January 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/3] Add the Renesas IDT821034 codec support
by Herve Codina 31 Jan '23

31 Jan '23

Hi, The Renesas IDT821034 codec is four channel PCM codec with on-chip filters and programmable gain setting. It also provides SLIC (Subscriber Line Interface Circuit) signals as GPIOs. Based on previous iteration, https://lore.kernel.org/linux-kernel/20230120095036.514639-1-herve.codina@b… this v3 series mainly: - Fixes _put() methods - Introduces and uses idt821034_2x8bit_write() - Removes the '#if IS_ENABLED(CONFIG_GPIOLIB)' conditional Best regards, Herve Codina Changes v2 -> v3: - Patch 1 Fix the example node name. Add 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>' - Patch 2 Fix _put() methods return code. Remove 'select REGMAP_SPI' from Kconfig Introduce and use idt821034_2x8bit_write() Remove the '#if IS_ENABLED(CONFIG_GPIOLIB)' conditional Fix comments and other minor code simplifications Changes v1 -> v2: - All patches Reformat commit log - Patch 1 Remove '$ref: /schemas/gpio/gpio.yaml#' Use 'unevaluatedProperties: false' Update the node name and remove the sound node in the example - Patch 2 Change the file header comment format Rework in order to remove the regmap virtual registers Herve Codina (3): dt-bindings: sound: Add Renesas IDT821034 codec ASoC: codecs: Add support for the Renesas IDT821034 codec MAINTAINERS: add the Renesas IDT821034 codec entry .../bindings/sound/renesas,idt821034.yaml | 75 ++ MAINTAINERS | 7 + sound/soc/codecs/Kconfig | 11 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/idt821034.c | 1180 +++++++++++++++++ 5 files changed, 1275 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/renesas,idt821034.yaml create mode 100644 sound/soc/codecs/idt821034.c -- 2.39.0

2 4

[PATCH 0/8] ASoC: mchp-spdifrx: add runtime PM support and fixes
by Claudiu Beznea 31 Jan '23

31 Jan '23

Hi, This series adds runtime PM support for Microchip SPDIFRX driver. Along with it I added few fixes identified while going though the code and playing with Microchip SPDIFRX controller. Thank you, Claudiu Beznea Claudiu Beznea (8): ASoC: mchp-spdifrx: fix controls which rely on rsr register ASoC: mchp-spdifrx: fix return value in case completion times out ASoC: mchp-spdifrx: fix controls that works with completion mechanism ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() ASoC: mchp-spdifrx: use unsigned long to store clk_get_rate() value ASoC: mchp-spdifrx: remove struct mchp_spdifrx_dev::fmt member ASoC: mchp-spdifrx: add runtime pm support ASoC: mchp-spdifrx: document data structures sound/soc/atmel/mchp-spdifrx.c | 552 ++++++++++++++++++++++++--------- 1 file changed, 403 insertions(+), 149 deletions(-) -- 2.34.1

2 9

[PATCH v2 0/4] soundwire: better error handling in deferred transfers
by Bard Liao 31 Jan '23

31 Jan '23

This is a generic cleanup series. v2: - Remove the "soundwire: stream: uniquify dev_err() logs" patch Pierre-Louis Bossart (4): soundwire: stream: use consistent pattern for freeing buffers soundwire: bus: remove sdw_defer argument in sdw_transfer_defer() soundwire: cadence: use directly bus sdw_defer structure soundwire: cadence: further simplify low-level xfer_msg_defer() callback drivers/soundwire/bus.c | 12 +++++------- drivers/soundwire/bus.h | 3 +-- drivers/soundwire/cadence_master.c | 20 ++++++++++---------- drivers/soundwire/cadence_master.h | 5 +---- drivers/soundwire/stream.c | 8 ++++---- include/linux/soundwire/sdw.h | 6 +++--- 6 files changed, 24 insertions(+), 30 deletions(-) -- 2.25.1

2 5

[PATCH v2 0/2] soundwire: Remove redundant zeroing of page registers
by Richard Fitzgerald 31 Jan '23

