July 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/8] ASoC: qcom: Add support for SC7180 lpass variant
by Rohit kumar 22 Jul '20

22 Jul '20

This patch chain add audio support for SC7180 soc by doing the required modification in existing common lpass-cpu/lpass-platform driver. Below is a brief summary of patch series: PATCH v3 0001 ... 0005: Update lpass-cpu, lpass-platform drivers to make it more generic and support newer soc registers configuration. This also updates existing lpass-apq8096.c and lpass-ipq806x.c. PATCH v2 0005 ... 0007: Add documentation and platform driver for newer SC7180 SOC variant. Changes since v2: - Moved yaml conversion of Documentation to the end of patch series - Used REG_FIELD_ID instead of REG_FIELD for DMACTL and I2SCTL registers. Move reg_fields to struct lpass_variant as suggested by Srinivas. Ajit Pandey (5): ASoC: qcom: Add common array to initialize soc based core clocks include: dt-bindings: sound: Add sc7180-lpass bindings header ASoC: qcom: lpass-platform: Replace card->dev with component->dev ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio dt-bindings: sound: lpass-cpu: Move to yaml format Rohit kumar (3): ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 -------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 154 +++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 10 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 86 ++++++-- sound/soc/qcom/lpass-cpu.c | 193 +++++++++--------- sound/soc/qcom/lpass-ipq806x.c | 67 +++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 ++++++++------- sound/soc/qcom/lpass-platform.c | 156 +++++++++++---- sound/soc/qcom/lpass-sc7180.c | 216 +++++++++++++++++++++ sound/soc/qcom/lpass.h | 63 +++++- 12 files changed, 886 insertions(+), 302 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml create mode 100644 include/dt-bindings/sound/sc7180-lpass.h create mode 100644 sound/soc/qcom/lpass-sc7180.c -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

4 28

Fwd: Fwd: [PATCH] Add implicit feedback quirk for SSL2. (from laurie@tratt.net)
by Dmitry Pavlushko 22 Jul '20

22 Jul '20

Hi devs, Sorry for the interruption. Any chance you can push the line for SSL2 usb id? Thanks, Dmitry -------- Forwarded Message -------- Subject: Fwd: [PATCH] Add implicit feedback quirk for SSL2. (from laurie(a)tratt.net) Date: Mon, 15 Jun 2020 10:36:39 +0100 From: Laurence Tratt <laurie(a)tratt.net> To: dpavlushko(a)gmail.com I forgot to CC you. Sorry! Laurie ----- Forwarded message from Laurence Tratt <laurie(a)tratt.net> ----- From: Laurence Tratt <laurie(a)tratt.net> To: alsa-devel(a)alsa-project.org Date: Mon, 15 Jun 2020 08:30:23 +0100 Subject: [PATCH] Add implicit feedback quirk for SSL2. As expected, this requires the same quirk as the SSL2+ in order for the clock to sync. This was suggested by, and tested on an SSL2, by Dmitry. Signed-off-by: Dmitry <dpavlushko(a)gmail.com> Signed-off-by: Laurence Tratt <laurie(a)tratt.net> --- sound/usb/pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git sound/usb/pcm.c sound/usb/pcm.c index 84c0ae4319..dc1608bdf6 100644 --- sound/usb/pcm.c +++ sound/usb/pcm.c @@ -367,6 +367,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ifnum = 0; goto add_sync_ep_from_ifnum; case USB_ID(0x07fd, 0x0008): /* MOTU M Series */ + case USB_ID(0x31e9, 0x0001): /* Solid State Logic SSL2 */ case USB_ID(0x31e9, 0x0002): /* Solid State Logic SSL2+ */ ep = 0x81; ifnum = 2; -- 2.27.0 ----- End forwarded message -----

2 1

Re: 14216-add-prevent-wakeup-from-s3-by-lenovo-Thinkcentre-TI
by gregkh 22 Jul '20

22 Jul '20

> 此电子邮件消息仅供预期收件人使用，其中可能包含保密或特权使用信息。如果您不是预 > 期收件人，请勿使用、传播、分发或复制此电子邮件或信赖此邮件采取任何行动。如果您 > 误收了此邮件，请立即回复邮件通知统信软件技术有限公司发件人，并删除误收电子邮件 > 及其相关附件。感谢配合！ > > This email message is intended only for the use of the individual or entity who > /which is the intended recipient and may contain information that is privileged > or confidential. If you are not the intended recipient, you are hereby notified > that any use, dissemination, distribution or copying of, or taking any action > in reliance on, this e-mail is strictly prohibited. If you have received this > email in error, please notify UnionTech Software Technology immediately by > replying to this e-mail and immediately delete and discard all copies of the > e-mail and the attachment thereto (if any). Thank you. This is not compatible with kernel development, sorry, now deleted. greg k-h

