June 2024 - Alsa-devel - mailman.alsa-project.org

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16

[alsa-devel] Error patching file pcm_native.c
by Delusion's Master 20 Nov '24

20 Nov '24

Hi, first of all I apologize in case you receive multiple copies of this message, but I forgot to specify a subject in the original mail. I have a problem compiling the latest alsa driver snapshots. Specifically, it's a problem when patching pcm_native.c: [..] copying file alsa-kernel/core/info.c patching file info.c copying file alsa-kernel/core/pcm.c patching file pcm.c Hunk #3 succeeded at 739 (offset 2 lines). Hunk #5 succeeded at 954 (offset 2 lines). Hunk #7 succeeded at 1045 (offset 2 lines). copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #4 succeeded at 1544 (offset -25 lines). Hunk #5 succeeded at 2827 (offset 12 lines). Hunk #6 succeeded at 2878 (offset 10 lines). Hunk #7 FAILED at 2906. Hunk #8 FAILED at 2922. Hunk #9 succeeded at 2915 (offset -23 lines). Hunk #10 succeeded at 3036 (offset 10 lines). Hunk #11 succeeded at 3027 (offset -23 lines). Hunk #12 succeeded at 3074 (offset 10 lines). Hunk #13 succeeded at 3098 (offset -23 lines). Hunk #14 succeeded at 3143 (offset 10 lines). Hunk #15 succeeded at 3124 (offset -23 lines). Hunk #16 succeeded at 3214 (offset 10 lines). Hunk #17 succeeded at 3208 (offset -23 lines). Hunk #18 succeeded at 3271 (offset 10 lines). Hunk #19 succeeded at 3304 (offset -23 lines). Hunk #20 succeeded at 3386 (offset 10 lines). Hunk #21 succeeded at 3411 (offset -23 lines). Hunk #22 succeeded at 3456 (offset 10 lines). Hunk #23 succeeded at 3450 (offset -23 lines). Hunk #24 succeeded at 3525 (offset 10 lines). Hunk #25 succeeded at 3644 (offset -23 lines). 2 out of 25 hunks FAILED -- saving rejects to file pcm_native.c.rej make[2]: *** [pcm_native.c] Error 1 It's some days I get this, but I waited to report this since I thought it could be a temporary problem. My OS is Fedora 11 x86_64. Previous snapshots didn't give me this problem, but I can't say which one broke the compilation, since I usually try updated snapshots only at kernel updates. I searched for this error and the only relevant report I could find is this one: http://mailman.alsa-project.org/pipermail/alsa-devel/2009-April/016420.html a report from last April. What could the problem be? Thanks _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

3 10

ALSA 1.2.8 release
by Jaroslav Kysela 12 Nov '24

12 Nov '24

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

1 5

[alsa-devel] [RFC PATCH 00/10] Add support for DMA and audio codec of F1C100s
by Mesih Kilinc 23 Oct '24

23 Oct '24

This is RFC patchset for Allwinner suniv F1C100s to support DMA and audio codec. Allwinner F1C100s has a audio codec that has necessary digital and analog parts. It has r-l headphone output and microphone, line, r-l FM inputs. ADC can capture any inputs and also output channels via mux. Any input channels or DAC samples can feed output channels. Add support for this audio codec. F1C100s utilizes DMA channels to send and receive ADC-DAC samples. So DMA support needed. Patch 1~5 adds support for DMA. Suniv F1C100s has very similar DMA to sun4i. But there is some dissimilarities also. Suniv features a DMA reset bit in clock control unit. It has smaller number of DMA channels. Several registers has different addresses. It's max burst size is 4 instead of 8. Also DMA endpoint numbers are different. Patch 6 adds DMA max burst option to sun4i-codec. Patch 7~8 Add support for suniv F1C100s audio codec. Patch 9 adds audio codec to suniv-f1c100s.dtsi Patch 10 adds audio codec support to Lichee Pi Nano board. Thanks! Mesih Kilinc (10): dma-engine: sun4i: Add a quirk to support different chips dma-engine: sun4i: Add has_reset option to quirk dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA dma-engine: sun4i: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for DMA ASoC: sun4i-codec: Add DMA Max Burst field dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec ASoC: sun4i-codec: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano .../devicetree/bindings/dma/sun4i-dma.txt | 4 +- .../devicetree/bindings/sound/sun4i-codec.txt | 5 + arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 8 + arch/arm/boot/dts/suniv-f1c100s.dtsi | 25 ++ drivers/dma/Kconfig | 4 +- drivers/dma/sun4i-dma.c | 221 ++++++++++-- sound/soc/sunxi/sun4i-codec.c | 371 ++++++++++++++++++++- 7 files changed, 601 insertions(+), 37 deletions(-) -- 2.7.4

