- Alsa-devel - mailman.alsa-project.org

Lenovo Yoga 7 2-in-1 16AKP10 volume control bug
by Sandro Gähler 12 Sep '25

12 Sep '25

Hello I would like to report a bug for the brand new Lenovo Yoga 7 2-in-1 16AKP10. It has the same sound chip and also the same volume control bug as several older models. I thus assume that the same workaround, written by Philipp Jungkamp and later by Pascal Gross, will also work for this model. There are several lines with laptops that apply this workaround, for example this line in linux/sound/pci/hda/patch_realtek.c: SND_PCI_QUIRK(0x17aa, 0x3801, "Lenovo Yoga9 14IAP7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN) Could you please add this line for my model? SND_PCI_QUIRK(0x????, 0x????, "Lenovo Yoga 7 2-in-1 16AKP10", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), Please advise on how to determine the first two parameters. Thanks a lot for your great work and support. Best regards, --Sandro Gähler

1 1

[PATCH v4 1/6] ASoC: ops: improve snd_soc_get_volsw
by Niranjan H Y 11 Sep '25

11 Sep '25

* add error handling in case register read fails * add support for clamping the values if the register value read is greater than max value Signed-off-by: Niranjan H Y <niranjan.hy(a)ti.com> --- sound/soc/soc-ops.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index a629e0eac..59e91741b 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -111,10 +111,14 @@ int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol, EXPORT_SYMBOL_GPL(snd_soc_put_enum_double); static int soc_mixer_reg_to_ctl(struct soc_mixer_control *mc, unsigned int reg_val, - unsigned int mask, unsigned int shift, int max) + unsigned int mask, unsigned int shift, int max, + bool clamp) { int val = (reg_val >> shift) & mask; + if (clamp) + val = clamp(val, 0, mc->max); + if (mc->sign_bit) val = sign_extend32(val, mc->sign_bit); @@ -245,29 +249,44 @@ static int soc_put_volsw(struct snd_kcontrol *kcontrol, static int soc_get_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc, int mask, int max) + struct soc_mixer_control *mc, int mask, int max, + bool clamp) { struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); unsigned int reg_val; - int val; + int val, ret = 0; reg_val = snd_soc_component_read(component, mc->reg); - val = soc_mixer_reg_to_ctl(mc, reg_val, mask, mc->shift, max); + val = reg_val; + if (val < 0) { + ret = val; + goto get_volsw_done; + } + + val = soc_mixer_reg_to_ctl(mc, reg_val, mask, mc->shift, max, clamp); ucontrol->value.integer.value[0] = val; if (snd_soc_volsw_is_stereo(mc)) { if (mc->reg == mc->rreg) { - val = soc_mixer_reg_to_ctl(mc, reg_val, mask, mc->rshift, max); + val = soc_mixer_reg_to_ctl(mc, reg_val, mask, mc->rshift, + max, clamp); } else { reg_val = snd_soc_component_read(component, mc->rreg); - val = soc_mixer_reg_to_ctl(mc, reg_val, mask, mc->shift, max); + val = reg_val; + if (val < 0) { + ret = val; + goto get_volsw_done; + } + val = soc_mixer_reg_to_ctl(mc, reg_val, mask, + mc->shift, max, clamp); } ucontrol->value.integer.value[1] = val; } - return 0; +get_volsw_done: + return ret; } /** @@ -330,7 +349,8 @@ int snd_soc_get_volsw(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; unsigned int mask = soc_mixer_mask(mc); - return soc_get_volsw(kcontrol, ucontrol, mc, mask, mc->max - mc->min); + return soc_get_volsw(kcontrol, ucontrol, mc, mask, + mc->max - mc->min, false); } EXPORT_SYMBOL_GPL(snd_soc_get_volsw); @@ -372,7 +392,7 @@ int snd_soc_get_volsw_sx(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; unsigned int mask = soc_mixer_sx_mask(mc); - return soc_get_volsw(kcontrol, ucontrol, mc, mask, mc->max); + return soc_get_volsw(kcontrol, ucontrol, mc, mask, mc->max, false); } EXPORT_SYMBOL_GPL(snd_soc_get_volsw_sx); -- 2.45.2

3 7

[PATCH v1] ALSA: hda/tas2781: Fix a potential race condition that causes a NULL pointer in case no efi.get_variable exsits
by Shenghao Ding 11 Sep '25

11 Sep '25

A a potential race condition reported by one of my customers that leads to a NULL pointer dereference, where the call to efi.get_variable should be guarded with efi_rt_services_supported() to ensure that function exists. Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- sound/hda/codecs/side-codecs/tas2781_hda.c | 5 +++++ sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/sound/hda/codecs/side-codecs/tas2781_hda.c b/sound/hda/codecs/side-codecs/tas2781_hda.c index 536940c78f00..96e6d82dc69e 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda.c @@ -193,6 +193,11 @@ int tas2781_save_calibration(struct tas2781_hda *hda) efi_status_t status; int i; + if (!efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE)) { + dev_err(p->dev, "%s: NO EFI FOUND!\n", __func__); + return -EINVAL; + } + if (hda->catlog_id < LENOVO) efi_guid = tasdev_fct_efi_guid[hda->catlog_id]; diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c index 008dbe1490a7..4dea442d8c30 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c @@ -317,6 +317,11 @@ static int tas2563_save_calibration(struct tas2781_hda *h) unsigned int attr; int ret, i, j, k; + if (!efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE)) { + dev_err(p->dev, "%s: NO EFI FOUND!\n", __func__); + return -EINVAL; + } + cd->cali_dat_sz_per_dev = TAS2563_CAL_DATA_SIZE * TASDEV_CALIB_N; /* extra byte for each device is the device number */ -- 2.43.0

2 1

Internal microphone (Conexant SN6140) detected but shows inactive/unplugged on Lenovo IdeaPad Slim 5 16AKP10 83HY after alsa-ucm-conf 1.2.14
by GitHub issues - edited 11 Sep '25

11 Sep '25

alsa-project/alsa-ucm-conf issue #612 was edited from JayJaber: On a Lenovo IdeaPad Slim 5 16AKP10 83HY with Conexant SN6140 codec, the internal microphone works correctly with alsa-ucm-conf 1.2.13-2, but with 1.2.14 and newer it is detected but shows up as inactive/unplugged. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/612 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Internal microphone (Conexant SN6140) detected but shows inactive/unplugged on Lenovo IdeaPad Slim 5 16AKP10 83HY after alsa-ucm-conf 1.2.14
by GitHub issues - edited 11 Sep '25

11 Sep '25

alsa-project/alsa-ucm-conf issue #612 was edited from JayJaber: On a Lenovo IdeaPad Slim 5 16AKP10 83HY with Conexant SN6140 codec, the internal microphone works correctly with alsa-ucm-conf 1.2.13-2, but with 1.2.14 and newer it is not detected and shows up as inactive/unplugged. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/612 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Internal microphone (Conexant SN6140) not detected on Lenovo IdeaPad Slim 5 16AKP10 83HY after alsa-ucm-conf 1.2.14
by GitHub issues - opened 11 Sep '25

11 Sep '25

alsa-project/alsa-ucm-conf issue #612 was opened from JayJaber: On a Lenovo IdeaPad Slim 5 16AKP10 83HY with Conexant SN6140 codec, the internal microphone works correctly with alsa-ucm-conf 1.2.13-2, but with 1.2.14 and newer it is not detected and shows up as inactive/unplugged. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/612 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[tiwai-sound:test/auto-cleanup 208/210] sound/sparc/amd7930.c:357:45: error: 'flags' undeclared
by kernel test robot 10 Sep '25

10 Sep '25

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git test/auto-cleanup head: f29244cff0185975fee4f55293cca61cfd83af3e commit: db8ed7441c876cac679db2869b87b26633c89bde [208/210] ALSA: sparc/amd7930: Use guard() for spin locks config: sparc64-randconfig-002-20250910 (https://download.01.org/0day-ci/archive/20250911/202509110130.PlGyYo4k-lkp@…) compiler: sparc64-linux-gcc (GCC) 12.5.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250911/202509110130.PlGyYo4k-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202509110130.PlGyYo4k-lkp@intel.com/ All errors (new ones prefixed by >>): sound/sparc/amd7930.c: In function 'amd7930_enable_ints': >> sound/sparc/amd7930.c:357:45: error: 'flags' undeclared (first use in this function) 357 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ sound/sparc/amd7930.c:357:45: note: each undeclared identifier is reported only once for each function it appears in In file included from include/linux/module.h:17, from sound/sparc/amd7930.c:33: >> include/linux/cleanup.h:291:17: error: too many arguments to function 'class_spinlock_irqsave_constructor' 291 | class_##_name##_constructor | ^~~~~~ include/linux/cleanup.h:401:9: note: in expansion of macro 'CLASS' 401 | CLASS(_name, __UNIQUE_ID(guard)) | ^~~~~ sound/sparc/amd7930.c:357:9: note: in expansion of macro 'guard' 357 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ include/linux/cleanup.h:477:33: note: declared here 477 | static inline class_##_name##_t class_##_name##_constructor(_type *l) \ | ^~~~~~ include/linux/cleanup.h:496:1: note: in expansion of macro '__DEFINE_LOCK_GUARD_1' 496 | __DEFINE_LOCK_GUARD_1(_name, _type, _lock) | ^~~~~~~~~~~~~~~~~~~~~ include/linux/spinlock.h:585:1: note: in expansion of macro 'DEFINE_LOCK_GUARD_1' 585 | DEFINE_LOCK_GUARD_1(spinlock_irqsave, spinlock_t, | ^~~~~~~~~~~~~~~~~~~ sound/sparc/amd7930.c: In function 'amd7930_disable_ints': sound/sparc/amd7930.c:365:45: error: 'flags' undeclared (first use in this function) 365 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ >> include/linux/cleanup.h:291:17: error: too many arguments to function 'class_spinlock_irqsave_constructor' 291 | class_##_name##_constructor | ^~~~~~ include/linux/cleanup.h:401:9: note: in expansion of macro 'CLASS' 401 | CLASS(_name, __UNIQUE_ID(guard)) | ^~~~~ sound/sparc/amd7930.c:365:9: note: in expansion of macro 'guard' 365 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ include/linux/cleanup.h:477:33: note: declared here 477 | static inline class_##_name##_t class_##_name##_constructor(_type *l) \ | ^~~~~~ include/linux/cleanup.h:496:1: note: in expansion of macro '__DEFINE_LOCK_GUARD_1' 496 | __DEFINE_LOCK_GUARD_1(_name, _type, _lock) | ^~~~~~~~~~~~~~~~~~~~~ include/linux/spinlock.h:585:1: note: in expansion of macro 'DEFINE_LOCK_GUARD_1' 585 | DEFINE_LOCK_GUARD_1(spinlock_irqsave, spinlock_t, | ^~~~~~~~~~~~~~~~~~~ -- amd7930.c: In function 'amd7930_enable_ints': amd7930.c:357:45: error: 'flags' undeclared (first use in this function) 357 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ amd7930.c:357:45: note: each undeclared identifier is reported only once for each function it appears in In file included from include/linux/module.h:17, from amd7930.c:33: >> include/linux/cleanup.h:291:17: error: too many arguments to function 'class_spinlock_irqsave_constructor' 291 | class_##_name##_constructor | ^~~~~~ include/linux/cleanup.h:401:9: note: in expansion of macro 'CLASS' 401 | CLASS(_name, __UNIQUE_ID(guard)) | ^~~~~ amd7930.c:357:9: note: in expansion of macro 'guard' 357 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ include/linux/cleanup.h:477:33: note: declared here 477 | static inline class_##_name##_t class_##_name##_constructor(_type *l) \ | ^~~~~~ include/linux/cleanup.h:496:1: note: in expansion of macro '__DEFINE_LOCK_GUARD_1' 496 | __DEFINE_LOCK_GUARD_1(_name, _type, _lock) | ^~~~~~~~~~~~~~~~~~~~~ include/linux/spinlock.h:585:1: note: in expansion of macro 'DEFINE_LOCK_GUARD_1' 585 | DEFINE_LOCK_GUARD_1(spinlock_irqsave, spinlock_t, | ^~~~~~~~~~~~~~~~~~~ amd7930.c: In function 'amd7930_disable_ints': amd7930.c:365:45: error: 'flags' undeclared (first use in this function) 365 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ >> include/linux/cleanup.h:291:17: error: too many arguments to function 'class_spinlock_irqsave_constructor' 291 | class_##_name##_constructor | ^~~~~~ include/linux/cleanup.h:401:9: note: in expansion of macro 'CLASS' 401 | CLASS(_name, __UNIQUE_ID(guard)) | ^~~~~ amd7930.c:365:9: note: in expansion of macro 'guard' 365 | guard(spinlock_irqsave)(&amd->lock, flags); | ^~~~~ include/linux/cleanup.h:477:33: note: declared here 477 | static inline class_##_name##_t class_##_name##_constructor(_type *l) \ | ^~~~~~ include/linux/cleanup.h:496:1: note: in expansion of macro '__DEFINE_LOCK_GUARD_1' 496 | __DEFINE_LOCK_GUARD_1(_name, _type, _lock) | ^~~~~~~~~~~~~~~~~~~~~ include/linux/spinlock.h:585:1: note: in expansion of macro 'DEFINE_LOCK_GUARD_1' 585 | DEFINE_LOCK_GUARD_1(spinlock_irqsave, spinlock_t, | ^~~~~~~~~~~~~~~~~~~ vim +/flags +357 sound/sparc/amd7930.c 353 354 /* Enable chip interrupts. The amd->lock is not held. */ 355 static __inline__ void amd7930_enable_ints(struct snd_amd7930 *amd) 356 { > 357 guard(spinlock_irqsave)(&amd->lock, flags); 358 sbus_writeb(AMR_INIT, amd->regs + AMD7930_CR); 359 sbus_writeb(AM_INIT_ACTIVE, amd->regs + AMD7930_DR); 360 } 361 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH v3 1/4] ASoc: tas2783A: Add soundwire based codec driver
by Niranjan H Y 10 Sep '25

