October 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v1] ALSA: SOF: sof-pci-dev: Fix community key quirk detection
by Mark Hasemeyer 24 Oct '23

24 Oct '23

Some Chromebooks do not populate the product family DMI value resulting in firmware load failures. Add another quirk detection entry that looks for "Google" in the BIOS version. Theoretically, PRODUCT_FAMILY could be replaced with BIOS_VERSION, but it is left as a quirk to be conservative. Cc: stable(a)vger.kernel.org Signed-off-by: Mark Hasemeyer <markhas(a)chromium.org> --- sound/soc/sof/sof-pci-dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index 1d706490588e..64b326e3ef85 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -145,6 +145,13 @@ static const struct dmi_system_id community_key_platforms[] = { DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"), } }, + { + .ident = "Google firmware", + .callback = chromebook_use_community_key, + .matches = { + DMI_MATCH(DMI_BIOS_VERSION, "Google"), + } + }, {}, }; -- 2.42.0.655.g421f12c284-goog

4 4

[PATCH] ASoC: es8328: Use rounded rate for es8328_set_sysclk()
by Chris Morgan 24 Oct '23

24 Oct '23

From: Chris Morgan <macromorgan(a)hotmail.com> I have a board (RK3588 based) that sets the sysclk to 12287999. The es8328 driver fails to match this to the 12288000 rate and fails to load. Allow the rate comparison to work if the frequency is within 100hz by dividing it by 100 and rounding it, then multiplying it back by 100. Note the 100hz value was chosen arbitrarily by me, but it has only been tested with a 1hz difference. Signed-off-by: Chris Morgan <macromorgan(a)hotmail.com> --- sound/soc/codecs/es8328.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c index 0bd9ba5a11b4..22e7a9312732 100644 --- a/sound/soc/codecs/es8328.c +++ b/sound/soc/codecs/es8328.c @@ -557,8 +557,15 @@ static int es8328_set_sysclk(struct snd_soc_dai *codec_dai, struct snd_soc_component *component = codec_dai->component; struct es8328_priv *es8328 = snd_soc_component_get_drvdata(component); int mclkdiv2 = 0; + unsigned int round_freq; - switch (freq) { + /* + * Allow a small tolerance for frequencies within 100hz. Note + * this value is chosen arbitrarily. + */ + round_freq = DIV_ROUND_CLOSEST(freq, 100) * 100; + + switch (round_freq) { case 0: es8328->sysclk_constraints = NULL; es8328->mclk_ratios = NULL; -- 2.34.1

2 1

[PATCH v2] ASoC: fsl: Fix PM disable depth imbalance in fsl_easrc_probe
by Zhang Shurong 24 Oct '23

24 Oct '23

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by calling pm_runtime_disable when error returns. Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Signed-off-by: Zhang Shurong <zhang_shurong(a)foxmail.com> --- v1->v2: add Fixes tag sound/soc/fsl/fsl_easrc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c index ba62995c909a..ec53bda46a46 100644 --- a/sound/soc/fsl/fsl_easrc.c +++ b/sound/soc/fsl/fsl_easrc.c @@ -1966,17 +1966,21 @@ static int fsl_easrc_probe(struct platform_device *pdev) &fsl_easrc_dai, 1); if (ret) { dev_err(dev, "failed to register ASoC DAI\n"); - return ret; + goto err_pm_disable; } ret = devm_snd_soc_register_component(dev, &fsl_asrc_component, NULL, 0); if (ret) { dev_err(&pdev->dev, "failed to register ASoC platform\n"); - return ret; + goto err_pm_disable; } return 0; + +err_pm_disable: + pm_runtime_disable(&pdev->dev); + return ret; } static void fsl_easrc_remove(struct platform_device *pdev) -- 2.30.2

2 1

[PATCH 0/7] ASoc: Another series to convert to struct platform_driver:remove_new()
by Uwe Kleine-König 24 Oct '23

