SEL, SSI9_BUSIF0_MODE, @@ -237,6 +245,7 @@ enum rsnd_reg { #define SSI9_BUSIF_ADINR(i) (SSI9_BUSIF0_ADINR + (i)) #define SSI9_BUSIF_DALIGN(i) (SSI9_BUSIF0_DALIGN + (i)) #define SSI_SYS_STATUS(i) (SSI_SYS_STATUS0 + (i)) +#define SSI_SYS_INT_ENABLE(i) (SSI_SYS_INT_ENABLE0 + (i)) struct rsnd_priv; diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 4a7d3413917f..87a2182a4514 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -372,6 +372,9 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, u32 wsr = ssi->wsr; int width; int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; is_tdm = rsnd_runtime_is_tdm(io); is_tdm_split = rsnd_runtime_is_tdm_split(io); @@ -447,6 +450,38 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, cr_mode = DIEN; /* PIO : enable Data interrupt */ } + /* enable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable |= 0xf << (id * 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable |= 0xf << 4; + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + } + init_end: ssi->cr_own = cr_own; ssi->cr_mode = cr_mode; @@ -496,6 +531,13 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct device *dev = rsnd_priv_to_dev(priv); + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -517,6 +559,37 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, ssi->wsr = 0; } + /* disable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable &= ~(0xf << (id * 4)); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable &= ~(0xf << 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + return 0; } @@ -622,6 +695,11 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, int enable) { u32 val = 0; + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (rsnd_is_gen1(priv)) return 0; @@ -635,6 +713,19 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, if (enable) val = rsnd_ssi_is_dma_mode(mod) ? 0x0e000000 : 0x0f000000; + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 9: + val |= 0x0000ff00; + break; + } + } + rsnd_mod_write(mod, SSI_INT_ENABLE, val); return 0; @@ -651,6 +742,10 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, u32 status; bool elapsed = false; bool stop = false; + int is_tdm, is_tdm_split; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); spin_lock(&priv->lock); @@ -672,6 +767,53 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, stop = true; } + status = 0; + + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + status = rsnd_mod_read(mod, + SSI_SYS_STATUS(i * 2)); + status &= 0xf << (id * 4); + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS(i * 2), + 0xf << (id * 4)); + stop = true; + break; + } + } + break; + case 9: + for (i = 0; i < 4; i++) { + status = rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1)); + status &= 0xf << 4; + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1), + 0xf << 4); + stop = true; + break; + } + } + break; + } + } + rsnd_ssi_status_clear(mod); rsnd_ssi_interrupt_out: spin_unlock(&priv->lock); -- 2.26.2

3 7

[PATCH v2 00/14] Add Renoir ACP driver
by Alex Deucher 13 May '20

13 May '20

This adds an ASoC driver for the ACP (Audio CoProcessor) block on AMD Renoir APUs. The full series can also be pulled from here: https://cgit.freedesktop.org/~agd5f/linux/log/?h=renoir-acp-2 V2: - Removed empty declaration of dai_ops - Removed SNDRV_PCM_INFO_BATCH flag - Defined Macros for delay and counter and corrected dma stop sequence. - Changed PCI driver pm runtime sequence - Removed redundant code Vijendar Mukunda (14): ASoC: amd: add Renoir ACP3x IP register header ASoC: amd: add Renoir ACP PCI driver ASoC: amd: add acp init/de-init functions ASoC: amd: create acp3x pdm platform device ASoC: amd: add ACP3x PDM platform driver ASoC: amd: irq handler changes for ACP3x PDM dma driver ASoC: amd: add acp3x pdm driver dma ops ASoC: amd: add ACP PDM DMA driver dai ops ASoC: amd: add Renoir ACP PCI driver PM ops ASoC: amd: add ACP PDM DMA driver pm ops ASoC: amd: enable Renoir acp3x drivers build ASoC: amd: create platform devices for Renoir ASoC: amd: RN machine driver using dmic ASoC: amd: enable build for RN machine driver sound/soc/amd/Kconfig | 13 + sound/soc/amd/Makefile | 1 + sound/soc/amd/renoir/Makefile | 7 + sound/soc/amd/renoir/acp3x-pdm-dma.c | 530 +++++++++++++++++++++ sound/soc/amd/renoir/acp3x-rn.c | 106 +++++ sound/soc/amd/renoir/rn-pci-acp3x.c | 346 ++++++++++++++ sound/soc/amd/renoir/rn_acp3x.h | 88 ++++ sound/soc/amd/renoir/rn_chip_offset_byte.h | 349 ++++++++++++++ 8 files changed, 1440 insertions(+) create mode 100644 sound/soc/amd/renoir/Makefile create mode 100644 sound/soc/amd/renoir/acp3x-pdm-dma.c create mode 100644 sound/soc/amd/renoir/acp3x-rn.c create mode 100644 sound/soc/amd/renoir/rn-pci-acp3x.c create mode 100644 sound/soc/amd/renoir/rn_acp3x.h create mode 100644 sound/soc/amd/renoir/rn_chip_offset_byte.h -- 2.25.4

3 24

[PATCH] ASoC: tlv320adcx140: Add controls for PDM clk and edge
by Dan Murphy 13 May '20

13 May '20

Add ALSA controls to configure the PDM clock and PDM input edges for the 4 digital mic inputs. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tlv320adcx140.c | 74 +++++++++++++++++++++++++++++--- 1 file changed, 69 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 0f713efde046..e860d3c62d64 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -180,6 +180,49 @@ static const struct snd_kcontrol_new decimation_filter_controls[] = { SOC_DAPM_ENUM("Decimation Filter", decimation_filter_enum), }; +static const char * const pdmclk_text[] = { + "2.8224 MHz", "1.4112 MHz", "705.6 kHz", "5.6448 MHz" +}; + +static SOC_ENUM_SINGLE_DECL(pdmclk_select_enum, ADCX140_PDMCLK_CFG, 0, + pdmclk_text); + +static const struct snd_kcontrol_new pdmclk_div_controls[] = { + SOC_DAPM_ENUM("PDM Clk Divider Select", pdmclk_select_enum), +}; + +static const char * const pdm_edge_text[] = { + "Negative", "Positive" +}; + +static SOC_ENUM_SINGLE_DECL(pdm1edge_select_enum, ADCX140_PDM_CFG, 7, + pdm_edge_text); + +static SOC_ENUM_SINGLE_DECL(pdm2edge_select_enum, ADCX140_PDM_CFG, 6, + pdm_edge_text); + +static SOC_ENUM_SINGLE_DECL(pdm3edge_select_enum, ADCX140_PDM_CFG, 5, + pdm_edge_text); + +static SOC_ENUM_SINGLE_DECL(pdm4edge_select_enum, ADCX140_PDM_CFG, 4, + pdm_edge_text); + +static const struct snd_kcontrol_new pdmin1_edge_controls[] = { + SOC_DAPM_ENUM("PDMIN1 Edge Select", pdm1edge_select_enum), +}; + +static const struct snd_kcontrol_new pdmin2_edge_controls[] = { + SOC_DAPM_ENUM("PDMIN2 Edge Select", pdm2edge_select_enum), +}; + +static const struct snd_kcontrol_new pdmin3_edge_controls[] = { + SOC_DAPM_ENUM("PDMIN3 Edge Select", pdm3edge_select_enum), +}; + +static const struct snd_kcontrol_new pdmin4_edge_controls[] = { + SOC_DAPM_ENUM("PDMIN4 Edge Select", pdm4edge_select_enum), +}; + static const char * const resistor_text[] = { "2.5 kOhm", "10 kOhm", "20 kOhm" }; @@ -416,6 +459,18 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, in4_resistor_controls), + SND_SOC_DAPM_MUX("PDM Clk Div Select", SND_SOC_NOPM, 0, 0, + pdmclk_div_controls), + + SND_SOC_DAPM_MUX("PDMIN1 Edge Select", SND_SOC_NOPM, 0, 0, + pdmin1_edge_controls), + SND_SOC_DAPM_MUX("PDMIN2 Edge Select", SND_SOC_NOPM, 0, 0, + pdmin2_edge_controls), + SND_SOC_DAPM_MUX("PDMIN3 Edge Select", SND_SOC_NOPM, 0, 0, + pdmin3_edge_controls), + SND_SOC_DAPM_MUX("PDMIN4 Edge Select", SND_SOC_NOPM, 0, 0, + pdmin4_edge_controls), + SND_SOC_DAPM_MUX("Decimation Filter", SND_SOC_NOPM, 0, 0, decimation_filter_controls), }; @@ -493,6 +548,20 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"}, {"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"}, + {"PDM Clk Div Select", "2.8224 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "1.4112 MHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"}, + {"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"}, + + {"PDMIN1 Edge Select", "Negative", "MIC1P Input Mux"}, + {"PDMIN1 Edge Select", "Positive", "MIC1P Input Mux"}, + {"PDMIN2 Edge Select", "Negative", "MIC2P Input Mux"}, + {"PDMIN2 Edge Select", "Positive", "MIC2P Input Mux"}, + {"PDMIN3 Edge Select", "Negative", "MIC3P Input Mux"}, + {"PDMIN3 Edge Select", "Positive", "MIC3P Input Mux"}, + {"PDMIN4 Edge Select", "Negative", "MIC4P Input Mux"}, + {"PDMIN4 Edge Select", "Positive", "MIC4P Input Mux"}, + {"MIC1 Analog Mux", "Line In", "MIC1P"}, {"MIC2 Analog Mux", "Line In", "MIC2P"}, {"MIC3 Analog Mux", "Line In", "MIC3P"}, @@ -675,11 +744,6 @@ static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai, struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); unsigned int lsb; - if (tx_mask != rx_mask) { - dev_err(component->dev, "tx and rx masks must be symmetric\n"); - return -EINVAL; - } - /* TDM based on DSP mode requires slots to be adjacent */ lsb = __ffs(tx_mask); if ((lsb + 1) != __fls(tx_mask)) { -- 2.26.2

2 3

[PATCH] ASoC: tlv320adcx140: Fix bias config values
by Dan Murphy 13 May '20

13 May '20

The device tree binding declares the ti,mic-bias-source and the ti,vref-source properties as u32. The code reads them as u8 which is incorrect. Since the device tree binding indicates them as u32 the conde needs to be updated to read u32. In addition the bias source needs to be shifted 4 bits to correctly write the register. Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tlv320adcx140.c | 13 +++++++------ sound/soc/codecs/tlv320adcx140.h | 1 + 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 0f713efde046..1d7d7b34a46e 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -739,11 +739,12 @@ static int adcx140_codec_probe(struct snd_soc_component *component) { struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); int sleep_cfg_val = ADCX140_WAKE_DEV; - u8 bias_source; - u8 vref_source; + u32 bias_source; + u32 vref_source; + u8 bias_cfg; int ret; - ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source", + ret = device_property_read_u32(adcx140->dev, "ti,mic-bias-source", &bias_source); if (ret) bias_source = ADCX140_MIC_BIAS_VAL_VREF; @@ -754,7 +755,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component) return -EINVAL; } - ret = device_property_read_u8(adcx140->dev, "ti,vref-source", + ret = device_property_read_u32(adcx140->dev, "ti,vref-source", &vref_source); if (ret) vref_source = ADCX140_MIC_BIAS_VREF_275V; @@ -765,7 +766,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component) return -EINVAL; } - bias_source |= vref_source; + bias_cfg = bias_source << ADCX140_MIC_BIAS_SHIFT | vref_source; ret = adcx140_reset(adcx140); if (ret) @@ -785,7 +786,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component) ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG, ADCX140_MIC_BIAS_VAL_MSK | - ADCX140_MIC_BIAS_VREF_MSK, bias_source); + ADCX140_MIC_BIAS_VREF_MSK, bias_cfg); if (ret) dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret); out: diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h index 6d055e55909e..69de52d473f4 100644 --- a/sound/soc/codecs/tlv320adcx140.h +++ b/sound/soc/codecs/tlv320adcx140.h @@ -116,6 +116,7 @@ #define ADCX140_MIC_BIAS_VAL_VREF_1096 1 #define ADCX140_MIC_BIAS_VAL_AVDD 6 #define ADCX140_MIC_BIAS_VAL_MSK GENMASK(6, 4) +#define ADCX140_MIC_BIAS_SHIFT 4 #define ADCX140_MIC_BIAS_VREF_275V 0 #define ADCX140_MIC_BIAS_VREF_25V 1 -- 2.26.2

2 1

[PATCH -next] ASoC: sun4i-i2s: Use PTR_ERR_OR_ZERO() to simplify code
by Samuel Zou 13 May '20

13 May '20

Fixes coccicheck warning: sound/soc/sunxi/sun4i-i2s.c:1177:1-3: WARNING: PTR_ERR_OR_ZERO can be used Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Samuel Zou <zou_wei(a)huawei.com> --- sound/soc/sunxi/sun4i-i2s.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index d0a8d58..72012a6 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -1174,10 +1174,8 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev, i2s->field_fmt_sr = devm_regmap_field_alloc(dev, i2s->regmap, i2s->variant->field_fmt_sr); - if (IS_ERR(i2s->field_fmt_sr)) - return PTR_ERR(i2s->field_fmt_sr); - return 0; + return PTR_ERR_OR_ZERO(i2s->field_fmt_sr); } static int sun4i_i2s_probe(struct platform_device *pdev) -- 2.6.2

2 1

[PATCH] ASoC: wm8962: Use force clear for WM8962_SYSCLK_ENA after reset
by Shengjiu Wang 13 May '20

13 May '20

When CLOCKING2 is non-volatile register, we need force clear the WM8962_SYSCLK_ENA bit after reset, for the value in cache maybe 0 but in hardware it is 1. Otherwise there will issue as below statement in driver. /* SYSCLK defaults to on; make sure it is off so we can safely * write to registers if the device is declocked. Fixes: c38b608504aa ("ASoC: wm8962: set CLOCKING2 as non-volatile register") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/codecs/wm8962.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 0a2cfff44441..08d19df8a700 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3798,8 +3798,8 @@ static int wm8962_runtime_resume(struct device *dev) /* SYSCLK defaults to on; make sure it is off so we can safely * write to registers if the device is declocked. */ - regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, - WM8962_SYSCLK_ENA, 0); + regmap_write_bits(wm8962->regmap, WM8962_CLOCKING2, + WM8962_SYSCLK_ENA, 0); /* Ensure we have soft control over all registers */ regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, -- 2.21.0

3 2

[PATCH 0/3] soundwire: bus_type: add sdw_master_device support
by Bard Liao 13 May '20

13 May '20

This series adds sdw master devices support. Pierre-Louis Bossart (3): soundwire: bus: rename sdw_bus_master_add/delete, add arguments soundwire: bus_type: introduce sdw_slave_type and sdw_master_type soundwire: bus_type: add sdw_master_device support .../driver-api/soundwire/summary.rst | 7 +- drivers/soundwire/Makefile | 2 +- drivers/soundwire/bus.c | 27 ++++--- drivers/soundwire/bus.h | 3 + drivers/soundwire/bus_type.c | 19 +++-- drivers/soundwire/intel.c | 9 ++- drivers/soundwire/master.c | 79 +++++++++++++++++++ drivers/soundwire/qcom.c | 7 +- drivers/soundwire/slave.c | 8 +- include/linux/soundwire/sdw.h | 22 +++++- include/linux/soundwire/sdw_type.h | 9 ++- 11 files changed, 160 insertions(+), 32 deletions(-) create mode 100644 drivers/soundwire/master.c -- 2.17.1

4 15

[V3 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 13 May '20

13 May '20

Add documentation for DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changed since V2: * No changes. Changed since V1: * Modified sample text in example .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +}; -- 2.17.1

1 0

[PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 13 May '20

13 May '20

Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1039 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 661 ++++++++++++++++++++++ 4 files changed, 1707 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..bb0c73422163 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 if I2C imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..625219b7517c --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1039 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_info(component->dev, "Tdm mode : %d\n", + max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_analog_gain_text[] = { + "Mute", "3dB", "6dB", "9dB", "12dB", "15dB", "18dB"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_spk_gain, + MAX98390_R203D_SPK_GAIN, 0, + max98390_analog_gain_text); + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + rdc0 |= rdc << 8; + ucontrol->value.integer.value[0] = rdc0; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Get dsm_calib_get not supported\n"); + + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_ENUM("Spk Gain", max98390_spk_gain), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + const char *filename; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw = NULL; + char *dsm_param = NULL; + + filename = "dsm_param.bin"; + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + dev_err(component->dev, + "Failed to acquire dsm params: %d\n", ret); + goto err; + } + + dev_info(component->dev, + "max98390: param fw size %d\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + /* Update dsm bin param */ + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_R203D_SPK_GAIN, 0x05); + regmap_write(max98390->regmap, MAX98390_MEAS_EN, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_info(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_info(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + dev_info(&i2c->dev, "ASoC: MAX98390 i2c probe\n"); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret < 0) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..34af8646187f --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,661 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; +}; +#endif -- 2.17.1

3 6

[PATCH] docs: dt: fix broken links due to txt->yaml renames
by Mauro Carvalho Chehab 13 May '20

13 May '20

There are some new broken doc links due to yaml renames at DT. Developers should really run: ./scripts/documentation-file-ref-check in order to solve those issues while submitting patches. This tool can even fix most of the issues with: ./scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> --- PS.: This patch is against today's linux-next. .../devicetree/bindings/display/bridge/sii902x.txt | 2 +- .../devicetree/bindings/display/rockchip/rockchip-drm.yaml | 2 +- .../devicetree/bindings/net/mediatek-bluetooth.txt | 2 +- .../devicetree/bindings/sound/audio-graph-card.txt | 2 +- .../devicetree/bindings/sound/st,sti-asoc-card.txt | 2 +- Documentation/mips/ingenic-tcu.rst | 2 +- MAINTAINERS | 6 +++--- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 6e14e087c0d0..0d1db3f9da84 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -37,7 +37,7 @@ Optional properties: simple-card or audio-graph-card binding. See their binding documents on how to describe the way the sii902x device is connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.txt + Documentation/devicetree/bindings/sound/simple-card.yaml Documentation/devicetree/bindings/sound/audio-graph-card.txt Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml index ec8ae742d4da..7204da5eb4c5 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml @@ -24,7 +24,7 @@ properties: description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 219bcbd0d344..9ef5bacda8c1 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices This device is a serial attached device to BTIF device and thus it must be a child node of the serial node with BTIF. The dt-bindings details for BTIF -device can be known via Documentation/devicetree/bindings/serial/8250.txt. +device can be known via Documentation/devicetree/bindings/serial/8250.yaml. Required properties: diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 269682619a70..d5f6919a2d69 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -5,7 +5,7 @@ It is based on common bindings for device graphs. see ${LINUX}/Documentation/devicetree/bindings/graph.txt Basically, Audio Graph Card property is same as Simple Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml Below are same as Simple-Card. diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 4d51f3f5ea98..a6ffcdec6f6a 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -5,7 +5,7 @@ codec or external codecs. sti sound drivers allows to expose sti SoC audio interface through the generic ASoC simple card. For details about sound card declaration please refer to -Documentation/devicetree/bindings/sound/simple-card.txt. +Documentation/devicetree/bindings/sound/simple-card.yaml. 1) sti-uniperiph-dai: audio dai device. --------------------------------------- diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst index c5a646b14450..2b75760619b4 100644 --- a/Documentation/mips/ingenic-tcu.rst +++ b/Documentation/mips/ingenic-tcu.rst @@ -68,4 +68,4 @@ and frameworks can be controlled from the same registers, all of these drivers access their registers through the same regmap. For more information regarding the devicetree bindings of the TCU drivers, -have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt. +have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.yaml. diff --git a/MAINTAINERS b/MAINTAINERS index b6ec0b3c3125..b70842425302 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3911,7 +3911,7 @@ L: linux-crypto(a)vger.kernel.org S: Supported F: drivers/char/hw_random/cctrng.c F: drivers/char/hw_random/cctrng.h -F: Documentation/devicetree/bindings/rng/arm-cctrng.txt +F: Documentation/devicetree/bindings/rng/arm-cctrng.yaml W: https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocel… CEC FRAMEWORK @@ -5446,7 +5446,7 @@ F: include/uapi/drm/r128_drm.h DRM DRIVER FOR RAYDIUM RM67191 PANELS M: Robert Chiras <robert.chiras(a)nxp.com> S: Maintained -F: Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt +F: Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml F: drivers/gpu/drm/panel/panel-raydium-rm67191.c DRM DRIVER FOR ROCKTECH JH057N00900 PANELS @@ -16294,7 +16294,7 @@ M: Hoan Tran <hoan(a)os.amperecomputing.com> M: Serge Semin <fancer.lancer(a)gmail.com> L: linux-gpio(a)vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +F: Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml F: drivers/gpio/gpio-dwapb.c SYNOPSYS DESIGNWARE AXI DMAC DRIVER -- 2.25.4