5 17

[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it
by Geraldo Nascimento 14 Sep '24

14 Sep '24

Hi Mark, resending this as it failed to apply in my last submission. Added Neil Armstrong to Cc: as hopefully he will be able to better review this. Thanks, Geraldo Nascimento --- Starting with version 2.10a of Synopsys DesignWare HDMI controller the insert_pcuv bit was introduced. On RK3399pro SoM (Radxa Rock Pi N10), for example, if we neglect to set this bit and proceed to enable hdmi_sound and i2s2 on the device tree there will be extreme clipping of sound output, to the point that music sounds like white noise. Problem could also manifest as just mild cracking depending of HDMI audio implementation of sink. Setting insert_pcuv bit (bit 2 of aud_conf2 Audio Sample register) fixes this. Signed-off-by: Geraldo Nascimento <geraldogabriel(a)gmail.com> --- v1->v2: SoC->SoM on description, better commenting, minor style changes, conditional application of fix for L-PCM only --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c @@ -42,6 +42,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, struct dw_hdmi *hdmi = audio->hdmi; u8 conf0 = 0; u8 conf1 = 0; + u8 conf2 = 0; u8 inputclkfs = 0; /* it cares I2S only */ @@ -101,6 +102,28 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, return -EINVAL; } + /* + * dw-hdmi introduced insert_pcuv bit in + * version 2.10a. + * + * This single bit (bit 2 of HDMI_AUD_CONF2) + * when set to 1 will enable the insertion of the PCUV + * (Parity, Channel Status, User bit and Validity) + * bits on the incoming audio stream. + * + * Support is limited to Linear PCM audio. If + * neglected, the lack of valid PCUV bits + * on L-PCM streams will cause anything from + * mild cracking to full blown extreme + * clipping depending on the HDMI audio + * implementation of the sink. + * + */ + + if (hdmi_read(audio, HDMI_DESIGN_ID) >= 0x21 && + !(hparms->iec.status[0] & IEC958_AES0_NONAUDIO)) + conf2 = HDMI_AUD_CONF2_INSERT_PCUV; + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); dw_hdmi_set_channel_status(hdmi, hparms->iec.status); dw_hdmi_set_channel_count(hdmi, hparms->channels); @@ -109,6 +120,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + hdmi_write(audio, conf2, HDMI_AUD_CONF2); return 0; } --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h @@ -931,6 +931,11 @@ enum { HDMI_AUD_CONF1_WIDTH_16 = 0x10, HDMI_AUD_CONF1_WIDTH_24 = 0x18, +/* AUD_CONF2 field values */ + HDMI_AUD_CONF2_HBR = 0x01, + HDMI_AUD_CONF2_NLPCM = 0x02, + HDMI_AUD_CONF2_INSERT_PCUV = 0x04, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,

3 3

[Patch v5 00/12] Add audio support for LPC32XX CPUs
by Piotr Wojtaszczyk 11 Sep '24

