June 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: Intel: sst: Constify struct intel_sst_ops
by Christophe JAILLET 23 Jun '24

23 Jun '24

'struct intel_sst_ops' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 12250 1000 112 13362 3432 sound/soc/intel/atom/sst/sst.o After: ===== text data bss dec hex filename 12378 888 112 13378 3442 sound/soc/intel/atom/sst/sst.o Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- Compile tested-only --- sound/soc/intel/atom/sst/sst.c | 2 +- sound/soc/intel/atom/sst/sst.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/atom/sst/sst.c b/sound/soc/intel/atom/sst/sst.c index e0357d257c6c..ff03fde12151 100644 --- a/sound/soc/intel/atom/sst/sst.c +++ b/sound/soc/intel/atom/sst/sst.c @@ -158,7 +158,7 @@ static int sst_save_dsp_context_v2(struct intel_sst_drv *sst) } -static struct intel_sst_ops mrfld_ops = { +static const struct intel_sst_ops mrfld_ops = { .interrupt = intel_sst_interrupt_mrfld, .irq_thread = intel_sst_irq_thread_mrfld, .clear_interrupt = intel_sst_clear_intr_mrfld, diff --git a/sound/soc/intel/atom/sst/sst.h b/sound/soc/intel/atom/sst/sst.h index 126903e126e4..e0db7434543c 100644 --- a/sound/soc/intel/atom/sst/sst.h +++ b/sound/soc/intel/atom/sst/sst.h @@ -391,7 +391,7 @@ struct intel_sst_drv { unsigned int csr_value; void *fw_in_mem; struct sst_sg_list fw_sg_list, library_list; - struct intel_sst_ops *ops; + const struct intel_sst_ops *ops; struct sst_info info; struct pm_qos_request *qos; unsigned int use_dma; -- 2.45.2

1 0

[PATCH 0/8] iio: adc: dfsdm: add scaling support
by Olivier Moysan 23 Jun '24

23 Jun '24

The aim of this serie is to add scaling support to STM32 DFSDM peripheral in the analog context. The DFSDM currently operates as a consumer of IIO channels provided by a generic SD modulator. As previously discussed in RFC [1], this topology is not suitable for implementing scaling. This series brings the integration of the DFSDM driver with the new IIO backend framework [2], enabling the DFSDM IIO device to offer scaling feature based on reference voltage data obtained from the IIO SD modulator backend. This generic SD modulator backend takes the place of the former SD modulator, used with legacy implementation. The DFSDM driver has been updated to adopt the generic ADC channel binding [3]. The reasons for this include: - Reducing the use of proprietary properties - Simplifying the coexistence of legacy and new backend bindings - Prepare the support of the MDF peripheral on STM32MP25 SoC Backward compatibility is maintained through legacy support. This series extends the backend framework with the following APIs (which may need further refinement): - read_raw: This API is intented to retrieve the voltage information from the backend. It is based on IIO read_raw API, but maybe we need a more specialized API here. - iio_backend_disable / iio_backend_enable: backend enable/disable to be used for PM management - devm_iio_backend_subnode_get Intended for parsing DT subnodes to allow generic channel binding support, as generic channel DT nodes are not populated as devices. Ideally, a single API would be better, but I could not identify a suitable alternative that doesn't affect the existing API (devm_iio_backend_get). [1]: https://lore.kernel.org/lkml/20200204101008.11411-1-olivier.moysan@st.com/ [2]: https://lore.kernel.org/all/20240206-iio-backend-v9-0-df66d159c000@analog.c… [3]: devicetree/bindings/iio/adc/adc.yaml Olivier Moysan (8): iio: add read raw service to iio backend framework iio: add enable and disable services to iio backend framework iio: add child nodes support in iio backend framework dt-bindings: iio: dfsdm: move to backend framework dt-bindings: iio: add sigma delta modulator backend iio: adc: stm32-dfsdm: adopt generic channels bindings iio: add sd modulator generic iio backend iio: adc: stm32-dfsdm: add scaling support to dfsdm .../iio/adc/sd-modulator-backend.yaml | 43 +++ .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 158 ++++++++- drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/sd_adc_backend.c | 110 +++++++ drivers/iio/adc/stm32-dfsdm-adc.c | 302 +++++++++++++++--- drivers/iio/industrialio-backend.c | 90 +++++- include/linux/iio/backend.h | 7 + 8 files changed, 664 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/sd-modulator-backend.yaml create mode 100644 drivers/iio/adc/sd_adc_backend.c base-commit: 7db8a847f98caae68c70bdab9ba92d1af38e5656 -- 2.25.1

