- Alsa-devel - mailman.alsa-project.org

[PATCH 0/3] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
by Artur Weber 07 May '24

07 May '24

Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons). In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]). This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0. A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well. Signed-off-by: Artur Weber <aweber.kernel(a)gmail.com> [1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm899… --- Artur Weber (3): ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection .../bindings/sound/samsung,midas-audio.yaml | 30 +++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 23 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 265 ++++++++++++++++++++- 4 files changed, 305 insertions(+), 15 deletions(-) --- base-commit: e67572cd2204894179d89bd7b984072f19313b03 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc Best regards, -- Artur Weber <aweber.kernel(a)gmail.com>

2 8

[PATCH v2] ASoC: Intel: avs: boards: Properly name input device
by Amadeusz Sławiński 07 May '24

07 May '24

Machine boards expose input device for use with userspace. Current name in some cases is incorrect, fix it. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- v2: - Rebase on top of correct tree. --- sound/soc/intel/avs/boards/es8336.c | 2 +- sound/soc/intel/avs/boards/nau8825.c | 2 +- sound/soc/intel/avs/boards/rt274.c | 3 ++- sound/soc/intel/avs/boards/rt286.c | 4 ++-- sound/soc/intel/avs/boards/rt298.c | 4 ++-- 5 files changed, 8 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/avs/boards/es8336.c b/sound/soc/intel/avs/boards/es8336.c index ff3bd15132694..f4919a6abc278 100644 --- a/sound/soc/intel/avs/boards/es8336.c +++ b/sound/soc/intel/avs/boards/es8336.c @@ -113,7 +113,7 @@ static int avs_es8336_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, &data->jack, pins, num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c index 3164745b15167..eef718c6b8ad9 100644 --- a/sound/soc/intel/avs/boards/nau8825.c +++ b/sound/soc/intel/avs/boards/nau8825.c @@ -96,7 +96,7 @@ static int avs_nau8825_codec_init(struct snd_soc_pcm_runtime *runtime) * 4 buttons here map to the google Reference headset. * The use of these buttons can be decided by the user space. */ - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0 | + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3, jack, pins, num_pins); if (ret) diff --git a/sound/soc/intel/avs/boards/rt274.c b/sound/soc/intel/avs/boards/rt274.c index e3aa28780df5a..51ebc790c6b4d 100644 --- a/sound/soc/intel/avs/boards/rt274.c +++ b/sound/soc/intel/avs/boards/rt274.c @@ -102,7 +102,8 @@ static int avs_rt274_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET, jack, pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET, jack, pins, + num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/rt286.c b/sound/soc/intel/avs/boards/rt286.c index d24316fc4db9c..67fd362962c40 100644 --- a/sound/soc/intel/avs/boards/rt286.c +++ b/sound/soc/intel/avs/boards/rt286.c @@ -63,8 +63,8 @@ static int avs_rt286_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, jack, - pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, + jack, pins, num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/rt298.c b/sound/soc/intel/avs/boards/rt298.c index 7fd28544f7869..1003e8689eacc 100644 --- a/sound/soc/intel/avs/boards/rt298.c +++ b/sound/soc/intel/avs/boards/rt298.c @@ -74,8 +74,8 @@ static int avs_rt298_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, jack, - pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, + jack, pins, num_pins); if (ret) return ret; -- 2.34.1

2 1

[PATCH 0/4] ASoC: use 'time_left' instead of 'timeout' with wait_for_*() functions
by Wolfram Sang 07 May '24

07 May '24

There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_*() functions causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code obvious and self explaining. This is part of a tree-wide series. The rest of the patches can be found here (some parts may still be WIP): git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left Because these patches are generated, I audit them before sending. This is why I will send series step by step. Build bot is happy with these patches, though. No functional changes intended. Wolfram Sang (4): ASoC: codecs: wm8962: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8993: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8994: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8996: use 'time_left' variable with wait_for_completion_timeout() sound/soc/codecs/wm8962.c | 12 ++++++------ sound/soc/codecs/wm8993.c | 12 ++++++------ sound/soc/codecs/wm8994.c | 8 ++++---- sound/soc/codecs/wm8996.c | 14 +++++++------- 4 files changed, 23 insertions(+), 23 deletions(-) -- 2.43.0

