June 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 00/10] ASoC: Intel: machine driver corrections
by Pierre-Louis Bossart 22 Jun '21

22 Jun '21

Some of these patches dealing with Sparse warnings were submitted earlier but not merged. I grouped them with a couple of fixes from Kai. v2: added Mark Brown in CC, was missed in v1 added Richard Fitzgerald Tested-by Kai Vehmanen (3): ASoC: Intel: sof_sdw: use mach data for ADL RVP DMIC count ASoC: Intel: sof_sdw: remove hdac-hdmi support ASoC: Intel: skl_hda_dsp_generic: Update Kconfig documentation Pierre-Louis Bossart (7): ASoC: Intel: sof_rt5682: shrink platform_id names below 20 characters ASoC: Intel: glk_rt5682_max98357a: shrink platform_id below 20 characters ASoC: Intel: kbl_da7219_max98357a: shrink platform_id below 20 characters ASoC: Intel: sof_da7219_max98373: shrink platform_id below 20 characters ASoC: Intel: sof_sdw: fix signed/unsigned warning ASoC: Intel: soc-acpi: add ull suffix for SoundWire _ADR values ASoC: Intel: use MODULE_DEVICE_TABLE with platform_device_id tables sound/soc/intel/boards/Kconfig | 7 ++-- sound/soc/intel/boards/bxt_da7219_max98357a.c | 4 +- sound/soc/intel/boards/bxt_rt298.c | 3 +- sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 4 +- sound/soc/intel/boards/kbl_da7219_max98357a.c | 4 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 5 +-- sound/soc/intel/boards/kbl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 3 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +- .../soc/intel/boards/skl_nau88l25_max98357a.c | 3 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 3 +- sound/soc/intel/boards/skl_rt286.c | 3 +- sound/soc/intel/boards/sof_cs42l42.c | 3 +- sound/soc/intel/boards/sof_da7219_max98373.c | 6 +-- sound/soc/intel/boards/sof_rt5682.c | 20 +++------- sound/soc/intel/boards/sof_sdw.c | 5 +-- sound/soc/intel/boards/sof_sdw_common.h | 1 - sound/soc/intel/boards/sof_sdw_hdmi.c | 37 +----------------- .../intel/common/soc-acpi-intel-adl-match.c | 28 +++++++------- .../intel/common/soc-acpi-intel-cml-match.c | 20 +++++----- .../intel/common/soc-acpi-intel-cnl-match.c | 2 +- .../intel/common/soc-acpi-intel-glk-match.c | 2 +- .../intel/common/soc-acpi-intel-icl-match.c | 12 +++--- .../intel/common/soc-acpi-intel-jsl-match.c | 6 +-- .../intel/common/soc-acpi-intel-kbl-match.c | 2 +- .../intel/common/soc-acpi-intel-tgl-match.c | 38 +++++++++---------- 27 files changed, 83 insertions(+), 144 deletions(-) -- 2.25.1

2 11

[PATCH 1/2] ASoC: codecs: wcd938x: fix unused variable warning
by Srinivas Kandagatla 22 Jun '21

22 Jun '21

This patch fixes below warning: unused variable wcd938x_dt_match by placing device match table under CONFIG_OF Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/codecs/wcd938x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c index 4be61122b0b5..427f51fade37 100644 --- a/sound/soc/codecs/wcd938x.c +++ b/sound/soc/codecs/wcd938x.c @@ -3714,12 +3714,14 @@ static int wcd938x_remove(struct platform_device *pdev) return 0; } +#if defined(CONFIG_OF) static const struct of_device_id wcd938x_dt_match[] = { { .compatible = "qcom,wcd9380-codec" }, { .compatible = "qcom,wcd9385-codec" }, {} }; MODULE_DEVICE_TABLE(of, wcd938x_dt_match); +#endif static struct platform_driver wcd938x_codec_driver = { .probe = wcd938x_probe, -- 2.21.0

2 2

[PATCH RFC 00/15] ASoC: add Audio Graph Card2 driver
by Kuninori Morimoto 22 Jun '21

