June 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH 05/14] ALSA: usb-audio: scarlett2: Remove interrupt debug message
by Geoffrey D. Bennett 20 Jun '21

20 Jun '21

Just ignore instead of printing an error if the interrupt data is not the expected length. This check was for development and the condition has not been observed. Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index a5f5c537e344..3225ec709d98 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -2018,19 +2018,14 @@ static void scarlett2_mixer_interrupt(struct urb *urb) int ustatus = urb->status; u32 data; - if (ustatus != 0) + if (ustatus != 0 || len != 8) goto requeue; - if (len == 8) { - data = le32_to_cpu(*(__le32 *)urb->transfer_buffer); - if (data & SCARLETT2_USB_INTERRUPT_VOL_CHANGE) - scarlett2_mixer_interrupt_vol_change(mixer); - if (data & SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE) - scarlett2_mixer_interrupt_button_change(mixer); - } else { - usb_audio_err(mixer->chip, - "scarlett mixer interrupt length %d\n", len); - } + data = le32_to_cpu(*(__le32 *)urb->transfer_buffer); + if (data & SCARLETT2_USB_INTERRUPT_VOL_CHANGE) + scarlett2_mixer_interrupt_vol_change(mixer); + if (data & SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE) + scarlett2_mixer_interrupt_button_change(mixer); requeue: if (ustatus != -ENOENT && -- 2.31.1

1 0

[PATCH 04/14] ALSA: usb-audio: scarlett2: Remove unused/useless code
by Geoffrey D. Bennett 20 Jun '21

20 Jun '21

Remove #define not used. Remove useless assignments and copies. Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 8026847d27b6..a5f5c537e344 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -271,7 +271,6 @@ static const struct scarlett2_device_info s6i6_gen2_info = { .id = 0x000, .num = { 1, 0, 8, 8, 8 }, .src_descr = "Off", - .src_num_offset = 0, }, [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, @@ -327,7 +326,6 @@ static const struct scarlett2_device_info s18i8_gen2_info = { .id = 0x000, .num = { 1, 0, 8, 8, 4 }, .src_descr = "Off", - .src_num_offset = 0, }, [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, @@ -393,7 +391,6 @@ static const struct scarlett2_device_info s18i20_gen2_info = { .id = 0x000, .num = { 1, 0, 8, 8, 6 }, .src_descr = "Off", - .src_num_offset = 0, }, [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, @@ -571,8 +568,6 @@ struct scarlett2_usb_packet { u8 data[]; }; -#define SCARLETT2_USB_PACKET_LEN (sizeof(struct scarlett2_usb_packet)) - static void scarlett2_fill_request_header(struct scarlett2_mixer_data *private, struct scarlett2_usb_packet *req, u32 cmd, u16 req_size) @@ -595,8 +590,8 @@ static int scarlett2_usb( struct scarlett2_mixer_data *private = mixer->private_data; u16 req_buf_size = sizeof(struct scarlett2_usb_packet) + req_size; u16 resp_buf_size = sizeof(struct scarlett2_usb_packet) + resp_size; - struct scarlett2_usb_packet *req = NULL, *resp = NULL; - int err = 0; + struct scarlett2_usb_packet *req, *resp = NULL; + int err; req = kmalloc(req_buf_size, GFP_KERNEL); if (!req) { @@ -1026,10 +1021,6 @@ static int scarlett2_usb_set_mux(struct usb_mixer_interface *mixer) ports, private->mux[j] ) << 12 ); - - /* skip private->mux[j] entries not output */ - j += ports[port_type].num[SCARLETT2_PORT_OUT] - - ports[port_type].num[port_dir_rate]; } err = scarlett2_usb(mixer, SCARLETT2_USB_SET_MUX, @@ -1681,7 +1672,7 @@ static int scarlett2_add_mixer_ctls(struct usb_mixer_interface *mixer) int num_inputs = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_OUT]; int num_outputs = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_IN]; - for (i = 0, index = 0; i < num_outputs; i++) { + for (i = 0, index = 0; i < num_outputs; i++) for (j = 0; j < num_inputs; j++, index++) { snprintf(s, sizeof(s), "Mix %c Input %02d Playback Volume", @@ -1691,7 +1682,6 @@ static int scarlett2_add_mixer_ctls(struct usb_mixer_interface *mixer) if (err < 0) return err; } - } return 0; } @@ -1925,8 +1915,6 @@ static int scarlett2_read_configs(struct usb_mixer_interface *mixer) ports[SCARLETT2_PORT_TYPE_ANALOGUE].num[SCARLETT2_PORT_OUT]; int num_mixer_out = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_IN]; - u8 level_switches[SCARLETT2_LEVEL_SWITCH_MAX]; - u8 pad_switches[SCARLETT2_PAD_SWITCH_MAX]; struct scarlett2_usb_volume_status volume_status; int err, i; @@ -1935,11 +1923,9 @@ static int scarlett2_read_configs(struct usb_mixer_interface *mixer) mixer, SCARLETT2_CONFIG_LEVEL_SWITCH, info->level_input_count, - level_switches); + private->level_switch); if (err < 0) return err; - for (i = 0; i < info->level_input_count; i++) - private->level_switch[i] = level_switches[i]; } if (info->pad_input_count) { @@ -1947,11 +1933,9 @@ static int scarlett2_read_configs(struct usb_mixer_interface *mixer) mixer, SCARLETT2_CONFIG_PAD_SWITCH, info->pad_input_count, - pad_switches); + private->pad_switch); if (err < 0) return err; - for (i = 0; i < info->pad_input_count; i++) - private->pad_switch[i] = pad_switches[i]; } err = scarlett2_usb_get_volume_status(mixer, &volume_status); -- 2.31.1