3 6

[PATCH 00/13] ASoC: Use snd_soc_substream_to_rtd() for accessing private_data
by Krzysztof Kozlowski 07 May '24

07 May '24

Hi, Do not open-code snd_soc_substream_to_rtd() when accessing snd_pcm_substream->private_data. This makes code more consistent with rest of ASoC and allows in the future to move the field to any other place or add additional checks in snd_soc_substream_to_rtd(). Best regards, Krzysztof --- Krzysztof Kozlowski (13): ASoC: qcom: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: tegra: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: ti: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: arm: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: amd: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: fsl: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: img: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: kirkwood: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: loongson: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: mediatek: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: meson: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: samsung: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: sunxi: Use snd_soc_substream_to_rtd() for accessing private_data sound/arm/pxa2xx-pcm-lib.c | 4 ++-- sound/soc/amd/acp/acp-mach-common.c | 2 +- sound/soc/amd/acp3x-rt5682-max9836.c | 2 +- sound/soc/amd/ps/ps-sdw-dma.c | 2 +- sound/soc/fsl/fsl-asoc-card.c | 2 +- sound/soc/fsl/imx-card.c | 6 +++--- sound/soc/fsl/imx-hdmi.c | 2 +- sound/soc/fsl/imx-pcm-rpmsg.c | 6 +++--- sound/soc/img/img-i2s-in.c | 2 +- sound/soc/img/img-i2s-out.c | 2 +- sound/soc/kirkwood/kirkwood-dma.c | 2 +- sound/soc/loongson/loongson_card.c | 2 +- sound/soc/loongson/loongson_dma.c | 2 +- sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 4 ++-- sound/soc/mediatek/mt8186/mt8186-afe-pcm.c | 14 +++++++------- sound/soc/mediatek/mt8186/mt8186-mt6366.c | 2 +- sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 8 ++++---- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 6 +++--- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 10 +++++----- sound/soc/mediatek/mt8195/mt8195-mt6359.c | 4 ++-- sound/soc/meson/aiu-fifo.c | 2 +- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/qcom/apq8016_sbc.c | 4 ++-- sound/soc/qcom/qdsp6/q6apm-dai.c | 2 +- sound/soc/qcom/sc7180.c | 10 +++++----- sound/soc/qcom/sc7280.c | 12 ++++++------ sound/soc/qcom/sc8280xp.c | 8 ++++---- sound/soc/qcom/sdw.c | 8 ++++---- sound/soc/qcom/sm8250.c | 10 +++++----- sound/soc/qcom/x1e80100.c | 8 ++++---- sound/soc/samsung/midas_wm1811.c | 2 +- sound/soc/sunxi/sun50i-dmic.c | 2 +- sound/soc/tegra/tegra_asoc_machine.c | 2 +- sound/soc/tegra/tegra_pcm.c | 6 +++--- sound/soc/ti/omap-hdmi.c | 2 +- 35 files changed, 82 insertions(+), 82 deletions(-) --- base-commit: 82415cf72c7e224be7a6496f3a53c0b365c2fe9d change-id: 20240430-asoc-snd-substream-clean-924b717d8f54 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

3 15

[PATCH] ASoC: qcom: audioreach: Correct mapping of back speakers
by Krzysztof Kozlowski 07 May '24

