May 2023 - Alsa-devel - mailman.alsa-project.org

[RESEND PATCH 0/2] Improve support for sof_ipc{3|4}_bytes_ext_put
by Daniel Baluta 16 May '23

16 May '23

From: Daniel Baluta <daniel.baluta(a)nxp.com> This patch series provides better handling of cases where sending a data blob to FW results in a validation error. In this case we restore to the last good known value instead of keeping the data that firwmare rejected. Paul Olaru (2): ASoC: sof: Improve sof_ipc3_bytes_ext_put function ASoC: sof: Improve sof_ipc4_bytes_ext_put function sound/soc/sof/ipc3-control.c | 54 ++++++++++++++++++++++++++++++++---- sound/soc/sof/ipc4-control.c | 39 +++++++++++++++++++++++--- sound/soc/sof/sof-audio.h | 1 + 3 files changed, 84 insertions(+), 10 deletions(-) -- 2.25.1

2 3

[PATCH v2] ASoC: dt-bindings: nau8824: Convert to dtschema
by David Lin 16 May '23

16 May '23

Convert the NAU8824 audio CODEC bindings to DT schema. Signed-off-by: David Lin <CTLIN0(a)nuvoton.com> --- Change: V1 -> V2: - Correct the maximun and maxItems from 4 to 8 for sar-threshold-num and sar-threshold, respectively. .../devicetree/bindings/sound/nau8824.txt | 88 --------- .../bindings/sound/nuvoton,nau8824.yaml | 182 ++++++++++++++++++ 2 files changed, 182 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nau8824.txt create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml diff --git a/Documentation/devicetree/bindings/sound/nau8824.txt b/Documentation/devicetree/bindings/sound/nau8824.txt deleted file mode 100644 index e0058b97e49a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8824.txt +++ /dev/null @@ -1,88 +0,0 @@ -Nuvoton NAU8824 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8824" - - - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). - -Optional properties: - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-threshold-num: Number of buttons supported - - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as - SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) - where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. - Refer datasheet section 10.2 for more information about threshold calculation. - - - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. - - - nuvoton,sar-voltage: Reference voltage for button impedance measurement. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-compare-time: SAR compare time - 0 - 500 ns - 1 - 1 us - 2 - 2 us - 3 - 4 us - - - nuvoton,sar-sampling-time: SAR sampling time - 0 - 2 us - 1 - 4 us - 2 - 8 us - 3 - 16 us - - - nuvoton,short-key-debounce: Button short key press debounce time. - 0 - 30 ms - 1 - 50 ms - 2 - 100 ms - - - nuvoton,jack-eject-debounce: Jack ejection debounce time. - 0 - 0 ms - 1 - 1 ms - 2 - 10 ms - - -Example: - - headset: nau8824@1a { - compatible = "nuvoton,nau8824"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - // Setup 4 buttons impedance according to Android specification - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; - nuvoton,sar-hysteresis = <0>; - nuvoton,sar-voltage = <6>; - nuvoton,sar-compare-time = <1>; - nuvoton,sar-sampling-time = <1>; - nuvoton,short-key-debounce = <0>; - nuvoton,jack-eject-debounce = <1>; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml new file mode 100644 index 000000000000..3dbf438c3841 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8824 audio CODEC + +maintainers: + - John Hsu <KCHSU0(a)nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8824 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-polarity: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + JKDET pin polarity. + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF Impedance selection. + enum: + - 0 # Open + - 1 # 25 kOhm + - 2 # 125 kOhm + - 3 # 2.5 kOhm + default: 2 + + nuvoton,micbias-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Micbias voltage level. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-threshold-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of buttons supported. + minimum: 1 + maximum: 8 + default: 4 + + nuvoton,sar-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Impedance threshold for each button. Array that contains up to 8 buttons + configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is + configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by + 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold + calculation. + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 255 + + nuvoton,sar-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button impedance measurement hysteresis. + default: 0 + + nuvoton,sar-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Reference voltage for button impedance measurement. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-compare-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR compare time. + enum: + - 0 # 500ns + - 1 # 1us + - 2 # 2us + - 3 # 4us + default: 1 + + nuvoton,sar-sampling-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR sampling time. + enum: + - 0 # 2us + - 1 # 4us + - 2 # 8us + - 3 # 16us + default: 1 + + nuvoton,short-key-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button short key press debounce time. + enum: + - 0 # 30 ms + - 1 # 50 ms + - 2 # 100 ms + default: 0 + + nuvoton,jack-eject-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Jack ejection debounce time. + enum: + - 0 # 0 ms + - 1 # 1 ms + - 2 # 10 ms + default: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8824"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,sar-threshold-num = <4>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <0>; + nuvoton,sar-voltage = <6>; + nuvoton,sar-compare-time = <1>; + nuvoton,sar-sampling-time = <1>; + nuvoton,short-key-debounce = <0>; + nuvoton,jack-eject-debounce = <1>; + }; + }; -- 2.25.1