7 7

[PATCH] ASoC: topology: log all headers being parsed
by Keyon Jie 12 May '20

12 May '20

The check (tplg->pass == le32_to_cpu(hdr->type)) makes no sense as it is comparing two different enums, remove the check and log all headers that being parsed. Signed-off-by: Keyon Jie <yang.jie(a)linux.intel.com> --- sound/soc/soc-topology.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 49875978a1ce..58cf5a12af3f 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -2685,11 +2685,10 @@ static int soc_valid_header(struct soc_tplg *tplg, return -EINVAL; } - if (tplg->pass == le32_to_cpu(hdr->type)) - dev_dbg(tplg->dev, - "ASoC: Got 0x%x bytes of type %d version %d vendor %d at pass %d\n", - hdr->payload_size, hdr->type, hdr->version, - hdr->vendor_type, tplg->pass); + dev_dbg(tplg->dev, + "ASoC: Got 0x%x bytes of type %d version %d vendor %d at pass %d\n", + hdr->payload_size, hdr->type, hdr->version, + hdr->vendor_type, tplg->pass); return 1; } -- 2.20.1

2 4

[PATCH RESEND] ASoC: Intel: Skylake: Replace zero-length array with flexible-array
by Gustavo A. R. Silva 12 May '20

12 May '20

The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- sound/soc/intel/atom/sst-atom-controls.h | 2 +- sound/soc/intel/skylake/skl-i2s.h | 2 +- sound/soc/intel/skylake/skl-topology.h | 4 ++-- sound/soc/intel/skylake/skl.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/atom/sst-atom-controls.h b/sound/soc/intel/atom/sst-atom-controls.h index 5356e954a732..620b48d2a064 100644 --- a/sound/soc/intel/atom/sst-atom-controls.h +++ b/sound/soc/intel/atom/sst-atom-controls.h @@ -410,7 +410,7 @@ struct sst_cmd_set_gain_dual { struct sst_cmd_set_params { struct sst_destination_id dst; u16 command_id; - char params[0]; + char params[]; } __packed; diff --git a/sound/soc/intel/skylake/skl-i2s.h b/sound/soc/intel/skylake/skl-i2s.h index d7c15873c0d4..dfce91e11be1 100644 --- a/sound/soc/intel/skylake/skl-i2s.h +++ b/sound/soc/intel/skylake/skl-i2s.h @@ -46,7 +46,7 @@ struct skl_i2s_config_mclk { struct skl_i2s_config_mclk_ext { u32 mdivctrl; u32 mdivr_count; - u32 mdivr[0]; + u32 mdivr[]; } __packed; struct skl_i2s_config_blob_signature { diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index e967800dbb62..d2cd8ef8e97f 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -119,7 +119,7 @@ struct skl_cpr_gtw_cfg { struct skl_dma_control { u32 node_id; u32 config_length; - u32 config_data[0]; + u32 config_data[]; } __packed; struct skl_cpr_cfg { @@ -152,7 +152,7 @@ struct skl_up_down_mixer_cfg { struct skl_algo_cfg { struct skl_base_cfg base_cfg; - char params[0]; + char params[]; } __packed; struct skl_base_outfmt_cfg { diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 2bfbf59277c4..26057f38a014 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -49,7 +49,7 @@ struct skl_astate_param { struct skl_astate_config { u32 count; - struct skl_astate_param astate_table[0]; + struct skl_astate_param astate_table[]; }; struct skl_fw_config {

3 3

[PATCH] ALSA: Replace zero-length array with flexible-array
by Gustavo A. R. Silva 12 May '20

12 May '20

The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- include/sound/control.h | 2 +- include/sound/intel-nhlt.h | 6 +++--- sound/core/oss/pcm_plugin.h | 2 +- sound/usb/usx2y/usbusx2y.h | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/sound/control.h b/include/sound/control.h index 11feeee31e35..aeaed2a05bae 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -75,7 +75,7 @@ struct snd_kcontrol { unsigned long private_value; void *private_data; void (*private_free)(struct snd_kcontrol *kcontrol); - struct snd_kcontrol_volatile vd[0]; /* volatile data */ + struct snd_kcontrol_volatile vd[]; /* volatile data */ }; #define snd_kcontrol(n) list_entry(n, struct snd_kcontrol, list) diff --git a/include/sound/intel-nhlt.h b/include/sound/intel-nhlt.h index f657fd8fc0ad..743c2f442280 100644 --- a/include/sound/intel-nhlt.h +++ b/include/sound/intel-nhlt.h @@ -50,7 +50,7 @@ enum nhlt_device_type { struct nhlt_specific_cfg { u32 size; - u8 caps[0]; + u8 caps[]; } __packed; struct nhlt_fmt_cfg { @@ -60,7 +60,7 @@ struct nhlt_fmt_cfg { struct nhlt_fmt { u8 fmt_count; - struct nhlt_fmt_cfg fmt_config[0]; + struct nhlt_fmt_cfg fmt_config[]; } __packed; struct nhlt_endpoint { @@ -80,7 +80,7 @@ struct nhlt_endpoint { struct nhlt_acpi_table { struct acpi_table_header header; u8 endpoint_count; - struct nhlt_endpoint desc[0]; + struct nhlt_endpoint desc[]; } __packed; struct nhlt_resource_desc { diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h index 8d2f7a4e3ab6..46e273bd4a78 100644 --- a/sound/core/oss/pcm_plugin.h +++ b/sound/core/oss/pcm_plugin.h @@ -64,7 +64,7 @@ struct snd_pcm_plugin { char *buf; snd_pcm_uframes_t buf_frames; struct snd_pcm_plugin_channel *buf_channels; - char extra_data[0]; + char extra_data[]; }; int snd_pcm_plugin_build(struct snd_pcm_substream *handle, diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h index e0f77172ce8f..144b85f57bd2 100644 --- a/sound/usb/usx2y/usbusx2y.h +++ b/sound/usb/usx2y/usbusx2y.h @@ -18,7 +18,7 @@ struct snd_usX2Y_AsyncSeq { struct snd_usX2Y_urbSeq { int submitted; int len; - struct urb *urb[0]; + struct urb *urb[]; }; #include "usx2yhwdeppcm.h"

2 2

[PATCH] ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'
by Christophe JAILLET 12 May '20

12 May '20

If an error occurs after the call to 'omap_mcbsp_init()', the reference to 'mcbsp->fclk' must be decremented, as already done in the remove function. This can be achieved easily by using the devm_ variant of 'clk_get()' when the reference is taken in 'omap_mcbsp_init()' This fixes the leak in the probe and has the side effect to simplify both the error handling path of 'omap_mcbsp_init()' and the remove function. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- I've not been able to identify the when the issue has been introduced, so no Fixes: tag. --- sound/soc/ti/omap-mcbsp.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c index 0348963f4df7..6c83b9888467 100644 --- a/sound/soc/ti/omap-mcbsp.c +++ b/sound/soc/ti/omap-mcbsp.c @@ -686,7 +686,7 @@ static int omap_mcbsp_init(struct platform_device *pdev) mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, SNDRV_PCM_STREAM_CAPTURE); - mcbsp->fclk = clk_get(&pdev->dev, "fck"); + mcbsp->fclk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(mcbsp->fclk)) { ret = PTR_ERR(mcbsp->fclk); dev_err(mcbsp->dev, "unable to get fck: %d\n", ret); @@ -711,7 +711,7 @@ static int omap_mcbsp_init(struct platform_device *pdev) if (ret) { dev_err(mcbsp->dev, "Unable to create additional controls\n"); - goto err_thres; + return ret; } } @@ -724,8 +724,6 @@ static int omap_mcbsp_init(struct platform_device *pdev) err_st: if (mcbsp->pdata->buffer_size) sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); -err_thres: - clk_put(mcbsp->fclk); return ret; } @@ -1442,8 +1440,6 @@ static int asoc_mcbsp_remove(struct platform_device *pdev) omap_mcbsp_st_cleanup(pdev); - clk_put(mcbsp->fclk); - return 0; } -- 2.25.1

3 2

[PATCH v3] ASoC: Intel: Skylake: Update description for HDaudio kconfig
by Cezary Rojewski 12 May '20

12 May '20

With 'ASoC: Intel: Skylake: Fix HDaudio and Dmic' series applied, warning is no longer true. Remove it and update the description. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- Changes in v3: - no functional changes, made description more precise by mentioning DMIC Changes in v2: - no functional changes, removed 'or m' from description as this is a 'bool' option sound/soc/intel/Kconfig | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index c8de0bb5bed9..36f547939f0a 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -209,12 +209,8 @@ config SND_SOC_INTEL_SKYLAKE_SSP_CLK config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC bool "HDAudio codec support" help - This option broke audio on Linus' Skylake laptop in December 2018 - and the race conditions during the probe were not fixed since. - This option is DEPRECATED, all HDaudio codec support needs - to be handled by the SOF driver. - Distributions should not enable this option and there are no known - users of this capability. + If you have Intel Skylake or Kabylake with HDaudio codec + and DMIC present then enable this option by saying Y. config SND_SOC_INTEL_SKYLAKE_COMMON tristate -- 2.17.1

2 1

[PATCH] ASoC: ux500: mop500: Fix some refcounted resources issues
by Christophe JAILLET 12 May '20

12 May '20

There are 2 issues here: - if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()' is a no-op because the 'mop500_dai_links' structure has not been initialized yet, so the referenced are not decremented - The reference stored in 'mop500_dai_links[i].codecs' is refcounted only once in the probe and must be decremented only once. Fixes: 39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- sound/soc/ux500/mop500.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 2873e8e6f02b..cdae1190b930 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -63,10 +63,11 @@ static void mop500_of_node_put(void) { int i; - for (i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) of_node_put(mop500_dai_links[i].cpus->of_node); - of_node_put(mop500_dai_links[i].codecs->of_node); - } + + /* Both links use the same codec, which is refcounted only once */ + of_node_put(mop500_dai_links[0].codecs->of_node); } static int mop500_of_probe(struct platform_device *pdev, @@ -81,7 +82,9 @@ static int mop500_of_probe(struct platform_device *pdev, if (!(msp_np[0] && msp_np[1] && codec_np)) { dev_err(&pdev->dev, "Phandle missing or invalid\n"); - mop500_of_node_put(); + for (i = 0; i < 2; i++) + of_node_put(msp_np[i]); + of_node_put(codec_np); return -EINVAL; } -- 2.25.1

2 1

[PATCH v1] ASoC: rockchip-i2s: add description for rk3308
by Johan Jonker 12 May '20

12 May '20

The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-i2s", "rockchip,rk3066-i2s" for i2s nodes on a rk3308 platform to rockchip-i2s.yaml. One of the rk3308 i2s nodes also has a different dma layout, so change that as well. Signed-off-by: Johan Jonker <jbx6244(a)gmail.com> --- The rk3308 i2s nodes also contain the properties "reset-names" and "resets". Code in the manufacturer tree is not yet applied in the mainline kernel, so skip them for now. --- Documentation/devicetree/bindings/sound/rockchip-i2s.yaml | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index a3ba2186d..10f9d3ad0 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3188-i2s - rockchip,rk3228-i2s - rockchip,rk3288-i2s + - rockchip,rk3308-i2s - rockchip,rk3328-i2s - rockchip,rk3366-i2s - rockchip,rk3368-i2s @@ -47,14 +48,15 @@ properties: - const: i2s_hclk dmas: - items: - - description: TX DMA Channel - - description: RX DMA Channel + minItems: 1 + maxItems: 2 dma-names: - items: - - const: tx + oneOf: - const: rx + - items: + - const: tx + - const: rx power-domains: maxItems: 1 -- 2.11.0

2 1

[PATCH 1/2] ASoC: Intel: baytrail: Fix register access
by Amadeusz Sławiński 12 May '20

12 May '20

Baytrail has 64 bit registers, so we should use *read64* to read from it and then use proper mask values to check status. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- sound/soc/intel/baytrail/sst-baytrail-ipc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/baytrail/sst-baytrail-ipc.c b/sound/soc/intel/baytrail/sst-baytrail-ipc.c index 74274bd38f7a..34746fd871b0 100644 --- a/sound/soc/intel/baytrail/sst-baytrail-ipc.c +++ b/sound/soc/intel/baytrail/sst-baytrail-ipc.c @@ -666,8 +666,8 @@ static bool byt_is_dsp_busy(struct sst_dsp *dsp) { u64 ipcx; - ipcx = sst_dsp_shim_read_unlocked(dsp, SST_IPCX); - return (ipcx & (SST_IPCX_BUSY | SST_IPCX_DONE)); + ipcx = sst_dsp_shim_read64_unlocked(dsp, SST_IPCX); + return (ipcx & (SST_BYT_IPCX_BUSY | SST_BYT_IPCX_DONE)); } int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata) -- 2.17.1

4 6

[PATCH] ASoC: soc-dai: pull out be_hw_params_fixup from snd_soc_dai_hw_params
by Gyeongtaek Lee 12 May '20

12 May '20

When dpcm_be_dai_hw_params() called, be_hw_params_fixup() callback is called with same arguments 3times. It is called in be_hw_params_fixup() itself and in soc_pcm_hw_params() for cpu dai and codec dai. Tested in 5.4. Signed-off-by: Gyeongtaek Lee <gt82.lee(a)samsung.com> Cc: stable(a)vger.kernel.org --- sound/soc/soc-dai.c | 12 ------------ sound/soc/soc-dapm.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 12 deletions(-) diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index 31c41559034b..4785cb6b336f 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -257,20 +257,8 @@ int snd_soc_dai_hw_params(struct snd_soc_dai *dai, struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; int ret; - /* perform any topology hw_params fixups before DAI */ - if (rtd->dai_link->be_hw_params_fixup) { - ret = rtd->dai_link->be_hw_params_fixup(rtd, params); - if (ret < 0) { - dev_err(rtd->dev, - "ASoC: hw_params topology fixup failed %d\n", - ret); - return ret; - } - } - if (dai->driver->ops->hw_params) { ret = dai->driver->ops->hw_params(substream, params, dai); if (ret < 0) { diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index e2632841b321..d86c1cd4e8fa 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3886,6 +3886,17 @@ snd_soc_dai_link_event_pre_pmu(struct snd_soc_dapm_widget *w, hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max = config->channels_max; + /* perform any topology hw_params fixups before DAI */ + if (rtd->dai_link->be_hw_params_fixup) { + ret = rtd->dai_link->be_hw_params_fixup(rtd, params); + if (ret < 0) { + dev_err(rtd->dev, + "ASoC: hw_params topology fixup failed %d\n", + ret); + return ret; + } + } + substream->stream = SNDRV_PCM_STREAM_CAPTURE; snd_soc_dapm_widget_for_each_source_path(w, path) { source = path->source->priv; base-commit: f3643491bd079c973ac6c693da7966cd17506ca3 -- 2.21.0

