April 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode
by Shengjiu Wang 07 Jul '23

07 Jul '23

On i.MX8MM, the MCTL_MCLK_EN bit it is not only the gate for MCLK output to PAD, but also the gate bit between root clock and SAI module, So it is need to be enabled for master mode, otherwise there is no bclk generated. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_sai.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fa950dde5310..dae16a14f177 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -437,6 +437,12 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, savediv / 2 - 1); + if (sai->soc_data->max_register >= FSL_SAI_MCTL) { + /* SAI is in master mode at this point, so enable MCLK */ + regmap_update_bits(sai->regmap, FSL_SAI_MCTL, + FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN); + } + return 0; } -- 2.17.1

5 11

[PATCH v3 0/6] Introduce STM32 system bus
by Gatien Chevallier 05 Jul '23

05 Jul '23

Document STM32 System Bus. This bus is intended to control firewall access for the peripherals connected to it. For every peripheral, the bus checks the firewall registers to see if the peripheral is configured as non-secure. If the peripheral is configured as secure, the node is marked populated, so the device won't be probed. This is useful as a firewall configuration sanity check and avoid platform crashes in case peripherals are incorrectly configured. The STM32 System Bus implements the feature-domain-controller bindings. It is used by peripherals to reference a domain controller, in this case the firewall feature domain. The bus uses the ID referenced by the feature-domains property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. On STM32MP13/15 platforms, the firewall bus is represented by the ETZPC node, which is responsible for the securing / MCU isolating the capable peripherals. STM32MP13/15 device trees are updated in this series to implement the bus. All peripherals that are securable or MCU isolation capable by the ETZPC are connected to the bus. Changes in V2: - Corrected YAMLS errors highlighted by Rob's robot - Re-ordered Signed-off-by tags in two patches Changes in V3: - Document feature-domains property in YAML documentation for concerned periperals under the System Bus - Fix STM32 System Bus YAML documentation - Remove STM32 System bus bindings that were currently used as helpers for device tree - Correct few errors in driver - Add missing peripherals under the System Bus that were in SoC variation device tree files - Fix node names Gatien Chevallier (5): dt-bindings: treewide: add feature-domains description in binding files dt-bindings: bus: add STM32 System Bus bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards Oleksii Moisieiev (1): dt-bindings: Document common device controller bindings .../devicetree/bindings/bus/st,sys-bus.yaml | 127 + .../bindings/crypto/st,stm32-hash.yaml | 5 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 5 + .../bindings/dma/st,stm32-dmamux.yaml | 5 + .../feature-domain-controller.yaml | 84 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 5 + .../bindings/iio/adc/st,stm32-adc.yaml | 5 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 5 + .../bindings/iio/dac/st,stm32-dac.yaml | 5 + .../bindings/media/st,stm32-cec.yaml | 5 + .../bindings/media/st,stm32-dcmi.yaml | 5 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 5 + .../bindings/mfd/st,stm32-lptimer.yaml | 5 + .../bindings/mfd/st,stm32-timers.yaml | 6 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 5 + .../devicetree/bindings/net/stm32-dwmac.yaml | 5 + .../bindings/phy/phy-stm32-usbphyc.yaml | 5 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 5 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 5 + .../bindings/serial/st,stm32-uart.yaml | 5 + .../bindings/sound/st,stm32-i2s.yaml | 5 + .../bindings/sound/st,stm32-sai.yaml | 5 + .../bindings/sound/st,stm32-spdifrx.yaml | 5 + .../bindings/spi/st,stm32-qspi.yaml | 5 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 5 + .../devicetree/bindings/usb/dwc2.yaml | 5 + MAINTAINERS | 6 + arch/arm/boot/dts/stm32mp131.dtsi | 407 +-- arch/arm/boot/dts/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/stm32mp13xf.dtsi | 18 +- arch/arm/boot/dts/stm32mp151.dtsi | 2722 +++++++++-------- arch/arm/boot/dts/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/stm32mp15xc.dtsi | 19 +- drivers/bus/Kconfig | 9 + drivers/bus/Makefile | 1 + drivers/bus/stm32_sys_bus.c | 168 + 37 files changed, 2208 insertions(+), 1596 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/st,sys-bus.yaml create mode 100644 Documentation/devicetree/bindings/feature-controllers/feature-domain-controller.yaml create mode 100644 drivers/bus/stm32_sys_bus.c -- 2.35.3