11 Sep '24

This pach set is to bring back audio to machines with a LPC32XX CPU. The legacy LPC32XX SoC used to have audio spport in linux 2.6.27. The support was dropped due to lack of interest from mainaeners. Piotr Wojtaszczyk (12): dt-bindings: dma: pl08x: Add dma-cells description dt-bindings: dma: Add lpc32xx DMA mux binding ASoC: dt-bindings: lpc32xx: Add lpc32xx i2s DT binding ARM: dts: lpc32xx: Use simple-mfd for clock control block ARM: dts: lpc32xx: Add missing dma properties ARM: dts: lpc32xx: Add missing i2s properties clk: lpc32xx: initialize regmap using parent syscon dmaengine: Add dma router for pl08x in LPC32XX SoC ARM: lpc32xx: Remove pl08x platform data in favor for device tree mtd: rawnand: lpx32xx: Request DMA channels using DT entries ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs i2x: pnx: Fix potential deadlock warning from del_timer_sync() call in isr .../devicetree/bindings/dma/arm-pl08x.yaml | 7 + .../bindings/dma/nxp,lpc3220-dmamux.yaml | 49 +++ .../bindings/sound/nxp,lpc3220-i2s.yaml | 73 ++++ MAINTAINERS | 20 + arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 53 ++- arch/arm/mach-lpc32xx/phy3250.c | 54 --- drivers/clk/Kconfig | 1 + drivers/clk/nxp/clk-lpc32xx.c | 26 +- drivers/dma/Kconfig | 9 + drivers/dma/Makefile | 1 + drivers/dma/lpc32xx-dmamux.c | 195 +++++++++ drivers/i2c/busses/i2c-pnx.c | 48 +-- drivers/mtd/nand/raw/lpc32xx_mlc.c | 26 +- drivers/mtd/nand/raw/lpc32xx_slc.c | 26 +- sound/soc/fsl/Kconfig | 7 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/lpc3xxx-i2s.c | 375 ++++++++++++++++++ sound/soc/fsl/lpc3xxx-i2s.h | 79 ++++ sound/soc/fsl/lpc3xxx-pcm.c | 72 ++++ 19 files changed, 993 insertions(+), 130 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml create mode 100644 Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml create mode 100644 drivers/dma/lpc32xx-dmamux.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c -- 2.25.1

7 19

[PATCH 00/18] ASoC: Intel: boards: updates for 6.11
by Pierre-Louis Bossart 28 Aug '24

28 Aug '24

More simplifications from Brent Lu for Chromebooks, Bard Liao for SoundWire, and support for new Dell SKUs w/ Cirrus Logic codecs added by Charles Keepax. Bard Liao (7): ASoC: Intel: sof_sdw_cs42l42: use dai parameter ASoC: Intel: sof_sdw_rt711: use dai parameter ASoC: Intel: sof_sdw_rt5682: use dai parameter ASoC: Intel: sof_sdw_rt700: use dai parameter ASoC: Intel: sof_sdw_rt_dmic: use from dai parameter ASoC: Intel: sof_sdw_rt_sdca_jack_common: use dai parameter ASoC: Intel: sof_sdw: remove get_codec_dai_by_name Brent Lu (7): ASoC: SOF: sof-audio: rename dai clock setting query function ASoC: SOF: sof-audio: add sof_dai_get_tdm_slots function ASoC: SOF: ipc3-topology: support tdm slot number query ASoC: SOF: ipc4-topology: support tdm slot number query ASoC: Intel: maxim-common: rewrite max_98373_hw_params function ASoC: Intel: sof_da7219: remove local max98373 ops ASoC: Intel: sof_da7219: disable max98373 speaker pins in late_probe Charles Keepax (4): ASoC: Intel: sof_sdw: Add missing controls for cs42l43/cs35l56 ASoC: Intel: soc-acpi: Add match entries for some cs42l43 laptops ASoC: Intel: sof_sdw: Add quirks for some new Dell laptops ASoC: Intel: sof_sdw: Add quirks from some new Dell laptops include/sound/sof.h | 1 + sound/soc/intel/boards/sof_board_helpers.h | 2 - sound/soc/intel/boards/sof_da7219.c | 57 ++------ sound/soc/intel/boards/sof_maxim_common.c | 84 ++++++++++-- sound/soc/intel/boards/sof_sdw.c | 128 +++++++++++++++--- sound/soc/intel/boards/sof_sdw_common.h | 4 - sound/soc/intel/boards/sof_sdw_cs42l42.c | 11 +- sound/soc/intel/boards/sof_sdw_rt5682.c | 11 +- sound/soc/intel/boards/sof_sdw_rt700.c | 11 +- sound/soc/intel/boards/sof_sdw_rt711.c | 11 +- sound/soc/intel/boards/sof_sdw_rt_dmic.c | 14 +- .../boards/sof_sdw_rt_sdca_jack_common.c | 11 +- .../intel/common/soc-acpi-intel-arl-match.c | 50 +++++++ .../intel/common/soc-acpi-intel-rpl-match.c | 50 +++++++ sound/soc/sof/ipc3-topology.c | 14 +- sound/soc/sof/ipc4-topology.c | 14 +- sound/soc/sof/sof-audio.c | 20 ++- sound/soc/sof/sof-audio.h | 9 +- 18 files changed, 338 insertions(+), 164 deletions(-) -- 2.43.0