2 3

[V2 PATCH 2/2] ASoC: max98390: Added Amplifier Driver
by Steve Lee 12 May '20

12 May '20

This is the initial amplifier driver for max98390. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Changes since v1: * updated according to Mark's comments. * updated according to Tzung-Bi's comments. * Removed Enum structure and use TLV data for Volume control sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98390.c | 1033 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98390.h | 663 ++++++++++++++++++++++ 4 files changed, 1703 insertions(+) create mode 100644 sound/soc/codecs/max98390.c create mode 100644 sound/soc/codecs/max98390.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e60e0b6a689c..93f88cd9970a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 imply SND_SOC_MAX98373 + imply SND_SOC_MAX98390 imply SND_SOC_MAX9850 imply SND_SOC_MAX9860 imply SND_SOC_MAX9759 @@ -867,6 +868,10 @@ config SND_SOC_MAX98373 tristate "Maxim Integrated MAX98373 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98390 + tristate "Maxim Integrated MAX98390 Speaker Amplifier" + depends on I2C + config SND_SOC_MAX9850 tristate depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 03533157cda6..e7c17f701529 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -115,6 +115,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98373-objs := max98373.o +snd-soc-max98390-objs := max98390.o snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o @@ -415,6 +416,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o +obj-$(CONFIG_SND_SOC_MAX98390) += snd-soc-max98390.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c new file mode 100644 index 000000000000..c12da25885e4 --- /dev/null +++ b/sound/soc/codecs/max98390.c @@ -0,0 +1,1033 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * max98390.c -- MAX98390 ALSA Soc Audio driver + * + * Copyright (C) 2020 Maxim Integrated Products + * + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98390.h" + +static struct reg_default max98390_reg_defaults[] = { + {MAX98390_INT_EN1, 0xf0}, + {MAX98390_INT_EN2, 0x00}, + {MAX98390_INT_EN3, 0x00}, + {MAX98390_INT_FLAG_CLR1, 0x00}, + {MAX98390_INT_FLAG_CLR2, 0x00}, + {MAX98390_INT_FLAG_CLR3, 0x00}, + {MAX98390_IRQ_CTRL, 0x01}, + {MAX98390_CLK_MON, 0x6d}, + {MAX98390_DAT_MON, 0x03}, + {MAX98390_WDOG_CTRL, 0x00}, + {MAX98390_WDOG_RST, 0x00}, + {MAX98390_MEAS_ADC_THERM_WARN_THRESH, 0x75}, + {MAX98390_MEAS_ADC_THERM_SHDN_THRESH, 0x8c}, + {MAX98390_MEAS_ADC_THERM_HYSTERESIS, 0x08}, + {MAX98390_PIN_CFG, 0x55}, + {MAX98390_PCM_RX_EN_A, 0x00}, + {MAX98390_PCM_RX_EN_B, 0x00}, + {MAX98390_PCM_TX_EN_A, 0x00}, + {MAX98390_PCM_TX_EN_B, 0x00}, + {MAX98390_PCM_TX_HIZ_CTRL_A, 0xff}, + {MAX98390_PCM_TX_HIZ_CTRL_B, 0xff}, + {MAX98390_PCM_CH_SRC_1, 0x00}, + {MAX98390_PCM_CH_SRC_2, 0x00}, + {MAX98390_PCM_CH_SRC_3, 0x00}, + {MAX98390_PCM_MODE_CFG, 0xc0}, + {MAX98390_PCM_MASTER_MODE, 0x1c}, + {MAX98390_PCM_CLK_SETUP, 0x44}, + {MAX98390_PCM_SR_SETUP, 0x08}, + {MAX98390_ICC_RX_EN_A, 0x00}, + {MAX98390_ICC_RX_EN_B, 0x00}, + {MAX98390_ICC_TX_EN_A, 0x00}, + {MAX98390_ICC_TX_EN_B, 0x00}, + {MAX98390_ICC_HIZ_MANUAL_MODE, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_A, 0x00}, + {MAX98390_ICC_TX_HIZ_EN_B, 0x00}, + {MAX98390_ICC_LNK_EN, 0x00}, + {MAX98390_R2039_AMP_DSP_CFG, 0x0f}, + {MAX98390_R203A_AMP_EN, 0x81}, + {MAX98390_TONE_GEN_DC_CFG, 0x00}, + {MAX98390_SPK_SRC_SEL, 0x00}, + {MAX98390_SSM_CFG, 0x85}, + {MAX98390_MEAS_EN, 0x03}, + {MAX98390_MEAS_DSP_CFG, 0x0f}, + {MAX98390_BOOST_CTRL0, 0x1c}, + {MAX98390_BOOST_CTRL3, 0x01}, + {MAX98390_BOOST_CTRL1, 0x40}, + {MAX98390_MEAS_ADC_CFG, 0x07}, + {MAX98390_MEAS_ADC_BASE_MSB, 0x00}, + {MAX98390_MEAS_ADC_BASE_LSB, 0x23}, + {MAX98390_ADC_CH0_DIVIDE, 0x00}, + {MAX98390_ADC_CH1_DIVIDE, 0x00}, + {MAX98390_ADC_CH2_DIVIDE, 0x00}, + {MAX98390_ADC_CH0_FILT_CFG, 0x00}, + {MAX98390_ADC_CH1_FILT_CFG, 0x00}, + {MAX98390_ADC_CH2_FILT_CFG, 0x00}, + {MAX98390_PWR_GATE_CTL, 0x2c}, + {MAX98390_BROWNOUT_EN, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD, 0x00}, + {MAX98390_BROWNOUT_INFINITE_HOLD_CLR, 0x00}, + {MAX98390_BROWNOUT_LVL_HOLD, 0x00}, + {MAX98390_BROWNOUT_LVL1_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL2_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL3_THRESH, 0x00}, + {MAX98390_BROWNOUT_LVL4_THRESH, 0x00}, + {MAX98390_BROWNOUT_THRESH_HYSTERYSIS, 0x00}, + {MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL, 0x1f}, + {MAX98390_BROWNOUT_AMP_GAIN_ATK_REL, 0x00}, + {MAX98390_BROWNOUT_AMP1_CLIP_MODE, 0x00}, + {MAX98390_BROWNOUT_LVL1_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL1_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL2_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL2_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL3_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL3_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_LVL4_CUR_LIMIT, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL1, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL2, 0x00}, + {MAX98390_BROWNOUT_LVL4_AMP1_CTRL3, 0x00}, + {MAX98390_BROWNOUT_ILIM_HLD, 0x00}, + {MAX98390_BROWNOUT_LIM_HLD, 0x00}, + {MAX98390_BROWNOUT_CLIP_HLD, 0x00}, + {MAX98390_BROWNOUT_GAIN_HLD, 0x00}, + {MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0f}, + {MAX98390_ENV_TRACK_BOOST_VOUT_DELAY, 0x80}, + {MAX98390_ENV_TRACK_REL_RATE, 0x07}, + {MAX98390_ENV_TRACK_HOLD_RATE, 0x07}, + {MAX98390_ENV_TRACK_CTRL, 0x01}, + {MAX98390_BOOST_BYPASS1, 0x49}, + {MAX98390_BOOST_BYPASS2, 0x2b}, + {MAX98390_BOOST_BYPASS3, 0x08}, + {MAX98390_FET_SCALING1, 0x00}, + {MAX98390_FET_SCALING2, 0x03}, + {MAX98390_FET_SCALING3, 0x00}, + {MAX98390_FET_SCALING4, 0x07}, + {MAX98390_SPK_SPEEDUP, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_1, 0x00}, + {DSMIG_WB_DRC_RELEASE_TIME_2, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_1, 0x00}, + {DSMIG_WB_DRC_ATTACK_TIME_2, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_RATIO, 0x00}, + {DSMIG_WB_DRC_COMPRESSION_THRESHOLD, 0x00}, + {DSMIG_WB_DRC_MAKEUPGAIN, 0x00}, + {DSMIG_WB_DRC_NOISE_GATE_THRESHOLD, 0x00}, + {DSMIG_WBDRC_HPF_ENABLE, 0x00}, + {DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN, 0x00}, + {DSMIG_PPR_THRESHOLD, 0x00}, + {DSM_STEREO_BASS_CHANNEL_SELECT, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE0, 0x00}, + {DSM_TPROT_THRESHOLD_BYTE1, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE0, 0x00}, + {DSM_TPROT_ROOM_TEMPERATURE_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE0, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE1, 0x00}, + {DSM_TPROT_RECIP_RDC_ROOM_BYTE2, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE0, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE1, 0x00}, + {DSM_TPROT_RECIP_TCONST_BYTE2, 0x00}, + {DSM_THERMAL_ATTENUATION_SETTINGS, 0x00}, + {DSM_THERMAL_PILOT_TONE_ATTENUATION, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE0, 0x00}, + {DSM_TPROT_PG_TEMP_THRESH_BYTE1, 0x00}, + {DSMIG_DEBUZZER_THRESHOLD, 0x00}, + {DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY, 0x08}, + {DSM_VOL_ENA, 0x20}, + {DSM_VOL_CTRL, 0xa0}, + {DSMIG_EN, 0x00}, + {MAX98390_R23E1_DSP_GLOBAL_EN, 0x00}, + {MAX98390_R23FF_GLOBAL_EN, 0x00}, +}; + +static int max98390_dsm_calibrate(struct snd_soc_component *component); + +static int max98390_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + unsigned int mode; + unsigned int format; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + mode = MAX98390_PCM_MASTER_MODE_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + max98390->master = true; + mode = MAX98390_PCM_MASTER_MODE_MASTER; + break; + default: + dev_err(component->dev, "DAI clock mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MASK, + mode); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98390_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98390_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98390_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98390_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98390_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +static int max98390_get_bclk_sel(int bclk) +{ + int i; + /* BCLKs per LRCLK */ + static int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 320, 384, 512, + }; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98390_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + /* codec MCLK rate in master mode */ + static int rate_table[] = { + 5644800, 6000000, 6144000, 6500000, + 9600000, 11289600, 12000000, 12288000, + 13000000, 19200000, + }; + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) + * snd_pcm_format_width(params_format(params)); + int value; + + if (max98390->master) { + int i; + /* match rate to closest value */ + for (i = 0; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= max98390->sysclk) + break; + } + if (i == ARRAY_SIZE(rate_table)) { + dev_err(component->dev, "failed to find proper clock rate.\n"); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MASTER_MODE, + MAX98390_PCM_MASTER_MODE_MCLK_MASK, + i << MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT); + } + + if (!max98390->tdm_mode) { + /* BCLK configuration */ + value = max98390_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + value); + } + return 0; +} + +static int max98390_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = + dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + unsigned int sampling_rate; + unsigned int chan_sz; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_8000; + break; + case 11025: + sampling_rate = MAX98390_PCM_SR_SET1_SR_11025; + break; + case 12000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_12000; + break; + case 16000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_16000; + break; + case 22050: + sampling_rate = MAX98390_PCM_SR_SET1_SR_22050; + break; + case 24000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_24000; + break; + case 32000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_32000; + break; + case 44100: + sampling_rate = MAX98390_PCM_SR_SET1_SR_44100; + break; + case 48000: + sampling_rate = MAX98390_PCM_SR_SET1_SR_48000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98390->regmap, + MAX98390_PCM_SR_SETUP, + MAX98390_PCM_SR_SET1_SR_MASK, + sampling_rate); + + return max98390_set_clock(component, params); +err: + return -EINVAL; +} + +static int max98390_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + int bsel; + unsigned int chan_sz; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98390->tdm_mode = false; + else + max98390->tdm_mode = true; + + dev_dbg(component->dev, + "Tdm mode : %d\n", max98390->tdm_mode); + + /* BCLK configuration */ + bsel = max98390_get_bclk_sel(slots * slot_width); + if (!bsel) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_CLK_SETUP, + MAX98390_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98390_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98390->regmap, + MAX98390_PCM_MODE_CFG, + MAX98390_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98390->regmap, + MAX98390_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + +static int max98390_dai_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->sysclk = freq; + return 0; +} + +static const struct snd_soc_dai_ops max98390_dai_ops = { + .set_sysclk = max98390_dai_set_sysclk, + .set_fmt = max98390_dai_set_fmt, + .hw_params = max98390_dai_hw_params, + .set_tdm_slot = max98390_dai_tdm_slot, +}; + +static int max98390_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 1); + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 1); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(max98390->regmap, + MAX98390_R23FF_GLOBAL_EN, + MAX98390_GLOBAL_EN_MASK, 0); + regmap_update_bits(max98390->regmap, + MAX98390_R203A_AMP_EN, + MAX98390_AMP_EN_MASK, 0); + break; + } + return 0; +} + +static const char * const max98390_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const char * const max98390_boost_voltage_text[] = { + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V", + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V", + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V", + "9.5V", "9.625V", "9.75V", "9.875V", "10V" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_boost_voltage, + MAX98390_BOOST_CTRL0, 0, + max98390_boost_voltage_text); + +static DECLARE_TLV_DB_SCALE(max98390_spk_tlv, 300, 300, 0); +static DECLARE_TLV_DB_SCALE(max98390_digital_tlv, -8000, 50, 0); + +static const char * const max98390_current_limit_text[] = { + "0.00A", "0.50A", "1.00A", "1.05A", "1.10A", "1.15A", "1.20A", "1.25A", + "1.30A", "1.35A", "1.40A", "1.45A", "1.50A", "1.55A", "1.60A", "1.65A", + "1.70A", "1.75A", "1.80A", "1.85A", "1.90A", "1.95A", "2.00A", "2.05A", + "2.10A", "2.15A", "2.20A", "2.25A", "2.30A", "2.35A", "2.40A", "2.45A", + "2.50A", "2.55A", "2.60A", "2.65A", "2.70A", "2.75A", "2.80A", "2.85A", + "2.90A", "2.95A", "3.00A", "3.05A", "3.10A", "3.15A", "3.20A", "3.25A", + "3.30A", "3.35A", "3.40A", "3.45A", "3.50A", "3.55A", "3.60A", "3.65A", + "3.70A", "3.75A", "3.80A", "3.85A", "3.90A", "3.95A", "4.00A", "4.05A", + "4.10A" +}; + +static SOC_ENUM_SINGLE_DECL(max98390_current_limit, + MAX98390_BOOST_CTRL1, 0, + max98390_current_limit_text); + +static int max98390_ref_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ref_rdc_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + + return 0; +} + +static int max98390_ref_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ref_rdc_value; + + return 0; +} + +static int max98390_ambient_temp_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + max98390->ambient_temp_value = ucontrol->value.integer.value[0]; + + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + + return 0; +} + +static int max98390_ambient_temp_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = max98390->ambient_temp_value; + + return 0; +} + +static int max98390_adaptive_rdc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Put adaptive rdc not supported\n"); + + return 0; +} + +static int max98390_adaptive_rdc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int rdc, rdc0; + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE0, &rdc0); + ucontrol->value.integer.value[0] = rdc0 | rdc << 8; + + return 0; +} + +static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + dev_warn(component->dev, "Get dsm_calib_get not supported\n"); + + return 0; +} + +static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + + max98390_dsm_calibrate(component); + + return 0; +} + +static const struct snd_kcontrol_new max98390_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", DSM_VOL_CTRL, + 0, 184, 0, + max98390_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98390_R203D_SPK_GAIN, + 0, 6, 0, + max98390_spk_tlv), + SOC_SINGLE("Ramp Up Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT, 1, 0), + SOC_SINGLE("Ramp Down Bypass Switch", MAX98390_R2039_AMP_DSP_CFG, + MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0), + SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3, + MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0), + SOC_ENUM("Boost Output Voltage", max98390_boost_voltage), + SOC_ENUM("Current Limit", max98390_current_limit), + SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0, + max98390_ref_rdc_get, max98390_ref_rdc_put), + SOC_SINGLE_EXT("DSM Ambient Temp", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_ambient_temp_get, max98390_ambient_temp_put), + SOC_SINGLE_EXT("DSM Adaptive Rdc", SND_SOC_NOPM, 0, 0xffff, 0, + max98390_adaptive_rdc_get, max98390_adaptive_rdc_put), + SOC_SINGLE_EXT("DSM Calibration", SND_SOC_NOPM, 0, 1, 0, + max98390_dsm_calib_get, max98390_dsm_calib_put), +}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98390_PCM_CH_SRC_1, + MAX98390_PCM_RX_CH_SRC_SHIFT, + 3, max98390_switch_text); + +static const struct snd_kcontrol_new max98390_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98390_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98390_R203A_AMP_EN, 0, 0, max98390_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, + &max98390_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98390_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static bool max98390_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_IRQ_CTRL ... MAX98390_WDOG_CTRL: + case MAX98390_MEAS_ADC_THERM_WARN_THRESH + ... MAX98390_BROWNOUT_INFINITE_HOLD: + case MAX98390_BROWNOUT_LVL_HOLD ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSMIG_DEBUZZER_THRESHOLD ... MAX98390_R24FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98390_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98390_SOFTWARE_RESET ... MAX98390_INT_EN3: + case MAX98390_MEAS_ADC_CH0_READ ... MAX98390_MEAS_ADC_CH2_READ: + case MAX98390_PWR_GATE_STATUS ... MAX98390_BROWNOUT_STATUS: + case