September 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v4 0/7] Patches to update for rockchip pdm
by Sugar Zhang 23 Apr '24

23 Apr '24

These patches fixup or update for rockchip pdm. Changes in v4: - Acked by Rob Herring Changes in v3: - Fix property 'path-map' suggested by Rob Herring. Changes in v2: - Fix yamllint errors. Sugar Zhang (7): ASoC: rockchip: Add support for rv1126 pdm ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm ASoC: rockchip: pdm: Add support for rk3568 pdm ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm ASoC: rockchip: pdm: Add support for path map ASoC: dt-bindings: rockchip: pdm: Document property 'rockchip,path-map' ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml .../devicetree/bindings/sound/rockchip,pdm.txt | 46 -------- .../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++ sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++-- sound/soc/rockchip/rockchip_pdm.h | 6 ++ 4 files changed, 232 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml -- 2.7.4

3 9

Yamaha YIT-W12TX not working
by Julian Sikorski 27 Nov '23

27 Nov '23

Hi list, Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work: [ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily. Best regards, Julian [1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/down… [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downl…

2 7

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] [PATCH 0/6] ASoC: mediatek: mt8183: support DP audio
by Tzung-Bi Shih 24 Nov '22

24 Nov '22

(This series depends on https://lore.kernel.org/patchwork/patch/1126819/ which has not applied to the maintainer's tree yet.) This series makes mt8183-mt6358-ts3a227-max98357 support DP (display port) audio output. ASoC: hdmi-codec: add PCM trigger operator - add a PCM trigger callback if codec driver is interested in PCM events. drm: bridge: it6505: bridge to hdmi-codec - add audio feature support of it6505. - bridge to hdmi-codec so that ASoC can use the audio feature. - defer the "enabling" after receiving PCM START or RESUME event. ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec - bind to hdmi-codec in mt8183-mt6358-ts3a227-max98357. drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting - use the mechanism from the following patch https://mailman.alsa-project.org/pipermail/alsa-devel/2019-September/155302… to report jack status (from DRM to ASoC). Allen Chen (1): drm: bridge: it6505: bridge to hdmi-codec Tzung-Bi Shih (5): ASoC: hdmi-codec: add PCM trigger operator ASoC: dt-bindings: mt8183: add a property "mediatek,hdmi-codec" ASoC: mediatek: mt8183: use hdmi-codec drm: bridge: it6505: report connector status ASoC: mediatek: mt8183: support HDMI jack reporting .../sound/mt8183-mt6358-ts3a227-max98357.txt | 2 + drivers/gpu/drm/bridge/ite-it6505.c | 191 +++++++++++++++++- include/sound/hdmi-codec.h | 13 ++ sound/soc/codecs/hdmi-codec.c | 31 +++ sound/soc/mediatek/Kconfig | 3 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 36 +++- 6 files changed, 266 insertions(+), 10 deletions(-) -- 2.23.0.866.gb869b98d4c-goog

3 9

[PATCH] ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
by Takashi Iwai 22 Apr '22

