November 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 6.0 11/30] ASoC: codecs: jz4725b: add missed Line In power control bit
by Sasha Levin 06 Nov '22

06 Nov '22

From: Siarhei Volkau <lis8215(a)gmail.com> [ Upstream commit 1013999b431b4bcdc1f5ae47dd3338122751db31 ] Line In path stayed powered off during capturing or bypass to mixer. Signed-off-by: Siarhei Volkau <lis8215(a)gmail.com> Link: https://lore.kernel.org/r/20221016132648.3011729-2-lis8215@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/jz4725b.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/jz4725b.c b/sound/soc/codecs/jz4725b.c index 5201a8f6d7b6..cc7a48c96aa4 100644 --- a/sound/soc/codecs/jz4725b.c +++ b/sound/soc/codecs/jz4725b.c @@ -236,7 +236,8 @@ static const struct snd_soc_dapm_widget jz4725b_codec_dapm_widgets[] = { SND_SOC_DAPM_MIXER("DAC to Mixer", JZ4725B_CODEC_REG_CR1, REG_CR1_DACSEL_OFFSET, 0, NULL, 0), - SND_SOC_DAPM_MIXER("Line In", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Line In", JZ4725B_CODEC_REG_PMR1, + REG_PMR1_SB_LIN_OFFSET, 1, NULL, 0), SND_SOC_DAPM_MIXER("HP Out", JZ4725B_CODEC_REG_CR1, REG_CR1_HP_DIS_OFFSET, 1, NULL, 0), -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 09/30] ASoC: wm8962: Add an event handler for TEMP_HP and TEMP_SPK
by Sasha Levin 06 Nov '22

06 Nov '22

From: Xiaolei Wang <xiaolei.wang(a)windriver.com> [ Upstream commit ee1aa2ae3eaa96e70229fa61deee87ef4528ffdf ] In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile register, but this register mixes a bunch of volatile status bits and a bunch of non-volatile control bits. The dapm widgets TEMP_HP and TEMP_SPK leverages the control bits in this register. After the wm8962 probe, the regmap will bet set to cache only mode, then a read error like below would be triggered when trying to read the initial power state of the dapm widgets TEMP_HP and TEMP_SPK. wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 In order to fix this issue, we add event handler to actually power up/down these widgets. With this change, we also need to explicitly power off these widgets in the wm8962 probe since they are enabled by default. Signed-off-by: Xiaolei Wang <xiaolei.wang(a)windriver.com> Tested-by: Adam Ford <aford173(a)gmail.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.c… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wm8962.c | 54 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 398c448ea854..6df06fba4377 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1840,6 +1840,49 @@ SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5, 4, 1, 0, inmix_tlv), }; +static int tp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + int ret, reg, val, mask; + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + + ret = pm_runtime_resume_and_get(component->dev); + if (ret < 0) { + dev_err(component->dev, "Failed to resume device: %d\n", ret); + return ret; + } + + reg = WM8962_ADDITIONAL_CONTROL_4; + + if (!strcmp(w->name, "TEMP_HP")) { + mask = WM8962_TEMP_ENA_HP_MASK; + val = WM8962_TEMP_ENA_HP; + } else if (!strcmp(w->name, "TEMP_SPK")) { + mask = WM8962_TEMP_ENA_SPK_MASK; + val = WM8962_TEMP_ENA_SPK; + } else { + pm_runtime_put(component->dev); + return -EINVAL; + } + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + val = 0; + fallthrough; + case SND_SOC_DAPM_POST_PMU: + ret = snd_soc_component_update_bits(component, reg, mask, val); + break; + default: + WARN(1, "Invalid event %d\n", event); + pm_runtime_put(component->dev); + return -EINVAL; + } + + pm_runtime_put(component->dev); + + return 0; +} + static int cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -2140,8 +2183,10 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT, WM8962_DSP2_ENA_SHIFT, 0, dsp2_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("TEMP_HP", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("TEMP_SPK", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0, inpgal, ARRAY_SIZE(inpgal)), @@ -3763,6 +3808,11 @@ static int wm8962_i2c_probe(struct i2c_client *i2c) if (ret < 0) goto err_pm_runtime; + regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_HP_MASK, 0); + regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_SPK_MASK, 0); + regcache_cache_only(wm8962->regmap, true); /* The drivers should power up as needed */ -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 08/30] ASoC: rt1019: Fix the TDM settings
by Sasha Levin 06 Nov '22