10 Sep '25

TAS2783 is mono digital input class-D Smart Amplifier based on MIPI Alliance Soundwire interface. The driver supports loading the algorithm coefficients for one or more tas2783 chips. Signed-off-by: Niranjan H Y <niranjan.hy(a)ti.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- v3: - fix compilation issue for ARCH=hexagon clang compiler - Kconfig - use depends on for SOUNDWIRE and EFI instead of select - add REGMAP_SOUNDWIRE_MBQ v2: - append Volume to amp gain mixer control - remove unwanted debug log --- sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 1417 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 107 +++ 4 files changed, 1540 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index b8d58d2fe..a7d25ab7a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -266,6 +266,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783_SDW imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -2074,6 +2075,19 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783_SDW + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP_SOUNDWIRE + select REGMAP_SOUNDWIRE_MBQ + select CRC32 + help + Enable support for Texas Instruments TAS2783A Digital input + mono Class-D and DSP-inside audio power amplifiers. TAS2783 + driver implements a flexible and configurable algorithm + cofficient setting, for one, two or multiple TAS2783 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a476d6c45..1920fa17b 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -316,6 +316,7 @@ snd-soc-tas2781-comlib-y := tas2781-comlib.o snd-soc-tas2781-comlib-i2c-y := tas2781-comlib-i2c.o snd-soc-tas2781-fmwlib-y := tas2781-fmwlib.o snd-soc-tas2781-i2c-y := tas2781-i2c.o +snd-soc-tas2783-sdw-y := tas2783-sdw.o snd-soc-tfa9879-y := tfa9879.o snd-soc-tfa989x-y := tfa989x.o snd-soc-tlv320adc3xxx-y := tlv320adc3xxx.o @@ -732,6 +733,7 @@ obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB_I2C) += snd-soc-tas2781-comlib-i2c.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783_SDW) += snd-soc-tas2783-sdw.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000..ddadfb7c5 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,1417 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2783 driver implements a flexible and configurable +// algo coefficient setting for single TAS2783 chips. +// +// Author: Niranjan H Y <niranjanhy(a)ti.com> +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> + +#include <linux/unaligned.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <sound/pcm_params.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/wait.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2783.h" + +#define TIMEOUT_FW_DL_MS (3000) +#define FW_DL_OFFSET 36 +#define FW_FL_HDR 12 +#define TAS2783_PROBE_TIMEOUT 5000 +#define TAS2783_CALI_GUID EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, \ + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92) + +#if !IS_ENABLED(CONFIG_SND_SOC_TAS2783_UTIL) +static void tas25xx_register_misc(struct sdw_slave *peripheral) {} +static void tas25xx_deregister_misc(void) {} +#endif + +static const u32 tas2783_cali_reg[] = { + TAS2783_CAL_R0, + TAS2783_CAL_INVR0, + TAS2783_CAL_R0LOW, + TAS2783_CAL_POWER, + TAS2783_CAL_TLIM, +}; + +struct bin_header_t { + u16 vendor_id; + u16 version; + u32 file_id; + u32 length; +}; + +struct calibration_data { + u32 is_valid; + unsigned long read_sz; + u8 data[TAS2783_CALIB_DATA_SZ]; +}; + +struct tas2783_prv { + struct snd_soc_component *component; + struct calibration_data cali_data; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + /* calibration */ + struct mutex calib_lock; + /* pde and firmware download */ + struct mutex pde_lock; + struct regmap *regmap; + struct device *dev; + struct class *class; + struct attribute_group *cal_attr_groups; + struct tm tm; + u8 rca_binaryname[64]; + u8 dev_name[32]; + bool hw_init; + /* wq for firmware download */ + wait_queue_head_t fw_wait; + bool fw_dl_task_done; + bool fw_dl_success; +}; + +static const struct reg_default tas2783_reg_default[] = { + {TAS2783_AMP_LEVEL, 0x28}, + {TASDEV_REG_SDW(0, 0, 0x03), 0x28}, + {TASDEV_REG_SDW(0, 0, 0x04), 0x21}, + {TASDEV_REG_SDW(0, 0, 0x05), 0x41}, + {TASDEV_REG_SDW(0, 0, 0x06), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x07), 0x20}, + {TASDEV_REG_SDW(0, 0, 0x08), 0x09}, + {TASDEV_REG_SDW(0, 0, 0x09), 0x02}, + {TASDEV_REG_SDW(0, 0, 0x0a), 0x0a}, + {TASDEV_REG_SDW(0, 0, 0x0c), 0x10}, + {TASDEV_REG_SDW(0, 0, 0x0d), 0x13}, + {TASDEV_REG_SDW(0, 0, 0x0e), 0xc2}, + {TASDEV_REG_SDW(0, 0, 0x0f), 0x40}, + {TASDEV_REG_SDW(0, 0, 0x10), 0x04}, + {TASDEV_REG_SDW(0, 0, 0x13), 0x13}, + {TASDEV_REG_SDW(0, 0, 0x14), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x15), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x16), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x17), 0x80}, + {TAS2783_DVC_LVL, 0x00}, + {TASDEV_REG_SDW(0, 0, 0x1b), 0x61}, + {TASDEV_REG_SDW(0, 0, 0x1c), 0x36}, + {TASDEV_REG_SDW(0, 0, 0x1d), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x1f), 0x01}, + {TASDEV_REG_SDW(0, 0, 0x20), 0x2e}, + {TASDEV_REG_SDW(0, 0, 0x21), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x34), 0x06}, + {TASDEV_REG_SDW(0, 0, 0x35), 0xbd}, + {TASDEV_REG_SDW(0, 0, 0x36), 0xad}, + {TASDEV_REG_SDW(0, 0, 0x37), 0xa8}, + {TASDEV_REG_SDW(0, 0, 0x38), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x3b), 0xfc}, + {TASDEV_REG_SDW(0, 0, 0x3d), 0xdd}, + {TASDEV_REG_SDW(0, 0, 0x40), 0xf6}, + {TASDEV_REG_SDW(0, 0, 0x41), 0x14}, + {TASDEV_REG_SDW(0, 0, 0x5c), 0x19}, + {TASDEV_REG_SDW(0, 0, 0x5d), 0x80}, + {TASDEV_REG_SDW(0, 0, 0x63), 0x48}, + {TASDEV_REG_SDW(0, 0, 0x65), 0x08}, + {TASDEV_REG_SDW(0, 0, 0x66), 0xb2}, + {TASDEV_REG_SDW(0, 0, 0x67), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6a), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x6b), 0xfb}, + {TASDEV_REG_SDW(0, 0, 0x6c), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6d), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6e), 0x1a}, + {TASDEV_REG_SDW(0, 0, 0x6f), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x70), 0x96}, + {TASDEV_REG_SDW(0, 0, 0x71), 0x02}, + {TASDEV_REG_SDW(0, 0, 0x73), 0x08}, + {TASDEV_REG_SDW(0, 0, 0x75), 0xe0}, + {TASDEV_REG_SDW(0, 0, 0x7a), 0x60}, + {TASDEV_REG_SDW(0, 0, 0x60), 0x21}, + {TASDEV_REG_SDW(0, 1, 0x02), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x17), 0xc0}, + {TASDEV_REG_SDW(0, 1, 0x19), 0x60}, + {TASDEV_REG_SDW(0, 1, 0x35), 0x75}, + {TASDEV_REG_SDW(0, 1, 0x3d), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x3e), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x3f), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x40), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x41), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x42), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x43), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x44), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x45), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x47), 0xab}, + {TASDEV_REG_SDW(0, 0xfd, 0x0d), 0x0d}, + {TASDEV_REG_SDW(0, 0xfd, 0x39), 0x00}, + {TASDEV_REG_SDW(0, 0xfd, 0x3e), 0x00}, + {TASDEV_REG_SDW(0, 0xfd, 0x45), 0x00}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x02, 1), 0x9c00}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 2), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x05, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x05, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 3), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 4), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 5), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 6), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 7), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 3), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 4), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 5), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 6), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 7), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 8), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 9), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xa), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xb), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xc), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xd), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xe), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xf), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x1, 0), 0x3}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x10, 0), 0x3}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x05, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x10, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_TG23, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x07, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x09, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x0a, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x10, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x14, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x15, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x16, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_UDMPU23, 0x10, 0), 0x0}, +}; + +static const struct reg_sequence tas2783_init_seq[] = { + REG_SEQ0(SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0x00), 0x04), + REG_SEQ0(0x00800418, 0x00), + REG_SEQ0(0x00800419, 0x00), + REG_SEQ0(0x0080041a, 0x00), + REG_SEQ0(0x0080041b, 0x00), + REG_SEQ0(0x00800428, 0x40), + REG_SEQ0(0x00800429, 0x00), + REG_SEQ0(0x0080042a, 0x00), + REG_SEQ0(0x0080042b, 0x00), + REG_SEQ0(SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x1, 0x00), 0x00), + REG_SEQ0(0x0080005c, 0xD9), + REG_SEQ0(0x00800082, 0x20), + REG_SEQ0(0x008000a1, 0x00), + REG_SEQ0(0x00800097, 0xc8), + REG_SEQ0(0x00800099, 0x20), + REG_SEQ0(0x008000c7, 0xaa), + REG_SEQ0(0x008000b5, 0x74), + REG_SEQ0(0x00800082, 0x20), + REG_SEQ0(0x00807e8d, 0x0d), + REG_SEQ0(0x00807eb9, 0x53), + REG_SEQ0(0x00807ebe, 0x42), + REG_SEQ0(0x00807ec5, 0x37), + REG_SEQ0(0x00800066, 0x92), + REG_SEQ0(0x00800003, 0x28), + REG_SEQ0(0x00800004, 0x21), + REG_SEQ0(0x00800005, 0x41), + REG_SEQ0(0x00800006, 0x00), + REG_SEQ0(0x00800007, 0x20), + REG_SEQ0(0x0080000c, 0x10), + REG_SEQ0(0x00800013, 0x08), + REG_SEQ0(0x00800015, 0x00), + REG_SEQ0(0x00800017, 0x80), + REG_SEQ0(0x0080001a, 0x00), + REG_SEQ0(0x0080001b, 0x22), + REG_SEQ0(0x0080001c, 0x36), + REG_SEQ0(0x0080001d, 0x01), + REG_SEQ0(0x0080001f, 0x00), + REG_SEQ0(0x00800020, 0x2e), + REG_SEQ0(0x00800034, 0x06), + REG_SEQ0(0x00800035, 0xb9), + REG_SEQ0(0x00800036, 0xad), + REG_SEQ0(0x00800037, 0xa8), + REG_SEQ0(0x00800038, 0x00), + REG_SEQ0(0x0080003b, 0xfc), + REG_SEQ0(0x0080003d, 0xdd), + REG_SEQ0(0x00800040, 0xf6), + REG_SEQ0(0x00800041, 0x14), + REG_SEQ0(0x0080005c, 0x19), + REG_SEQ0(0x0080005d, 0x80), + REG_SEQ0(0x00800063, 0x48), + REG_SEQ0(0x00800065, 0x08), + REG_SEQ0(0x00800067, 0x00), + REG_SEQ0(0x0080006a, 0x12), + REG_SEQ0(0x0080006b, 0x7b), + REG_SEQ0(0x0080006c, 0x00), + REG_SEQ0(0x0080006d, 0x00), + REG_SEQ0(0x0080006e, 0x1a), + REG_SEQ0(0x0080006f, 0x00), + REG_SEQ0(0x00800070, 0x96), + REG_SEQ0(0x00800071, 0x02), + REG_SEQ0(0x00800073, 0x08), + REG_SEQ0(0x00800075, 0xe0), + REG_SEQ0(0x0080007a, 0x60), + REG_SEQ0(0x008000bd, 0x00), + REG_SEQ0(0x008000be, 0x00), + REG_SEQ0(0x008000bf, 0x00), + REG_SEQ0(0x008000c0, 0x00), + REG_SEQ0(0x008000c1, 0x00), + REG_SEQ0(0x008000c2, 0x00), + REG_SEQ0(0x008000c3, 0x00), + REG_SEQ0(0x008000c4, 0x00), + REG_SEQ0(0x008000c5, 0x00), + REG_SEQ0(0x00800008, 0x49), + REG_SEQ0(0x00800009, 0x02), + REG_SEQ0(0x0080000a, 0x1a), + REG_SEQ0(0x0080000d, 0x93), + REG_SEQ0(0x0080000e, 0x82), + REG_SEQ0(0x0080000f, 0x42), + REG_SEQ0(0x00800010, 0x84), + REG_SEQ0(0x00800014, 0x0a), + REG_SEQ0(0x00800016, 0x00), + REG_SEQ0(0x00800060, 0x21), +}; + +static int tas2783_sdca_mbq_size(struct device *dev, u32 reg) +{ + switch (reg) { + case 0x000 ... 