31 Jan '23

Writing zero to the page registers after each message transaction can add up to a lot of overhead for codecs that need to transfer large amount of data - for example a firmware download. There's no spec reason I can see for this zeroing. The page registers are only used for a paged address. The bus code uses a non-paged address for registers in page 0. It always writes the page registers at the start of a paged transaction. If this zeroing was a workaround for anything, let me know and I will re-implement the zeroing as a quirk that can be enabled only when it is necessary. Changes since v1: - Reworded the commit message to patch #1: - say that this is for devices that support paging - mention bit 15 as the paging flag - split a long sentence into two sentences. No code changes. Richard Fitzgerald (2): soundwire: bus: Don't zero page registers after every transaction soundwire: bus: Remove unused reset_page_addr() callback drivers/soundwire/bus.c | 23 ----------------------- drivers/soundwire/cadence_master.c | 14 -------------- drivers/soundwire/cadence_master.h | 3 --- drivers/soundwire/intel_auxdevice.c | 1 - include/linux/soundwire/sdw.h | 3 --- 5 files changed, 44 deletions(-) -- 2.30.2

2 3

[PATCH v2] soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
by Richard Fitzgerald 31 Jan '23

31 Jan '23

Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks. Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on. During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation. During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe(). It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing. All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions. Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed. Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson #1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> #4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> #3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> #2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> #1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson #1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK> Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- Changes since V1: Only changes are to the commit message - Rewrite to try to make the explanation clearer - Include a sample lockdep assert --- drivers/soundwire/bus_type.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 04b3529f8929..963498db0fd2 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -105,20 +105,19 @@ static int sdw_drv_probe(struct device *dev) if (ret) return ret; - mutex_lock(&slave->sdw_dev_lock); - ret = drv->probe(slave, id); if (ret) { name = drv->name; if (!name) name = drv->driver.name; - mutex_unlock(&slave->sdw_dev_lock); dev_err(dev, "Probe of %s failed: %d\n", name, ret); dev_pm_domain_detach(dev, false); return ret; } + mutex_lock(&slave->sdw_dev_lock); + /* device is probed so let's read the properties now */ if (drv->ops && drv->ops->read_prop) drv->ops->read_prop(slave); @@ -167,14 +166,12 @@ static int sdw_drv_remove(struct device *dev) int ret = 0; mutex_lock(&slave->sdw_dev_lock); - slave->probed = false; + mutex_unlock(&slave->sdw_dev_lock); if (drv->remove) ret = drv->remove(slave); - mutex_unlock(&slave->sdw_dev_lock); - dev_pm_domain_detach(dev, false); return ret; -- 2.30.2