MAX98390_BROWNOUT_LOWEST_STATUS: + case MAX98390_ENV_TRACK_BOOST_VOUT_READ: + case DSM_STBASS_HPF_B0_BYTE0 ... DSM_DEBUZZER_ATTACK_TIME_BYTE2: + case THERMAL_RDC_RD_BACK_BYTE1 ... THERMAL_COILTEMP_RD_BACK_BYTE0: + case DSM_THERMAL_GAIN ... DSM_WBDRC_GAIN: + return true; + default: + return false; + } +} + +#define MAX98390_RATES SNDRV_PCM_RATE_8000_48000 + +#define MAX98390_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver max98390_dai[] = { + { + .name = "max98390-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98390_RATES, + .formats = MAX98390_FORMATS, + }, + .ops = &max98390_dai_ops, + } +}; + +static int max98390_dsm_init(struct snd_soc_component *component) +{ + int ret; + const char *filename = "dsm_param.bin"; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + const struct firmware *fw; + char *dsm_param; + + ret = request_firmware(&fw, filename, component->dev); + if (ret) { + dev_err(component->dev, + "Failed to acquire dsm params: %d\n", ret); + goto err; + } + + dev_dbg(component->dev, + "max98390: param fw size %ld\n", + fw->size); + dsm_param = (char *)fw->data; + dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; + regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, + dsm_param, + fw->size - MAX98390_DSM_PAYLOAD_OFFSET); + release_firmware(fw); + regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); + +err: + return ret; +} + +static int max98390_dsm_calibrate(struct snd_soc_component *component) +{ + unsigned int rdc, rdc_cal_result, temp; + unsigned int rdc_integer, rdc_factor; + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); + + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE1, &rdc); + regmap_read(max98390->regmap, + THERMAL_RDC_RD_BACK_BYTE0, &rdc_cal_result); + rdc_cal_result |= (rdc << 8) & 0x0000FFFF; + if (rdc_cal_result) + max98390->ref_rdc_value = 268435456U / rdc_cal_result; + + regmap_read(max98390->regmap, MAX98390_MEAS_ADC_CH2_READ, &temp); + max98390->ambient_temp_value = temp * 52 - 1188; + + rdc_integer = rdc_cal_result * 937 / 65536; + rdc_factor = ((rdc_cal_result * 937 * 100) / 65536) + - (rdc_integer * 100); + + dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", + rdc_integer, rdc_factor, rdc_cal_result, temp); + + regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + + return 0; +} + +static int max98390_probe(struct snd_soc_component *component) +{ + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component); + + regmap_write(max98390->regmap, MAX98390_SOFTWARE_RESET, 0x01); + /* Sleep reset settle time */ + msleep(20); + /* Update dsm bin param */ + max98390_dsm_init(component); + + /* Amp Setting */ + regmap_write(max98390->regmap, MAX98390_CLK_MON, 0x6f); + regmap_write(max98390->regmap, MAX98390_PCM_RX_EN_A, 0x03); + regmap_write(max98390->regmap, MAX98390_PWR_GATE_CTL, 0x2d); + regmap_write(max98390->regmap, MAX98390_ENV_TRACK_VOUT_HEADROOM, 0x0e); + regmap_write(max98390->regmap, MAX98390_BOOST_BYPASS1, 0x46); + regmap_write(max98390->regmap, MAX98390_FET_SCALING3, 0x03); + + /* Dsm Setting */ + regmap_write(max98390->regmap, DSM_VOL_CTRL, 0x94); + regmap_write(max98390->regmap, DSMIG_EN, 0x19); + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); + if (max98390->ref_rdc_value) { + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE0, + max98390->ref_rdc_value & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE1, + (max98390->ref_rdc_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_RECIP_RDC_ROOM_BYTE2, + (max98390->ref_rdc_value >> 16) & 0x000000ff); + } + if (max98390->ambient_temp_value) { + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE1, + (max98390->ambient_temp_value >> 8) & 0x000000ff); + regmap_write(max98390->regmap, DSM_TPROT_ROOM_TEMPERATURE_BYTE0, + (max98390->ambient_temp_value) & 0x000000ff); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98390_suspend(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, true); + regcache_mark_dirty(max98390->regmap); + + return 0; +} + +static int max98390_resume(struct device *dev) +{ + struct max98390_priv *max98390 = dev_get_drvdata(dev); + + dev_dbg(dev, "%s:Enter\n", __func__); + + regcache_cache_only(max98390->regmap, false); + regcache_sync(max98390->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops max98390_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98390_suspend, max98390_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98390 = { + .probe = max98390_probe, + .controls = max98390_snd_controls, + .num_controls = ARRAY_SIZE(max98390_snd_controls), + .dapm_widgets = max98390_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98390_dapm_widgets), + .dapm_routes = max98390_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98390_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98390_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98390_R24FF_REV_ID, + .reg_defaults = max98390_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(max98390_reg_defaults), + .readable_reg = max98390_readable_register, + .volatile_reg = max98390_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id max98390_dt_ids[] = { + { .compatible = "maxim,max98390", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98390_dt_ids); +#endif + +static int max98390_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + + struct max98390_priv *max98390 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98390 = devm_kzalloc(&i2c->dev, sizeof(*max98390), GFP_KERNEL); + if (!max98390) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98390); + + ret = device_property_read_u32(&i2c->dev, "maxim,temperature_calib", + &max98390->ambient_temp_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'temperature_calib' found, default:\n"); + } + ret = device_property_read_u32(&i2c->dev, "maxim,r0_calib", + &max98390->ref_rdc_value); + if (ret) { + dev_info(&i2c->dev, + "no optional property 'r0_calib' found, default:\n"); + } + + dev_info(&i2c->dev, + "%s: r0_calib: 0x%x,temperature_calib: 0x%x", + __func__, max98390->ref_rdc_value, + max98390->ambient_temp_value); + + /* regmap initialization */ + max98390->regmap = devm_regmap_init_i2c(i2c, &max98390_regmap); + if (IS_ERR(max98390->regmap)) { + ret = PTR_ERR(max98390->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Check Revision ID */ + ret = regmap_read(max98390->regmap, + MAX98390_R24FF_REV_ID, &reg); + if (ret) { + dev_err(&i2c->dev, + "ret=%d, Failed to read: 0x%02X\n", + ret, MAX98390_R24FF_REV_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98390 revisionID: 0x%02X\n", reg); + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98390, + max98390_dai, ARRAY_SIZE(max98390_dai)); + + return ret; +} + +static const struct i2c_device_id max98390_i2c_id[] = { + { "max98390", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, max98390_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98390_of_match[] = { + { .compatible = "maxim,max98390", }, + {} +}; +MODULE_DEVICE_TABLE(of, max98390_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98390_acpi_match[] = { + { "MX98390", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98390_acpi_match); +#endif + +static struct i2c_driver max98390_i2c_driver = { + .driver = { + .name = "max98390", + .of_match_table = of_match_ptr(max98390_of_match), + .acpi_match_table = ACPI_PTR(max98390_acpi_match), + .pm = &max98390_pm, + }, + .probe = max98390_i2c_probe, + .id_table = max98390_i2c_id, +}; + +module_i2c_driver(max98390_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98390 driver"); +MODULE_AUTHOR("Steve Lee <steves.lee(a)maximintegrated.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h new file mode 100644 index 000000000000..f59cb114d957 --- /dev/null +++ b/sound/soc/codecs/max98390.h @@ -0,0 +1,663 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, Maxim Integrated. + */ + +#ifndef _MAX98390_H +#define _MAX98390_H + +/* MAX98390 Register Address */ +#define MAX98390_SOFTWARE_RESET 0x2000 +#define MAX98390_INT_RAW1 0x2002 +#define MAX98390_INT_RAW2 0x2003 +#define MAX98390_INT_RAW3 0x2004 +#define MAX98390_INT_STATE1 0x2005 +#define MAX98390_INT_STATE2 0x2006 +#define MAX98390_INT_STATE3 0x2007 +#define MAX98390_INT_FLAG1 0x2008 +#define MAX98390_INT_FLAG2 0x2009 +#define MAX98390_INT_FLAG3 0x200a +#define MAX98390_INT_EN1 0x200b +#define MAX98390_INT_EN2 0x200c +#define MAX98390_INT_EN3 0x200d +#define MAX98390_INT_FLAG_CLR1 0x200e +#define MAX98390_INT_FLAG_CLR2 0x200f +#define MAX98390_INT_FLAG_CLR3 0x2010 +#define MAX98390_IRQ_CTRL 0x2011 +#define MAX98390_CLK_MON 0x2012 +#define MAX98390_DAT_MON 0x2014 +#define MAX98390_WDOG_CTRL 0x2015 +#define MAX98390_WDOG_RST 0x2016 +#define MAX98390_MEAS_ADC_THERM_WARN_THRESH 0x2017 +#define MAX98390_MEAS_ADC_THERM_SHDN_THRESH 0x2018 +#define MAX98390_MEAS_ADC_THERM_HYSTERESIS 0x2019 +#define MAX98390_PIN_CFG 0x201a +#define MAX98390_PCM_RX_EN_A 0x201b +#define MAX98390_PCM_RX_EN_B 0x201c +#define MAX98390_PCM_TX_EN_A 0x201d +#define MAX98390_PCM_TX_EN_B 0x201e +#define MAX98390_PCM_TX_HIZ_CTRL_A 0x201f +#define MAX98390_PCM_TX_HIZ_CTRL_B 0x2020 +#define MAX98390_PCM_CH_SRC_1 0x2021 +#define MAX98390_PCM_CH_SRC_2 0x2022 +#define MAX98390_PCM_CH_SRC_3 0x2023 +#define MAX98390_PCM_MODE_CFG 0x2024 +#define MAX98390_PCM_MASTER_MODE 0x2025 +#define MAX98390_PCM_CLK_SETUP 0x2026 +#define MAX98390_PCM_SR_SETUP 0x2027 +#define MAX98390_ICC_RX_EN_A 0x202c +#define MAX98390_ICC_RX_EN_B 0x202d +#define MAX98390_ICC_TX_EN_A 0x202e +#define MAX98390_ICC_TX_EN_B 0x202f +#define MAX98390_ICC_HIZ_MANUAL_MODE 0x2030 +#define MAX98390_ICC_TX_HIZ_EN_A 0x2031 +#define MAX98390_ICC_TX_HIZ_EN_B 0x2032 +#define MAX98390_ICC_LNK_EN 0x2033 +#define MAX98390_R2039_AMP_DSP_CFG 0x2039 +#define MAX98390_R203A_AMP_EN 0x203a +#define MAX98390_TONE_GEN_DC_CFG 0x203b +#define MAX98390_SPK_SRC_SEL 0x203c +#define MAX98390_R203D_SPK_GAIN 0x203d +#define MAX98390_SSM_CFG 0x203e +#define MAX98390_MEAS_EN 0x203f +#define MAX98390_MEAS_DSP_CFG 0x2040 +#define MAX98390_BOOST_CTRL0 0x2041 +#define MAX98390_BOOST_CTRL3 0x2042 +#define MAX98390_BOOST_CTRL1 0x2043 +#define MAX98390_MEAS_ADC_CFG 0x2044 +#define MAX98390_MEAS_ADC_BASE_MSB 0x2045 +#define MAX98390_MEAS_ADC_BASE_LSB 0x2046 +#define MAX98390_ADC_CH0_DIVIDE 0x2047 +#define MAX98390_ADC_CH1_DIVIDE 0x2048 +#define MAX98390_ADC_CH2_DIVIDE 0x2049 +#define MAX98390_ADC_CH0_FILT_CFG 0x204a +#define MAX98390_ADC_CH1_FILT_CFG 0x204b +#define MAX98390_ADC_CH2_FILT_CFG 0x204c +#define MAX98390_MEAS_ADC_CH0_READ 0x204d +#define MAX98390_MEAS_ADC_CH1_READ 0x204e +#define MAX98390_MEAS_ADC_CH2_READ 0x204f +#define MAX98390_PWR_GATE_CTL 0x2050 +#define MAX98390_PWR_GATE_STATUS 0x2051 +#define MAX98390_VBAT_LOW_STATUS 0x2052 +#define MAX98390_PVDD_LOW_STATUS 0x2053 +#define MAX98390_BROWNOUT_STATUS 0x2054 +#define MAX98390_BROWNOUT_EN 0x2055 +#define MAX98390_BROWNOUT_INFINITE_HOLD 0x2056 +#define MAX98390_BROWNOUT_INFINITE_HOLD_CLR 0x2057 +#define MAX98390_BROWNOUT_LVL_HOLD 0x2058 +#define MAX98390_BROWNOUT_LVL1_THRESH 0x2059 +#define MAX98390_BROWNOUT_LVL2_THRESH 0x205a +#define MAX98390_BROWNOUT_LVL3_THRESH 0x205b +#define MAX98390_BROWNOUT_LVL4_THRESH 0x205c +#define MAX98390_BROWNOUT_THRESH_HYSTERYSIS 0x205d +#define MAX98390_BROWNOUT_AMP_LIMITER_ATK_REL 0x205e +#define MAX98390_BROWNOUT_AMP_GAIN_ATK_REL 0x205f +#define MAX98390_BROWNOUT_AMP1_CLIP_MODE 0x2060 +#define MAX98390_BROWNOUT_LVL1_CUR_LIMIT 0x2061 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL1 0x2062 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL2 0x2063 +#define MAX98390_BROWNOUT_LVL1_AMP1_CTRL3 0x2064 +#define MAX98390_BROWNOUT_LVL2_CUR_LIMIT 0x2065 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL1 0x2066 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL2 0x2067 +#define MAX98390_BROWNOUT_LVL2_AMP1_CTRL3 0x2068 +#define MAX98390_BROWNOUT_LVL3_CUR_LIMIT 0x2069 +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL1 0x206a +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL2 0x206b +#define MAX98390_BROWNOUT_LVL3_AMP1_CTRL3 0x206c +#define MAX98390_BROWNOUT_LVL4_CUR_LIMIT 0x206d +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL1 0x206e +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL2 0x206f +#define MAX98390_BROWNOUT_LVL4_AMP1_CTRL3 0x2070 +#define MAX98390_BROWNOUT_LOWEST_STATUS 0x2071 +#define MAX98390_BROWNOUT_ILIM_HLD 0x2072 +#define MAX98390_BROWNOUT_LIM_HLD 0x2073 +#define MAX98390_BROWNOUT_CLIP_HLD 0x2074 +#define MAX98390_BROWNOUT_GAIN_HLD 0x2075 +#define MAX98390_ENV_TRACK_VOUT_HEADROOM 0x2076 +#define MAX98390_ENV_TRACK_BOOST_VOUT_DELAY 0x2077 +#define MAX98390_ENV_TRACK_REL_RATE 0x2078 +#define MAX98390_ENV_TRACK_HOLD_RATE 0x2079 +#define MAX98390_ENV_TRACK_CTRL 0x207a +#define MAX98390_ENV_TRACK_BOOST_VOUT_READ 0x207b +#define MAX98390_BOOST_BYPASS1 0x207c +#define MAX98390_BOOST_BYPASS2 0x207d +#define MAX98390_BOOST_BYPASS3 0x207e +#define MAX98390_FET_SCALING1 0x207f +#define MAX98390_FET_SCALING2 0x2080 +#define MAX98390_FET_SCALING3 0x2081 +#define MAX98390_FET_SCALING4 0x2082 +#define MAX98390_SPK_SPEEDUP 0x2084 + +#define DSM_STBASS_HPF_B0_BYTE0 0x2101 +#define DSM_STBASS_HPF_B0_BYTE1 0x2102 +#define DSM_STBASS_HPF_B0_BYTE2 0x2103 +#define DSM_STBASS_HPF_B1_BYTE0 0x2105 +#define DSM_STBASS_HPF_B1_BYTE1 0x2106 +#define DSM_STBASS_HPF_B1_BYTE2 0x2107 +#define DSM_STBASS_HPF_B2_BYTE0 0x2109 +#define DSM_STBASS_HPF_B2_BYTE1 0x210a +#define DSM_STBASS_HPF_B2_BYTE2 0x210b +#define DSM_STBASS_HPF_A1_BYTE0 0x210d +#define DSM_STBASS_HPF_A1_BYTE1 0x210e +#define DSM_STBASS_HPF_A1_BYTE2 0x210f +#define DSM_STBASS_HPF_A2_BYTE0 0x2111 +#define DSM_STBASS_HPF_A2_BYTE1 0x2112 +#define DSM_STBASS_HPF_A2_BYTE2 0x2113 +#define DSM_STBASS_LPF_B0_BYTE0 0x2115 +#define DSM_STBASS_LPF_B0_BYTE1 0x2116 +#define DSM_STBASS_LPF_B0_BYTE2 0x2117 +#define DSM_STBASS_LPF_B1_BYTE0 0x2119 +#define DSM_STBASS_LPF_B1_BYTE1 0x211a +#define DSM_STBASS_LPF_B1_BYTE2 0x211b +#define DSM_STBASS_LPF_B2_BYTE0 0x211d +#define DSM_STBASS_LPF_B2_BYTE1 0x211e +#define DSM_STBASS_LPF_B2_BYTE2 0x211f +#define DSM_STBASS_LPF_A1_BYTE0 0x2121 +#define DSM_STBASS_LPF_A1_BYTE1 0x2122 +#define DSM_STBASS_LPF_A1_BYTE2 0x2123 +#define DSM_STBASS_LPF_A2_BYTE0 0x2125 +#define DSM_STBASS_LPF_A2_BYTE1 0x2126 +#define DSM_STBASS_LPF_A2_BYTE2 0x2127 +#define DSM_EQ_BQ1_B0_BYTE0 0x2129 +#define DSM_EQ_BQ1_B0_BYTE1 0x212a +#define DSM_EQ_BQ1_B0_BYTE2 0x212b +#define DSM_EQ_BQ1_B1_BYTE0 0x212d +#define DSM_EQ_BQ1_B1_BYTE1 0x212e +#define DSM_EQ_BQ1_B1_BYTE2 0x212f +#define DSM_EQ_BQ1_B2_BYTE0 0x2131 +#define DSM_EQ_BQ1_B2_BYTE1 0x2132 +#define DSM_EQ_BQ1_B2_BYTE2 0x2133 +#define DSM_EQ_BQ1_A1_BYTE0 0x2135 +#define DSM_EQ_BQ1_A1_BYTE1 0x2136 +#define DSM_EQ_BQ1_A1_BYTE2 0x2137 +#define DSM_EQ_BQ1_A2_BYTE0 0x2139 +#define DSM_EQ_BQ1_A2_BYTE1 0x213a +#define DSM_EQ_BQ1_A2_BYTE2 0x213b +#define DSM_EQ_BQ2_B0_BYTE0 0x213d +#define DSM_EQ_BQ2_B0_BYTE1 0x213e +#define DSM_EQ_BQ2_B0_BYTE2 0x213f +#define DSM_EQ_BQ2_B1_BYTE0 0x2141 +#define DSM_EQ_BQ2_B1_BYTE1 0x2142 +#define DSM_EQ_BQ2_B1_BYTE2 0x2143 +#define DSM_EQ_BQ2_B2_BYTE0 0x2145 +#define DSM_EQ_BQ2_B2_BYTE1 0x2146 +#define DSM_EQ_BQ2_B2_BYTE2 0x2147 +#define DSM_EQ_BQ2_A1_BYTE0 0x2149 +#define DSM_EQ_BQ2_A1_BYTE1 0x214a +#define DSM_EQ_BQ2_A1_BYTE2 0x214b +#define DSM_EQ_BQ2_A2_BYTE0 0x214d +#define DSM_EQ_BQ2_A2_BYTE1 0x214e +#define DSM_EQ_BQ2_A2_BYTE2 0x214f +#define DSM_EQ_BQ3_B0_BYTE0 0x2151 +#define DSM_EQ_BQ3_B0_BYTE1 0x2152 +#define DSM_EQ_BQ3_B0_BYTE2 0x2153 +#define DSM_EQ_BQ3_B1_BYTE0 0x2155 +#define DSM_EQ_BQ3_B1_BYTE1 0x2156 +#define DSM_EQ_BQ3_B1_BYTE2 0x2157 +#define DSM_EQ_BQ3_B2_BYTE0 0x2159 +#define DSM_EQ_BQ3_B2_BYTE1 0x215a +#define DSM_EQ_BQ3_B2_BYTE2 0x215b +#define DSM_EQ_BQ3_A1_BYTE0 0x215d +#define DSM_EQ_BQ3_A1_BYTE1 0x215e +#define DSM_EQ_BQ3_A1_BYTE2 0x215f +#define DSM_EQ_BQ3_A2_BYTE0 0x2161 +#define DSM_EQ_BQ3_A2_BYTE1 0x2162 +#define DSM_EQ_BQ3_A2_BYTE2 0x2163 +#define DSM_EQ_BQ4_B0_BYTE0 0x2165 +#define DSM_EQ_BQ4_B0_BYTE1 0x2166 +#define DSM_EQ_BQ4_B0_BYTE2 0x2167 +#define DSM_EQ_BQ4_B1_BYTE0 0x2169 +#define DSM_EQ_BQ4_B1_BYTE1 0x216a +#define DSM_EQ_BQ4_B1_BYTE2 0x216b +#define DSM_EQ_BQ4_B2_BYTE0 0x216d +#define DSM_EQ_BQ4_B2_BYTE1 0x216e +#define DSM_EQ_BQ4_B2_BYTE2 0x216f +#define DSM_EQ_BQ4_A1_BYTE0 0x2171 +#define DSM_EQ_BQ4_A1_BYTE1 0x2172 +#define DSM_EQ_BQ4_A1_BYTE2 0x2173 +#define DSM_EQ_BQ4_A2_BYTE0 0x2175 +#define DSM_EQ_BQ4_A2_BYTE1 0x2176 +#define DSM_EQ_BQ4_A2_BYTE2 0x2177 +#define DSM_EQ_BQ5_B0_BYTE0 0x2179 +#define DSM_EQ_BQ5_B0_BYTE1 0x217a +#define DSM_EQ_BQ5_B0_BYTE2 0x217b +#define DSM_EQ_BQ5_B1_BYTE0 0x217d +#define DSM_EQ_BQ5_B1_BYTE1 0x217e +#define DSM_EQ_BQ5_B1_BYTE2 0x217f +#define DSM_EQ_BQ5_B2_BYTE0 0x2181 +#define DSM_EQ_BQ5_B2_BYTE1 0x2182 +#define DSM_EQ_BQ5_B2_BYTE2 0x2183 +#define DSM_EQ_BQ5_A1_BYTE0 