3 2

[PATCH v4 30/41] sound: add HAS_IOPORT dependencies
by Niklas Schnelle 16 May '23

16 May '23

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd(a)kernel.org> Signed-off-by: Arnd Bergmann <arnd(a)kernel.org> Signed-off-by: Niklas Schnelle <schnelle(a)linux.ibm.com> --- Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so per-subsystem patches may be applied independently sound/drivers/Kconfig | 3 +++ sound/isa/Kconfig | 1 + sound/pci/Kconfig | 45 ++++++++++++++++++++++++++++++++----------- sound/pcmcia/Kconfig | 1 + 4 files changed, 39 insertions(+), 11 deletions(-) diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index be3009746f3a..864991d8776d 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -128,6 +128,7 @@ config SND_VIRMIDI config SND_MTPAV tristate "MOTU MidiTimePiece AV multiport MIDI" + depends on HAS_IOPORT select SND_RAWMIDI help To use a MOTU MidiTimePiece AV multiport MIDI adapter @@ -152,6 +153,7 @@ config SND_MTS64 config SND_SERIAL_U16550 tristate "UART16550 serial MIDI driver" + depends on HAS_IOPORT select SND_RAWMIDI help To include support for MIDI serial port interfaces, say Y here @@ -185,6 +187,7 @@ config SND_SERIAL_GENERIC config SND_MPU401 tristate "Generic MPU-401 UART driver" + depends on HAS_IOPORT select SND_MPU401_UART help Say Y here to include support for MIDI ports compatible with diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 6ffa48dd5983..f8159179e38d 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -23,6 +23,7 @@ menuconfig SND_ISA bool "ISA sound devices" depends on ISA || COMPILE_TEST depends on ISA_DMA_API + depends on HAS_IOPORT default y help Support for sound devices connected via the ISA bus. diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 861958451ef5..787868c9e91b 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -26,7 +26,7 @@ config SND_ALS300 select SND_PCM select SND_AC97_CODEC select SND_OPL3_LIB - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+ @@ -36,6 +36,7 @@ config SND_ALS300 config SND_ALS4000 tristate "Avance Logic ALS4000" depends on ISA_DMA_API + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -51,7 +52,7 @@ config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for the integrated AC97 sound device on motherboards using the ALi M5451 Audio Controller @@ -96,6 +97,7 @@ config SND_ATIIXP_MODEM config SND_AU8810 tristate "Aureal Advantage" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -110,6 +112,7 @@ config SND_AU8810 config SND_AU8820 tristate "Aureal Vortex" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -123,6 +126,7 @@ config SND_AU8820 config SND_AU8830 tristate "Aureal Vortex 2" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -157,7 +161,7 @@ config SND_AZT3328 select SND_RAWMIDI select SND_AC97_CODEC select SND_TIMER - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for Aztech AZF3328 (PCI168) soundcards. @@ -193,6 +197,7 @@ config SND_BT87X_OVERCLOCK config SND_CA0106 tristate "SB Audigy LS / Live 24bit" + depends on HAS_IOPORT select SND_AC97_CODEC select SND_RAWMIDI select SND_VMASTER @@ -205,6 +210,7 @@ config SND_CA0106 config SND_CMIPCI tristate "C-Media 8338, 8738, 8768, 8770" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -221,6 +227,7 @@ config SND_OXYGEN_LIB config SND_OXYGEN tristate "C-Media 8786, 8787, 8788 (Oxygen)" + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -246,6 +253,7 @@ config SND_OXYGEN config SND_CS4281 tristate "Cirrus Logic (Sound Fusion) CS4281" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_RAWMIDI select SND_AC97_CODEC @@ -257,6 +265,7 @@ config SND_CS4281 config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC select FW_LOADER @@ -290,6 +299,7 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" depends on X86_32 || MIPS || COMPILE_TEST + depends on HAS_IOPORT select SND_PCM select SND_AC97_CODEC help @@ -307,6 +317,7 @@ config SND_CS5535AUDIO config SND_CTXFI tristate "Creative Sound Blaster X-Fi" + depends on HAS_IOPORT select