24 Oct '23

Hello, this is another series to convert ASoC drivers to use struct platform_driver:remove_new(). The rockchip one was already send before but with a wrong subject prefix, the cs42l43 driver is newer than the last series. The remaining five patches are for driver combos that my coccinelle patch failed to detect before. Best regards Uwe Uwe Kleine-König (7): ASoC: rockchip: i2s_tdm: Convert to platform remove callback returning void ASoC: cs42l43: Convert to platform remove callback returning void ASoC: starfive/jh7110-pwmdac: Convert to platform remove callback returning void ASoC: simple-card-utils: Make simple_util_remove() return void ASoC: meson: Make meson_card_remove() return void ASoC: qcom: lpass: Make asoc_qcom_lpass_cpu_platform_remove() return void ASoC: uniphier: Make uniphier_aio_remove() return void include/sound/simple_card_utils.h | 2 +- sound/soc/codecs/cs42l43.c | 6 ++---- sound/soc/generic/audio-graph-card.c | 2 +- sound/soc/generic/audio-graph-card2-custom-sample.c | 2 +- sound/soc/generic/audio-graph-card2.c | 2 +- sound/soc/generic/simple-card-utils.c | 4 +--- sound/soc/generic/simple-card.c | 2 +- sound/soc/meson/axg-card.c | 2 +- sound/soc/meson/gx-card.c | 2 +- sound/soc/meson/meson-card-utils.c | 4 +--- sound/soc/meson/meson-card.h | 2 +- sound/soc/qcom/lpass-apq8016.c | 2 +- sound/soc/qcom/lpass-cpu.c | 5 +---- sound/soc/qcom/lpass-ipq806x.c | 2 +- sound/soc/qcom/lpass-sc7180.c | 2 +- sound/soc/qcom/lpass-sc7280.c | 2 +- sound/soc/qcom/lpass.h | 2 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 6 ++---- sound/soc/starfive/jh7110_pwmdac.c | 5 ++--- sound/soc/tegra/tegra_audio_graph_card.c | 2 +- sound/soc/uniphier/aio-cpu.c | 4 +--- sound/soc/uniphier/aio-ld11.c | 2 +- sound/soc/uniphier/aio-pxs2.c | 2 +- sound/soc/uniphier/aio.h | 2 +- 24 files changed, 27 insertions(+), 41 deletions(-) base-commit: e3b18f7200f45d66f7141136c25554ac1e82009b -- 2.42.0

5 11

[PATCH v3] ALSA: virtio: use ack callback
by Matias Ezequiel Vara Larsen 24 Oct '23