22 Apr '22

Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync"), we apply the hw constraints for the implicit feedback sync to make the secondary open aligned with the already opened stream setup. This change assumed that the secondary open is performed after the first stream has been already set up, and adds the hw constraints to sync with the first stream's parameters only when the EP setup for the first stream was confirmed at the open time. However, most of applications handling the full-duplex operations do open both playback and capture streams at first, then set up both streams. This results in skipping the additional hw constraints since the counter-part stream hasn't been set up yet at the open of the second stream, and it eventually leads to "incompatible EP" error in the end. This patch corrects the behavior by always applying the hw constraints for the implicit fb sync. The hw constraint rules are defined so that they check the sync EP dynamically at each invocation, instead. This covers the concurrent stream setups better and lets the hw refine calls resolving to the right configuration. Also this patch corrects a minor error that has existed in the debug print that isn't built as default. Fixes: 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- This patched was developed primarily as an attemp for the regression of Pioneer devices. Although Pioneer devices have still some issues after this patch, this one itself should be good for all devices in general. Keith, Dylan, could you verify that this doesn't break things for your devices? sound/usb/pcm.c | 171 ++++++++++++++++++++++++++++++------------------ 1 file changed, 108 insertions(+), 63 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 56079901769f..f71965bf815f 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -663,7 +663,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, check_fmts.bits[1] = (u32)(fp->formats >> 32); snd_mask_intersect(&check_fmts, fmts); if (snd_mask_empty(&check_fmts)) { - hwc_debug(" > check: no supported format %d\n", fp->format); + hwc_debug(" > check: no supported format 0x%llx\n", fp->formats); return 0; } /* check the channels */ @@ -775,24 +775,11 @@ static int hw_rule_channels(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, rmin, rmax); } -static int hw_rule_format(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule) +static int apply_hw_params_format_bits(struct snd_mask *fmt, u64 fbits) { - struct snd_usb_substream *subs = rule->private; - const struct audioformat *fp; - struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - u64 fbits; u32 oldbits[2]; int changed; - hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); - fbits = 0; - list_for_each_entry(fp, &subs->fmt_list, list) { - if (!hw_check_valid_format(subs, params, fp)) - continue; - fbits |= fp->formats; - } - oldbits[0] = fmt->bits[0]; oldbits[1] = fmt->bits[1]; fmt->bits[0] &= (u32)fbits; @@ -806,6 +793,24 @@ static int hw_rule_format(struct snd_pcm_hw_params *params, return changed; } +static int hw_rule_format(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct audioformat *fp; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + u64 fbits; + + hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); + fbits = 0; + list_for_each_entry(fp, &subs->fmt_list, list) { + if (!hw_check_valid_format(subs, params, fp)) + continue; + fbits |= fp->formats; + } + return apply_hw_params_format_bits(fmt, fbits); +} + static int hw_rule_period_time(struct snd_pcm_hw_params *params, struct snd_pcm_hw_rule *rule) { @@ -833,64 +838,92 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, pmin, UINT_MAX); } -/* apply PCM hw constraints from the concurrent sync EP */ -static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, - struct snd_usb_substream *subs) +/* get the EP or the sync EP for implicit fb when it's already set up */ +static const struct snd_usb_endpoint * +get_sync_ep_from_substream(struct