1 0

[PATCH 03/14] ALSA: usb-audio: scarlett2: Coding style improvements
by Geoffrey D. Bennett 20 Jun '21

20 Jun '21

Improve alignment and readability with: - Whitespace fixes - Add leading zeros to 32-bit flag values - Rename SCARLETT2_USB_GET_METER_LEVELS to SCARLETT2_USB_GET_METER - Rename SCARLETT2_PORT_DIRECTIONS to SCARLETT2_PORT_DIRNS Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 53 +++++++++++++++++---------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index e327f15b89ce..8026847d27b6 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -175,23 +175,23 @@ static const u16 scarlett2_mixer_values[SCARLETT2_MIXER_VALUE_COUNT] = { * - PCM I/O */ enum { - SCARLETT2_PORT_TYPE_NONE = 0, + SCARLETT2_PORT_TYPE_NONE = 0, SCARLETT2_PORT_TYPE_ANALOGUE = 1, - SCARLETT2_PORT_TYPE_SPDIF = 2, - SCARLETT2_PORT_TYPE_ADAT = 3, - SCARLETT2_PORT_TYPE_MIX = 4, - SCARLETT2_PORT_TYPE_PCM = 5, - SCARLETT2_PORT_TYPE_COUNT = 6, + SCARLETT2_PORT_TYPE_SPDIF = 2, + SCARLETT2_PORT_TYPE_ADAT = 3, + SCARLETT2_PORT_TYPE_MIX = 4, + SCARLETT2_PORT_TYPE_PCM = 5, + SCARLETT2_PORT_TYPE_COUNT = 6, }; /* Count of total I/O and number available at each sample rate */ enum { - SCARLETT2_PORT_IN = 0, - SCARLETT2_PORT_OUT = 1, - SCARLETT2_PORT_OUT_44 = 2, - SCARLETT2_PORT_OUT_88 = 3, + SCARLETT2_PORT_IN = 0, + SCARLETT2_PORT_OUT = 1, + SCARLETT2_PORT_OUT_44 = 2, + SCARLETT2_PORT_OUT_88 = 3, SCARLETT2_PORT_OUT_176 = 4, - SCARLETT2_PORT_DIRECTIONS = 5, + SCARLETT2_PORT_DIRNS = 5, }; /* Hardware buttons on the 18i20 */ @@ -210,7 +210,7 @@ static const char *const scarlett2_button_names[SCARLETT2_BUTTON_MAX] = { */ struct scarlett2_ports { u16 id; - int num[SCARLETT2_PORT_DIRECTIONS]; + int num[SCARLETT2_PORT_DIRNS]; const char * const src_descr; int src_num_offset; const char * const dst_descr; @@ -458,22 +458,23 @@ static int scarlett2_get_port_start_num(const struct scarlett2_ports *ports, #define SCARLETT2_USB_INTERRUPT_INTERVAL 3 /* Interrupt flags for volume and mute/dim button changes */ -#define SCARLETT2_USB_INTERRUPT_VOL_CHANGE 0x400000 -#define SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE 0x200000 +#define SCARLETT2_USB_INTERRUPT_VOL_CHANGE 0x00400000 +#define SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE 0x00200000 /* Commands for sending/receiving requests/responses */ -#define SCARLETT2_USB_VENDOR_SPECIFIC_CMD_REQ 