- Alsa-devel - mailman.alsa-project.org

[PATCH v1] ALSA: ASoc/tas2781: Fix an issue reported by robot kernel test
by Shenghao Ding 04 May '24

04 May '24

Fix an issue reported by robot kernel test and two harmless changes. Fixes: ef3bcde75d06 ("ASoc: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Changed the copyright year to 2024 - tasdevice-fmw.c --> tas2781-fmwlib.c - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405021200.YHInjV43-lkp@intel.com/ --- sound/soc/codecs/tas2781-fmwlib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 45760fe19523..a6be81adcb83 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // -// tasdevice-fmw.c -- TASDEVICE firmware support +// tas2781-fmwlib.c -- TASDEVICE firmware support // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -1878,7 +1878,7 @@ int tas2781_load_calibration(void *context, char *file_name, { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *)context; struct tasdevice *tasdev = &(tas_priv->tasdevice[i]); - const struct firmware *fw_entry; + const struct firmware *fw_entry = NULL; struct tasdevice_fw *tas_fmw; struct firmware fmw; int offset = 0; -- 2.34.1

2 1

[PATCH] ALSA: hda/cs_dsp_ctl: Actually remove ALSA controls
by Richard Fitzgerald 03 May '24

03 May '24

hda_cs_dsp_control_remove() must remove the ALSA control when deleting all the infrastructure for handling the control. Without this it is possible for ALSA controls to be left in the Soundcard after the amp driver module has been unloaded. So the get/set callbacks point to code that no longer exists. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: 3233b978af23 ("ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls") --- Note: it would be better to use the control private_free to do the cleanup, and that is my plan long-term. But that is a larger change to the code. I like to keep bugfix patches as simple as possible so they are low-risk and easy to cherry-pick into older kernels. So this patch fixes the bug. Sometime I will send a patch for future kernel versions that reworks the cleanup to use private_free. --- sound/pci/hda/hda_cs_dsp_ctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/hda_cs_dsp_ctl.c b/sound/pci/hda/hda_cs_dsp_ctl.c index 463ca06036bf..a42653d3473d 100644 --- a/sound/pci/hda/hda_cs_dsp_ctl.c +++ b/sound/pci/hda/hda_cs_dsp_ctl.c @@ -203,6 +203,10 @@ void hda_cs_dsp_control_remove(struct cs_dsp_coeff_ctl *cs_ctl) { struct hda_cs_dsp_coeff_ctl *ctl = cs_ctl->priv; + /* Only public firmware controls will have an associated kcontrol */ + if (ctl && ctl->kctl) + snd_ctl_remove(ctl->card, ctl->kctl); + kfree(ctl); } EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_control_remove, SND_HDA_CS_DSP_CONTROLS); -- 2.39.2

2 3

[PATCH v3] ALSA: ASoc/tas2781: Fix wrong loading calibrated data sequence
by Shenghao Ding 03 May '24

03 May '24

Calibrated data will be set to default after loading DSP config params, which will cause speaker protection work abnormally. Reload calibrated data after loading DSP config params. 'Fixes: 0a0877812628 ("ASoc: tas2781: Fix spelling mistake "calibraiton" -> "calibration"")' Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v3: - Remove redundant return in tasdev_load_calibrated_data - Put the second function parameter into the previous line for tasdev_load_calibrated_data - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405021200.YHInjV43-lkp@intel.com/ v2: - In the Subject, fixed --> Fix - In tas2781-fmwlib.c, tasdevice-fmw.c ---> tas2781-fmwlib.c - dsp --> DSP - Remove unneeded parentheses for & (dereference) operator - Add Fixes tag - Changed the copyright year to 2024 in the related files - In tas2781-dsp.h, __TASDEVICE_DSP_H__ --> __TAS2781_DSP_H__ v1: - Download calibrated data after loading the new DSP config params - call tasdevice_prmg_load instead of tasdevice_prmg_calibdata_load, it is unnecessary to load calibrated data after loading DSP program. Load it after loading DSP config params each time. - Remove tasdevice_prmg_calibdata_load, because it is unnecessary to load calibrated data after loading DSP program. --- include/sound/tas2781-dsp.h | 7 +-- sound/soc/codecs/tas2781-fmwlib.c | 99 +++++++------------------------ sound/soc/codecs/tas2781-i2c.c | 4 +- 3 files changed, 27 insertions(+), 83 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index ea9af2726a53..7fba7ea26a4b 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -13,8 +13,8 @@ // Author: Kevin Lu <kevin-lu(a)ti.com> // -#ifndef __TASDEVICE_DSP_H__ -#define __TASDEVICE_DSP_H__ +#ifndef __TAS2781_DSP_H__ +#define __TAS2781_DSP_H__ #define MAIN_ALL_DEVICES 0x0d #define MAIN_DEVICE_A 0x01 @@ -180,7 +180,6 @@ void tasdevice_calbin_remove(void *context); int tasdevice_select_tuningprm_cfg(void *context, int prm, int cfg_no, int rca_conf_no); int tasdevice_prmg_load(void *context, int prm_no); -int tasdevice_prmg_calibdata_load(void *context, int prm_no); void tasdevice_tuning_switch(void *context, int state); int tas2781_load_calibration(void *context, char *file_name, unsigned short i); diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 45760fe19523..2ab4c7a55b90 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2,7 +2,7 @@ // // tasdevice-fmw.c -- TASDEVICE firmware support // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -1878,7 +1878,7 @@ int tas2781_load_calibration(void *context, char *file_name, { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *)context; struct tasdevice *tasdev = &(tas_priv->tasdevice[i]); - const struct firmware *fw_entry; + const struct firmware *fw_entry = NULL; struct tasdevice_fw *tas_fmw; struct firmware fmw; int offset = 0; @@ -2151,6 +2151,18 @@ static int tasdevice_load_data(struct tasdevice_priv *tas_priv, return ret; } +static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i) +{ + struct tasdevice_fw *cal_fmw = priv->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration *cal = cal_fmw->calibrations; + + if (cal) + load_calib_data(priv, &cal->dev_data); + } +} + int tasdevice_select_tuningprm_cfg(void *context, int prm_no, int cfg_no, int rca_conf_no) { @@ -2210,21 +2222,9 @@ int tasdevice_select_tuningprm_cfg(void *context, int prm_no, for (i = 0; i < tas_priv->ndev; i++) { if (tas_priv->tasdevice[i].is_loaderr == true) continue; - else if (tas_priv->tasdevice[i].is_loaderr == false - && tas_priv->tasdevice[i].is_loading == true) { - struct tasdevice_fw *cal_fmw = - tas_priv->tasdevice[i].cali_data_fmw; - - if (cal_fmw) { - struct tasdevice_calibration - *cal = cal_fmw->calibrations; - - if (cal) - load_calib_data(tas_priv, - &(cal->dev_data)); - } + if (tas_priv->tasdevice[i].is_loaderr == false + && tas_priv->tasdevice[i].is_loading == true) tas_priv->tasdevice[i].cur_prog = prm_no; - } } } @@ -2247,9 +2247,13 @@ int tasdevice_select_tuningprm_cfg(void *context, int prm_no, if (tas_priv->tasdevice[i].is_loaderr == true) { status |= 1 << (i + 4); continue; - } else if (tas_priv->tasdevice[i].is_loaderr == false - && tas_priv->tasdevice[i].is_loading == true) + } + + if (tas_priv->tasdevice[i].is_loaderr == false + && tas_priv->tasdevice[i].is_loading == true) { + tasdev_load_calibrated_data(tas_priv, i); tas_priv->tasdevice[i].cur_conf = cfg_no; + } } } else dev_dbg(tas_priv->dev, "%s: Unneeded loading dsp conf %d\n", @@ -2308,65 +2312,6 @@ int tasdevice_prmg_load(void *context, int prm_no) } EXPORT_SYMBOL_NS_GPL(tasdevice_prmg_load, SND_SOC_TAS2781_FMWLIB); -int tasdevice_prmg_calibdata_load(void *context, int prm_no) -{ - struct tasdevice_priv *tas_priv = (struct tasdevice_priv *) context; - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_prog *program; - int prog_status = 0; - int i; - - if (!tas_fmw) { - dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); - goto out; - } - - if (prm_no >= tas_fmw->nr_programs) { - dev_err(tas_priv->dev, - "%s: prm(%d) is not in range of Programs %u\n", - __func__, prm_no, tas_fmw->nr_programs); - goto out; - } - - for (i = 0, prog_status = 0; i < tas_priv->ndev; i++) { - if (prm_no >= 0 && tas_priv->tasdevice[i].cur_prog != prm_no) { - tas_priv->tasdevice[i].cur_conf = -1; - tas_priv->tasdevice[i].is_loading = true; - prog_status++; - } - tas_priv->tasdevice[i].is_loaderr = false; - } - - if (prog_status) { - program = &(tas_fmw->programs[prm_no]); - tasdevice_load_data(tas_priv, &(program->dev_data)); - for (i = 0; i < tas_priv->ndev; i++) { - if (tas_priv->tasdevice[i].is_loaderr == true) - continue; - else if (tas_priv->tasdevice[i].is_loaderr == false - && tas_priv->tasdevice[i].is_loading == true) { - struct tasdevice_fw *cal_fmw = - tas_priv->tasdevice[i].cali_data_fmw; - - if (cal_fmw) { - struct tasdevice_calibration *cal = - cal_fmw->calibrations; - - if (cal) - load_calib_data(tas_priv, - &(cal->dev_data)); - } - tas_priv->tasdevice[i].cur_prog = prm_no; - } - } - } - -out: - return prog_status; -} -EXPORT_SYMBOL_NS_GPL(tasdevice_prmg_calibdata_load, - SND_SOC_TAS2781_FMWLIB); - void tasdevice_tuning_switch(void *context, int state) { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *) context; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b5abff230e43..9350972dfefe 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -414,7 +414,7 @@ static void tasdevice_fw_ready(const struct firmware *fmw, __func__, tas_priv->cal_binaryname[i]); } - tasdevice_prmg_calibdata_load(tas_priv, 0); + tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { -- 2.34.1