22 Jun '21

Hi Mark, Rob We already have Audio-Graph-Card which is Of-Graph base general sound card driver. Basically it supports basic CPU-Codec connection, and is also supporting DPCM connection. Because it was forcibly expanded to DPCM, DT parsing is very limited and very difficult to add new features on it, for example Multi CPU/Codec support, Codec2Codec support, etc. And some users want to use Audio-Graph-Card as basic connection and expand its own settings on it. This patch adds more flexible new Audio-Graph-Card2 driver for it. Audio-Graph-Card and Audio-Graph-Card2 are similar, but don't have full compatibility. Audio-Graph-Card2 supports Normal Connection, DPCM Connection, Multi CPU/Codec Connection, Codec2Codec Connection, and possible to Customizing. This patch-set adds Audio-Graph-Card2 driver and customized driver sample, and DT settings sample which can be used for testing. To enable testing/debuging, this patch-set also adds Test-Component driver. We already have Dummy Component and/or Dummy DAI on soc-utils, but 1) we can't use it from DT, 2) it do nothing. Added new Test-Component can be used from DT, and it indicates called function name. We can use it to trace callback order / understanding ALSA SoC behavior, etc. Sample DT settings which can be used for testing is using Test-Component. This patch set includes sample DT for custome driver and/or audio-graph-card2. You can easily try to use/test it if you added below line to your DT file. It needs below CONFIGs. It will probe sample Sound Card which has Normal/DPCM/Multi/Codec2Codec connections. #include "../../../../../sound/soc/generic/audio-graph-card2-sample.dtsi" CONFIG_SND_AUDIO_GRAPH_CARD2 CONFIG_SND_SAMPLE_CUSTOM_CARD CONFIG_SND_TEST_COMPONENT There are some notes. Because Audio Graph Card2 is still under experimental stage, it will indicate such warning when probing, and the DT might be updated/exchanged. It can use Codec2Codec, but it will start automatically when probed, and can't stop it so far. It should be updated. 1 : add Of-Graph *port base* loop which is used at Audio-Graph-Card2 2 - 3 : add Test-Component driver 4 - 10 : add Audio-Graph-Card2 driver 11 : add Audio-Graph-Card2 base custome driver sample 12 - 15 : Audio-Graph-Card2 driver / custome driver DT sample Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (15): 1 of: property: add port base loop 2 ASoC: dt-bindings: test-component: add Test Component YAML bindings 3 ASoC: test-component: add Test Component for Sound debug/test 4 ASoC: simple-card-utils: add asoc_graph_is_ports0() 5 ASoC: simple-card-utils: add codec2codec support 6 ASoC: audio-graph-card2: add Audio Graph Card2 driver 7 ASoC: audio-graph-card2: add DPCM support 8 ASoC: audio-graph-card2: add Multi CPU/Codec support 9 ASoC: audio-graph-card2: add Codec2Codec support 10 ASoC: audio-graph-card2: add Yaml Document 11 ASoC: sample-custom-card: add Audio Graph Card2 custome sample 12 ASoC: audio-graph-card2-sample.dtsi: add Sample DT for Audio Graph Card2 13 ASoC: audio-graph-card2-sample.dtsi: add DPCM sample 14 ASoC: audio-graph-card2-sample.dtsi: add Multi CPU/Codec sample 15 ASoC: audio-graph-card2-sample.dtsi: add Codec2Codec sample. .../sound/audio-graph-card2-items.yaml | 36 + .../bindings/sound/audio-graph-card2.yaml | 45 + .../bindings/sound/audio-graph-port2.yaml | 74 + .../bindings/sound/test-component.yaml | 33 + drivers/of/property.c | 69 +- include/linux/of_graph.h | 14 + include/sound/graph_card.h | 24 + include/sound/simple_card_utils.h | 4 + sound/soc/generic/Kconfig | 20 + sound/soc/generic/Makefile | 6 + .../soc/generic/audio-graph-card2-sample.dtsi | 140 ++ sound/soc/generic/audio-graph-card2.c | 1253 +++++++++++++++++ sound/soc/generic/sample-custom-card.c | 160 +++ sound/soc/generic/simple-card-utils.c | 46 +- sound/soc/generic/test-component.c | 659 +++++++++ 15 files changed, 2572 insertions(+), 11 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card2-items.yaml create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card2.yaml create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-port2.yaml create mode 100644 Documentation/devicetree/bindings/sound/test-component.yaml create mode 100644 sound/soc/generic/audio-graph-card2-sample.dtsi create mode 100644 sound/soc/generic/audio-graph-card2.c create mode 100644 sound/soc/generic/sample-custom-card.c create mode 100644 sound/soc/generic/test-component.c -- 2.25.1

2 17

[PATCH] pci: hda: Add IRQ check for platform_get_irq()
by Jiajun Cao 22 Jun '21

22 Jun '21

The function hda_tegra_first_init() neglects to check the return value after executing platform_get_irq(). hda_tegra_first_init() should check the return value (if negative error number) for errors so as to not pass a negative value to the devm_request_irq(). Fix it by adding a check for the return value irq_id. Signed-off-by: Jiajun Cao <jjcao20(a)fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf(a)gmail.com> --- sound/pci/hda/hda_tegra.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 6f2b743b9d75..6c6dc3fcde60 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -262,6 +262,9 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) const char *sname, *drv_name = "tegra-hda"; struct device_node *np = pdev->dev.of_node; + if (irq_id < 0) + return irq_id; + err = hda_tegra_init_chip(chip, pdev); if (err) return err; -- 2.17.1