7 23

[PATCH 0/3] ASoC: SOF: pcm/Intel: Handle IPC dependent sequencing correctly
by Peter Ujfalusi 30 Jun '23

30 Jun '23

Hi, IPC3 and IPC4 firmwares handle and execute tasks at different stages, like managing DMAs. In most cases these are aligned, but we have few exceptions that needs to be handled differently. This series introduces flags to handle the differing cases to make sure that the correct sequencing is used regerless of the IPC version. Regards, Peter --- Ranjani Sridharan (3): ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop ASoC: SOF: pcm: Make hw_params reset conditional for IPC3 ASoC: SOF: pcm: Improve the pcm trigger sequence sound/soc/sof/intel/hda-dai.c | 1 - sound/soc/sof/ipc3-pcm.c | 1 + sound/soc/sof/ipc4-pcm.c | 3 ++- sound/soc/sof/pcm.c | 29 ++++++++++++++++++++++------- sound/soc/sof/sof-audio.h | 6 ++++++ 5 files changed, 31 insertions(+), 9 deletions(-) -- 2.40.0

4 6

[PATCH] ASoC: qcom: common: add default jack dapm pins
by Srinivas Kandagatla 23 Jun '23

23 Jun '23

If the soundcard does not specify the dapm pins, let the common code add these pins for jack. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/qcom/common.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index c1f24af17506..555feb845c41 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -8,6 +8,11 @@ #include "qdsp6/q6afe.h" #include "common.h" +static const struct snd_soc_dapm_widget qcom_jack_snd_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + int qcom_snd_parse_of(struct snd_soc_card *card) { struct device_node *np; @@ -169,6 +174,11 @@ int qcom_snd_parse_of(struct snd_soc_card *card) of_node_put(platform); } + if (!card->dapm_widgets) { + card->dapm_widgets = qcom_jack_snd_widgets; + card->num_dapm_widgets = ARRAY_SIZE(qcom_jack_snd_widgets); + } + return 0; err: of_node_put(cpu); -- 2.21.0

3 2

[PATCH 1/2] ASoC: fsl-asoc-card: add nau8822 support
by Hui Wang 23 Jun '23

23 Jun '23

This is for an imx6sx EVB which has a nau8822 codec connects to the SSI2 interface, so add the nau8822 support in this machine driver. Because the codec driver nau8822.c doesn't handle mclk enabling, here adding a codec_priv->mclk for nau8822 and similar codecs which need to enable the mclk in the machine driver, and enable the mclk in the card_late_probe() conditionally. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/fsl/fsl-asoc-card.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index d9a0d4768c4d..89504865cb1d 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -27,6 +27,7 @@ #include "../codecs/wm8960.h" #include "../codecs/wm8994.h" #include "../codecs/tlv320aic31xx.h" +#include "../codecs/nau8822.h" #define CS427x_SYSCLK_MCLK 0 @@ -45,6 +46,7 @@ * @pll_id: PLL id for set_pll() */ struct codec_priv { + struct clk *mclk; unsigned long mclk_freq; unsigned long free_freq; u32 mclk_id; @@ -522,6 +524,9 @@ static int fsl_asoc_card_late_probe(struct snd_soc_card *card) return ret; } + if (!IS_ERR_OR_NULL(codec_priv->mclk)) + clk_prepare_enable(codec_priv->mclk); + return 0; } @@ -682,6 +687,14 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->codec_priv.free_freq = priv->codec_priv.mclk_freq; priv->card.dapm_routes = NULL; priv->card.num_dapm_routes = 0; + } else if (of_device_is_compatible(np, "fsl,imx-audio-nau8822")) { + codec_dai_name = "nau8822-hifi"; + priv->codec_priv.mclk_id = NAU8822_CLK_MCLK; + priv->codec_priv.fll_id = NAU8822_CLK_PLL; + priv->codec_priv.pll_id = NAU8822_CLK_PLL; + priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; + if (codec_dev) + priv->codec_priv.mclk = devm_clk_get(codec_dev, NULL); } else { dev_err(&pdev->dev, "unknown Device Tree compatible\n"); ret = -EINVAL; @@ -907,6 +920,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-wm8524", }, { .compatible = "fsl,imx-audio-si476x", }, { .compatible = "fsl,imx-audio-wm8958", }, + { .compatible = "fsl,imx-audio-nau8822", }, {} }; MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids); -- 2.25.1