3 2

[PATCH V2 1/2] ASoC: amd: acp: fix for acp platform device creation failure
by Vijendar Mukunda 03 May '24

03 May '24

ACP pin configuration varies based on acp version. ACP PCI driver should read the ACP PIN config value and based on config value, it has to create a platform device in below two conditions. 1) If ACP PDM configuration is selected from BIOS and ACP PDM controller exists. 2) If ACP I2S configuration is selected from BIOS. Other than above scenarios, ACP PCI driver should skip the platform device creation logic, i.e. ACP PCI driver probe sequence should never fail if other acp pin configuration is selected. It should skip platform device creation logic. check_acp_pdm() function was implemented for ACP6.x platforms to check ACP PDM configuration. Previously, this code was safe guarded by FLAG_AMD_LEGACY_ONLY_DMIC flag check. This implementation breaks audio use cases for Huawei Matebooks which are based on ACP3.x varaint uses I2S configuration. In current scenario, check_acp_pdm() function returns -ENODEV value which results in ACP PCI driver probe failure without creating a platform device even in case of valid ACP pin configuration. Implement check_acp_config() as a common function which invokes platform specific acp pin configuration check functions for ACP3.x, ACP6.0 & ACP6.3 & ACP7.0 variants and checks for ACP PDM controller. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218780 Fixes: 4af565de9f8c ("ASoC: amd: acp: fix for acp pdm configuration check") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- changes since v1: - drop white line change which is not relevant to this patch. sound/soc/amd/acp/acp-legacy-common.c | 96 ++++++++++++++++++++++----- sound/soc/amd/acp/acp-pci.c | 8 +-- sound/soc/amd/acp/amd.h | 10 ++- sound/soc/amd/acp/chip_offset_byte.h | 1 + 4 files changed, 95 insertions(+), 20 deletions(-) diff --git a/sound/soc/amd/acp/acp-legacy-common.c b/sound/soc/amd/acp/acp-legacy-common.c index b5aff3f230be..3be7c6d55a6f 100644 --- a/sound/soc/amd/acp/acp-legacy-common.c +++ b/sound/soc/amd/acp/acp-legacy-common.c @@ -358,11 +358,25 @@ int smn_read(struct pci_dev *dev, u32 smn_addr) } EXPORT_SYMBOL_NS_GPL(smn_read, SND_SOC_ACP_COMMON); -int check_acp_pdm(struct pci_dev *pci, struct acp_chip_info *chip) +static void check_acp3x_config(struct acp_chip_info *chip) { - struct acpi_device *pdm_dev; - const union acpi_object *obj; - u32 pdm_addr, val; + u32 val; + + val = readl(chip->base + ACP3X_PIN_CONFIG); + switch (val) { + case ACP_CONFIG_4: + chip->is_i2s_config = true; + chip->is_pdm_config = true; + break; + default: + chip->is_pdm_config = true; + break; + } +} + +static void check_acp6x_config(struct acp_chip_info *chip) +{ + u32 val; val = readl(chip->base + ACP_PIN_CONFIG); switch (val) { @@ -371,42 +385,94 @@ int check_acp_pdm(struct pci_dev *pci, struct acp_chip_info *chip) case ACP_CONFIG_6: case ACP_CONFIG_7: case ACP_CONFIG_8: - case ACP_CONFIG_10: case ACP_CONFIG_11: + case ACP_CONFIG_14: + chip->is_pdm_config = true; + break; + case ACP_CONFIG_9: + chip->is_i2s_config = true; + break; + case ACP_CONFIG_10: case ACP_CONFIG_12: case ACP_CONFIG_13: + chip->is_i2s_config = true; + chip->is_pdm_config = true; + break; + default: + break; + } +} + +static void check_acp70_config(struct acp_chip_info *chip) +{ + u32 val; + + val = readl(chip->base + ACP_PIN_CONFIG); + switch (val) { + case ACP_CONFIG_4: + case ACP_CONFIG_5: + case ACP_CONFIG_6: + case ACP_CONFIG_7: + case ACP_CONFIG_8: + case ACP_CONFIG_11: case ACP_CONFIG_14: + case ACP_CONFIG_17: + case ACP_CONFIG_18: + chip->is_pdm_config = true; + break; + case ACP_CONFIG_9: + chip->is_i2s_config = true; + break; + case ACP_CONFIG_10: + case ACP_CONFIG_12: + case ACP_CONFIG_13: + case ACP_CONFIG_19: + case ACP_CONFIG_20: + chip->is_i2s_config = true; + chip->is_pdm_config = true; break; default: - return -EINVAL; + break; } +} + +void check_acp_config(struct pci_dev *pci, struct acp_chip_info *chip) +{ + struct acpi_device *pdm_dev; + const union acpi_object *obj; + u32 pdm_addr; switch (chip->acp_rev) { case ACP3X_DEV: pdm_addr = ACP_RENOIR_PDM_ADDR; + check_acp3x_config(chip); break; case ACP6X_DEV: pdm_addr = ACP_REMBRANDT_PDM_ADDR; + check_acp6x_config(chip); break; case ACP63_DEV: pdm_addr = ACP63_PDM_ADDR; + check_acp6x_config(chip); break; case ACP70_DEV: pdm_addr = ACP70_PDM_ADDR; + check_acp70_config(chip); break; default: - return -EINVAL; + break; } - pdm_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), pdm_addr, 0); - if (pdm_dev) { - if (!acpi_dev_get_property(pdm_dev, "acp-audio-device-type", - ACPI_TYPE_INTEGER, &obj) && - obj->integer.value == pdm_addr) - return 0; + if (chip->is_pdm_config) { + pdm_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), pdm_addr, 0); + if (pdm_dev) { + if (!acpi_dev_get_property(pdm_dev, "acp-audio-device-type", + ACPI_TYPE_INTEGER, &obj) && + obj->integer.value == pdm_addr) + chip->is_pdm_dev = true; + } } - return -ENODEV; } -EXPORT_SYMBOL_NS_GPL(check_acp_pdm, SND_SOC_ACP_COMMON); +EXPORT_SYMBOL_NS_GPL(check_acp_config, SND_SOC_ACP_COMMON); MODULE_LICENSE("Dual BSD/GPL"); diff --git a/sound/soc/amd/acp/acp-pci.c b/sound/soc/amd/acp/acp-pci.c index 5f35b90eab8d..d8314d2b331b 100644 --- a/sound/soc/amd/acp/acp-pci.c +++ b/sound/soc/amd/acp/acp-pci.c @@ -119,6 +119,10 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id if (ret) goto unregister_dmic_dev; + check_acp_config(pci, chip); + if (!chip->is_pdm_dev && !chip->is_i2s_config) + goto skip_pdev_creation; + res = devm_kcalloc(&pci->dev, num_res, sizeof(struct resource), GFP_KERNEL); if (!res) { ret = -ENOMEM; @@ -136,10 +140,6 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id } } - ret = check_acp_pdm(pci, chip); - if (ret < 0) - goto skip_pdev_creation; - chip->flag = flag; memset(&pdevinfo, 0, sizeof(pdevinfo)); diff --git a/sound/soc/amd/acp/amd.h b/sound/soc/amd/acp/amd.h index 5017e868f39b..d75b4eb34de8 100644 --- a/sound/soc/amd/acp/amd.h +++ b/sound/soc/amd/acp/amd.h @@ -138,6 +138,9 @@ struct acp_chip_info { void __iomem *base; /* ACP memory PCI base */ struct platform_device *chip_pdev; unsigned int flag; /* Distinguish b/w Legacy or Only PDM */ + bool is_pdm_dev; /* flag set to true when ACP PDM controller exists */ + bool is_pdm_config; /* flag set to true when PDM configuration is selected from BIOS */ + bool is_i2s_config; /* flag set to true when I2S configuration is selected from BIOS */ }; struct acp_stream { @@ -212,6 +215,11 @@ enum acp_config { ACP_CONFIG_13, ACP_CONFIG_14, ACP_CONFIG_15, + ACP_CONFIG_16, + ACP_CONFIG_17, + ACP_CONFIG_18, + ACP_CONFIG_19, + ACP_CONFIG_20, }; extern const struct snd_soc_dai_ops asoc_acp_cpu_dai_ops; @@ -240,7 +248,7 @@ void restore_acp_pdm_params(struct snd_pcm_substream *substream, int restore_acp_i2s_params(struct snd_pcm_substream *substream, struct acp_dev_data *adata, struct acp_stream *stream); -int check_acp_pdm(struct pci_dev *pci, struct acp_chip_info *chip); +void check_acp_config(struct pci_dev *pci, struct acp_chip_info *chip); static inline u64 acp_get_byte_count(struct acp_dev_data *adata, int dai_id, int direction) { diff --git a/sound/soc/amd/acp/chip_offset_byte.h b/sound/soc/amd/acp/chip_offset_byte.h index cfd6c4d07594..18da734c0e9e 100644 --- a/sound/soc/amd/acp/chip_offset_byte.h +++ b/sound/soc/amd/acp/chip_offset_byte.h @@ -20,6 +20,7 @@ #define ACP_SOFT_RESET 0x1000 #define ACP_CONTROL 0x1004 #define ACP_PIN_CONFIG 0x1440 +#define ACP3X_PIN_CONFIG 0x1400 #define ACP_EXTERNAL_INTR_REG_ADDR(adata, offset, ctrl) \ (adata->acp_base + adata->rsrc->irq_reg_offset + offset + (ctrl * 0x04)) -- 2.34.1

