June 2022 - Alsa-devel - mailman.alsa-project.org

Add basic support for ALC4082 on ASUS ROG Maximus Z690 Hero
by GitHub pull_request - edited 06 Jun '22

06 Jun '22

alsa-project/alsa-ucm-conf pull request #166 was edited from Lastique: This enables Microphone In in the rear jack and Headphones Out in the front panel jack on ASUS ROG Maximus Z690 Hero with Realtek ALC4082. Things that still don't work: - Microphone In on the front panel - Side channel output on the Line In jack in 7.1 mode - Rear channels and Center/Sub are swapped Line In on the rear panel detects microphone plugged in. Actual input not tested (no line out device available; no input from microphone). S/PDIF not tested. Related to https://github.com/alsa-project/alsa-ucm-conf/issues/165. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/166 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/166.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add basic support for ALC4082 on ASUS ROG Maximus Z690 Hero
by GitHub pull_request - opened 06 Jun '22

06 Jun '22

alsa-project/alsa-ucm-conf pull request #166 was opened from Lastique: This enables Microphone In in the rear jack and Headphones Out in the front panel jack on ASUS ROG Maximus Z690 Hero with Realtek ALC4082. Things that still don't work: - Microphone In on the front panel - Side channel output on the Line In jack in 7.1 mode - Rear channels and Center/Sub are swapped Line In on the rear panel detects microphone plugged in. Actual input not tested (no line out device available; no input from microphone). S/PDIF not tested. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/166 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/166.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[RESEND PATCH v3 0/6] OPE support on Tegra210 and later
by Sameer Pujar 06 Jun '22

06 Jun '22

This series adds support for Output Prcoessing Module (OPE) module on Tegra210 and later generations of SoCs. OPE is a client of AHUB and it has sub blocks of PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor) for data processing. An ASoC component is registered for OPE, which includes PEQ and MBDRC functions as well. This can be plugged in audio path using ALSA mixer controls. The series adds necessary binding documentaion, driver and DT binding patches to enable OPE module on Jetson platforms. Changelog ========= v2 -> v3: --------- * Drop "Device Tree Bindings" string from bindind doc titles for OPE, PEQ and MBDRC. v1 -> v2: --------- * Use generic node names for OPE, PEQ and MBDRC devices. Update binding doc and DT patches for this. * Remove redundant nodename rule enforcement from OPE, PEQ and MBDRC nodes. Update binding doc patch for this. * Fix spaces before binding doc examples and remove '|' from binding doc descriptions. Sameer Pujar (6): ASoC: tegra: Add binding doc for OPE module ASoC: tegra: Add Tegra210 based OPE driver ASoC: tegra: AHUB routes for OPE module arm64: defconfig: Build Tegra OPE module arm64: tegra: Add OPE device on Tegra210 and later arm64: tegra: Enable OPE on various platforms .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + .../bindings/sound/nvidia,tegra210-mbdrc.yaml | 47 + .../bindings/sound/nvidia,tegra210-ope.yaml | 87 ++ .../bindings/sound/nvidia,tegra210-peq.yaml | 48 + arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 43 + arch/arm64/boot/dts/nvidia/tegra186.dtsi | 23 + arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 43 + .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 43 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 23 + arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 84 ++ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 84 ++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 40 + .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 43 + arch/arm64/boot/dts/nvidia/tegra234.dtsi | 23 + arch/arm64/configs/defconfig | 1 + sound/soc/tegra/Kconfig | 9 + sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra210_ahub.c | 39 +- sound/soc/tegra/tegra210_mbdrc.c | 1012 ++++++++++++++++++++ sound/soc/tegra/tegra210_mbdrc.h | 215 +++++ sound/soc/tegra/tegra210_ope.c | 419 ++++++++ sound/soc/tegra/tegra210_ope.h | 90 ++ sound/soc/tegra/tegra210_peq.c | 434 +++++++++ sound/soc/tegra/tegra210_peq.h | 56 ++ 24 files changed, 2908 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml create mode 100644 sound/soc/tegra/tegra210_mbdrc.c create mode 100644 sound/soc/tegra/tegra210_mbdrc.h create mode 100644 sound/soc/tegra/tegra210_ope.c create mode 100644 sound/soc/tegra/tegra210_ope.h create mode 100644 sound/soc/tegra/tegra210_peq.c create mode 100644 sound/soc/tegra/tegra210_peq.h -- 2.7.4

1 6

[PATCH v2] ASoC: SOF: Fix potential NULL pointer dereference
by Amadeusz Sławiński 06 Jun '22