0x080: /* Data port 0. */ + case 0x100 ... 0x140: /* Data port 1. */ + case 0x200 ... 0x240: /* Data port 2. */ + case 0x300 ... 0x340: /* Data port 3. */ + case 0x400 ... 0x440: /* Data port 4. */ + case 0x500 ... 0x540: /* Data port 5. */ + case 0x800000 ... 0x803fff: /* Page 0 ~ 127. */ + case 0x807e80 ... 0x807eff: /* Page 253. */ + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_UDMPU23, + TAS2783_SDCA_CTL_UDMPU_CLUSTER, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, TAS2783_SDCA_CTL_FU_MUTE, + TAS2783_DEVICE_CHANNEL_LEFT): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x1, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_TG23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x0a, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x14, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x15, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x16, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 3): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 4): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 5): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 6): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 7): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 8): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 9): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xa): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xb): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xc): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xd): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xe): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xf): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS25, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS25, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x04, 0): + return 1; + + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 3): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 4): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 5): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 6): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 7): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x02, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x07, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x09, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x11, 0): + return 2; + + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x06, 0): + return 4; + + default: + return 0; + } +} + +static bool tas2783_readable_register(struct device *dev, unsigned int reg) +{ + return tas2783_sdca_mbq_size(dev, reg) > 0; +} + +static bool tas2783_volatile_register(struct device *dev, u32 reg) +{ + switch (reg) { + case 0x000 ... 0x080: /* Data port 0. */ + case 0x100 ... 0x140: /* Data port 1. */ + case 0x200 ... 0x240: /* Data port 2. */ + case 0x300 ... 0x340: /* Data port 3. */ + case 0x400 ... 0x440: /* Data port 4. */ + case 0x500 ... 0x540: /* Data port 5. */ + case 0x800001: + return true; + + default: + return false; + } +} + +static const struct regmap_config tas_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .reg_defaults = tas2783_reg_default, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_default), + .max_register = 0x41008000 + TASDEV_REG_SDW(0xa1, 0x60, 0x7f), + .cache_type = REGCACHE_MAPLE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct regmap_sdw_mbq_cfg tas2783_mbq_cfg = { + .mbq_size = tas2783_sdca_mbq_size, +}; + +static s32 tas_clamp(s32 val, s32 max, u32 invert) +{ + val = clamp(val, 0, max); + if (invert) + val = max - val; + + return val; +} + +static s32 tas2783_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + s32 val, ret; + + ret = regmap_read(tas_dev->regmap, mc->reg, &val); + if (ret < 0) + return ret; + + ucontrol->value.integer.value[0] = + tas_clamp(val, mc->max, mc->invert); + return ret; +} + +static s32 tas2783_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + s32 val, ret; + + val = tas_clamp(ucontrol->value.integer.value[0], + mc->max, mc->invert); + ret = regmap_write(tas_dev->regmap, mc->reg, val); + if (ret) + dev_dbg(tas_dev->dev, "put vol %d into %x %x\n", + val, mc->reg, ret); + + return ret; +} + +static s32 tas2783_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + u8 mask = 0; + s32 ret, val = 0; + + /* Read current volume from the device. */ + ret = regmap_read(tas_dev->regmap, mc->reg, &val); + if (ret < 0) { + dev_err(tas_dev->dev, "AMP vol read failed, addr=%x err=%d\n", + mc->reg, ret); + return ret; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + ucontrol->value.integer.value[0] = + tas_clamp(val, mc->max, mc->invert); + + return 0; +} + +static s32 tas2783_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + u8 mask; + s32 val, ret; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = tas_clamp(ucontrol->value.integer.value[0], mc->max, + mc->invert); + ret = regmap_update_bits(tas_dev->regmap, mc->reg, + mask, val << mc->shift); + if (ret) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + } + + return ret; +} + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, 0, tas2783_amp_getvol, + tas2783_amp_putvol, tas2781_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, tas2783_digital_getvol, + tas2783_digital_putvol, tas2781_dvc_tlv), +}; + +static s32 tas2783_validate_calibdata(struct tas2783_prv *tas_dev, + u8 *data, u32 size) +{ + u32 ts, spk_count, size_calculated; + u32 crc_calculated, crc_read, i; + u32 *tmp_val; + struct tm tm; + + i = 0; + tmp_val = (u32 *)data; + if (tmp_val[i++] != 2783) { + dev_err(tas_dev->dev, "cal data magic number mismatch"); + return -EINVAL; + } + + spk_count = tmp_val[i++]; + if (spk_count > TAS2783_CALIB_MAX_SPK_COUNT) { + dev_err(tas_dev->dev, "cal data spk_count too large"); + return -EINVAL; + } + + ts = tmp_val[i++]; + time64_to_tm(ts, 0, &tm); + dev_dbg(tas_dev->dev, "cal data timestamp: %ld-%d-%d %d:%d:%d", + tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + + size_calculated = + (spk_count * TAS2783_CALIB_PARAMS * sizeof(u32)) + + TAS2783_CALIB_HDR_SZ + TAS2783_CALIB_CRC_SZ; + if (size_calculated > TAS2783_CALIB_DATA_SZ) { + dev_err(tas_dev->dev, "cali data sz too large"); + return -EINVAL; + } else if (size < size_calculated) { + dev_err(tas_dev->dev, "cali data size mismatch calc=%u vs %d\n", + size, size_calculated); + return -EINVAL; + } + + crc_calculated = crc32(~0, data, + size_calculated - TAS2783_CALIB_CRC_SZ) ^ ~0; + crc_read = tmp_val[(size_calculated - TAS2783_CALIB_CRC_SZ) / sizeof(u32)]; + if (crc_calculated != crc_read) { + dev_err(tas_dev->dev, + "calib data integrity check fail, 0x%08x vs 0x%08x\n", + crc_calculated, crc_read); + return -EINVAL; + } + + return 0; +} + +static void tas2783_set_calib_params_to_device(struct tas2783_prv *tas_dev, u32 *cali_data) +{ + u32 dev_count, offset, i, device_num; + u32 reg_value; + u8 buf[4]; + + dev_count = cali_data[1]; + offset = 3; + + for (device_num = 0; device_num < dev_count; device_num++) { + if (cali_data[offset] != tas_dev->sdw_peripheral->id.unique_id) { + offset += TAS2783_CALIB_PARAMS; + continue; + } + offset++; + + for (i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + reg_value = cali_data[offset + i]; + buf[0] = reg_value >> 24; + buf[1] = reg_value >> 16; + buf[2] = reg_value >> 8; + buf[3] = reg_value & 0xff; + regmap_bulk_write(tas_dev->regmap, tas2783_cali_reg[i], + buf, sizeof(u32)); + } + break; + } + + if (device_num == dev_count) + dev_err(tas_dev->dev, "device not found\n"); + else + dev_dbg(tas_dev->dev, "calib data update done\n"); +} + +static s32 tas2783_update_calibdata(struct tas2783_prv *tas_dev) +{ + efi_guid_t efi_guid = TAS2783_CALI_GUID; + u32 attr, i, *tmp_val; + unsigned long size; + s32 ret; + efi_status_t status; + static efi_char16_t efi_names[][32] = { + L"SmartAmpCalibrationData", L"CALI_DATA"}; + + tmp_val = (u32 *)tas_dev->cali_data.data; + attr = 0; + i = 0; + + /* + * In some cases, the calibration is performed in Windows, + * and data was saved in UEFI. Linux can access it. + */ + for (i = 0; i < ARRAY_SIZE(efi_names); i++) { + size = 0; + status = efi.get_variable(efi_names[i], &efi_guid, &attr, + &size, NULL); + if (size > TAS2783_CALIB_DATA_SZ) { + dev_err(tas_dev->dev, "cali data too large\n"); + break; + } + + tas_dev->cali_data.read_sz = size; + if (status == EFI_BUFFER_TOO_SMALL) { + status = efi.get_variable(efi_names[i], &efi_guid, &attr, + &tas_dev->cali_data.read_sz, + tas_dev->cali_data.data); + dev_dbg(tas_dev->dev, "cali get %lu bytes result:%ld\n", + tas_dev->cali_data.read_sz, status); + } + if (status == EFI_SUCCESS) + break; + } + + if (status != EFI_SUCCESS) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return 0; + } + + mutex_lock(&tas_dev->calib_lock); + ret = tas2783_validate_calibdata(tas_dev, tas_dev->cali_data.data, + tas_dev->cali_data.read_sz); + if (!ret) + tas2783_set_calib_params_to_device(tas_dev, tmp_val); + mutex_unlock(&tas_dev->calib_lock); + + return ret; +} + +static s32 read_header(const u8 *data, struct bin_header_t *hdr) +{ + hdr->vendor_id = get_unaligned_le16(&data[0]); + hdr->file_id = get_unaligned_le32(&data[2]); + hdr->version = get_unaligned_le16(&data[6]); + hdr->length = get_unaligned_le32(&data[8]); + return 12; +} + +static void tas2783_fw_ready(const struct firmware *fmw, void *context) +{ + struct tas2783_prv *tas_dev = + (struct tas2783_prv *)context; + const u8 *buf = NULL; + s32 offset = 0, img_sz, file_blk_size, ret; + struct bin_header_t hdr; + + if (!fmw || !fmw->data) { + /* No firmware binary, devices will work in ROM mode. */ + dev_err(tas_dev->dev, + "Failed to read %s, no side-effect on driver running\n", + tas_dev->rca_binaryname); + ret = -EINVAL; + goto out; + } + + mutex_lock(&tas_dev->pde_lock); + img_sz = fmw->size; + buf = fmw->data; + offset += FW_DL_OFFSET; + while (offset < (img_sz - FW_FL_HDR)) { + memset(&hdr, 0, sizeof(hdr)); + offset += read_header(&buf[offset], &hdr); + dev_dbg(tas_dev->dev, + "vndr=%d, file=%d, version=%d, len=%d, off=%d\n", + hdr.vendor_id, hdr.file_id, hdr.version, + hdr.length, offset); + /* size also includes the header */ + file_blk_size = hdr.length - FW_FL_HDR; + + switch (hdr.file_id) { + case 0: + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + PRAM_ADDR_START, file_blk_size, + &buf[offset]); + if (ret < 0) + dev_err(tas_dev->dev, + "PRAM update failed: %d", ret); + break; + + case 1: + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + YRAM_ADDR_START, file_blk_size, + &buf[offset]); + if (ret < 0) + dev_err(tas_dev->dev, + "YRAM update failed: %d", ret); + + break; + + default: + ret = -EINVAL; + dev_err(tas_dev->dev, "Unsupported file"); + break; + } + + if (ret == 0) + offset += file_blk_size; + else + break; + }; + mutex_unlock(&tas_dev->pde_lock); + tas2783_update_calibdata(tas_dev); + +out: + if (!ret) + tas_dev->fw_dl_success = true; + tas_dev->fw_dl_task_done = true; + wake_up(&tas_dev->fw_wait); + if (fmw) + release_firmware(fmw); +} + +static inline s32 tas_clear_latch(struct tas2783_prv *priv) +{ + return regmap_update_bits(priv->regmap, + TASDEV_REG_SDW(0, 0, 0x5c), + 0x04, 0x04); +} + +static s32 tas_fu21_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, s32 event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas2783_prv *tas_dev = snd_soc_component_get_drvdata(component); + s32 mute; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + mute = 0; + break; + + case SND_SOC_DAPM_PRE_PMD: + mute = 1; + break; + } + + return sdw_write_no_pm(tas_dev->sdw_peripheral, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 1), mute); +} + +static s32 tas_fu23_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, s32 event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas2783_prv *tas_dev = snd_soc_component_get_drvdata(component); + s32 mute; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + mute = 0; + break; + + case SND_SOC_DAPM_PRE_PMD: + mute = 1; + break; + } + + return sdw_write_no_pm(tas_dev->sdw_peripheral, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 1), mute); +} + +static const struct snd_soc_dapm_widget tas_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0), + SND_SOC_DAPM_DAC_E("FU21", NULL, SND_SOC_NOPM, 0, 0, tas_fu21_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("FU23", NULL, SND_SOC_NOPM, 0, 0, tas_fu23_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_OUTPUT("SPK"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tas_audio_map[] = { + {"FU21", NULL, "ASI"}, + {"SPK", NULL, "FU21"}, + {"FU23", NULL, "ASI"}, + {"SPK", NULL, "FU23"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static s32 tas_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, s32 direction) +{ + if (!sdw_stream) + return 0; + + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tas_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static s32 tas_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + struct sdw_slave *sdw_peripheral = tas_dev->sdw_peripheral; + s32 ret, retry = 3; + + if (!tas_dev->fw_dl_success) { + dev_err(tas_dev->dev, "error playback without fw download"); + return -EINVAL; + } + + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + if (!sdw_stream) + return -EINVAL; + + ret = tas_clear_latch(tas_dev); + if (ret) + dev_err(tas_dev->dev, + "clear latch failed, err=%d", ret); + + mutex_lock(&tas_dev->pde_lock); + /* + * Sometimes, there is error returned during power on. + * So added retry logic to ensure power on so that + * port prepare succeeds + */ + do { + ret = regmap_write(tas_dev->regmap, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POW_STATE, 0), + TAS2783_SDCA_POW_STATE_ON); + if (!ret) + break; + usleep_range(2000, 2200); + } while (retry--); + mutex_unlock(&tas_dev->pde_lock); + if (ret) + return ret; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) + dev_err(dai->dev, "Unable to configure port\n"); + + return ret; +} + +static s32 tas_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + s32 ret; + struct snd_soc_component *component = dai->component; + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + sdw_stream_remove_slave(tas_dev->sdw_peripheral, sdw_stream); + + mutex_lock(&tas_dev->pde_lock); + ret = regmap_write(tas_dev->regmap, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POW_STATE, 0), + TAS2783_SDCA_POW_STATE_OFF); + mutex_unlock(&tas_dev->pde_lock); + + return ret; +} + +static const struct snd_soc_dai_ops tas_dai_ops = { + .hw_params = tas_sdw_hw_params, + .hw_free = tas_sdw_pcm_hw_free, + .set_stream = tas_set_sdw_stream, + .shutdown = tas_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tas_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tas_dai_ops, + .symmetric_rate = 1, + }, +}; + +static s32 tas_component_probe(struct snd_soc_component *component) +{ + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + + tas_dev->component = component; + tas25xx_register_misc(tas_dev->sdw_peripheral); + + return 0; +} + +static void tas_component_remove(struct snd_soc_component *codec) +{ + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(codec); + tas25xx_deregister_misc(); + tas_dev->component = NULL; +} + +static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { + .probe = tas_component_probe, + .remove = tas_component_remove, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tas_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas_dapm_widgets), + .dapm_routes = tas_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static s32 tas_init(struct tas2783_prv *tas_dev) +{ + s32 ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tas_dai_driver, + ARRAY_SIZE(tas_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return ret; +} + +static s32 tas_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + s32 nval; + s32 i, j; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x04; /* BITMAP: 00000100 */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = false; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = false; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 200; + + return 0; +} + +static s32 tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + + if (!tas_dev->hw_init) + return 0; + + regcache_cache_only(tas_dev->regmap, true); + return 0; +} + +static s32 tas2783_sdca_dev_system_suspend(struct device *dev) +{ + return tas2783_sdca_dev_suspend(dev); +} + +static s32 tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + unsigned long t; + + if (!slave->unattach_request) + goto regmap_sync; + + t = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT)); + if (!t) { + dev_err(&slave->dev, "resume: initialization timed out\n"); + sdw_show_ping_status(slave->bus, true); + return -ETIMEDOUT; + } + + slave->unattach_request = 0; + +regmap_sync: + regcache_cache_only(tas_dev->regmap, false); + regcache_sync(tas_dev->regmap); + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_system_suspend, tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, tas2783_sdca_dev_resume, NULL) +}; + +static s32 tas_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + s32 ret; + u8 unique_id = tas_dev->sdw_peripheral->id.unique_id; + + if (tas_dev->hw_init) + return 0; + + tas_dev->fw_dl_task_done = false; + tas_dev->fw_dl_success = false; + scnprintf(tas_dev->rca_binaryname, sizeof(tas_dev->rca_binaryname), + "tas2783-%01x.bin", unique_id); + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, + GFP_KERNEL, tas_dev, tas2783_fw_ready); + if (ret) { + dev_err(tas_dev->dev, + "firmware request failed for uid=%d, ret=%d\n", + unique_id, ret); + return ret; + } + + ret = wait_event_timeout(tas_dev->fw_wait, tas_dev->fw_dl_task_done, + msecs_to_jiffies(TIMEOUT_FW_DL_MS)); + if (!ret) { + dev_err(tas_dev->dev, "fw request, wait_event timeout\n"); + ret = -EAGAIN; + } else { + ret = regmap_multi_reg_write(tas_dev->regmap, tas2783_init_seq, + ARRAY_SIZE(tas2783_init_seq)); + tas_dev->hw_init = true; + } + + return ret; +} + +static s32 tas_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(&slave->dev); + struct device *dev = &slave->dev; + + dev_dbg(dev, "Perifpheral status = %s", + status == SDW_SLAVE_UNATTACHED ? "unattached" : + status == SDW_SLAVE_ATTACHED ? "attached" : "alert"); + + tas_dev->status = status; + if (status == SDW_SLAVE_UNATTACHED) + tas_dev->hw_init = false; + + /* Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_dev->hw_init || tas_dev->status != SDW_SLAVE_ATTACHED) + return 0; + + /* updated the cache data to device */ + regcache_cache_only(tas_dev->regmap, false); + regcache_sync(tas_dev->regmap); + + /* perform I/O transfers required for Slave initialization */ + return tas_io_init(&slave->dev, slave); +} + +static const struct sdw_slave_ops tas_sdw_ops = { + .read_prop = tas_read_prop, + .update_status = tas_update_status, +}; + +static void tas_remove(struct tas2783_prv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); +} + +static s32 tas_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + struct device *dev = &peripheral->dev; + struct tas2783_prv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return dev_err_probe(dev, -ENOMEM, + "Failed devm_kzalloc"); + + tas_dev->dev = dev; + tas_dev->sdw_peripheral = peripheral; + tas_dev->hw_init = false; + mutex_init(&tas_dev->calib_lock); + mutex_init(&tas_dev->pde_lock); + + init_waitqueue_head(&tas_dev->fw_wait); + dev_set_drvdata(dev, tas_dev); + regmap = devm_regmap_init_sdw_mbq_cfg(peripheral, + &tas_regmap, + &tas2783_mbq_cfg); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + /* keep in cache until the device is fully initialized */ + regcache_cache_only(regmap, true); + tas_dev->regmap = regmap; + return tas_init(tas_dev); +} + +static s32 tas_sdw_remove(struct sdw_slave *peripheral) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(&peripheral->dev); + + pm_runtime_disable(tas_dev->dev); + tas_remove(tas_dev); + mutex_destroy(&tas_dev->calib_lock); + mutex_destroy(&tas_dev->pde_lock); + dev_set_drvdata(&peripheral->dev, NULL); + + return 0; +} + +static const struct sdw_device_id tas_sdw_id[] = { + /* chipid for the TAS2783 is 0x0000 */ + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, tas_sdw_id); + +static struct sdw_driver tas_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = pm_ptr(&tas2783_sdca_pm), + }, + .probe = tas_sdw_probe, + .remove = tas_sdw_remove, + .ops = &tas_sdw_ops, + .id_table = tas_sdw_id, +}; +module_sdw_driver(tas_sdw_driver); + +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000..a77e332de --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2025 Texas Instruments Incorporated + * https://www.ti.com + * + * The TAS2783 driver implements a flexible and configurable + * algo coefficient setting for single TAS2783 chips. + * + * Author: Niranjan H Y <niranjanhy(a)ti.com> + * Author: Baojun Xu <baojun.xu(a)ti.com> + */ +#include <linux/workqueue.h> + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* book, page, register */ +#define TASDEV_REG_SDW(book, page, reg) (((book) * 256 * 128) + \ + 0x800000 + ((page) * 128) + (reg)) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEV_REG_SDW(0x0, 0x00, 0x1A) +#define TAS2783_AMP_LEVEL TASDEV_REG_SDW(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +#define PRAM_ADDR_START TASDEV_REG_SDW(0x8c, 0x01, 0x8) +#define PRAM_ADDR_END TASDEV_REG_SDW(0x8c, 0xff, 0x7f) +#define YRAM_ADDR_START TASDEV_REG_SDW(0x00, 0x02, 0x8) +#define YRAM_ADDR_END TASDEV_REG_SDW(0x00, 0x37, 0x7f) + +/* Calibration data */ +#define TAS2783_CAL_R0 TASDEV_REG_SDW(0, 0x16, 0x4C) +#define TAS2783_CAL_INVR0 TASDEV_REG_SDW(0, 0x16, 0x5C) +#define TAS2783_CAL_R0LOW TASDEV_REG_SDW(0, 0x16, 0x64) +#define TAS2783_CAL_POWER TASDEV_REG_SDW(0, 0x15, 0x44) +#define TAS2783_CAL_TLIM TASDEV_REG_SDW(0, 0x17, 0x58) + +/* TAS2783 SDCA Control - function number */ +#define FUNC_NUM_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ + +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 +#define TAS2783_SDCA_ENT_FU26 0x03 +#define TAS2783_SDCA_ENT_XU22 0x04 +#define TAS2783_SDCA_ENT_CS24 0x05 +#define TAS2783_SDCA_ENT_CS21 0x06 +#define TAS2783_SDCA_ENT_CS25 0x07 +#define TAS2783_SDCA_ENT_CS26 0x08 +#define TAS2783_SDCA_ENT_CS28 0x09 +#define TAS2783_SDCA_ENT_PDE23 0x0C +#define TAS2783_SDCA_ENT_UDMPU23 0x0E +#define TAS2783_SDCA_ENT_SAPU29 0x0F +#define TAS2783_SDCA_ENT_PPU21 0x10 +#define TAS2783_SDCA_ENT_PPU26 0x11 +#define TAS2783_SDCA_ENT_TG23 0x12 +#define TAS2783_SDCA_ENT_IT21 0x13 +#define TAS2783_SDCA_ENT_IT29 0x14 +#define TAS2783_SDCA_ENT_IT26 0x15 +#define TAS2783_SDCA_ENT_IT28 0x16 +#define TAS2783_SDCA_ENT_OT24 0x17 +#define TAS2783_SDCA_ENT_OT23 0x18 +#define TAS2783_SDCA_ENT_OT25 0x19 +#define TAS2783_SDCA_ENT_OT28 0x1A +#define TAS2783_SDCA_ENT_MU26 0x1b +#define TAS2783_SDCA_ENT_OT127 0x1E +#define TAS2783_SDCA_ENT_FU127 0x1F +#define TAS2783_SDCA_ENT_CS127 0x20 +#define TAS2783_SDCA_ENT_MFPU21 0x22 +#define TAS2783_SDCA_ENT_MFPU26 0x23 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POW_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 + +#define TAS2783_SDCA_POW_STATE_ON 0 +#define TAS2783_SDCA_POW_STATE_OFF 3 + +/* calibration data */ +#define TAS2783_CALIB_PARAMS 6 /* 5 + 1 unique id */ +#define TAS2783_CALIB_MAX_SPK_COUNT 8 +#define TAS2783_CALIB_HDR_SZ 12 +#define TAS2783_CALIB_CRC_SZ 4 +#define TAS2783_CALIB_DATA_SZ ((TAS2783_CALIB_HDR_SZ) + TAS2783_CALIB_CRC_SZ + \ + ((TAS2783_CALIB_PARAMS) * 4 * (TAS2783_CALIB_MAX_SPK_COUNT))) + +#if IS_ENABLED(CONFIG_SND_SOC_TAS2783_UTIL) +int32_t tas25xx_register_misc(struct sdw_slave *peripheral); +int32_t tas25xx_deregister_misc(void); +#endif + +#endif /*__TAS2783_H__ */ -- 2.45.2