snd_usb_substream *subs) { struct snd_usb_audio *chip = subs->stream->chip; - struct snd_usb_endpoint *ep; const struct audioformat *fp; - int err; + const struct snd_usb_endpoint *ep; list_for_each_entry(fp, &subs->fmt_list, list) { ep = snd_usb_get_endpoint(chip, fp->endpoint); if (ep && ep->cur_rate) - goto found; + return ep; if (!fp->implicit_fb) continue; /* for the implicit fb, check the sync ep as well */ ep = snd_usb_get_endpoint(chip, fp->sync_ep); if (ep && ep->cur_rate) - goto found; + return ep; } - return 0; + return NULL; +} + +/* additional hw constraints for implicit feedback mode */ +static int hw_rule_format_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - found: - if (!find_format(&subs->fmt_list, ep->cur_format, ep->cur_rate, - ep->cur_channels, false, NULL)) { - usb_audio_dbg(chip, "EP 0x%x being used, but not applicable\n", - ep->ep_num); + ep = get_sync_ep_from_substream(subs); + if (!ep) return 0; - } - usb_audio_dbg(chip, "EP 0x%x being used, using fixed params:\n", - ep->ep_num); - usb_audio_dbg(chip, "rate=%d, period_size=%d, periods=%d\n", - ep->cur_rate, ep->cur_period_frames, - ep->cur_buffer_periods); + hwc_debug("applying %s\n", __func__); + return apply_hw_params_format_bits(fmt, pcm_format_to_bits(ep->cur_format)); +} - runtime->hw.formats = subs->formats; - runtime->hw.rate_min = runtime->hw.rate_max = ep->cur_rate; - runtime->hw.rates = SNDRV_PCM_RATE_KNOT; - runtime->hw.periods_min = runtime->hw.periods_max = - ep->cur_buffer_periods; +static int hw_rule_rate_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - hw_rule_channels, subs, - SNDRV_PCM_HW_PARAM_FORMAT, - SNDRV_PCM_HW_PARAM_RATE, - -1); - if (err < 0) - return err; + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; - err = snd_pcm_hw_constraint_minmax(runtime, - SNDRV_PCM_HW_PARAM_PERIOD_SIZE, - ep->cur_period_frames, - ep->cur_period_frames); - if (err < 0) - return err; + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + return apply_hw_params_minmax(it, ep->cur_rate, ep->cur_rate); +} + +static int hw_rule_period_size_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - return 1; /* notify the finding */ + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + return apply_hw_params_minmax(it, ep->cur_period_frames, + ep->cur_period_frames); +} + +static int hw_rule_periods_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; + + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIODS); + return apply_hw_params_minmax(it, ep->cur_buffer_periods, + ep->cur_buffer_periods); } /* @@ -899,20 +932,11 @@ static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substream *subs) { - struct snd_usb_audio *chip = subs->stream->chip; const struct audioformat *fp; unsigned int pt, ptmin; int param_period_time_if_needed = -1; int err; - mutex_lock(&chip->mutex); - err = apply_hw_constraint_from_sync(runtime, subs); - mutex_unlock(&chip->mutex); - if (err < 0) - return err; - if (err > 0) /* found the matching? */ - goto add_extra_rules; - runtime->hw.formats = subs->formats; runtime->hw.rate_min = 0x7fffffff; @@ -964,7 +988,6 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre if (err < 0) return err; -add_extra_rules: err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, hw_rule_channels, subs, SNDRV_PCM_HW_PARAM_FORMAT, @@ -993,6 +1016,28 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre return err; } + /* additional hw constraints for implicit fb */ + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, + hw_rule_format_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_FORMAT, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, + hw_rule_rate_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_RATE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + hw_rule_period_size_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS, + hw_rule_periods_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIODS, -1); + if (err < 0) + return err; + return 0; } -- 2.26.2