1 0

[PATCH] ASoC: max98357a: move control of SD_MODE back to DAI ops
by Tzung-Bi Shih 22 Jul '20

22 Jul '20

Partially reverts commit 128f825aeab7 ("ASoC: max98357a: move control of SD_MODE to DAPM"). In order to have mute control of max98357 from machine drivers, commit 128f825aeab7 ("ASoC: max98357a: move control of SD_MODE to DAPM") moves the control of SD_MODE from DAI ops to DAPM events. However, pop noise has been observed on rk3399-gru-kevin boards due to this commit. The commit 128f825aeab7 caused sequence of DAI clocks and SD_MODE changed on rk3399-gru-kevin boards. With the commit 128f825aeab7: - SD_MODE will be set to 1 before DAI clocks start. - SD_MODE will be set to 0 after DAI clocks stop. As a result, pop noise. Moves the control of SD_MODE back to DAI ops. In the meantime, uses an additional flag in DAPM event to provide chance of mute control for machine drivers. Signed-off-by: Tzung-Bi Shih <tzungbi(a)google.com> --- This patch addresses the reported issue in the thread https://lkml.org/lkml/2020/7/16/427 sound/soc/codecs/max98357a.c | 50 ++++++++++++++++++++++++++++-------- 1 file changed, 40 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c index 4f431133d0bb..918812763884 100644 --- a/sound/soc/codecs/max98357a.c +++ b/sound/soc/codecs/max98357a.c @@ -23,36 +23,61 @@ struct max98357a_priv { struct gpio_desc *sdmode; unsigned int sdmode_delay; + int sdmode_switch; }; -static int max98357a_sdmode_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int max98357a_daiops_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) { - struct snd_soc_component *component = - snd_soc_dapm_to_component(w->dapm); + struct snd_soc_component *component = dai->component; struct max98357a_priv *max98357a = snd_soc_component_get_drvdata(component); if (!max98357a->sdmode) return 0; - if (event & SND_SOC_DAPM_POST_PMU) { - msleep(max98357a->sdmode_delay); - gpiod_set_value(max98357a->sdmode, 1); - dev_dbg(component->dev, "set sdmode to 1"); - } else if (event & SND_SOC_DAPM_PRE_PMD) { + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + mdelay(max98357a->sdmode_delay); + if (max98357a->sdmode_switch) { + gpiod_set_value(max98357a->sdmode, 1); + dev_dbg(component->dev, "set sdmode to 1"); + } + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: gpiod_set_value(max98357a->sdmode, 0); dev_dbg(component->dev, "set sdmode to 0"); + break; } return 0; } +static int max98357a_sdmode_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98357a_priv *max98357a = + snd_soc_component_get_drvdata(component); + + if (event & SND_SOC_DAPM_POST_PMU) + max98357a->sdmode_switch = 1; + else if (event & SND_SOC_DAPM_POST_PMD) + max98357a->sdmode_switch = 0; + + return 0; +} + static const struct snd_soc_dapm_widget max98357a_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("Speaker"), SND_SOC_DAPM_OUT_DRV_E("SD_MODE", SND_SOC_NOPM, 0, 0, NULL, 0, max98357a_sdmode_event, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route max98357a_dapm_routes[] = { @@ -71,6 +96,10 @@ static const struct snd_soc_component_driver max98357a_component_driver = { .non_legacy_dai_naming = 1, }; +static const struct snd_soc_dai_ops max98357a_dai_ops = { + .trigger = max98357a_daiops_trigger, +}; + static struct snd_soc_dai_driver max98357a_dai_driver = { .name = "HiFi", .playback = { @@ -90,6 +119,7 @@ static struct snd_soc_dai_driver max98357a_dai_driver = { .channels_min = 1, .channels_max = 2, }, + .ops = &max98357a_dai_ops, }; static int max98357a_platform_probe(struct platform_device *pdev) -- 2.28.0.rc0.105.gf9edc3c819-goog

3 2

[PATCH] dt-bindings: sound: sgtl5000: Convert to json-schema
by Thierry Reding 22 Jul '20