1 1

[PATCH v20 00/41] Introduce QC USB SND audio offloading support
by Wesley Cheng 03 May '24

03 May '24

Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Requesting to see if we can get some Acked-By tags, and merge on usb-next. Changelog -------------------------------------------- Changes in v20: - Fixed up some formatting changes pointed out in the usb.rst - Added SB null check during XHCI sideband unregister in case caller passes improper argument (xhci_sideband_unregister()) Changes in v19: - Rebased to usb-next to account for some new changes in dependent drivers. Changes in v18: - Rebased to usb-next, which merged in part of the series. Removed these patches. - Reworked Kconfigs for the ASoC USB related components from QCOM Q6DSP drivers to keep dependencies in place for SoC USB and USB SND. - Removed the repurposing of the stop ep sync API into existing XHCI operations. This will be solely used by the XHCI sideband for now. Changes in v17: - Fixed an issue where one patch was squashed into another. - Re-added some kconfig checks for helpers exposed in USB SND for the soc usb driver, after running different kconfigs. Changes in v16: - Modified some code layer dependencies so that soc usb can be split as a separate module. - Split the kcontrols from ASoC QCOM common layer into a separate driver - Reworked SOC USB kcontrols for controlling card + pcm offload routing and status so that there are individual controls for card and pcm devices. - Added a kcontrol remove API in SOC USB to remove the controls on the fly. This required to add some kcontrol management to SOC USB. - Removed the disconnect work and workqueue for the QC USB offload as it is not required, since QMI interface driver ensures events are handled in its own WQ. Changes in v15: - Removed some already merged XHCI changes - Separated SOC USB driver from being always compiled into SOC core. Now configurable from kconfig. - Fixed up ASoC kcontrol naming to fit guidelines. - Removed some unnecessary dummy ifdefs. - Moved usb snd offload capable kcontrol to be initialized by the platform offloading driver. Changes in v14: - Cleaned up some USB SND related feedback: - Renamed SNDUSB OFFLD playback available --> USB offload capable card - Fixed locking while checking if stream is in use - Replaced some mutex pairs with guard(mutex) Changes in v13: - Pulled in secondary/primary interrupter rework from Mathias from: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/drivers… - Did some cleanup and commit message updates, and tested on current code base. - Added mutex locking to xhci sideband to help prevent any race conditions, esp. for when accessing shared references. - Addresed concerns from Hillf about gfp_flags and locking used in qc_usb_audio_offload. - Rebased onto usb-next Changes in v12: - Updated copyright year to 2024. Happy new years! - Fixed newline format on mixer offload driver. Changes in v11: - Modified QMI format structures to be const Changes in v10: - Added new mixer for exposing kcontrol for sound card created by USB SND. This allows for applications to know which platform sound card has offload support. Will return the card number. - Broke down and cleaned up some functions/APIs within qc_audio_offload driver. - Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for the XHCI sideband to exist as a module. - Reworked the jack registration and moved it to the QCOM platform card driver, ie sm8250. - Added an SOC USB API to fetch a standard component tag that can be appended to the platform sound card. Added this tag to sm8250 if any USB path exists within the DT node. - Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic, so that naming can be standardized across solutions. SOC USB is now responsible for creation of these kcontrols. - Added a SOC USB RST document explaining some code flows and implementation details so that other vendors can utilize the framework. - Addressed a case where USB device connection events are lost if usb offload driver (qc_audio_offload) is not probed when everything else has been initialized, ie USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module init, to ensure that connection events will be propagated. - Rebased to usb-next. Changes in v9: - Fixed the dt binding check issue with regards to num-hc-interrupters. Changes in v8: - Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of the duplicate looping code that was present on previous patches. Also renamed the API. - Integrated Mathias' suggestions on his new sideband changes: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Addressed some of Mathias' fixme tags, such as: - Resetting transfer ring dequeue/enqueue pointers - Issuing stop endpoint command during ep removal - Reset ERDP properly to first segment ring during interrupter removal. (this is currently just being cleared to 0, but should be pointing to a valid segment if controller is still running. Changes in v7: - Fixed dt check error for q6usb bindings - Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx - Removed separate DWC3 HC interrupters num property, and place limits to XHCI one. - Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as it is not ensured event ring allocated is always done in the vmalloc range. Changes in v6: - Fixed limits and description on several DT bindings (XHCI and Q6USB) - Fixed patch subjects to follow other ALSA/ASoC notations. USB SND - Addressed devices which expose multiple audio (UAC) interfaces. These devices will create a single USB sound card with multiple audio streams, and receive multiple interface probe routines. QC offload was not properly considering cases with multiple probe calls. - Renamed offload module name and kconfig to fit within the SND domain. - Renamed attach/detach endpoint API to keep the hw_params notation. Changes in v5: - Removed some unnescessary files that were included - Fixed some typos mentioned - Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml XHCI: - Moved secondary skip events API to xhci-ring and updated implementation - Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue() USB SND - Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming. - Added a resume_cb() op for completion sake. - Addressed some locking concerns with regards to when registering for platform hooks. - Added routine to disconnect all offloaded devices during module unbind. ASoC - Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new snd_soc_usb_device structure to pass along PCM info. - Modified snd_jack set report to notify HEADPHONE event, as we do not support record path. Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userpsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Mathias Nyman (2): xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (39): usb: host: xhci: Export enable and disable interrupter APIs usb: host: xhci: Repurpose event handler for skipping interrupter events xhci: export XHCI IMOD setting helper for interrupters usb: host: xhci-sideband: Expose a sideband interrupter enable API usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 ALSA: usb-audio: Introduce USB SND platform op callbacks ALSA: usb-audio: Export USB SND APIs for modules ALSA: usb-audio: Save UAC sample size information usb: dwc3: Specify maximum number of XHCI interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present ALSA: usb-audio: qcom: Add USB QMI definitions ALSA: usb-audio: qcom: Introduce QC USB SND offloading support ALSA: usb-audio: Check for support for requested audio format ASoC: usb: Add PCM format check API for USB backend ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device ALSA: usb-audio: Prevent starting of audio stream if in use ALSA: usb-audio: Do not allow USB offload path if PCM device is in use ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ALSA: usb-audio: qcom: Populate PCM and USB chip information ASoC: qcom: qdsp6: Add support to track available USB PCM devices ASoC: Introduce SND kcontrols to select sound card and PCM device ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks ASoC: Introduce SND kcontrols to track USB offloading state ASoC: qcom: qdsp6: Add PCM ops to track current state ASoC: usb: Create SOC USB SND jack kcontrol ASoC: qcom: qdsp6: Add headphone jack for offload connection status ASoC: usb: Fetch ASoC sound card information ALSA: usb-audio: Add USB offloading capable kcontrol ALSA: usb-audio: Allow for rediscovery of connected USB SND devices ALSA: usb-audio: qcom: Use card and PCM index from QMI request ASoC: usb: Rediscover USB SND devices on USB port add ASoC: qcom: Populate SoC components string ASoC: doc: Add documentation for SOC USB .../bindings/sound/qcom,sm8250.yaml | 15 + Documentation/sound/soc/index.rst | 1 + Documentation/sound/soc/usb.rst | 611 ++++++ drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 3 + drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 2 + drivers/usb/host/xhci-mem.c | 37 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 50 +- drivers/usb/host/xhci-sideband.c | 444 ++++ drivers/usb/host/xhci.c | 48 +- drivers/usb/host/xhci.h | 18 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-sideband.h | 70 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 182 ++ sound/soc/Kconfig | 10 + sound/soc/Makefile | 2 + sound/soc/qcom/Kconfig | 15 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 60 + sound/soc/qcom/qdsp6/q6afe.c | 193 +- sound/soc/qcom/qdsp6/q6afe.h | 36 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 408 ++++ sound/soc/qcom/sm8250.c | 15 +- sound/soc/qcom/usb_offload_utils.c | 51 + sound/soc/qcom/usb_offload_utils.h | 26 + sound/soc/soc-usb.c | 660 ++++++ sound/usb/Kconfig | 25 + sound/usb/Makefile | 2 +- sound/usb/card.c | 109 + sound/usb/card.h | 15 + sound/usb/endpoint.c | 1 + sound/usb/format.c | 1 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 104 +- sound/usb/pcm.h | 11 + sound/usb/qcom/Makefile | 6 + sound/usb/qcom/mixer_usb_offload.c | 65 + sound/usb/qcom/mixer_usb_offload.h | 17 + sound/usb/qcom/qc_audio_offload.c | 1914 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 49 files changed, 6311 insertions(+), 53 deletions(-) create mode 100644 Documentation/sound/soc/usb.rst create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/qcom/usb_offload_utils.c create mode 100644 sound/soc/qcom/usb_offload_utils.h create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/mixer_usb_offload.c create mode 100644 sound/usb/qcom/mixer_usb_offload.h create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