06 Jun '22

Cleanup path for sof_prepare_widgets_in_path() should check if unprepare callback exists before calling it, instead it checks if it does not exist. Fix the check. Fixes: 66344c6d9211 ("ASoC: SOF: Add a prepare op to IPC topology widget ops") Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- v2 : Fix Fixes hash, apparently I looked at wrong tree --- sound/soc/sof/sof-audio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c index 8d740635a4bb..28976098a89e 100644 --- a/sound/soc/sof/sof-audio.c +++ b/sound/soc/sof/sof-audio.c @@ -318,7 +318,7 @@ sof_prepare_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget p->walking = false; if (ret < 0) { /* unprepare the source widget */ - if (!widget_ops[widget->id].ipc_unprepare && swidget->prepared) { + if (widget_ops[widget->id].ipc_unprepare && swidget->prepared) { widget_ops[widget->id].ipc_unprepare(swidget); swidget->prepared = false; } -- 2.25.1

1 0

[PATCH] slimbus: messaging: fix typos in comments
by Julia Lawall 06 Jun '22

06 Jun '22

Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall(a)inria.fr> --- drivers/slimbus/messaging.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c index e5ae26227bdb..4ce0cb61e481 100644 --- a/drivers/slimbus/messaging.c +++ b/drivers/slimbus/messaging.c @@ -79,7 +79,7 @@ int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn) EXPORT_SYMBOL_GPL(slim_alloc_txn_tid); /** - * slim_free_txn_tid() - Freee tid of txn + * slim_free_txn_tid() - Free tid of txn * * @ctrl: Controller handle * @txn: transaction whose tid should be freed @@ -101,7 +101,7 @@ EXPORT_SYMBOL_GPL(slim_free_txn_tid); * @txn: Transaction to be sent over SLIMbus * * Called by controller to transmit messaging transactions not dealing with - * Interface/Value elements. (e.g. transmittting a message to assign logical + * Interface/Value elements. (e.g. transmitting a message to assign logical * address to a slave device * * Return: -ETIMEDOUT: If transmission of this message timed out

2 1

[PATCH] drivers: slimbus: Directly use ida_alloc()/free()
by keliu 06 Jun '22

06 Jun '22

Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94(a)huawei.com> --- drivers/slimbus/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index 78480e332ab8..219483b79c09 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -250,7 +250,7 @@ int slim_register_controller(struct slim_controller *ctrl) { int id; - id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + id = ida_alloc(&ctrl_ida, GFP_KERNEL); if (id < 0) return id; @@ -299,7 +299,7 @@ int slim_unregister_controller(struct slim_controller *ctrl) { /* Remove all clients */ device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device); - ida_simple_remove(&ctrl_ida, ctrl->id); + ida_free(&ctrl_ida, ctrl->id); return 0; } @@ -323,7 +323,7 @@ void slim_report_absent(struct slim_device *sbdev) sbdev->is_laddr_valid = false; mutex_unlock(&ctrl->lock); if (!ctrl->get_laddr) - ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr); + ida_free(&ctrl->laddr_ida, sbdev->laddr); slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN); } EXPORT_SYMBOL_GPL(slim_report_absent); -- 2.25.1

2 1

[PATCH] ASoC: wm_adsp: Remove redundant NULL check before release_firmware() call
by cgel.zte＠gmail.com 06 Jun '22

06 Jun '22

From: Minghao Chi <chi.minghao(a)zte.com.cn> release_firmware() checks for NULL pointers internally so checking before calling it is redundant. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao(a)zte.com.cn> --- sound/soc/codecs/wm_adsp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 7973a75cac05..4c4344b21c2e 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -739,12 +739,10 @@ static void wm_adsp_release_firmware_files(struct wm_adsp *dsp, const struct firmware *coeff_firmware, char *coeff_filename) { - if (wmfw_firmware) - release_firmware(wmfw_firmware); + release_firmware(wmfw_firmware); kfree(wmfw_filename); - if (coeff_firmware) - release_firmware(coeff_firmware); + release_firmware(coeff_firmware); kfree(coeff_filename); } -- 2.25.1

2 1

[PATCH] ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
by Cameron Berkenpas 06 Jun '22

06 Jun '22

Enables the ALC287_FIXUP_YOGA7_14ITL_SPEAKERS quirk for the Lenovo Yoga DuetITL 2021 laptop to fix speaker output. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Signed-off-by: Cameron Berkenpas <cam(a)neo-zeon.de> Co-authored-by: Songine <donglingluoying(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f3ad454b3fbf..2af5725dfca0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9262,6 +9262,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME), SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3820, "Yoga Duet 7 13ITL6", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo Yoga DuetITL 2021", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3824, "Legion Y9000X 2020", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3834, "Lenovo IdeaPad Slim 9i 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), -- 2.34.1