2 +#define SCARLETT2_USB_VENDOR_SPECIFIC_CMD_REQ 2 #define SCARLETT2_USB_VENDOR_SPECIFIC_CMD_RESP 3 -#define SCARLETT2_USB_INIT_SEQ 0x00000000 -#define SCARLETT2_USB_GET_METER_LEVELS 0x00001001 -#define SCARLETT2_USB_GET_MIX 0x00002001 -#define SCARLETT2_USB_SET_MIX 0x00002002 -#define SCARLETT2_USB_GET_MUX 0x00003001 -#define SCARLETT2_USB_SET_MUX 0x00003002 -#define SCARLETT2_USB_GET_DATA 0x00800000 -#define SCARLETT2_USB_SET_DATA 0x00800001 -#define SCARLETT2_USB_DATA_CMD 0x00800002 +#define SCARLETT2_USB_INIT_SEQ 0x00000000 +#define SCARLETT2_USB_GET_METER 0x00001001 +#define SCARLETT2_USB_GET_MIX 0x00002001 +#define SCARLETT2_USB_SET_MIX 0x00002002 +#define SCARLETT2_USB_GET_MUX 0x00003001 +#define SCARLETT2_USB_SET_MUX 0x00003002 +#define SCARLETT2_USB_GET_DATA 0x00800000 +#define SCARLETT2_USB_SET_DATA 0x00800001 +#define SCARLETT2_USB_DATA_CMD 0x00800002 + #define SCARLETT2_USB_CONFIG_SAVE 6 #define SCARLETT2_USB_VOLUME_STATUS_OFFSET 0x31 @@ -835,7 +836,7 @@ static int scarlett2_usb_get_mix(struct usb_mixer_interface *mixer, * (values obtained from private->mix[]) */ static int scarlett2_usb_set_mix(struct usb_mixer_interface *mixer, - int mix_num) + int mix_num) { struct scarlett2_mixer_data *private = mixer->private_data; const struct scarlett2_device_info *info = private->info; @@ -1056,7 +1057,7 @@ static int scarlett2_usb_get_meter_levels(struct usb_mixer_interface *mixer, req.pad = 0; req.num_meters = cpu_to_le16(SCARLETT2_NUM_METERS); req.magic = cpu_to_le32(SCARLETT2_USB_METER_LEVELS_GET_MAGIC); - err = scarlett2_usb(mixer, SCARLETT2_USB_GET_METER_LEVELS, + err = scarlett2_usb(mixer, SCARLETT2_USB_GET_METER, &req, sizeof(req), resp, sizeof(resp)); if (err < 0) return err; -- 2.31.1

1 0

[PATCH 02/14] ALSA: usb-audio: scarlett2: Fix 18i8 Gen 2 PCM Input count
by Geoffrey D. Bennett 20 Jun '21

20 Jun '21

The 18i8 Gen 2 has 8 PCM Inputs, not 20. Fix the ports entry in s18i8_gen2_info. Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 962050436a9f..e327f15b89ce 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -358,7 +358,7 @@ static const struct scarlett2_device_info s18i8_gen2_info = { }, [SCARLETT2_PORT_TYPE_PCM] = { .id = 0x600, - .num = { 20, 18, 18, 14, 10 }, + .num = { 8, 18, 18, 14, 10 }, .src_descr = "PCM %d", .src_num_offset = 1, .dst_descr = "PCM %02d Capture" -- 2.31.1