22 Jul '20

From: Thierry Reding <treding(a)nvidia.com> Convert the Freescale SGTL5000 device tree bindings from free-form text format to json-schema. Signed-off-by: Thierry Reding <treding(a)nvidia.com> --- .../devicetree/bindings/sound/sgtl5000.txt | 60 ---------- .../devicetree/bindings/sound/sgtl5000.yaml | 103 ++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 - 3 files changed, 103 insertions(+), 62 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/sgtl5000.txt create mode 100644 Documentation/devicetree/bindings/sound/sgtl5000.yaml diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt deleted file mode 100644 index 9d9ff5184939..000000000000 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Freescale SGTL5000 Stereo Codec - -Required properties: -- compatible : "fsl,sgtl5000". - -- reg : the I2C address of the device - -- #sound-dai-cells: must be equal to 0 - -- clocks : the clock provider of SYS_MCLK - -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - -- micbias-resistor-k-ohms : the bias resistor to be used in kOhms - The resistor can take values of 2k, 4k or 8k. - If set to 0 it will be off. - If this node is not mentioned or if the value is unknown, then - micbias resistor is set to 4K. - -- micbias-voltage-m-volts : the bias voltage to be used in mVolts - The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentioned or the value is unknown, then - the value is set to 1.25V. - -- lrclk-strength: the LRCLK pad strength. Possible values are: -0, 1, 2 and 3 as per the table below: - -VDDIO 1.8V 2.5V 3.3V -0 = Disable -1 = 1.66 mA 2.87 mA 4.02 mA -2 = 3.33 mA 5.74 mA 8.03 mA -3 = 4.99 mA 8.61 mA 12.05 mA - -- sclk-strength: the SCLK pad strength. Possible values are: -0, 1, 2 and 3 as per the table below: - -VDDIO 1.8V 2.5V 3.3V -0 = Disable -1 = 1.66 mA 2.87 mA 4.02 mA -2 = 3.33 mA 5.74 mA 8.03 mA -3 = 4.99 mA 8.61 mA 12.05 mA - -Example: - -sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - clocks = <&clks 150>; - micbias-resistor-k-ohms = <2>; - micbias-voltage-m-volts = <2250>; - VDDA-supply = <&reg_3p3v>; - VDDIO-supply = <&reg_3p3v>; -}; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml new file mode 100644 index 000000000000..4f29b63c54d3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/sgtl5000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SGTL5000 Stereo Codec + +maintainers: + - Fabio Estevam <festevam(a)gmail.com> + +properties: + compatible: + const: fsl,sgtl5000 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: the clock provider of SYS_MCLK + + VDDA-supply: + description: the regulator provider of VDDA + + VDDIO-supply: + description: the regulator provider of VDDIO + + VDDD-supply: + description: the regulator provider of VDDD + + micbias-resistor-k-ohms: + description: The bias resistor to be used in kOhms. The resistor can take + values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not + mentioned or if the value is unknown, then micbias resistor is set to + 4k. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [ 0, 2, 4, 8 ] + + micbias-voltage-m-volts: + description: The bias voltage to be used in mVolts. The voltage can take + values from 1.25V to 3V by 250mV steps. If this node is not mentioned + or the value is unknown, then the value is set to 1.25V. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] + + lrclk-strength: + description: | + The LRCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the + table below: + + VDDIO 1.8V 2.5V 3.3V + 0 = Disable + 1 = 1.66 mA 2.87 mA 4.02 mA + 2 = 3.33 mA 5.74 mA 8.03 mA + 3 = 4.99 mA 8.61 mA 12.05 mA + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [ 0, 1, 2, 3 ] + + sclk-strength: + description: | + The SCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the + table below: + + VDDIO 1.8V 2.5V 3.3V + 0 = Disable + 1 = 1.66 mA 2.87 mA 4.02 mA + 2 = 3.33 mA 5.74 mA 8.03 mA + 3 = 4.99 mA 8.61 mA 12.05 mA + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [ 0, 1, 2, 3 ] + +required: + - compatible + - reg + - "#sound-dai-cells" + - clocks + - VDDA-supply + - VDDIO-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clks 150>; + micbias-resistor-k-ohms = <2>; + micbias-voltage-m-volts = <2250>; + VDDA-supply = <&reg_3p3v>; + VDDIO-supply = <&reg_3p3v>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 4165352a590a..b7e94fe8643f 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -80,8 +80,6 @@ properties: - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 - # SGTL5000: Ultra Low-Power Audio Codec - - fsl,sgtl5000 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface - gmt,g751 # Infineon IR38064 Voltage Regulator -- 2.24.1

2 1

[PATCH v3 1/2] dt-bindings: tas2770: Convert tas2770 binding to yaml
by Dan Murphy 22 Jul '20