2 1

[PATCH] dt-bindings: Fix properties without any type
by Rob Herring 06 Jun '22

06 Jun '22

Now that the schema tools can extract type information for all properties (in order to decode dtb files), finding properties missing any type definition is fairly trivial though not yet automated. Fix the various property schemas which are missing a type. Most of these tend to be device specific properties which don't have a vendor prefix. A vendor prefix is how we normally ensure a type is defined. Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../arm/hisilicon/controller/hip04-bootwrapper.yaml | 5 +++-- .../bindings/display/bridge/toshiba,tc358768.yaml | 1 + .../devicetree/bindings/display/panel/panel-timing.yaml | 5 +++++ .../bindings/display/panel/raydium,rm67191.yaml | 1 + .../bindings/display/panel/samsung,s6e8aa0.yaml | 1 + .../devicetree/bindings/gpio/fairchild,74hc595.yaml | 1 + .../devicetree/bindings/input/google,cros-ec-keyb.yaml | 1 + .../devicetree/bindings/input/matrix-keymap.yaml | 4 ++++ Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 3 ++- Documentation/devicetree/bindings/mux/reg-mux.yaml | 8 ++++++-- Documentation/devicetree/bindings/net/cdns,macb.yaml | 1 + Documentation/devicetree/bindings/net/ingenic,mac.yaml | 1 + .../devicetree/bindings/net/ti,davinci-mdio.yaml | 1 + .../devicetree/bindings/net/wireless/ti,wlcore.yaml | 2 ++ .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 6 ++++-- Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml | 2 ++ .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 ++ Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml | 1 + .../devicetree/bindings/power/supply/battery.yaml | 7 ++++++- .../devicetree/bindings/power/supply/charger-manager.yaml | 1 + Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 1 + Documentation/devicetree/bindings/serial/8250.yaml | 1 + .../devicetree/bindings/sound/audio-graph-card2.yaml | 3 +++ .../devicetree/bindings/sound/imx-audio-hdmi.yaml | 3 +++ Documentation/devicetree/bindings/usb/smsc,usb3503.yaml | 1 + 25 files changed, 55 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml index 7378159e61df..483caf0ce25b 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -17,14 +17,15 @@ properties: - const: hisilicon,hip04-bootwrapper boot-method: + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Address and size of boot method. [0]: bootwrapper physical address [1]: bootwrapper size [2]: relocation physical address [3]: relocation size - minItems: 1 - maxItems: 2 + minItems: 2 + maxItems: 4 required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index 3bd670b8e5cd..0b6f5bef120f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -58,6 +58,7 @@ properties: properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] port@1: diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 7749de95ee40..229e3b36ee29 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -146,6 +146,7 @@ properties: Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -153,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -160,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -169,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -179,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index 745dd247c409..617aa8c8c03a 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -24,6 +24,7 @@ properties: dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index ca959451557e..1cdc91b3439f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -36,6 +36,7 @@ properties: init-delay: description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 panel-width-mm: description: physical panel width [mm] diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index 5fe19fa5f67c..a99e7842ca17 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -26,6 +26,7 @@ properties: const: 2 registers-number: + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of daisy-chained shift registers enable-gpios: diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml index e8f137abb03c..aa61fe64be63 100644 --- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml @@ -31,6 +31,7 @@ properties: type: boolean function-row-physmap: + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 15 description: | diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index 6699d5e32dca..9f703bb51e12 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -27,6 +27,10 @@ properties: column and linux key-code. The 32-bit big endian cell is packed as: row << 24 | column << 16 | key-code + linux,no-autorepeat: + type: boolean + description: Disable keyrepeat + keypad,num-rows: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of row lines connected to the keypad controller. diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml index c19d8391e2d5..7589d377c686 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -60,7 +60,8 @@ properties: enables hot-plug detection. default-input: - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] description: Select which input is selected after reset. diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml index 60d5746eb39d..e2f6b11f1254 100644 --- a/Documentation/devicetree/bindings/mux/reg-mux.yaml +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml @@ -25,8 +25,12 @@ properties: const: 1 mux-reg-masks: - description: an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: register offset + - description: pre-shifted bitfield mask + description: Each entry describes a single mux control. idle-states: true diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 6cd3d853dcba..59fe2789fa44 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -129,6 +129,7 @@ patternProperties: reset-gpios: true magic-packet: + type: boolean description: Indicates that the hardware supports waking up via magic packet. diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml index 8e52b2e683b8..93b3e991d209 100644 --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -37,6 +37,7 @@ properties: const: stmmaceth mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle description: An extra syscon register that control ethernet interface and timing delay rx-clk-delay-ps: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 6f44f9516c36..a339202c5e8e 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -34,6 +34,7 @@ properties: maxItems: 1 bus_freq: + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 2500000 description: MDIO Bus frequency diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 8dd164d10290..d68bb2ec1f7e 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -54,9 +54,11 @@ properties: ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: TCXO clock frequency. clock-xtal: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index e59059ab5be0..b78535040f04 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -55,13 +55,15 @@ properties: Translation Unit) registers. num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of inbound address translation windows - maxItems: 1 deprecated: true num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: number of outbound address translation windows - maxItems: 1 deprecated: true required: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index a5345c494744..c90e5e2d25f6 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -68,6 +68,8 @@ properties: Translation Unit) registers. num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 256 description: | number of view ports configured in hardware. If a platform does not specify it, the driver autodetects it. diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 53e963e090f2..533b4cfe33d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -120,6 +120,7 @@ patternProperties: input-schmitt-disable: true input-polarity-invert: + type: boolean description: Enable or disable pin input polarity inversion. @@ -132,6 +133,7 @@ patternProperties: output-low: true output-polarity-invert: + type: boolean description: Enable or disable pin output polarity inversion. diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml index 3301fa0c2653..301db7daf870 100644 --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -51,6 +51,7 @@ properties: supported by the CPR power domain. acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to the syscon used for writing ACC settings. nvmem-cells: diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index d56ac484fec5..491488e7b970 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -85,8 +85,13 @@ properties: description: battery factory internal resistance resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: the temperature in degree Celsius + - description: battery internal resistance percent description: | - An array providing the temperature in degree Celsius + A table providing the temperature in degree Celsius and corresponding battery internal resistance percent, which is used to look up the resistance percent according to current temperature to get an accurate batterty internal resistance in different temperatures. diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml index c863cfa67865..fbb2204769aa 100644 --- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -36,6 +36,7 @@ properties: cm-poll-mode: description: polling mode + $ref: /schemas/types.yaml#/definitions/uint32 default: 0 enum: - 0 # disabled diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml index 9a6e4eaf4d3c..fcd86f822a9c 100644 --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml @@ -27,6 +27,7 @@ properties: maxItems: 1 clock-error-detect: + type: boolean description: If set enable the clock detection management required: diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 3bab2f27b970..5f6b113d378f 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -138,6 +138,7 @@ properties: description: The current active speed of the UART. reg-offset: + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset to apply to the mapbase from the start of the registers. diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index f7e94b1e0e4b..7416067c945e 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -24,10 +24,13 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array multi: + type: object description: Multi-CPU/Codec node dpcm: + type: object description: DPCM node codec2codec: + type: object description: Codec to Codec node required: diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml index d5474f83ac2c..e7e7bb65c366 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml @@ -20,9 +20,11 @@ properties: description: User specified audio sound card name audio-cpu: + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of an CPU DAI controller hdmi-out: + type: boolean description: | This is a boolean property. If present, the transmitting function of HDMI will be enabled, indicating there's a physical HDMI out @@ -30,6 +32,7 @@ properties: block, such as an HDMI encoder or display-controller. hdmi-in: + type: boolean description: | This is a boolean property. If present, the receiving function of HDMI will be enabled, indicating there is a physical HDMI in diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml index b9e219829801..321b6f166197 100644 --- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml +++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml @@ -45,6 +45,7 @@ properties: property if all ports have to be enabled. initial-mode: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] description: > Specifies initial mode. 1 for Hub mode, 2 for standby mode. -- 2.34.1