1 0

[PATCH 01/14] ALSA: usb-audio: scarlett2: Remove incorrect S/PDIF comment
by Geoffrey D. Bennett 20 Jun '21

20 Jun '21

The 18i8 Gen 2 S/PDIF outputs are available at 192kHz, unlike the 18i20 Gen 2. Remove the comment that says otherwise. Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index a461317dc8c6..962050436a9f 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -338,10 +338,6 @@ static const struct scarlett2_device_info s18i8_gen2_info = { }, [SCARLETT2_PORT_TYPE_SPDIF] = { .id = 0x180, - /* S/PDIF outputs aren't available at 192kHz - * but are included in the USB mux I/O - * assignment message anyway - */ .num = { 2, 2, 2, 2, 2 }, .src_descr = "S/PDIF %d", .src_num_offset = 1, -- 2.31.1

1 0

[PATCH AUTOSEL 5.12 11/33] ASoC: AMD Renoir - add DMI entry for Lenovo 2020 AMD platforms
by Sasha Levin 20 Jun '21

20 Jun '21

From: Mark Pearson <markpearson(a)lenovo.com> [ Upstream commit 19a0aa9b04c5ab9a063b6ceaf7211ee7d9a9d24d ] More laptops identified where the AMD ACP bridge needs to be blocked or the microphone will not work when connected to HDMI. Use DMI to block the microphone PCM device for these platforms. Suggested-by: Gabriel Craciunescu <nix.or.die(a)gmail.com> Signed-off-by: Mark Pearson <markpearson(a)lenovo.com> Link: https://lore.kernel.org/r/20210531145502.6079-1-markpearson@lenovo.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/renoir/rn-pci-acp3x.c | 35 +++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/sound/soc/amd/renoir/rn-pci-acp3x.c b/sound/soc/amd/renoir/rn-pci-acp3x.c index 050a61fe9693..47a4dfd81a46 100644 --- a/sound/soc/amd/renoir/rn-pci-acp3x.c +++ b/sound/soc/amd/renoir/rn-pci-acp3x.c @@ -199,6 +199,41 @@ static const struct dmi_system_id rn_acp_quirk_table[] = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "20NLCTO1WW"), } }, + { + /* Lenovo ThinkPad P14s Gen 1 (20Y1) */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "20Y1"), + } + }, + { + /* Lenovo ThinkPad T14s Gen1 */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "20UH"), + } + }, + { + /* Lenovo ThinkPad T14s Gen1 Campus */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "20UJ"), + } + }, + { + /* Lenovo ThinkPad T14 Gen 1*/ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "20UD"), + } + }, + { + /* Lenovo ThinkPad X13 Gen 1*/ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "20UF"), + } + }, {} }; -- 2.30.2

2 2

[PATCH] soundwire: stream: Fix test for DP prepare complete
by Richard Fitzgerald 20 Jun '21

20 Jun '21

In sdw_prep_deprep_slave_ports(), after the wait_for_completion() the DP prepare status register is read. If this indicates that the port is now prepared, the code should continue with the port setup. It is irrelevant whether the wait_for_completion() timed out if the port is now ready. The previous implementation would always fail if the wait_for_completion() timed out, even if the port was reporting successful prepare. This patch also fixes a minor bug where the return from sdw_read() was not checked for error - any error code with LSBits clear could be misinterpreted as a successful port prepare. Fixes: 79df15b7d37c ("soundwire: Add helpers for ports operations") Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/stream.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 1eaedaaba094..1a18308f4ef4 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -422,7 +422,6 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, struct completion *port_ready; struct sdw_dpn_prop *dpn_prop; struct sdw_prepare_ch prep_ch; - unsigned int time_left; bool intr = false; int ret = 0, val; u32 addr; @@ -479,15 +478,15 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, /* Wait for completion on port ready */ port_ready = &s_rt->slave->port_ready[prep_ch.num]; - time_left = wait_for_completion_timeout(port_ready, - msecs_to_jiffies(dpn_prop->ch_prep_timeout)); + wait_for_completion_timeout(port_ready, + msecs_to_jiffies(dpn_prop->ch_prep_timeout)); val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num)); - val &= p_rt->ch_mask; - if (!time_left || val) { + if ((val < 0) || (val & p_rt->ch_mask)) { + ret = (val < 0) ? val : -ETIMEDOUT; dev_err(&s_rt->slave->dev, - "Chn prep failed for port:%d\n", prep_ch.num); - return -ETIMEDOUT; + "Chn prep failed for port %d: %d\n", prep_ch.num, ret); + return ret; } } -- 2.20.1