3 2

[PATCH] ASoC: nau8821: Implement DRC controls
by Seven Lee 31 Jan '23

31 Jan '23

This patch is support dynamic range compression controls. Signed-off-by: Seven Lee <scott6986(a)gmail.com> --- sound/soc/codecs/nau8821.c | 96 ++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/nau8821.h | 23 +++++++++ 2 files changed, 119 insertions(+) diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c index 4a72b94e8410..fee970427a24 100644 --- a/sound/soc/codecs/nau8821.c +++ b/sound/soc/codecs/nau8821.c @@ -322,12 +322,92 @@ static const struct soc_enum nau8821_dac_oversampl_enum = SOC_ENUM_SINGLE(NAU8821_R2C_DAC_CTRL1, NAU8821_DAC_OVERSAMPLE_SFT, ARRAY_SIZE(nau8821_dac_oversampl), nau8821_dac_oversampl); +static const char * const nau8821_adc_drc_noise_gate[] = { + "1:1", "2:1", "4:1", "8:1" }; + +static const struct soc_enum nau8821_adc_drc_noise_gate_enum = + SOC_ENUM_SINGLE(NAU8821_R38_ADC_DRC_SLOPES, NAU8821_DRC_NG_SLP_ADC_SFT, + ARRAY_SIZE(nau8821_adc_drc_noise_gate), + nau8821_adc_drc_noise_gate); + +static const char * const nau8821_adc_drc_expansion_slope[] = { + "1:1", "2:1", "4:1" }; + +static const struct soc_enum nau8821_adc_drc_expansion_slope_enum = + SOC_ENUM_SINGLE(NAU8821_R38_ADC_DRC_SLOPES, NAU8821_DRC_EXP_SLP_ADC_SFT, + ARRAY_SIZE(nau8821_adc_drc_expansion_slope), + nau8821_adc_drc_expansion_slope); + +static const char * const nau8821_adc_drc_lower_region[] = { + "0", "1:2", "1:4", "1:8", "1:16", "", "", "1:1" }; + +static const struct soc_enum nau8821_adc_drc_lower_region_enum = + SOC_ENUM_SINGLE(NAU8821_R38_ADC_DRC_SLOPES, + NAU8821_DRC_CMP2_SLP_ADC_SFT, + ARRAY_SIZE(nau8821_adc_drc_lower_region), + nau8821_adc_drc_lower_region); + +static const char * const nau8821_higher_region[] = { + "0", "1:2", "1:4", "1:8", "1:16", "", "", "1:1" }; + +static const struct soc_enum nau8821_higher_region_enum = + SOC_ENUM_SINGLE(NAU8821_R38_ADC_DRC_SLOPES, + NAU8821_DRC_CMP1_SLP_ADC_SFT, + ARRAY_SIZE(nau8821_higher_region), + nau8821_higher_region); + +static const char * const nau8821_limiter_slope[] = { + "0", "1:2", "1:4", "1:8", "1:16", "1:32", "1:64", "1:1" }; + +static const struct soc_enum nau8821_limiter_slope_enum = + SOC_ENUM_SINGLE(NAU8821_R38_ADC_DRC_SLOPES, + NAU8821_DRC_LMT_SLP_ADC_SFT, ARRAY_SIZE(nau8821_limiter_slope), + nau8821_limiter_slope); + +static const char * const nau8821_detection_attack_time[] = { + "Ts", "3Ts", "7Ts", "15Ts", "31Ts", "63Ts", "127Ts", "255Ts", + "", "511Ts" }; + +static const struct soc_enum nau8821_detection_attack_time_enum = + SOC_ENUM_SINGLE(NAU8821_R39_ADC_DRC_ATKDCY, + NAU8821_DRC_PK_COEF1_ADC_SFT, + ARRAY_SIZE(nau8821_detection_attack_time), + nau8821_detection_attack_time); + +static const char * const nau8821_detection_release_time[] = { + "63Ts", "127Ts", "255Ts", "511Ts", "1023Ts", "2047Ts", "4095Ts", + "8191Ts", "", "16383Ts" }; + +static const struct soc_enum nau8821_detection_release_time_enum = + SOC_ENUM_SINGLE(NAU8821_R39_ADC_DRC_ATKDCY, + NAU8821_DRC_PK_COEF2_ADC_SFT, + ARRAY_SIZE(nau8821_detection_release_time), + nau8821_detection_release_time); + +static const char * const nau8821_attack_time[] = { + "Ts", "3Ts", "7Ts", "15Ts", "31Ts", "63Ts", "127Ts", "255Ts", + "511Ts", "1023Ts", "2047Ts", "4095Ts", "8191Ts" }; + +static const struct soc_enum nau8821_attack_time_enum = + SOC_ENUM_SINGLE(NAU8821_R39_ADC_DRC_ATKDCY, NAU8821_DRC_ATK_ADC_SFT, + ARRAY_SIZE(nau8821_attack_time), nau8821_attack_time); + +static const char * const