April 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 00/13] ASoC: add and use asoc_dummy_dlc
by Kuninori Morimoto 24 Apr '23

24 Apr '23

Hi Mark These are v2 patch-set of asoc_dummy_dlc. Many ASoC drivers are using dummy DAI. I have 2 concern about it. 1st one is there is no guarantee that local strings ("snd-soc-dummy-dai", "snd-soc-dummy") are kept until the card was binded if it was added at subfunction. 2nd one is we can use common snd_soc_dai_link_component for it. This patch-set adds common asoc_dummy_dlc, and use it. v1 -> v2 - Separate intel patch into 3 - Topology codec doesn't use asoc_dummy_dlc Link: https://lore.kernel.org/r/874jpe3uqh.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (13): ASoC: soc-utils.c: add asoc_dummy_dlc ASoC: ti: use asoc_dummy_dlc ASoC: sof: use asoc_dummy_dlc ASoC: amd: use asoc_dummy_dlc ASoC: fsl: use asoc_dummy_dlc ASoC: qcom: use asoc_dummy_dlc ASoC: atmel: use asoc_dummy_dlc ASoC: meson: use asoc_dummy_dlc ASoC: intel: avs: use asoc_dummy_dlc ASoC: intel: sof: use asoc_dummy_dlc ASoC: intel: skylake: use asoc_dummy_dlc ASoC: simple_card_utils.c: use asoc_dummy_dlc ASoC: soc-topology.c: add comment for Platform/Codec include/sound/simple_card_utils.h | 1 - include/sound/soc.h | 1 + sound/soc/amd/acp/acp-mach-common.c | 43 ++++++++------------ sound/soc/atmel/atmel-classd.c | 8 ++-- sound/soc/atmel/atmel-pdmic.c | 8 ++-- sound/soc/fsl/imx-audmix.c | 14 +++---- sound/soc/fsl/imx-card.c | 11 +---- sound/soc/fsl/imx-rpmsg.c | 3 +- sound/soc/fsl/imx-spdif.c | 8 ++-- sound/soc/generic/simple-card-utils.c | 9 +--- sound/soc/intel/avs/boards/i2s_test.c | 6 +-- sound/soc/intel/boards/ehl_rt5660.c | 8 +--- sound/soc/intel/boards/skl_hda_dsp_generic.c | 8 +--- sound/soc/intel/boards/sof_cs42l42.c | 11 +---- sound/soc/intel/boards/sof_es8336.c | 11 +---- sound/soc/intel/boards/sof_nau8825.c | 11 +---- sound/soc/intel/boards/sof_pcm512x.c | 3 +- sound/soc/intel/boards/sof_rt5682.c | 14 ++----- sound/soc/intel/boards/sof_sdw.c | 13 +----- sound/soc/intel/boards/sof_ssp_amp.c | 18 +++----- sound/soc/meson/axg-card.c | 8 ++-- sound/soc/meson/meson-card-utils.c | 10 +---- sound/soc/qcom/common.c | 11 +---- sound/soc/soc-topology.c | 22 +++++----- sound/soc/soc-utils.c | 7 ++++ sound/soc/sof/nocodec.c | 8 ++-- sound/soc/ti/omap-hdmi.c | 8 ++-- 27 files changed, 89 insertions(+), 194 deletions(-) -- 2.25.1

1 13

[PATCH 1/2] ALSA: emu10k1: use high-level I/O functions also during init
by Oswald Buddenhagen 23 Apr '23