4 5

[PATCH 1/8] ASoC: amd: acp: add a null check for chip_pdev structure
by Vijendar Mukunda 23 Jun '24

23 Jun '24

When acp platform device creation is skipped, chip->chip_pdev value will remain NULL. Add NULL check for chip->chip_pdev structure in snd_acp_resume() function to avoid null pointer dereference. Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/acp/acp-pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/acp/acp-pci.c b/sound/soc/amd/acp/acp-pci.c index ad320b29e87d..aa3e72d13451 100644 --- a/sound/soc/amd/acp/acp-pci.c +++ b/sound/soc/amd/acp/acp-pci.c @@ -199,10 +199,12 @@ static int __maybe_unused snd_acp_resume(struct device *dev) ret = acp_init(chip); if (ret) dev_err(dev, "ACP init failed\n"); - child = chip->chip_pdev->dev; - adata = dev_get_drvdata(&child); - if (adata) - acp_enable_interrupts(adata); + if (chip->chip_pdev) { + child = chip->chip_pdev->dev; + adata = dev_get_drvdata(&child); + if (adata) + acp_enable_interrupts(adata); + } return ret; } -- 2.34.1

2 9

[PATCH 0/2] ASoC: add compatible for ti,pcm5242
by Christian Hewitt 22 Jun '24

22 Jun '24

Update bindings and add a driver compatible for the pcm5242 chip used on the Odroid HiFi-Shield2 i2c mezzanine board. Christian Hewitt (2): dt-bindings: sound: add ti,pcm5424 to pcm512x ASoC: Add support for ti,pcm5242 to the pcm512x driver Documentation/devicetree/bindings/sound/pcm512x.txt | 2 +- sound/soc/codecs/pcm512x-i2c.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) -- 2.34.1

2 5

[PATCH v2] ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s
by Shenghao Ding 22 Jun '24

22 Jun '24

Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s. name_prefix is not mandatory. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Add name_prefix as name prefix of calibration data file. v1: - Changed the copyright year to 2024 in tas2781-comlib.c. - Correct the filename in the header comments of tas2781-comlib.c, remove the wrong file name. - Add name_prefix as name of firmwares and kcontrol. --- include/sound/tas2781.h | 1 + sound/soc/codecs/tas2781-comlib.c | 13 +++++++++---- sound/soc/codecs/tas2781-i2c.c | 20 ++++++++++++++++---- 3 files changed, 26 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 99ca3e401fd1..cd8ce522b78e 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -108,6 +108,7 @@ struct tasdevice_priv { unsigned char coef_binaryname[64]; unsigned char rca_binaryname[64]; unsigned char dev_name[32]; + const char *name_prefix; unsigned char ndev; unsigned int magic_num; unsigned int chip_id; diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 3aa81514dad7..6db1a260da82 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // -// tas2781-lib.c -- TAS2781 Common functions for HDA and ASoC Audio drivers +// TAS2781 Common functions for HDA and ASoC Audio drivers // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -277,8 +277,13 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, */ mutex_lock(&tas_priv->codec_lock); - scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", - tas_priv->dev_name, tas_priv->ndev); + if (tas_priv->name_prefix) + scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin", + tas_priv->name_prefix, tas_priv->dev_name, + tas_priv->ndev); + else + scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->ndev); crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); tas_priv->codec = codec; ret = request_firmware_nowait(module, FW_ACTION_UEVENT, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index c64d458e524e..cc765d45c6b5 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -394,8 +394,12 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * failing to load DSP firmware is NOT an error. */ tas_priv->fw_state = TASDEVICE_RCA_FW_OK; - scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", - tas_priv->dev_name); + if (tas_priv->name_prefix) + scnprintf(tas_priv->rca_binaryname, 64, "%s-%s_coef.bin", + tas_priv->name_prefix, tas_priv->dev_name); + else + scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", + tas_priv->dev_name); ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", @@ -418,8 +422,15 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * calibrated data inside algo. */ for (i = 0; i < tas_priv->ndev; i++) { - scnprintf(tas_priv->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", - tas_priv->dev_name, tas_priv->tasdevice[i].dev_addr); + if (tas_priv->name_prefix) + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s-%s_cal_0x%02x.bin", tas_priv->name_prefix, + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + else + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s_cal_0x%02x.bin", tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); ret = tas2781_load_calibration(tas_priv, tas_priv->cal_binaryname[i], i); if (ret != 0) @@ -579,6 +590,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + tas_priv->name_prefix = codec->name_prefix; return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); } -- 2.34.1