SND_PCM help If you want to use soundcards based on Creative Sound Blastr X-Fi @@ -468,7 +479,7 @@ config SND_EMU10K1 select SND_AC97_CODEC select SND_TIMER select SND_SEQ_DEVICE if SND_SEQUENCER != n - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y to include support for Sound Blaster PCI 512, Live!, Audigy and E-MU APS/0404/1010/1212/1616/1820 soundcards. @@ -491,7 +502,7 @@ config SND_EMU10K1X tristate "Emu10k1X (Dell OEM Version)" select SND_AC97_CODEC select SND_RAWMIDI - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for the Dell OEM version of the Sound Blaster Live!. @@ -501,6 +512,7 @@ config SND_EMU10K1X config SND_ENS1370 tristate "(Creative) Ensoniq AudioPCI 1370" + depends on HAS_IOPORT select SND_RAWMIDI select SND_PCM help @@ -511,6 +523,7 @@ config SND_ENS1370 config SND_ENS1371 tristate "(Creative) Ensoniq AudioPCI 1371/1373" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC help @@ -525,7 +538,7 @@ config SND_ES1938 select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Solo-1 (ES1938, ES1946, ES1969) chips. @@ -537,7 +550,7 @@ config SND_ES1968 tristate "ESS ES1968/1978 (Maestro-1/2/2E)" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Maestro 1/2/2E chips. @@ -569,6 +582,7 @@ config SND_ES1968_RADIO config SND_FM801 tristate "ForteMedia FM801" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC @@ -624,7 +638,7 @@ config SND_ICE1712 select SND_MPU401_UART select SND_AC97_CODEC select BITREVERSE - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on the ICE1712 (Envy24) chip. @@ -640,6 +654,7 @@ config SND_ICE1712 config SND_ICE1724 tristate "ICE/VT1724/1720 (Envy24HT/PT)" + depends on HAS_IOPORT select SND_RAWMIDI select SND_AC97_CODEC select SND_VMASTER @@ -712,7 +727,7 @@ config SND_LX6464ES config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on ESS Maestro 3 (Allegro) chips. @@ -753,6 +768,7 @@ config SND_NM256 config SND_PCXHR tristate "Digigram PCXHR" + depends on HAS_IOPORT select FW_LOADER select SND_PCM select SND_HWDEP @@ -764,6 +780,7 @@ config SND_PCXHR config SND_RIPTIDE tristate "Conexant Riptide" + depends on HAS_IOPORT select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART @@ -808,6 +825,7 @@ config SND_RME9652 config SND_SE6X tristate "Studio Evolution SE6X" depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -830,7 +848,7 @@ config SND_SONICVIBES select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on the S3 SonicVibes chip. @@ -842,7 +860,7 @@ config SND_TRIDENT tristate "Trident 4D-Wave DX/NX; SiS 7018" select SND_MPU401_UART select SND_AC97_CODEC - depends on ZONE_DMA + depends on ZONE_DMA && HAS_IOPORT help Say Y here to include support for soundcards based on Trident 4D-Wave DX/NX or SiS 7018 chips. @@ -852,6 +870,7 @@ config SND_TRIDENT config SND_VIA82XX tristate "VIA 82C686A/B, 8233/8235 AC97 Controller" + depends on HAS_IOPORT select SND_MPU401_UART select SND_AC97_CODEC help @@ -863,6 +882,7 @@ config SND_VIA82XX config SND_VIA82XX_MODEM tristate "VIA 82C686A/B, 8233 based Modems" + depends on HAS_IOPORT select SND_AC97_CODEC help Say Y here to include support for the integrated MC97 modem on @@ -873,6 +893,7 @@ config SND_VIA82XX_MODEM config SND_VIRTUOSO tristate "Asus Virtuoso 66/100/200 (Xonar)" + depends on HAS_IOPORT select SND_OXYGEN_LIB select SND_PCM select SND_MPU401_UART @@ -889,6 +910,7 @@ config SND_VIRTUOSO config SND_VX222 tristate "Digigram VX222" + depends on HAS_IOPORT select SND_VX_LIB help Say Y here to include support for Digigram VX222 soundcards. @@ -898,6 +920,7 @@ config SND_VX222 config SND_YMFPCI tristate "Yamaha YMF724/740/744/754" + depends on HAS_IOPORT select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig index 10291c43cb18..2e3dfc1ff540 100644 --- a/sound/pcmcia/Kconfig +++ b/sound/pcmcia/Kconfig @@ -4,6 +4,7 @@ menuconfig SND_PCMCIA bool "PCMCIA sound devices" depends on PCMCIA + depends on HAS_IOPORT default y help Support for sound devices connected via the PCMCIA bus. -- 2.39.2

