April 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: qcom: common: Silence duplicate parse error messages
by Bjorn Andersson 14 Apr '20

14 Apr '20

All error paths in qcom_snd_parse_of() prints more specific error messages, so silence the one in apq8096_platform_probe() and sdm845_snd_platform_probe() to avoid spamming the kernel log. Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> --- sound/soc/qcom/apq8096.c | 4 +--- sound/soc/qcom/sdm845.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index d55e3ad96716..287ad2aa27f3 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -116,10 +116,8 @@ static int apq8096_platform_probe(struct platform_device *pdev) card->dev = dev; dev_set_drvdata(dev, card); ret = qcom_snd_parse_of(card); - if (ret) { - dev_err(dev, "Error parsing OF data\n"); + if (ret) goto err; - } apq8096_add_be_ops(card); ret = snd_soc_register_card(card); diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index b2de65c7f95c..68e9388ff46f 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -559,10 +559,8 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev) card->dev = dev; dev_set_drvdata(dev, card); ret = qcom_snd_parse_of(card); - if (ret) { - dev_err(dev, "Error parsing OF data\n"); + if (ret) goto parse_dt_fail; - } data->card = card; snd_soc_card_set_drvdata(card, data); -- 2.24.0

2 1

Applied "ASoC: wsa881x: mark read_only_wordlength flag" to the asoc tree
by Mark Brown 14 Apr '20

14 Apr '20

The patch ASoC: wsa881x: mark read_only_wordlength flag has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 0f2a3b02274c02eb97697c4d89c019d1d21ac225 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Date: Tue, 14 Apr 2020 12:03:47 +0100 Subject: [PATCH] ASoC: wsa881x: mark read_only_wordlength flag WSA881x works in PDM mode so the wordlength is fixed, which also makes the only field "WordLength" in DPN_BlockCtrl1 register a read-only. Writing to this register will throw up errors with Qualcomm Controller. So use ro_blockctrl1_reg flag to mark this field as read-only so that core will not write to this register. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Reviewed-by: Vinod Koul <vkoul(a)kernel.org> Link: https://lore.kernel.org/r/20200414110347.23829-1-srinivas.kandagatla@linaro… Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/wsa881x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index f2d6f2f81f14..d39d479e2378 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -394,6 +394,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { .min_ch = 1, .max_ch = 1, .simple_ch_prep_sm = true, + .read_only_wordlength = true, }, { /* COMP */ .num = 2, @@ -401,6 +402,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { .min_ch = 1, .max_ch = 1, .simple_ch_prep_sm = true, + .read_only_wordlength = true, }, { /* BOOST */ .num = 3, @@ -408,6 +410,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { .min_ch = 1, .max_ch = 1, .simple_ch_prep_sm = true, + .read_only_wordlength = true, }, { /* VISENSE */ .num = 4, @@ -415,6 +418,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { .min_ch = 1, .max_ch = 1, .simple_ch_prep_sm = true, + .read_only_wordlength = true, } }; -- 2.20.1

1 0

[PATCH] ASoC: madera: Remove a couple of stray blank lines
by Charles Keepax 14 Apr '20

14 Apr '20

Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/codecs/madera.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c index 40de9d7811d1f..a448d2a2918a9 100644 --- a/sound/soc/codecs/madera.c +++ b/sound/soc/codecs/madera.c @@ -1903,7 +1903,6 @@ const struct soc_enum madera_isrc_fsh[] = { MADERA_ISRC4_FSH_SHIFT, 0xf, MADERA_RATE_ENUM_SIZE, madera_rate_text, madera_rate_val), - }; EXPORT_SYMBOL_GPL(madera_isrc_fsh); @@ -1924,7 +1923,6 @@ const struct soc_enum madera_isrc_fsl[] = { MADERA_ISRC4_FSL_SHIFT, 0xf, MADERA_RATE_ENUM_SIZE, madera_rate_text, madera_rate_val), - }; EXPORT_SYMBOL_GPL(madera_isrc_fsl); @@ -1938,7 +1936,6 @@ const struct soc_enum madera_asrc1_rate[] = { MADERA_ASYNC_RATE_ENUM_SIZE, madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE, madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE), - }; EXPORT_SYMBOL_GPL(madera_asrc1_rate); @@ -1964,7 +1961,6 @@ const struct soc_enum madera_asrc2_rate[] = { MADERA_ASYNC_RATE_ENUM_SIZE, madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE, madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE), - }; EXPORT_SYMBOL_GPL(madera_asrc2_rate); -- 2.11.0

2 1

[PATCH v2 1/3] dt-bindings: sound: convert rockchip i2s bindings to yaml
by Johan Jonker 14 Apr '20

