September 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: rt5682: fix headset background noise when S3 state
by shumingf＠realtek.com 01 Sep '21

01 Sep '21

From: Shuming Fan <shumingf(a)realtek.com> Remove CBJ power off setting to avoid floating state. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt5682.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index e822fa1b9d4b..4a64cab99c55 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -2942,9 +2942,6 @@ static int rt5682_suspend(struct snd_soc_component *component) break; } - snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3, - RT5682_PWR_CBJ, 0); - /* enter SAR ADC power saving mode */ snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | -- 2.31.1

2 1

[PATCH] ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
by Colin King 01 Sep '21

01 Sep '21

From: Colin Ian King <colin.king(a)canonical.com> There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/soc/samsung/s3c24xx_simtec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c index 81a29d12c57d..0cc66774b85d 100644 --- a/sound/soc/samsung/s3c24xx_simtec.c +++ b/sound/soc/samsung/s3c24xx_simtec.c @@ -327,7 +327,7 @@ int simtec_audio_core_probe(struct platform_device *pdev, snd_dev = platform_device_alloc("soc-audio", -1); if (!snd_dev) { - dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n"); + dev_err(&pdev->dev, "failed to alloc soc-audio device\n"); ret = -ENOMEM; goto err_gpio; } -- 2.32.0

3 2

[PATCH] ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
by Geert Uytterhoeven 01 Sep '21

01 Sep '21

The Mediatek MT8195 sound hardware is only present on Mediatek MT8195 SoCs. Hence add a dependency on ARCH_MEDIATEK, to prevent asking the user about this driver when configuring a kernel without Mediatek SoC support. Fixes: 6746cc858259985a ("ASoC: mediatek: mt8195: add platform driver") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- sound/soc/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index cf567a89f421b4c0..c8c815f599da90bf 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -187,6 +187,7 @@ config SND_SOC_MT8192_MT6359_RT1015_RT5682 config SND_SOC_MT8195 tristate "ASoC support for Mediatek MT8195 chip" + depends on ARCH_MEDIATEK || COMPILE_TEST select SND_SOC_MEDIATEK help This adds ASoC platform driver support for Mediatek MT8195 chip -- 2.25.1

4 3

[PATCH] ASoC: dt-bindings: mt8195: remove dependent headers in the example
by Trevor Wu 01 Sep '21

01 Sep '21

Drop the use of the defines including clock and power id, so that we can remove the headers which are not applied in the example. Fixes: b5bac34fcfb4 ("dt-bindings: mediatek: mt8195: add audio afe document") Signed-off-by: Trevor Wu <trevor.wu(a)mediatek.com> --- .../bindings/sound/mt8195-afe-pcm.yaml | 40 +++++++++---------- 1 file changed, 19 insertions(+), 21 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index 53e9434a6d9d..dcf790b053d2 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -130,36 +130,34 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/mt8195-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/power/mt8195-power.h> afe: mt8195-afe-pcm@10890000 { compatible = "mediatek,mt8195-audio"; reg = <0x10890000 0x10000>; interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>; mediatek,topckgen = <&topckgen>; - power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>; + power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO clocks = <&clk26m>, - <&topckgen CLK_TOP_APLL1>, - <&topckgen CLK_TOP_APLL2>, - <&topckgen CLK_TOP_APLL12_DIV0>, - <&topckgen CLK_TOP_APLL12_DIV1>, - <&topckgen CLK_TOP_APLL12_DIV2>, - <&topckgen CLK_TOP_APLL12_DIV3>, - <&topckgen CLK_TOP_APLL12_DIV9>, - <&topckgen CLK_TOP_A1SYS_HP_SEL>, - <&topckgen CLK_TOP_AUD_INTBUS_SEL>, - <&topckgen CLK_TOP_AUDIO_H_SEL>, - <&topckgen CLK_TOP_AUDIO_LOCAL_BUS_SEL>, - <&topckgen CLK_TOP_DPTX_M_SEL>, - <&topckgen CLK_TOP_I2SO1_M_SEL>, - <&topckgen CLK_TOP_I2SO2_M_SEL>, - <&topckgen CLK_TOP_I2SI1_M_SEL>, - <&topckgen CLK_TOP_I2SI2_M_SEL>, - <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>, - <&scp_adsp CLK_SCP_ADSP_AUDIODSP>; + <&topckgen 163>, //CLK_TOP_APLL1 + <&topckgen 166>, //CLK_TOP_APLL2 + <&topckgen 233>, //CLK_TOP_APLL12_DIV0 + <&topckgen 234>, //CLK_TOP_APLL12_DIV1 + <&topckgen 235>, //CLK_TOP_APLL12_DIV2 + <&topckgen 236>, //CLK_TOP_APLL12_DIV3 + <&topckgen 238>, //CLK_TOP_APLL12_DIV9 + <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL + <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL + <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL + <&topckgen 98>, //CLK_TOP_DPTX_M_SEL + <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL + <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL + <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL + <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL + <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B + <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP clock-names = "clk26m", "apll1_ck", "apll2_ck", -- 2.18.0