24 Oct '23

This commit uses the ack() callback to determine when a buffer has been updated, then exposes it to guest. The current mechanism splits a dma buffer into descriptors that are exposed to the device. This dma buffer is shared with the user application. When the device consumes a buffer, the driver moves the request from the used ring to available ring. The driver exposes the buffer to the device without knowing if the content has been updated from the user. The section 2.8.21.1 of the virtio spec states that: "The device MAY access the descriptor chains the driver created and the memory they refer to immediately". If the device picks up buffers from the available ring just after it is notified, it happens that the content may be old. When the ack() callback is invoked, the driver exposes only the buffers that have already been updated, i.e., enqueued in the available ring. Thus, the device always picks up a buffer that is updated. For capturing, the driver starts by exposing all the available buffers to device. After device updates the content of a buffer, it enqueues it in the used ring. It is only after the ack() for capturing is issued that the driver re-enqueues the buffer in the available ring. Co-developed-by: Anton Yakovlev <anton.yakovlev(a)opensynergy.com> Signed-off-by: Anton Yakovlev <anton.yakovlev(a)opensynergy.com> Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar(a)redhat.com> --- Changelog: v2 -> v3: * Use ack() callback instead of copy()/fill_silence() * Change commit name * Rewrite commit message * Remove virtsnd_pcm_msg_send_locked() * Use single callback for both capture and playback * Fix kernel test robot warnings regarding documentation * v2 patch at: https://lore.kernel.org/lkml/87y1fzkq8c.wl-tiwai@suse.de/T/ v1 -> v2: * Use snd_pcm_set_managed_buffer_all()for buffer allocation/freeing. * Make virtsnd_pcm_msg_send() generic by specifying the offset and size for the modified part of the buffer; this way no assumptions need to be made. * Disable SNDRV_PCM_INFO_NO_REWINDS since now only sequential reading/writing of frames is supported. * Correct comment at virtsnd_pcm_msg_send(). * v1 patch at: https://lore.kernel.org/lkml/20231016151000.GE119987@fedora/t/ sound/virtio/virtio_pcm.c | 1 + sound/virtio/virtio_pcm.h | 6 ++- sound/virtio/virtio_pcm_msg.c | 80 ++++++++++++++++++++--------------- sound/virtio/virtio_pcm_ops.c | 30 +++++++++++-- 4 files changed, 79 insertions(+), 38 deletions(-) diff --git a/sound/virtio/virtio_pcm.c b/sound/virtio/virtio_pcm.c index c10d91fff2fb..9cc5a95b4913 100644 --- a/sound/virtio/virtio_pcm.c +++ b/sound/virtio/virtio_pcm.c @@ -124,6 +124,7 @@ static int virtsnd_pcm_build_hw(struct virtio_pcm_substream *vss, values = le64_to_cpu(info->formats); vss->hw.formats = 0; + vss->appl_ptr = 0; for (i = 0; i < ARRAY_SIZE(g_v2a_format_map); ++i) if (values & (1ULL << i)) { diff --git a/sound/virtio/virtio_pcm.h b/sound/virtio/virtio_pcm.h index 062eb8e8f2cf..ea3c2845ae9b 100644 --- a/sound/virtio/virtio_pcm.h +++ b/sound/virtio/virtio_pcm.h @@ -27,6 +27,7 @@ struct virtio_pcm_msg; * substream operators. * @buffer_bytes: Current buffer size in bytes. * @hw_ptr: Substream hardware pointer value in bytes [0 ... buffer_bytes). + * @appl_ptr: Substream application pointer value in bytes [0 ... buffer_bytes). * @xfer_enabled: Data transfer state (0 - off, 1 - on). * @xfer_xrun: Data underflow/overflow state (0 - no xrun, 1 - xrun). * @stopped: True if the substream is stopped and must be released on the device @@ -51,13 +52,13 @@ struct virtio_pcm_substream { spinlock_t lock; size_t buffer_bytes; size_t hw_ptr; + size_t appl_ptr; bool xfer_enabled; bool xfer_xrun; bool stopped; bool suspended; struct virtio_pcm_msg **msgs; unsigned int nmsgs; - int msg_last_enqueued; unsigned int msg_count; wait_queue_head_t msg_empty; }; @@ -117,7 +118,8 @@ int virtsnd_pcm_msg_alloc(struct virtio_pcm_substream *vss, void virtsnd_pcm_msg_free(struct virtio_pcm_substream *vss); -int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss); +int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss, unsigned long offset, + unsigned long bytes); unsigned int virtsnd_pcm_msg_pending_num(struct virtio_pcm_substream *vss); diff --git a/sound/virtio/virtio_pcm_msg.c b/sound/virtio/virtio_pcm_msg.c index aca2dc1989ba..106e8e847746 100644 --- a/sound/virtio/virtio_pcm_msg.c +++ b/sound/virtio/virtio_pcm_msg.c @@ -155,7 +155,6 @@ int virtsnd_pcm_msg_alloc(struct virtio_pcm_substream *vss, sizeof(msg->xfer)); sg_init_one(&msg->sgs[PCM_MSG_SG_STATUS], &msg->status, sizeof(msg->status)); - msg->length = period_bytes; virtsnd_pcm_sg_from(&msg->sgs[PCM_MSG_SG_DATA], sg_num, data, period_bytes); @@ -181,66 +180,81 @@ void virtsnd_pcm_msg_free(struct virtio_pcm_substream *vss) vss->msgs = NULL; vss->nmsgs = 0; + vss->appl_ptr = 0; } /** * virtsnd_pcm_msg_send() - Send asynchronous I/O messages. * @vss: VirtIO PCM substream. + * @offset: starting position that has been updated + * @bytes: number of bytes that has been updated * * All messages are organized in an ordered circular list. Each time the * function is called, all currently non-enqueued messages are added to the - * virtqueue. For this, the function keeps track of two values: - * - * msg_last_enqueued = index of the last enqueued