4 21

[PATCH v6 0/4] ASoC: grace time for DPCM cleanup
by Kuninori Morimoto 28 Aug '24

28 Aug '24

Hi Mark, Pierre-Louis, Jerome Cc each ASoC driver maintainer This is resend of v6 of DPCM cleanup As we discussed in [1], we don't need to use dpcm_playback/capture flag, so we remove it. But we have been using it for 10 years, some driver might get damage. The most likely case is that the device/driver can use both playback/capture, but have only one flag, and not using xxx_only flag. [1/3] patch indicates warning in such case. These adds grace time for DPCM cleanup. I'm not sure when dpcm_xxx will be removed, and Codec check bypass will be error, but maybe v6.12 or v6.13 ? Please check each driver by that time. Previous patch-set try to check both CPU and Codec in DPCM, but we noticed that there are some special DAI which we can't handle today [2]. So I will escape it in this patch-set. [1] https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com [2] https://lore.kernel.org/all/3e67d62d-fe08-4f55-ab5b-ece8a57154f9@linux.inte… Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87wmo6dyxg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87msole5wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871q5tnuok.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87bk4oqerx.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/8734pctmte.wl-kuninori.morimoto.gx@renesas.com v5 -> v6 - based on latest ASoC branch v4 -> v5 - typo fix: limition -> limitation - typo fix: catpure -> capture - include Intel patch v3 -> v4 - don't check Codec on DPCM - include Jerome's dpcm_xxx update patch v2 -> v3 - tidyup typo (reuqsts -> requests) - add Tested-by on git-log v1 -> v2 - tidyup Codec check warning output condition Jerome Brunet (1): ASoC: amlogic: do not use dpcm_playback/capture flags Kuninori Morimoto (2): ASoC: soc-pcm: Indicate warning if dpcm_playback/capture were used for availability limition ASoC: remove snd_soc_dai_link_set_capabilities() Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw: use playback/capture_only flags include/sound/soc-dai.h | 1 - include/sound/soc.h | 1 + sound/soc/fsl/imx-card.c | 3 -- sound/soc/generic/audio-graph-card.c | 2 - sound/soc/generic/audio-graph-card2.c | 2 - sound/soc/generic/simple-card.c | 2 - sound/soc/intel/boards/sof_sdw.c | 4 +- sound/soc/meson/axg-card.c | 11 +++-- sound/soc/meson/gx-card.c | 1 - sound/soc/meson/meson-card-utils.c | 4 +- sound/soc/qcom/common.c | 1 - sound/soc/soc-dai.c | 38 ---------------- sound/soc/soc-pcm.c | 65 +++++++++++++++------------ 13 files changed, 47 insertions(+), 88 deletions(-) -- 2.43.0

2 5