2 2

[regression] Bug 216818 - The microphone mute led not working after linux 6
by Thorsten Leemhuis 20 Jun '23

20 Jun '23

Hi, this is your Linux kernel regression tracker speaking. I noticed a regression report in bugzilla.kernel.org. As many (most?) kernel developer don't keep an eye on it, I decided to forward it by mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=216818 : > sonic82003(a)gmail.com 2022-12-18 08:52:32 UTC > > The mic mute led of my ThinkPad X1 Carbon Gen 9 doesn't work anymore after updating linux to version 6. > I can still turn it on by running > > echo 1 > /sys/class/leds/platform::micmute/brightness > > With linux-lts it still works fine. See the ticket for more details. Note, I found a similar report that (despite my attempts to prevent things like this from happening) fell through the cracks here: https://bugzilla.kernel.org/show_bug.cgi?id=216355 > plum 2022-08-13 02:11:01 UTC > > I upgrade to kernel 5.19.1 but found my thinkpad x1 carbon 2021's mute led stop working. > > Function is okay but LED won't light up. > > Back to kernel 5.18 and it's normal and working again. > > Fedora 36 64 bit > Gnome-shell 42 >From a quick research it looks to me like this is an issue for the sounds maintainers, as the LED itself apparently works. If that is something for the platform people instead please speak up. BTW, let me use this mail to also add the report to the list of tracked regressions to ensure it's doesn't fall through the cracks: #regzbot introduced: v5.18..v5.19 https://bugzilla.kernel.org/show_bug.cgi?id=216818 #regzbot ignore-activity Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) P.S.: As the Linux kernel's regression tracker I deal with a lot of reports and sometimes miss something important when writing mails like this. If that's the case here, don't hesitate to tell me in a public reply, it's in everyone's interest to set the public record straight.

5 5

[PATCH] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 16 Jun '23

16 Jun '23

The default timeout for kselftests is 45 seconds, but pcm-test can take longer than that to run depending on the number of PCMs present on a device. As a data point, running pcm-test on mt8192-asurada-spherion takes about 1m15s. Set the timeout to 10 minutes, which should give enough slack to run the test even on devices with many PCMs. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=600 -- 2.39.0

4 5

[PATCH] ASoC: SOF: ipc4/intel: Add missing mutex_unlock()
by Jyri Sarha 12 Jun '23

12 Jun '23

There was a missing mutex_unlock() in sof_ipc4_widget_free() use_chain_dma if-branch that caused a static analysis error. The branch should not be used in a normal working configuration and if its used its an indication of a bad topology. Add missing mutex_unlock() and a warning print if the if-branch is taken, and another warning print to a symmetric place in sof_ipc4_widget_setup(). Fixes: ca5ce0caa67fa9 ("ASoC: SOF: ipc4/intel: Add support for chained DMA") Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <error27(a)gmail.com> Link: https://lore.kernel.org/r/202303222050.dCw0fPCW-lkp@intel.com/ Signed-off-by: Jyri Sarha <jyri.sarha(a)linux.intel.com> --- sound/soc/sof/ipc4-topology.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index f1e1aed94da4..12775fcb6b54 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1989,8 +1989,11 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget case snd_soc_dapm_scheduler: pipeline = swidget->private; - if (pipeline->use_chain_dma) + if (pipeline->use_chain_dma) { + dev_warn(sdev->dev, "use_chain_dma set for schduler %s", + swidget->widget->name); return 0; + } dev_dbg(sdev->dev, "pipeline: %d memory pages: %d\n", swidget->pipeline_id, pipeline->mem_usage); @@ -2145,8 +2148,12 @@ static int sof_ipc4_widget_free(struct snd_sof_dev *sdev, struct snd_sof_widget struct sof_ipc4_msg msg = {{ 0 }}; u32 header; - if (pipeline->use_chain_dma) + if (pipeline->use_chain_dma) { + dev_warn(sdev->dev, "use_chain_dma set for schduler %s", + swidget->widget->name); + mutex_unlock(&ipc4_data->pipeline_state_mutex); return 0; + } header = SOF_IPC4_GLB_PIPE_INSTANCE_ID(swidget->instance_id); header |= SOF_IPC4_MSG_TYPE_SET(SOF_IPC4_GLB_DELETE_PIPELINE); -- 2.34.1