1 0

[PATCH] ASoC: dt-bindings: add missing vender prefix on filename
by Kuninori Morimoto 21 Jun '24

21 Jun '24

Many Sound yaml files doesn't have vender prefix on filename. Add missing vender prefix for these files. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- .../bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} | 2 +- .../bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} | 2 +- .../bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} | 2 +- .../bindings/sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} | 2 +- .../bindings/sound/{zl38060.yaml => mscc,zl38060.yaml} | 2 +- .../bindings/sound/{rt1019.yaml => realtek,rt1019.yaml} | 2 +- .../devicetree/bindings/sound/{tas2562.yaml => ti,tas2562.yaml} | 2 +- .../devicetree/bindings/sound/{tas2770.yaml => ti,tas2770.yaml} | 2 +- .../devicetree/bindings/sound/{tas27xx.yaml => ti,tas27xx.yaml} | 2 +- .../bindings/sound/{tas5805m.yaml => ti,tas5805m.yaml} | 2 +- .../sound/{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} | 2 +- .../devicetree/bindings/sound/{wm8750.yaml => wlf,wm8750.yaml} | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) rename Documentation/devicetree/bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} (94%) rename Documentation/devicetree/bindings/sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} (97%) rename Documentation/devicetree/bindings/sound/{zl38060.yaml => mscc,zl38060.yaml} (96%) rename Documentation/devicetree/bindings/sound/{rt1019.yaml => realtek,rt1019.yaml} (90%) rename Documentation/devicetree/bindings/sound/{tas2562.yaml => ti,tas2562.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas2770.yaml => ti,tas2770.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas27xx.yaml => ti,tas27xx.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas5805m.yaml => ti,tas5805m.yaml} (95%) rename Documentation/devicetree/bindings/sound/{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} (99%) rename Documentation/devicetree/bindings/sound/{wm8750.yaml => wlf,wm8750.yaml} (92%) diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4375.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml index 587598e122c6..bc07fcba535b 100644 --- a/Documentation/devicetree/bindings/sound/ak4375.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4375.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4375.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4375 DAC and headphones amplifier diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4613.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml index 75e13414d6eb..b49a6cff9f1f 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4613.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4613.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4613 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4642.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml index 437fe5d7cae1..fc03f0373a1a 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4642.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4642.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4642 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/sgtl5000.yaml rename to Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml index 1353c051488f..c6ab1ca16763 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/sgtl5000.yaml# +$id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale SGTL5000 Stereo Codec diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml similarity index 96% rename from Documentation/devicetree/bindings/sound/zl38060.yaml rename to Documentation/devicetree/bindings/sound/mscc,zl38060.yaml index 8bd201e573aa..994313fd12b2 100644 --- a/Documentation/devicetree/bindings/sound/zl38060.yaml +++ b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/zl38060.yaml# +$id: http://devicetree.org/schemas/sound/mscc,zl38060.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ZL38060 Connected Home Audio Processor from Microsemi. diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml similarity index 90% rename from Documentation/devicetree/bindings/sound/rt1019.yaml rename to Documentation/devicetree/bindings/sound/realtek,rt1019.yaml index 3d5a91a942f4..adf5e38f4dbc 100644 --- a/Documentation/devicetree/bindings/sound/rt1019.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/rt1019.yaml# +$id: http://devicetree.org/schemas/sound/realtek,rt1019.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: RT1019 Mono Class-D Audio Amplifier diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas2562.yaml rename to Documentation/devicetree/bindings/sound/ti,tas2562.yaml index d28c102c0ce7..8bc3b0c7531e 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2562.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas2770.yaml rename to Documentation/devicetree/bindings/sound/ti,tas2770.yaml index be2536e8c440..362c2e6154f0 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2770.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas27xx.yaml rename to Documentation/devicetree/bindings/sound/ti,tas27xx.yaml index f2d878f6f495..530bc3937847 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas27xx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml similarity index 95% rename from Documentation/devicetree/bindings/sound/tas5805m.yaml rename to Documentation/devicetree/bindings/sound/ti,tas5805m.yaml index 12c41974274e..c2c2835a9e1d 100644 --- a/Documentation/devicetree/bindings/sound/tas5805m.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas5805m.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas5805m.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TAS5805M audio amplifier diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml similarity index 99% rename from Documentation/devicetree/bindings/sound/tlv320adcx140.yaml rename to Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml index f3274bcc4c05..876fa97bfbcd 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$id: http://devicetree.org/schemas/sound/ti,tlv320adcx140.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml similarity index 92% rename from Documentation/devicetree/bindings/sound/wm8750.yaml rename to Documentation/devicetree/bindings/sound/wlf,wm8750.yaml index 24246ac7bbdf..96859e38315b 100644 --- a/Documentation/devicetree/bindings/sound/wm8750.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/wm8750.yaml# +$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8750 and WM8987 audio CODECs -- 2.43.0

