- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022 into DMI table
by Artem Lukyanov 30 Nov '22

30 Nov '22

This model requires an additional detection quirk to enable the internal microphone - BIOS doesn't seem to support AcpDmicConnected (nothing in acpidump output). Signed-off-by: Artem Lukyanov <dukzcry(a)ya.ru> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index d9715bea9..1f0b5527c 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -213,6 +213,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "TIMI"), + DMI_MATCH(DMI_PRODUCT_NAME, "Redmi Book Pro 14 2022"), + } + }, {} }; -- 2.36.2

3 3

arecord leaves doubled audio at end after a SIGTERM
by GitHub issues - edited 30 Nov '22

30 Nov '22

alsa-project/alsa-utils issue #179 was edited from chconnor: Hello: I issue a command like this: `arecord -t wav -c 1 -f S16_LE -r44100 -D hw:2,0 test.wav ` It works fine, but then I hit ctrl-C to terminate. This works, but the file has "junk" at the end that repeats the last fraction of a second. E.g. in this demo file I ctrl-C when I say the word "one", and the recording is like "three, two, on-on": https://caseyconnor.org/pub/audio/arecord_bug.wav It's as if it is mistakenly writing a buffer an extra time? (In my total ignorance and total lack of qualifications, I traced the code to [here](https://github.com/alsa-project/alsa-lib/blob/d28e8cb29485cc93f741b01…, but I get lost and can't see if anything is awry...) (Edit: version 1.2.6 on Lubuntu 22.04 with a Shure X2U interface) Issue URL : https://github.com/alsa-project/alsa-utils/issues/179 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

arecord leaves doubled audio at end after a SIGTERM
by GitHub issues - edited 30 Nov '22

30 Nov '22

alsa-project/alsa-utils issue #179 was edited from chconnor: Hello: I issue a command like this: `arecord -t wav -c 1 -f S16_LE -r44100 -D hw:2,0 test.wav ` It works fine, but then I hit ctrl-C to terminate. This works, but the file has "junk" at the end that repeats the last fraction of a second. E.g. in this demo file I ctrl-C when I say the word "one", and the recording is like "three, two, on-on": https://caseyconnor.org/pub/audio/arecord_bug.wav It's as if it is mistakenly writing a buffer an extra time? (In my total ignorance and total lack of qualifications, I traced the code to [here](https://github.com/alsa-project/alsa-lib/blob/d28e8cb29485cc93f741b01…, but I get lost and can't see if anything is awry...) Issue URL : https://github.com/alsa-project/alsa-utils/issues/179 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

arecord leaves doubled audio at end after a SIGTERM
by GitHub issues - opened 30 Nov '22

30 Nov '22

alsa-project/alsa-utils issue #179 was opened from chconnor: Hello: I issue a command like this: `arecord -t wav -c 1 -f S16_LE -r44100 -D hw:2,0 test.wav ` It works fine, but then I hit ctrl-C to terminate. This works, but the file has "junk" at the end that repeats the last fraction of a second. E.g. in this demo file I ctrl-C when I say the word "one", and the recording is like "three, two, on-on": http://caseyconnor.org/pub/audio/arecord_bug.wav It's as if it is mistakenly writing a buffer an extra time? (In my total ignorance and total lack of qualifications, I traced the code to [here](https://github.com/alsa-project/alsa-lib/blob/d28e8cb29485cc93f741b01…, but I get lost and can't see if anything is awry...) Issue URL : https://github.com/alsa-project/alsa-utils/issues/179 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v2 0/2] ASoC: Intel: avs: rt5682: Refactor jack handling
by Cezary Rojewski 29 Nov '22

29 Nov '22

Leftover from recent series [1]. Following changes are proposed for the rt5682 sound card driver: 1) Move jack unassignment from platform_device->remove() to dai_link->exit(). This is done to make jack init and deinit flows symmetric 2) Remove platform_device->remove() function 3) Simplify card->suspend_pre() and card->resume_post() by making use of snd_soc_card_get_codec_dai() helper Changes in v2: - fixed compilation of the first patch in the series by moving offending pieces to the second patch [1]: https://lore.kernel.org/alsa-devel/20221125184032.2565979-1-cezary.rojewski… Amadeusz Sławiński (2): ASoC: Intel: avs: rt5682: Add define for codec DAI name ASoC: Intel: avs: rt5682: Refactor jack handling sound/soc/intel/avs/boards/rt5682.c | 31 ++++++++++++----------------- 1 file changed, 13 insertions(+), 18 deletions(-) -- 2.25.1

2 3

[PATCH -next] ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
by Zhang Qilong 29 Nov '22

29 Nov '22

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by going to err_pm instead of err_clk. Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL") Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/codecs/pcm512x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 767463e82665..89059a673cf0 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -1634,7 +1634,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) if (val > 6) { dev_err(dev, "Invalid pll-in\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } pcm512x->pll_in = val; } @@ -1643,7 +1643,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) if (val > 6) { dev_err(dev, "Invalid pll-out\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } pcm512x->pll_out = val; } @@ -1652,12 +1652,12 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) dev_err(dev, "Error: both pll-in and pll-out, or none\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) { dev_err(dev, "Error: pll-in == pll-out\n"); ret = -EINVAL; - goto err_clk; + goto err_pm; } } #endif -- 2.25.1

2 1

[PATCH V3 0/6] ASoC: codecs: Add Awinic AW883XX audio amplifier driver
by wangweidong.a＠awinic.com 29 Nov '22