4 54

usb:gadget:f_uac2: RFC: allowing multiple altsetttings for channel/samplesize combinations
by Pavel Hofman 02 May '24

02 May '24

Hi, I am considering implementation of multiple altsettings to f_uac2, so that multiple combinations of channels and samplesizes can be offered to the host. Configuration: -------------- * each altsetting for each direction should define * channel mask * samplesize * hs_bint bInterval * c_sync type (for capture only) Perhaps the easiest config would be allowing lists for the existing parameters (like the multiple samplerates were implemented). All the list params would have to have the same number of items - initial check. First values in the list would apply to altsetting 1, second to altsetting 2 etc. Or the altsetting could be some structured configfs param - please is there any recommended standard for structured configfs params? Should the config also adjust the list of allowed samplerates for each altsetting? Technically it makes sense as higher number of channels can decrease the max samplerate, e.g. for via a TDM interface. If so, it would need either the structured configuration or some "list of lists" format. Implementation: --------------- Parameters could be turned to arrays of fixed predefined sizes, like the p/s_srates. E.g. 5 max. altsettings in each direction would consume only 4 * (5-1) + 3* (5-1) = 28 extra ints (excluding the samplerates config). Currently all descriptor structs are statically pre-allocated as there are only two hard-coded altsettings. IMO the descriptors specific for each altsetting could be allocated dynamically in a loop over all none-zero alsettings. Please may I ask UAC2 gadget "stakeholders" for comments, suggestions, recommendations, so that my eventual initial version was in some generally acceptable direction? Thanks a lot, Pavel.