4 3

[PATCH] soundwire: bus: simplify by using local slave->prop
by Krzysztof Kozlowski 21 Jun '24

21 Jun '24

The sdw_initialize_slave() function stores 'slave->prop' as local 'prop' variable, so use it in all applicable places to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/bus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 191e6cc6f962..263ca32f0c5c 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1410,7 +1410,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) } } if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) && - !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { + !(prop->quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { /* Clear parity interrupt before enabling interrupt mask */ status = sdw_read_no_pm(slave, SDW_SCP_INT1); if (status < 0) { @@ -1436,7 +1436,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) * device-dependent, it might e.g. only be enabled in * steady-state after a couple of frames. */ - val = slave->prop.scp_int1_mask; + val = prop->scp_int1_mask; /* Enable SCP interrupts */ ret = sdw_update_no_pm(slave, SDW_SCP_INTMASK1, val, val); @@ -1447,7 +1447,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) } /* No need to continue if DP0 is not present */ - if (!slave->prop.dp0_prop) + if (!prop->dp0_prop) return 0; /* Enable DP0 interrupts */ -- 2.43.0

3 2

Re: (subset) [PATCHv5 0/9] ASoC: fsl-asoc-card: add S/PDIF controller
by Mark Brown 21 Jun '24

21 Jun '24

On Thu, 20 Jun 2024 15:25:02 +0200, Elinor Montmasson wrote: > This is the v5 of the series of patches aiming to make the machine > driver `fsl-asoc-card` compatible with S/PDIF controllers on imx boards. > The main goal is to allow the use of S/PDIF controllers with ASRC > modules. > > The `imx-spdif` machine driver already has specific support for S/PDIF > controllers but doesn't support using an ASRC with it. However, the > `fsl-asoc-card` machine driver has the necessary code to create a sound > card which can use an ASRC module. > It is then possible to extend the support for S/PDIF audio cards by > merging the `imx-spdif` driver into `fsl-asoc-card`. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/9] ASoC: fsl-asoc-card: set priv->pdev before using it commit: 90f3feb24172185f1832636264943e8b5e289245 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark

1 0

[PATCH v4 00/40] lib/find: add atomic find_bit() primitives
by Yury Norov 20 Jun '24