nau8821_decay_time[] = { + "63Ts", "127Ts", "255Ts", "511Ts", "1023Ts", "2047Ts", "4095Ts", + "8191Ts", "16383Ts", "32757Ts", "65535Ts" }; + +static const struct soc_enum nau8821_decay_time_enum = + SOC_ENUM_SINGLE(NAU8821_R39_ADC_DRC_ATKDCY, NAU8821_DRC_DCY_ADC_SFT, + ARRAY_SIZE(nau8821_decay_time), nau8821_decay_time); + static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -6600, 2400); static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0); static const DECLARE_TLV_DB_MINMAX(hp_vol_tlv, -900, 0); static const DECLARE_TLV_DB_SCALE(playback_vol_tlv, -6600, 50, 1); static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600); static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -7000, 2400); +static const DECLARE_TLV_DB_MINMAX(drc_knee4_tlv, -9800, -3500); +static const DECLARE_TLV_DB_MINMAX(drc_knee3_tlv, -8100, -1800); static const struct snd_kcontrol_new nau8821_controls[] = { SOC_DOUBLE_TLV("Mic Volume", NAU8821_R35_ADC_DGAIN_CTRL1, @@ -346,6 +426,22 @@ static const struct snd_kcontrol_new nau8821_controls[] = { SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8821_R2F_DAC_DGAIN_CTRL, 0, 8, 0xff, 0, crosstalk_vol_tlv), + SOC_SINGLE_TLV("ADC DRC KNEE4", NAU8821_R37_ADC_DRC_KNEE_IP34, + NAU8821_DRC_KNEE4_IP_ADC_SFT, 0x3f, 1, drc_knee4_tlv), + SOC_SINGLE_TLV("ADC DRC KNEE3", NAU8821_R37_ADC_DRC_KNEE_IP34, + NAU8821_DRC_KNEE3_IP_ADC_SFT, 0x3f, 1, drc_knee3_tlv), + + SOC_ENUM("ADC DRC Noise Gate", nau8821_adc_drc_noise_gate_enum), + SOC_ENUM("ADC DRC Expansion Slope", nau8821_adc_drc_expansion_slope_enum), + SOC_ENUM("ADC DRC Lower Region", nau8821_adc_drc_lower_region_enum), + SOC_ENUM("ADC DRC Higher Region", nau8821_higher_region_enum), + SOC_ENUM("ADC DRC Limiter Slope", nau8821_limiter_slope_enum), + SOC_ENUM("ADC DRC Peak Detection Attack Time", nau8821_detection_attack_time_enum), + SOC_ENUM("ADC DRC Peak Detection Release Time", nau8821_detection_release_time_enum), + SOC_ENUM("ADC DRC Attack Time", nau8821_attack_time_enum), + SOC_ENUM("ADC DRC Decay Time", nau8821_decay_time_enum), + SOC_SINGLE("DRC Enable Switch", NAU8821_R36_ADC_DRC_KNEE_IP12, + NAU8821_DRC_ENA_ADC_SFT, 1, 0), SOC_ENUM("ADC Decimation Rate", nau8821_adc_decimation_enum), SOC_ENUM("DAC Oversampling Rate", nau8821_dac_oversampl_enum), diff --git a/sound/soc/codecs/nau8821.h b/sound/soc/codecs/nau8821.h index c44251f54d48..d962293c218e 100644 --- a/sound/soc/codecs/nau8821.h +++ b/sound/soc/codecs/nau8821.h @@ -350,6 +350,29 @@ #define NAU8821_ADCL_CH_VOL_SFT 0 #define NAU8821_ADCL_CH_VOL_MASK 0xff +/* ADC_DRC_KNEE_IP12 (0x36) */ +#define NAU8821_DRC_ENA_ADC_SFT 15 +#define NAU8821_DRC_ENA_ADC_EN (0x1 << NAU8821_DRC_ENA_ADC_SFT) + +/* ADC_DRC_KNEE_IP34 (0x37) */ +#define NAU8821_DRC_KNEE4_IP_ADC_SFT 8 +#define NAU8821_DRC_KNEE4_IP_ADC_MASK (0xff << NAU8821_DRC_KNEE4_IP_ADC_SFT) +#define NAU8821_DRC_KNEE3_IP_ADC_SFT 0 +#define NAU8821_DRC_KNEE3_IP_ADC_MASK 0xff + +/* ADC_DRC_SLOPES (0x38) */ +#define NAU8821_DRC_NG_SLP_ADC_SFT 12 +#define NAU8821_DRC_EXP_SLP_ADC_SFT 9 +#define NAU8821_DRC_CMP2_SLP_ADC_SFT 6 +#define NAU8821_DRC_CMP1_SLP_ADC_SFT 3 +#define NAU8821_DRC_LMT_SLP_ADC_SFT 0 + +/* ADC_DRC_ATKDCY (0x39) */ +#define NAU8821_DRC_PK_COEF1_ADC_SFT 12 +#define NAU8821_DRC_PK_COEF2_ADC_SFT 8 +#define NAU8821_DRC_ATK_ADC_SFT 4 +#define NAU8821_DRC_DCY_ADC_SFT 0 + /* BIQ1_COF10 (0x4a) */ #define NAU8821_BIQ1_DAC_EN_SFT 3 #define NAU8821_BIQ1_DAC_EN_EN (0x1 << NAU8821_BIQ1_DAC_EN_SFT) -- 2.30.2