07 May '24

Qualcomm DSP, according to downstream sources, expects back speakers to be mapped as "back", not "surround". The surround is used only for 8+ speakers configuration. Reported-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Fixes: 3c5fcb20e07e ("ASoC: qcom: audioreach: Add 4 channel support") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/qdsp6/audioreach.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c index 5291deac0a0b..c655f0213723 100644 --- a/sound/soc/qcom/qdsp6/audioreach.c +++ b/sound/soc/qcom/qdsp6/audioreach.c @@ -277,8 +277,8 @@ static void audioreach_set_channel_mapping(u8 *ch_map, int num_channels) } else if (num_channels == 4) { ch_map[0] = PCM_CHANNEL_FL; ch_map[1] = PCM_CHANNEL_FR; - ch_map[2] = PCM_CHANNEL_LS; - ch_map[3] = PCM_CHANNEL_RS; + ch_map[2] = PCM_CHANNEL_LB; + ch_map[3] = PCM_CHANNEL_RB; } } @@ -851,8 +851,8 @@ static int audioreach_mfc_set_media_format(struct q6apm_graph *graph, } else if (num_channels == 4) { media_format->channel_mapping[0] = PCM_CHANNEL_FL; media_format->channel_mapping[1] = PCM_CHANNEL_FR; - media_format->channel_mapping[2] = PCM_CHANNEL_LS; - media_format->channel_mapping[3] = PCM_CHANNEL_RS; + media_format->channel_mapping[2] = PCM_CHANNEL_LB; + media_format->channel_mapping[3] = PCM_CHANNEL_RB; } rc = q6apm_send_cmd_sync(graph->apm, pkt, 0); -- 2.43.0

1 1

[PATCH v3 0/7] ASoC: codecs: wcd937x: add wcd937x audio codec support
by Mohammad Rafi Shaik 07 May '24

07 May '24

This patchset adds support for Qualcomm WCD9370/WCD9375 codec. Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC connected over SoundWire. This device has two SoundWire devices, RX and TX respectively supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH, 6 DMICs and MBHC. For codec driver to be functional it would need both tx and rx Soundwire devices to be up and this is taken care by using device component framework and device-links are used to ensure proper pm dependencies. Ex tx does not enter suspend before rx or codec is suspended. This patchset along with other SoundWire patches on the list have been tested on QCM6490 IDP device. Changes since v2: - Used common qcom,wcd93xx-common.yaml. removed duplicate properties. - Merged bindings patches "v2-0001" and "v2-0003" in single patch for easy review. - Fixed dt binding check errors. - Added missing "qcom,wcd9375-codec" in v3-0001 dt binding patch. - Added constraints on values in v3-0001 binding patch as suggested by Krzysztof - Fix the typo mistake in v2 cover letter Changes since v1: - Split the patch per driver for easier review as suggested by Krzysztof - Used devm_gpiod_get api to get reset gpio as suggested by Krzysztof Prasad Kumpatla (7): ASoC: dt-bindings: document wcd937x Audio Codec ASoC: codecs: wcd937x: add wcd937x codec driver ASoC: codecs: wcd937x-sdw: add SoundWire driver ASoC: codecs: wcd937x: add basic controls ASoC: codecs: wcd937x: add playback dapm widgets ASoC: codecs: wcd937x: add capture dapm widgets ASoC: codecs: wcd937x: add audio routing and Kconfig .../bindings/sound/qcom,wcd937x-sdw.yaml | 78 + .../bindings/sound/qcom,wcd937x.yaml | 58 + sound/soc/codecs/Kconfig | 20 + sound/soc/codecs/Makefile | 7 + sound/soc/codecs/wcd937x-sdw.c | 1147 +++++++ sound/soc/codecs/wcd937x.c | 3036 +++++++++++++++++ sound/soc/codecs/wcd937x.h | 653 ++++ 7 files changed, 4999 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml create mode 100644 sound/soc/codecs/wcd937x-sdw.c create mode 100644 sound/soc/codecs/wcd937x.c create mode 100644 sound/soc/codecs/wcd937x.h base-commit: 5e4f84f18c4ee9b0ccdc19e39b7de41df21699dd -- 2.25.1