3 2

[PATCH] dt-bindings: Drop redundant minItems/maxItems
by Rob Herring 22 Jun '21

22 Jun '21

If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending. Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: David Airlie <airlied(a)linux.ie> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Cc: Kamal Dasu <kdasu.kdev(a)gmail.com> Cc: Jonathan Cameron <jic23(a)kernel.org> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Marc Zyngier <maz(a)kernel.org> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: Jassi Brar <jassisinghbrar(a)gmail.com> Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Cc: Ulf Hansson <ulf.hansson(a)linaro.org> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: Andrew Lunn <andrew(a)lunn.ch> Cc: Vivien Didelot <vivien.didelot(a)gmail.com> Cc: Vladimir Oltean <olteanv(a)gmail.com> Cc: Bjorn Helgaas <bhelgaas(a)google.com> Cc: Kishon Vijay Abraham I <kishon(a)ti.com> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: "Uwe Kleine-König" <u.kleine-koenig(a)pengutronix.de> Cc: Lee Jones <lee.jones(a)linaro.org> Cc: Ohad Ben-Cohen <ohad(a)wizery.com> Cc: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Philipp Zabel <p.zabel(a)pengutronix.de> Cc: Paul Walmsley <paul.walmsley(a)sifive.com> Cc: Palmer Dabbelt <palmer(a)dabbelt.com> Cc: Albert Ou <aou(a)eecs.berkeley.edu> Cc: Alessandro Zummo <a.zummo(a)towertech.it> Cc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Zhang Rui <rui.zhang(a)intel.com> Cc: Daniel Lezcano <daniel.lezcano(a)linaro.org> Cc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 1 - .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 1 - Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 -- .../devicetree/bindings/clock/sprd,sc9863a-clk.yaml | 1 - .../devicetree/bindings/crypto/allwinner,sun8i-ce.yaml | 2 -- Documentation/devicetree/bindings/crypto/fsl-dcp.yaml | 1 - .../display/allwinner,sun4i-a10-display-backend.yaml | 6 ------ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 1 - .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 4 ---- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 2 -- .../bindings/display/allwinner,sun8i-r40-tcon-top.yaml | 2 -- .../devicetree/bindings/display/bridge/cdns,mhdp8546.yaml | 2 -- .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 2 -- Documentation/devicetree/bindings/display/st,stm32-dsi.yaml | 2 -- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 1 - .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 4 ---- .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - .../devicetree/bindings/edac/amazon,al-mc-edac.yaml | 2 -- Documentation/devicetree/bindings/eeprom/at24.yaml | 1 - Documentation/devicetree/bindings/example-schema.yaml | 2 -- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 - Documentation/devicetree/bindings/gpu/vivante,gc.yaml | 1 - Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 1 - .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 2 -- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml | 1 - .../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 - .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 -- .../bindings/interrupt-controller/fsl,irqsteer.yaml | 1 - .../bindings/interrupt-controller/loongson,liointc.yaml | 1 - Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 1 - .../devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 - .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 -- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 1 - Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 1 - .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 1 - .../devicetree/bindings/media/qcom,sc7180-venus.yaml | 1 - .../devicetree/bindings/media/qcom,sdm845-venus-v2.yaml | 1 - .../devicetree/bindings/media/qcom,sm8250-venus.yaml | 1 - Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 - .../bindings/memory-controllers/mediatek,smi-common.yaml | 6 ++---- .../bindings/memory-controllers/mediatek,smi-larb.yaml | 1 - .../devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 -- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 - Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 2 -- Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 2 -- Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 1 - Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml | 1 - .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 -- .../devicetree/bindings/net/brcm,bcm4908-enet.yaml | 2 -- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 -- Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml | 2 -- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 -- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 1 - Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 -- Documentation/devicetree/bindings/pci/loongson.yaml | 1 - .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 1 - .../devicetree/bindings/pci/microchip,pcie-host.yaml | 2 -- Documentation/devicetree/bindings/perf/arm,cmn.yaml | 1 - .../devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 1 - .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 3 --- Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 - .../devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml | 1 - .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 1 - .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 - .../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 -- .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 1 - .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 1 - Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 1 - Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml | 1 - Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 2 -- Documentation/devicetree/bindings/serial/samsung_uart.yaml | 1 - .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 1 - Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 2 -- .../bindings/sound/nvidia,tegra-audio-graph-card.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 2 -- Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 --- .../devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - .../devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 2 -- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 -- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 - .../bindings/timer/allwinner,sun5i-a13-hstimer.yaml | 1 - Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 1 - .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 -- .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 1 - .../devicetree/bindings/usb/maxim,max3420-udc.yaml | 2 -- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 4 ---- Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- .../devicetree/bindings/watchdog/st,stm32-iwdg.yaml | 1 - 101 files changed, 2 insertions(+), 163 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml index a75e9a8f539a..3c7a2425f3e6 100644 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml @@ -20,7 +20,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: AHCI registers - description: SATA configuration and IPFS registers diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index a27025cd3909..c4b7243ddcf2 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -51,7 +51,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: High Frequency Oscillator (usually at 24MHz) - description: Low Frequency Oscillator (usually at 32kHz) @@ -60,7 +59,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: hosc - const: losc diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index eacccc88bbf6..8e2eac6cbfb9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -46,7 +46,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - const: calib_backup diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml index 1121b3934cb9..b0d1c65aa354 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -27,7 +27,6 @@ properties: - description: Sleep clock source - description: PLL test clock source (Optional clock) minItems: 2 - maxItems: 3 clock-names: items: @@ -35,7 +34,6 @@ properties: - const: sleep_clk - const: core_bi_pll_test_se # Optional clock minItems: 2 - maxItems: 3 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml index 78f35832aa41..1122700dcc2b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml @@ -36,7 +36,6 @@ properties: - description: USB3 phy wrapper pipe clock source (Optional clock) - description: USB3 phy sec pipe clock source (Optional clock) minItems: 2 - maxItems: 13 clock-names: items: @@ -54,7 +53,6 @@ properties: - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock minItems: 2 - maxItems: 13 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 4069e09cb62d..47e1ab08c95d 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -40,7 +40,6 @@ properties: clock-names: minItems: 1 - maxItems: 4 items: - const: ext-26m - const: ext-32k diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 6ab07eba7778..00648f9d9278 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -30,7 +30,6 @@ properties: - description: Module clock - description: MBus clock minItems: 2 - maxItems: 3 clock-names: items: @@ -38,7 +37,6 @@ properties: - const: mod - const: ram minItems: 2 - maxItems: 3 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml index a30bf38a4a49..99be01539fcd 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -27,7 +27,6 @@ properties: - description: MXS DCP DCP interrupt - description: MXS DCP secure interrupt minItems: 2 - maxItems: 3 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml index 12a7df0e38b2..3d8ea3c2d8dd 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -26,14 +26,12 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Display Backend registers - description: SAT registers reg-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat @@ -43,7 +41,6 @@ properties: clocks: minItems: 3 - maxItems: 4 items: - description: The backend interface clock - description: The backend module clock @@ -52,7 +49,6 @@ properties: clock-names: minItems: 3 - maxItems: 4 items: - const: ahb - const: mod @@ -61,14 +57,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: The Backend reset line - description: The SAT reset line reset-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index a738d7c12a97..bf0bdf54e5f9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -24,7 +24,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 907fb47cc84a..5d42d36608d9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 6 items: - description: Bus Clock - description: Register Clock @@ -57,7 +56,6 @@ properties: clock-names: minItems: 3 - maxItems: 6 items: - const: iahb - const: isfr @@ -68,14 +66,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: HDMI Controller Reset - description: HDCP Reset reset-names: minItems: 1 - maxItems: 2 items: - const: ctrl - const: hdcp diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml index 501cec16168c..a97366aaf924 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -27,7 +27,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock @@ -36,7 +35,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: bus - const: mod diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml index ec21e8bf2767..61ef7b337218 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -48,7 +48,6 @@ properties: clocks: minItems: 2 - maxItems: 6 items: - description: The TCON TOP interface clock - description: The TCON TOP TV0 clock @@ -59,7 +58,6 @@ properties: clock-names: minItems: 2 - maxItems: 6 items: - const: bus - const: tcon-tv0 diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml index 63427878715e..9a3208a15137 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -18,7 +18,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). @@ -29,7 +28,6 @@ properties: reg-names: minItems: 1 - maxItems: 2 items: - const: mhdptx - const: j721e-intg diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index 75cd9c686e98..da3b889ad8fc 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -29,7 +29,6 @@ properties: clocks: minItems: 2 - maxItems: 5 items: - {} - {} @@ -41,7 +40,6 @@ properties: clock-names: minItems: 2 - maxItems: 5 items: - {} - {} diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 679daed4124e..ed310bbe3afe 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -29,7 +29,6 @@ properties: - description: DSI bus clock - description: Pixel clock minItems: 2 - maxItems: 3 clock-names: items: @@ -37,7 +36,6 @@ properties: - const: ref - const: px_clk minItems: 2 - maxItems: 3 resets: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index d54f9ca207af..4ae3d75492d3 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -22,7 +22,6 @@ properties: - description: events interrupt line. - description: errors interrupt line. minItems: 1 - maxItems: 2 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 403d57977ee7..d88bd93f4b80 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -65,7 +65,6 @@ properties: The APB clock and at least one video clock are mandatory, the audio clock is optional. minItems: 2 - maxItems: 4 items: - description: dp_apb_clk is the APB clock - description: dp_aud_clk is the Audio clock @@ -78,13 +77,11 @@ properties: clock-names: oneOf: - minItems: 2 - maxItems: 3 items: - const: dp_apb_clk - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - minItems: 3 - maxItems: 4 items: - const: dp_apb_clk - const: dp_aud_clk @@ -116,7 +113,6 @@ properties: maxItems: 2 phy-names: minItems: 1 - maxItems: 2 items: - const: dp-phy0 - const: dp-phy1 diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index 7f2a54bc732d..d8142cbd13d3 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -52,7 +52,6 @@ properties: interrupt-names: minItems: 9 - maxItems: 17 items: - const: error - pattern: "^ch([0-9]|1[0-5])$" diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml index 57e5270a0741..4cfc3a187004 100644 --- a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml +++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml @@ -30,14 +30,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: uncorrectable error interrupt - description: correctable error interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: ue - const: ce diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 021d8ae42da3..914a423ec449 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -32,7 +32,6 @@ properties: oneOf: - allOf: - minItems: 1 - maxItems: 2 items: - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$" diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index a97f39109f8d..ff6ec65145cf 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -91,7 +91,6 @@ properties: interrupts: # Either 1 or 2 interrupts can be present minItems: 1 - maxItems: 2 items: - description: tx or combined interrupt - description: rx interrupt @@ -105,7 +104,6 @@ properties: interrupt-names: # minItems must be specified here because the default would be 2 minItems: 1 - maxItems: 2 items: - const: tx irq - const: rx irq diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml index 9d72264fa90a..e6485f7b046f 100644 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -34,7 +34,6 @@ properties: - enum: [ bridge, gca ] - enum: [ bridge, gca ] minItems: 2 - maxItems: 4 interrupts: items: diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index 3ed172629974..93e7244cdc0e 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -36,7 +36,6 @@ properties: - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) minItems: 1 - maxItems: 4 clock-names: items: diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml index edbca2476128..7070c04469ed 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -21,7 +21,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: BSC register range - description: Auto-I2C register range diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index eb72dd571def..f771c09aabfc 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -43,14 +43,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock for the I2C bus - description: Bus clock (Only for Armada 7K/8K) clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: reg diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml index d2b401d062b9..93198d5d43a6 100644 --- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml +++ b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml @@ -20,7 +20,6 @@ properties: reg: minItems: 3 - maxItems: 4 items: - description: Smbus block registers - description: Cause master registers diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml index 3be8955587e4..7e8328e9ce13 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -41,7 +41,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: clkin - const: core diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1e7894e524f9..733351dee252 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -38,14 +38,12 @@ properties: dfsdm clock can also feed CLKOUT, when CLKOUT is used. - description: audio clock can be used as an alternate to feed CLKOUT. minItems: 1 - maxItems: 2 clock-names: items: - const: dfsdm - const: audio minItems: 1 - maxItems: 2 "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index 3b11a1a15398..bcb5e20fa9ca 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -35,7 +35,6 @@ properties: - description: output interrupt 6 - description: output interrupt 7 minItems: 1 - maxItems: 8 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 067165c4b836..edf26452dc72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -50,7 +50,6 @@ properties: - const: int2 - const: int3 minItems: 1 - maxItems: 4 '#interrupt-cells': const: 2 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml index 5951c6f98c74..e87bfbcc6913 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml @@ -38,7 +38,6 @@ properties: If provided, then the combined interrupt will be used in preference to any others. - minItems: 2 - maxItems: 4 items: - const: eventq # Event Queue not empty - const: gerror # Global Error activated diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml index dda44976acc1..02c69a95c332 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml @@ -49,7 +49,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 description: Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. items: diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index 3b7ab61a144f..b15da9ba90b2 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -32,7 +32,6 @@ properties: - description: tx channel free - description: wakeup source minItems: 2 - maxItems: 3 interrupt-names: items: @@ -40,7 +39,6 @@ properties: - const: tx - const: wakeup minItems: 2 - maxItems: 3 wakeup-source: true diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index b902495d278b..5044c4bb94e0 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -67,7 +67,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dos_parser - const: dos diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml index df634b0c1f8c..de15cebe2955 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -30,7 +30,6 @@ properties: reg-names: minItems: 1 - maxItems: 13 items: - const: main - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index c14c7d827b00..b39b84c5f012 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -43,7 +43,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: AXI bus interface clock - description: Peripheral clock diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 04013e5dd044..90b4af2c9724 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 04b9af4db191..177bf81544b1 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 3 - maxItems: 4 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index 7b81bd7f2399..ebf8f3d866a5 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0 diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index 9cd56ff2c316..817a6d566738 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -78,7 +78,6 @@ properties: dma-names: minItems: 1 - maxItems: 2 items: - const: rx - const: rx diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml index a08a32340987..e87e4382807c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -53,14 +53,12 @@ properties: apb and smi are mandatory. the async is only for generation 1 smi HW. gals(global async local sync) also is optional, see below. minItems: 2 - maxItems: 4 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. - description: smi is the clock for transfer data and command. - - description: async is asynchronous clock, it help transform the smi - clock into the emi clock domain. - - description: gals0 is the path0 clock of gals. + - description: Either asynchronous clock to help transform the smi clock + into the emi clock domain on Gen1 h/w, or the path0 clock of gals. - description: gals1 is the path1 clock of gals. clock-names: diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index 7ed7839ff0a7..2353f6cf3c80 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -37,7 +37,6 @@ properties: description: | apb and smi are mandatory. gals(global async local sync) is optional. minItems: 2 - maxItems: 3 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index e75b3a8ba816..4f62ad6ce50c 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -64,7 +64,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock @@ -73,7 +72,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: ahb - const: mmc diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 369471814496..b5baf439fbac 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -116,7 +116,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 4 items: - const: default - const: state_100mhz diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 8648d48dbbfd..4e553fd0349f 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -38,7 +38,6 @@ properties: description: Should contain phandle for the clock feeding the MMC controller. minItems: 2 - maxItems: 8 items: - description: source clock (required). - description: HCLK which used for host (required). @@ -51,7 +50,6 @@ properties: clock-names: minItems: 2 - maxItems: 8 items: - const: source - const: hclk diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 1118b6fa93c9..677989bc5924 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -75,7 +75,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: cd @@ -107,7 +106,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 2 items: - const: default - const: state_uhs diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 3a79e39253d2..94a96174f99a 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -45,7 +45,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: clk_ahb - const: clk_xin diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index aa12480648a5..1c87f4218e18 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -57,7 +57,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: io - const: core diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 0467441d7037..608e1d62bed5 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -43,7 +43,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 4 items: - description: GMAC main clock - description: First parent clock of the internal mux @@ -52,7 +51,6 @@ allOf: clock-names: minItems: 3 - maxItems: 4 items: - const: stmmaceth - const: clkin0 diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml index 2f46e45dcd60..a93d2f165899 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -23,14 +23,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RX interrupt - description: TX interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: rx - const: tx diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 798fa5fb7bb2..f84e31348d80 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -30,14 +30,12 @@ properties: - description: interrupt line0 - description: interrupt line1 minItems: 1 - maxItems: 2 interrupt-names: items: - const: int0 - const: int1 minItems: 1 - maxItems: 2 clocks: items: diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index d730fe5a4355..d159ac78cec1 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -48,14 +48,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: switch's main clock - description: dividing of the switch core clock clock-names: minItems: 1 - maxItems: 2 items: - const: sw_switch - const: sw_switch_mdiv diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 2edd8bea993e..5d4b028e5620 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -82,7 +82,6 @@ properties: interrupts: minItems: 1 - maxItems: 3 items: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection @@ -90,7 +89,6 @@ properties: interrupt-names: minItems: 1 - maxItems: 3 items: - const: macirq - const: eth_wake_irq diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 27eb6066793f..19c7bd482a51 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: GMAC main clock - description: MAC TX clock diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index f90557f6deb8..b9589a0daa5c 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -25,14 +25,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 81bae060cbde..82bc6c486ca3 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -24,7 +24,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: CFG0 standard config space register - description: CFG1 extended config space register diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index e7b1f9892da4..742206dbd965 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -70,7 +70,6 @@ properties: reset-names: minItems: 1 - maxItems: 2 items: - const: phy - const: mac diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 04251d71f56b..fb95c276a986 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -26,14 +26,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml index e4fcc0de25e2..42424ccbdd0c 100644 --- a/Documentation/devicetree/bindings/perf/arm,cmn.yaml +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -21,7 +21,6 @@ properties: interrupts: minItems: 1 - maxItems: 4 items: - description: Overflow interrupt for DTC0 - description: Overflow interrupt for DTC1 diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml index 9a2e779e6d38..0f0bcde9eb88 100644 --- a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml @@ -28,7 +28,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: usbh - const: usb_ref diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml index 5f9e91bfb5ff..43a4b880534c 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -22,7 +22,6 @@ properties: reg: minItems: 1 - maxItems: 6 items: - description: the base CTRL register - description: XHCI EC register @@ -33,7 +32,6 @@ properties: reg-names: minItems: 1 - maxItems: 6 items: - const: ctrl - const: xhci_ec @@ -51,7 +49,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: sw_usb - const: sw_usb3 diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index 04edda504ab6..cb1aa325336f 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -35,7 +35,6 @@ properties: reg-names: minItems: 1 - maxItems: 2 items: - const: phy - const: phy-ctrl diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index b8a7651a3d9a..ef9d9d4e6875 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -131,7 +131,6 @@ patternProperties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) - description: Reference clock of analog phy @@ -141,7 +140,6 @@ patternProperties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: da_ref diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml index 84383e2e0b34..e71b32c9c0d1 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml @@ -31,14 +31,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: Sierra PHY reset. - description: Sierra APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: sierra_reset - const: sierra_apb diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 320a232c7208..bd9ae11c9994 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -52,28 +52,24 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Offset of the Torrent PHY configuration registers. - description: Offset of the DPTX PHY configuration registers. reg-names: minItems: 1 - maxItems: 2 items: - const: torrent_phy - const: dptx_phy resets: minItems: 1 - maxItems: 2 items: - description: Torrent PHY reset. - description: Torrent APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: torrent_reset - const: torrent_apb diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml index 17f132ce5516..35296c588e78 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml index 17fd7f6b83bb..6cf5c6c06072 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 7808ec8bc712..a2de5202eb5e 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -49,7 +49,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Address and length of PHY's common serdes block. - description: Address and length of PHY's DP_COM control block. diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 9f9cf07b7d45..930da598c969 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -36,7 +36,6 @@ properties: clocks: minItems: 2 - maxItems: 3 items: - description: phy config clock - description: 19.2 MHz ref clk @@ -44,7 +43,6 @@ properties: clock-names: minItems: 2 - maxItems: 3 items: - const: cfg_ahb - const: ref diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 0f358d5b84ef..d5dc5a3cdceb 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -39,7 +39,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: fck - const: usb_x1 @@ -61,7 +60,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: reset of USB 2.0 host side - description: reset of USB 2.0 peripheral side diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml index f3ef738a3ff6..b8483f9edbfc 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -33,7 +33,6 @@ properties: # If you want to use the ssc, the clock-frequency of usb_extal # must not be 0. minItems: 2 - maxItems: 3 items: - const: usb3-if # The funcional clock - const: usb3s_clk # The usb3's external clock diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index ccdd9e3820d7..3f94f6944740 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -26,7 +26,6 @@ properties: - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control - description: PAD Drive Capacity Select minItems: 1 - maxItems: 4 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index d30f85cc395e..f005abac7079 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -37,7 +37,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: vpu - const: vapb diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 7dcab2bf8128..54a7700df08f 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -37,7 +37,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Module Clock - description: Bus Clock diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 64afdcfb613d..1e6225677e00 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -72,7 +72,6 @@ properties: - from local to remote, where ACK from the remote means that communnication as been stopped on the remote side. minItems: 1 - maxItems: 4 mbox-names: items: @@ -81,7 +80,6 @@ properties: - const: shutdown - const: detach minItems: 1 - maxItems: 4 memory-region: description: diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 6070456a7b67..f399743b631b 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -57,7 +57,6 @@ properties: memory-region: minItems: 2 - maxItems: 8 description: | phandle to the reserved memory nodes to be associated with the remoteproc device. There should be at least two reserved memory nodes defined. The diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 73400bc6e91d..75161f191ac3 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -116,7 +116,6 @@ properties: list, in the specified order, each representing the corresponding internal RAM memory region. minItems: 1 - maxItems: 3 items: - const: l2ram - const: l1pram diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml index 27c5e34a3ac6..b11ac533f914 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -59,7 +59,6 @@ properties: - description: SRC interrupt - description: CPU WDOG interrupts out of SRC minItems: 1 - maxItems: 2 '#reset-cells': const: 1 diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 23b227614366..1d38ff76d18f 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -56,7 +56,6 @@ properties: interrupts: minItems: 3 - maxItems: 4 items: - description: DirError interrupt - description: DataError interrupt diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index b1b0ee769b71..beeb90e55727 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -32,7 +32,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RTC Alarm 0 - description: RTC Alarm 1 diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml index 06bd737821c1..4807c95a663c 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml @@ -21,7 +21,6 @@ properties: - description: rtc alarm interrupt - description: dryice security violation interrupt minItems: 1 - maxItems: 2 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index bd21060d26e0..a90c971b4f1f 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -36,14 +36,12 @@ properties: - description: ipg clock - description: baud clock minItems: 1 - maxItems: 2 clock-names: items: - const: ipg - const: baud minItems: 1 - maxItems: 2 dmas: items: diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 97ec8a093bf3..3ec3822bd114 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -44,7 +44,6 @@ properties: clock-names: description: N = 0 is allowed for SoCs without internal baud clock mux. minItems: 2 - maxItems: 5 items: - const: uart - pattern: '^clk_uart_baud[0-3]$' diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 84671950ca0d..4663c2bcad50 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -164,7 +164,6 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: UART core irq - description: Wakeup irq (RX GPIO) diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index dbc62821c60b..9790617af1bc 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -100,7 +100,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1. @@ -111,7 +110,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml index 249970952202..5bdd30a8a404 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml @@ -28,7 +28,6 @@ properties: minItems: 2 clock-names: - minItems: 2 items: - const: pll_a - const: plla_out0 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 38e52e7dbb40..63370709c768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -34,7 +34,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: I2S bit clock - description: @@ -48,7 +47,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: i2s - const: sync_input diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index f2443b651282..06e83461705c 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -26,7 +26,6 @@ properties: - description: Base address and size of SAI common register set. - description: Base address and size of SAI identification register set. minItems: 1 - maxItems: 2 ranges: maxItems: 1 @@ -81,14 +80,12 @@ patternProperties: - description: sai_ck clock feeding the internal clock generator. - description: MCLK clock from a SAI set as master clock provider. minItems: 1 - maxItems: 2 clock-names: items: - const: sai_ck - const: MCLK minItems: 1 - maxItems: 2 dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index e3fb553d9180..4d46c49ec32b 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -35,7 +35,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: controller register bus clock - description: baud rate generator and delay control clock diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 6ee19d49fd3c..ec5873919170 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -56,7 +56,6 @@ properties: reg-names: minItems: 1 - maxItems: 5 items: - const: mspi - const: bspi @@ -71,7 +70,6 @@ properties: interrupt-names: oneOf: - minItems: 1 - maxItems: 7 items: - const: mspi_done - const: mspi_halted diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index bf97d1fb33e7..6e0b110153b0 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -23,14 +23,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock clock-names: minItems: 1 - maxItems: 2 items: - const: bus - const: mod diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 0242fd91b622..0b3b6af7bd5b 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -77,7 +77,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - enum: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml index b6a6d03a08b2..2ecac754e1cd 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml @@ -24,7 +24,6 @@ properties: interrupts: minItems: 2 - maxItems: 4 items: - description: Timer 0 Interrupt - description: Timer 1 Interrupt diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index 7f5e3af58255..df8ce87fd54b 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -35,7 +35,6 @@ properties: interrupts: minItems: 1 - maxItems: 5 items: - description: secure timer irq - description: non-secure timer irq diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index d83a1f97f911..cd2176cad53a 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -71,14 +71,12 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: physical timer irq - description: virtual timer irq reg: minItems: 1 - maxItems: 2 items: - description: 1st view base address - description: 2nd optional view base address diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index a8de99b0c0f9..f32575d4b5aa 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -22,7 +22,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: Timer 1 interrupt - description: Timer 2 interrupt diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 4241d38d5864..1d893d3d3432 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -30,14 +30,12 @@ properties: - description: usb irq from max3420 - description: vbus detection irq minItems: 1 - maxItems: 2 interrupt-names: items: - const: udc - const: vbus minItems: 1 - maxItems: 2 spi-max-frequency: maximum: 26000000 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index e60e590dbe12..8428415896ce 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -25,7 +25,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: XUSB device controller registers - description: XUSB device PCI Config registers @@ -33,7 +32,6 @@ properties: reg-names: minItems: 2 - maxItems: 3 items: - const: base - const: fpci @@ -45,7 +43,6 @@ properties: clocks: minItems: 4 - maxItems: 5 items: - description: Clock to enable core XUSB dev clock. - description: Clock to enable XUSB super speed clock. @@ -55,7 +52,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dev - const: ss diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index e67223d90bb7..ad73339ffe1d 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -53,7 +53,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: USB 2.0 host - description: USB 2.0 peripheral @@ -86,7 +85,6 @@ properties: dma-names: minItems: 2 - maxItems: 4 items: - const: ch0 - const: ch1 @@ -100,7 +98,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: USB 2.0 host - description: USB 2.0 peripheral diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml index 3f1ba1d6c6b5..481bf91f988a 100644 --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml @@ -27,7 +27,6 @@ properties: - description: Low speed clock - description: Optional peripheral clock minItems: 1 - maxItems: 2 clock-names: items: -- 2.27.0