14 Apr '20

Current dts files with 'i2s' nodes are manually verified. In order to automate this process rockchip-i2s.txt has to be converted to yaml. Signed-off-by: Johan Jonker <jbx6244(a)gmail.com> Reviewed-by: Rob Herring <robh(a)kernel.org> --- Changed V2: Add Reviewed-by --- .../devicetree/bindings/sound/rockchip-i2s.txt | 49 ---------- .../devicetree/bindings/sound/rockchip-i2s.yaml | 106 +++++++++++++++++++++ 2 files changed, 106 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.yaml diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt deleted file mode 100644 index 54aefab71..000000000 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Rockchip I2S controller - -The I2S bus (Inter-IC sound bus) is a serial link for digital -audio data transfer between devices in the system. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-i2s": for rk3066 - - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30 - - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 - - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 - - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328 - - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366 - - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368 - - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399 -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the I2S interrupt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain the following: - - "i2s_hclk": clock for I2S BUS - - "i2s_clk" : clock for I2S controller -- rockchip,playback-channels: max playback channels, if not set, 8 channels default. -- rockchip,capture-channels: max capture channels, if not set, 2 channels default. - -Required properties for controller which support multi channels -playback/capture: - -- rockchip,grf: the phandle of the syscon node for GRF register. - -Example for rk3288 I2S controller: - -i2s@ff890000 { - compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; - reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma1 0>, <&pdma1 1>; - dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <2>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml new file mode 100644 index 000000000..eff06b4b5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip I2S controller + +description: + The I2S bus (Inter-IC sound bus) is a serial link for digital + audio data transfer between devices in the system. + +maintainers: + - Heiko Stuebner <heiko(a)sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3066-i2s + - items: + - enum: + - rockchip,px30-i2s + - rockchip,rk3036-i2s + - rockchip,rk3188-i2s + - rockchip,rk3228-i2s + - rockchip,rk3288-i2s + - rockchip,rk3328-i2s + - rockchip,rk3366-i2s + - rockchip,rk3368-i2s + - rockchip,rk3399-i2s + - const: rockchip,rk3066-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for I2S controller + - description: clock for I2S BUS + + clock-names: + items: + - const: i2s_clk + - const: i2s_hclk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rockchip,capture-channels: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Max capture channels, if not set, 2 channels default. + + rockchip,playback-channels: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + description: + Max playback channels, if not set, 8 channels default. + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + Required property for controllers which support multi channel + playback/capture. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma1 0>, <&pdma1 1>; + dma-names = "tx", "rx"; + rockchip,capture-channels = <2>; + rockchip,playback-channels = <8>; + }; -- 2.11.0

3 4

Regression on Intel Atom/SST/Baytrail devices w/ v5.7-rc1
by Pierre-Louis Bossart 14 Apr '20

14 Apr '20

Hi, With Mark's for-next tree and v5.7-rc1 I get these really bad errors with the Atom/SST driver on a Baytrail device - found by accident while trying to validate UCM changes. [ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01 [ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed [ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed Trying to bisect, the errors change at some point: [c77b8317ee3ab43634421afb73fdb1ea253d3d47] ASoC: mediatek: mt8183-da7219: use SND_SOC_DAPM_PINCTRL in TDM out [ 9.387540] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for Headset Playback [ 9.387551] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for media1_in [ 9.387556] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for media0_out mix 0 [ 9.387561] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for media0_out [ 9.387566] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for pcm0_in [ 9.387570] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for modem_out mix 0 [ 9.387575] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for modem_out [ 9.387580] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for codec_out0 mix 0 [ 9.387584] bytcr_rt5640 bytcr_rt5640: ASoC: can't get playback BE for codec_out0 And then from [5d3c644773925c3568617435e42a9404a114c428] drm/mediatek: support HDMI jack status reporting to v5.6-rc1 I get those time outs... [ 21.031638] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 [ 21.031661] intel_sst_acpi 80860F28:00: fw returned err -16 [ 21.031692] sst-mfld-platform sst-mfld-platform: ASoC: PRE_PMD: pcm0_in event failed: -16 Both 5.5 and 5.6 work though, as if we are missing a set of dependencies? I am running out of time this evening, but I'd be good to see if anyone else reproduces my findings. Thanks -Pierre

2 2

[alsa-devel] [PATCH] alsactl: avoid needless wakeups in monitor loop.
by Zev Weiss 14 Apr '20