3 2

[PATCH v2 0/2] Add reset-gpios handling for max98927
by Alejandro Tafalla 01 Sep '21

01 Sep '21

The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) require hardware-resetting the codec by driving a reset-gpio. This series add support for it through an optional reset-gpios property. Alejandro Tafalla (2): ASoC: max98927: Handle reset gpio when probing i2c dt-bindings: sound: max98927: Add reset-gpios optional property .../devicetree/bindings/sound/max9892x.txt | 3 +++ sound/soc/codecs/max98927.c | 15 +++++++++++++++ 2 files changed, 18 insertions(+) -- 2.32.0

3 5

[PATCH 0/3] Convert name-prefix doc to json-schema
by Sameer Pujar 01 Sep '21

01 Sep '21

Following are the changes: - Add json-schema for 'sound-name-prefix' documentation under 'name-perfix.yaml' - Use schema references wherever needed. - Remove txt based doc Sameer Pujar (3): ASoC: Add json-schema documentation for sound-name-prefix ASoC: Use schema reference for sound-name-prefix ASoC: Remove name-prefix.txt .../devicetree/bindings/sound/name-prefix.txt | 24 --------------- .../devicetree/bindings/sound/name-prefix.yaml | 35 ++++++++++++++++++++++ .../bindings/sound/nvidia,tegra186-dspk.yaml | 7 +---- .../bindings/sound/nvidia,tegra210-dmic.yaml | 7 +---- .../bindings/sound/nvidia,tegra210-i2s.yaml | 7 +---- .../devicetree/bindings/sound/nxp,tfa989x.yaml | 5 +--- Documentation/devicetree/bindings/sound/rt5659.txt | 2 +- .../bindings/sound/simple-audio-mux.yaml | 5 +--- 8 files changed, 41 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml -- 2.7.4

2 4

[PATCH v4 00/20] ASoC: qcom: Add AudioReach support
by Srinivas Kandagatla 01 Sep '21