message, - * msg_count = # of pending messages in the virtqueue. + * virtqueue. For this, the function uses offset and bytes to calculate the + * messages that need to be added. * * Context: Any context. Expects the tx/rx queue and the VirtIO substream * spinlocks to be held by caller. * Return: 0 on success, -errno on failure. */ -int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss) +int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss, unsigned long offset, + unsigned long bytes) { - struct snd_pcm_runtime *runtime = vss->substream->runtime; struct virtio_snd *snd = vss->snd; struct virtio_device *vdev = snd->vdev; struct virtqueue *vqueue = virtsnd_pcm_queue(vss)->vqueue; - int i; - int n; + unsigned long period_bytes = snd_pcm_lib_period_bytes(vss->substream); + unsigned long start, end, i; + unsigned int msg_count = vss->msg_count; bool notify = false; + int rc; - i = (vss->msg_last_enqueued + 1) % runtime->periods; - n = runtime->periods - vss->msg_count; + start = offset / period_bytes; + end = (offset + bytes - 1) / period_bytes; - for (; n; --n, i = (i + 1) % runtime->periods) { + for (i = start; i <= end; i++) { struct virtio_pcm_msg *msg = vss->msgs[i]; struct scatterlist *psgs[] = { &msg->sgs[PCM_MSG_SG_XFER], &msg->sgs[PCM_MSG_SG_DATA], &msg->sgs[PCM_MSG_SG_STATUS] }; - int rc; - - msg->xfer.stream_id = cpu_to_le32(vss->sid); - memset(&msg->status, 0, sizeof(msg->status)); - - if (vss->direction == SNDRV_PCM_STREAM_PLAYBACK) - rc = virtqueue_add_sgs(vqueue, psgs, 2, 1, msg, - GFP_ATOMIC); - else - rc = virtqueue_add_sgs(vqueue, psgs, 1, 2, msg, - GFP_ATOMIC); - - if (rc) { - dev_err(&vdev->dev, - "SID %u: failed to send I/O message\n", - vss->sid); - return rc; + unsigned long n; + + n = period_bytes - (offset % period_bytes); + if (n > bytes) + n = bytes; + + msg->length += n; + if (msg->length == period_bytes) { + msg->xfer.stream_id = cpu_to_le32(vss->sid); + memset(&msg->status, 0, sizeof(msg->status)); + + if (vss->direction == SNDRV_PCM_STREAM_PLAYBACK) + rc = virtqueue_add_sgs(vqueue, psgs, 2, 1, msg, + GFP_ATOMIC); + else + rc = virtqueue_add_sgs(vqueue, psgs, 1, 2, msg, + GFP_ATOMIC); + + if (rc) { + dev_err(&vdev->dev, + "SID %u: failed to send I/O message\n", + vss->sid); + return rc; + } + + vss->msg_count++; } - vss->msg_last_enqueued = i; - vss->msg_count++; + offset = 0; + bytes -= n; } + if (msg_count == vss->msg_count) + return 0; + if (!(vss->features & (1U << VIRTIO_SND_PCM_F_MSG_POLLING))) notify = virtqueue_kick_prepare(vqueue); @@ -309,6 +323,8 @@ static void virtsnd_pcm_msg_complete(struct virtio_pcm_msg *msg, if (vss->hw_ptr >= vss->buffer_bytes) vss->hw_ptr -= vss->buffer_bytes; + msg->length = 0; + vss->xfer_xrun = false; vss->msg_count--; @@ -320,8 +336,6 @@ static void virtsnd_pcm_msg_complete(struct virtio_pcm_msg *msg, le32_to_cpu(msg->status.latency_bytes)); schedule_work(&vss->elapsed_period); - - virtsnd_pcm_msg_send(vss); } else if (!vss->msg_count) { wake_up_all(&vss->msg_empty); } diff --git a/sound/virtio/virtio_pcm_ops.c b/sound/virtio/virtio_pcm_ops.c index f8bfb87624be..21cde37ecfa3 100644 --- a/sound/virtio/virtio_pcm_ops.c +++ b/sound/virtio/virtio_pcm_ops.c @@ -282,7 +282,6 @@ static int virtsnd_pcm_prepare(struct snd_pcm_substream *substream) vss->buffer_bytes = snd_pcm_lib_buffer_bytes(substream); vss->hw_ptr = 0; - vss->msg_last_enqueued = -1; } else { struct snd_pcm_runtime *runtime = substream->runtime; unsigned int buffer_bytes = snd_pcm_lib_buffer_bytes(substream); @@ -324,7 +323,7 @@ static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command) struct virtio_snd_queue *queue; struct virtio_snd_msg *msg; unsigned long flags; - int rc; + int rc = 0; switch (command) { case SNDRV_PCM_TRIGGER_START: @@ -333,7 +332,8 @@ static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command) spin_lock_irqsave(&queue->lock, flags); spin_lock(&vss->lock); - rc = virtsnd_pcm_msg_send(vss); + if (vss->direction == SNDRV_PCM_STREAM_CAPTURE) + rc = virtsnd_pcm_msg_send(vss, 0, vss->buffer_bytes); if (!rc) vss->xfer_enabled = true; spin_unlock(&vss->lock); @@ -450,6 +450,29 @@ virtsnd_pcm_pointer(struct snd_pcm_substream *substream) return hw_ptr; } +static int virtsnd_pcm_ack(struct snd_pcm_substream *substream) +{ + struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream); + struct virtio_snd_queue *queue = virtsnd_pcm_queue(vss); + unsigned long flags; + struct snd_pcm_runtime *runtime = vss->substream->runtime; + ssize_t appl_pos = frames_to_bytes(runtime, runtime->control->appl_ptr); + ssize_t buf_size = frames_to_bytes(runtime, runtime->buffer_size); + int rc; + + spin_lock_irqsave(&queue->lock, flags); + spin_lock(&vss->lock); + + ssize_t bytes = (appl_pos - vss->appl_ptr) % buf_size; + + rc = virtsnd_pcm_msg_send(vss, vss->appl_ptr % buf_size, bytes); + vss->appl_ptr += bytes; + + spin_unlock(&vss->lock); + spin_unlock_irqrestore(&queue->lock, flags); + return rc; +} + /* PCM substream operators map. */ const struct snd_pcm_ops virtsnd_pcm_ops = { .open = virtsnd_pcm_open, @@ -461,4 +484,5 @@ const struct snd_pcm_ops virtsnd_pcm_ops = { .trigger = virtsnd_pcm_trigger, .sync_stop = virtsnd_pcm_sync_stop, .pointer = virtsnd_pcm_pointer, + .ack = virtsnd_pcm_ack, }; base-commit: 8a749fd1a8720d4619c91c8b6e7528c0a355c0aa -- 2.41.0