20 Jun '24

--- This v4 moves new API to separate headers, as adding stuff to find.h concerns people, particularly Linus. It also adds few more conversions alongside other cosmetic changes. See full changelog below. --- Add helpers around test_and_{set,clear}_bit() to allow searching for clear or set bits and flipping them atomically. Using atomic search primitives allows to implement lockless bitmap handling where only individual bits are touched by concurrent processes, and where people now have to protect their bitmaps to search for a free or set bit due to the lack of atomic searching routines. The typical lock-protected bit allocation may look like this: unsigned long alloc_bit() { unsigned long bit; spin_lock(bitmap_lock); bit = find_first_zero_bit(bitmap, nbits); if (bit < nbits) __set_bit(bit, bitmap); spin_unlock(bitmap_lock); return bit; } void free_bit(unsigned long bit) { spin_lock(bitmap_lock); __clear_bit(bit, bitmap); spin_unlock(bitmap_lock); } Now with atomic find_and_set_bit(), the above can be implemented lockless, directly by using it and atomic clear_bit(). Patches 36-40 do this in few places in the kernel where the transition is clear. There is likely more candidates for refactoring. The other important case is when people opencode atomic search or atomic traverse on the maps with the patterns looking like: for (idx = 0; idx < nbits; idx++) if (test_and_clear_bit(idx, bitmap)) do_something(idx); Or like this: do { bit = find_first_bit(bitmap, nbits); if (bit >= nbits) return nbits; } while (!test_and_clear_bit(bit, bitmap)); return bit; In both cases, the opencoded loop may be converted to a single function or iterator call. Correspondingly: for_each_test_and_clear_bit(idx, bitmap, nbits) do_something(idx); Or: return find_and_clear_bit(bitmap, nbits); Obviously, the less routine code people have to write themself, the less probability to make a mistake. The patch #33 fixes one such mistake. The new API is not only a handy helpers - it also resolves a non-trivial issue of using non-atomic find_bit() together with atomic test_and_{set,clear)_bit(). The trick is that find_bit() implies that the bitmap is a regular non-volatile piece of memory, and compiler is allowed to use such optimization techniques like re-fetching memory instead of caching it. For example, find_first_bit() is implemented like: for (idx = 0; idx * BITS_PER_LONG < sz; idx++) { val = addr[idx]; if (val) { sz = min(idx * BITS_PER_LONG + __ffs(val), sz); break; } } On register-memory architectures, like x86, compiler may decide to access memory twice - first time to compare against 0, and second time to fetch its value to pass it to __ffs(). When running find_first_bit() on volatile memory, the memory may get changed in-between, and for instance, it may lead to passing 0 to __ffs(), which is an undefined behaviour. This is a potentially dangerous call. find_and_clear_bit() as a wrapper around test_and_clear_bit() naturally treats underlying bitmap as a volatile memory and prevents compiler from such optimizations. Now that KCSAN is catching exactly this type of situations and warns on undercover memory modifications. We can use it to reveal improper usage of find_bit(), and convert it to atomic find_and_*_bit() as appropriate. In some cases concurrent operations with plain find_bit() are acceptable. For example: - two threads running find_*_bit(): safe wrt ffs(0) and returns correct value, because underlying bitmap is unchanged; - find_next_bit() in parallel with set or clear_bit(), when modifying a bit prior to the start bit to search: safe and correct; - find_first_bit() in parallel with set_bit(): safe, but may return wrong bit number; - find_first_zero_bit() in parallel with clear_bit(): same as above. In last 2 cases find_bit() may not return a correct bit number, but it may be OK if caller requires any (not exactly the first) set or clear bit, correspondingly. In such cases, KCSAN may be safely silenced with data_race(). But in most cases where KCSAN detects concurrency we should carefully review the code and likely protect critical sections or switch to atomic find_and_bit(), as appropriate. This patch adds the following atomic primitives: find_and_set_bit(addr, nbits); find_and_set_next_bit(addr, nbits, start); ... Here find_and_{set,clear} part refers to the corresponding test_and_{set,clear}_bit function. Suffixes like _wrap or _lock derive their semantics from corresponding find() or test() functions. For brevity, the naming omits the fact that we search for zero bit in find_and_set, and correspondingly search for set bit in find_and_clear functions. The patch also adds iterators with atomic semantics, like for_each_test_and_set_bit(). Here, the naming rule is to simply prefix corresponding atomic operation with 'for_each'. This series is not aimed on performance, but some performance implications are considered. In [1] Jan reported 2% slowdown in a single-thread search test when switching find_bit() function to treat bitmaps as volatile arrays. On the other hand, kernel robot in the same thread reported +3.7% to the performance of will-it-scale.per_thread_ops test. Assuming that our compilers are sane and generate better code against properly annotated data, the above discrepancy doesn't look weird. When running on non-volatile bitmaps, plain find_bit() outperforms atomic find_and_bit(), and vice-versa. So, all users of find_bit() API, where heavy concurrency is expected, are