- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH2/5] ASoC S3C24xx machine drivers - Openmoko Neo1973
by Liam Girdwood 11 May '07

11 May '07

From: Graeme Gregory <gg(a)opensource.wolfsonmicro.com> This patch adds ALSA support for the Openmoko Neo1973 phone. Features:- * HiFi Playback and capture. * Phone calls supported. * Support for BT PCM in WM8753 voice interface. * Support for LM4857 audio amp. Signed-off-by: Graeme Gregory <gg(a)opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com> Privacy & Confidentiality Notice ------------------------------------------------- This message and any attachments contain privileged and confidential information that is intended solely for the person(s) to whom it is addressed. If you are not an intended recipient you must not: read; copy; distribute; discuss; take any action in or make any reliance upon the contents of this message; nor open or read any attachment. If you have received this message in error, please notify us as soon as possible on the following telephone number and destroy this message including any attachments. Thank you. ------------------------------------------------- Wolfson Microelectronics plc Tel: +44 (0)131 272 7000 Fax: +44 (0)131 272 7001 Web: www.wolfsonmicro.com Registered in Scotland Company number SC089839 Registered office: Westfield House, 26 Westfield Road, Edinburgh, EH11 2QB, UK

3 2

[alsa-devel] [PATCH] ASoC AC97 device reg bugfix
by Liam Girdwood 11 May '07

11 May '07

This patch fixes a bug whereby AC97 bus device data was being clobbered when AC97 codecs using the generic ac97_codec.c driver were being registered. Codecs that didn't use the generic driver were unaffected (e.g. WM9712, WM9713). Changes:- o Add new AC97 codec class for custom (or need bus dev registration) AC97 codecs. o Only register/deregister this custom codec device with the AC97 bus. The generic AC97 driver already does this for generic codec devices. This may be related to bug #3038 :- https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3038 Manuel, can you try this on SH & Au1x00. Thanks Liam

3 3

Re: [alsa-devel] Can someone verify support for "AzTech Sound Galaxy Nova 16 Extra II-3D - using AZT-2316/R Chipset - FCC-ID:I38-MMSN846" ?
by ramkromberg＠mail.com 11 May '07

11 May '07

Well, it didn't take long so here's the results : "sudo modprobe snd-sb8 port=0x220 irq=5 dma8=1" gave no errors, and "lsmod" later gave: Module Size Used by snd_sb8 9216 0 snd_sb8_dsp 12288 1 snd_sb8 snd_sb_common 17792 2 snd_sb8,snd_sb8_dsp snd_opl3_lib 11520 1 snd_sb8 snd_hwdep 9988 1 snd_opl3_lib snd_pcm_oss 44544 0 snd_pcm 79876 3 snd_sb8,snd_sb8_dsp,snd_pcm_oss snd_mixer_oss 17408 1 snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 32896 0 snd_seq_midi 9600 0 snd_rawmidi 25472 2 snd_sb8_dsp,snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23684 3 snd_opl3_lib,snd_pcm,snd_seq snd_seq_device 9100 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 54020 13 snd_sb8,snd_sb8_dsp,snd_sb_common,snd_opl3_lib,snd_hwdep,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8672 1 snd snd_page_alloc 10888 1 snd_pcm nfs 240876 0 nfsd 218992 17 exportfs 6912 1 nfsd lockd 64904 3 nfs,nfsd sunrpc 161340 12 nfs,nfsd,lockd apm 22752 1 ppdev 10116 0 cpufreq_stats 7360 0 cpufreq_ondemand 9228 0 cpufreq_powersave 2688 0 freq_table 5792 2 cpufreq_stats,cpufreq_ondemand cpufreq_conservative 8200 0 cpufreq_userspace 5408 0 nls_iso8859_1 5120 1 nls_cp437 6784 1 vfat 14208 1 fat 53916 1 vfat ext2 66824 1 lp 12452 0 parport_pc 36388 1 parport 36936 3 ppdev,lp,parport_pc pcspkr 4224 0 ipv6 268704 8 tsdev 8768 0 evdev 11008 1 ext3 133128 1 jbd 59816 1 ext3 mbcache 9604 2 ext2,ext3 8139too 27648 0 ide_cd 32672 0 cdrom 37664 1 ide_cd ide_disk 17024 5 floppy 59524 0 ehci_hcd 34188 0 8139cp 25088 0 mii 6528 2 8139too,8139cp uhci_hcd 25360 0 usbcore 134280 3 ehci_hcd,uhci_hcd piix 10756 0 [permanent] generic 5124 0 [permanent] ata_generic 9092 0 libata 125720 1 ata_generic scsi_mod 142348 1 libata fbcon 42656 0 tileblit 3584 1 fbcon font 9216 1 fbcon bitblit 6912 1 fbcon softcursor 3200 1 bitblit vesafb 9220 0 capability 5896 0 commoncap 8192 1 capability But when I try to play an ogg gxine crushes an xmms ignores, when trying an mp3 gxine again crushes and xmms gives the soundcard no configured error... Just a recap: I verifyed using dos the settings (hwset and volset - default and save), and used the bios to set "IRQ 5" as "ISA Legacy". I didn't use the jumper as I see no need since the epprom already does the job. So I'm stuck, What do you think I should do now ? Ram Kromberg ramkromberg(a)mail.com