3 2

[PATCH v2] soundwire: bus: Make sdw_nwrite() data pointer argument const
by Richard Fitzgerald 20 Jun '21

20 Jun '21

Idiomatically, write functions should take const pointers to the data buffer, as they don't change the data. They are also likely to be called from functions that receive a const data pointer. Internally the pointer is passed to function/structs shared with the read functions, requiring a cast, but this is an implementation detail that should be hidden by the public API. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/bus.c | 8 ++++---- include/linux/soundwire/sdw.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a9e0aa72654d..49c66deba106 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -394,13 +394,13 @@ sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) } static int -sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val) { struct sdw_msg msg; int ret; ret = sdw_fill_msg(&msg, slave, addr, count, - slave->dev_num, SDW_MSG_FLAG_WRITE, val); + slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val); if (ret < 0) return ret; @@ -535,9 +535,9 @@ EXPORT_SYMBOL(sdw_nread); * @slave: SDW Slave * @addr: Register address * @count: length - * @val: Buffer for values to be read + * @val: Buffer for values to be written */ -int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val) { int ret; diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index ced07f8fde87..ee45d2984334 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -1040,7 +1040,7 @@ int sdw_write(struct sdw_slave *slave, u32 addr, u8 value); int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value); int sdw_read_no_pm(struct sdw_slave *slave, u32 addr); int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); -int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val); int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id); -- 2.20.1

2 1

[PATCH] ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431D
by Takashi Iwai 20 Jun '21

20 Jun '21

Asus Zenbook 14 UM431D has two speaker pins and a headphone pin, and the auto-parser ends up assigning the bass to the third DAC 0x06. Although the tone comes out, it's inconvenient because this DAC has no volume control unlike two other DACs. For obtaining the volume control for the bass speaker, this patch enforces the mapping to let both front and bass speaker pins sharing the same DAC. It's not ideal but a little bit of improvement. Since we've already applied the same workaround for another ASUS machine, we just need to hook the chain to the existing quirk. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212547 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 07eabcf22b5f..49f4cac8b05e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7839,6 +7839,8 @@ static const struct hda_fixup alc269_fixups[] = { { 0x20, AC_VERB_SET_PROC_COEF, 0x4e4b }, { } }, + .chained = true, + .chain_id = ALC289_FIXUP_ASUS_GA401, }, [ALC285_FIXUP_HP_GPIO_LED] = { .type = HDA_FIXUP_FUNC, -- 2.26.2

1 0

[PATCH] ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxx
by Elia Devito 20 Jun '21

20 Jun '21

On HP Spectre x360 15-df0xxx, after system boot with plugged headset, the headset mic are not detected. Moving pincfg and DAC's config to single fixup function fix this. Signed-off-by: Elia Devito <eliadevito(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 59d0936377eb..07eabcf22b5f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6354,6 +6354,24 @@ static void alc_fixup_no_int_mic(struct hda_codec *codec, } } +static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + static const hda_nid_t conn[] = { 0x02 }; + static const struct hda_pintbl pincfgs[] = { + { 0x14, 0x90170110 }, /* rear speaker */ + { } + }; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + snd_hda_apply_pincfgs(codec, pincfgs); + /* force front speaker to DAC1 */ + snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn); + break; + } +} + /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" @@ -8138,13 +8156,8 @@ static const struct hda_fixup alc269_fixups[] = { .chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED, }, [ALC285_FIXUP_HP_SPECTRE_X360] = { - .type = HDA_FIXUP_PINS, - .v.pins = (const struct hda_pintbl[]) { - { 0x14, 0x90170110 }, /* enable top speaker */ - {} - }, - .chained = true, - .chain_id = ALC285_FIXUP_SPEAKER2_TO_DAC1, + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_hp_spectre_x360, }, [ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = { .type = HDA_FIXUP_FUNC, -- 2.31.1

2 1