2 1

[alsa-devel] [PATCH 00/46] ARM: pxa: towards multiplatform support
by Arnd Bergmann 19 Apr '22

19 Apr '22

Hi PXA maintainers, I'm in the process of getting the old ARM platforms to all build in a single kernel. The largest part of that work is changing all the device drivers to no longer require mach/*.h header files. This series does it for arch/pxa/. As with the omap1 and s3c24xx series I sent before, I don't expect this all to be correct in the first version, though a lot of the patches are fairly simple and I did exhaustive compile-time testing on them. Please test if you have the hardware, or review! Arnd Bcc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Bcc: alsa-devel(a)alsa-project.org Bcc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Bcc: Brian Norris <computersforpeace(a)gmail.com> Bcc: Daniel Thompson <daniel.thompson(a)linaro.org> Bcc: David Woodhouse <dwmw2(a)infradead.org> Bcc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Bcc: Dominik Brodowski <linux(a)dominikbrodowski.net> Bcc: dri-devel(a)lists.freedesktop.org Bcc: Felipe Balbi <balbi(a)kernel.org> Bcc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Bcc: Guenter Roeck <linux(a)roeck-us.net> Bcc: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Bcc: Jens Axboe <axboe(a)kernel.dk> Bcc: Jingoo Han <jingoohan1(a)gmail.com> Bcc: Jonathan Cameron <jic23(a)cam.ac.uk> Bcc: Lee Jones <lee.jones(a)linaro.org> Bcc: Lubomir Rintel <lkundrak(a)v3.sk> Bcc: Marek Vasut <marek.vasut(a)gmail.com> Bcc: Mark Brown <broonie(a)kernel.org> Bcc: Michael Turquette <mturquette(a)baylibre.com> Bcc: Miquel Raynal <miquel.raynal(a)bootlin.com> Bcc: Paul Parsons <lost.distance(a)yahoo.com> Bcc: Pavel Machek <pavel(a)ucw.cz> Bcc: Philipp Zabel <philipp.zabel(a)gmail.com> Bcc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net> Bcc: Richard Weinberger <richard(a)nod.at> Bcc: Russell King <linux(a)armlinux.org.uk> Bcc: Sebastian Reichel <sre(a)kernel.org> Bcc: Sergey Lapin <slapin(a)ossfans.org> Bcc: Stephen Boyd <sboyd(a)kernel.org> Bcc: Tomas Cech <sleep_walker(a)suse.com> Bcc: Ulf Hansson <ulf.hansson(a)linaro.org> Bcc: Vignesh Raghavendra <vigneshr(a)ti.com> Bcc: Viresh Kumar <viresh.kumar(a)linaro.org> Bcc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: linux-clk(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-watchdog(a)vger.kernel.org Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: cmx270: use platform device for nand ARM: pxa: make addr-map.h header local ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers SoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver video: backlight: tosa: use gpio lookup table power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: move it8152 PCI support into machine ARM: pxa: remove unused mach/bitfield.h ARM: pxa: pci-it8152: add platform checks ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/common/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 8 +- arch/arm/mach-pxa/Makefile | 22 +- .../mach-pxa/{include/mach => }/addr-map.h | 0 .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 2 +- arch/arm/mach-pxa/cm-x270.c | 25 +++ arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +- arch/arm/mach-pxa/cm-x2xx.c | 7 +- arch/arm/mach-pxa/cm-x300.c | 12 +- .../arm/mach-pxa/cm_x255-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x270-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x2xx-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 3 +- arch/arm/mach-pxa/csb726.c | 3 +- arch/arm/mach-pxa/devices.c | 15 +- .../arm/mach-pxa/e740-pcmcia.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/eseries.c | 34 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 78 ++++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 2 +- arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/include/mach/regs-ost.h | 4 +- arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/include/mach/tosa.h | 15 -- arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 4 +- arch/arm/mach-pxa/lubbock.c | 15 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - arch/arm/mach-pxa/magician.c | 54 ++++- arch/arm/mach-pxa/mainstone.c | 15 +- .../mach-pxa/{include/mach => }/mainstone.h | 2 - arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.c | 11 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- .../it8152.c => mach-pxa/pci-it8152.c} | 25 ++- .../it8152.h => mach-pxa/pci-it8152.h} | 2 - arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 4 +- arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 6 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 11 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-pxa/sleep.S | 5 +- arch/arm/mach-pxa/smemc.c | 11 +- arch/arm/mach-pxa/spitz.c | 33 ++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 1 - .../arm/mach-pxa/stargate2-pcmcia.c | 2 +- arch/arm/mach-pxa/tosa.c | 63 +++++- .../arm/mach-pxa/trizeps4-pcmcia.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 4 +- .../mach-pxa/{include/mach => }/trizeps4.h | 3 +- .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 11 + arch/arm/mach-pxa/zeus.c | 6 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 123 ++++++------ drivers/input/touchscreen/zylonite-wm97xx.c | 34 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 89 +++------ drivers/pcmcia/Makefile | 16 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/backlight/tosa_bl.c | 10 +- drivers/video/backlight/tosa_bl.h | 8 + drivers/video/backlight/tosa_lcd.c | 28 ++- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 42 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 205 files changed, 1916 insertions(+), 1795 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (99%) rename drivers/pcmcia/pxa2xx_cm_x255.c => arch/arm/mach-pxa/cm_x255-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x270.c => arch/arm/mach-pxa/cm_x270-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x2xx.c => arch/arm/mach-pxa/cm_x2xx-pcmcia.c (96%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (99%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (99%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (98%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (98%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (98%) rename arch/arm/{common/it8152.c => mach-pxa/pci-it8152.c} (95%) rename arch/arm/{include/asm/hardware/it8152.h => mach-pxa/pci-it8152.h} (98%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (97%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (99%) rename drivers/pcmcia/pxa2xx_stargate2.c => arch/arm/mach-pxa/stargate2-pcmcia.c (99%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (98%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) create mode 100644 drivers/video/backlight/tosa_bl.h rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.20.0