1 0

[PATCH] [RFC] ALSA: hda: Fix the control element identification for multiple codecs
by Jaroslav Kysela 31 Jan '23

31 Jan '23

[This is a RFC for the discussion] Some motherboards have multiple HDA codecs connected to the serial bus. The current code may create multiple mixer controls with the almost identical identification. The current code use id.device field from the control element structure to store the codec address to avoid such clashes for multiple codecs. Unfortunately, the user space do not handle this correctly. For mixer controls, only name and index are used for the identifiers. This patch fixes this problem to compose the index using the codec address as an offset in case, when the control already exists. It is really unlikely that one codec will create 10 similar controls. This patch adds new kernel module parameter 'ctl_dev_id' to allow select the old behaviour, too. BugLink: https://github.com/alsa-project/alsa-lib/issues/294 BugLink: https://github.com/alsa-project/alsa-lib/issues/205 Fixes: 54d174031576 ("[ALSA] hda-codec - Fix connection list parsing") Fixes: 1afe206ab699 ("ALSA: hda - Try to find an empty control index when it's occupied") Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> -- Discussion: There are several possibilities to handle the old behaviour - a kernel module parameter (proposed), a kernel configuration option or drop the old behaviour completely. --- include/sound/hda_codec.h | 1 + sound/pci/hda/hda_codec.c | 13 ++++++++++--- sound/pci/hda/hda_controller.c | 1 + sound/pci/hda/hda_controller.h | 1 + sound/pci/hda/hda_intel.c | 5 +++++ 5 files changed, 18 insertions(+), 3 deletions(-) diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h index eba23daf2c29..bbb7805e85d8 100644 --- a/include/sound/hda_codec.h +++ b/include/sound/hda_codec.h @@ -259,6 +259,7 @@ struct hda_codec { unsigned int relaxed_resume:1; /* don't resume forcibly for jack */ unsigned int forced_resume:1; /* forced resume for jack */ unsigned int no_stream_clean_at_suspend:1; /* do not clean streams at suspend */ + unsigned int ctl_dev_id:1; /* old control element id build behaviour */ #ifdef CONFIG_PM unsigned long power_on_acct; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index edd653ece70d..8f20abc036bf 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3390,7 +3390,12 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, kctl = snd_ctl_new1(knew, codec); if (!kctl) return -ENOMEM; - if (addr > 0) + /* Do not use the id.device field for MIXER elements. + * This field is for real device numbers (like PCM) but codecs + * are hidden components from the user space view (unrelated + * to the mixer element identification). + */ + if (addr > 0 && codec->ctl_dev_id) kctl->id.device = addr; if (idx > 0) kctl->id.index = idx; @@ -3401,9 +3406,11 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, * the codec addr; if it still fails (or it's the * primary codec), then try another control index */ - if (!addr && codec->core.addr) + if (!addr && codec->core.addr) { addr = codec->core.addr; - else if (!idx && !knew->index) { + if (!codec->ctl_dev_id) + idx += 10 * addr; + } else if (!idx && !knew->index) { idx = find_empty_mixer_ctl_idx(codec, knew->name, 0); if (idx <= 0) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 0ff286b7b66b..083df287c1a4 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -1231,6 +1231,7 @@ int azx_probe_codecs(struct azx *chip, unsigned int max_slots) continue; codec->jackpoll_interval = chip->jackpoll_interval; codec->beep_mode = chip->beep_mode; + codec->ctl_dev_id = chip->ctl_dev_id; codecs++; } } diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index f5bf295eb830..8556031bcd68 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -124,6 +124,7 @@ struct azx { /* HD codec */ int codec_probe_mask; /* copied from probe_mask option */ unsigned int beep_mode; + bool ctl_dev_id; #ifdef CONFIG_SND_HDA_PATCH_LOADER const struct firmware *fw; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 87002670c0c9..2ef57dfa81f1 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -119,6 +119,7 @@ static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = CONFIG_SND_HDA_INPUT_BEEP_MODE}; #endif static bool dmic_detect = 1; +static bool ctl_dev_id[SNDRV_CARDS]; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for Intel HD audio interface."); @@ -157,6 +158,8 @@ module_param(dmic_detect, bool, 0444); MODULE_PARM_DESC(dmic_detect, "Allow DSP driver selection (bypass this driver) " "(0=off, 1=on) (default=1); " "deprecated, use snd-intel-dspcfg.dsp_driver option instead"); +module_param_array(ctl_dev_id, bool, NULL, 0444); +MODULE_PARM_DESC(ctl_dev_id, "Use control device identifier (based on codec address)."); #ifdef CONFIG_PM static int param_set_xint(const char *val, const struct kernel_param *kp); @@ -2278,6 +2281,8 @@ static int azx_probe_continue(struct azx *chip) chip->beep_mode = beep_mode[dev]; #endif + chip->ctl_dev_id = ctl_dev_id[dev]; + /* create codec instances */ if (bus->codec_mask) { err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]); -- 2.39.0