29 Nov '22

From: Weidong Wang <wangweidong.a(a)awinic.com> The Awinic AW883XX is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost convert Add a DT schema for describing Awinic AW883xx audio amplifiers. They are controlled using I2C. v2 -> v3 : i2c reads and writes are changed to regmap The monitor, calib, and spin files were deleted Deleted firmware load retry Linux version compatibility and driver version control were removed The global variable was deleted The renaming of dai was removed Platform compatibility was removed Simplified log information use module_i2c_driver Delete the custom interface and use the kernel standard interface Weidong Wang (6): ASoC: codecs: Add i2c and codec registration for aw883xx and their associated operation functions ASoC: codecs: Added configuration file parsing for aw883xx ASoC: codecs: Add aw883xx chip control logic, such as power-on and power-off ASoC: codecs: Realize aw883xx register configuration and register address file ASoC: dt-bindings: Add schema for "awinic,aw883xx" ASoC:codecs:aw883xx corresponds to the modified Makefile and Kconfig .../devicetree/bindings/sound/awinic,aw883xx.yaml | 60 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 7 + sound/soc/codecs/aw883xx/aw883xx.c | 1806 +++++++++++++++ sound/soc/codecs/aw883xx/aw883xx.h | 155 ++ sound/soc/codecs/aw883xx/aw883xx_bin_parse.c | 1294 +++++++++++ sound/soc/codecs/aw883xx/aw883xx_bin_parse.h | 145 ++ sound/soc/codecs/aw883xx/aw883xx_data_type.h | 148 ++ sound/soc/codecs/aw883xx/aw883xx_device.c | 1618 +++++++++++++ sound/soc/codecs/aw883xx/aw883xx_device.h | 544 +++++ sound/soc/codecs/aw883xx/aw883xx_init.c | 549 +++++ sound/soc/codecs/aw883xx/aw883xx_pid_2049_reg.h | 2387 ++++++++++++++++++++ 12 files changed, 8723 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/awinic,aw883xx.yaml create mode 100644 sound/soc/codecs/aw883xx/aw883xx.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_bin_parse.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx_bin_parse.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_data_type.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_device.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx_device.h create mode 100644 sound/soc/codecs/aw883xx/aw883xx_init.c create mode 100644 sound/soc/codecs/aw883xx/aw883xx_pid_2049_reg.h -- 2.7.4

4 32

[PATCH 0/2] ASoC: Add a driver for the Iron Device SMA1303 Amp
by Kiseok Jo 29 Nov '22

29 Nov '22

This adds basic audio support for the Iron Device SMA1303 amplifier. Kiseok Jo (2): ASoC: sma1303: Add driver for Iron Device SMA1303 Amp ASoC: dt-bindings: sma1303: Iron Device SMA1303 Amp .../bindings/sound/irondevice,sma1303.yaml | 40 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1303.c | 2119 +++++++++++++++++ sound/soc/codecs/sma1303.h | 609 +++++ 6 files changed, 2779 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml create mode 100644 sound/soc/codecs/sma1303.c create mode 100644 sound/soc/codecs/sma1303.h -- 2.30.2

2 3

[PATCH 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 29 Nov '22

29 Nov '22

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Jiaxin Yu (3): drm: bridge: it6505: bridge to hdmi-codec ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drivers/gpu/drm/bridge/ite-it6505.c | 36 +++++++++++++++--- include/sound/hdmi-codec.h | 6 +++ sound/soc/codecs/hdmi-codec.c | 37 +++++++++++++++++-- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 71 insertions(+), 12 deletions(-) -- 2.18.0

2 4

[PATCH 00/11] ASoC: Intel: avs: Refactor jack handling
by Cezary Rojewski 29 Nov '22

29 Nov '22

For all the boards included in this patchset, a similar set of changes is proposed: 1) Move jack unassignment from platform_device->remove() to dai_link->exit(). This is done to make jack init and deinit flows symmetric 2) Remove platform_device->remove() function 3) Simplify card->suspend_pre() and card->resume_post() by making use of snd_soc_card_get_codec_dai() helper While bdw_rt286 board - which is utilized by the catpt-driver - is definitely not part of "avs", same treatment applies. And thus decided to make it part of this series instead of sending it separately. Amadeusz Sławiński (10): ASoC: Intel: avs: da7219: Refactor jack handling ASoC: Intel: avs: nau8825: Refactor jack handling ASoC: Intel: avs: rt274: Refer to DAI name through a constant ASoC: Intel: avs: rt274: Refactor jack handling ASoC: Intel: avs: rt286: Add define for codec DAI name ASoC: Intel: avs: rt286: Refactor jack handling ASoC: Intel: avs: rt298: Add define for codec DAI name ASoC: Intel: avs: rt298: Refactor jack handling ASoC: Intel: avs: rt5682: Add define for codec DAI name ASoC: Intel: avs: rt5682: Refactor jack handling Cezary Rojewski (1): ASoC: Intel: bdw_rt286: Refactor jack handling sound/soc/intel/avs/boards/da7219.c | 34 +++++++---------- sound/soc/intel/avs/boards/nau8825.c | 35 ++++++------------ sound/soc/intel/avs/boards/rt274.c | 30 ++++++--------- sound/soc/intel/avs/boards/rt286.c | 37 ++++++++----------- sound/soc/intel/avs/boards/rt298.c | 37 ++++++++----------- sound/soc/intel/avs/boards/rt5682.c | 31 +++++++--------- sound/soc/intel/boards/bdw_rt286.c | 55 ++++++++-------------------- 7 files changed, 95 insertions(+), 164 deletions(-) -- 2.25.1

3 14