22 Jul '20

Convert the tas2770 binding to yaml format. Add in the reset-gpio to the binding as it is in the code but not documented in the binding. Reviewed-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- .../devicetree/bindings/sound/tas2770.txt | 37 --------- .../devicetree/bindings/sound/tas2770.yaml | 76 +++++++++++++++++++ 2 files changed, 76 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt deleted file mode 100644 index ede6bb3d9637..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2770.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2770 Smart PA - -The TAS2770 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - - compatible: - Should contain "ti,tas2770". - - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. - -Optional properties: - -- interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. -- interrupts: interrupt specification for data-ready. - -Examples: - - tas2770@4c { - compatible = "ti,tas2770"; - reg = <0x4c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&msm_gpio>; - interrupts = <97 0>; - ti,asi-format = <0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml new file mode 100644 index 000000000000..8192450d72dc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019-20 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2770 Smart PA + +maintainers: + - Shi Fu <shifu0704(a)thundersoft.com> + +description: | + The TAS2770 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2770 + + reg: + maxItems: 1 + description: | + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpio: + description: GPIO used to reset the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + ti,asi-format: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sets TDM RX capture edge. + enum: + - 0 # Rising edge + - 1 # Falling edge + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpio = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + -- 2.27.0

2 4

[PATCH 1/2] dt-bindings: tas2770: Convert tas2770 binding to yaml
by Dan Murphy 22 Jul '20

22 Jul '20

Convert the tas2770 binding to yaml format. Add in the reset-gpio to the binding as it is in the code but not documented in the binding. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- .../devicetree/bindings/sound/tas2770.txt | 37 --------- .../devicetree/bindings/sound/tas2770.yaml | 76 +++++++++++++++++++ 2 files changed, 76 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt deleted file mode 100644 index ede6bb3d9637..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2770.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2770 Smart PA - -The TAS2770 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - - compatible: - Should contain "ti,tas2770". - - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. - -Optional properties: - -- interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. -- interrupts: interrupt specification for data-ready. - -Examples: - - tas2770@4c { - compatible = "ti,tas2770"; - reg = <0x4c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&msm_gpio>; - interrupts = <97 0>; - ti,asi-format = <0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <2>; - }; - diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml new file mode 100644 index 000000000000..8c667fd37a57 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019-20 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2770 Smart PA + +maintainers: + - Shi Fu <shifu0704(a)thundersoft.com> + +description: | + The TAS2770 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2770 + + reg: + maxItems: 1 + description: | + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpio: + description: GPIO used to reset the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX voltage sense time slot. + + ti,asi-format: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sets TDM RX capture edge. + enum: + - 0 # Rising edge + - 1 # Falling edge + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + reset-gpio = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + -- 2.26.2

3 3

[PATCH for-next v2 1/2] ASoC: tas2770: Fix reset gpio property name
by Dan Murphy 22 Jul '20

22 Jul '20

Fix the reset property name when allocating the GPIO descriptor. The gpiod_get_optional appends either the -gpio or -gpios suffix to the name. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tas2770.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index 54c8135fe43c..cf071121c839 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -758,8 +758,7 @@ static int tas2770_i2c_probe(struct i2c_client *client, } } - tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev, - "reset-gpio", + tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(tas2770->reset_gpio)) { if (PTR_ERR(tas2770->reset_gpio) == -EPROBE_DEFER) { -- 2.27.0

2 2

[PATCH v7] ASoC: Intel: kbl_rt5663_rt5514_max98927: Fix kabylake_ssp_fixup function
by Harsha Priya 22 Jul '20