2 2

[PATCH RESEND] ALSA: doc: Fix PCM interface section typos
by Miquel Raynal 31 Jan '23

31 Jan '23

Fix two mistakes in the PCM interface section: 1/ Members of the snd_pcm_hardware structure are channels_{min,max} and not channel_{min,max} (mind the 's'). 2/ Another sentence is incomplete as the reference to one structure member (period_bytes_max) is missing. There is no relevant 'Fixes:' tag to apply as both typos predate the Git era. Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> --- Hello, I wrote and sent this patch in 2019 but I likely only Cc'd Jon and the doc ML, which might have not been enough, so just in case, here is a resend. Link: https://lore.kernel.org/linux-doc/20190829145512.3752-1-miquel.raynal@bootl… .../sound/kernel-api/writing-an-alsa-driver.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index 07a620c5ca74..5c9523b7d55c 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -1720,16 +1720,16 @@ Typically, you'll have a hardware descriptor as below: - ``rate_min`` and ``rate_max`` define the minimum and maximum sample rate. This should correspond somehow to ``rates`` bits. -- ``channel_min`` and ``channel_max`` define, as you might already +- ``channels_min`` and ``channels_max`` define, as you might already expected, the minimum and maximum number of channels. - ``buffer_bytes_max`` defines the maximum buffer size in bytes. There is no ``buffer_bytes_min`` field, since it can be calculated from the minimum period size and the minimum number of - periods. Meanwhile, ``period_bytes_min`` and define the minimum and - maximum size of the period in bytes. ``periods_max`` and - ``periods_min`` define the maximum and minimum number of periods in - the buffer. + periods. Meanwhile, ``period_bytes_min`` and ``period_bytes_max`` + define the minimum and maximum size of the period in bytes. + ``periods_max`` and ``periods_min`` define the maximum and minimum + number of periods in the buffer. The “period” is a term that corresponds to a fragment in the OSS world. The period defines the size at which a PCM interrupt is -- 2.34.1

3 2

[PATCH] ALSA: firewire-motu: fix unreleased lock warning in hwdep device
by Takashi Sakamoto 31 Jan '23

31 Jan '23

Smatch static analysis tool detects that acquired lock is not released in hwdep device when condition branch is passed due to no event. It is unlikely to occur, while fulfilling is preferable for better coding. Reported-by: Dan Carpenter <error27(a)gmail.com> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/motu/motu-hwdep.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/firewire/motu/motu-hwdep.c b/sound/firewire/motu/motu-hwdep.c index a900fc0e7644..88d1f4b56e4b 100644 --- a/sound/firewire/motu/motu-hwdep.c +++ b/sound/firewire/motu/motu-hwdep.c @@ -87,6 +87,10 @@ static long hwdep_read(struct snd_hwdep *hwdep, char __user *buf, long count, return -EFAULT; count = consumed; + } else { + spin_unlock_irq(&motu->lock); + + count = 0; } return count; -- 2.37.2

2 1

[PATCH] ALSA: firewire-lib: fix uninitialized local variable
by Takashi Sakamoto 31 Jan '23

31 Jan '23

The function local variable, curr_cycle_time is declared without initialization. When tracepoints event is not probed, it looks to be used as is. This commit fixes it. Fortunately, the value of local variable is not used unless the event is probed, thus this commit is for better coding. Reported-by: Dan Carpenter <error27(a)gmail.com> Fixes: fef4e61b0b7 ("ALSA: firewire-lib: extend tracepoints event including CYCLE_TIME of 1394 OHCI") Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/amdtp-stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index f7e1329efa0b..a13c0b408aad 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -910,7 +910,7 @@ static int generate_tx_packet_descs(struct amdtp_stream *s, struct pkt_desc *des unsigned int dbc = s->data_block_counter; unsigned int packet_index = s->packet_index; unsigned int queue_size = s->queue_size; - u32 curr_cycle_time; + u32 curr_cycle_time = 0; int i; int err; -- 2.37.2

2 1