3 5

[PATCH 1/2] ASoC: dt-bindings: nau8821: Add DMIC slew rate selection
by Seven Lee 24 Oct '23

24 Oct '23

Add input with DMIC slew rate selection Signed-off-by: Seven Lee <wtli(a)nuvoton.com> --- .../devicetree/bindings/sound/nuvoton,nau8821.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml index 3e54abd4ca74..5f7f2eed4834 100644 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -89,6 +89,12 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 default: 3072000 + nuvoton,dmic-slew-rate-selection: + description: number from 0 to 7 that sets DMIC slew rate. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + nuvoton,left-input-single-end: description: Enable left input with single-ended settings if set. For the headset mic application, the single-ended control is @@ -127,6 +133,7 @@ examples: nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <0>; nuvoton,dmic-clk-threshold = <3072000>; + nuvoton,dmic-slew-rate-selection= <0>; #sound-dai-cells = <0>; }; }; -- 2.25.1

3 3

[PATCH v2] ALSA: virtio: use copy and fill_silence callbacks
by Matias Ezequiel Vara Larsen 24 Oct '23

24 Oct '23

This commit replaces the mmap mechanism with the copy() and fill_silence() callbacks for both capturing and playback for the virtio-sound driver. This change is required to prevent the updating of the content of a buffer that is already in the available ring. The current mechanism splits a dma buffer into descriptors that are exposed to the device. This dma buffer is shared with the user application. When the device consumes a buffer, the driver moves the request from the used ring to available ring. The driver exposes the buffer to the device without knowing if the content has been updated from the user. The section 2.8.21.1 of the virtio spec states that: "The device MAY access the descriptor chains the driver created and the memory they refer to immediately". If the device picks up buffers from the available ring just after it is notified, it happens that the content may be old. By providing the copy() callback, the driver first updates the content of the buffer, and then, exposes the buffer to the device by enqueuing it in the available ring. Thus, device always picks up a buffer that is updated. During copy(), the number of requests enqueued depends on the "pos" and "bytes" arguments. The length of each request is period_size bytes. For capturing, the driver starts by exposing all the available buffers to device. After device updates the content of a buffer, it enqueues it in the used ring. It is only after the copy() for capturing is issued that the driver re-enqueues the buffer in the available ring. Co-developed-by: Anton Yakovlev <anton.yakovlev(a)opensynergy.com> Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar(a)redhat.com> --- Changelog: v1 -> v2: * Use snd_pcm_set_managed_buffer_all()for buffer allocation/freeing. * Make virtsnd_pcm_msg_send() generic by specifying the offset and size for the modified part of the buffer; this way no assumptions need to be made. * Disable SNDRV_PCM_INFO_NO_REWINDS since now only sequential reading/writing of frames is supported. * Correct comment at virtsnd_pcm_msg_send(). * v1 patch at: https://lore.kernel.org/lkml/20231016151000.GE119987@fedora/t/ sound/virtio/virtio_pcm.c | 7 ++- sound/virtio/virtio_pcm.h | 9 ++-- sound/virtio/virtio_pcm_msg.c | 93 ++++++++++++++++++++++------------- sound/virtio/virtio_pcm_ops.c | 81 +++++++++++++++++++++++++----- 4 files changed, 137 insertions(+), 53 deletions(-) diff --git a/sound/virtio/virtio_pcm.c b/sound/virtio/virtio_pcm.c index c10d91fff2fb..66d67eef1bcc 100644 --- a/sound/virtio/virtio_pcm.c +++ b/sound/virtio/virtio_pcm.c @@ -104,12 +104,11 @@ static int virtsnd_pcm_build_hw(struct virtio_pcm_substream *vss, * only message-based transport. */ vss->hw.info = - SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE; + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_NO_REWINDS; if (!info->channels_min || info->channels_min > info->channels_max) { dev_err(&vdev->dev, @@ -471,7 +470,7 @@ int virtsnd_pcm_build_devs(struct virtio_snd *snd) for (kss = ks->substream; kss; kss = kss->next) vs->substreams[kss->number]->substream = kss; - snd_pcm_set_ops(vpcm->pcm, i, &virtsnd_pcm_ops); + snd_pcm_set_ops(vpcm->pcm, i, &virtsnd_pcm_ops[i]); } snd_pcm_set_managed_buffer_all(vpcm->pcm, diff --git a/sound/virtio/virtio_pcm.h b/sound/virtio/virtio_pcm.h index 062eb8e8f2cf..8b42928a8e01 100644 --- a/sound/virtio/virtio_pcm.h +++ b/sound/virtio/virtio_pcm.h @@ -57,7 +57,6 @@ struct virtio_pcm_substream { bool suspended; struct virtio_pcm_msg **msgs; unsigned int nmsgs; - int msg_last_enqueued; unsigned int msg_count; wait_queue_head_t msg_empty; }; @@ -90,7 +89,7 @@ struct virtio_pcm { struct virtio_pcm_stream streams[SNDRV_PCM_STREAM_LAST + 1]; }; -extern const struct snd_pcm_ops virtsnd_pcm_ops; +extern const struct snd_pcm_ops virtsnd_pcm_ops[]; int virtsnd_pcm_validate(struct virtio_device *vdev); @@ -117,7 +116,11 @@ int virtsnd_pcm_msg_alloc(struct virtio_pcm_substream *vss, void virtsnd_pcm_msg_free(struct virtio_pcm_substream *vss); -int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss); +int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss, unsigned long offset, + unsigned long bytes); + +int virtsnd_pcm_msg_send_locked(struct virtio_pcm_substream *vss, + unsigned long offset, unsigned long bytes); unsigned int virtsnd_pcm_msg_pending_num(struct virtio_pcm_substream *vss); diff --git a/sound/virtio/virtio_pcm_msg.c b/sound/virtio/virtio_pcm_msg.c index aca2dc1989ba..c3d471088d9e 100644 --- a/sound/virtio/virtio_pcm_msg.c +++ b/sound/virtio/virtio_pcm_msg.c @@ -155,7 +155,6 @@ int virtsnd_pcm_msg_alloc(struct virtio_pcm_substream *vss, sizeof(msg->xfer)); sg_init_one(&msg->sgs[PCM_MSG_SG_STATUS], &msg->status, sizeof(msg->status)); - msg->length = period_bytes; virtsnd_pcm_sg_from(&msg->sgs[PCM_MSG_SG_DATA], sg_num, data, period_bytes); @@ -189,58 +188,70 @@ void virtsnd_pcm_msg_free(struct virtio_pcm_substream *vss) * * All messages are organized in an ordered circular list. Each time the * function is called, all currently non-enqueued messages are added to the - * virtqueue. For this, the function keeps track of two values: - * - * msg_last_enqueued = index of the last enqueued message, - * msg_count = # of pending messages in the virtqueue. + * virtqueue. For this, the function uses offset and bytes to calculate the + * messages that need to be added. * * Context: Any context. Expects the tx/rx queue and the VirtIO substream * spinlocks to be held by caller. * Return: 0 on success, -errno on failure. */ -int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss) +int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss, unsigned long offset, + unsigned long bytes) { - struct snd_pcm_runtime *runtime = vss->substream->runtime; struct virtio_snd *snd = vss->snd; struct virtio_device *vdev = snd->vdev; struct virtqueue *vqueue = virtsnd_pcm_queue(vss)->vqueue; - int i; - int n; + unsigned long period_bytes = snd_pcm_lib_period_bytes(vss->substream); + unsigned long start, end, i; + unsigned int msg_count = vss->msg_count; bool notify = false; + int rc; - i = (vss->msg_last_enqueued + 1) % runtime->periods; - n = runtime->periods - vss->msg_count; + start = offset / period_bytes; + end = (offset + bytes - 1) / period_bytes; - for (; n; --n, i = (i + 1) % runtime->periods) { + for (i = start; i <= end; i++) { struct virtio_pcm_msg *msg = vss->msgs[i]; struct scatterlist *psgs[] = { &msg->sgs[PCM_MSG_SG_XFER], &msg->sgs[PCM_MSG_SG_DATA], &msg->sgs[PCM_MSG_SG_STATUS] }; - int rc; - - msg->xfer.stream_id = cpu_to_le32(vss->sid); - memset(&msg->status, 0, sizeof(msg->status)); - - if (vss->direction == SNDRV_PCM_STREAM_PLAYBACK) - rc = virtqueue_add_sgs(vqueue, psgs, 2, 1, msg, - GFP_ATOMIC); - else - rc = virtqueue_add_sgs(vqueue, psgs, 1, 2, msg, - GFP_ATOMIC); - - if (rc) { - dev_err(&vdev->dev, - "SID %u: failed to send I/O message\n", - vss->sid); - return rc; + unsigned long n; + + n = period_bytes - (offset % period_bytes); + if (n > bytes) + n = bytes; + + msg->length += n; + if (msg->length == period_bytes) { + msg->xfer.stream_id = cpu_to_le32(vss->sid); + memset(&msg->status, 0, sizeof(msg->status)); + + if (vss->direction == SNDRV_PCM_STREAM_PLAYBACK) + rc = virtqueue_add_sgs(vqueue, psgs, 2, 1, msg, + GFP_ATOMIC); + else + rc = virtqueue_add_sgs(vqueue, psgs, 1, 2, msg, + GFP_ATOMIC); + + if (rc) { + dev_err(&vdev->dev, + "SID %u: failed to send I/O message\n", + vss->sid); + return rc; + } + + vss->msg_count++; } - vss->msg_last_enqueued = i; - vss->msg_count++; + offset = 0; + bytes -= n; } + if (msg_count == vss->msg_count) + return 0; + if (!