22 Jul '20

kabylake_ssp_fixup function uses snd_soc_dpcm to identify the codecs DAIs. The hw parameters are changed based on the codec DAI, the stream is intended for. The earlier approach to get snd_soc_dpcm was using container_of() macro on snd_pcm_hw_params. The structures have been modified over time and snd_soc_dpcm does not have snd_pcm_hw_params as a reference but as a copy. This causes the current driver to crash when used. This patch changes the way snd_soc_dpcm is extracted. The snd_soc_pcm_runtime holds 2 dpcm instances (one for playback and one for capture). The 2 codecs on this SSP are dmic and speakers. One is for capture and one is for playback respectively. Based on the direction of the stream, the snd_soc_dpcm is extracted from the snd_soc_pcm_runtime structure. Tested for all use cases of the driver. Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal(a)intel.com> Tested-by: Lukasz Majczak <lma(a)semihalf.com> --- v1 -> v2: - Extract dmic from SSP0 as every BE should have own fixup function. v2 -> v3: - Restore naming in the dapm route table to not confuse with other drivers - Fixed indentations v3 -> v4: - Updated code and commit description according to solution proposed by Harsha v4 -> v5: - Cosmetic Changes v5 -> v6: - Dmic regression seen with v4 fixed - Using available routines for obtaining dpcm information v6 -> v7: - Updated comments - initilize rtd_dpcm variable - added break statement in the loop --- --- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 38 ++++++++++++++----- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 584e4f9cedc2..9f4b949cc39c 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -379,22 +379,42 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_interval *chan = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - struct snd_soc_dpcm *dpcm = container_of( - params, struct snd_soc_dpcm, hw_params); - struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; - struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; + struct snd_soc_dpcm *dpcm, *rtd_dpcm = NULL; + + /* + * The following loop will be called only for playback stream + * In this platform, there is only one playback device on every SSP + */ + for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_PLAYBACK, dpcm) { + rtd_dpcm = dpcm; + break; + } + + /* + * This following loop will be called only for capture stream + * In this platform, there is only one capture device on every SSP + */ + for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_CAPTURE, dpcm) { + rtd_dpcm = dpcm; + break; + } + + /* + * The above 2 loops are mutually exclusive based on the strem direction, + * thus rtd_dpcm variable will never be overwritten + */ /* * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ - if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || - !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || - !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { + if (!strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Port") || + !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Headset Playback") || + !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Capture Port")) { rate->min = rate->max = 48000; chan->min = chan->max = 2; snd_mask_none(fmt); snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); - } else if (!strcmp(fe_dai_link->name, "Kbl Audio DMIC cap")) { + } else if (!strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio DMIC cap")) { if (params_channels(params) == 2 || DMIC_CH(dmic_constraints) == 2) chan->min = chan->max = 2; @@ -405,7 +425,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * The speaker on the SSP0 supports S16_LE and not S24_LE. * thus changing the mask here */ - if (!strcmp(be_dai_link->name, "SSP0-Codec")) + if (!strcmp(rtd_dpcm->be->dai_link->name, "SSP0-Codec")) snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; -- 2.17.1

2 1

Speaker pops with max98357a on rk3399-gru-kevin since v5.7
by Alper Nebi Yasak 21 Jul '20

21 Jul '20

Hi, I have been getting "pop" sounds from the speaker on my rk3399-gru-kevin for a while, and bisected it to 128f825aeab7 ("ASoC: max98357a: move control of SD_MODE to DAPM"), but looks like the pops were somewhat expected: On 12 Feb 2020 13:55:15 +0800, Tzung-Bi Shih wrote [1]: > Possible drawback: may generate pop noise when BCLK=on but LRCLK=off. > As the datasheet[2] mentioned: > > Do not remove LRCLK while BCLK is present. > > Removing LRCLK while BCLK is present can cause unexpected output behavior > > including a large DC output voltage. [1] https://lore.kernel.org/alsa-devel/20200212055517.122728-1-tzungbi@google.c… As of v5.8-rc5 I'm still getting the speaker pops. More info below, but not all pops coincide with "set sdmode" messages, and vice versa. Reverting that commit stops the pops, but then the "Speakers Switch" can no longer mute the speakers. I don't really know much about these things, could anyone have a look at it? I'll try to read relevant documentation and code to make sense of it, but wanted to send an email in case there is an immediately obvious solution (besides reverting) and maybe just nobody had the time to implement it yet. Thanks in advance. --- I've experimented a bit on a Debian userspace (with #define DEBUG 1 to get sdmode messages), here's what happens without PulseAudio: - When playback starts, speaker pops with "set sdmode to 1". - During playback, toggling "Speakers Switch" sets sdmode to 0/1 and mutes/unmutes speakers without any pops. - Pausing/resuming playback (like seeking on a media player) make pops without changing sdmode. Also pops when playback ends (e.g. when "speaker-test -l 1" quits). - A few seconds after playback ends, speaker pops for the last time with "set sdmode to 0". - Within that few seconds, toggling "Speakers Switch" sets sdmode to 0/1 and makes a pop each time. It's mostly the same with PulseAudio but: - Pause/resume during playback doesn't make any pops. - The penultimate pop happens a few seconds after playback stops, when PA says it's suspending the max98357a device (no sdmode changes). - The final pop comes a few seconds after that (still with "set sdmode to 0"). Even without any playback it makes several pops during boot when e.g. PulseAudio starts/stops running in the display manager or in the user session.

2 4