1 0

Apple USB-C dongle cannot output 44100hz
by GitHub issues - edited 16 May '23

16 May '23

alsa-project/alsa-lib issue #322 was edited from tw-hx: I have the same issue as outlined here, with an A2049 Apple USB-C to 3.5mm dongle: https://github.com/mikebrady/shairport-sync/issues/1504 Running Arch Linux with kernel 6.3.1-arch2-1, alsa-lib 1.2.9-1. Pipewire reports that the output is locked to 48000hz when it should be switching to 44100hz, and ALSA reports that this is the only detected supported rate: ``` $ cat /proc/asound/card0/stream0 Playback: Status: Running Interface = 1 Altset = 1 Packet Size = 288 Momentary freq = 48000 Hz (0x30.0000) Interface 1 Altset 1 Format: S24_3LE Channels: 2 Endpoint: 0x02 (2 OUT) (SYNC) Rates: 48000 - 48000 (continuous) Bits: 0 Channel map: FL FR Interface 1 Altset 2 Format: S16_LE Channels: 2 Endpoint: 0x02 (2 OUT) (SYNC) Rates: 48000 - 48000 (continuous) Bits: 0 Channel map: FL FR ``` Thanks if this can be fixed. It seems like a regression between Linux 4.x and 5.x, and halfway through the above thread the user [quantonian](https://github.com/quantonian) added the device to the ALSA quirks table and has posted a patch. Issue URL : https://github.com/alsa-project/alsa-lib/issues/322 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Apple USB-C dongle cannot output 44100hz
by GitHub issues - opened 16 May '23

16 May '23

alsa-project/alsa-lib issue #322 was opened from tw-hx: I have the same issue as outlined here, with an A2049 Apple USB-C to 3.5mm dongle: https://github.com/mikebrady/shairport-sync/issues/1504 Running Arch Linux with kernel 6.3.1-arch2-1, alsa-lib 1.2.9-1. Pipewire reports that the output is locked to 48000hz when it should be switching to 41000hz, and ALSA reports that this is the only detected supported rate: ``` $ cat /proc/asound/card0/stream0 Playback: Status: Running Interface = 1 Altset = 1 Packet Size = 288 Momentary freq = 48000 Hz (0x30.0000) Interface 1 Altset 1 Format: S24_3LE Channels: 2 Endpoint: 0x02 (2 OUT) (SYNC) Rates: 48000 - 48000 (continuous) Bits: 0 Channel map: FL FR Interface 1 Altset 2 Format: S16_LE Channels: 2 Endpoint: 0x02 (2 OUT) (SYNC) Rates: 48000 - 48000 (continuous) Bits: 0 Channel map: FL FR ``` Thanks if this can be fixed. It seems like a regression between Linux 4.x and 5.x, and halfway through the above thread the user [quantonian](https://github.com/quantonian) added the device to the ALSA quirks table and has posted a patch. Issue URL : https://github.com/alsa-project/alsa-lib/issues/322 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2 0/7] ALSA: emu10k1: various improvements to the DSP-based mixer code
by Oswald Buddenhagen 16 May '23