23 Apr '23

... and also use more pre-defined constants on the way (some of which required adjustment). Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- This patch series needs to be applied on top of the patch titled "ALSA: emu10k1: use more existing defines instead of open-coded numbers". --- include/sound/emu10k1.h | 9 +++++---- sound/pci/emu10k1/emu10k1_main.c | 20 ++++++-------------- 2 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 5958cae819fd..05a09826eef0 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -852,10 +852,11 @@ #define A_SPDIF_MUTED 0x000000c0 #define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */ -#define A_I2S_CAPTURE_48000 0x00000000 /* unclear if this sets the ADC rate as well. */ -#define A_I2S_CAPTURE_192000 0x00000200 -#define A_I2S_CAPTURE_96000 0x00000400 -#define A_I2S_CAPTURE_44100 0x00000800 +#define A_I2S_CAPTURE_RATE 0x03090076 /* unclear if this sets the ADC rate as well. */ +#define A_I2S_CAPTURE_48000 0x0 +#define A_I2S_CAPTURE_192000 0x1 +#define A_I2S_CAPTURE_96000 0x2 +#define A_I2S_CAPTURE_44100 0x4 #define A_EHC_SRC48_MASK 0x0000e000 /* This sets the playback PCM rate on the P16V */ #define A_EHC_SRC48_BYPASS 0x00000000 diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index e53eb7fd0883..3aca01c70ccb 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -186,10 +186,7 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ /* Hacks for Alice3 to work independent of haP16V driver */ /* Setup SRCMulti_I2S SamplingRate */ - tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); - tmp &= 0xfffff1ff; - tmp |= (0x2<<9); - snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); + snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14); @@ -206,25 +203,20 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) /* Hacks for Alice3 to work independent of haP16V driver */ dev_info(emu->card->dev, "Audigy2 value: Special config.\n"); /* Setup SRCMulti_I2S SamplingRate */ - tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); - tmp &= 0xfffff1ff; - tmp |= (0x2<<9); - snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); + snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ - outl(0x600000, emu->port + 0x20); - outl(0x14, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_SRCSel, 0, 0x14); /* Setup SRCMulti Input Audio Enable */ - outl(0x7b0000, emu->port + 0x20); - outl(0xFF000000, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_MIXER_I2S_ENABLE, 0, 0xFF000000); /* Setup SPDIF Out Audio Enable */ /* The Audigy 2 Value has a separate SPDIF out, * so no need for a mixer switch */ - outl(0x7a0000, emu->port + 0x20); - outl(0xFF000000, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_MIXER_SPDIF_ENABLE, 0, 0xFF000000); + tmp = inw(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */ outw(tmp, emu->port + A_IOCFG); } -- 2.40.0.152.g15d061e6df

2 5

[PATCH] ASoC: dt-bindings: More dropping unneeded quotes
by Rob Herring 23 Apr '23

23 Apr '23

Another batch of dropping unneeded quotes on $id and $schema which were missed in the last round. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../devicetree/bindings/sound/nvidia,tegra-audio-common.yaml | 4 ++-- Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml | 4 ++-- .../devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml | 4 ++-- .../devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml | 4 ++-- Documentation/devicetree/bindings/sound/tas2562.yaml | 4 ++-- Documentation/devicetree/bindings/sound/tas2770.yaml | 4 ++-- Documentation/devicetree/bindings/sound/tas27xx.yaml | 4 ++-- Documentation/devicetree/bindings/sound/wlf,wm8903.yaml | 4 ++-- 8 files changed, 16 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml index 7c1e9895ce85..2588589ad62d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Common properties for NVIDIA Tegra audio complexes diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index cdbb4096fa44..9e5b30d9c6e6 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Process Manager Digital Audio Interfaces diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml index 1168410f6fbd..3552c44137ed 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS Clock Controller diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index 044e77718a1b..08c618e7e428 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..41489a3ac79f 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2562.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..930bd111b072 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..bda26b246634 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml index 7105ed5fd6c7..4cfa66f62681 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8903 audio codec -- 2.39.2

2 1

Re: [PATCH] ALSA: hda: Glenfly: add HD Audio PCI IDs and HDMI Codec Vendor IDs.
by Takashi Iwai 23 Apr '23

23 Apr '23

On Tue, 18 Apr 2023 10:33:12 +0200, reaperli wrote: > > From: jasontao <jasontao(a)glenfly.com> > > Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for > Glenfly Arise. > > Signed-off-by: jasontao <jasontao(a)glenfly.com> > Signed-off-by: reaperli <reaperlioc(a)glenfly.com> The patch looks OK now, but could you submit to alsa-devel ML at the next time? About details in the patch: > @@ -1743,6 +1745,8 @@ static int default_bdl_pos_adj(struct azx *chip) > } > > switch (chip->driver_type) { > + case AZX_DRIVER_GFHDMI: > + return 128; So this looks pretty high in comparison with other chips. It means that the actual position is much behind the reported position. Due to a large FIFO? Or what reason? > @@ -1859,6 +1863,9 @@ static int azx_first_init(struct azx *chip) > } > #endif > > + if (chip->driver_type == AZX_DRIVER_GFHDMI) > + bus->polling_mode = 1; This looks odd, too. Doesn't the hardware give any interrupt back upon the CORB/RIRB response? > --- a/sound/pci/hda/patch_hdmi.c > +++ b/sound/pci/hda/patch_hdmi.c > @@ -4489,6 +4489,18 @@ static int patch_via_hdmi(struct hda_codec *codec) > return patch_simple_hdmi(codec, VIAHDMI_CVT_NID, VIAHDMI_PIN_NID); > } > > +static int patch_gf_hdmi(struct hda_codec *codec) > +{ > + int err; > + > + err = patch_generic_hdmi(codec); > + if (err) > + return err; > + > + codec->no_sticky_stream = 1; This hack is needed for what reason? thanks, Takashi

2 3

[PATCH 1/2] ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
by Oswald Buddenhagen 23 Apr '23