4 8

ASRock N100DC-ITX snd_usb_audio problems
by Florian Paul Schmidt 02 May '24

02 May '24

Hi! I recently acquired a ASRock N100DC-ITX mainboard with the goal to run some audio processing on it. After some tuning I got the board to behave nicely with e.g. cyclictest giving worst case latencies around 10 us with a recent -rt kernel. So the system shoudl be well equipped to run small period sizes. I have two USB audio class 2.0 audio interfaces here. 1. Focusrite 2i2 2nd gen 2. Tascam iXR Both these interfaces work fine on other systems, so I guess they are not the problem. And I used at least the Tascam with period sizes of e.g. 64 and 32 frames and 2 periods without problems (the 0.125 ms microframe resolution is good enough when it comes to the resulting jitter). But on this new system I cannot get either of the two interfaces to run with even 64 frames, 2 periods reliably. I tried jackd1, jack2, and the alsa_loopback program from Fons' libzita-alsa-pcmi. The system is well tuned with xhci IRQs at prio 90, jackd/alsa_loopback at prio 80 and all other kernel irq threads at prio 50. For 64 frames 2 periods 48000 samplerate $ LD_LIBRARY_PATH=../source/ ./alsa_loopback hw:USB hw:USB 48000 64 2 I get: May 02 12:37:35 ogfx100 kernel: retire_capture_urb: 1090 callbacks suppressed in the kernel log (every 5 seconds with the number of callbacks in the same ballpark) and alsa_loopback complaining: Error: pcm_wait returned 0. For 48 frames 2 periods 48000 samplerate (which should actually work better since the period boundaries should fall onto usb frame boundaries.) LD_LIBRARY_PATH=../source/ ./alsa_loopback hw:USB hw:USB 48000 48 2 I get: May 02 12:39:58 ogfx100 kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for slot 4 ep 1 with no TDs queued? over and over in the kernel log and alsa_loopback again complaining as above. On the other hand 48 frames, 3 periods works great! I measure jitter with jack_wakeup in an otherwise empty jack-graph: [fps@ogfx100:~]$ ./src/jack_wakeup/jack_wakeup min: 0.92522 ms; mean: 0.999884ms; max: 1.07727 ms 64 frames, 3 periods works ok-ish: [fps@ogfx100:~]$ ./src/jack_wakeup/jack_wakeup min: 0.938189 ms; mean: 1.33265ms; max: 1.59372 ms with 3 to 4 times the jitter I would expect giving the 0.125 ms microframe length of USB 2. Here I would expect output more like min: 1.25... ms; mean: 1.33265ms; max: 1.5... ms or min: 1.25... ms; mean: 1.33265ms; max: 1.375... ms I suspect that this is not a problem of the snd_usb_audio driver from ALSA but rather a problem with the XHCI in this board, since the combination of cards and snd_usb_audio driver work well on other systems. But maybe you have some insight or suggestions for me to try before reporting to LKML.. Looking forward to your replies and kind regards, FPS P.S.: [fps@ogfx100:~]$ uname -a Linux ogfx100 6.6.25-rt29 #1-NixOS SMP PREEMPT_RT Thu Apr 4 18:23:07 UTC 2024 x86_64 GNU/Linux I have tried with many other kernels though -rt and non-rt. That did not change much IIRC. I am P.P.S.: Find below the output of lspci -v, lspci -t, lsusb -v, cat /proc/cpuinfo [fps@ogfx100:~]$ lspci -v 00:00.0 Host bridge: Intel Corporation Device 461c Subsystem: ASRock Incorporation Device 461c Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics] (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Device 46d1 Flags: bus master, fast devsel, latency 0, IRQ 134 Memory at 6000000000 (64-bit, non-prefetchable) [size=16M] Memory at 4000000000 (64-bit, prefetchable) [size=256M] I/O ports at 4000 [size=64] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:0d.0 USB controller: Intel Corporation Device 464e (prog-if 30 [XHCI]) Flags: medium devsel, IRQ 129 Memory at 6001110000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.0 USB controller: Intel Corporation Device 54ed (prog-if 30 [XHCI]) Subsystem: ASRock Incorporation Device 54ed Flags: bus master, medium devsel, latency 0, IRQ 131 Memory at 6001100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 RAM memory: Intel Corporation Device 54ef Flags: fast devsel Memory at 6001124000 (64-bit, non-prefetchable) [disabled] [size=16K] Memory at 600112a000 (64-bit, non-prefetchable) [disabled] [size=4K] Capabilities: <access denied> 00:16.0 Communication controller: Intel Corporation Device 54e0 Subsystem: ASRock Incorporation Device 54e0 Flags: bus master, fast devsel, latency 0, IRQ 132 Memory at 6001129000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 SATA controller: Intel Corporation Device 54d3 (prog-if 01 [AHCI 1.0]) Subsystem: ASRock Incorporation Device 54d3 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 130 Memory at 80a00000 (32-bit, non-prefetchable) [size=8K] Memory at 80a03000 (32-bit, non-prefetchable) [size=256] I/O ports at 4090 [size=8] I/O ports at 4080 [size=4] I/O ports at 4060 [size=32] Memory at 80a02000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1c.0 PCI bridge: Intel Corporation Device 54be (prog-if 00 [Normal decode]) Subsystem: ASRock Incorporation Device 54be Flags: bus master, fast devsel, latency 0, IRQ 122 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 3000-3fff [size=4K] [16-bit] Memory behind bridge: 80900000-809fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 PCI bridge: Intel Corporation Device 54b0 (prog-if 00 [Normal decode]) Subsystem: ASRock Incorporation Device 54b0 Flags: bus master, fast devsel, latency 0, IRQ 123 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: 80800000-808fffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge: Intel Corporation Device 5481 Subsystem: ASRock Incorporation Device 5481 Flags: bus master, fast devsel, latency 0 00:1f.3 Audio device: Intel Corporation Device 54c8 Subsystem: ASRock Incorporation Device 3897 Flags: bus master, fast devsel, latency 32, IRQ 135 Memory at 6001120000 (64-bit, non-prefetchable) [size=16K] Memory at 6001000000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl 00:1f.4 SMBus: Intel Corporation Device 54a3 Subsystem: ASRock Incorporation Device 54a3 Flags: medium devsel, IRQ 16 Memory at 6001128000 (64-bit, non-prefetchable) [size=256] I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.5 Serial bus controller: Intel Corporation Device 54a4 Subsystem: ASRock Incorporation Device 54a4 Flags: fast devsel Memory at 80a04000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: intel-spi Kernel modules: spi_intel_pci 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Subsystem: ASRock Incorporation Motherboard (one of many) Flags: bus master, fast devsel, latency 0, IRQ 18 I/O ports at 3000 [size=256] Memory at 80904000 (64-bit, non-prefetchable) [size=4K] Memory at 80900000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 02:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. Device 5017 (rev 03) (prog-if 02 [NVM Express]) Subsystem: Kingston Technology Company, Inc. Device 5017 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at 80800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme [fps@ogfx100:~]$ lspci -t -[0000:00]-+-00.0 +-02.0 +-0d.0 +-14.0 +-14.2 +-16.0 +-17.0 +-1c.0-[01]----00.0 +-1d.0-[02]----00.0 +-1f.0 +-1f.3 +-1f.4 \-1f.5 [fps@ogfx100:~]$ sudo lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 6.06 iManufacturer 3 Linux 6.6.25-rt29 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:00:0d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0019 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 6.06 iManufacturer 3 Linux 6.6.25-rt29 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:00:0d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x003b bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x02 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 400 micro seconds SuperSpeedPlus USB Device Capability: bLength 44 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000067 Sublink Speed Attribute count 8 Sublink Speed ID count 4 wFunctionalitySupport 0x1104 Min functional Speed Attribute ID: 4 Min functional RX lanes: 1 Min functional TX lanes: 1 bmSublinkSpeedAttr[0] 0x00050034 Speed Attribute ID: 4 5Gb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[1] 0x000500b4 Speed Attribute ID: 4 5Gb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[2] 0x000a4035 Speed Attribute ID: 5 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[3] 0x000a40b5 Speed Attribute ID: 5 10Gb/s Symmetric TX SuperSpeedPlus bmSublinkSpeedAttr[4] 0x00054036 Speed Attribute ID: 6 5Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[5] 0x000540b6 Speed Attribute ID: 6 5Gb/s Symmetric TX SuperSpeedPlus bmSublinkSpeedAttr[6] 0x000a4037 Speed Attribute ID: 7 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[7] 0x000a40b7 Speed Attribute ID: 7 10Gb/s Symmetric TX SuperSpeedPlus Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 6.06 iManufacturer 3 Linux 6.6.25-rt29 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:00:14.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0019 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 12 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0xa0 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0303 lowspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0503 highspeed power enable connect Port 6: 0000.0503 highspeed power enable connect Port 7: 0000.0507 highspeed power suspend enable connect Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Port 11: 0000.0100 power Port 12: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc31c Keyboard K120 bcdDevice 64.00 iManufacturer 1 Logitech iProduct 2 USB Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x003b bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 U64.00_B0001 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 2 USB Keyboard HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 iInterface 2 USB Keyboard HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 159 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 255 Device Status: 0x0000 (Bus Powered) Bus 003 Device 003: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x2074 ASM1074 High-Speed hub bcdDevice 2.00 iManufacturer 2 Asmedia iProduct 3 ASM107x iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000000 (Missing must-be-set LPM bit!) SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {cfe2b8a8-57df-4db7-9881-214005c7fbe5} Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00a9 Per-port power switching Per-port overcurrent protection TT think time 16 FS bits Port indicators bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 004: ID 1235:8202 Focusrite-Novation Focusrite Scarlett 2i2 2nd Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 [unknown] bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1235 Focusrite-Novation idProduct 0x8202 Focusrite Scarlett 2i2 2nd Gen bcdDevice 4.1b iManufacturer 1 Focusrite iProduct 3 Scarlett 2i2 USB iSerial 0 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0116 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 9 Internal bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 3 bFunctionClass 1 Audio bFunctionSubClass 0 [unknown] bFunctionProtocol 32 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 32 iInterface 3 Scarlett 2i2 USB AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 2.00 bCategory 8 wTotalLength 0x0077 bmControls 0x00 AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 41 bmAttributes 3 Internal programmable clock bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 10 USB Internal AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 11 (CLOCK_SELECTOR) bClockID 40 bNrInPins 1 baCSourceID(0) 41 bmControls 0x03 Clock Selector Control (read/write) iClockSelector 8 Clock Source AudioControl Interface Descriptor: bLength 17 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bCSourceID 40 bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 12 Output 1 bmControls 0x0000 iTerminal 6 Scarlett 2i2 USB AudioControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 10 bSourceID 2 bmaControls(0) 0x00000000 bmaControls(1) 0x00000000 bmaControls(2) 0x00000000 iFeature 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 20 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 10 bCSourceID 40 bmControls 0x0000 iTerminal 0 AudioControl Interface Descriptor: bLength 17 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 0 bCSourceID 40 bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 14 Input 1 bmControls 0x0000 iTerminal 0 AudioControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 11 bSourceID 1 bmaControls(0) 0x00000000 bmaControls(1) 0x00000000 bmaControls(2) 0x00000000 iFeature 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 22 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 11 bCSourceID 40 bmControls 0x0000 iTerminal 7 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 4 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 4 Scarlett 2i2 USB AudioStreaming Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bmControls 0x00 bFormatType 1 bmFormats 0x00000001 PCM bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 12 Output 1 AudioStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bSubslotSize 4 bBitResolution 24 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 13 Transfer Type Isochronous Synch Type Synchronous Usage Type Data wMaxPacketSize 0x00c8 1x 200 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 8 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bmControls 0x00 bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0008 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 17 Transfer Type Isochronous Synch Type None Usage Type Feedback wMaxPacketSize 0x0004 1x 4 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 5 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 5 Scarlett 2i2 USB AudioStreaming Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 22 bmControls 0x00 bFormatType 1 bmFormats 0x00000001 PCM bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 14 Input 1 AudioStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bSubslotSize 4 bBitResolution 24 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 37 Transfer Type Isochronous Synch Type Asynchronous Usage Type Implicit feedback Data wMaxPacketSize 0x00c8 1x 200 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 8 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bmControls 0x00 bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0008 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 [unknown] bInterfaceProtocol 16 iInterface 11 Focusrite Control Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 8 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0116 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 9 Internal bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 3 bFunctionClass 1 Audio bFunctionSubClass 0 [unknown] bFunctionProtocol 32 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 32 iInterface 3 Scarlett 2i2 USB AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 2.00 bCategory 8 wTotalLength 0x0077 bmControls 0x00 AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 41 bmAttributes 3 Internal programmable clock bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 10 USB Internal AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 11 (CLOCK_SELECTOR) bClockID 40 bNrInPins 1 baCSourceID(0) 41 bmControls 0x03 Clock Selector Control (read/write) iClockSelector 8 Clock Source AudioControl Interface Descriptor: bLength 17 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bCSourceID 40 bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 12 Output 1 bmControls 0x0000 iTerminal 6 Scarlett 2i2 USB AudioControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 10 bSourceID 2 bmaControls(0) 0x00000000 bmaControls(1) 0x00000000 bmaControls(2) 0x00000000 iFeature 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 20 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 10 bCSourceID 40 bmControls 0x0000 iTerminal 0 AudioControl Interface Descriptor: bLength 17 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 0 bCSourceID 40 bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 14 Input 1 bmControls 0x0000 iTerminal 0 AudioControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 11 bSourceID 1 bmaControls(0) 0x00000000 bmaControls(1) 0x00000000 bmaControls(2) 0x00000000 iFeature 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 22 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 11 bCSourceID 40 bmControls 0x0000 iTerminal 7 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 4 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 4 Scarlett 2i2 USB AudioStreaming Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bmControls 0x00 bFormatType 1 bmFormats 0x00000001 PCM bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 12 Output 1 AudioStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bSubslotSize 4 bBitResolution 24 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 13 Transfer Type Isochronous Synch Type Synchronous Usage Type Data wMaxPacketSize 0x00c8 1x 200 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 8 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bmControls 0x00 bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0008 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 17 Transfer Type Isochronous Synch Type None Usage Type Feedback wMaxPacketSize 0x0004 1x 4 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 5 Scarlett 2i2 USB Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 32 iInterface 5 Scarlett 2i2 USB AudioStreaming Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 22 bmControls 0x00 bFormatType 1 bmFormats 0x00000001 PCM bNrChannels 2 bmChannelConfig 0x00000000 iChannelNames 14 Input 1 AudioStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bSubslotSize 4 bBitResolution 24 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 37 Transfer Type Isochronous Synch Type Asynchronous Usage Type Implicit feedback Data wMaxPacketSize 0x00c8 1x 200 bytes bInterval 1 AudioStreaming Endpoint Descriptor: bLength 8 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x00 bmControls 0x00 bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0008 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 [unknown] bInterfaceProtocol 16 iInterface 11 Focusrite Control Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 8 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 003 Device 005: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x148f Ralink Technology, Corp. idProduct 0x2070 RT2070 Wireless Adapter bcdDevice 1.01 iManufacturer 1 Ralink iProduct 2 802.11 g WLAN iSerial 3 1.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 450mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 1.0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 003 Device 006: ID 05e3:0610 Genesys Logic, Inc. Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0610 Hub bcdDevice 60.52 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e9 Per-port power switching Per-port overcurrent protection TT think time 32 FS bits Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 6.06 iManufacturer 3 Linux 6.6.25-rt29 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 0000:00:14.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x005b bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x02 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 160 micro seconds SuperSpeedPlus USB Device Capability: bLength 76 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x000000ef Sublink Speed Attribute count 16 Sublink Speed ID count 8 wFunctionalitySupport 0x1106 Min functional Speed Attribute ID: 6 Min functional RX lanes: 1 Min functional TX lanes: 1 bmSublinkSpeedAttr[0] 0x00050034 Speed Attribute ID: 4 5Gb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[1] 0x000500b4 Speed Attribute ID: 4 5Gb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[2] 0x000a4035 Speed Attribute ID: 5 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[3] 0x000a40b5 Speed Attribute ID: 5 10Gb/s Symmetric TX SuperSpeedPlus bmSublinkSpeedAttr[4] 0x00e00026 Speed Attribute ID: 6 224Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[5] 0x00e000a6 Speed Attribute ID: 6 224Mb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[6] 0x00c00027 Speed Attribute ID: 7 192Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[7] 0x00c000a7 Speed Attribute ID: 7 192Mb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[8] 0x00800028 Speed Attribute ID: 8 128Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[9] 0x008000a8 Speed Attribute ID: 8 128Mb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[10] 0x00b10029 Speed Attribute ID: 9 177Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[11] 0x00b100a9 Speed Attribute ID: 9 177Mb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[12] 0x0063002a Speed Attribute ID: 10 99Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[13] 0x006300aa Speed Attribute ID: 10 99Mb/s Symmetric TX SuperSpeed bmSublinkSpeedAttr[14] 0x00c6002b Speed Attribute ID: 11 198Mb/s Symmetric RX SuperSpeed bmSublinkSpeedAttr[15] 0x00c600ab Speed Attribute ID: 11 198Mb/s Symmetric TX SuperSpeed Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x02 Hub Port Status: Port 1: 0000.0263 5Gbps power suspend enable connect Ext Status: 0000.0044 RX Speed Attribute ID: 4 Lanes: 1 TX Speed Attribute ID: 4 Lanes: 1 Port 2: 0000.02a0 5Gbps power Rx.Detect Port 3: 0000.02a0 5Gbps power Rx.Detect Port 4: 0000.02a0 5Gbps power Rx.Detect Device Status: 0x0001 Self Powered Bus 004 Device 002: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 [unknown] bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x3074 ASM1074 SuperSpeed hub bcdDevice 2.00 iManufacturer 2 Asmedia iProduct 3 ASM107x iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 8mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 19 Transfer Type Interrupt Synch Type None Usage Type Feedback wMaxPacketSize 0x0002 1x 2 bytes bInterval 8 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000000 (Missing must-be-set LPM bit!) SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {cfe2b8a8-57df-4db7-9881-214005c7fbe5} Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 60 * 2 milli seconds bHubContrCurrent 400 milli Ampere bHubDecLat 0.4 micro seconds wHubDelay 3492 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Port 3: 0000.02a0 5Gbps power Rx.Detect Port 4: 0000.02a0 5Gbps power Rx.Detect Device Status: 0x000d Self Powered U1 Enabled U2 Enabled [fps@ogfx100:~]$ sudo lsusb -t /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 480M /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 20000M/x2 /: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M |__ Port 002: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 002: Dev 002, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 005: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 002: Dev 005, If 0, Class=Vendor Specific Class, Driver=rt2800usb, 480M |__ Port 006: Dev 004, If 0, Class=Audio, Driver=snd-usb-audio, 480M |__ Port 006: Dev 004, If 1, Class=Audio, Driver=snd-usb-audio, 480M |__ Port 006: Dev 004, If 2, Class=Audio, Driver=snd-usb-audio, 480M |__ Port 006: Dev 004, If 3, Class=Vendor Specific Class, Driver=[none], 480M |__ Port 007: Dev 006, If 0, Class=Hub, Driver=hub/4p, 480M /: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 10000M |__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/4p, 5000M [fps@ogfx100:~]$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 190 model name : Intel(R) N100 stepping : 0 microcode : 0x15 cpu MHz : 700.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq rdpid movdiri movdir64b fsrm md_clear serialize arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs rfds bogomips : 1612.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 190 model name : Intel(R) N100 stepping : 0 microcode : 0x15 cpu MHz : 3052.591 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq rdpid movdiri movdir64b fsrm md_clear serialize arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs rfds bogomips : 1612.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 190 model name : Intel(R) N100 stepping : 0 microcode : 0x15 cpu MHz : 3148.532 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 4 initial apicid : 4 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq rdpid movdiri movdir64b fsrm md_clear serialize arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs rfds bogomips : 1612.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 190 model name : Intel(R) N100 stepping : 0 microcode : 0x15 cpu MHz : 3125.526 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq rdpid movdiri movdir64b fsrm md_clear serialize arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs rfds bogomips : 1612.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: -- https://dfdx.eu