2 4

[PATCH v2 1/4] ASoc: tas2783A: Add soundwire based codec driver
by Niranjan H Y 10 Sep '25

10 Sep '25

TAS2783 is mono digital input class-D Smart Amplifier based on MIPI Alliance Soundwire interface. The driver supports loading the algorithm coefficients for one or more tas2783 chips. Signed-off-by: Niranjan H Y <niranjan.hy(a)ti.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- v2: - append Volume to amp gain mixer control - remove unwanted debug log --- sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 1417 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 107 +++ 4 files changed, 1540 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index b8d58d2fe326..1f012e6a6c9e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -266,6 +266,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783_SDW imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -2074,6 +2075,19 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783_SDW + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + select SOUNDWIRE + select REGMAP + select REGMAP_SOUNDWIRE + select EFI + select CRC32 + help + Enable support for Texas Instruments TAS2783A Digital input + mono Class-D and DSP-inside audio power amplifiers. TAS2783 + driver implements a flexible and configurable algorithm + cofficient setting, for one, two or multiple TAS2783 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a476d6c45451..1920fa17be8d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -316,6 +316,7 @@ snd-soc-tas2781-comlib-y := tas2781-comlib.o snd-soc-tas2781-comlib-i2c-y := tas2781-comlib-i2c.o snd-soc-tas2781-fmwlib-y := tas2781-fmwlib.o snd-soc-tas2781-i2c-y := tas2781-i2c.o +snd-soc-tas2783-sdw-y := tas2783-sdw.o snd-soc-tfa9879-y := tfa9879.o snd-soc-tfa989x-y := tfa989x.o snd-soc-tlv320adc3xxx-y := tlv320adc3xxx.o @@ -732,6 +733,7 @@ obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB_I2C) += snd-soc-tas2781-comlib-i2c.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783_SDW) += snd-soc-tas2783-sdw.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..b5abbb1ddee4 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,1417 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2783 driver implements a flexible and configurable +// algo coefficient setting for single TAS2783 chips. +// +// Author: Niranjan H Y <niranjanhy(a)ti.com> +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> + +#include <linux/unaligned.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <sound/pcm_params.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/wait.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2783.h" + +#define TIMEOUT_FW_DL_MS (3000) +#define FW_DL_OFFSET 36 +#define FW_FL_HDR 12 +#define TAS2783_PROBE_TIMEOUT 5000 +#define TAS2783_CALI_GUID EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, \ + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92) + +#if !IS_ENABLED(CONFIG_SND_SOC_TAS2783_UTIL) +static void tas25xx_register_misc(struct sdw_slave *peripheral) {} +static void tas25xx_deregister_misc(void) {} +#endif + +static const u32 tas2783_cali_reg[] = { + TAS2783_CAL_R0, + TAS2783_CAL_INVR0, + TAS2783_CAL_R0LOW, + TAS2783_CAL_POWER, + TAS2783_CAL_TLIM, +}; + +struct bin_header_t { + u16 vendor_id; + u16 version; + u32 file_id; + u32 length; +}; + +struct calibration_data { + u32 is_valid; + unsigned long read_sz; + u8 data[TAS2783_CALIB_DATA_SZ]; +}; + +struct tas2783_prv { + struct snd_soc_component *component; + struct calibration_data cali_data; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + /* calibration */ + struct mutex calib_lock; + /* pde and firmware download */ + struct mutex pde_lock; + struct regmap *regmap; + struct device *dev; + struct class *class; + struct attribute_group *cal_attr_groups; + struct tm tm; + u8 rca_binaryname[64]; + u8 dev_name[32]; + bool hw_init; + /* wq for firmware download */ + wait_queue_head_t fw_wait; + bool fw_dl_task_done; + bool fw_dl_success; +}; + +static const struct reg_default tas2783_reg_default[] = { + {TAS2783_AMP_LEVEL, 0x28}, + {TASDEV_REG_SDW(0, 0, 0x03), 0x28}, + {TASDEV_REG_SDW(0, 0, 0x04), 0x21}, + {TASDEV_REG_SDW(0, 0, 0x05), 0x41}, + {TASDEV_REG_SDW(0, 0, 0x06), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x07), 0x20}, + {TASDEV_REG_SDW(0, 0, 0x08), 0x09}, + {TASDEV_REG_SDW(0, 0, 0x09), 0x02}, + {TASDEV_REG_SDW(0, 0, 0x0a), 0x0a}, + {TASDEV_REG_SDW(0, 0, 0x0c), 0x10}, + {TASDEV_REG_SDW(0, 0, 0x0d), 0x13}, + {TASDEV_REG_SDW(0, 0, 0x0e), 0xc2}, + {TASDEV_REG_SDW(0, 0, 0x0f), 0x40}, + {TASDEV_REG_SDW(0, 0, 0x10), 0x04}, + {TASDEV_REG_SDW(0, 0, 0x13), 0x13}, + {TASDEV_REG_SDW(0, 0, 0x14), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x15), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x16), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x17), 0x80}, + {TAS2783_DVC_LVL, 0x00}, + {TASDEV_REG_SDW(0, 0, 0x1b), 0x61}, + {TASDEV_REG_SDW(0, 0, 0x1c), 0x36}, + {TASDEV_REG_SDW(0, 0, 0x1d), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x1f), 0x01}, + {TASDEV_REG_SDW(0, 0, 0x20), 0x2e}, + {TASDEV_REG_SDW(0, 0, 0x21), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x34), 0x06}, + {TASDEV_REG_SDW(0, 0, 0x35), 0xbd}, + {TASDEV_REG_SDW(0, 0, 0x36), 0xad}, + {TASDEV_REG_SDW(0, 0, 0x37), 0xa8}, + {TASDEV_REG_SDW(0, 0, 0x38), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x3b), 0xfc}, + {TASDEV_REG_SDW(0, 0, 0x3d), 0xdd}, + {TASDEV_REG_SDW(0, 0, 0x40), 0xf6}, + {TASDEV_REG_SDW(0, 0, 0x41), 0x14}, + {TASDEV_REG_SDW(0, 0, 0x5c), 0x19}, + {TASDEV_REG_SDW(0, 0, 0x5d), 0x80}, + {TASDEV_REG_SDW(0, 0, 0x63), 0x48}, + {TASDEV_REG_SDW(0, 0, 0x65), 0x08}, + {TASDEV_REG_SDW(0, 0, 0x66), 0xb2}, + {TASDEV_REG_SDW(0, 0, 0x67), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6a), 0x12}, + {TASDEV_REG_SDW(0, 0, 0x6b), 0xfb}, + {TASDEV_REG_SDW(0, 0, 0x6c), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6d), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x6e), 0x1a}, + {TASDEV_REG_SDW(0, 0, 0x6f), 0x00}, + {TASDEV_REG_SDW(0, 0, 0x70), 0x96}, + {TASDEV_REG_SDW(0, 0, 0x71), 0x02}, + {TASDEV_REG_SDW(0, 0, 0x73), 0x08}, + {TASDEV_REG_SDW(0, 0, 0x75), 0xe0}, + {TASDEV_REG_SDW(0, 0, 0x7a), 0x60}, + {TASDEV_REG_SDW(0, 0, 0x60), 0x21}, + {TASDEV_REG_SDW(0, 1, 0x02), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x17), 0xc0}, + {TASDEV_REG_SDW(0, 1, 0x19), 0x60}, + {TASDEV_REG_SDW(0, 1, 0x35), 0x75}, + {TASDEV_REG_SDW(0, 1, 0x3d), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x3e), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x3f), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x40), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x41), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x42), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x43), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x44), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x45), 0x00}, + {TASDEV_REG_SDW(0, 1, 0x47), 0xab}, + {TASDEV_REG_SDW(0, 0xfd, 0x0d), 0x0d}, + {TASDEV_REG_SDW(0, 0xfd, 0x39), 0x00}, + {TASDEV_REG_SDW(0, 0xfd, 0x3e), 0x00}, + {TASDEV_REG_SDW(0, 0xfd, 0x45), 0x00}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x02, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x02, 1), 0x9c00}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 1), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 2), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x05, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x05, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 3), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 4), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 5), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 6), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 7), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x04, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 1), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 2), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 3), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 4), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 5), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 6), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 7), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 8), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 9), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xa), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xb), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xc), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xd), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xe), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xf), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x1, 0), 0x3}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x10, 0), 0x3}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x05, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x10, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x11, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_TG23, 0x10, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x01, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x06, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x07, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x08, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x09, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x0a, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x10, 0), 0x1}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x12, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x13, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x14, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x15, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x16, 0), 0x0}, + {SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_UDMPU23, 0x10, 0), 0x0}, +}; + +static const struct reg_sequence tas2783_init_seq[] = { + REG_SEQ0(SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0x00), 0x04), + REG_SEQ0(0x00800418, 0x00), + REG_SEQ0(0x00800419, 0x00), + REG_SEQ0(0x0080041a, 0x00), + REG_SEQ0(0x0080041b, 0x00), + REG_SEQ0(0x00800428, 0x40), + REG_SEQ0(0x00800429, 0x00), + REG_SEQ0(0x0080042a, 0x00), + REG_SEQ0(0x0080042b, 0x00), + REG_SEQ0(SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x1, 0x00), 0x00), + REG_SEQ0(0x0080005c, 0xD9), + REG_SEQ0(0x00800082, 0x20), + REG_SEQ0(0x008000a1, 0x00), + REG_SEQ0(0x00800097, 0xc8), + REG_SEQ0(0x00800099, 0x20), + REG_SEQ0(0x008000c7, 0xaa), + REG_SEQ0(0x008000b5, 0x74), + REG_SEQ0(0x00800082, 0x20), + REG_SEQ0(0x00807e8d, 0x0d), + REG_SEQ0(0x00807eb9, 0x53), + REG_SEQ0(0x00807ebe, 0x42), + REG_SEQ0(0x00807ec5, 0x37), + REG_SEQ0(0x00800066, 0x92), + REG_SEQ0(0x00800003, 0x28), + REG_SEQ0(0x00800004, 0x21), + REG_SEQ0(0x00800005, 0x41), + REG_SEQ0(0x00800006, 0x00), + REG_SEQ0(0x00800007, 0x20), + REG_SEQ0(0x0080000c, 0x10), + REG_SEQ0(0x00800013, 0x08), + REG_SEQ0(0x00800015, 0x00), + REG_SEQ0(0x00800017, 0x80), + REG_SEQ0(0x0080001a, 0x00), + REG_SEQ0(0x0080001b, 0x22), + REG_SEQ0(0x0080001c, 0x36), + REG_SEQ0(0x0080001d, 0x01), + REG_SEQ0(0x0080001f, 0x00), + REG_SEQ0(0x00800020, 0x2e), + REG_SEQ0(0x00800034, 0x06), + REG_SEQ0(0x00800035, 0xb9), + REG_SEQ0(0x00800036, 0xad), + REG_SEQ0(0x00800037, 0xa8), + REG_SEQ0(0x00800038, 0x00), + REG_SEQ0(0x0080003b, 0xfc), + REG_SEQ0(0x0080003d, 0xdd), + REG_SEQ0(0x00800040, 0xf6), + REG_SEQ0(0x00800041, 0x14), + REG_SEQ0(0x0080005c, 0x19), + REG_SEQ0(0x0080005d, 0x80), + REG_SEQ0(0x00800063, 0x48), + REG_SEQ0(0x00800065, 0x08), + REG_SEQ0(0x00800067, 0x00), + REG_SEQ0(0x0080006a, 0x12), + REG_SEQ0(0x0080006b, 0x7b), + REG_SEQ0(0x0080006c, 0x00), + REG_SEQ0(0x0080006d, 0x00), + REG_SEQ0(0x0080006e, 0x1a), + REG_SEQ0(0x0080006f, 0x00), + REG_SEQ0(0x00800070, 0x96), + REG_SEQ0(0x00800071, 0x02), + REG_SEQ0(0x00800073, 0x08), + REG_SEQ0(0x00800075, 0xe0), + REG_SEQ0(0x0080007a, 0x60), + REG_SEQ0(0x008000bd, 0x00), + REG_SEQ0(0x008000be, 0x00), + REG_SEQ0(0x008000bf, 0x00), + REG_SEQ0(0x008000c0, 0x00), + REG_SEQ0(0x008000c1, 0x00), + REG_SEQ0(0x008000c2, 0x00), + REG_SEQ0(0x008000c3, 0x00), + REG_SEQ0(0x008000c4, 0x00), + REG_SEQ0(0x008000c5, 0x00), + REG_SEQ0(0x00800008, 0x49), + REG_SEQ0(0x00800009, 0x02), + REG_SEQ0(0x0080000a, 0x1a), + REG_SEQ0(0x0080000d, 0x93), + REG_SEQ0(0x0080000e, 0x82), + REG_SEQ0(0x0080000f, 0x42), + REG_SEQ0(0x00800010, 0x84), + REG_SEQ0(0x00800014, 0x0a), + REG_SEQ0(0x00800016, 0x00), + REG_SEQ0(0x00800060, 0x21), +}; + +static int tas2783_sdca_mbq_size(struct device *dev, u32 reg) +{ + switch (reg) { + case 0x000 ... 0x080: /* Data port 0. */ + case 0x100 ... 0x140: /* Data port 1. */ + case 0x200 ... 