23 Apr '23

- Use correct address limit for Audigy - Use the right constant to actually make a step on Audigy - Don't store *_DBG_STEP and the address in emu->fx8010.dbg, as otherwise unrelated operations would make steps, too This is untested. as10k1 was never ported to Audigy anyway. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- sound/pci/emu10k1/emufx.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 6a51aed59238..70ec2cb9efe8 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -2646,17 +2646,19 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un return -EPERM; if (get_user(addr, (unsigned int __user *)argp)) return -EFAULT; - if (addr > 0x1ff) - return -EINVAL; - if (emu->audigy) - snd_emu10k1_ptr_write(emu, A_DBG, 0, emu->fx8010.dbg |= A_DBG_SINGLE_STEP | addr); - else - snd_emu10k1_ptr_write(emu, DBG, 0, emu->fx8010.dbg |= EMU10K1_DBG_SINGLE_STEP | addr); - udelay(10); - if (emu->audigy) - snd_emu10k1_ptr_write(emu, A_DBG, 0, emu->fx8010.dbg |= A_DBG_SINGLE_STEP | A_DBG_STEP_ADDR | addr); - else - snd_emu10k1_ptr_write(emu, DBG, 0, emu->fx8010.dbg |= EMU10K1_DBG_SINGLE_STEP | EMU10K1_DBG_STEP | addr); + if (emu->audigy) { + if (addr > A_DBG_STEP_ADDR) + return -EINVAL; + snd_emu10k1_ptr_write(emu, A_DBG, 0, emu->fx8010.dbg |= A_DBG_SINGLE_STEP); + udelay(10); + snd_emu10k1_ptr_write(emu, A_DBG, 0, emu->fx8010.dbg | A_DBG_STEP | addr); + } else { + if (addr > EMU10K1_DBG_SINGLE_STEP_ADDR) + return -EINVAL; + snd_emu10k1_ptr_write(emu, DBG, 0, emu->fx8010.dbg |= EMU10K1_DBG_SINGLE_STEP); + udelay(10); + snd_emu10k1_ptr_write(emu, DBG, 0, emu->fx8010.dbg | EMU10K1_DBG_STEP | addr); + } return 0; case SNDRV_EMU10K1_IOCTL_DBG_READ: if (emu->audigy) -- 2.40.0.152.g15d061e6df

3 4

[PATCH] ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
by Oswald Buddenhagen 23 Apr '23

23 Apr '23

Check all inputs before changing anything, and return the right error code in case of failure. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- sound/pci/emu10k1/emumixer.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 754d91050af2..2b1afbef92c7 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -1005,33 +1005,33 @@ static int snd_audigy_i2c_volume_put(struct snd_kcontrol *kcontrol, { struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol); unsigned int ogain; - unsigned int ngain; + unsigned int ngain0, ngain1; unsigned int source_id; int change = 0; source_id = kcontrol->private_value; /* Limit: emu->i2c_capture_volume */ /* capture_source: uinfo->value.enumerated.items = 2 */ if (source_id >= 2) return -EINVAL; + ngain0 = ucontrol->value.integer.value[0]; + ngain1 = ucontrol->value.integer.value[1]; + if (ngain0 > 0xff) + return -EINVAL; + if (ngain1 > 0xff) + return -EINVAL; ogain = emu->i2c_capture_volume[source_id][0]; /* Left */ - ngain = ucontrol->value.integer.value[0]; - if (ngain > 0xff) - return 0; - if (ogain != ngain) { + if (ogain != ngain0) { if (emu->i2c_capture_source == source_id) - snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) ); - emu->i2c_capture_volume[source_id][0] = ngain; + snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCL, ngain0); + emu->i2c_capture_volume[source_id][0] = ngain0; change = 1; } ogain = emu->i2c_capture_volume[source_id][1]; /* Right */ - ngain = ucontrol->value.integer.value[1]; - if (ngain > 0xff) - return 0; - if (ogain != ngain) { + if (ogain != ngain1) { if (emu->i2c_capture_source == source_id) - snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff)); - emu->i2c_capture_volume[source_id][1] = ngain; + snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCR, ngain1); + emu->i2c_capture_volume[source_id][1] = ngain1; change = 1; } -- 2.40.0.152.g15d061e6df

2 1

[PATCH] ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
by Oswald Buddenhagen 23 Apr '23