4 13

[PATCH v1] slimbus: qcom-ngd-ctrl: Add stream disable support
by Viken Dadhaniya 07 May '24

07 May '24

Currently slimbus driver doesn't support stream disable callback, it only supports stream enable callback. In slimbus usecase, client is switching to new frequency with same channel and calling enable stream callback for new frequency but DSP subsystem is crashing as we are switching to new frequency with same channel without disabling stream for older frequency. Ideally, before switching to another frequency, client should call disable stream callback and then enable stream for newer frequency. Hence add support to disable stream via qcom_slim_ngd_disable_stream(). Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 70 +++++++++++++++++++++++++++++++++ drivers/slimbus/slimbus.h | 13 ++++++ 2 files changed, 83 insertions(+) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index e0b21f0f79c1..d952827d2e12 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2011-2017, The Linux Foundation. All rights reserved. // Copyright (c) 2018, Linaro Limited +// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. #include <linux/irq.h> #include <linux/kernel.h> @@ -1084,6 +1085,74 @@ static int qcom_slim_ngd_enable_stream(struct slim_stream_runtime *rt) return ret; } +static int qcom_slim_ngd_disable_stream(struct slim_stream_runtime *rt) +{ + struct slim_device *sdev = rt->dev; + struct slim_controller *ctrl = sdev->ctrl; + struct slim_val_inf msg = {0}; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + struct slim_msg_txn txn = {0,}; + int i, ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + txn.msg = &msg; + txn.msg->num_bytes = 0; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + for (i = 0; i < rt->num_ports; i++) { + struct slim_port *port = &rt->ports[i]; + + if (txn.msg->num_bytes == 0) { + wbuf[txn.msg->num_bytes++] = (u8)(SLIM_CH_REMOVE << 6) + | (sdev->laddr & 0x1f); + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(&sdev->dev, "Fail to allocate TID\n"); + return -ENXIO; + } + wbuf[txn.msg->num_bytes++] = txn.tid; + } + wbuf[txn.msg->num_bytes++] = port->ch.id; + } + + txn.mc = SLIM_USR_MC_CHAN_CTRL; + txn.rl = txn.msg->num_bytes + 4; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + return ret; + } + + txn.mc = SLIM_USR_MC_RECONFIG_NOW; + txn.msg->num_bytes = 2; + wbuf[1] = sdev->laddr; + txn.rl = txn.msg->num_bytes + 4; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(ctrl->dev, "Fail to allocate TID ret:%d\n", ret); + return ret; + } + + wbuf[0] = txn.tid; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + } + + return ret; +} + static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl, struct slim_eaddr *ea, u8 *laddr) { @@ -1642,6 +1711,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR; ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr; ctrl->ctrl.enable_stream = qcom_slim_ngd_enable_stream; + ctrl->ctrl.disable_stream = qcom_slim_ngd_disable_stream; ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg; ctrl->ctrl.wakeup = NULL; ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 00a7f112574b..21543d125614 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011-2017, The Linux Foundation + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _DRIVERS_SLIMBUS_H @@ -316,6 +317,18 @@ enum slim_transport_protocol { SLIM_PROTO_EXT_HALF_DUP, }; +/* + * enum slim_ch_control: Channel control. + * Activate will schedule channel and/or group of channels in the TDM frame. + * Suspend will keep the schedule but data-transfer won't happen. + * Remove will remove the channel/group from the TDM frame. + */ +enum slim_ch_control { + SLIM_CH_ACTIVATE, + SLIM_CH_SUSPEND, + SLIM_CH_REMOVE, +}; + /** * struct slim_stream_runtime - SLIMbus stream runtime instance * -- 2.17.1

2 1

[PATCH] [RFC PATCH] ALSA: usb-audio: endpoint: Prevent NULL pointer deference in snd_usb_endpoint_close
by Rajashekar kuruva 07 May '24