4 3

[PATCH] ALSA: pcm: fix wait_time calculations
by Oswald Buddenhagen 12 Jun '23

12 Jun '23

... in wait_for_avail() and snd_pcm_drain(). t was calculated in seconds, so it would be pretty much always zero, to be subsequently de-facto ignored due to being max(t, 10)'d. And then it (i.e., 10) would be treated as secs, which doesn't seem right. However, fixing it to properly calculate msecs would potentially cause timeouts when using twice the period size for the default timeout (which seems reasonable to me), so instead use the buffer size plus 10 percent to be on the safe side ... but that still seems insufficient, presumably because the hardware typically needs a moment to fire up. To compensate for this, we up the minimal timeout to 100ms, which is still two orders of magnitude less than the bogus minimum. substream->wait_time was also misinterpreted as jiffies, despite being documented as being in msecs. Only the soc/sof driver sets it - to 500, which looks very much like msecs were intended. Speaking of which, shouldn't snd_pcm_drain() also use substream-> wait_time? As a drive-by, make the debug messages on timeout less confusing. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- sound/core/pcm_lib.c | 11 +++++------ sound/core/pcm_native.c | 8 ++++---- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 02fd65993e7e..af1eb136feb0 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1878,15 +1878,14 @@ static int wait_for_avail(struct snd_pcm_substream *substream, if (substream->wait_time) { wait_time = substream->wait_time; } else { - wait_time = 10; + wait_time = 100; if (runtime->rate) { - long t = runtime->period_size * 2 / - runtime->rate; + long t = runtime->buffer_size * 1100 / runtime->rate; wait_time = max(t, wait_time); } - wait_time = msecs_to_jiffies(wait_time * 1000); } + wait_time = msecs_to_jiffies(wait_time); } for (;;) { @@ -1934,8 +1933,8 @@ static int wait_for_avail(struct snd_pcm_substream *substream, } if (!tout) { pcm_dbg(substream->pcm, - "%s write error (DMA or IRQ trouble?)\n", - is_playback ? "playback" : "capture"); + "%s timeout (DMA or IRQ trouble?)\n", + is_playback ? "playback write" : "capture read"); err = -EIO; break; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 331380c2438b..94185267a7b9 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -2159,12 +2159,12 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, if (runtime->no_period_wakeup) tout = MAX_SCHEDULE_TIMEOUT; else { - tout = 10; + tout = 100; if (runtime->rate) { - long t = runtime->period_size * 2 / runtime->rate; + long t = runtime->buffer_size * 1100 / runtime->rate; tout = max(t, tout); } - tout = msecs_to_jiffies(tout * 1000); + tout = msecs_to_jiffies(tout); } tout = schedule_timeout(tout); @@ -2187,7 +2187,7 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, result = -ESTRPIPE; else { dev_dbg(substream->pcm->card->dev, - "playback drain error (DMA or IRQ trouble?)\n"); + "playback drain timeout (DMA or IRQ trouble?)\n"); snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); result = -EIO; } -- 2.40.0.152.g15d061e6df