23 Apr '23

The rev2 cards use CA0108, but the embedded P17V goes entirely unused. Also, A_IOCTL (which is really the GPIO port) is actually the FPGA control port, so messing with it is no good idea. The hacks are actually mutually exclusive, so make that explicit while we're at it. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index c37df604d470..3607d2e1c905 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -181,7 +181,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) snd_emu10k1_ptr_write(emu, SPCS1, 0, emu->spdif_bits[1]); snd_emu10k1_ptr_write(emu, SPCS2, 0, emu->spdif_bits[2]); - if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ + if (emu->card_capabilities->emu_model) { + } else if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ /* Hacks for Alice3 to work independent of haP16V driver */ /* Setup SRCMulti_I2S SamplingRate */ tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); @@ -199,8 +200,7 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) outl(0x0201, emu->port + HCFG2); /* Set playback routing. */ snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4); - } - if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */ + } else if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */ /* Hacks for Alice3 to work independent of haP16V driver */ dev_info(emu->card->dev, "Audigy2 value: Special config.\n"); /* Setup SRCMulti_I2S SamplingRate */ -- 2.40.0.152.g15d061e6df

2 1

Request to configure libhinawa and hinawa-rs repositories
by Takashi Sakamoto 23 Apr '23

23 Apr '23

Hi Jaroslav, Thanks for your administration in many repositories hosting on github.com. I'd like you to change 'About' messages for the two repositories, since I decide to host some repository in git.kernel.org. * For libhinawa repository * 'Mirror of https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/ for user support and continuous integration ' * For hinawa-rs repository * 'Mirror of https://git.kernel.org/pub/scm/libs/ieee1394/hinawa-rs.git/ for user support and continuous integration ' As getting my account in kernel.org, I will use git.kernel.org to host libhinawa[1] and hinawa-rs[2] repositories. But the issue tracker and continuous integration of github is still useful, so I would like to leave current repositories as is just for the purpose. [1] https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/ [2] https://git.kernel.org/pub/scm/libs/ieee1394/hinawa-rs.git/ Thanks in advance Takashi Sakamoto

2 2

[PATCH v2] ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
by Oswald Buddenhagen 22 Apr '23

22 Apr '23

Unlike the Alice2 chips used on 1st generation E-MU cards, the Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins, which means that we need to use a smaller mask. Failure to do so would falsify the read data if the FPGA tried to raise an IRQ right at that moment. This wasn't a problem so far, as we didn't actually enable FPGA IRQs, but that's going to change soon. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- v2: - added description --- include/sound/emu10k1.h | 3 ++- sound/pci/emu10k1/io.c | 5 ++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 89dbd2e93410..83130965c90a 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -252,7 +252,8 @@ #define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */ #define A_GPIO 0x18 /* GPIO on Audigy card (16bits) */ -#define A_GPINPUT_MASK 0xff00 +#define A_GPINPUT_MASK 0xff00 /* Alice/2 has 8 input pins */ +#define A3_GPINPUT_MASK 0x3f00 /* ... while Tina/2 has only 6 */ #define A_GPOUTPUT_MASK 0x00ff // The GPIO port is used for I/O config on Sound Blasters; diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index f0134689c320..42b06f2e5552 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -255,16 +255,19 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value) void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) { + // The higest input pin is used as the designated interrupt trigger, + // so it needs to be masked out. + u32 mask = emu->card_capabilities->ca0108_chip ? 0x1f : 0x7f; unsigned long flags; if (snd_BUG_ON(reg > 0x3f)) return; reg += 0x40; /* 0x40 upwards are registers. */ spin_lock_irqsave(&emu->emu_lock, flags); outw(reg, emu->port + A_GPIO); udelay(10); outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ udelay(10); - *value = ((inw(emu->port + A_GPIO) >> 8) & 0x7f); + *value = ((inw(emu->port + A_GPIO) >> 8) & mask); spin_unlock_irqrestore(&emu->emu_lock, flags); } -- 2.40.0.152.g15d061e6df

2 1

[PATCH v2 1/2] ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
by Oswald Buddenhagen 22 Apr '23

22 Apr '23

This was unnecessarily added in commit 09668b441da ("emu10k1 - Add PM support"). Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- v2: - paste subject of referenced commit --- sound/pci/emu10k1/emu10k1_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 3880f359e688..cbfaa4bc70a2 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -140,7 +140,7 @@ static const unsigned int i2c_adc_init[][2] = { { 0x15, ADC_MUX_2 }, /* ADC Mixer control. Mic for A2ZS Notebook */ }; -static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume) +static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) { unsigned int silent_page; int ch; @@ -1975,7 +1975,7 @@ int snd_emu10k1_create(struct snd_card *card, emu->voices[idx].number = idx; } - err = snd_emu10k1_init(emu, enable_ir, 0); + err = snd_emu10k1_init(emu, enable_ir); if (err < 0) return err; #ifdef CONFIG_PM_SLEEP @@ -2068,7 +2068,7 @@ void snd_emu10k1_resume_init(struct snd_emu10k1 *emu) snd_emu10k1_emu1010_init(emu); else snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE); - snd_emu10k1_init(emu, emu->enable_ir, 1); + snd_emu10k1_init(emu, emu->enable_ir); } void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu) -- 2.40.0.152.g15d061e6df

2 2