(vss->features & (1U << VIRTIO_SND_PCM_F_MSG_POLLING))) notify = virtqueue_kick_prepare(vqueue); @@ -250,6 +261,22 @@ int virtsnd_pcm_msg_send(struct virtio_pcm_substream *vss) return 0; } +int virtsnd_pcm_msg_send_locked(struct virtio_pcm_substream *vss, + unsigned long offset, unsigned long bytes) +{ + struct virtio_snd_queue *queue = virtsnd_pcm_queue(vss); + unsigned long flags; + int rc; + + spin_lock_irqsave(&queue->lock, flags); + spin_lock(&vss->lock); + rc = virtsnd_pcm_msg_send(vss, offset, bytes); + spin_unlock(&vss->lock); + spin_unlock_irqrestore(&queue->lock, flags); + + return rc; +} + /** * virtsnd_pcm_msg_pending_num() - Returns the number of pending I/O messages. * @vss: VirtIO substream. @@ -309,6 +336,8 @@ static void virtsnd_pcm_msg_complete(struct virtio_pcm_msg *msg, if (vss->hw_ptr >= vss->buffer_bytes) vss->hw_ptr -= vss->buffer_bytes; + msg->length = 0; + vss->xfer_xrun = false; vss->msg_count--; @@ -320,8 +349,6 @@ static void virtsnd_pcm_msg_complete(struct virtio_pcm_msg *msg, le32_to_cpu(msg->status.latency_bytes)); schedule_work(&vss->elapsed_period); - - virtsnd_pcm_msg_send(vss); } else if (!vss->msg_count) { wake_up_all(&vss->msg_empty); } diff --git a/sound/virtio/virtio_pcm_ops.c b/sound/virtio/virtio_pcm_ops.c index f8bfb87624be..4569b285f520 100644 --- a/sound/virtio/virtio_pcm_ops.c +++ b/sound/virtio/virtio_pcm_ops.c @@ -282,7 +282,6 @@ static int virtsnd_pcm_prepare(struct snd_pcm_substream *substream) vss->buffer_bytes = snd_pcm_lib_buffer_bytes(substream); vss->hw_ptr = 0; - vss->msg_last_enqueued = -1; } else { struct snd_pcm_runtime *runtime = substream->runtime; unsigned int buffer_bytes = snd_pcm_lib_buffer_bytes(substream); @@ -324,7 +323,7 @@ static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command) struct virtio_snd_queue *queue; struct virtio_snd_msg *msg; unsigned long flags; - int rc; + int rc = 0; switch (command) { case SNDRV_PCM_TRIGGER_START: @@ -333,7 +332,8 @@ static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command) spin_lock_irqsave(&queue->lock, flags); spin_lock(&vss->lock); - rc = virtsnd_pcm_msg_send(vss); + if (vss->direction == SNDRV_PCM_STREAM_CAPTURE) + rc = virtsnd_pcm_msg_send(vss, 0, vss->buffer_bytes); if (!rc) vss->xfer_enabled = true; spin_unlock(&vss->lock); @@ -450,15 +450,70 @@ virtsnd_pcm_pointer(struct snd_pcm_substream *substream) return hw_ptr; } +static int virtsnd_pcm_pb_silence(struct snd_pcm_substream *substream, + int channel, unsigned long pos, + unsigned long bytes) +{ + struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + snd_pcm_format_set_silence(runtime->format, runtime->dma_area + pos, + bytes_to_samples(runtime, bytes)); + + return virtsnd_pcm_msg_send_locked(vss, pos, bytes); +} + +static int virtsnd_pcm_pb_copy(struct snd_pcm_substream *substream, int channel, + unsigned long pos, struct iov_iter *iter, + unsigned long bytes) +{ + struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + if (copy_from_iter(runtime->dma_area + pos, bytes, iter) != bytes) + return -EFAULT; + + return virtsnd_pcm_msg_send_locked(vss, pos, bytes); +} + +static int virtsnd_pcm_cp_copy(struct snd_pcm_substream *substream, int channel, + unsigned long pos, struct iov_iter *iter, + unsigned long bytes) +{ + struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + if (copy_to_iter(runtime->dma_area + pos, bytes, iter) != bytes) + return -EFAULT; + + return virtsnd_pcm_msg_send_locked(vss, pos, bytes); +} + /* PCM substream operators map. */ -const struct snd_pcm_ops virtsnd_pcm_ops = { - .open = virtsnd_pcm_open, - .close = virtsnd_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = virtsnd_pcm_hw_params, - .hw_free = virtsnd_pcm_hw_free, - .prepare = virtsnd_pcm_prepare, - .trigger = virtsnd_pcm_trigger, - .sync_stop = virtsnd_pcm_sync_stop, - .pointer = virtsnd_pcm_pointer, +const struct snd_pcm_ops virtsnd_pcm_ops[] = { + { + .open = virtsnd_pcm_open, + .close = virtsnd_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = virtsnd_pcm_hw_params, + .hw_free = virtsnd_pcm_hw_free, + .prepare = virtsnd_pcm_prepare, + .trigger = virtsnd_pcm_trigger, + .sync_stop = virtsnd_pcm_sync_stop, + .pointer = virtsnd_pcm_pointer, + .copy = virtsnd_pcm_pb_copy, + .fill_silence = virtsnd_pcm_pb_silence, + }, + { + .open = virtsnd_pcm_open, + .close = virtsnd_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = virtsnd_pcm_hw_params, + .hw_free = virtsnd_pcm_hw_free, + .prepare = virtsnd_pcm_prepare, + .trigger = virtsnd_pcm_trigger, + .sync_stop = virtsnd_pcm_sync_stop, + .pointer = virtsnd_pcm_pointer, + .copy = virtsnd_pcm_cp_copy, + }, }; base-commit: 8a749fd1a8720d4619c91c8b6e7528c0a355c0aa -- 2.41.0