07 May '24

When multiple plug-in and plug-out events occur, there is a risk of encountering a NULL pointer dereference leading to a kernel panic during a headset use-case. this issue arises in the snd_usb_endpoint_close function To avoid check if ep->iface_ref is not null before decrementing its opened count. If ep->iface_ref is null, we skip the decrement and the subsequent logic. Signed-off-by: Rajashekar kuruva <quic_kuruva(a)quicinc.com> --- sound/usb/endpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 8f65349a06d3..0e3101b7e392 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -950,7 +950,7 @@ void snd_usb_endpoint_close(struct snd_usb_audio *chip, usb_audio_dbg(chip, "Closing EP 0x%x (count %d)\n", ep->ep_num, ep->opened); - if (!--ep->iface_ref->opened && + if (ep->iface_ref && !--ep->iface_ref->opened && !(chip->quirk_flags & QUIRK_FLAG_IFACE_SKIP_CLOSE)) endpoint_set_interface(chip, ep, false); -- 2.25.1

3 9

[PATCH] ASoC: qcom: q6apm-dai: drop unused 'q6apm_dai_rtd' fields
by Krzysztof Kozlowski 07 May '24

07 May '24

Remove few unused fields from 'struct q6apm_dai_rtd'. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/qdsp6/q6apm-dai.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c index 00bbd291be5c..cee23d4bda6f 100644 --- a/sound/soc/qcom/qdsp6/q6apm-dai.c +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c @@ -70,14 +70,10 @@ struct q6apm_dai_rtd { unsigned int bytes_received; unsigned int copied_total; uint16_t bits_per_sample; - uint16_t source; /* Encoding source bit mask */ - uint16_t session_id; bool next_track; enum stream_state state; struct q6apm_graph *graph; spinlock_t lock; - uint32_t initial_samples_drop; - uint32_t trailing_samples_drop; bool notify_on_drain; }; @@ -720,14 +716,12 @@ static int q6apm_dai_compr_set_metadata(struct snd_soc_component *component, switch (metadata->key) { case SNDRV_COMPRESS_ENCODER_PADDING: - prtd->trailing_samples_drop = metadata->value[0]; q6apm_remove_trailing_silence(component->dev, prtd->graph, - prtd->trailing_samples_drop); + metadata->value[0]); break; case SNDRV_COMPRESS_ENCODER_DELAY: - prtd->initial_samples_drop = metadata->value[0]; q6apm_remove_initial_silence(component->dev, prtd->graph, - prtd->initial_samples_drop); + metadata->value[0]); break; default: ret = -EINVAL; -- 2.43.0

2 1

[PATCH v2] ASoC: tas2781: Fix a warning reported by robot kernel test
by Shenghao Ding 07 May '24

07 May '24

Fix a warning reported by robot kernel test that 'fw_entry' in function 'tas2781_load_calibration' is used uninitialized with compiler sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the comments. Fixes: ef3bcde75d06 ("ASoc: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Describe more what was actually an issue reported by robot kernel test. - Correct the subject suffix, ALSA: ASoc/tas2781 --> ASoC: tas2781. v1: - Update the copyright year to 2024 - tasdevice-fmw.c --> tas2781-fmwlib.c - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405021200.YHInjV43-lkp@intel.com/ --- sound/soc/codecs/tas2781-fmwlib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 45760fe19523..a6be81adcb83 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // -// tasdevice-fmw.c -- TASDEVICE firmware support +// tas2781-fmwlib.c -- TASDEVICE firmware support // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -1878,7 +1878,7 @@ int tas2781_load_calibration(void *context, char *file_name, { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *)context; struct tasdevice *tasdev = &(tas_priv->tasdevice[i]); - const struct firmware *fw_entry; + const struct firmware *fw_entry = NULL; struct tasdevice_fw *tas_fmw; struct firmware fmw; int offset = 0; -- 2.34.1

3 2