3 5

[PATCH 00/43] ep93xx device tree conversion
by Nikita Shubin 01 Jun '23

01 Jun '23

This series aims to convert ep93xx from platform to full device tree support. Tested on ts7250 64 RAM/128 MiB Nand flash, edb9302. Thank you Linus and Arnd for your support, review and comments, sorry if i missed something - these series are quite big for me. Big thanks to Alexander Sverdlin for his testing, support, review, fixes and patches. Alexander Sverdlin (4): ARM: dts: ep93xx: Add ADC node ARM: dts: ep93xx: Add I2S and AC97 nodes ARM: dts: ep93xx: Add EDB9302 DT ASoC: cirrus: edb93xx: Delete driver Nikita Shubin (39): gpio: ep93xx: split device in multiple soc: Add SoC driver for Cirrus ep93xx dt-bindings: pinctrl: Add DT bindings ep93xx pinctrl pinctrl: add a Cirrus ep93xx SoC pin controller dt-bindings: timers: add DT bindings for Cirrus EP93xx clocksource: ep93xx: Add driver for Cirrus Logic EP93xx dt-bindings: rtc: add DT bindings for Cirrus EP93xx rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: watchdog: add DT bindings for Cirrus EP93x watchdog: ep93xx: add DT support for Cirrus EP93xx dt-bindings: clock: add DT bindings for Cirrus EP93xx clk: ep93xx: add DT support for Cirrus EP93xx power: reset: Add a driver for the ep93xx reset dt-bindings: pwm: Add DT bindings ep93xx PWM pwm: ep93xx: add DT support for Cirrus EP93xx dt-bindings: spi: Add DT bindings ep93xx spi spi: ep93xx: add DT support for Cirrus EP93xx dt-bindings: net: Add DT bindings ep93xx eth net: cirrus: add DT support for Cirrus EP93xx dt-bindings: dma: Add DT bindings ep93xx dma dma: cirrus: add DT support for Cirrus EP93xx dt-bindings: mtd: add DT bindings for ts7250 nand mtd: ts72xx_nand: add platform helper dt-bindings: ata: Add DT bindings ep93xx pata pata: cirrus: add DT support for Cirrus EP93xx dt-bindings: input: Add DT bindings ep93xx keypad input: keypad: ep93xx: add DT support for Cirrus EP93xx dt-bindings: rtc: Add DT binding m48t86 rtc rtc: m48t86: add DT support for m48t86 dt-bindings: wdt: Add DT binding ts72xx wdt wdt: ts72xx: add DT support for ts72xx dt-bindings: gpio: Add DT bindings ep93xx gpio gpio: ep93xx: add DT support for gpio-ep93xx ARM: dts: add device tree for ep93xx Soc ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms pwm: ep93xx: drop legacy pinctrl input: keypad: ep93xx: drop legacy pinctrl ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles .../devicetree/bindings/arm/ep93xx.yaml | 99 + .../bindings/ata/cirrus,ep93xx-pata.yaml | 40 + .../bindings/dma/cirrus,ep93xx-dma-m2m.yaml | 66 + .../bindings/dma/cirrus,ep93xx-dma-m2p.yaml | 102 + .../devicetree/bindings/gpio/gpio-ep93xx.yaml | 161 ++ .../bindings/input/cirrus,ep93xx-keypad.yaml | 123 ++ .../bindings/mtd/technologic,nand.yaml | 56 + .../bindings/net/cirrus,ep93xx_eth.yaml | 51 + .../pinctrl/cirrus,ep93xx-pinctrl.yaml | 66 + .../bindings/pwm/cirrus,ep93xx-pwm.yaml | 45 + .../bindings/rtc/cirrus,ep93xx-rtc.yaml | 32 + .../bindings/rtc/dallas,rtc-m48t86.yaml | 33 + .../devicetree/bindings/spi/spi-ep93xx.yaml | 68 + .../bindings/timer/cirrus,ep93xx-timer.yaml | 41 + .../bindings/watchdog/cirrus,ep93xx-wdt.yaml | 38 + .../watchdog/technologic,ts72xx-wdt.yaml | 39 + arch/arm/Makefile | 1 - arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ep93xx-bk3.dts | 96 + arch/arm/boot/dts/ep93xx-edb9302.dts | 150 ++ arch/arm/boot/dts/ep93xx-ts7250.dts | 113 ++ arch/arm/boot/dts/ep93xx.dtsi | 466 +++++ arch/arm/mach-ep93xx/Kconfig | 20 +- arch/arm/mach-ep93xx/Makefile | 11 - arch/arm/mach-ep93xx/core.c | 1017 ---------- arch/arm/mach-ep93xx/dma.c | 114 -- arch/arm/mach-ep93xx/edb93xx.c | 344 ---- arch/arm/mach-ep93xx/ep93xx-regs.h | 38 - arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 -- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 - arch/arm/mach-ep93xx/platform.h | 42 - arch/arm/mach-ep93xx/soc.h | 212 -- arch/arm/mach-ep93xx/ts72xx.c | 422 ---- arch/arm/mach-ep93xx/ts72xx.h | 94 - arch/arm/mach-ep93xx/vision_ep9307.c | 311 --- drivers/ata/pata_ep93xx.c | 9 + drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + .../clock.c => drivers/clk/clk-ep93xx.c | 491 +++-- drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + .../clocksource}/timer-ep93xx.c | 143 +- drivers/dma/ep93xx_dma.c | 119 +- drivers/gpio/gpio-ep93xx.c | 329 ++-- drivers/input/keyboard/ep93xx_keypad.c | 25 +- drivers/mtd/nand/raw/Kconfig | 8 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/ts72xx_nand.c | 94 + drivers/net/ethernet/cirrus/ep93xx_eth.c | 49 +- drivers/pinctrl/Kconfig | 7 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ep93xx.c | 1698 +++++++++++++++++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ep93xx-restart.c | 65 + drivers/pwm/pwm-ep93xx.c | 24 +- drivers/rtc/rtc-ep93xx.c | 8 + drivers/rtc/rtc-m48t86.c | 10 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/cirrus/Kconfig | 11 + drivers/soc/cirrus/Makefile | 2 + drivers/soc/cirrus/soc-ep93xx.c | 134 ++ drivers/spi/spi-ep93xx.c | 31 +- drivers/watchdog/ep93xx_wdt.c | 8 + drivers/watchdog/ts72xx_wdt.c | 8 + .../dt-bindings/clock/cirrus,ep93xx-clock.h | 53 + include/linux/platform_data/dma-ep93xx.h | 3 + include/linux/soc/cirrus/ep93xx.h | 28 +- sound/soc/cirrus/Kconfig | 9 - sound/soc/cirrus/Makefile | 4 - sound/soc/cirrus/edb93xx.c | 119 -- 73 files changed, 4796 insertions(+), 3453 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/ep93xx.yaml create mode 100644 Documentation/devicetree/bindings/ata/cirrus,ep93xx-pata.yaml create mode 100644 Documentation/devicetree/bindings/dma/cirrus,ep93xx-dma-m2m.yaml create mode 100644 Documentation/devicetree/bindings/dma/cirrus,ep93xx-dma-m2p.yaml create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ep93xx.yaml create mode 100644 Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml create mode 100644 Documentation/devicetree/bindings/mtd/technologic,nand.yaml create mode 100644 Documentation/devicetree/bindings/net/cirrus,ep93xx_eth.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,ep93xx-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pwm/cirrus,ep93xx-pwm.yaml create mode 100644 Documentation/devicetree/bindings/rtc/cirrus,ep93xx-rtc.yaml create mode 100644 Documentation/devicetree/bindings/rtc/dallas,rtc-m48t86.yaml create mode 100644 Documentation/devicetree/bindings/spi/spi-ep93xx.yaml create mode 100644 Documentation/devicetree/bindings/timer/cirrus,ep93xx-timer.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/cirrus,ep93xx-wdt.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/technologic,ts72xx-wdt.yaml create mode 100644 arch/arm/boot/dts/ep93xx-bk3.dts create mode 100644 arch/arm/boot/dts/ep93xx-edb9302.dts create mode 100644 arch/arm/boot/dts/ep93xx-ts7250.dts create mode 100644 arch/arm/boot/dts/ep93xx.dtsi delete mode 100644 arch/arm/mach-ep93xx/Makefile delete mode 100644 arch/arm/mach-ep93xx/core.c delete mode 100644 arch/arm/mach-ep93xx/dma.c delete mode 100644 arch/arm/mach-ep93xx/edb93xx.c delete mode 100644 arch/arm/mach-ep93xx/ep93xx-regs.h delete mode 100644 arch/arm/mach-ep93xx/gpio-ep93xx.h delete mode 100644 arch/arm/mach-ep93xx/hardware.h delete mode 100644 arch/arm/mach-ep93xx/irqs.h delete mode 100644 arch/arm/mach-ep93xx/platform.h delete mode 100644 arch/arm/mach-ep93xx/soc.h delete mode 100644 arch/arm/mach-ep93xx/ts72xx.c delete mode 100644 arch/arm/mach-ep93xx/ts72xx.h delete mode 100644 arch/arm/mach-ep93xx/vision_ep9307.c rename arch/arm/mach-ep93xx/clock.c => drivers/clk/clk-ep93xx.c (60%) rename {arch/arm/mach-ep93xx => drivers/clocksource}/timer-ep93xx.c (51%) create mode 100644 drivers/mtd/nand/raw/ts72xx_nand.c create mode 100644 drivers/pinctrl/pinctrl-ep93xx.c create mode 100644 drivers/power/reset/ep93xx-restart.c create mode 100644 drivers/soc/cirrus/Kconfig create mode 100644 drivers/soc/cirrus/Makefile create mode 100644 drivers/soc/cirrus/soc-ep93xx.c create mode 100644 include/dt-bindings/clock/cirrus,ep93xx-clock.h delete mode 100644 sound/soc/cirrus/edb93xx.c -- 2.39.2

7 11