9 53

[PATCH 1/4] ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
by Jeremy Szu 08 Feb '22

08 Feb '22

The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the fixup, the mute/micmute LEDs work good. Signed-off-by: Jeremy Szu <jeremy.szu(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 552e2cb73291..9d68f591c6bf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8291,6 +8291,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x884c, "HP EliteBook 840 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), -- 2.31.1

3 5

[PATCH] ALSA: pcm: comment about relation between msbits hw parameter and [S|U32] formats
by Takashi Sakamoto 13 Dec '21

13 Dec '21

Regarding to handling [U|S][32|24] PCM formats, many userspace application developers and driver developers have confusion, since they require them to understand justification or padding. It easily loses consistency and soundness to operate with many type of devices. In this commit, I attempt to solve the situation by adding comment about relation between [S|U]32 formats and 'msbits' hardware parameter. The formats are used for 'left-justified' sample format, and the available bit count in most significant bit is delivered to userspace in msbits hardware parameter (struct snd_pcm_hw_params.msbits), which is decided by msbits constraint added by pcm drivers (snd_pcm_hw_constraint_msbits()). In driver side, the msbits constraint includes two elements; the physical width of format and the available width of the format in most significant bit. The former is used to match SAMPLE_BITS of format. (For my convenience, I ignore wildcard in the usage of the constraint.) As a result of interaction between ALSA pcm core and ALSA pcm application, when the format in which SAMPLE_BITS equals to physical width of the msbits constaint, the msbits parameter is set by referring to the available width of the constraint. When the msbits parameter is not changed in the above process, ALSA pcm core set it alternatively with SAMPLE_BIT of chosen format. In userspace application side, the msbits is only available after calling ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS request. Even if the hardware parameter structure includes somewhat value of SAMPLE_BITS interval parameter as width of format, all of the width is not always available since msbits can be less than the width. I note that [S|U24] formats are used for 'right-justified' 24 bit sample formats within 32 bit frame. The first byte in most significant bit should be invalidated. Although the msbits exposed to userspace should be zero as invalid value, actually it is 32 from physical width of format. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- include/sound/pcm.h | 3 +++ include/uapi/sound/asound.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 2e1200d17d0c..b84ff6e4ee53 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -147,6 +147,9 @@ struct snd_pcm_ops { #define SNDRV_PCM_FMTBIT_S24_BE _SNDRV_PCM_FMTBIT(S24_BE) #define SNDRV_PCM_FMTBIT_U24_LE _SNDRV_PCM_FMTBIT(U24_LE) #define SNDRV_PCM_FMTBIT_U24_BE _SNDRV_PCM_FMTBIT(U24_BE) +// For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the +// available bit count in most significant bit. It's for the case of so-called 'left-justified' or +// `right-padding` sample which has less width than 32 bit. #define SNDRV_PCM_FMTBIT_S32_LE _SNDRV_PCM_FMTBIT(S32_LE) #define SNDRV_PCM_FMTBIT_S32_BE _SNDRV_PCM_FMTBIT(S32_BE) #define SNDRV_PCM_FMTBIT_U32_LE _SNDRV_PCM_FMTBIT(U32_LE) diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index d17c061950df..b43ea0067e1f 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -202,6 +202,9 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_S24_BE ((__force snd_pcm_format_t) 7) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_LE ((__force snd_pcm_format_t) 8) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_BE ((__force snd_pcm_format_t) 9) /* low three bytes */ +// For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the +// available bit count in most significant bit. It's for the case of so-called 'left-justified' or +// `right-padding` sample which has less width than 32 bit. #define SNDRV_PCM_FORMAT_S32_LE ((__force snd_pcm_format_t) 10) #define SNDRV_PCM_FORMAT_S32_BE ((__force snd_pcm_format_t) 11) #define SNDRV_PCM_FORMAT_U32_LE ((__force snd_pcm_format_t) 12) -- 2.27.0

2 5

[PATCH v2] ASoC: amd: Convert to new style DAI format definitions
by Mark Brown 09 Dec '21