01 Sep '21

Many thanks for reviewing v3. This version addresses all the comments raised as part of v3 review. This patchset adds ASoC driver support to configure signal processing framework ("AudioReach") which is integral part of Qualcomm next generation audio SDK and will be deployed on upcoming Qualcomm chipsets. It makes use of ASoC Topology to load graphs on to the DSP which is then managed by APM (Audio Processing Manager) service to prepare/start/stop. Here is simpified high-level block diagram of AudioReach: ___________________________________________________________ | CPU (Application Processor) | | +---------+ +---------+ +----------+ | | | q6apm | | q6apm | | q6apm | | | | dais | <------> | | <-----> |lpass-dais| | | +---------+ +---------+ +----------+ | | ^ ^ | | | | +---------+ | | +---------+ v +---------->|topology | | | | q6prm | +---------+ | | | | | |<-------->| GPR | +---------+ | | +---------+ +---------+ | | ^ ^ | | | | | | +----------+ | | | | q6prm | | | | |lpass-clks| | | | +----------+ | | |____________________________|______________________________| | | RPMSG (IPC over GLINK) ____________________________|______________________________ | | | | +-----------------------+ | | | | | | v v q6 (Audio DSP) | |+-----+ +----------------------------------+ | || PRM | | APM (Audio Processing Manager) | | |+-----+ | . Graph Management | | | | . Command Handing | | | | . Event Management | | | | ... | | | +----------------------------------+ | | ^ | |____________________________|______________________________| | | LPASS AIF ____________________________|______________________________ | | Audio I/O | | v | | +--------------------------------------------------+ | | | Audio devices | | | | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| | | | | | | +--------------------------------------------------+ | |___________________________________________________________| AudioReach has constructs of sub-graph, container and modules. Each sub-graph can have N containers and each Container can have N Modules and connections between them can be linear or non-linear. An audio function can be realized with one or many connected sub-graphs. There are also control/event paths between modules that can be wired up while building graph to achieve various control mechanism between modules. These concepts of Sub-Graph, Containers and Modules are represented in ASoC topology. Here is simple I2S graph with a Write Shared Memory and a Volume control module within a single Subgraph (1) with one Container (1) and 5 modules. ____________________________________________________________ | Sub-Graph [1] | | _______________________________________________________ | | | Container [1] | | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| | | |_______________________________________________________| | |____________________________________________________________| For now this graph is split into two subgraphs to achieve dpcm like below: ________________________________________________ _________________ | Sub-Graph [1] | | Sub-Graph [2] | | ____________________________________________ | | _____________ | | | Container [1] | | | |Container [2]| | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | | | |____________________________________________| | | |_____________| | |________________________________________________| |_________________| _________________ | Sub-Graph [3] | | _____________ | | |Container [3]| | | | [DMA-EP] | | | |_____________| | |_________________| This patchset adds very minimal support for AudioReach which includes supporting sub-graphs containing CODEC DMA ports and simple PCM Decoder/Encoder and Logger Modules. Additional capabilities will be built over time to expose features offered by AudioReach. This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5 and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio via I2S. First 10 Patches are mostly reorganization existing Old QDSP Audio Framework code and bindings so that we could reuse them on AudioReach. ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/ Thanks, srini Changes since v3: - Split some dt-bindings patches for easy review. - fixed various cppcheck warnings and ignore some bogus ones. - fixed memory leak in various places in topology - reordered Kconfig and Makefile changes - cleaned Kconfig symbols to fit in properly with existing Q6DSP KConfigs - added lpass suffix to compatible for nodes that are dealing with LPASS IP. - fix few typos. Srinivas Kandagatla (20): soc: dt-bindings: qcom: apr: convert to yaml soc: qcom: apr: make code more reuseable soc: dt-bindings: qcom: add gpr bindings soc: qcom: apr: Add GPR support ASoC: dt-bindings: move LPASS dai related bindings out of q6afe ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible ASoC: dt-bindings: add q6apm digital audio stream bindings ASoC: qdsp6: audioreach: add basic pkt alloc support ASoC: qdsp6: audioreach: add q6apm support ASoC: qdsp6: audioreach: add module configuration command helpers ASoC: qdsp6: audioreach: add topology support ASoC: qdsp6: audioreach: add q6apm-dai support ASoC: qdsp6: audioreach: add q6apm lpass dai support ASoC: qdsp6: audioreach: add q6prm support ASoC: qdsp6: audioreach: add support for q6prm-clocks .../devicetree/bindings/soc/qcom/qcom,apr.txt | 134 -- .../bindings/soc/qcom/qcom,apr.yaml | 209 +++ .../devicetree/bindings/sound/qcom,q6afe.txt | 181 --- .../bindings/sound/qcom,q6apm-dai.yaml | 50 + .../sound/qcom,q6dsp-lpass-clocks.yaml | 74 ++ .../sound/qcom,q6dsp-lpass-ports.yaml | 202 +++ drivers/soc/qcom/Kconfig | 8 + drivers/soc/qcom/apr.c | 286 +++- include/dt-bindings/soc/qcom,gpr.h | 18 + include/dt-bindings/sound/qcom,q6afe.h | 203 +-- .../sound/qcom,q6dsp-lpass-ports.h | 208 +++ include/linux/soc/qcom/apr.h | 70 +- include/uapi/sound/snd_ar_tokens.h | 203 +++ sound/soc/qcom/Kconfig | 22 + sound/soc/qcom/qdsp6/Makefile | 11 +- sound/soc/qcom/qdsp6/audioreach.c | 1170 +++++++++++++++++ sound/soc/qcom/qdsp6/audioreach.h | 692 ++++++++++ sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +-- sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +--------- sound/soc/qcom/qdsp6/q6apm-dai.c | 504 +++++++ sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 266 ++++ sound/soc/qcom/qdsp6/q6apm.c | 916 +++++++++++++ sound/soc/qcom/qdsp6/q6apm.h | 154 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++ sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 + sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++ sound/soc/qcom/qdsp6/q6prm.c | 256 ++++ sound/soc/qcom/qdsp6/q6prm.h | 78 ++ sound/soc/qcom/qdsp6/topology.c | 1118 ++++++++++++++++ 31 files changed, 7443 insertions(+), 1414 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml create mode 100644 include/dt-bindings/soc/qcom,gpr.h create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h create mode 100644 include/uapi/sound/snd_ar_tokens.h create mode 100644 sound/soc/qcom/qdsp6/audioreach.c create mode 100644 sound/soc/qcom/qdsp6/audioreach.h create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.h create mode 100644 sound/soc/qcom/qdsp6/topology.c -- 2.21.0