2 1

[alsa-devel] detect extern/internel mic
by xinyun liu 10 May '07

10 May '07

It's interesting that when I plug in a headphone or an external microphone, the build in headphone and microphone will not work. Is it a driver feature or the hardware do it? Can anyone give some clue? I'd like to see the code but don't know how to start. Please give me help. Thx!

2 2

Re: [alsa-devel] Can't record sound on Aser Aspire 5100. ATI SB450, RelTek ALC 883
by xinyun liu 10 May '07

10 May '07

I have test all modes for alc883. The result is here: 0. 3stack-dig. both extern/internal can play, but can't record sound 1. 3stack-6ch-dig same with 3stack-dig 2. 3stack-6ch can play, but can't record sound. Can hear noise from the Mic. 3. 6stack-dig both can play sound, can't record sound 4. tarta-dig With alsamixer, can set to 2ch or 6ch, both can play sound, can't 5. tarta-2ch-dig both can play sound, can't record sound. 6. 6stack-dig-demo both can play sound, can't record sound. 7. aser both can play sound, can't record sound 8. medion can't play sound 9. laptop-eapd can play sound, but can't record sound 10. lenovo-101e both can play sound, can't record sound 11. auto both can play sound, and can record sound. But the sound quality is too bad to use from the internel Mic. After test it a while on switching the extern/internal Mic, the quality both droped. So I use lenovo-101e model, ( rebuild the driver, rmmod/insmod, use alsamixer to adjust the limits). Then I use auto mode, and the sound record work again from external Mic. After I switch to internel Mic, the quality droped again. Do you have any idea about it? Thx! 2007/4/30, Ustun ERGENOGLU <ustun.ergenoglu(a)gmail.com>: > I have a Fujitsu Siemens Amilo pa1510, with the same sound hardware, > and the same problem. I have posted some messages here, made a bug > report but no answer came :( i'm going hopeless. > > 2007/4/29, xinyun liu <xinyunliu.osc(a)gmail.com>: > > I know it's the system bios does not set the pin configuration right. > > But I don't know how to try out a correct model. > > > > Can anyone help to give some hints to fix it? > > > > > > Regards, > > Xinyun > > > > > > 2007/4/29, xinyun liu <xinyunliu.osc(a)gmail.com>: > > > hi, > > > I have an Acer Aspire 5100. I can play sound but with the build in > > > mic, I can't record sound. The driver is the latest HG code. > > > http://pastebin.ca/464406 > > > > > > [root@localhost ~]# lspci -nnv -d1002:437b > > > 00:14.2 0403: 1002:437b (rev 01) > > > Subsystem: 1025:009f > > > Flags: bus master, slow devsel, latency 64, IRQ 19 > > > Memory at c0000000 (64-bit, non-prefetchable) [size=16K] > > > Capabilities: [50] Power Management version 2 > > > Capabilities: [60] Message Signalled Interrupts: 64bit+ > > > Queue=0/0 Enable- > > > > > > > > > [root@localhost ~]# dmesg | fgrep ALSA > /tmp/1 > > > [root@localhost ~]# vi /tmp/1 > > > ALSA ~/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:698: > > > codec_mask = 0xb > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:1820: hda_codec: model 'acer' > > > is selected for config 1025:0 (Acer laptop) > > > ALSA ~/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:698: > > > codec_mask = 0xb > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:1820: hda_codec: model 'acer' > > > is selected for config 1025:0 (Acer laptop) > > > ALSA ~/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1188: > > > azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x2, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x4, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x3, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x5, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x2, stream=0x0, channel=0, format=0x0 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x4, stream=0x0, channel=0, format=0x0 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x3, stream=0x0, channel=0, format=0x0 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x5, stream=0x0, channel=0, format=0x0 > > > ALSA ~/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1188: > > > azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x8, stream=0x1, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x8, stream=0x0, channel=0, format=0x0 > > > ALSA ~/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1188: > > > azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x2, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x4, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x3, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x5, stream=0x5, channel=0, format=0x11 > > > ALSA ~/alsa-driver/pci/hda/hda_codec.c:630: hda_codec_setup_stream: > > > NID=0x2, stream=0x0, channel=0, format=0x0 > > > > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel(a)alsa-project.org > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > >

1 1

[alsa-devel] alsa-driver-1.0.14rc3 won't compile with kernel 2.6.20.3 when Processor family is Core2
by Chris Pemberton 10 May '07

10 May '07

Laptop has Pentium Dual Core and Intel HD Audio Kernel is 2.6.20.3 compiled for Processor family Core2. In-kernel alsa drivers are 1.0.14rc3 (cat /proc/asound/version) and compile ok. In-kernel drivers do not work for this sound card. Downloaded 1.0.14rc3 and applied patch_realtek.c ./configure --prefix=/usr --with-cards=hda-intel "make" gives the following error: make[1]: Entering directory `/usr/src/linux-2.6.20.3' > /usr/src/linux-2.6.20.3/Makefile:491: > /usr/src/linux-2.6.20.3/arch//Makefile: No such file or directory If the kernel is compiled with Processor family = Pentium M, the external alsa drivers compile clean and the soundcard works. So, Processor family = Core2 cannot be selected when using external alsa-driver-1.0.14rc3. Chris Pemberton

2 5

[alsa-devel] Problem with ALSA Capture and Playback : start_delay
by Nobin Mathew 10 May '07

10 May '07

Why start_delay=1 for capture and start_delay=0 for playback what this means I have one app which does both capture and playback, but when i tried to read ALSA buffer(capture) periodically it gives ALSa buffer overflow error. what my app does is read from ALSA (capture mic) and write to ALSA(playback). In this case for both Capture and Playback setting i am using start_delay = 0. But if i am giving some delay between Read and Write no overflow error happens Any idea why this happens Thanks

1 0

Re: [alsa-devel] Can someone verify support for "AzTech Sound Galaxy Nova 16 Extra II-3D - using AZT-2316/R Chipset - FCC-ID:I38-MMSN846" ?
by ramkromberg＠mail.com 10 May '07

10 May '07

I already installed dos + the drivers and ubuntu, So I'll try working with that. As far as I can tell from the win95 driver name, the "AzTech Sound Galaxy Nova 16 Extra II-3D - using AZT-2316/R Chipset - FCC-ID:I38-MMSN846" is full-duplex : In : http://www.aztech.com/support_download_soundcard01.html : 2316FD95.ZIP 90,526 Windows 95 Full Duplex Audio Driver Version 4.8.0 Build 1128 I will try working with the software first, then probably either the epprom or the jumper (since I have dos + drivers working I'm tempted to try the epprom first ;-) ) I can't at the moment compile in that machine (My poor little xubuntu is barely working as it is, I don't even dare installing samba let alone a dev-env of any sorts..., maybe when I'll get everything working I'll install slackware, I decided gentoo is not a good idea ;-) ) so I won't be testing your drivers any time soon :-( , I do however hope you'll submit your drivers cause a non PnP driver can't hurt and waiting for confirms on such old hw will be point-less... When I'll have results I'll let you know... Also, I'm CCing the mailing list now as pair request... Thanks Rene, Ram Kromberg ramkromberg(a)mail.com

1 0

[alsa-devel] [PATCH] snd-aoa-i2sbus: use MODULE_DEVICE_TABLE instead of plain MODULE_ALIAS
by Johannes Berg 10 May '07

10 May '07

This patch changes snd-aoa-i2sbus to use MODULE_DEVICE_TABLE instead of a hardcoded MODULE_ALIAS. Thanks to Sylvain Munaut for pointing this out. Signed-off-by: Johannes Berg <johannes(a)sipsolutions.net> --- Please apply to the alsa tree. sound/aoa/soundbus/i2sbus/i2sbus-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- wireless-dev.orig/sound/aoa/soundbus/i2sbus/i2sbus-core.c 2007-03-28 13:08:25.903457795 +0200 +++ wireless-dev/sound/aoa/soundbus/i2sbus/i2sbus-core.c 2007-03-28 13:09:21.253457795 +0200 @@ -23,9 +23,6 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Johannes Berg <johannes(a)sipsolutions.net>"); MODULE_DESCRIPTION("Apple Soundbus: I2S support"); -/* for auto-loading, declare that we handle this weird - * string that macio puts into the relevant device */ -MODULE_ALIAS("of:Ni2sTi2sC"); static int force; module_param(force, int, 0444); @@ -37,6 +34,8 @@ static struct of_device_id i2sbus_match[ { } }; +MODULE_DEVICE_TABLE(of, i2sbus_match); + static int alloc_dbdma_descriptor_ring(struct i2sbus_dev *i2sdev, struct dbdma_command_mem *r, int numcmds)

2 6

[alsa-devel] [PATCH] ASoC AC97 static GPL symbol fix
by Liam Girdwood 10 May '07

10 May '07

This patch fixes a bug whereby the GPL'ed symbol ac97_dai was being declared as static. Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

2 1