13 14

[PATCH] ALSA: usb-audio: Fix OOB access at proc output
by Takashi Iwai 22 Jun '21

22 Jun '21

At extending the available mixer values for 32bit types, we forgot to add the corresponding entries for the format dump in the proc output. This may result in OOB access. Here adds the missing entries. Fixes: bc18e31c3042 ("ALSA: usb-audio: Fix parameter block size for UAC2 control requests") Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/mixer.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 428d581f988f..4ea4875abdf8 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -3294,8 +3294,9 @@ static void snd_usb_mixer_dump_cval(struct snd_info_buffer *buffer, struct usb_mixer_elem_list *list) { struct usb_mixer_elem_info *cval = mixer_elem_list_to_info(list); - static const char * const val_types[] = {"BOOLEAN", "INV_BOOLEAN", - "S8", "U8", "S16", "U16"}; + static const char * const val_types[] = { + "BOOLEAN", "INV_BOOLEAN", "S8", "U8", "S16", "U16", "S32", "U32", + }; snd_iprintf(buffer, " Info: id=%i, control=%i, cmask=0x%x, " "channels=%i, type=\"%s\"\n", cval->head.id, cval->control, cval->cmask, cval->channels, -- 2.26.2

1 0

[PATCH 00/31] Refactor Scarlett Gen 2 support and add Scarlett Gen 3 support
by Geoffrey D. Bennett 22 Jun '21