0x240: /* Data port 2. */ + case 0x300 ... 0x340: /* Data port 3. */ + case 0x400 ... 0x440: /* Data port 4. */ + case 0x500 ... 0x540: /* Data port 5. */ + case 0x800000 ... 0x803fff: /* Page 0 ~ 127. */ + case 0x807e80 ... 0x807eff: /* Page 253. */ + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_UDMPU23, + TAS2783_SDCA_CTL_UDMPU_CLUSTER, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, TAS2783_SDCA_CTL_FU_MUTE, + TAS2783_DEVICE_CHANNEL_LEFT): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x1, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_TG23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x0a, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x14, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x15, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x16, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 3): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 4): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 5): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 6): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 7): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 8): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 9): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xa): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xb): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xc): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xd): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xe): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x12, 0xf): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS24, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS25, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS25, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS127, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x02, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_CS28, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x04, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x04, 0): + return 1; + + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x11, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 3): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 4): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 5): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 6): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x01, 7): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, 0x02, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 2): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x0b, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x0b, 1): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x07, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x09, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x11, 0): + return 2; + + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT21, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT26, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT28, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_IT29, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT23, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT24, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT25, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT28, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_OT127, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MU26, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU127, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU26, 0x10, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x12, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_XU22, 0x13, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU21, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_MFPU26, 0x08, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_SAPU29, 0x05, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU21, 0x06, 0): + case SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PPU26, 0x06, 0): + return 4; + + default: + return 0; + } +} + +static bool tas2783_readable_register(struct device *dev, unsigned int reg) +{ + return tas2783_sdca_mbq_size(dev, reg) > 0; +} + +static bool tas2783_volatile_register(struct device *dev, u32 reg) +{ + switch (reg) { + case 0x000 ... 0x080: /* Data port 0. */ + case 0x100 ... 0x140: /* Data port 1. */ + case 0x200 ... 0x240: /* Data port 2. */ + case 0x300 ... 0x340: /* Data port 3. */ + case 0x400 ... 0x440: /* Data port 4. */ + case 0x500 ... 0x540: /* Data port 5. */ + case 0x800001: + return true; + + default: + return false; + } +} + +static const struct regmap_config tas_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .reg_defaults = tas2783_reg_default, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_default), + .max_register = 0x41008000 + TASDEV_REG_SDW(0xa1, 0x60, 0x7f), + .cache_type = REGCACHE_MAPLE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct regmap_sdw_mbq_cfg tas2783_mbq_cfg = { + .mbq_size = tas2783_sdca_mbq_size, +}; + +static s32 tas_clamp(s32 val, s32 max, u32 invert) +{ + val = clamp(val, 0, max); + if (invert) + val = max - val; + + return val; +} + +static s32 tas2783_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + s32 val, ret; + + ret = regmap_read(tas_dev->regmap, mc->reg, &val); + if (ret < 0) + return ret; + + ucontrol->value.integer.value[0] = + tas_clamp(val, mc->max, mc->invert); + return ret; +} + +static s32 tas2783_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + s32 val, ret; + + val = tas_clamp(ucontrol->value.integer.value[0], + mc->max, mc->invert); + ret = regmap_write(tas_dev->regmap, mc->reg, val); + if (ret) + dev_dbg(tas_dev->dev, "put vol %d into %x %x\n", + val, mc->reg, ret); + + return ret; +} + +static s32 tas2783_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + u8 mask = 0; + s32 ret, val = 0; + + /* Read current volume from the device. */ + ret = regmap_read(tas_dev->regmap, mc->reg, &val); + if (ret < 0) { + dev_err(tas_dev->dev, "AMP vol read failed, addr=%x err=%d\n", + mc->reg, ret); + return ret; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + ucontrol->value.integer.value[0] = + tas_clamp(val, mc->max, mc->invert); + + return 0; +} + +static s32 tas2783_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + u8 mask; + s32 val, ret; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = tas_clamp(ucontrol->value.integer.value[0], mc->max, + mc->invert); + ret = regmap_update_bits(tas_dev->regmap, mc->reg, + mask, val << mc->shift); + if (ret) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + } + + return ret; +} + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, 0, tas2783_amp_getvol, + tas2783_amp_putvol, tas2781_amp_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Speaker Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, tas2783_digital_getvol, + tas2783_digital_putvol, tas2781_dvc_tlv), +}; + +static s32 tas2783_validate_calibdata(struct tas2783_prv *tas_dev, + u8 *data, u32 size) +{ + u32 ts, spk_count, size_calculated; + u32 crc_calculated, crc_read, i; + u32 *tmp_val; + struct tm tm; + + i = 0; + tmp_val = (u32 *)data; + if (tmp_val[i++] != 2783) { + dev_err(tas_dev->dev, "cal data magic number mismatch"); + return -EINVAL; + } + + spk_count = tmp_val[i++]; + if (spk_count > TAS2783_CALIB_MAX_SPK_COUNT) { + dev_err(tas_dev->dev, "cal data spk_count too large"); + return -EINVAL; + } + + ts = tmp_val[i++]; + time64_to_tm(ts, 0, &tm); + dev_dbg(tas_dev->dev, "cal data timestamp: %ld-%d-%d %d:%d:%d", + tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + + size_calculated = + (spk_count * TAS2783_CALIB_PARAMS * sizeof(u32)) + + TAS2783_CALIB_HDR_SZ + TAS2783_CALIB_CRC_SZ; + if (size_calculated > TAS2783_CALIB_DATA_SZ) { + dev_err(tas_dev->dev, "cali data sz too large"); + return -EINVAL; + } else if (size < size_calculated) { + dev_err(tas_dev->dev, "cali data size mismatch calc=%u vs %d\n", + size, size_calculated); + return -EINVAL; + } + + crc_calculated = crc32(~0, data, + size_calculated - TAS2783_CALIB_CRC_SZ) ^ ~0; + crc_read = tmp_val[(size_calculated - TAS2783_CALIB_CRC_SZ) / sizeof(u32)]; + if (crc_calculated != crc_read) { + dev_err(tas_dev->dev, + "calib data integrity check fail, 0x%08x vs 0x%08x\n", + crc_calculated, crc_read); + return -EINVAL; + } + + return 0; +} + +static void tas2783_set_calib_params_to_device(struct tas2783_prv *tas_dev, u32 *cali_data) +{ + u32 dev_count, offset, i, device_num; + u32 reg_value; + u8 buf[4]; + + dev_count = cali_data[1]; + offset = 3; + + for (device_num = 0; device_num < dev_count; device_num++) { + if (cali_data[offset] != tas_dev->sdw_peripheral->id.unique_id) { + offset += TAS2783_CALIB_PARAMS; + continue; + } + offset++; + + for (i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + reg_value = cali_data[offset + i]; + buf[0] = reg_value >> 24; + buf[1] = reg_value >> 16; + buf[2] = reg_value >> 8; + buf[3] = reg_value & 0xff; + regmap_bulk_write(tas_dev->regmap, tas2783_cali_reg[i], + buf, sizeof(u32)); + } + break; + } + + if (device_num == dev_count) + dev_err(tas_dev->dev, "device not found\n"); + else + dev_dbg(tas_dev->dev, "calib data update done\n"); +} + +static s32 tas2783_update_calibdata(struct tas2783_prv *tas_dev) +{ + efi_guid_t efi_guid = TAS2783_CALI_GUID; + u32 attr, i, *tmp_val; + size_t size; + s32 ret; + efi_status_t status; + static efi_char16_t efi_names[][32] = { + L"SmartAmpCalibrationData", L"CALI_DATA"}; + + tmp_val = (u32 *)tas_dev->cali_data.data; + attr = 0; + i = 0; + + /* + * In some cases, the calibration is performed in Windows, + * and data was saved in UEFI. Linux can access it. + */ + for (i = 0; i < ARRAY_SIZE(efi_names); i++) { + size = 0; + status = efi.get_variable(efi_names[i], &efi_guid, &attr, + &size, NULL); + if (size > TAS2783_CALIB_DATA_SZ) { + dev_err(tas_dev->dev, "cali data too large\n"); + break; + } + + tas_dev->cali_data.read_sz = size; + if (status == EFI_BUFFER_TOO_SMALL) { + status = efi.get_variable(efi_names[i], &efi_guid, &attr, + &tas_dev->cali_data.read_sz, + tas_dev->cali_data.data); + dev_dbg(tas_dev->dev, "cali get %lu bytes result:%ld\n", + tas_dev->cali_data.read_sz, status); + } + if (status == EFI_SUCCESS) + break; + } + + if (status != EFI_SUCCESS) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return 0; + } + + mutex_lock(&tas_dev->calib_lock); + ret = tas2783_validate_calibdata(tas_dev, tas_dev->cali_data.data, + tas_dev->cali_data.read_sz); + if (!ret) + tas2783_set_calib_params_to_device(tas_dev, tmp_val); + mutex_unlock(&tas_dev->calib_lock); + + return ret; +} + +static s32 read_header(const u8 *data, struct bin_header_t *hdr) +{ + hdr->vendor_id = get_unaligned_le16(&data[0]); + hdr->file_id = get_unaligned_le32(&data[2]); + hdr->version = get_unaligned_le16(&data[6]); + hdr->length = get_unaligned_le32(&data[8]); + return 12; +} + +static void tas2783_fw_ready(const struct firmware *fmw, void *context) +{ + struct tas2783_prv *tas_dev = + (struct tas2783_prv *)context; + const u8 *buf = NULL; + s32 offset = 0, img_sz, file_blk_size, ret; + struct bin_header_t hdr; + + if (!fmw || !fmw->data) { + /* No firmware binary, devices will work in ROM mode. */ + dev_err(tas_dev->dev, + "Failed to read %s, no side-effect on driver running\n", + tas_dev->rca_binaryname); + ret = -EINVAL; + goto out; + } + + mutex_lock(&tas_dev->pde_lock); + img_sz = fmw->size; + buf = fmw->data; + offset += FW_DL_OFFSET; + while (offset < (img_sz - FW_FL_HDR)) { + memset(&hdr, 0, sizeof(hdr)); + offset += read_header(&buf[offset], &hdr); + dev_dbg(tas_dev->dev, + "vndr=%d, file=%d, version=%d, len=%d, off=%d\n", + hdr.vendor_id, hdr.file_id, hdr.version, + hdr.length, offset); + /* size also includes the header */ + file_blk_size = hdr.length - FW_FL_HDR; + + switch (hdr.file_id) { + case 0: + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + PRAM_ADDR_START, file_blk_size, + &buf[offset]); + if (ret < 0) + dev_err(tas_dev->dev, + "PRAM update failed: %d", ret); + break; + + case 1: + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + YRAM_ADDR_START, file_blk_size, + &buf[offset]); + if (ret < 0) + dev_err(tas_dev->dev, + "YRAM update failed: %d", ret); + + break; + + default: + ret = -EINVAL; + dev_err(tas_dev->dev, "Unsupported file"); + break; + } + + if (ret == 0) + offset += file_blk_size; + else + break; + }; + mutex_unlock(&tas_dev->pde_lock); + tas2783_update_calibdata(tas_dev); + +out: + if (!ret) + tas_dev->fw_dl_success = true; + tas_dev->fw_dl_task_done = true; + wake_up(&tas_dev->fw_wait); + if (fmw) + release_firmware(fmw); +} + +static inline s32 tas_clear_latch(struct tas2783_prv *priv) +{ + return regmap_update_bits(priv->regmap, + TASDEV_REG_SDW(0, 0, 0x5c), + 0x04, 0x04); +} + +static s32 tas_fu21_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, s32 event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas2783_prv *tas_dev = snd_soc_component_get_drvdata(component); + s32 mute; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + mute = 0; + break; + + case SND_SOC_DAPM_PRE_PMD: + mute = 1; + break; + } + + return sdw_write_no_pm(tas_dev->sdw_peripheral, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 1), mute); +} + +static s32 tas_fu23_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, s32 event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct tas2783_prv *tas_dev = snd_soc_component_get_drvdata(component); + s32 mute; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + mute = 0; + break; + + case SND_SOC_DAPM_PRE_PMD: + mute = 1; + break; + } + + return sdw_write_no_pm(tas_dev->sdw_peripheral, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 1), mute); +} + +static const struct snd_soc_dapm_widget tas_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0), + SND_SOC_DAPM_DAC_E("FU21", NULL, SND_SOC_NOPM, 0, 0, tas_fu21_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("FU23", NULL, SND_SOC_NOPM, 0, 0, tas_fu23_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_OUTPUT("SPK"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tas_audio_map[] = { + {"FU21", NULL, "ASI"}, + {"SPK", NULL, "FU21"}, + {"FU23", NULL, "ASI"}, + {"SPK", NULL, "FU23"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static s32 tas_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, s32 direction) +{ + if (!sdw_stream) + return 0; + + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tas_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static s32 tas_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + struct sdw_slave *sdw_peripheral = tas_dev->sdw_peripheral; + s32 ret, retry = 3; + + if (!tas_dev->fw_dl_success) { + dev_err(tas_dev->dev, "error playback without fw download"); + return -EINVAL; + } + + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + if (!sdw_stream) + return -EINVAL; + + ret = tas_clear_latch(tas_dev); + if (ret) + dev_err(tas_dev->dev, + "clear latch failed, err=%d", ret); + + mutex_lock(&tas_dev->pde_lock); + /* + * Sometimes, there is error returned during power on. + * So added retry logic to ensure power on so that + * port prepare succeeds + */ + do { + ret = regmap_write(tas_dev->regmap, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POW_STATE, 0), + TAS2783_SDCA_POW_STATE_ON); + if (!ret) + break; + usleep_range(2000, 2200); + } while (retry--); + mutex_unlock(&tas_dev->pde_lock); + if (ret) + return ret; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) + dev_err(dai->dev, "Unable to configure port\n"); + + return ret; +} + +static s32 tas_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + s32 ret; + struct snd_soc_component *component = dai->component; + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + sdw_stream_remove_slave(tas_dev->sdw_peripheral, sdw_stream); + + mutex_lock(&tas_dev->pde_lock); + ret = regmap_write(tas_dev->regmap, + SDW_SDCA_CTL(1, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POW_STATE, 0), + TAS2783_SDCA_POW_STATE_OFF); + mutex_unlock(&tas_dev->pde_lock); + + return ret; +} + +static const struct snd_soc_dai_ops tas_dai_ops = { + .hw_params = tas_sdw_hw_params, + .hw_free = tas_sdw_pcm_hw_free, + .set_stream = tas_set_sdw_stream, + .shutdown = tas_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tas_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tas_dai_ops, + .symmetric_rate = 1, + }, +}; + +static s32 tas_component_probe(struct snd_soc_component *component) +{ + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(component); + + tas_dev->component = component; + tas25xx_register_misc(tas_dev->sdw_peripheral); + + return 0; +} + +static void tas_component_remove(struct snd_soc_component *codec) +{ + struct tas2783_prv *tas_dev = + snd_soc_component_get_drvdata(codec); + tas25xx_deregister_misc(); + tas_dev->component = NULL; +} + +static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { + .probe = tas_component_probe, + .remove = tas_component_remove, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tas_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas_dapm_widgets), + .dapm_routes = tas_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static s32 tas_init(struct tas2783_prv *tas_dev) +{ + s32 ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tas_dai_driver, + ARRAY_SIZE(tas_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return ret; +} + +static s32 tas_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + s32 nval; + s32 i, j; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x04; /* BITMAP: 00000100 */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = false; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = false; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 200; + + return 0; +} + +static s32 tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + + if (!tas_dev->hw_init) + return 0; + + regcache_cache_only(tas_dev->regmap, true); + return 0; +} + +static s32 tas2783_sdca_dev_system_suspend(struct device *dev) +{ + return tas2783_sdca_dev_suspend(dev); +} + +static s32 tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + unsigned long t; + + if (!slave->unattach_request) + goto regmap_sync; + + t = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT)); + if (!t) { + dev_err(&slave->dev, "resume: initialization timed out\n"); + sdw_show_ping_status(slave->bus, true); + return -ETIMEDOUT; + } + + slave->unattach_request = 0; + +regmap_sync: + regcache_cache_only(tas_dev->regmap, false); + regcache_sync(tas_dev->regmap); + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_system_suspend, tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, tas2783_sdca_dev_resume, NULL) +}; + +static s32 tas_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(dev); + s32 ret; + u8 unique_id = tas_dev->sdw_peripheral->id.unique_id; + + if (tas_dev->hw_init) + return 0; + + tas_dev->fw_dl_task_done = false; + tas_dev->fw_dl_success = false; + scnprintf(tas_dev->rca_binaryname, sizeof(tas_dev->rca_binaryname), + "tas2783-%01x.bin", unique_id); + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, + GFP_KERNEL, tas_dev, tas2783_fw_ready); + if (ret) { + dev_err(tas_dev->dev, + "firmware request failed for uid=%d, ret=%d\n", + unique_id, ret); + return ret; + } + + ret = wait_event_timeout(tas_dev->fw_wait, tas_dev->fw_dl_task_done, + msecs_to_jiffies(TIMEOUT_FW_DL_MS)); + if (!ret) { + dev_err(tas_dev->dev, "fw request, wait_event timeout\n"); + ret = -EAGAIN; + } else { + ret = regmap_multi_reg_write(tas_dev->regmap, tas2783_init_seq, + ARRAY_SIZE(tas2783_init_seq)); + tas_dev->hw_init = true; + } + + return ret; +} + +static s32 tas_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(&slave->dev); + struct device *dev = &slave->dev; + + dev_dbg(dev, "Perifpheral status = %s", + status == SDW_SLAVE_UNATTACHED ? "unattached" : + status == SDW_SLAVE_ATTACHED ? "attached" : "alert"); + + tas_dev->status = status; + if (status == SDW_SLAVE_UNATTACHED) + tas_dev->hw_init = false; + + /* Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_dev->hw_init || tas_dev->status != SDW_SLAVE_ATTACHED) + return 0; + + /* updated the cache data to device */ + regcache_cache_only(tas_dev->regmap, false); + regcache_sync(tas_dev->regmap); + + /* perform I/O transfers required for Slave initialization */ + return tas_io_init(&slave->dev, slave); +} + +static const struct sdw_slave_ops tas_sdw_ops = { + .read_prop = tas_read_prop, + .update_status = tas_update_status, +}; + +static void tas_remove(struct tas2783_prv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); +} + +static s32 tas_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + struct device *dev = &peripheral->dev; + struct tas2783_prv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return dev_err_probe(dev, -ENOMEM, + "Failed devm_kzalloc"); + + tas_dev->dev = dev; + tas_dev->sdw_peripheral = peripheral; + tas_dev->hw_init = false; + mutex_init(&tas_dev->calib_lock); + mutex_init(&tas_dev->pde_lock); + + init_waitqueue_head(&tas_dev->fw_wait); + dev_set_drvdata(dev, tas_dev); + regmap = devm_regmap_init_sdw_mbq_cfg(peripheral, + &tas_regmap, + &tas2783_mbq_cfg); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + /* keep in cache until the device is fully initialized */ + regcache_cache_only(regmap, true); + tas_dev->regmap = regmap; + return tas_init(tas_dev); +} + +static s32 tas_sdw_remove(struct sdw_slave *peripheral) +{ + struct tas2783_prv *tas_dev = dev_get_drvdata(&peripheral->dev); + + pm_runtime_disable(tas_dev->dev); + tas_remove(tas_dev); + mutex_destroy(&tas_dev->calib_lock); + mutex_destroy(&tas_dev->pde_lock); + dev_set_drvdata(&peripheral->dev, NULL); + + return 0; +} + +static const struct sdw_device_id tas_sdw_id[] = { + /* chipid for the TAS2783 is 0x0000 */ + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, tas_sdw_id); + +static struct sdw_driver tas_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = pm_ptr(&tas2783_sdca_pm), + }, + .probe = tas_sdw_probe, + .remove = tas_sdw_remove, + .ops = &tas_sdw_ops, + .id_table = tas_sdw_id, +}; +module_sdw_driver(tas_sdw_driver); + +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..a77e332dee3a --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2025 Texas Instruments Incorporated + * https://www.ti.com + * + * The TAS2783 driver implements a flexible and configurable + * algo coefficient setting for single TAS2783 chips. + * + * Author: Niranjan H Y <niranjanhy(a)ti.com> + * Author: Baojun Xu <baojun.xu(a)ti.com> + */ +#include <linux/workqueue.h> + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* book, page, register */ +#define TASDEV_REG_SDW(book, page, reg) (((book) * 256 * 128) + \ + 0x800000 + ((page) * 128) + (reg)) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEV_REG_SDW(0x0, 0x00, 0x1A) +#define TAS2783_AMP_LEVEL TASDEV_REG_SDW(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +#define PRAM_ADDR_START TASDEV_REG_SDW(0x8c, 0x01, 0x8) +#define PRAM_ADDR_END TASDEV_REG_SDW(0x8c, 0xff, 0x7f) +#define YRAM_ADDR_START TASDEV_REG_SDW(0x00, 0x02, 0x8) +#define YRAM_ADDR_END TASDEV_REG_SDW(0x00, 0x37, 0x7f) + +/* Calibration data */ +#define TAS2783_CAL_R0 TASDEV_REG_SDW(0, 0x16, 0x4C) +#define TAS2783_CAL_INVR0 TASDEV_REG_SDW(0, 0x16, 0x5C) +#define TAS2783_CAL_R0LOW TASDEV_REG_SDW(0, 0x16, 0x64) +#define TAS2783_CAL_POWER TASDEV_REG_SDW(0, 0x15, 0x44) +#define TAS2783_CAL_TLIM TASDEV_REG_SDW(0, 0x17, 0x58) + +/* TAS2783 SDCA Control - function number */ +#define FUNC_NUM_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ + +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 +#define TAS2783_SDCA_ENT_FU26 0x03 +#define TAS2783_SDCA_ENT_XU22 0x04 +#define TAS2783_SDCA_ENT_CS24 0x05 +#define TAS2783_SDCA_ENT_CS21 0x06 +#define TAS2783_SDCA_ENT_CS25 0x07 +#define TAS2783_SDCA_ENT_CS26 0x08 +#define TAS2783_SDCA_ENT_CS28 0x09 +#define TAS2783_SDCA_ENT_PDE23 0x0C +#define TAS2783_SDCA_ENT_UDMPU23 0x0E +#define TAS2783_SDCA_ENT_SAPU29 0x0F +#define TAS2783_SDCA_ENT_PPU21 0x10 +#define TAS2783_SDCA_ENT_PPU26 0x11 +#define TAS2783_SDCA_ENT_TG23 0x12 +#define TAS2783_SDCA_ENT_IT21 0x13 +#define TAS2783_SDCA_ENT_IT29 0x14 +#define TAS2783_SDCA_ENT_IT26 0x15 +#define TAS2783_SDCA_ENT_IT28 0x16 +#define TAS2783_SDCA_ENT_OT24 0x17 +#define TAS2783_SDCA_ENT_OT23 0x18 +#define TAS2783_SDCA_ENT_OT25 0x19 +#define TAS2783_SDCA_ENT_OT28 0x1A +#define TAS2783_SDCA_ENT_MU26 0x1b +#define TAS2783_SDCA_ENT_OT127 0x1E +#define TAS2783_SDCA_ENT_FU127 0x1F +#define TAS2783_SDCA_ENT_CS127 0x20 +#define TAS2783_SDCA_ENT_MFPU21 0x22 +#define TAS2783_SDCA_ENT_MFPU26 0x23 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POW_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 + +#define TAS2783_SDCA_POW_STATE_ON 0 +#define TAS2783_SDCA_POW_STATE_OFF 3 + +/* calibration data */ +#define TAS2783_CALIB_PARAMS 6 /* 5 + 1 unique id */ +#define TAS2783_CALIB_MAX_SPK_COUNT 8 +#define TAS2783_CALIB_HDR_SZ 12 +#define TAS2783_CALIB_CRC_SZ 4 +#define TAS2783_CALIB_DATA_SZ ((TAS2783_CALIB_HDR_SZ) + TAS2783_CALIB_CRC_SZ + \ + ((TAS2783_CALIB_PARAMS) * 4 * (TAS2783_CALIB_MAX_SPK_COUNT))) + +#if IS_ENABLED(CONFIG_SND_SOC_TAS2783_UTIL) +int32_t tas25xx_register_misc(struct sdw_slave *peripheral); +int32_t tas25xx_deregister_misc(void); +#endif + +#endif /*__TAS2783_H__ */ -- 2.25.1