06 Nov '22

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit f2635d45a750182c6d5de15e2d6b059e0c302d7e ] Complete the missing and correct the TDM settings. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://lore.kernel.org/r/20221012030102.4042-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt1019.c | 20 +++++++++++--------- sound/soc/codecs/rt1019.h | 6 ++++++ 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/rt1019.c b/sound/soc/codecs/rt1019.c index b66bfecbb879..49f527c61a7a 100644 --- a/sound/soc/codecs/rt1019.c +++ b/sound/soc/codecs/rt1019.c @@ -391,18 +391,18 @@ static int rt1019_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) { struct snd_soc_component *component = dai->component; - unsigned int val = 0, rx_slotnum; + unsigned int cn = 0, cl = 0, rx_slotnum; int ret = 0, first_bit; switch (slots) { case 4: - val |= RT1019_I2S_TX_4CH; + cn = RT1019_I2S_TX_4CH; break; case 6: - val |= RT1019_I2S_TX_6CH; + cn = RT1019_I2S_TX_6CH; break; case 8: - val |= RT1019_I2S_TX_8CH; + cn = RT1019_I2S_TX_8CH; break; case 2: break; @@ -412,16 +412,16 @@ static int rt1019_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, switch (slot_width) { case 20: - val |= RT1019_I2S_DL_20; + cl = RT1019_TDM_CL_20; break; case 24: - val |= RT1019_I2S_DL_24; + cl = RT1019_TDM_CL_24; break; case 32: - val |= RT1019_I2S_DL_32; + cl = RT1019_TDM_CL_32; break; case 8: - val |= RT1019_I2S_DL_8; + cl = RT1019_TDM_CL_8; break; case 16: break; @@ -470,8 +470,10 @@ static int rt1019_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, goto _set_tdm_err_; } + snd_soc_component_update_bits(component, RT1019_TDM_1, + RT1019_TDM_CL_MASK, cl); snd_soc_component_update_bits(component, RT1019_TDM_2, - RT1019_I2S_CH_TX_MASK | RT1019_I2S_DF_MASK, val); + RT1019_I2S_CH_TX_MASK, cn); _set_tdm_err_: return ret; diff --git a/sound/soc/codecs/rt1019.h b/sound/soc/codecs/rt1019.h index 64df831eeb72..48ba15efb48d 100644 --- a/sound/soc/codecs/rt1019.h +++ b/sound/soc/codecs/rt1019.h @@ -95,6 +95,12 @@ #define RT1019_TDM_BCLK_MASK (0x1 << 6) #define RT1019_TDM_BCLK_NORM (0x0 << 6) #define RT1019_TDM_BCLK_INV (0x1 << 6) +#define RT1019_TDM_CL_MASK (0x7) +#define RT1019_TDM_CL_8 (0x4) +#define RT1019_TDM_CL_32 (0x3) +#define RT1019_TDM_CL_24 (0x2) +#define RT1019_TDM_CL_20 (0x1) +#define RT1019_TDM_CL_16 (0x0) /* 0x0401 TDM Control-2 */ #define RT1019_I2S_CH_TX_MASK (0x3 << 6) -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 07/30] ASoC: rt5682s: Fix the TDM Tx settings
by Sasha Levin 06 Nov '22

06 Nov '22

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit d94bf16e920047c9b4ea2b57f7b53b4ff5039d9f ] Complete the missing and correct the TDM Tx settings. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://lore.kernel.org/r/20221012031320.6980-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5682s.c | 15 +++++++++++++-- sound/soc/codecs/rt5682s.h | 1 + 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index eb47e7cd485a..95fe993d59cb 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -1932,7 +1932,7 @@ static int rt5682s_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) { struct snd_soc_component *component = dai->component; - unsigned int cl, val = 0; + unsigned int cl, val = 0, tx_slotnum; if (tx_mask || rx_mask) snd_soc_component_update_bits(component, @@ -1941,6 +1941,16 @@ static int rt5682s_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, snd_soc_component_update_bits(component, RT5682S_TDM_ADDA_CTRL_2, RT5682S_TDM_EN, 0); + /* Tx slot configuration */ + tx_slotnum = hweight_long(tx_mask); + if (tx_slotnum) { + if (tx_slotnum > slots) { + dev_err(component->dev, "Invalid or oversized Tx slots.\n"); + return -EINVAL; + } + val |= (tx_slotnum - 1) << RT5682S_TDM_ADC_DL_SFT; + } + switch (slots) { case 4: val |= RT5682S_TDM_TX_CH_4; @@ -1961,7 +1971,8 @@ static int rt5682s_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, } snd_soc_component_update_bits(component, RT5682S_TDM_CTRL, - RT5682S_TDM_TX_CH_MASK | RT5682S_TDM_RX_CH_MASK, val); + RT5682S_TDM_TX_CH_MASK | RT5682S_TDM_RX_CH_MASK | + RT5682S_TDM_ADC_DL_MASK, val); switch (slot_width) { case 8: diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 7353831c73dd..b660a311b6c2 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -899,6 +899,7 @@ #define RT5682S_TDM_RX_CH_8 (0x3 << 8) #define RT5682S_TDM_ADC_LCA_MASK (0x7 << 4) #define RT5682S_TDM_ADC_LCA_SFT 4 +#define RT5682S_TDM_ADC_DL_MASK (0x3 << 0) #define RT5682S_TDM_ADC_DL_SFT 0 /* TDM control 2 (0x007a) */ -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 06/30] ASoC: mt6660: Keep the pm_runtime enables before component stuff in mt6660_i2c_probe
by Sasha Levin 06 Nov '22