16 May '23

Oswald Buddenhagen (7): ALSA: emu10k1: polish audigy GPR allocation ALSA: emu10k1: fix non-zero mixer control defaults in highres mode ALSA: emu10k1: validate min/max values of translated controls ALSA: emu10k1: omit non-applicable mixer controls for E-MU cards ALSA: emu10k1: skip mic capture PCM for cards without AC97 codec ALSA: emu10k1: enable bit-exact playback, part 1: DSP attenuation ALSA: emu10k1: enable bit-exact playback, part 2: voice attenuation Documentation/sound/cards/audigy-mixer.rst | 2 +- Documentation/sound/cards/sb-live-mixer.rst | 2 +- include/sound/emu10k1.h | 9 +- include/uapi/sound/emu10k1.h | 8 +- sound/pci/emu10k1/emu10k1.c | 8 +- sound/pci/emu10k1/emufx.c | 491 +++++++++++--------- sound/pci/emu10k1/emumixer.c | 15 +- sound/pci/emu10k1/emupcm.c | 4 +- 8 files changed, 291 insertions(+), 248 deletions(-) -- 2.40.0.152.g15d061e6df

2 10

Update USB-Audio.conf for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080
by GitHub pull_request - edited 16 May '23

16 May '23

alsa-project/alsa-ucm-conf pull request #315 was edited from Sunsheep: Added configuration for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080 Edit: Added Information from ALSA Information Script [https://alsa-project.org/db/?f=fe7e76a335dc8f1009ecaac9aa341fb68231aee5](ht… ``` Bus 001 Device 002: ID 0b05:1a5c ASUSTek Computer, Inc. USB Audio Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0b05 ASUSTek Computer, Inc. idProduct 0x1a5c bcdDevice 0.02 iManufacturer 3 Generic iProduct 1 USB Audio iSerial 0 ``` Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Update USB-Audio.conf for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080
by GitHub pull_request - edited 16 May '23

16 May '23

alsa-project/alsa-ucm-conf pull request #315 was edited from Sunsheep: Added configuration for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080 Edit: Added Information from ALSA Information Script [https://alsa-project.org/db/?f=fe7e76a335dc8f1009ecaac9aa341fb68231aee5](ht… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Update USB-Audio.conf for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080
by GitHub pull_request - edited 16 May '23

16 May '23

alsa-project/alsa-ucm-conf pull request #315 was edited from Sunsheep: Added configuration for ASUS ROG Strix B650E-I Gaming WiFi and ALC4080 Edit: Added Information from ALSA Information Script [https://alsa-project.org/db/?f=fe7e76a335dc8f1009ecaac9aa341fb68231aee5](ur… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/315.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

external rate plugin: broken 16-bit stereo stream conversion (interleaved -> non-interleaved)
by GitHub issues - edited 16 May '23

16 May '23

alsa-project/alsa-lib issue #320 was edited from ossilator: this setup: ``` Plug PCM: Rate conversion PCM (44100, sformat=S16_LE) Converter: libspeex (external) Protocol version: 10003 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 17832 period_size : 4458 period_time : 92879 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 4458 period_event : 0 start_threshold : 17832 stop_threshold : 17832 silence_threshold: 0 silence_size : 0 boundary : 5019261784704417792 Slave: Hardware PCM card 0 'E-MU 0404b PCI [MAEM8852]' device 3 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_NONINTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 16384 period_size : 4096 period_time : 92879 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 4096 period_event : 0 start_threshold : 16384 stop_threshold : 16384 silence_threshold: 0 silence_size : 0 boundary : 4611686018427387904 appl_ptr : 0 hw_ptr : 0 ``` garbles the output rather impressively, though it's still recognizable as the input, more or less. it happens both when up-sampling and down-sampling. it doesn't happen when not re-sampling. it doesn't happen when the hardware takes 32-bit samples, so i guess it's somewhere in the optimized s16 paths. it doesn't happen with mono. this is not reproducible with the upstream emu10k1 driver, as the multichannel device demands 16 channels, which causes the route conversion plugin to be inserted, which sidesteps the issue. and the regular pcm device accepts any rate. Issue URL : https://github.com/alsa-project/alsa-lib/issues/320 Repository URL: https://github.com/alsa-project/alsa-lib

1 0