2 4

Segfault in snd_config_delete due to incorrect node deletion in parse_array_def / parse_def
by GitHub issues - opened 09 Sep '25

09 Sep '25

alsa-project/alsa-lib issue #477 was opened from midzishi: While fuzzing snd_config_load() a reproducible segmentation fault inside snd_config_delete() was discovered. The root cause is incorrect cleanup logic in the configuration parser functions (parse_array_def() and parse_def()). In multiple branches, existing configuration nodes are replaced incorrectly: - The parser sometimes calls snd_config_delete(n) where n is NULL or a newly allocated node, instead of deleting the existing node returned by _snd_config_search() (variable g). - In other cases, a newly created node is added to the parent before its contents are successfully parsed. If parsing fails, the rollback path deletes this node explicitly, and later the parent deletes it again during recursive cleanup, so it causes double-free or corrupted linked list. This results in corrupted parent–child relationships and eventually SEGV when snd_config_delete() tries to read config->refcount of an already freed node. In both parse_array_def() and parse_def(), _snd_config_make_add() is called too early (before parsing child contents). On error, the parser deletes the child manually, but the parent will later delete it again during recursive cleanup. Proposed fix: ``` diff --git a/src/conf.c b/src/conf.c index 905c8f4d..7e403192 100644 --- a/src/conf.c +++ b/src/conf.c @@ -1274,7 +1274,8 @@ static int parse_array_def(snd_config_t *parent, input_t *input, int *idx, int s snprintf(static_id, sizeof(static_id), "%i", *idx); if (_snd_config_search(parent, static_id, -1, &g) == 0) { if (override) { - snd_config_delete(n); + snd_config_delete(g); + g = NULL; } else { /* merge */ (*idx)++; @@ -1305,7 +1306,7 @@ static int parse_array_def(snd_config_t *parent, input_t *input, int *idx, int s goto __end; } } else { - err = _snd_config_make_add(&n, &id, SND_CONFIG_TYPE_COMPOUND, parent); + err = _snd_config_make(&n, &id, SND_CONFIG_TYPE_COMPOUND); if (err < 0) goto __end; } @@ -1328,6 +1329,10 @@ static int parse_array_def(snd_config_t *parent, input_t *input, int *idx, int s err = LOCAL_UNEXPECTED_CHAR; goto __end; } + if (!skip && n && !n->parent) { + err = snd_config_add(parent, n); + if (err < 0) { snd_config_delete(n); goto __end; } + } break; } default: @@ -1422,7 +1427,7 @@ static int parse_def(snd_config_t *parent, input_t *input, int skip, int overrid err = -ENOENT; goto __end; } - err = _snd_config_make_add(&n, &id, SND_CONFIG_TYPE_COMPOUND, parent); + err = _snd_config_make(&n, &id, SND_CONFIG_TYPE_COMPOUND); if (err < 0) goto __end; n->u.compound.join = true; @@ -1464,7 +1469,7 @@ static int parse_def(snd_config_t *parent, input_t *input, int skip, int overrid goto __end; } } else { - err = _snd_config_make_add(&n, &id, SND_CONFIG_TYPE_COMPOUND, parent); + err = _snd_config_make(&n, &id, SND_CONFIG_TYPE_COMPOUND); if (err < 0) goto __end; } @@ -1483,6 +1488,10 @@ static int parse_def(snd_config_t *parent, input_t *input, int skip, int overrid err = LOCAL_UNEXPECTED_CHAR; goto __end; } + if (!skip && n && !n->parent) { + err = snd_config_add(parent, n); + if (err < 0) { snd_config_delete(n); goto __end; } + } break; } default: ``` Issue URL : https://github.com/alsa-project/alsa-lib/issues/477 Repository URL: https://github.com/alsa-project/alsa-lib

1 0