0x2185 +#define DSM_EQ_BQ5_A1_BYTE1 0x2186 +#define DSM_EQ_BQ5_A1_BYTE2 0x2187 +#define DSM_EQ_BQ5_A2_BYTE0 0x2189 +#define DSM_EQ_BQ5_A2_BYTE1 0x218a +#define DSM_EQ_BQ5_A2_BYTE2 0x218b +#define DSM_EQ_BQ6_B0_BYTE0 0x218d +#define DSM_EQ_BQ6_B0_BYTE1 0x218e +#define DSM_EQ_BQ6_B0_BYTE2 0x218f +#define DSM_EQ_BQ6_B1_BYTE0 0x2191 +#define DSM_EQ_BQ6_B1_BYTE1 0x2192 +#define DSM_EQ_BQ6_B1_BYTE2 0x2193 +#define DSM_EQ_BQ6_B2_BYTE0 0x2195 +#define DSM_EQ_BQ6_B2_BYTE1 0x2196 +#define DSM_EQ_BQ6_B2_BYTE2 0x2197 +#define DSM_EQ_BQ6_A1_BYTE0 0x2199 +#define DSM_EQ_BQ6_A1_BYTE1 0x219a +#define DSM_EQ_BQ6_A1_BYTE2 0x219b +#define DSM_EQ_BQ6_A2_BYTE0 0x219d +#define DSM_EQ_BQ6_A2_BYTE1 0x219e +#define DSM_EQ_BQ6_A2_BYTE2 0x219f +#define DSM_EQ_BQ7_B0_BYTE0 0x21a1 +#define DSM_EQ_BQ7_B0_BYTE1 0x21a2 +#define DSM_EQ_BQ7_B0_BYTE2 0x21a3 +#define DSM_EQ_BQ7_B1_BYTE0 0x21a5 +#define DSM_EQ_BQ7_B1_BYTE1 0x21a6 +#define DSM_EQ_BQ7_B1_BYTE2 0x21a7 +#define DSM_EQ_BQ7_B2_BYTE0 0x21a9 +#define DSM_EQ_BQ7_B2_BYTE1 0x21aa +#define DSM_EQ_BQ7_B2_BYTE2 0x21ab +#define DSM_EQ_BQ7_A1_BYTE0 0x21ad +#define DSM_EQ_BQ7_A1_BYTE1 0x21ae +#define DSM_EQ_BQ7_A1_BYTE2 0x21af +#define DSM_EQ_BQ7_A2_BYTE0 0x21b1 +#define DSM_EQ_BQ7_A2_BYTE1 0x21b2 +#define DSM_EQ_BQ7_A2_BYTE2 0x21b3 +#define DSM_EQ_BQ8_B0_BYTE0 0x21b5 +#define DSM_EQ_BQ8_B0_BYTE1 0x21b6 +#define DSM_EQ_BQ8_B0_BYTE2 0x21b7 +#define DSM_EQ_BQ8_B1_BYTE0 0x21b9 +#define DSM_EQ_BQ8_B1_BYTE1 0x21ba +#define DSM_EQ_BQ8_B1_BYTE2 0x21bb +#define DSM_EQ_BQ8_B2_BYTE0 0x21bd +#define DSM_EQ_BQ8_B2_BYTE1 0x21be +#define DSM_EQ_BQ8_B2_BYTE2 0x21bf +#define DSM_EQ_BQ8_A1_BYTE0 0x21c1 +#define DSM_EQ_BQ8_A1_BYTE1 0x21c2 +#define DSM_EQ_BQ8_A1_BYTE2 0x21c3 +#define DSM_EQ_BQ8_A2_BYTE0 0x21c5 +#define DSM_EQ_BQ8_A2_BYTE1 0x21c6 +#define DSM_EQ_BQ8_A2_BYTE2 0x21c7 +#define DSM_LFX_BQ_B0_BYTE0 0x21c9 +#define DSM_LFX_BQ_B0_BYTE1 0x21ca +#define DSM_LFX_BQ_B0_BYTE2 0x21cb +#define DSM_LFX_BQ_B1_BYTE0 0x21cd +#define DSM_LFX_BQ_B1_BYTE1 0x21ce +#define DSM_LFX_BQ_B1_BYTE2 0x21cf +#define DSM_LFX_BQ_B2_BYTE0 0x21d1 +#define DSM_LFX_BQ_B2_BYTE1 0x21d2 +#define DSM_LFX_BQ_B2_BYTE2 0x21d3 +#define DSM_LFX_BQ_A1_BYTE0 0x21d5 +#define DSM_LFX_BQ_A1_BYTE1 0x21d6 +#define DSM_LFX_BQ_A1_BYTE2 0x21d7 +#define DSM_LFX_BQ_A2_BYTE0 0x21d9 +#define DSM_LFX_BQ_A2_BYTE1 0x21da +#define DSM_LFX_BQ_A2_BYTE2 0x21db +#define DSM_PPR_HPF_B0_BYTE0 0x21dd +#define DSM_PPR_HPF_B0_BYTE1 0x21de +#define DSM_PPR_HPF_B0_BYTE2 0x21df +#define DSM_PPR_HPF_B1_BYTE0 0x21e1 +#define DSM_PPR_HPF_B1_BYTE1 0x21e2 +#define DSM_PPR_HPF_B1_BYTE2 0x21e3 +#define DSM_PPR_HPF_B2_BYTE0 0x21e5 +#define DSM_PPR_HPF_B2_BYTE1 0x21e6 +#define DSM_PPR_HPF_B2_BYTE2 0x21e7 +#define DSM_PPR_HPF_A1_BYTE0 0x21e9 +#define DSM_PPR_HPF_A1_BYTE1 0x21ea +#define DSM_PPR_HPF_A1_BYTE2 0x21eb +#define DSM_PPR_HPF_A2_BYTE0 0x21ed +#define DSM_PPR_HPF_A2_BYTE1 0x21ee +#define DSM_PPR_HPF_A2_BYTE2 0x21ef +#define DSM_PPR_LPF_B0_BYTE0 0x21f1 +#define DSM_PPR_LPF_B0_BYTE1 0x21f2 +#define DSM_PPR_LPF_B0_BYTE2 0x21f3 +#define DSM_PPR_LPF_B1_BYTE0 0x21f5 +#define DSM_PPR_LPF_B1_BYTE1 0x21f6 +#define DSM_PPR_LPF_B1_BYTE2 0x21f7 +#define DSM_PPR_LPF_B2_BYTE0 0x21f9 +#define DSM_PPR_LPF_B2_BYTE1 0x21fa +#define DSM_PPR_LPF_B2_BYTE2 0x21fb +#define DSM_PPR_LPF_A1_BYTE0 0x21fd +#define DSM_PPR_LPF_A1_BYTE1 0x21fe +#define DSM_PPR_LPF_A1_BYTE2 0x21ff +#define DSM_PPR_LPF_A2_BYTE0 0x2201 +#define DSM_PPR_LPF_A2_BYTE1 0x2202 +#define DSM_PPR_LPF_A2_BYTE2 0x2203 +#define DSM_SPL_BQ_B0_BYTE0 0x2205 +#define DSM_SPL_BQ_B0_BYTE1 0x2206 +#define DSM_SPL_BQ_B0_BYTE2 0x2207 +#define DSM_SPL_BQ_B1_BYTE0 0x2209 +#define DSM_SPL_BQ_B1_BYTE1 0x220a +#define DSM_SPL_BQ_B1_BYTE2 0x220b +#define DSM_SPL_BQ_B2_BYTE0 0x220d +#define DSM_SPL_BQ_B2_BYTE1 0x220e +#define DSM_SPL_BQ_B2_BYTE2 0x220f +#define DSM_SPL_BQ_A1_BYTE0 0x2211 +#define DSM_SPL_BQ_A1_BYTE1 0x2212 +#define DSM_SPL_BQ_A1_BYTE2 0x2213 +#define DSM_SPL_BQ_A2_BYTE0 0x2215 +#define DSM_SPL_BQ_A2_BYTE1 0x2216 +#define DSM_SPL_BQ_A2_BYTE2 0x2217 +#define DSM_EXCUR_BQ_B0_BYTE0 0x2219 +#define DSM_EXCUR_BQ_B0_BYTE1 0x221a +#define DSM_EXCUR_BQ_B0_BYTE2 0x221b +#define DSM_EXCUR_BQ_B1_BYTE0 0x221d +#define DSM_EXCUR_BQ_B1_BYTE1 0x221e +#define DSM_EXCUR_BQ_B1_BYTE2 0x221f +#define DSM_EXCUR_BQ_B2_BYTE0 0x2221 +#define DSM_EXCUR_BQ_B2_BYTE1 0x2222 +#define DSM_EXCUR_BQ_B2_BYTE2 0x2223 +#define DSM_EXCUR_BQ_A1_BYTE0 0x2225 +#define DSM_EXCUR_BQ_A1_BYTE1 0x2226 +#define DSM_EXCUR_BQ_A1_BYTE2 0x2227 +#define DSM_EXCUR_BQ_A2_BYTE0 0x2229 +#define DSM_EXCUR_BQ_A2_BYTE1 0x222a +#define DSM_EXCUR_BQ_A2_BYTE2 0x222b +#define DSM_EXCPROT_HPF1_B0_BYTE0 0x222d +#define DSM_EXCPROT_HPF1_B0_BYTE1 0x222e +#define DSM_EXCPROT_HPF1_B0_BYTE2 0x222f +#define DSM_EXCPROT_HPF1_B1_BYTE0 0x2231 +#define DSM_EXCPROT_HPF1_B1_BYTE1 0x2232 +#define DSM_EXCPROT_HPF1_B1_BYTE2 0x2233 +#define DSM_EXCPROT_HPF1_B2_BYTE0 0x2235 +#define DSM_EXCPROT_HPF1_B2_BYTE1 0x2236 +#define DSM_EXCPROT_HPF1_B2_BYTE2 0x2237 +#define DSM_EXCPROT_HPF1_A1_BYTE0 0x2239 +#define DSM_EXCPROT_HPF1_A1_BYTE1 0x223a +#define DSM_EXCPROT_HPF1_A1_BYTE2 0x223b +#define DSM_EXCPROT_HPF1_A2_BYTE0 0x223d +#define DSM_EXCPROT_HPF1_A2_BYTE1 0x223e +#define DSM_EXCPROT_HPF1_A2_BYTE2 0x223f +#define DSM_EXCPROT_HPF2_B0_BYTE0 0x2241 +#define DSM_EXCPROT_HPF2_B0_BYTE1 0x2242 +#define DSM_EXCPROT_HPF2_B0_BYTE2 0x2243 +#define DSM_EXCPROT_HPF2_B1_BYTE0 0x2245 +#define DSM_EXCPROT_HPF2_B1_BYTE1 0x2246 +#define DSM_EXCPROT_HPF2_B1_BYTE2 0x2247 +#define DSM_EXCPROT_HPF2_B2_BYTE0 0x2249 +#define DSM_EXCPROT_HPF2_B2_BYTE1 0x224a +#define DSM_EXCPROT_HPF2_B2_BYTE2 0x224b +#define DSM_EXCPROT_HPF2_A1_BYTE0 0x224d +#define DSM_EXCPROT_HPF2_A1_BYTE1 0x224e +#define DSM_EXCPROT_HPF2_A1_BYTE2 0x224f +#define DSM_EXCPROT_HPF2_A2_BYTE0 0x2251 +#define DSM_EXCPROT_HPF2_A2_BYTE1 0x2252 +#define DSM_EXCPROT_HPF2_A2_BYTE2 0x2253 +#define DSM_EXCPROT_HPF3_B0_BYTE0 0x2255 +#define DSM_EXCPROT_HPF3_B0_BYTE1 0x2256 +#define DSM_EXCPROT_HPF3_B0_BYTE2 0x2257 +#define DSM_EXCPROT_HPF3_B1_BYTE0 0x2259 +#define DSM_EXCPROT_HPF3_B1_BYTE1 0x225a +#define DSM_EXCPROT_HPF3_B1_BYTE2 0x225b +#define DSM_EXCPROT_HPF3_B2_BYTE0 0x225d +#define DSM_EXCPROT_HPF3_B2_BYTE1 0x225e +#define DSM_EXCPROT_HPF3_B2_BYTE2 0x225f +#define DSM_EXCPROT_HPF3_A1_BYTE0 0x2261 +#define DSM_EXCPROT_HPF3_A1_BYTE1 0x2262 +#define DSM_EXCPROT_HPF3_A1_BYTE2 0x2263 +#define DSM_EXCPROT_HPF3_A2_BYTE0 0x2265 +#define DSM_EXCPROT_HPF3_A2_BYTE1 0x2266 +#define DSM_EXCPROT_HPF3_A2_BYTE2 0x2267 +#define DSM_EXCPROT_HPF4_B0_BYTE0 0x2269 +#define DSM_EXCPROT_HPF4_B0_BYTE1 0x226a +#define DSM_EXCPROT_HPF4_B0_BYTE2 0x226b +#define DSM_EXCPROT_HPF4_B1_BYTE0 0x226d +#define DSM_EXCPROT_HPF4_B1_BYTE1 0x226e +#define DSM_EXCPROT_HPF4_B1_BYTE2 0x226f +#define DSM_EXCPROT_HPF4_B2_BYTE0 0x2271 +#define DSM_EXCPROT_HPF4_B2_BYTE1 0x2272 +#define DSM_EXCPROT_HPF4_B2_BYTE2 0x2273 +#define DSM_EXCPROT_HPF4_A1_BYTE0 0x2275 +#define DSM_EXCPROT_HPF4_A1_BYTE1 0x2276 +#define DSM_EXCPROT_HPF4_A1_BYTE2 0x2277 +#define DSM_EXCPROT_HPF4_A2_BYTE0 0x2279 +#define DSM_EXCPROT_HPF4_A2_BYTE1 0x227a +#define DSM_EXCPROT_HPF4_A2_BYTE2 0x227b +#define DSM_EXCPROT_HPF5_B0_BYTE0 0x227d +#define DSM_EXCPROT_HPF5_B0_BYTE1 0x227e +#define DSM_EXCPROT_HPF5_B0_BYTE2 0x227f +#define DSM_EXCPROT_HPF5_B1_BYTE0 0x2281 +#define DSM_EXCPROT_HPF5_B1_BYTE1 0x2282 +#define DSM_EXCPROT_HPF5_B1_BYTE2 0x2283 +#define DSM_EXCPROT_HPF5_B2_BYTE0 0x2285 +#define DSM_EXCPROT_HPF5_B2_BYTE1 0x2286 +#define DSM_EXCPROT_HPF5_B2_BYTE2 0x2287 +#define DSM_EXCPROT_HPF5_A1_BYTE0 0x2289 +#define DSM_EXCPROT_HPF5_A1_BYTE1 0x228a +#define DSM_EXCPROT_HPF5_A1_BYTE2 0x228b +#define DSM_EXCPROT_HPF5_A2_BYTE0 0x228d +#define DSM_EXCPROT_HPF5_A2_BYTE1 0x228e +#define DSM_EXCPROT_HPF5_A2_BYTE2 0x228f +#define DSM_DEBUZZ_BPF_B0_BYTE0 0x2291 +#define DSM_DEBUZZ_BPF_B0_BYTE1 0x2292 +#define DSM_DEBUZZ_BPF_B0_BYTE2 0x2293 +#define DSM_DEBUZZ_BPF_B1_BYTE0 0x2295 +#define DSM_DEBUZZ_BPF_B1_BYTE1 0x2296 +#define DSM_DEBUZZ_BPF_B1_BYTE2 0x2297 +#define DSM_DEBUZZ_BPF_B2_BYTE0 0x2299 +#define DSM_DEBUZZ_BPF_B2_BYTE1 0x229a +#define DSM_DEBUZZ_BPF_B2_BYTE2 0x229b +#define DSM_DEBUZZ_BPF_A1_BYTE0 0x229d +#define DSM_DEBUZZ_BPF_A1_BYTE1 0x229e +#define DSM_DEBUZZ_BPF_A1_BYTE2 0x229f +#define DSM_DEBUZZ_BPF_A2_BYTE0 0x22a1 +#define DSM_DEBUZZ_BPF_A2_BYTE1 0x22a2 +#define DSM_DEBUZZ_BPF_A2_BYTE2 0x22a3 +#define DSM_DEBUZZ_PORT_B0_BYTE0 0x22a5 +#define DSM_DEBUZZ_PORT_B0_BYTE1 0x22a6 +#define DSM_DEBUZZ_PORT_B0_BYTE2 0x22a7 +#define DSM_DEBUZZ_PORT_B1_BYTE0 0x22a9 +#define DSM_DEBUZZ_PORT_B1_BYTE1 0x22aa +#define DSM_DEBUZZ_PORT_B1_BYTE2 0x22ab +#define DSM_DEBUZZ_PORT_B2_BYTE0 0x22ad +#define DSM_DEBUZZ_PORT_B2_BYTE1 0x22ae +#define DSM_DEBUZZ_PORT_B2_BYTE2 0x22af +#define DSM_DEBUZZ_PORT_A1_BYTE0 0x22b1 +#define DSM_DEBUZZ_PORT_A1_BYTE1 0x22b2 +#define DSM_DEBUZZ_PORT_A1_BYTE2 0x22b3 +#define DSM_DEBUZZ_PORT_A2_BYTE0 0x22b5 +#define DSM_DEBUZZ_PORT_A2_BYTE1 0x22b6 +#define DSM_DEBUZZ_PORT_A2_BYTE2 0x22b7 +#define DSM_DEBUZZ_NOTCH_B0_BYTE0 0x22b9 +#define DSM_DEBUZZ_NOTCH_B0_BYTE1 0x22ba +#define DSM_DEBUZZ_NOTCH_B0_BYTE2 0x22bb +#define DSM_DEBUZZ_NOTCH_B1_BYTE0 0x22bd +#define DSM_DEBUZZ_NOTCH_B1_BYTE1 0x22be +#define DSM_DEBUZZ_NOTCH_B1_BYTE2 0x22bf +#define DSM_DEBUZZ_NOTCH_B2_BYTE0 0x22c1 +#define DSM_DEBUZZ_NOTCH_B2_BYTE1 0x22c2 +#define DSM_DEBUZZ_NOTCH_B2_BYTE2 0x22c3 +#define DSM_DEBUZZ_NOTCH_A1_BYTE0 0x22c5 +#define DSM_DEBUZZ_NOTCH_A1_BYTE1 0x22c6 +#define DSM_DEBUZZ_NOTCH_A1_BYTE2 0x22c7 +#define DSM_DEBUZZ_NOTCH_A2_BYTE0 0x22c9 +#define DSM_DEBUZZ_NOTCH_A2_BYTE1 0x22ca +#define DSM_DEBUZZ_NOTCH_A2_BYTE2 0x22cb +#define DSM_THERMAL_BQ_B0_BYTE0 0x22cd +#define DSM_THERMAL_BQ_B0_BYTE1 0x22ce +#define DSM_THERMAL_BQ_B0_BYTE2 0x22cf +#define DSM_THERMAL_BQ_B1_BYTE0 0x22d1 +#define DSM_THERMAL_BQ_B1_BYTE1 0x22d2 +#define DSM_THERMAL_BQ_B1_BYTE2 0x22d3 +#define DSM_THERMAL_BQ_B2_BYTE0 0x22d5 +#define DSM_THERMAL_BQ_B2_BYTE1 0x22d6 +#define DSM_THERMAL_BQ_B2_BYTE2 0x22d7 +#define DSM_THERMAL_BQ_A1_BYTE0 0x22d9 +#define DSM_THERMAL_BQ_A1_BYTE1 0x22da +#define DSM_THERMAL_BQ_A1_BYTE2 0x22db +#define DSM_THERMAL_BQ_A2_BYTE0 0x22dd +#define DSM_THERMAL_BQ_A2_BYTE1 0x22de +#define DSM_THERMAL_BQ_A2_BYTE2 0x22df +#define DSM_WBDRC_FILT1_B0_BYTE0 0x22e1 +#define DSM_WBDRC_FILT1_B0_BYTE1 0x22e2 +#define DSM_WBDRC_FILT1_B0_BYTE2 0x22e3 +#define DSM_WBDRC_FILT1_B1_BYTE0 0x22e5 +#define DSM_WBDRC_FILT1_B1_BYTE1 0x22e6 +#define DSM_WBDRC_FILT1_B1_BYTE2 0x22e7 +#define DSM_WBDRC_FILT1_B2_BYTE0 0x22e9 +#define DSM_WBDRC_FILT1_B2_BYTE1 0x22ea +#define DSM_WBDRC_FILT1_B2_BYTE2 0x22eb +#define DSM_WBDRC_FILT1_A1_BYTE0 0x22ed +#define DSM_WBDRC_FILT1_A1_BYTE1 0x22ee +#define DSM_WBDRC_FILT1_A1_BYTE2 0x22ef +#define DSM_WBDRC_FILT1_A2_BYTE0 0x22f1 +#define DSM_WBDRC_FILT1_A2_BYTE1 0x22f2 +#define DSM_WBDRC_FILT1_A2_BYTE2 0x22f3 +#define DSM_WBDRC_FILT2_B0_BYTE0 0x22f5 +#define DSM_WBDRC_FILT2_B0_BYTE1 0x22f6 +#define DSM_WBDRC_FILT2_B0_BYTE2 0x22f7 +#define DSM_WBDRC_FILT2_B1_BYTE0 0x22f9 +#define DSM_WBDRC_FILT2_B1_BYTE1 0x22fa +#define DSM_WBDRC_FILT2_B1_BYTE2 0x22fb +#define DSM_WBDRC_FILT2_B2_BYTE0 0x22fd +#define DSM_WBDRC_FILT2_B2_BYTE1 0x22fe +#define DSM_WBDRC_FILT2_B2_BYTE2 0x22ff +#define DSM_WBDRC_FILT2_A1_BYTE0 0x2301 +#define DSM_WBDRC_FILT2_A1_BYTE1 0x2302 +#define DSM_WBDRC_FILT2_A1_BYTE2 0x2303 +#define DSM_WBDRC_FILT2_A2_BYTE0 0x2305 +#define DSM_WBDRC_FILT2_A2_BYTE1 0x2306 +#define DSM_WBDRC_FILT2_A2_BYTE2 0x2307 +#define DSM_PPR_RELEASE_TIME_BYTE0 0x2309 +#define DSM_PPR_RELEASE_TIME_BYTE1 0x230a +#define DSM_PPR_RELEASE_TIME_BYTE2 0x230b +#define DSM_PPR_ATTACK_TIME_BYTE0 0x230d +#define DSM_PPR_ATTACK_TIME_BYTE1 0x230e +#define DSM_PPR_ATTACK_TIME_BYTE2 0x230f +#define DSM_DEBUZZER_RELEASE_TIME_BYTE0 0x2311 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE1 0x2312 +#define DSM_DEBUZZER_RELEASE_TIME_BYTE2 0x2313 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE0 0x2315 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE1 0x2316 +#define DSM_DEBUZZER_ATTACK_TIME_BYTE2 0x2317 + +#define DSMIG_WB_DRC_RELEASE_TIME_1 0x2380 +#define DSMIG_WB_DRC_RELEASE_TIME_2 0x2381 +#define DSMIG_WB_DRC_ATTACK_TIME_1 0x2382 +#define DSMIG_WB_DRC_ATTACK_TIME_2 0x2383 +#define DSMIG_WB_DRC_COMPRESSION_RATIO 0x2384 +#define DSMIG_WB_DRC_COMPRESSION_THRESHOLD 0x2385 +#define DSMIG_WB_DRC_MAKEUPGAIN 0x2386 +#define DSMIG_WB_DRC_NOISE_GATE_THRESHOLD 0x2387 +#define DSMIG_WBDRC_HPF_ENABLE 0x2388 +#define DSMIG_WB_DRC_TEST_SMOOTHER_OUT_EN 0x2389 +#define DSMIG_PPR_THRESHOLD 0x238b +#define DSM_STEREO_BASS_CHANNEL_SELECT 0x238d +#define DSM_TPROT_THRESHOLD_BYTE0 0x238e +#define DSM_TPROT_THRESHOLD_BYTE1 0x238f +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE0 0x2390 +#define DSM_TPROT_ROOM_TEMPERATURE_BYTE1 0x2391 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE0 0x2392 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE1 0x2393 +#define DSM_TPROT_RECIP_RDC_ROOM_BYTE2 0x2394 +#define DSM_TPROT_RECIP_TCONST_BYTE0 0x2395 +#define DSM_TPROT_RECIP_TCONST_BYTE1 0x2396 +#define DSM_TPROT_RECIP_TCONST_BYTE2 0x2397 +#define DSM_THERMAL_ATTENUATION_SETTINGS 0x2398 +#define DSM_THERMAL_PILOT_TONE_ATTENUATION 0x2399 +#define DSM_TPROT_PG_TEMP_THRESH_BYTE0 0x239a +#define DSM_TPROT_PG_TEMP_THRESH_BYTE1 0x239b + +#define THERMAL_RDC_RD_BACK_BYTE1 0x239c +#define THERMAL_RDC_RD_BACK_BYTE0 0x239d +#define THERMAL_COILTEMP_RD_BACK_BYTE1 0x239e +#define THERMAL_COILTEMP_RD_BACK_BYTE0 0x239f + +#define DSMIG_DEBUZZER_THRESHOLD 0x23b5 +#define DSMIG_DEBUZZER_ALPHA_COEF_TEST_ONLY 0x23b6 +#define DSM_VOL_ENA 0x23b9 +#define DSM_VOL_CTRL 0x23ba + +#define DSMIG_EN 0x23e0 +#define MAX98390_R23E1_DSP_GLOBAL_EN 0x23e1 + +#define DSM_THERMAL_GAIN 0x23f0 +#define DSM_PPR_GAIN 0x23f1 +#define DSM_DBZ_GAIN 0x23f2 +#define DSM_WBDRC_GAIN 0x23f3 + +#define MAX98390_R23FF_GLOBAL_EN 0x23FF +#define MAX98390_R24FF_REV_ID 0x24FF + +/* MAX98390_R2021_PCM_RX_SRC_1 */ +#define MAX98390_PCM_RX_CH_SRC_SHIFT (0) +#define MAX98390_PCM_RX_CH_SRC_BASS_SHIFT (4) + +/* MAX98390_R2022_PCM_TX_SRC_1 */ +#define MAX98390_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98390_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98390_R2024_PCM_DATA_FMT_CFG */ +#define MAX98390_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98390_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98390_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98390_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98390_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98390_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98390_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98390_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98390_R2039_AMP_DSP_CFG */ +#define MAX98390_AMP_DSP_CFG_RMP_UP_SHIFT (4) +#define MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT (5) + +/* MAX98390_R203A_AMP_EN */ +#define MAX98390_R203A_AMP_EN_SHIFT (0) + +/* MAX98390_PCM_MASTER_MODE */ +#define MAX98390_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98390_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98390_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98390_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98390_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* PCM_CLK_SETUP */ +#define MAX98390_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98390_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* PCM_SR_SETUP */ +#define MAX98390_PCM_SR_SET1_SR_MASK (0xF << 0) +#define MAX98390_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98390_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98390_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98390_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98390_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98390_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98390_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98390_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98390_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* PCM_TO_SPK_MONO_MIX_1 */ +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98390_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) +#define MAX98390_PCM_TO_SPK_CH0_SRC_MASK (0xF << 0) +#define MAX98390_PCM_TO_SPK_CH1_SRC_MASK (0xF << 4) + +/* MAX98390_BOOST_CTRL3 */ +#define MAX98390_BOOST_CLK_PHASE_CFG_SHIFT (2) + +/* SOFT_RESET */ +#define MAX98390_SOFT_RESET_MASK (0x1 << 0) + +#define MAX98390_GLOBAL_EN_MASK (0x1 << 0) +#define MAX98390_AMP_EN_MASK (0x1 << 0) + +/* DSM register offset */ +#define MAX98390_DSM_PAYLOAD_OFFSET 16 +#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 + +struct max98390_priv { + struct regmap *regmap; + unsigned int sysclk; + unsigned int master; + unsigned int tdm_mode; + unsigned int ref_rdc_value; + unsigned int ambient_temp_value; +}; +#endif -- 2.17.1