09 Dec '21

Convert the AMD machine drivers to use the new style defines for clocking in DAI formats. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/amd/acp-da7219-max98357a.c | 20 ++++++++++---------- sound/soc/amd/acp-rt5645.c | 4 ++-- sound/soc/amd/acp3x-rt5682-max9836.c | 8 ++++---- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index b2065f3fe42c..3bf86c2424ae 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -522,7 +522,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-da7219-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_da7219_init, .dpcm_playback = 1, .stop_dma_first = 1, @@ -533,7 +533,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-da7219-cap", .stream_name = "Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_da7219_cap_ops, @@ -543,7 +543,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_playback = 1, .stop_dma_first = 1, .ops = &cz_max_play_ops, @@ -554,7 +554,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "dmic0", .stream_name = "DMIC0 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_dmic0_cap_ops, @@ -565,7 +565,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "dmic1", .stream_name = "DMIC1 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_dmic1_cap_ops, @@ -578,7 +578,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-rt5682-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_rt5682_init, .dpcm_playback = 1, .stop_dma_first = 1, @@ -589,7 +589,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-rt5682-cap", .stream_name = "Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_cap_ops, @@ -599,7 +599,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "amd-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_playback = 1, .stop_dma_first = 1, .ops = &cz_rt5682_max_play_ops, @@ -610,7 +610,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "dmic0", .stream_name = "DMIC0 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_dmic0_cap_ops, @@ -621,7 +621,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = { .name = "dmic1", .stream_name = "DMIC1 Capture", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .dpcm_capture = 1, .stop_dma_first = 1, .ops = &cz_rt5682_dmic1_cap_ops, diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index d6ba94677ac2..58b75cf399fc 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -111,7 +111,7 @@ static struct snd_soc_dai_link cz_dai_rt5650[] = { .name = "amd-rt5645-play", .stream_name = "RT5645_AIF1", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = cz_init, .ops = &cz_aif1_ops, SND_SOC_DAILINK_REG(designware1, codec, platform), @@ -120,7 +120,7 @@ static struct snd_soc_dai_link cz_dai_rt5650[] = { .name = "amd-rt5645-cap", .stream_name = "RT5645_AIF1", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .ops = &cz_aif1_ops, SND_SOC_DAILINK_REG(designware2, codec, platform), }, diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e561464f7d60..dad70436d063 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -51,7 +51,7 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd) /* set rt5682 dai fmt */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM); + | SND_SOC_DAIFMT_CBP_CFP); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set rt5682 dai fmt: %d\n", ret); @@ -302,7 +302,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-5682-play", .stream_name = "Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .init = acp3x_5682_init, .dpcm_playback = 1, .dpcm_capture = 1, @@ -313,7 +313,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-max98357-play", .stream_name = "HiFi Playback", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, + | SND_SOC_DAIFMT_CBC_CFC, .dpcm_playback = 1, .ops = &acp3x_max_play_ops, .cpus = acp3x_bt, @@ -325,7 +325,7 @@ static struct snd_soc_dai_link acp3x_dai[] = { .name = "acp3x-ec-dmic0-capture", .stream_name = "Capture DMIC0", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, + | SND_SOC_DAIFMT_CBC_CFC, .dpcm_capture = 1, .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), -- 2.20.1

1 1

[PATCH 0/2] ASoC: mediatek: Add support for MT8195 sound card with rt1011 and rt5682
by Trevor Wu 29 Oct '21

29 Oct '21

This series of patches adds support for mt8195 board with mt6359, rt1011 and rt5682. Patches are based on broonie tree "for-next" branch. Trevor Wu (2): ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682 dt-bindings: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 document .../sound/mt8195-mt6359-rt1011-rt5682.yaml | 47 + sound/soc/mediatek/Kconfig | 15 + sound/soc/mediatek/mt8195/Makefile | 1 + .../mt8195/mt8195-mt6359-rt1011-rt5682.c | 1140 +++++++++++++++++ 4 files changed, 1203 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-rt1011-rt5682.c -- 2.18.0

3 8