1 0

[PATCH] ALSA: hda: cs35l56: Perform firmware download in the background
by Simon Trimmer 02 May '24

02 May '24

It is possible that during system boot when there multiple devices attempting simultaneous initialization on a slow control bus the download of firmware and tuning data may take a user perceivable amount of time. Adopt a pattern used in the ASoC driver and perform this activity in a background thread so that interactive performance is not impaired. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> --- sound/pci/hda/cs35l56_hda.c | 89 ++++++++++++++++++++++++++++++------- sound/pci/hda/cs35l56_hda.h | 4 ++ 2 files changed, 76 insertions(+), 17 deletions(-) diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 1a3f84599cb5..042c2407c007 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -13,6 +13,7 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/slab.h> +#include <linux/workqueue.h> #include <sound/core.h> #include <sound/cs-amp-lib.h> #include <sound/hda_codec.h> @@ -50,11 +51,19 @@ static const struct reg_sequence cs35l56_hda_dai_config[] = { }; +static void cs35l56_hda_wait_dsp_ready(struct cs35l56_hda *cs35l56) +{ + /* Wait for patching to complete */ + flush_work(&cs35l56->dsp_work); +} + static void cs35l56_hda_play(struct cs35l56_hda *cs35l56) { unsigned int val; int ret; + cs35l56_hda_wait_dsp_ready(cs35l56); + pm_runtime_get_sync(cs35l56->base.dev); ret = cs35l56_mbox_send(&cs35l56->base, CS35L56_MBOX_CMD_AUDIO_PLAY); if (ret == 0) { @@ -180,6 +189,8 @@ static int cs35l56_hda_mixer_get(struct snd_kcontrol *kcontrol, unsigned int reg_val; int i; + cs35l56_hda_wait_dsp_ready(cs35l56); + regmap_read(cs35l56->base.regmap, kcontrol->private_value, &reg_val); reg_val &= CS35L56_ASP_TXn_SRC_MASK; @@ -203,6 +214,8 @@ static int cs35l56_hda_mixer_put(struct snd_kcontrol *kcontrol, if (item >= CS35L56_NUM_INPUT_SRC) return -EINVAL; + cs35l56_hda_wait_dsp_ready(cs35l56); + regmap_update_bits_check(cs35l56->base.regmap, kcontrol->private_value, CS35L56_INPUT_MASK, cs35l56_tx_input_values[item], &changed); @@ -227,6 +240,8 @@ static int cs35l56_hda_posture_get(struct snd_kcontrol *kcontrol, unsigned int pos; int ret; + cs35l56_hda_wait_dsp_ready(cs35l56); + ret = regmap_read(cs35l56->base.regmap, CS35L56_MAIN_POSTURE_NUMBER, &pos); if (ret) return ret; @@ -248,6 +263,8 @@ static int cs35l56_hda_posture_put(struct snd_kcontrol *kcontrol, (pos > CS35L56_MAIN_POSTURE_MAX)) return -EINVAL; + cs35l56_hda_wait_dsp_ready(cs35l56); + ret = regmap_update_bits_check(cs35l56->base.regmap, CS35L56_MAIN_POSTURE_NUMBER, CS35L56_MAIN_POSTURE_MASK, @@ -291,6 +308,8 @@ static int cs35l56_hda_vol_get(struct snd_kcontrol *kcontrol, int vol; int ret; + cs35l56_hda_wait_dsp_ready(cs35l56); + ret = regmap_read(cs35l56->base.regmap, CS35L56_MAIN_RENDER_USER_VOLUME, &raw_vol); if (ret) @@ -323,6 +342,8 @@ static int cs35l56_hda_vol_put(struct snd_kcontrol *kcontrol, raw_vol = (vol + CS35L56_MAIN_RENDER_USER_VOLUME_MIN) << CS35L56_MAIN_RENDER_USER_VOLUME_SHIFT; + cs35l56_hda_wait_dsp_ready(cs35l56); + ret = regmap_update_bits_check(cs35l56->base.regmap, CS35L56_MAIN_RENDER_USER_VOLUME, CS35L56_MAIN_RENDER_USER_VOLUME_MASK, @@ -539,8 +560,9 @@ static void cs35l56_hda_release_firmware_files(const struct firmware *wmfw_firmw kfree(coeff_filename); } -static void cs35l56_hda_add_dsp_controls(struct cs35l56_hda *cs35l56) +static void cs35l56_hda_create_dsp_controls_work(struct work_struct *work) { + struct cs35l56_hda *cs35l56 = container_of(work, struct cs35l56_hda, control_work); struct hda_cs_dsp_ctl_info info; info.device_name = cs35l56->amp_name; @@ -566,7 +588,7 @@ static void cs35l56_hda_apply_calibration(struct cs35l56_hda *cs35l56) dev_info(cs35l56->base.dev, "Calibration applied\n"); } -static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) +static void cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) { const struct firmware *coeff_firmware = NULL; const struct firmware *wmfw_firmware = NULL; @@ -574,15 +596,27 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) char *wmfw_filename = NULL; unsigned int preloaded_fw_ver; bool firmware_missing; - int ret = 0; + bool add_dsp_controls_required = false; + int ret; - /* Prepare for a new DSP power-up */ + /* + * Prepare for a new DSP power-up. If the DSP has had firmware + * downloaded previously then it needs to be powered down so that it + * can be updated and if hadn't been patched before then the controls + * will need to be added once firmware download succeeds. + */ if (cs35l56->base.fw_patched) cs_dsp_power_down(&cs35l56->cs_dsp); + else + add_dsp_controls_required = true; cs35l56->base.fw_patched = false; - pm_runtime_get_sync(cs35l56->base.dev); + ret = pm_runtime_resume_and_get(cs35l56->base.dev); + if (ret < 0) { + dev_err(cs35l56->base.dev, "Failed to resume and get %d\n", ret); + return; + } /* * The firmware can only be upgraded if it is currently running @@ -606,7 +640,6 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) */ if (!coeff_firmware && firmware_missing) { dev_err(cs35l56->base.dev, ".bin file required but not found\n"); - ret = -ENOENT; goto err_fw_release; } @@ -657,6 +690,15 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) CS35L56_FIRMWARE_MISSING); cs35l56->base.fw_patched = true; + /* + * Adding controls is deferred to prevent a lock inversion - ALSA takes + * the controls_rwsem when adding a control, the get() / put() + * functions of a control are called holding controls_rwsem and those + * that depend on running firmware wait for dsp_work() to complete. + */ + if (add_dsp_controls_required) + queue_work(cs35l56->dsp_wq, &cs35l56->control_work); + ret = cs_dsp_run(&cs35l56->cs_dsp); if (ret) dev_dbg(cs35l56->base.dev, "%s: cs_dsp_run ret %d\n", __func__, ret); @@ -676,15 +718,19 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) coeff_firmware, coeff_filename); err_pm_put: pm_runtime_put(cs35l56->base.dev); +} - return ret; +static void cs35l56_hda_dsp_work(struct work_struct *work) +{ + struct cs35l56_hda *cs35l56 = container_of(work, struct cs35l56_hda, dsp_work); + + cs35l56_hda_fw_load(cs35l56); } static int cs35l56_hda_bind(struct device *dev, struct device *master, void *master_data) { struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev); struct hda_component *comps = master_data; - int ret; if (!comps || cs35l56->index < 0 || cs35l56->index >= HDA_MAX_COMPONENTS) return -EINVAL; @@ -698,12 +744,9 @@ static int cs35l56_hda_bind(struct device *dev, struct device *master, void *mas strscpy(comps->name, dev_name(dev), sizeof(comps->name)); comps->playback_hook = cs35l56_hda_playback_hook; - ret = cs35l56_hda_fw_load(cs35l56); - if (ret) - return ret; + queue_work(cs35l56->dsp_wq, &cs35l56->dsp_work); cs35l56_hda_create_controls(cs35l56); - cs35l56_hda_add_dsp_controls(cs35l56); #if IS_ENABLED(CONFIG_SND_DEBUG) cs35l56->debugfs_root = debugfs_create_dir(dev_name(cs35l56->base.dev), sound_debugfs_root); @@ -720,6 +763,9 @@ static void cs35l56_hda_unbind(struct device *dev, struct device *master, void * struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev); struct hda_component *comps = master_data; + cancel_work_sync(&cs35l56->dsp_work); + cancel_work_sync(&cs35l56->control_work); + cs35l56_hda_remove_controls(cs35l56); #if IS_ENABLED(CONFIG_SND_DEBUG) @@ -747,6 +793,10 @@ static int cs35l56_hda_system_suspend(struct device *dev) { struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev); + cs35l56_hda_wait_dsp_ready(cs35l56); + + flush_work(&cs35l56->control_work); + if (cs35l56->playing) cs35l56_hda_pause(cs35l56); @@ -842,11 +892,8 @@ static int cs35l56_hda_system_resume(struct device *dev) ret = cs35l56_is_fw_reload_needed(&cs35l56->base); dev_dbg(cs35l56->base.dev, "fw_reload_needed: %d\n", ret); - if (ret > 0) { - ret = cs35l56_hda_fw_load(cs35l56); - if (ret) - return ret; - } + if (ret > 0) + queue_work(cs35l56->dsp_wq, &cs35l56->dsp_work); if (cs35l56->playing) cs35l56_hda_play(cs35l56); @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id) mutex_init(&cs35l56->base.irq_lock); dev_set_drvdata(cs35l56->base.dev, cs35l56); + cs35l56->dsp_wq = create_singlethread_workqueue("cs35l56-dsp"); + if (!cs35l56->dsp_wq) { + ret = -ENOMEM; + goto err; + } + INIT_WORK(&cs35l56->dsp_work, cs35l56_hda_dsp_work); + INIT_WORK(&cs35l56->control_work, cs35l56_hda_create_dsp_controls_work); + ret = cs35l56_hda_read_acpi(cs35l56, hid, id); if (ret) goto err; diff --git a/sound/pci/hda/cs35l56_hda.h b/sound/pci/hda/cs35l56_hda.h index 464e4aa63cd1..d207e4e0d167 100644 --- a/sound/pci/hda/cs35l56_hda.h +++ b/sound/pci/hda/cs35l56_hda.h @@ -14,6 +14,7 @@ #include <linux/firmware/cirrus/cs_dsp.h> #include <linux/firmware/cirrus/wmfw.h> #include <linux/regulator/consumer.h> +#include <linux/workqueue.h> #include <sound/cs35l56.h> struct dentry; @@ -21,6 +22,9 @@ struct dentry; struct cs35l56_hda { struct cs35l56_base base; struct hda_codec *codec; + struct work_struct dsp_work; + struct work_struct control_work; + struct workqueue_struct *dsp_wq; int index; const char *system_name; -- 2.34.1