1 0

[V2 PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 12 May '20

12 May '20

Add documentation for DT binding of max98390 amplifier driver. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..0ddd4c6ae55e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + +- maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12 + +- maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <100232>; +}; -- 2.17.1

1 0

[PATCH] ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
by Takashi Iwai 12 May '20

12 May '20

ASUS ZenBook UX431DA requires an additional COEF setup when booted from the recent Windows 10, otherwise it produces the noisy output. The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly due to the pop noise reduction. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f1cf2567d33d..4080b492ecc0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6090,6 +6090,7 @@ enum { ALC294_FIXUP_ASUS_DUAL_SPK, ALC285_FIXUP_THINKPAD_HEADSET_JACK, ALC294_FIXUP_ASUS_HPE, + ALC294_FIXUP_ASUS_COEF_1B, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED, @@ -7222,6 +7223,17 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC }, + [ALC294_FIXUP_ASUS_COEF_1B] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* Set bit 10 to correct noisy output after reboot from + * Windows 10 (due to pop noise reduction?) + */ + { 0x20, AC_VERB_SET_COEF_INDEX, 0x1b }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x4e4b }, + { } + }, + }, [ALC285_FIXUP_HP_GPIO_LED] = { .type = HDA_FIXUP_FUNC, .v.func = alc285_fixup_hp_gpio_led, @@ -7420,6 +7432,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1b11, "ASUS UX431DA", ALC294_FIXUP_ASUS_COEF_1B), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- 2.16.4

1 0

[PATCH 1/3] ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
by Jian-Hong Pan 12 May '20

12 May '20

From: Chris Chiu <chiu(a)endlessm.com> The ASUS laptop GL503VM with ALC295 can't detect the headset microphone. The headset microphone does not work until pin 0x19 is enabled for it. Signed-off-by: Chris Chiu <chiu(a)endlessm.com> Signed-off-by: Daniel Drake <drake(a)endlessm.com> Signed-off-by: Jian-Hong Pan <jian-hong(a)endlessm.com> --- sound/pci/hda/patch_realtek.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c16f63957c5a..6c996df16201 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6083,6 +6083,7 @@ enum { ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED, + ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, }; static const struct hda_fixup alc269_fixups[] = { @@ -7216,6 +7217,15 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc236_fixup_hp_mute_led, }, + [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7993,6 +8003,10 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x12, 0x90a60130}, {0x17, 0x90170110}, {0x21, 0x03211020}), + SND_HDA_PIN_QUIRK(0x10ec0295, 0x1043, "ASUS", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, + {0x12, 0x90a60130}, + {0x17, 0x90170110}, + {0x21, 0x03211020}), SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, {0x14, 0x90170110}, {0x21, 0x04211020}), -- 2.26.2

2 5

[PATCH] ASoC: rsnd: add interrupt support for SSI BUSIF buffer
by Yongbo Zhang 12 May '20

12 May '20

SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data. This patch adds overflow and underflow interrupt support for SSI BUSIF buffer. Cc: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Reported-by: Chen Li <licheng0822(a)thundersoft.com> Signed-off-by: Yongbo Zhang <giraffesnn123(a)gmail.com> Tested-by: Chen Li <licheng0822(a)thundersoft.com> --- sound/soc/sh/rcar/gen.c | 8 +++ sound/soc/sh/rcar/rsnd.h | 9 +++ sound/soc/sh/rcar/ssi.c | 142 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 insertions(+) diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index af19010b9d88..8bd49c8a9517 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -224,6 +224,14 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv) RSND_GEN_S_REG(SSI_SYS_STATUS5, 0x884), RSND_GEN_S_REG(SSI_SYS_STATUS6, 0x888), RSND_GEN_S_REG(SSI_SYS_STATUS7, 0x88c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE0, 0x850), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE1, 0x854), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE2, 0x858), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE3, 0x85c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE4, 0x890), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE5, 0x894), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE6, 0x898), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE7, 0x89c), RSND_GEN_S_REG(HDMI0_SEL, 0x9e0), RSND_GEN_S_REG(HDMI1_SEL, 0x9e4), diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index ea6cbaa9743e..d47608ff5fac 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -189,6 +189,14 @@ enum rsnd_reg { SSI_SYS_STATUS5, SSI_SYS_STATUS6, SSI_SYS_STATUS7, + SSI_SYS_INT_ENABLE0, + SSI_SYS_INT_ENABLE1, + SSI_SYS_INT_ENABLE2, + SSI_SYS_INT_ENABLE3, + SSI_SYS_INT_ENABLE4, + SSI_SYS_INT_ENABLE5, + SSI_SYS_INT_ENABLE6, + SSI_SYS_INT_ENABLE7, HDMI0_SEL, HDMI1_SEL, SSI9_BUSIF0_MODE, @@ -237,6 +245,7 @@ enum rsnd_reg { #define SSI9_BUSIF_ADINR(i) (SSI9_BUSIF0_ADINR + (i)) #define SSI9_BUSIF_DALIGN(i) (SSI9_BUSIF0_DALIGN + (i)) #define SSI_SYS_STATUS(i) (SSI_SYS_STATUS0 + (i)) +#define SSI_SYS_INT_ENABLE(i) (SSI_SYS_INT_ENABLE0 + (i)) struct rsnd_priv; diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 4a7d3413917f..178f50a91b3e 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -372,6 +372,9 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, u32 wsr = ssi->wsr; int width; int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; is_tdm = rsnd_runtime_is_tdm(io); is_tdm_split = rsnd_runtime_is_tdm_split(io); @@ -447,6 +450,38 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, cr_mode = DIEN; /* PIO : enable Data interrupt */ } + /* enable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable |= 0xf << (id * 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable |= 0xf << 4; + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + } + init_end: ssi->cr_own = cr_own; ssi->cr_mode = cr_mode; @@ -496,6 +531,13 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct device *dev = rsnd_priv_to_dev(priv); + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -517,6 +559,37 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, ssi->wsr = 0; } + /* disable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable &= ~(0xf << (id * 4)); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable &= ~(0xf << 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + return 0; } @@ -622,6 +695,11 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, int enable) { u32 val = 0; + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (rsnd_is_gen1(priv)) return 0; @@ -635,6 +713,19 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, if (enable) val = rsnd_ssi_is_dma_mode(mod) ? 0x0e000000 : 0x0f000000; + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 9: + val |= 0xff00; + break; + } + } + rsnd_mod_write(mod, SSI_INT_ENABLE, val); return 0; @@ -651,6 +742,10 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, u32 status; bool elapsed = false; bool stop = false; + int is_tdm, is_tdm_split; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); spin_lock(&priv->lock); @@ -672,6 +767,53 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, stop = true; } + status = 0; + + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + status = rsnd_mod_read(mod, + SSI_SYS_STATUS(i * 2)); + status &= 0xf << (id * 4); + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS(i * 2), + 0xf << (id * 4)); + stop = true; + break; + } + } + break; + case 9: + for (i = 0; i < 4; i++) { + status = rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1)); + status &= 0xf << 4; + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1), + 0xf << 4); + stop = true; + break; + } + } + break; + } + } + rsnd_ssi_status_clear(mod); rsnd_ssi_interrupt_out: spin_unlock(&priv->lock); -- 2.26.2

3 4

[PATCH 00/17] ASoC: cleanup DAI/Component activity
by Kuninori Morimoto 12 May '20

12 May '20

Hi Mark This patch-set cleanups DAI/Component activity operation. I believe these works correctly, but maybe need some tests or deep review. [17/17] patch can be apply after [03/17] patch. Kuninori Morimoto (17): 1 ASoC: soc-dai: add snd_soc_dai_activity() 2 ASoC: use snd_soc_dai/component_activity() 3 ASoC: soc-dai: add snd_soc_component_activity() 4 ASoC: atomel: use snd_soc_dai/component_activity() 5 ASoC: bcm: use snd_soc_dai/component_activity() 6 ASoC: cirrus: use snd_soc_dai/component_activity() 7 ASoC: codecs: use snd_soc_dai/component_activity() 8 ASoC: fsl: use snd_soc_dai/component_activity() 9 ASoC: intel: use snd_soc_dai/component_activity() 10 ASoC: jz4740: use snd_soc_dai/component_activity() 11 ASoC: mediatek: use snd_soc_dai/component_activity() 12 ASoC: meson: use snd_soc_dai/component_activity() 13 ASoC: pxa: use snd_soc_dai/component_activity() 14 ASoC: ti: use snd_soc_dai/component_activity() 15 ASoC: uniphier: use snd_soc_dai/component_activity() 16 ASoC: cleanup dai / component active code 17 ASoC: soc-dai: add snd_soc_dai_stream_activity() include/sound/soc-component.h | 7 +--- include/sound/soc-dai.h | 5 ++- sound/soc/atmel/atmel_ssc_dai.c | 4 +-- sound/soc/bcm/bcm2835-i2s.c | 6 ++-- sound/soc/bcm/cygnus-ssp.c | 4 +-- sound/soc/cirrus/ep93xx-i2s.c | 4 +-- sound/soc/codecs/adav80x.c | 4 +-- sound/soc/codecs/arizona.c | 2 +- sound/soc/codecs/cs4271.c | 4 +-- sound/soc/codecs/madera.c | 2 +- sound/soc/codecs/max98090.c | 6 ++-- sound/soc/codecs/tlv320aic23.c | 2 +- sound/soc/codecs/tlv320dac33.c | 2 +- sound/soc/codecs/uda1380.c | 2 +- sound/soc/codecs/wl1273.c | 2 +- sound/soc/codecs/wm8711.c | 2 +- sound/soc/codecs/wm8753.c | 4 +-- sound/soc/dwc/dwc-i2s.c | 2 +- sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_spdif.c | 4 +-- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 14 ++++---- sound/soc/jz4740/jz4740-i2s.c | 8 ++--- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 8 ++--- sound/soc/meson/axg-tdm-interface.c | 2 +- sound/soc/pxa/pxa-ssp.c | 8 ++--- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/soc-compress.c | 4 +-- sound/soc/soc-core.c | 11 ++++--- sound/soc/soc-dai.c | 12 +++++++ sound/soc/soc-dapm.c | 8 ++--- sound/soc/soc-pcm.c | 34 ++++++++++---------- sound/soc/ti/davinci-mcasp.c | 2 +- sound/soc/ti/omap-dmic.c | 4 +-- sound/soc/ti/omap-mcbsp.c | 4 +-- sound/soc/ti/omap-mcpdm.c | 8 ++--- sound/soc/uniphier/aio-cpu.c | 4 +-- 36 files changed, 105 insertions(+), 98 deletions(-) -- 2.17.1

3 25

alsa-gobject: seq: user_client: remove useless argument of delete_port()
by GitHub pull_request - opened 12 May '20

12 May '20

alsa-project/alsa-gobject pull request #21 was opened from takaswie: In implementation of ALSA sequencer core, the port owned by client can be deleted by userspace applications which opens the client, therefore it's necessary and sufficient to have an argument just for the numerical ID of port. This commit removes the useless argument for port information. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> Request URL : https://github.com/alsa-project/alsa-gobject/pull/21 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/21.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

[alsa-devel] [PATCH] sound/soc: only first codec is master in multicodec setup
by Johannes Krude 11 May '20

11 May '20

When using multiple codecs, at most one codec should generate the master clock. All codecs except the first are therefore configured for slave mode. Before this patch all codecs in a multicodec setup had to be slaves. This is needed when e.g., connecting multiple sound hats for simultaneous playback to the raspberry pi I2S output and one of the sound hats generates the I2S clocks (https://github.com/raspberrypi/linux/pull/3337). I checked the raspberry pi kernel tree for multicodec usage with `fgrep num_codecs -R sound/soc/` and verified that all existing multicodec drivers with hardcoded format have indeed configured all codecs for slave mode. Doing a similar check on the current for-5.5 tree is more difficult since .num_codecs is now hidden behind a preprocessor macro. Signed-off-by: Johannes Krude <johannes(a)krude.de> --- sound/soc/soc-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 058e038df..cb8952527 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1688,6 +1688,14 @@ int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd, for_each_rtd_codec_dai(rtd, i, codec_dai) { + unsigned int codec_dai_fmt = dai_fmt; + - ret = snd_soc_dai_set_fmt(codec_dai, dai_fmt); + // there can only be one master when using multiple codecs + if (i && (codec_dai_fmt & SND_SOC_DAIFMT_MASTER_MASK)) { + codec_dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK; + codec_dai_fmt |= SND_SOC_DAIFMT_CBS_CFS; + } + + ret = snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt); if (ret != 0 && ret != -ENOTSUPP) { dev_warn(codec_dai->dev, "ASoC: Failed to set DAI format: %d\n", ret); -- 2.17.1

2 2

[PATCH alsa-lib 0/3] Trivial compile warning fixes
by Takashi Iwai 11 May '20

11 May '20

Hi, here is a few patches to shut up trivial compile warnings that have been introduced recently. Takashi === Takashi Iwai (3): pcm: rate: Fix compile warning wrt bit ops and comparison pcm: rate: Fix uninitialized variable warning topology: Add missing ATTRIBUTE_UNUSED src/pcm/pcm_rate.c | 4 ++-- src/topology/pcm.c | 18 ++++++++++-------- 2 files changed, 12 insertions(+), 10 deletions(-) -- 2.16.4

2 4

[PATCH] ASoC: mediatek: mt8183-da7219: set headset button maps
by Tzung-Bi Shih 11 May '20

11 May '20

Sets headset button maps. Signed-off-by: Tzung-Bi Shih <tzungbi(a)google.com> --- .../soc/mediatek/mt8183/mt8183-da7219-max98357.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c index 5b3dfa79b4ae..ffd7c931e7bb 100644 --- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c @@ -6,11 +6,12 @@ // Copyright (c) 2018 MediaTek Inc. // Author: Shunli Wang <shunli.wang(a)mediatek.com> +#include <linux/input.h> #include <linux/module.h> +#include <linux/pinctrl/consumer.h> +#include <sound/jack.h> #include <sound/pcm_params.h> #include <sound/soc.h> -#include <sound/jack.h> -#include <linux/pinctrl/consumer.h> #include "mt8183-afe-common.h" #include "../../codecs/da7219-aad.h" @@ -471,9 +472,18 @@ mt8183_da7219_max98357_headset_init(struct snd_soc_component *component) if (ret) return ret; + snd_jack_set_key( + priv->headset_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); + snd_jack_set_key( + priv->headset_jack.jack, SND_JACK_BTN_1, KEY_VOLUMEUP); + snd_jack_set_key( + priv->headset_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN); + snd_jack_set_key( + priv->headset_jack.jack, SND_JACK_BTN_3, KEY_VOICECOMMAND); + da7219_aad_jack_det(component, &priv->headset_jack); - return ret; + return 0; } static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) -- 2.26.2.645.ge9eca65c58-goog

2 1

[PATCH -next] ASoC: SOF: core: fix error return code in sof_probe_continue()
by Wei Yongjun 11 May '20

11 May '20

Fix to return negative error code -ENOMEM from the IPC init error handling case instead of 0, as done elsewhere in this function. Fixes: c16211d6226d ("ASoC: SOF: Add Sound Open Firmware driver core") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> --- sound/soc/sof/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 94a2cb58ab9a..ef9be4f45e27 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -176,6 +176,7 @@ static int sof_probe_continue(struct snd_sof_dev *sdev) /* init the IPC */ sdev->ipc = snd_sof_ipc_init(sdev); if (!sdev->ipc) { + ret = -ENOMEM; dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret); goto ipc_err; }