22 Jun '21

This patch set broadly: - Refactors the Scarlett Gen 2 support to make the Gen 3 mixer support trivial to add - Fixes a couple of minor issues with the Gen 2 support (low priority for stable; the issues were not reported by any user) - Adds support for Gen 3 devices with and without a mixer - Adds support for the major features new with the Gen 3 devices Geoffrey D. Bennett (31): ALSA: usb-audio: scarlett2: Add usb_tx/rx functions ALSA: usb-audio: scarlett2: Update initialisation sequence ALSA: usb-audio: scarlett2: Fix 6i6 Gen 2 line out descriptions ALSA: usb-audio: scarlett2: Always enable interrupt polling ALSA: usb-audio: scarlett2: Add "Sync Status" control ALSA: usb-audio: scarlett2: Merge common line in capture strings ALSA: usb-audio: scarlett2: Reformat scarlett2_config_items[] ALSA: usb-audio: scarlett2: Improve device info lookup ALSA: usb-audio: scarlett2: Move info lookup out of init function ALSA: usb-audio: scarlett2: Remove repeated device info comments ALSA: usb-audio: scarlett2: Add scarlett2_vol_ctl_write() helper ALSA: usb-audio: scarlett2: Add mute support ALSA: usb-audio: scarlett2: Allow arbitrary ordering of mux entries ALSA: usb-audio: scarlett2: Split struct scarlett2_ports ALSA: usb-audio: scarlett2: Fix Level Meter control ALSA: usb-audio: scarlett2: Add Gen 3 mixer support ALSA: usb-audio: scarlett2: Add support for "input-other" notify ALSA: usb-audio: scarlett2: Add Gen 3 MSD mode switch ALSA: usb-audio: scarlett2: Move get config above set config ALSA: usb-audio: scarlett2: Allow bit-level access to config ALSA: usb-audio: scarlett2: Add support for Solo and 2i2 Gen 3 ALSA: usb-audio: scarlett2: Add "air" switch support ALSA: usb-audio: scarlett2: Add phantom power switch support ALSA: usb-audio: scarlett2: Add direct monitor support ALSA: usb-audio: scarlett2: Label 18i8 Gen 3 line outputs correctly ALSA: usb-audio: scarlett2: Split up sw_hw_enum_ctl_put() ALSA: usb-audio: scarlett2: Add sw_hw_ctls and mux_ctls ALSA: usb-audio: scarlett2: Update mux controls to allow updates ALSA: usb-audio: scarlett2: Add speaker switching support ALSA: usb-audio: scarlett2: Update get_config to do endian conversion ALSA: usb-audio: scarlett2: Add support for the talkback feature sound/usb/mixer.c | 2 +- sound/usb/mixer_quirks.c | 6 + sound/usb/mixer_scarlett_gen2.c | 2725 +++++++++++++++++++++++++------ 3 files changed, 2239 insertions(+), 494 deletions(-) base-commit: 6c0a2078134aba6a77291554035304df9e16b85c -- 2.31.1

3 42

[RESEND PATCH v2] ASoC: fsl-asoc-card: change dev_err to dev_err_probe for defer probe
by Shengjiu Wang 22 Jun '21

22 Jun '21

Don't need to print error message for defer probe Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- changes in v2: - use dev_err_probe instead of dev_dbg sound/soc/fsl/fsl-asoc-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 121e08c2af2a..24c890d76da0 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -708,8 +708,8 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) of_node_put(framemaster); if (!fsl_asoc_card_is_ac97(priv) && !codec_dev) { - dev_err(&pdev->dev, "failed to find codec device\n"); ret = -EPROBE_DEFER; + dev_err_probe(&pdev->dev, ret, "failed to find codec device\n"); goto asrc_fail; } -- 2.27.0

3 3

[PATCH -next 0/4] ASoC: samsung: Use devm_platform_get_and_ioremap_resource()
by Yang Yingliang 21 Jun '21

21 Jun '21

Use devm_platform_get_and_ioremap_resource() to simplify code. Yang Yingliang (4): ASoC: samsung: i2s: Use devm_platform_get_and_ioremap_resource() ASoC: samsung: pcm: Use devm_platform_get_and_ioremap_resource() ASoC: samsung: s3c2412-i2s: Use devm_platform_get_and_ioremap_resource() ASoC: samsung: s3c24xx-i2s: Use devm_platform_get_and_ioremap_resource() sound/soc/samsung/i2s.c | 3 +-- sound/soc/samsung/pcm.c | 3 +-- sound/soc/samsung/s3c2412-i2s.c | 3 +-- sound/soc/samsung/s3c24xx-i2s.c | 3 +-- 4 files changed, 4 insertions(+), 8 deletions(-) -- 2.25.1

3 9

[PATCH v2] ASoC: fsl_xcvr: disable all interrupts when suspend happens
by Shengjiu Wang 21 Jun '21

21 Jun '21

There is an unhandled interrupt after suspend, which cause endless interrupt when system resume, so system may hang. Disable all interrupts in runtime suspend callback to avoid above issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- changes in v2: - Add Fixes tag - Add comments for the change sound/soc/fsl/fsl_xcvr.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index df7c189d97dd..92dd99258edf 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -1233,6 +1233,16 @@ static __maybe_unused int fsl_xcvr_runtime_suspend(struct device *dev) struct fsl_xcvr *xcvr = dev_get_drvdata(dev); int ret; + /* + * Clear interrupts, when streams starts or resumes after + * suspend, interrupts are enabled in prepare(), so no need + * to enable interrupts in resume(). + */ + ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0, + FSL_XCVR_IRQ_EARC_ALL, 0); + if (ret < 0) + dev_err(dev, "Failed to clear IER0: %d\n", ret); + /* Assert M0+ reset */ ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, FSL_XCVR_EXT_CTRL_CORE_RESET, -- 2.27.0

3 2