3 5

[PATCH v5 00/18] ASoC: Cleanup MediaTek soundcard machine drivers
by AngeloGioacchino Del Regno 02 May '24

02 May '24

Changes in v5: - Cleaned up MT8186 soundcard migration commit which erroneously had leftovers from development - Changed the mtk_pcm_constraints_data structure to hold pointers to snd_pcm_hw_constraint_list, as to really reuse the const data - Tested again on all of the listed MTK platforms. Changes in v4: - Rebased over next-20240409 - Dropped the first 4 patches from v3 as were already picked by Mark - Fixed W=1 build issue Changes in v3: - Added audio-routing names in enum in all yaml files - Added mention of disallowing old and new properties together in commit message of bindings patches - Fixed validation errors with sound-card-common.yaml inclusion due to missing model property in examples - Removed `else` enforcing headset-codec/speaker-codecs requirement if xxx-dai-link not present to avoid future commit noise as the deprecated statement will disallow deprecated properties as required Changes in v2: - Bindings: Changed link-name/codec/clk-provider to remove `items` and leave just the enum - Moved .*-dai-link pattern additionalProperties after `type: object` - Added ref to sound-card-common.yaml - Fixed dai-link-xxx -> xxx-dai-link typo in example comment This series performs a cleanup of most of the MediaTek AFE drivers and soundcard machine drivers, reducing code duplication and setting a base to be consistent with their devicetree bindings, as many of those are using different properties and nodes for no good reason. Summarizing: - Commonizes functions and ops where possible - Adds a common probe mechanism, increasing maintainability of soundcard drivers for older MediaTek SoCs - Migrates all drivers to support the new bindings - Obviously retains compatibility with old device trees - Reduces machine-specific parameters hardcoding in drivers - Can now set machine-specific params in device tree - Uses the `audio-routing` and `dai-link` nodes like some other non-MediaTek SoC sound drivers - Imposes consistency between MediaTek ASoC machine soundcard drivers bindings - Reduces code size and greatly reduces the amount of code that will be required for newer drivers (retaining compatibility with the old bindings was costly in terms of code size, otherwise this series would've removed ~1000 more lines, or something along that line). This series was (manually) tested on MT8173, MT8192, MT8195 and MT8186 Chromebooks. AngeloGioacchino Del Regno (18): ASoC: mediatek: Add common machine soundcard driver probe mechanism ASoC: mediatek: common: Constify struct mtk_sof_priv ASoC: mediatek: mt8188: Migrate to mtk_soundcard_common_probe ASoC: mediatek: mt8195: Migrate to mtk_soundcard_common_probe ASoC: mediatek: mt8192: Migrate to mtk_soundcard_common_probe ASoC: mediatek: mt8186: Migrate to mtk_soundcard_common_probe ASoC: mediatek: Add common snd_soc_ops .startup() callback ASoC: mediatek: mt8195: Migrate to the common mtk_soundcard_startup ASoC: mediatek: mt8192: Migrate to the common mtk_soundcard_startup ASoC: mediatek: mt8186-rt1019: Migrate to the common mtk_soundcard_startup ASoC: mediatek: Add common mtk_afe_component_probe callback ASoC: mediatek: Use common mtk_afe_pcm_platform with common probe cb ASoC: mediatek: mt8186: Unify mt8186-mt6366 machine drivers ASoC: dt-bindings: mt8195: Document audio-routing and dai-link subnode ASoC: dt-bindings: mt8192: Document audio-routing and dai-link subnode ASoC: dt-bindings: mt8186: Document audio-routing and dai-link subnode arm64: dts: mediatek: mt8195-cherry: Specify sound DAI links and routing arm64: dts: mediatek: mt8186-corsola: Specify sound DAI links and routing .../sound/mt8186-mt6366-da7219-max98357.yaml | 131 +- .../sound/mt8186-mt6366-rt1019-rt5682s.yaml | 120 +- .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 139 +- .../bindings/sound/mt8195-mt6359.yaml | 134 ++ .../boot/dts/mediatek/mt8186-corsola.dtsi | 42 +- .../boot/dts/mediatek/mt8195-cherry.dtsi | 45 + sound/soc/mediatek/Kconfig | 24 +- .../mediatek/common/mtk-afe-platform-driver.c | 18 + .../soc/mediatek/common/mtk-dsp-sof-common.c | 15 +- .../soc/mediatek/common/mtk-dsp-sof-common.h | 1 - sound/soc/mediatek/common/mtk-soc-card.h | 7 +- .../mediatek/common/mtk-soundcard-driver.c | 199 +++ .../mediatek/common/mtk-soundcard-driver.h | 42 + sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 14 +- sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 14 +- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 14 +- sound/soc/mediatek/mt8186/Makefile | 3 +- .../mt8186/mt8186-mt6366-da7219-max98357.c | 1189 ----------------- ...t6366-rt1019-rt5682s.c => mt8186-mt6366.c} | 578 ++++---- sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 21 +- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 203 +-- sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 25 +- .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 301 ++--- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 21 +- sound/soc/mediatek/mt8195/mt8195-mt6359.c | 487 +++---- 25 files changed, 1597 insertions(+), 2190 deletions(-) delete mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c rename sound/soc/mediatek/mt8186/{mt8186-mt6366-rt1019-rt5682s.c => mt8186-mt6366.c} (72%) -- 2.44.0

3 20

[tiwai-sound:for-linus 1/4] sound/pci/hda/patch_realtek.c:7222:8: error: no member named 'power_hook' in 'struct alc_spec'
by kernel test robot 01 May '24

01 May '24

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-linus head: 9b3c22ab3929672b117f5c46d718692abb65da0b commit: 1e707769df072757bdcafab158bb159ead73daa4 [1/4] ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318 config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20240502/202405020226.ddBTVUNI-lkp@…) compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 37ae4ad0eef338776c7e2cffb3896153d43dcd90) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240502/202405020226.ddBTVUNI-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405020226.ddBTVUNI-lkp@intel.com/ Note: the tiwai-sound/for-linus HEAD 9b3c22ab3929672b117f5c46d718692abb65da0b builds fine. It only hurts bisectability. All errors (new ones prefixed by >>): In file included from sound/pci/hda/patch_realtek.c:17: In file included from include/linux/pci.h:38: In file included from include/linux/interrupt.h:11: In file included from include/linux/hardirq.h:11: In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1: In file included from include/asm-generic/hardirq.h:17: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:328: include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 547 | val = __raw_readb(PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 560 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr)); | ~~~~~~~~~~ ^ include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu' 37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ In file included from sound/pci/hda/patch_realtek.c:17: In file included from include/linux/pci.h:38: In file included from include/linux/interrupt.h:11: In file included from include/linux/hardirq.h:11: In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1: In file included from include/asm-generic/hardirq.h:17: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:328: include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 573 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr)); | ~~~~~~~~~~ ^ include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu' 35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) | ^ In file included from sound/pci/hda/patch_realtek.c:17: In file included from include/linux/pci.h:38: In file included from include/linux/interrupt.h:11: In file included from include/linux/hardirq.h:11: In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1: In file included from include/asm-generic/hardirq.h:17: In file included from include/linux/irq.h:20: In file included from include/linux/io.h:13: In file included from arch/hexagon/include/asm/io.h:328: include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 584 | __raw_writeb(value, PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 594 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr); | ~~~~~~~~~~ ^ include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 604 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr); | ~~~~~~~~~~ ^ In file included from sound/pci/hda/patch_realtek.c:17: In file included from include/linux/pci.h:2693: In file included from include/linux/dma-mapping.h:11: In file included from include/linux/scatterlist.h:8: In file included from include/linux/mm.h:2208: include/linux/vmstat.h:522:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion] 522 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_" | ~~~~~~~~~~~ ^ ~~~ >> sound/pci/hda/patch_realtek.c:7222:8: error: no member named 'power_hook' in 'struct alc_spec' 7222 | spec->power_hook = alc287_s4_power_gpio3_default; | ~~~~ ^ 7 warnings and 1 error generated. vim +7222 sound/pci/hda/patch_realtek.c 7214 7215 static void alc287_fixup_lenovo_thinkpad_with_alc1318(struct hda_codec *codec, 7216 const struct hda_fixup *fix, int action) 7217 { 7218 struct alc_spec *spec = codec->spec; 7219 7220 if (action != HDA_FIXUP_ACT_PRE_PROBE) 7221 return; > 7222 spec->power_hook = alc287_s4_power_gpio3_default; 7223 spec->gen.pcm_playback_hook = alc287_alc1318_playback_pcm_hook; 7224 } 7225 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0