encouraged to switch to atomic find_and_bit() as appropriate. The 1st patch of this series adds atomic find_and_bit() API, 2nd adds a basic test for new API, and all the following patches spread it over the kernel. [1] https://lore.kernel.org/lkml/634f5fdf-e236-42cf-be8d-48a581c21660@alu.unizg… --- v1: https://lore.kernel.org/netdev/20231118155105.25678-29-yury.norov@gmail.com… v2: https://lore.kernel.org/all/20231204185101.ddmkvsr2xxsmoh2u@quack3/T/ v3: https://lore.kernel.org/linux-pci/ZX4bIisLzpW8c4WM@yury-ThinkPad/T/ v4: - drop patch v3-24: not needed after null_blk refactoring; - add patch 34: "MIPS: sgi-ip27: optimize alloc_level()"; - add patch 35: "uprobes: optimize xol_take_insn_slot()"; - add patches 36-40: get rid of locking scheme around bitmaps; - move new API to separate headers, to not bloat bitmap.h @ Linus; - patch #1: adjust comments to allow returning >= @size; - rebase the series on top of current master. Yury Norov (40): lib/find: add atomic find_bit() primitives lib/find: add test for atomic find_bit() ops lib/sbitmap; optimize __sbitmap_get_word() by using find_and_set_bit() watch_queue: optimize post_one_notification() by using find_and_clear_bit() sched: add cpumask_find_and_set() and use it in __mm_cid_get() mips: sgi-ip30: optimize heart_alloc_int() by using find_and_set_bit() sparc: optimize alloc_msi() by using find_and_set_bit() perf/arm: use atomic find_bit() API drivers/perf: optimize ali_drw_get_counter_idx() by using find_and_set_bit() dmaengine: idxd: optimize perfmon_assign_event() ath10k: optimize ath10k_snoc_napi_poll() wifi: rtw88: optimize the driver by using atomic iterator KVM: x86: hyper-v: optimize and cleanup kvm_hv_process_stimers() PCI: hv: Optimize hv_get_dom_num() by using find_and_set_bit() scsi: core: optimize scsi_evt_emit() by using an atomic iterator scsi: mpi3mr: optimize the driver by using find_and_set_bit() scsi: qedi: optimize qedi_get_task_idx() by using find_and_set_bit() powerpc: optimize arch code by using atomic find_bit() API iommu: optimize subsystem by using atomic find_bit() API media: radio-shark: optimize the driver by using atomic find_bit() API sfc: optimize the driver by using atomic find_bit() API tty: nozomi: optimize interrupt_handler() usb: cdc-acm: optimize acm_softint() RDMA/rtrs: optimize __rtrs_get_permit() by using find_and_set_bit_lock() mISDN: optimize get_free_devid() media: em28xx: cx231xx: optimize drivers by using find_and_set_bit() ethernet: rocker: optimize ofdpa_port_internal_vlan_id_get() bluetooth: optimize cmtp_alloc_block_id() net: smc: optimize smc_wr_tx_get_free_slot_index() ALSA: use atomic find_bit() functions where applicable m68k: optimize get_mmu_context() microblaze: optimize get_mmu_context() sh: mach-x3proto: optimize ilsel_enable() MIPS: sgi-ip27: optimize alloc_level() uprobes: optimize xol_take_insn_slot() scsi: sr: drop locking around SR index bitmap KVM: PPC: Book3s HV: drop locking around kvmppc_uvmem_bitmap wifi: mac80211: drop locking around ntp_fltr_bmap mailbox: bcm-flexrm: simplify locking scheme powerpc/xive: drop locking around IRQ map MAINTAINERS | 2 + arch/m68k/include/asm/mmu_context.h | 12 +- arch/microblaze/include/asm/mmu_context_mm.h | 12 +- arch/mips/sgi-ip27/ip27-irq.c | 13 +- arch/mips/sgi-ip30/ip30-irq.c | 13 +- arch/powerpc/kvm/book3s_hv_uvmem.c | 33 +- arch/powerpc/mm/book3s32/mmu_context.c | 11 +- arch/powerpc/platforms/pasemi/dma_lib.c | 46 +-- arch/powerpc/platforms/powernv/pci-sriov.c | 13 +- arch/powerpc/sysdev/xive/spapr.c | 34 +- arch/sh/boards/mach-x3proto/ilsel.c | 5 +- arch/sparc/kernel/pci_msi.c | 10 +- arch/x86/kvm/hyperv.c | 41 +-- drivers/dma/idxd/perfmon.c | 9 +- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 16 +- drivers/iommu/arm/arm-smmu/arm-smmu.h | 11 +- drivers/iommu/msm_iommu.c | 19 +- drivers/isdn/mISDN/core.c | 10 +- drivers/mailbox/bcm-flexrm-mailbox.c | 21 +- drivers/media/radio/radio-shark.c | 6 +- drivers/media/radio/radio-shark2.c | 6 +- drivers/media/usb/cx231xx/cx231xx-cards.c | 17 +- drivers/media/usb/em28xx/em28xx-cards.c | 38 +-- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 18 +- drivers/net/ethernet/rocker/rocker_ofdpa.c | 12 +- drivers/net/ethernet/sfc/rx_common.c | 5 +- drivers/net/ethernet/sfc/siena/rx_common.c | 5 +- drivers/net/ethernet/sfc/siena/siena_sriov.c | 15 +- drivers/net/wireless/ath/ath10k/snoc.c | 10 +- drivers/net/wireless/realtek/rtw88/pci.c | 6 +- drivers/net/wireless/realtek/rtw89/pci.c | 6 +- drivers/pci/controller/pci-hyperv.c | 8 +- drivers/perf/alibaba_uncore_drw_pmu.c | 11 +- drivers/perf/arm-cci.c | 25 +- drivers/perf/arm-ccn.c | 11 +- drivers/perf/arm_dmc620_pmu.c | 10 +- drivers/perf/arm_pmuv3.c | 9 +- drivers/scsi/mpi3mr/mpi3mr_os.c | 22 +- drivers/scsi/qedi/qedi_main.c | 10 +- drivers/scsi/scsi_lib.c | 8 +- drivers/scsi/sr.c | 15 +- drivers/tty/nozomi.c | 6 +- drivers/usb/class/cdc-acm.c | 6 +- include/linux/cpumask_atomic.h | 20 ++ include/linux/find.h | 4 - include/linux/find_atomic.h | 324 +++++++++++++++++++ kernel/events/uprobes.c | 15 +- kernel/sched/sched.h | 15 +- kernel/watch_queue.c | 7 +- lib/find_bit.c | 86 +++++ lib/sbitmap.c | 47 +-- lib/test_bitmap.c | 62 ++++ net/bluetooth/cmtp/core.c | 11 +- net/smc/smc_wr.c | 11 +- sound/pci/hda/hda_codec.c | 8 +- sound/usb/caiaq/audio.c | 14 +- 56 files changed, 747 insertions(+), 493 deletions(-) create mode 100644 include/linux/cpumask_atomic.h create mode 100644 include/linux/find_atomic.h -- 2.43.0