4 7

Add UCM2 configuration for Topping DX3 Pro+
by GitHub pull_request - opened 24 Oct '23

24 Oct '23

alsa-project/alsa-ucm-conf pull request #362 was opened from ZVNexus: Fixes it showing up as "digital" and "analog" output in Settings, should just be "Headphones". Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/362 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/362.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH for-next] ASoC: SOF: Make return of remove_late void, too
by Takashi Iwai 23 Oct '23

23 Oct '23

Like the change we've done for remove callback, the newly introduced remove_late callback should be changed to void return, too. Fixes: 17baaa1f950b ("ASoC: SOF: core: Add probe_early and remove_late callbacks") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- @Mark, as this is based on a merge result, I'm going to apply it to for-next branch of my sound git tree. Please pull onto yours later. sound/soc/sof/intel/hda.c | 4 +--- sound/soc/sof/intel/hda.h | 2 +- sound/soc/sof/ops.h | 6 ++---- sound/soc/sof/sof-priv.h | 2 +- 4 files changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 8342fcf52f52..744c0dd5766d 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1382,13 +1382,11 @@ void hda_dsp_remove(struct snd_sof_dev *sdev) iounmap(sdev->bar[HDA_DSP_BAR]); } -int hda_dsp_remove_late(struct snd_sof_dev *sdev) +void hda_dsp_remove_late(struct snd_sof_dev *sdev) { iounmap(sof_to_bus(sdev)->remap_addr); sof_hda_bus_exit(sdev); hda_codec_i915_exit(sdev); - - return 0; } int hda_power_down_dsp(struct snd_sof_dev *sdev) diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h index f57a9a4b0b75..d628d6a3a7e5 100644 --- a/sound/soc/sof/intel/hda.h +++ b/sound/soc/sof/intel/hda.h @@ -579,7 +579,7 @@ struct sof_intel_hda_stream { int hda_dsp_probe_early(struct snd_sof_dev *sdev); int hda_dsp_probe(struct snd_sof_dev *sdev); void hda_dsp_remove(struct snd_sof_dev *sdev); -int hda_dsp_remove_late(struct snd_sof_dev *sdev); +void hda_dsp_remove_late(struct snd_sof_dev *sdev); int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask); int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask); int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask); diff --git a/sound/soc/sof/ops.h b/sound/soc/sof/ops.h index 09d1452e3705..6538d9f4fe96 100644 --- a/sound/soc/sof/ops.h +++ b/sound/soc/sof/ops.h @@ -57,12 +57,10 @@ static inline void snd_sof_remove(struct snd_sof_dev *sdev) sof_ops(sdev)->remove(sdev); } -static inline int snd_sof_remove_late(struct snd_sof_dev *sdev) +static inline void snd_sof_remove_late(struct snd_sof_dev *sdev) { if (sof_ops(sdev)->remove_late) - return sof_ops(sdev)->remove_late(sdev); - - return 0; + sof_ops(sdev)->remove_late(sdev); } static inline int snd_sof_shutdown(struct snd_sof_dev *sdev) diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h index f712bd39d13d..f4185012eb69 100644 --- a/sound/soc/sof/sof-priv.h +++ b/sound/soc/sof/sof-priv.h @@ -168,7 +168,7 @@ struct snd_sof_dsp_ops { int (*probe_early)(struct snd_sof_dev *sof_dev); /* optional */ int (*probe)(struct snd_sof_dev *sof_dev); /* mandatory */ void (*remove)(struct snd_sof_dev *sof_dev); /* optional */ - int (*remove_late)(struct snd_sof_dev *sof_dev); /* optional */ + void (*remove_late)(struct snd_sof_dev *sof_dev); /* optional */ int (*shutdown)(struct snd_sof_dev *sof_dev); /* optional */ /* DSP core boot / reset */ base-commit: 41a3056e4e73172d09dad6921e70d0f04b57cdf0 -- 2.35.3

2 1

[PATCH 1/2] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add WSA2 audio ports IDs
by Krzysztof Kozlowski 23 Oct '23

23 Oct '23

Add defines for audio ports used on Qualcomm WSA2 LPASS (Low Power Audio SubSystem). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h index 39f203256c4f..c5ea35abf129 100644 --- a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h +++ b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h @@ -139,6 +139,11 @@ #define DISPLAY_PORT_RX_5 133 #define DISPLAY_PORT_RX_6 134 #define DISPLAY_PORT_RX_7 135 +#define WSA2_CODEC_DMA_RX_0 136 +#define WSA2_CODEC_DMA_TX_0 137 +#define WSA2_CODEC_DMA_RX_1 138 +#define WSA2_CODEC_DMA_TX_1 139 +#define WSA2_CODEC_DMA_TX_2 140 #define LPASS_CLK_ID_PRI_MI2S_IBIT 1 #define LPASS_CLK_ID_PRI_MI2S_EBIT 2 -- 2.34.1

3 5