8 8

[PATCH] ASoC: imx-audmux: remove unnecessary check of clk_disable_unprepare
by cgel.zte＠gmail.com 06 Jun '22

06 Jun '22

From: Minghao Chi <chi.minghao(a)zte.com.cn> Because clk_disable_unprepare already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao(a)zte.com.cn> --- sound/soc/fsl/imx-audmux.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c index dfa05d40b276..f434fa7decc1 100644 --- a/sound/soc/fsl/imx-audmux.c +++ b/sound/soc/fsl/imx-audmux.c @@ -71,8 +71,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf, ptcr = readl(audmux_base + IMX_AUDMUX_V2_PTCR(port)); pdcr = readl(audmux_base + IMX_AUDMUX_V2_PDCR(port)); - if (audmux_clk) - clk_disable_unprepare(audmux_clk); + clk_disable_unprepare(audmux_clk); buf = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!buf) @@ -218,8 +217,7 @@ int imx_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, writel(ptcr, audmux_base + IMX_AUDMUX_V2_PTCR(port)); writel(pdcr, audmux_base + IMX_AUDMUX_V2_PDCR(port)); - if (audmux_clk) - clk_disable_unprepare(audmux_clk); + clk_disable_unprepare(audmux_clk); return 0; } -- 2.25.1

2 1