06 Nov '22

From: Zhang Qilong <zhangqilong3(a)huawei.com> [ Upstream commit c4ab29b0f3a6f1e167c5a627f7cd036c1d2b7d65 ] It would be better to keep the pm_runtime enables before the IRQ and component stuff. Both of those could start triggering PM runtime events. Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Link: https://lore.kernel.org/r/20221008140522.134912-1-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/mt6660.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/mt6660.c b/sound/soc/codecs/mt6660.c index 45e0df13afb9..b8369eeccc30 100644 --- a/sound/soc/codecs/mt6660.c +++ b/sound/soc/codecs/mt6660.c @@ -503,14 +503,14 @@ static int mt6660_i2c_probe(struct i2c_client *client) dev_err(chip->dev, "read chip revision fail\n"); goto probe_fail; } + pm_runtime_set_active(chip->dev); + pm_runtime_enable(chip->dev); ret = devm_snd_soc_register_component(chip->dev, &mt6660_component_driver, &mt6660_codec_dai, 1); - if (!ret) { - pm_runtime_set_active(chip->dev); - pm_runtime_enable(chip->dev); - } + if (ret) + pm_runtime_disable(chip->dev); return ret; -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 05/30] ASoC: wm8997: Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe"
by Sasha Levin 06 Nov '22

06 Nov '22

From: Zhang Qilong <zhangqilong3(a)huawei.com> [ Upstream commit 68ce83e3bb26feba0fcdd59667fde942b3a600a1 ] This reverts commit 41a736ac20602f64773e80f0f5b32cde1830a44a. The pm_runtime_disable is redundant when error returns in wm8997_probe, we just revert the old patch to fix it. Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20221010114852.88127-4-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wm8997.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8997.c b/sound/soc/codecs/wm8997.c index 77136a521605..210ad662fc26 100644 --- a/sound/soc/codecs/wm8997.c +++ b/sound/soc/codecs/wm8997.c @@ -1161,6 +1161,9 @@ static int wm8997_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, wm8997_digital_vu[i], WM8997_DIG_VU, WM8997_DIG_VU); + pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + arizona_init_common(arizona); ret = arizona_init_vol_limit(arizona); @@ -1179,9 +1182,6 @@ static int wm8997_probe(struct platform_device *pdev) goto err_spk_irqs; } - pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); - return ret; err_spk_irqs: -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 04/30] ASoC: wm5110: Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe"
by Sasha Levin 06 Nov '22

06 Nov '22

From: Zhang Qilong <zhangqilong3(a)huawei.com> [ Upstream commit 7d4e966f4cd73ff69bf06934e8e14a33fb7ef447 ] This reverts commit 86b46bf1feb83898d89a2b4a8d08d21e9ea277a7. The pm_runtime_disable is redundant when error returns in wm5110_probe, we just revert the old patch to fix it. Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20221010114852.88127-3-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wm5110.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index fc634c995834..f3f4a10bf0f7 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -2457,6 +2457,9 @@ static int wm5110_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, wm5110_digital_vu[i], WM5110_DIG_VU, WM5110_DIG_VU); + pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + ret = arizona_request_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, "ADSP2 Compressed IRQ", wm5110_adsp2_irq, wm5110); @@ -2489,9 +2492,6 @@ static int wm5110_probe(struct platform_device *pdev) goto err_spk_irqs; } - pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); - return ret; err_spk_irqs: -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 03/30] ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe"
by Sasha Levin 06 Nov '22

06 Nov '22

From: Zhang Qilong <zhangqilong3(a)huawei.com> [ Upstream commit de71d7567e358effd06dfc3e2a154b25f1331c10 ] This reverts commit fcbb60820cd3008bb44334a0395e5e57ccb77329. The pm_runtime_disable is redundant when error returns in wm5102_probe, we just revert the old patch to fix it. Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20221010114852.88127-2-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wm5102.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index c09c9ac51b3e..af7d324e3352 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -2099,6 +2099,9 @@ static int wm5102_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, wm5102_digital_vu[i], WM5102_DIG_VU, WM5102_DIG_VU); + pm_runtime_enable(&pdev->dev); + pm_runtime_idle(&pdev->dev); + ret = arizona_request_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, "ADSP2 Compressed IRQ", wm5102_adsp2_irq, wm5102); @@ -2131,9 +2134,6 @@ static int wm5102_probe(struct platform_device *pdev) goto err_spk_irqs; } - pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); - return ret; err_spk_irqs: -- 2.35.1

1 0

[Digidesign Mbox 3] Does ucm SplitPCM add latency?
by GitHub issues - opened 06 Nov '22

06 Nov '22

alsa-project/alsa-ucm-conf issue #238 was opened from ManuLinares: https://github.com/alsa-project/alsa-ucm-conf/pull/237 I've correctly configured ucm profile, but I notice a small latency added when using UCM **vs** not using it (having the default alsa analog-surround4.0 profile) Is this the expected behavior of SplitPCM in UCM? Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/238 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2: add support for "Digidesign Mbox 3"
by GitHub pull_request - opened 05 Nov '22

05 Nov '22

alsa-project/alsa-ucm-conf pull request #237 was opened from ManuLinares: Add ucm2 support for "Digidesign Mbox 3", without it, alsa detects as analog-surround4.0, instead of 2 line and 2 spdif in/out. [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/9944813/… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/237 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/237.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0