2 1

[PATCH v1] ASoC: rsnd: add interrupt support for SSI BUSIF buffer
by Yongbo Zhang 11 May '20

11 May '20

SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data. This patch adds overflow and underflow interrupt support for SSI BUSIF buffer. Reported-by: Chen Li <licheng0822(a)thundersoft.com> Signed-off-by: Yongbo Zhang <giraffesnn123(a)gmail.com> Tested-by: Chen Li <licheng0822(a)thundersoft.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/sh/rcar/gen.c | 8 +++ sound/soc/sh/rcar/rsnd.h | 9 +++ sound/soc/sh/rcar/ssi.c | 142 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 insertions(+) diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index af19010b9d88..8bd49c8a9517 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -224,6 +224,14 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv) RSND_GEN_S_REG(SSI_SYS_STATUS5, 0x884), RSND_GEN_S_REG(SSI_SYS_STATUS6, 0x888), RSND_GEN_S_REG(SSI_SYS_STATUS7, 0x88c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE0, 0x850), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE1, 0x854), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE2, 0x858), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE3, 0x85c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE4, 0x890), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE5, 0x894), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE6, 0x898), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE7, 0x89c), RSND_GEN_S_REG(HDMI0_SEL, 0x9e0), RSND_GEN_S_REG(HDMI1_SEL, 0x9e4), diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index ea6cbaa9743e..d47608ff5fac 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -189,6 +189,14 @@ enum rsnd_reg { SSI_SYS_STATUS5, SSI_SYS_STATUS6, SSI_SYS_STATUS7, + SSI_SYS_INT_ENABLE0, + SSI_SYS_INT_ENABLE1, + SSI_SYS_INT_ENABLE2, + SSI_SYS_INT_ENABLE3, + SSI_SYS_INT_ENABLE4, + SSI_SYS_INT_ENABLE5, + SSI_SYS_INT_ENABLE6, + SSI_SYS_INT_ENABLE7, HDMI0_SEL, HDMI1_SEL, SSI9_BUSIF0_MODE, @@ -237,6 +245,7 @@ enum rsnd_reg { #define SSI9_BUSIF_ADINR(i) (SSI9_BUSIF0_ADINR + (i)) #define SSI9_BUSIF_DALIGN(i) (SSI9_BUSIF0_DALIGN + (i)) #define SSI_SYS_STATUS(i) (SSI_SYS_STATUS0 + (i)) +#define SSI_SYS_INT_ENABLE(i) (SSI_SYS_INT_ENABLE0 + (i)) struct rsnd_priv; diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 4a7d3413917f..87a2182a4514 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -372,6 +372,9 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, u32 wsr = ssi->wsr; int width; int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; is_tdm = rsnd_runtime_is_tdm(io); is_tdm_split = rsnd_runtime_is_tdm_split(io); @@ -447,6 +450,38 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, cr_mode = DIEN; /* PIO : enable Data interrupt */ } + /* enable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable |= 0xf << (id * 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable |= 0xf << 4; + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + } + init_end: ssi->cr_own = cr_own; ssi->cr_mode = cr_mode; @@ -496,6 +531,13 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct device *dev = rsnd_priv_to_dev(priv); + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -517,6 +559,37 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, ssi->wsr = 0; } + /* disable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable &= ~(0xf << (id * 4)); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable &= ~(0xf << 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + return 0; } @@ -622,6 +695,11 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, int enable) { u32 val = 0; + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); if (rsnd_is_gen1(priv)) return 0; @@ -635,6 +713,19 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, if (enable) val = rsnd_ssi_is_dma_mode(mod) ? 0x0e000000 : 0x0f000000; + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 9: + val |= 0x0000ff00; + break; + } + } + rsnd_mod_write(mod, SSI_INT_ENABLE, val); return 0; @@ -651,6 +742,10 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, u32 status; bool elapsed = false; bool stop = false; + int is_tdm, is_tdm_split; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io); spin_lock(&priv->lock); @@ -672,6 +767,53 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, stop = true; } + status = 0; + + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + status = rsnd_mod_read(mod, + SSI_SYS_STATUS(i * 2)); + status &= 0xf << (id * 4); + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS(i * 2), + 0xf << (id * 4)); + stop = true; + break; + } + } + break; + case 9: + for (i = 0; i < 4; i++) { + status = rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1)); + status &= 0xf << 4; + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1), + 0xf << 4); + stop = true; + break; + } + } + break; + } + } + rsnd_ssi_status_clear(mod); rsnd_ssi_interrupt_out: spin_unlock(&priv->lock); -- 2.26.2

1 0

seq: user_client: use constant qualifier for read-only parameter
by GitHub pull_request - opened 11 May '20

11 May '20

alsa-project/alsa-gobject pull request #20 was opened from takaswie: The 'port_id' parameters of 'alsaseq_user_client_create_port()' is a pointer to storage of unsigned char type, due to optional parameter in g-i interface. It's read-only if having value and it's better to have const qualifier. Request URL : https://github.com/alsa-project/alsa-gobject/pull/20 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/20.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

Fix pour Asus Xonar U5 card SPIF in USB-Audio.conf
by GitHub issues - edited 11 May '20

11 May '20

alsa-project/alsa-lib issue #48 was edited from burningd0g: It would be greatly apreciated to add the iec958 correct device in the default USB-Audio.conf for the Xonar USB sound card : USB-Audio.pcm.iec958_device { ... "ASUS XONAR U5" 1 "XONAR U5" 1 ... } It would prevent me (and maybe some other people) to freak out on why it doesn't work out of the box! :) I know the issue is also present on the U7 but i don't have all the possible device name for it. Thanks! Issue URL : https://github.com/alsa-project/alsa-lib/issues/48 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Fix pour Asus Xonar U5 card SPIF in USB-Audio.conf
by GitHub issues - opened 11 May '20

11 May '20

alsa-project/alsa-lib issue #48 was opened from burningd0g: Issue URL : https://github.com/alsa-project/alsa-lib/issues/48 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH] ALSA: firewire-motu: fulfill missing entries in Kconfig
by Takashi Sakamoto 11 May '20

11 May '20

This is trivial commit but fulfill missing entries in Kconfig for devices supported by ALSA firewire-motu driver. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/Kconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig index f7ed69d60310..25778765cbfe 100644 --- a/sound/firewire/Kconfig +++ b/sound/firewire/Kconfig @@ -150,8 +150,12 @@ config SND_FIREWIRE_MOTU Say Y here to enable support for FireWire devices which MOTU produced: * 828mk2 * Traveler - * 828mk3 + * Ultralite + * 8pre + * 828mk3 (FireWire only) + * 828mk3 (Hybrid) * Audio Express + * 4pre To compile this driver as a module, choose M here: the module will be called snd-firewire-motu. -- 2.25.1

2 1

[PATCH v2 0/2] soundwire: remove multiple superfluous "else" statements
by Guennadi Liakhovetski 11 May '20

11 May '20

Two patches cleaning up the same issue for soundwire core and Intel- specific code. v2: split into 2 for core and Intel code Guennadi Liakhovetski (2): soundwire: (cosmetic) remove multiple superfluous "else" statements soundwire: intel: (cosmetic) remove multiple superfluous "else" statements drivers/soundwire/bus.c | 17 ++++++++++------- drivers/soundwire/cadence_master.c | 8 ++++++-- drivers/soundwire/intel_init.c | 4 +++- 3 files changed, 19 insertions(+), 10 deletions(-) -- 1.9.3

2 3

[PATCH -next] soundwire: qcom: Use IRQF_ONESHOT
by Samuel Zou 11 May '20

11 May '20

Fixes coccicheck error: drivers/soundwire/qcom.c:815:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Samuel Zou <zou_wei(a)huawei.com> --- drivers/soundwire/qcom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index e08a17c..a2a35f7 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -814,7 +814,8 @@ static int qcom_swrm_probe(struct platform_device *pdev) ret = devm_request_threaded_irq(dev, ctrl->irq, NULL, qcom_swrm_irq_handler, - IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING | + IRQF_ONESHOT, "soundwire", ctrl); if (ret) { dev_err(dev, "Failed to request soundwire irq\n"); -- 2.6.2

2 1

[PATCH] ASoC: core: Make sure component driver names are unique
by Ranjani Sridharan 11 May '20

11 May '20

When registering a component, make sure that the driver names are unique. This will ensure that the snd_soc_rtdcom_lookup() function returns the right component based on the name. Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- sound/soc/soc-core.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8321e75ff244..00c1f8ce46af 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -286,14 +286,6 @@ struct snd_soc_component *snd_soc_rtdcom_lookup(struct snd_soc_pcm_runtime *rtd, if (!driver_name) return NULL; - /* - * NOTE - * - * snd_soc_rtdcom_lookup() will find component from rtd by using - * specified driver name. - * But, if many components which have same driver name are connected - * to 1 rtd, this function will return 1st found component. - */ for_each_rtd_components(rtd, i, component) { const char *component_name = component->driver->name; @@ -2640,6 +2632,22 @@ int snd_soc_add_component(struct device *dev, } EXPORT_SYMBOL_GPL(snd_soc_add_component); +static bool +snd_soc_component_driver_name_is_unique(const struct snd_soc_component_driver *component_driver) +{ + struct snd_soc_component *component; + + mutex_lock(&client_mutex); + for_each_component(component) + if (!strcmp(component->driver->name, component_driver->name)) { + mutex_unlock(&client_mutex); + return false; + } + + mutex_unlock(&client_mutex); + return true; +} + int snd_soc_register_component(struct device *dev, const struct snd_soc_component_driver *component_driver, struct snd_soc_dai_driver *dai_drv, @@ -2647,6 +2655,13 @@ int snd_soc_register_component(struct device *dev, { struct snd_soc_component *component; + if (component_driver->name && + !snd_soc_component_driver_name_is_unique(component_driver)) { + dev_err(dev, "component driver name %s is not unique\n", + component_driver->name); + return -EINVAL; + } + component = devm_kzalloc(dev, sizeof(*component), GFP_KERNEL); if (!component) return -ENOMEM; -- 2.17.1

3 6

[RFC] Add duplex sound support for USB devices using implicit feedback
by Erwin Burema 10 May '20

10 May '20

Hi, Since I had problems getting duplex audio to work on my motu m2 I created the following patch to get duplex audio to work. This is based on my understanding that when implicit feedback is used the size of the next output is determined by the previous input, for this the content of the input is ignored but in case of duplex audio the content can actually contain audio information, so long as both input and output are configured the same both sould be usable. With the above in mind an endpoint can be opened/configured a second time so long as it is an implicit sync endpoint and the config does not change. So that is what this patch does, the check if the config does not change might be a bit more complex then needed, but it seems to work on my motu m2. Fixes bug 207023 and should fix 103751 as well Kind Regards, Erwin Burema --- sound/usb/card.h | 1 + sound/usb/endpoint.c | 195 ++++++++++++++++++++++++++++++++++++++++++- sound/usb/pcm.c | 5 ++ 3 files changed, 197 insertions(+), 4 deletions(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index 820e564656ed..d6219fba9699 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -108,6 +108,7 @@ struct snd_usb_endpoint { int iface, altsetting; int skip_packets; /* quirks for devices to ignore the first n packets in a stream */ + bool is_implicit_feedback; /* This endpoint is used as implicit feedback */ spinlock_t lock; struct list_head list; diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 50104f658ed4..9bea7d3f99f8 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -522,6 +522,8 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, list_add_tail(&ep->list, &chip->ep_list); + ep->is_implicit_feedback = 0; + __exit_unlock: mutex_unlock(&chip->mutex); @@ -621,6 +623,178 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force) ep->nurbs = 0; } +/* + * Check data endpoint for format differences + */ +static bool check_ep_params(struct snd_usb_endpoint *ep, + snd_pcm_format_t pcm_format, + unsigned int channels, + unsigned int period_bytes, + unsigned int frames_per_period, + unsigned int periods_per_buffer, + struct audioformat *fmt, + struct snd_usb_endpoint *sync_ep) +{ + unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb; + unsigned int max_packs_per_period, urbs_per_period, urb_packs; + unsigned int max_urbs; + int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels; + int tx_length_quirk = (ep->chip->tx_length_quirk && + usb_pipeout(ep->pipe)); + bool ret = 1; + + if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) { + /* + * When operating in DSD DOP mode, the size of a sample frame + * in hardware differs from the actual physical format width + * because we need to make room for the DOP markers. + */ + frame_bits += channels << 3; + } + + ret = ret && (ep->datainterval == fmt->datainterval); + ret = ret && (ep->stride == frame_bits >> 3); + + switch (pcm_format) { + case SNDRV_PCM_FORMAT_U8: + ret = ret && (ep->silence_value == 0x80); + break; + case SNDRV_PCM_FORMAT_DSD_U8: + case SNDRV_PCM_FORMAT_DSD_U16_LE: + case SNDRV_PCM_FORMAT_DSD_U32_LE: + case SNDRV_PCM_FORMAT_DSD_U16_BE: + case SNDRV_PCM_FORMAT_DSD_U32_BE: + ret = ret && (ep->silence_value == 0x69); + break; + default: + ret = ret && (ep->silence_value == 0); + } + + /* assume max. frequency is 50% higher than nominal */ + ret = ret && (ep->freqmax == ep->freqn + (ep->freqn >> 1)); + /* Round up freqmax to nearest integer in order to calculate maximum + * packet size, which must represent a whole number of frames. + * This is accomplished by adding 0x0.ffff before converting the + * Q16.16 format into integer. + * In order to accurately calculate the maximum packet size when + * the data interval is more than 1 (i.e. ep->datainterval > 0), + * multiply by the data interval prior to rounding. For instance, + * a freqmax of 41 kHz will result in a max packet size of 6 (5.125) + * frames with a data interval of 1, but 11 (10.25) frames with a + * data interval of 2. + * (ep->freqmax << ep->datainterval overflows at 8.192 MHz for the + * maximum datainterval value of 3, at USB full speed, higher for + * USB high speed, noting that ep->freqmax is in units of + * frames per packet in Q16.16 format.) + */ + maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) * + (frame_bits >> 3); + if (tx_length_quirk) + maxsize += sizeof(__le32); /* Space for length descriptor */ + /* but wMaxPacketSize might reduce this */ + if (ep->maxpacksize && ep->maxpacksize < maxsize) { + /* whatever fits into a max. size packet */ + unsigned int data_maxsize = maxsize = ep->maxpacksize; + + if (tx_length_quirk) + /* Need to remove the length descriptor to calc freq */ + data_maxsize -= sizeof(__le32); + ret = ret && (ep->freqmax == (data_maxsize / (frame_bits >> 3)) + << (16 - ep->datainterval)); + } + + if (ep->fill_max) + ret = ret && (ep->curpacksize == ep->maxpacksize); + else + ret = ret && (ep->curpacksize == maxsize); + + if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) { + packs_per_ms = 8 >> ep->datainterval; + max_packs_per_urb = MAX_PACKS_HS; + } else { + packs_per_ms = 1; + max_packs_per_urb = MAX_PACKS; + } + if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep)) + max_packs_per_urb = min(max_packs_per_urb, + 1U << sync_ep->syncinterval); + max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval); + + /* + * Capture endpoints need to use small URBs because there's no way + * to tell in advance where the next period will end, and we don't + * want the next URB to complete much after the period ends. + * + * Playback endpoints with implicit sync much use the same parameters + * as their corresponding capture endpoint. + */ + if (usb_pipein(ep->pipe) || + snd_usb_endpoint_implicit_feedback_sink(ep)) { + + urb_packs = packs_per_ms; + /* + * Wireless devices can poll at a max rate of once per 4ms. + * For dataintervals less than 5, increase the packet count to + * allow the host controller to use bursting to fill in the + * gaps. + */ + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) { + int interval = ep->datainterval; + + while (interval < 5) { + urb_packs <<= 1; + ++interval; + } + } + /* make capture URBs <= 1 ms and smaller than a period */ + urb_packs = min(max_packs_per_urb, urb_packs); + while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) + urb_packs >>= 1; + ret = ret && (ep->nurbs == MAX_URBS); + + /* + * Playback endpoints without implicit sync are adjusted so that + * a period fits as evenly as possible in the smallest number of + * URBs. The total number of URBs is adjusted to the size of the + * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits. + */ + } else { + /* determine how small a packet can be */ + minsize = (ep->freqn >> (16 - ep->datainterval)) * + (frame_bits >> 3); + /* with sync from device, assume it can be 12% lower */ + if (sync_ep) + minsize -= minsize >> 3; + minsize = max(minsize, 1u); + + /* how many packets will contain an entire ALSA period? */ + max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize); + + /* how many URBs will contain a period? */ + urbs_per_period = DIV_ROUND_UP(max_packs_per_period, + max_packs_per_urb); + /* how many packets are needed in each URB? */ + urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period); + + /* limit the number of frames in a single URB */ + ret = ret && (ep->max_urb_frames == + DIV_ROUND_UP(frames_per_period, urbs_per_period)); + + /* try to use enough URBs to contain an entire ALSA buffer */ + max_urbs = min((unsigned) MAX_URBS, + MAX_QUEUE * packs_per_ms / urb_packs); + ret = ret && (ep->nurbs == min(max_urbs, + urbs_per_period * periods_per_buffer)); + } + + ret = ret && (ep->datainterval == fmt->datainterval); + ret = ret && (ep->maxpacksize == fmt->maxpacksize); + ret = ret && + (ep->fill_max == !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX)); + + return ret; +} + /* * configure a data endpoint */ @@ -886,10 +1060,23 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, int err; if (ep->use_count != 0) { - usb_audio_warn(ep->chip, - "Unable to change format on ep #%x: already in use\n", - ep->ep_num); - return -EBUSY; + bool check = ep->is_implicit_feedback && + check_ep_params(ep, pcm_format, + channels, period_bytes, + period_frames, buffer_periods, + fmt, sync_ep); + + if (!check) { + usb_audio_warn(ep->chip, + "Unable to change format on ep #%x: already in use\n", + ep->ep_num); + return -EBUSY; + } + + usb_audio_dbg(ep->chip, + "Ep #%x already in use as implicit feedback but format not changed\n", + ep->ep_num); + return 0; } /* release old buffers, if any */ diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index b50965ab3b3a..d61c2f1095b5 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -404,6 +404,8 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, if (!subs->sync_endpoint) return -EINVAL; + subs->sync_endpoint->is_implicit_feedback = 1; + subs->data_endpoint->sync_master = subs->sync_endpoint; return 1; @@ -502,12 +504,15 @@ static int set_sync_endpoint(struct snd_usb_substream *subs, implicit_fb ? SND_USB_ENDPOINT_TYPE_DATA : SND_USB_ENDPOINT_TYPE_SYNC); + if (!subs->sync_endpoint) { if (is_playback && attr == USB_ENDPOINT_SYNC_NONE) return 0; return -EINVAL; } + subs->sync_endpoint->is_implicit_feedback = implicit_fb; + subs->data_endpoint->sync_master = subs->sync_endpoint; return 0; -- 2.26.2

2 2

[PATCH 0/6] ALSA: fireface: add support for Fireface 802 and UFX
by Takashi Sakamoto 10 May '20