2 8

[PATCHv5 9/9] ARM: dts: imx6: update spdif sound card node properties
by Elinor Montmasson 20 Jun '24

20 Jun '24

Following merge of imx-spdif driver into fsl-asoc-card: * update properties to match those used by fsl-asoc-card. * S/PDIF in/out dummy codecs must now be declared explicitly, add and use them. These modifications were tested only on an imx8mn-evk board. Signed-off-by: Elinor Montmasson <elinor.montmasson(a)savoirfairelinux.com> --- arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 15 ++++++++++++--- arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi | 9 +++++++-- .../boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts | 9 +++++++-- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 9 +++++++-- 12 files changed, 104 insertions(+), 28 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 95b49fc83f7b..5c664c0f2169 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -127,12 +127,21 @@ simple-audio-card,codec { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index a7d5693c5ab7..8491d656ef17 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -111,12 +111,21 @@ simple-audio-card,codec { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 7c298d9aa21e..ea9a98887c7b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -90,11 +90,16 @@ sound-sgtl5000 { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index ea40623d12e5..6f4546c59d38 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -197,11 +197,20 @@ sound { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi index 3a46ade3b6bd..6aa6b152c3ae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi @@ -121,11 +121,16 @@ sound { mux-ext-port = <3>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index d3a7a6eeb8e0..07f15726f203 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -142,12 +142,21 @@ sound { ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 761566ae3cf5..28afa8a0188b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -100,12 +100,17 @@ v_usb1: regulator-v-usb1 { vin-supply = <&v_5v0>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; gpio-keys { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index a955c77cd499..67f2a007a592 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -140,12 +140,17 @@ sound_codec: simple-audio-card,codec { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 6656e2e762a1..48dfd8151150 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -143,12 +143,17 @@ sound-cs42888 { "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-sabreauto-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; backlight { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi index 38abb6b50f6c..5a4b9ced297a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi @@ -26,11 +26,16 @@ sound { mux-ext-port = <3>; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; reg_1p5v: regulator-1p5v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts index b0c27b9b0244..d2cc8b4e8b00 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts @@ -97,11 +97,16 @@ sound-cs42888 { "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 7d4170c27732..a8c1fc02eddb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -183,12 +183,17 @@ panel_in: endpoint { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + sound-spdif { compatible = "fsl,imx6sx-sdb-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; -- 2.34.1

1 0