2 24

[PATCH v3 0/7] Patches to update for rockchip pdm
by Sugar Zhang 01 Sep '21

01 Sep '21

These patches fixup or update for rockchip pdm. Changes in v3: - Fix property 'path-map' suggested by Rob Herring. Changes in v2: - Fix yamllint errors. Sugar Zhang (7): ASoC: rockchip: Add support for rv1126 pdm ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm ASoC: rockchip: pdm: Add support for rk3568 pdm ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm ASoC: rockchip: pdm: Add support for path map ASoC: dt-bindings: rockchip: pdm: Document property 'rockchip,path-map' ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml .../devicetree/bindings/sound/rockchip,pdm.txt | 46 -------- .../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++ sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++-- sound/soc/rockchip/rockchip_pdm.h | 6 ++ 4 files changed, 232 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml -- 2.7.4

2 11

[PATCH v2 04/52] ASoC: dt-bindings: Convert Simple Amplifier binding to a schema
by Maxime Ripard 01 Sep '21

01 Sep '21

Simple audio amplifiers are supported by Linux with a matching device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: alsa-devel(a)alsa-project.org Cc: Jerome Brunet <jbrunet(a)baylibre.com> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Reviewed-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- .../bindings/sound/simple-amplifier.txt | 17 ------- .../sound/simple-audio-amplifier.yaml | 45 +++++++++++++++++++ 2 files changed, 45 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt create mode 100644 Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt deleted file mode 100644 index b1b097cc9b68..000000000000 --- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt +++ /dev/null @@ -1,17 +0,0 @@ -Simple Amplifier Audio Driver - -Required properties: -- compatible : "dioo,dio2125" or "simple-audio-amplifier" - -Optional properties: -- enable-gpios : the gpio connected to the enable pin of the simple amplifier -- VCC-supply : power supply for the device, as covered - in Documentation/devicetree/bindings/regulator/regulator.txt - -Example: - -amp: analog-amplifier { - compatible = "simple-audio-amplifier"; - VCC-supply = <&regulator>; - enable-gpios = <&gpio GPIOH_3 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml new file mode 100644 index 000000000000..26379377a7ac --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Audio Amplifier Device Tree Bindings + +maintainers: + - Jerome Brunet <jbrunet(a)baylibre.com> + +properties: + compatible: + enum: + - dioo,dio2125 + - simple-audio-amplifier + + enable-gpios: + maxItems: 1 + + VCC-supply: + description: > + power supply for the device + + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: > + See ./name-prefix.txt + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/meson8-gpio.h> + + analog-amplifier { + compatible = "simple-audio-amplifier"; + VCC-supply = <&regulator>; + enable-gpios = <&gpio GPIOH_3 0>; + }; + +... -- 2.31.1

1 0

[PATCH v2 03/52] ASoC: dt-bindings: Convert SPDIF Transmitter binding to a schema
by Maxime Ripard 01 Sep '21

01 Sep '21

The SPDIF Transmitter binding is used by Linux with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: alsa-devel(a)alsa-project.org Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Reviewed-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- .../bindings/sound/linux,spdif-dit.yaml | 32 +++++++++++++++++++ .../bindings/sound/spdif-transmitter.txt | 10 ------ 2 files changed, 32 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml delete mode 100644 Documentation/devicetree/bindings/sound/spdif-transmitter.txt diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml new file mode 100644 index 000000000000..c6b070e1d014 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dummy SPDIF Transmitter Device Tree Bindings + +maintainers: + - Mark Brown <broonie(a)kernel.org> + +properties: + compatible: + const: linux,spdif-dit + + "#sound-dai-cells": + const: 0 + +required: + - "#sound-dai-cells" + - compatible + +additionalProperties: false + +examples: + - | + spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt b/Documentation/devicetree/bindings/sound/spdif-transmitter.txt deleted file mode 100644 index 55a85841dd85..000000000000 --- a/Documentation/devicetree/bindings/sound/spdif-transmitter.txt +++ /dev/null @@ -1,10 +0,0 @@ -Device-Tree bindings for dummy spdif transmitter - -Required properties: - - compatible: should be "linux,spdif-dit". - -Example node: - - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - }; -- 2.31.1

1 0