10 May '20

Hi, Fireface 802 was shipped by RME GmbH in 2014. This model is one of latter models of Fireface series and support both of IEEE 1394 bus and USB. Furthermore, it supports two types of remote control unit (Basic Remote and Advanced Remote Control) with by 9pin mini-din connector. This patchset adds support for this model as a part of devices available by ALSA firewire stack (therefore it's not a device of USB). Userspace applications can transfer PCM frames and MIDI messages via ALSA PCM and Rawmidi interfaces. Fireface UFX is also supported since its internal design is almost the same as Fireface 802 in a point of packet communication. The support is untested and the status is 'request for test'. As well as the other models of RME Fireface series, audio output includes periodical hissing noise. This is not solved yet. Furthermore, capture of MIDI messages requires assist of userspace application. For the detail, please read comment in 'sound/firewire/fireface/ff-protocol-latter.c'. Regards Takashi Sakamoto (6): ALSA: fireface: fix configuration error for nominal sampling transfer frequency ALSA: fireface: start IR context immediately ALSA: fireface: code refactoring to add enumeration constants for model identification ALSA: fireface: code refactoring for name of sound card ALSA: fireface: add support for RME FireFace 802 ALSA: fireface: add support for Fireface UFX (untested) sound/firewire/Kconfig | 2 + sound/firewire/fireface/ff-protocol-latter.c | 58 +++++++++++++------ sound/firewire/fireface/ff-stream.c | 10 +--- sound/firewire/fireface/ff.c | 61 +++++++++++++++++--- sound/firewire/fireface/ff.h | 11 +++- 5 files changed, 103 insertions(+), 39 deletions(-) -- 2.25.1

2 9

snd_dice: Clicking artifacts with TC StudioKonnekt 48
by Mathias Buhr 10 May '20

10 May '20

Hi, thanks to this group, both of my firewire interfaces are (almost) working! Big thank you! While the TC Konnekt 24D works fine (playback and recording), the StudioKonnekt 48 produces clicking artifacts during playback when using snd_dice. This interface is working flawless on Windows and on a Jack/FFADO combination. This artifact occurs in all use cases (alsa via aplay, pulseaudio and jack) and does not seem to be in recorded streams. After recording the playback with another device, it looks like the level of the artifact is scaling with the signal and its interval is interestingly 256ms. Is there anything I can do to further debug this issue? Capture firewire packets? I would love to get this device fully working. I'm using kernel version 5.5.4 but this issue has been there for a long time. Thanks, Mathias

3 9

[PATCH] ALSA: hda/realtek: Add quirk for Samsung Notebook
by Mike Pozulp 10 May '20

10 May '20

Some models of the Samsung Notebook 9 have very quiet and distorted headphone output. This quirk changes the VREF value of the ALC298 codec NID 0x1a from default HIZ to new 100. Signed-off-by: Mike Pozulp <pozulp.kernel(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 63e1a56f705b..9b14ed5c75d7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5923,6 +5923,7 @@ enum { ALC294_FIXUP_ASUS_DUAL_SPK, ALC285_FIXUP_THINKPAD_HEADSET_JACK, ALC294_FIXUP_ASUS_HPE, + ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, }; static const struct hda_fixup alc269_fixups[] = { @@ -7061,6 +7062,13 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC }, + [ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc5 }, + { } + }, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7336,6 +7344,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */ SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE), + SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), #if 0 /* Below is a quirk table taken from the old code. -- 2.24.1

2 1

crackling microphone
by GitHub issues - reopened 09 May '20

09 May '20

alsa-project/alsa-plugins issue #10 was reopened from riddicc: Hi! When I send a 800Hz sine wave with rate 12345 to pcm.outmic and when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)), then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate). 1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345 2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav twinkle makes even bigger gaps, when I let it use pcm.micend as microphone... But with hw:Generic,0,0 as mic device twinkle works fine... https://github.com/LubosD/twinkle/issues/207 "samplerate_best" and "samplerate_order" seems to make it worse... How can I fix that? Thx. Bye. ![audacity screenshot](https://user-images.githubusercontent.com/33246439/81384628-7ad… Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

[alsa-devel] [alsa-lib][RFC PATCH] ucm: reset config id of condition items
by libin.yang＠linux.intel.com 09 May '20

09 May '20

From: Libin Yang <libin.yang(a)intel.com> UCMv2 supports "If" statement and will merge the same items with compound_merge(). If the items have the same id, it will fail to add the config items. And the id of the item in an array is automatically generated with the increased number. It is probably that some items to be merged have the same id. Let's add prefix in the id to avoid such situation. For example: If.seq1 { Condition { Type ControlExists Control "name='PGA1.0 1 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA1.0 1 Master Playback Volume' 50" ] } } If.seq2 { Condition { Type ControlExists Control "name='PGA2.0 2 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA2.0 2 Master Playback Volume' 50" ] } } If.seq3 { Condition { Type ControlExists Control "name='PGA3.0 3 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA3.0 3 Master Playback Volume' 50" ] } } If seq1, seq2 and seq3 conditions are true, UCM will fail to initialize. This patch rename the config id to avoid the same id conflict. Signed-off-by: Libin Yang <libin.yang(a)intel.com> --- include/conf.h | 2 +- src/conf.c | 21 +++++++++++++++++++++ src/ucm/ucm_cond.c | 28 ++++++++++++++++++++++++---- 3 files changed, 46 insertions(+), 5 deletions(-) diff --git a/include/conf.h b/include/conf.h index 456b272..adb3d84 100644 --- a/include/conf.h +++ b/include/conf.h @@ -139,7 +139,7 @@ int snd_config_imake_safe_string(snd_config_t **config, const char *key, const c int snd_config_imake_pointer(snd_config_t **config, const char *key, const void *ptr); snd_config_type_t snd_config_get_type(const snd_config_t *config); - +int snd_config_of_array(const snd_config_t *config); int snd_config_set_id(snd_config_t *config, const char *id); int snd_config_set_integer(snd_config_t *config, long value); int snd_config_set_integer64(snd_config_t *config, long long value); diff --git a/src/conf.c b/src/conf.c index 50d0403..43d565b 100644 --- a/src/conf.c +++ b/src/conf.c @@ -435,6 +435,8 @@ struct _snd_config { char *id; snd_config_type_t type; int refcount; /* default = 0 */ + /* member of an array */ + int of_array; union { long integer; long long integer64; @@ -1123,6 +1125,7 @@ static int _snd_config_make(snd_config_t **config, char **id, snd_config_type_t *id = NULL; } n->type = type; + n->of_array = 0; if (type == SND_CONFIG_TYPE_COMPOUND) INIT_LIST_HEAD(&n->u.compound.fields); *config = n; @@ -1316,6 +1319,8 @@ static int parse_array_def(snd_config_t *parent, input_t *input, int *idx, int s default: unget_char(c, input); err = parse_value(&n, parent, input, &id, skip); + /* this is a member of an array */ + n->of_array = 1; if (err < 0) goto __end; break; @@ -1784,6 +1789,22 @@ snd_config_type_t snd_config_get_type(const snd_config_t *config) } /** + * \brief Returns the of_array of a configuration node. + * \param config Handle to the configuration node. + * \return of_array of the node + * + * The returned value indicates whether the node is a member of an array. + * + * \par Conforming to: + * LSB 3.2 + */ +int snd_config_of_array(const snd_config_t *config) +{ + assert(config); + return config->of_array; +} + +/** * \brief Returns the id of a configuration node. * \param[in] config Handle to the configuration node. * \param[out] id The function puts the pointer to the id string at the diff --git a/src/ucm/ucm_cond.c b/src/ucm/ucm_cond.c index 22b418d..725a69e 100644 --- a/src/ucm/ucm_cond.c +++ b/src/ucm/ucm_cond.c @@ -347,14 +347,15 @@ static void config_dump(snd_config_t *cfg) } #endif -static int compound_merge(const char *id, +static int compound_merge(const char *id, const char *cname, snd_config_t *dst, snd_config_t *src, snd_config_t *before, snd_config_t *after) { snd_config_iterator_t i, next; snd_config_t *n, *_before = NULL, *_after = NULL; const char *s; - int err; + char s1[32]; + int err, cnt; if (snd_config_get_type(src) != SND_CONFIG_TYPE_COMPOUND) { uc_error("compound type expected for If True/False block"); @@ -387,8 +388,22 @@ static int compound_merge(const char *id, return -EINVAL; } + cnt = 0; snd_config_for_each(i, next, src) { n = snd_config_iterator_entry(i); + /* + * If n is an array member, n->id is automatically generated. + * It is prossible that n->id is used by other array member, + * which will be merged with this one. So let's add prefix + * to the id to avoid the conflict. + */ + if (snd_config_of_array(n)) { + err = snd_config_get_id(n, &s); + if (err < 0) + return err; /* FIXME: this will never happen */ + snprintf(s1, sizeof(s1), "%s-%d-%s", cname, cnt++, s); + snd_config_set_id(n, (const char *)s1); + } err = snd_config_remove(n); if (err < 0) return err; @@ -422,7 +437,7 @@ int uc_mgr_evaluate_condition(snd_use_case_mgr_t *uc_mgr, { snd_config_iterator_t i, i2, next, next2; snd_config_t *a, *n, *n2, *parent2, *before, *after; - const char *id; + const char *id, *cname; int err; if (uc_mgr->conf_format < 2) { @@ -437,6 +452,10 @@ int uc_mgr_evaluate_condition(snd_use_case_mgr_t *uc_mgr, snd_config_for_each(i, next, cond) { n = snd_config_iterator_entry(i); + err = snd_config_get_id(n, &cname); + if (err < 0) + return err; /* FIXME: this will never happen */ + before = after = NULL; err = if_eval_one(uc_mgr, n, &a, &before, &after); if (err < 0) @@ -469,7 +488,8 @@ __add: err = snd_config_search(parent, id, &parent2); if (err == -ENOENT) goto __add; - err = compound_merge(id, parent2, n2, before, after); + err = compound_merge(id, cname, parent2, n2, + before, after); if (err < 0) return err; } -- 2.7.4

4 8

crackling microphone
by GitHub issues - reopened 09 May '20

09 May '20

alsa-project/alsa-plugins issue #10 was reopened from riddicc: Hi! When I send a 800Hz sine wave with rate 12345 to pcm.outmic and when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)), then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate). 1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345 2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav twinkle makes even bigger gaps, when I let it use pcm.micend as microphone... But with hw:Generic,0,0 as mic device twinkle works fine... https://github.com/LubosD/twinkle/issues/207 "samplerate_best" and "samplerate_order" seems to make it worse... How can I fix that? Thx. Bye. ![audacity screenshot](https://user-images.githubusercontent.com/33246439/81384628-7ad… Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

[PATCH 1/2] dt-bindings: Added device tree binding for max98390
by Steve Lee 09 May '20

09 May '20

Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt new file mode 100644 index 000000000000..147dfd88cd3b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98390.txt @@ -0,0 +1,26 @@ +Maxim Integrated MAX98390 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98390" + + - reg : the I2C address of the device. + +Optional properties: + + - maxim,temperature_calib + u32. The calculated temperature data was measured while doing the calibration. Data calibration : Temp / 100 * 2^12 + + - maxim,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + +Example: + +codec: max98390@38 { + compatible = "maxim,max98390"; + reg = <0x38>; + maxim,temperature_calib = <1024>; + maxim,r0_calib = <0x224050>; +}; -- 2.17.1

1 0

[PATCH] ASoC: cros_ec_codec: allocate shash_desc dynamically
by Arnd Bergmann 08 May '20

08 May '20

The wov_hotword_model_put() function has multiple large variables on its stack, the largest of which is the result of SHASH_DESC_ON_STACK(). In total, this exceeds the warning limit for 32-bit architectures: sound/soc/codecs/cros_ec_codec.c:776:12: error: stack frame size of 1152 bytes in function 'wov_hotword_model_put' [-Werror,-Wframe-larger-than=] The function already has a dynamic crypto_alloc_shash() allocation, so using kmalloc() for the descriptor is correct as well and does not introduce any additional failure scenarios. With this, the stack usage of wov_hotword_model_put() gets reduced to 480 bytes in my test configuration. Fixes: b6bc07d4360d ("ASoC: cros_ec_codec: support WoV") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/codecs/cros_ec_codec.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index d3dc42aa6825..1948bc6971f6 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -108,22 +108,23 @@ static int calculate_sha256(struct cros_ec_codec_priv *priv, uint8_t *buf, uint32_t size, uint8_t *digest) { struct crypto_shash *tfm; + struct shash_desc *desc; tfm = crypto_alloc_shash("sha256", CRYPTO_ALG_TYPE_SHASH, 0); if (IS_ERR(tfm)) { dev_err(priv->dev, "can't alloc shash\n"); return PTR_ERR(tfm); } - - { - SHASH_DESC_ON_STACK(desc, tfm); - - desc->tfm = tfm; - - crypto_shash_digest(desc, buf, size, digest); - shash_desc_zero(desc); + desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL); + if (!desc) { + crypto_free_shash(tfm); + return -ENOMEM; } + desc->tfm = tfm; + crypto_shash_digest(desc, buf, size, digest); + shash_desc_zero(desc); + kfree(desc); crypto_free_shash(tfm); #ifdef DEBUG -- 2.26.0

3 2

[PATCH] ASoC: qcom: Use devm_platform_ioremap_resource_byname() to simplify code
by Tang Bin 08 May '20

08 May '20

Use devm_platform_ioremap_resource_byname() instead of platform_get_resource_byname() + devm_ioremap_resource(). Signed-off-by: Zhang Shengju <zhangshengju(a)cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/qcom/lpass-cpu.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index dbce7e92b..885c1f2e7 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -417,7 +417,6 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev) { struct lpass_data *drvdata; struct device_node *dsp_of_node; - struct resource *res; struct lpass_variant *variant; struct device *dev = &pdev->dev; const struct of_device_id *match; @@ -442,9 +441,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev) drvdata->variant = (struct lpass_variant *)match->data; variant = drvdata->variant; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpass-lpaif"); - - drvdata->lpaif = devm_ioremap_resource(&pdev->dev, res); + drvdata->lpaif = devm_platform_ioremap_resource_byname(pdev, + "lpass-lpaif") if (IS_ERR((void const __force *)drvdata->lpaif)) { dev_err(&pdev->dev, "error mapping reg resource: %ld\n", PTR_ERR((void const __force *)drvdata->lpaif)); -- 2.20.1.windows.1

3 3

[PATCH] ASoC: mxs-saif: Add variable dev to simplify code
by Tang Bin 08 May '20

08 May '20

Add variable 'dev' to make the code cleaner in the function mxs_saif_probe(). And now that the function mxs_saif_mclk_init() have defined the variables 'ret' as the error returned value, then it should be used instead in this place. Signed-off-by: Zhang Shengju <zhangshengju(a)cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/mxs/mxs-saif.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index dc197883e..f4e441183 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -719,7 +719,7 @@ static int mxs_saif_mclk_init(struct platform_device *pdev) if (ret == -EEXIST) return 0; dev_err(&pdev->dev, "failed to register mclk: %d\n", ret); - return PTR_ERR(clk); + return ret; } ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); @@ -732,6 +732,7 @@ static int mxs_saif_mclk_init(struct platform_device *pdev) static int mxs_saif_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; struct mxs_saif *saif; int irq, ret; struct device_node *master; @@ -739,7 +740,7 @@ static int mxs_saif_probe(struct platform_device *pdev) if (!np) return -EINVAL; - saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL); + saif = devm_kzalloc(dev, sizeof(*saif), GFP_KERNEL); if (!saif) return -ENOMEM; @@ -750,7 +751,7 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->id = ret; if (saif->id >= ARRAY_SIZE(mxs_saif)) { - dev_err(&pdev->dev, "get wrong saif id\n"); + dev_err(dev, "get wrong saif id\n"); return -EINVAL; } @@ -770,18 +771,17 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->master_id = ret; if (saif->master_id >= ARRAY_SIZE(mxs_saif)) { - dev_err(&pdev->dev, "get wrong master id\n"); + dev_err(dev, "get wrong master id\n"); return -EINVAL; } } mxs_saif[saif->id] = saif; - saif->clk = devm_clk_get(&pdev->dev, NULL); + saif->clk = devm_clk_get(dev, NULL); if (IS_ERR(saif->clk)) { ret = PTR_ERR(saif->clk); - dev_err(&pdev->dev, "Cannot get the clock: %d\n", - ret); + dev_err(dev, "Cannot get the clock: %d\n", ret); return ret; } @@ -793,11 +793,11 @@ static int mxs_saif_probe(struct platform_device *pdev) if (irq < 0) return irq; - saif->dev = &pdev->dev; - ret = devm_request_irq(&pdev->dev, irq, mxs_saif_irq, 0, - dev_name(&pdev->dev), saif); + saif->dev = dev; + ret = devm_request_irq(dev, irq, mxs_saif_irq, 0, + dev_name(dev), saif); if (ret) { - dev_err(&pdev->dev, "failed to request irq\n"); + dev_err(dev, "failed to request irq\n"); return ret; } @@ -807,19 +807,19 @@ static int mxs_saif_probe(struct platform_device *pdev) if (saif->id == 0) { ret = mxs_saif_mclk_init(pdev); if (ret) - dev_warn(&pdev->dev, "failed to init clocks\n"); + dev_warn(dev, "failed to init clocks\n"); } - ret = devm_snd_soc_register_component(&pdev->dev, &mxs_saif_component, + ret = devm_snd_soc_register_component(dev, &mxs_saif_component, &mxs_saif_dai, 1); if (ret) { - dev_err(&pdev->dev, "register DAI failed\n"); + dev_err(dev, "register DAI failed\n"); return ret; } - ret = mxs_pcm_platform_register(&pdev->dev); + ret = mxs_pcm_platform_register(dev); if (ret) { - dev_err(&pdev->dev, "register PCM failed: %d\n", ret); + dev_err(dev, "register PCM failed: %d\n", ret); return ret; } -- 2.20.1.windows.1

2 1

[alsa-devel] [PATCH v4 00/12] ASoC: Add support to WCD9340/WCD9341 codec
by Srinivas Kandagatla 08 May '20

08 May '20

This patchset adds support to Qualcomm WCD9340/WCD9341 Codec which is a standalone Hi-Fi audio codec IC. This codec supports both I2S/I2C and SLIMbus audio interfaces. On slimbus interface it supports two data lanes; 16 Tx ports and 8 Rx ports. It has Five DACs and seven dedicated interpolators, Multibutton headset control (MBHC), Active noise cancellation, Sidetone paths, MAD (mic activity detection) and codec processing engine. It supports Class-H differential earpiece out and stereo single ended headphones out. This codec also has integrated SoundWire controller. Patchset for this is already sent for review at https://patchwork.kernel.org/cover/11185769/ This patchset has been tested on SDM845 based DragonBoard DB845c and Lenovo Yoga C630 laptop with WSA881x smart speaker amplifiers via soundwire and 4 DMICs. gpio controller patch does not have any link dependency, it can go by its own. Most of the code in this driver is rework of Qualcomm downstream drivers used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team. Thanks, srini Changes since v3: - Added new SLIMBus common bindings suggested by Rob. - renamed microvolts to microvolt in bindings as suggested by Rob - dumped pinctrl driver and added new simple gpio driver - few cosmetic cleanups in mfd driver. Srinivas Kandagatla (12): dt-bindings: SLIMBus: add slim devices optional properties ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec mfd: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add basic controls ASoC: wcd934x: add playback dapm widgets ASoC: wcd934x: add capture dapm widgets ASoC: wcd934x: add audio routings dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: wcd934x: Add support to wcd934x gpio controller ASoC: qcom: dt-bindings: Add compatible for DB845c and Lenovo Yoga ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga .../bindings/gpio/qcom,wcd934x-gpio.yaml | 47 + .../devicetree/bindings/slimbus/bus.txt | 10 + .../devicetree/bindings/sound/qcom,sdm845.txt | 5 +- .../bindings/sound/qcom,wcd934x.yaml | 163 + drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-wcd934x.c | 104 + drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/wcd934x.c | 306 + include/linux/mfd/wcd934x/registers.h | 531 ++ include/linux/mfd/wcd934x/wcd934x.h | 31 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd934x.c | 5084 +++++++++++++++++ sound/soc/qcom/sdm845.c | 86 +- 16 files changed, 6399 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml create mode 100644 drivers/gpio/gpio-wcd934x.c create mode 100644 drivers/mfd/wcd934x.c create mode 100644 include/linux/mfd/wcd934x/registers.h create mode 100644 include/linux/mfd/wcd934x/wcd934x.h create mode 100644 sound/soc/codecs/wcd934x.c -- 2.21.0

4 17