14 Apr '20

The timeout wasn't really being used for anything; disabling it should reduce idle energy consumption slightly. Signed-off-by: Zev Weiss <zev(a)bewilderbeest.net> --- alsactl/monitor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/alsactl/monitor.c b/alsactl/monitor.c index 6b090e4f5c92..6d9328d899a4 100644 --- a/alsactl/monitor.c +++ b/alsactl/monitor.c @@ -340,7 +340,7 @@ static int run_dispatcher(int epfd, int sigfd, int infd, struct list_head *srcs, int count; int i; - count = epoll_wait(epfd, epev, max_ev_count, 200); + count = epoll_wait(epfd, epev, max_ev_count, -1); if (count < 0) { err = count; break; -- 2.23.0

3 3

[alsa-devel] [PATCH] alsactl: don't exit on EINTR from epoll_wait().
by Zev Weiss 14 Apr '20

14 Apr '20

Previously, things like attaching strace to a running 'alsactl monitor' process would cause it to exit. Signed-off-by: Zev Weiss <zev(a)bewilderbeest.net> --- alsactl/monitor.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/alsactl/monitor.c b/alsactl/monitor.c index 6b090e4f5c92..cf4167bee165 100644 --- a/alsactl/monitor.c +++ b/alsactl/monitor.c @@ -342,6 +342,8 @@ static int run_dispatcher(int epfd, int sigfd, int infd, struct list_head *srcs, count = epoll_wait(epfd, epev, max_ev_count, 200); if (count < 0) { + if (errno == EINTR) + continue; err = count; break; } -- 2.23.0

3 2

[PATCH] ASoC: tas571x: disable regulators on failed probe
by Philipp Puschmann 14 Apr '20

14 Apr '20

If probe fails after enabling the regulators regulator_put is called for each supply without having them disabled before. This produces some warnings like WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c [<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14) [<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4) [<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4) [<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c) [<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38) [<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38) [<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c) [<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c) [<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c) [<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60) [<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc) [<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0) [<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0) [<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108) [<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88) [<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250) [<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244) [<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540) [<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8) [<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers) Signed-off-by: Philipp Puschmann <p.puschmann(a)pironex.de> --- sound/soc/codecs/tas571x.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 1554631cb397..5b7f9fcf6cbf 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client, priv->regmap = devm_regmap_init(dev, NULL, client, priv->chip->regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + goto disable_regs; + } priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW); if (IS_ERR(priv->pdn_gpio)) { @@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); if (ret) - return ret; + goto disable_regs; usleep_range(50000, 60000); @@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client, */ ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0); if (ret) - return ret; + goto disable_regs; } - return devm_snd_soc_register_component(&client->dev, + ret = devm_snd_soc_register_component(&client->dev, &priv->component_driver, &tas571x_dai, 1); + if (ret) + goto disable_regs; + + return ret; + +disable_regs: + regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies); + return ret; } static int tas571x_i2c_remove(struct i2c_client *client) -- 2.26.0

2 2

Applied "ASoC: tas571x: disable regulators on failed probe" to the asoc tree
by Mark Brown 14 Apr '20

14 Apr '20

The patch ASoC: tas571x: disable regulators on failed probe has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 9df8ba7c63073508e5aa677dade48fcab6a6773e Mon Sep 17 00:00:00 2001 From: Philipp Puschmann <p.puschmann(a)pironex.de> Date: Tue, 14 Apr 2020 13:27:54 +0200 Subject: [PATCH] ASoC: tas571x: disable regulators on failed probe If probe fails after enabling the regulators regulator_put is called for each supply without having them disabled before. This produces some warnings like WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c [<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14) [<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4) [<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4) [<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c) [<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38) [<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38) [<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c) [<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c) [<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c) [<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60) [<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc) [<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0) [<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0) [<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108) [<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88) [<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250) [<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244) [<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540) [<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8) [<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers) Signed-off-by: Philipp Puschmann <p.puschmann(a)pironex.de> Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.de Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tas571x.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 1554631cb397..5b7f9fcf6cbf 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client, priv->regmap = devm_regmap_init(dev, NULL, client, priv->chip->regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + goto disable_regs; + } priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW); if (IS_ERR(priv->pdn_gpio)) { @@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); if (ret) - return ret; + goto disable_regs; usleep_range(50000, 60000); @@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client, */ ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0); if (ret) - return ret; + goto disable_regs; } - return devm_snd_soc_register_component(&client->dev, + ret = devm_snd_soc_register_component(&client->dev, &priv->component_driver, &tas571x_dai, 1); + if (ret) + goto disable_regs; + + return ret; + +disable_regs: + regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies); + return ret; } static int tas571x_i2c_remove(struct i2c_client *client) -- 2.20.1

1 0

[PATCH] ASoC: amd: Fix button configuration
by Akshu Agrawal 14 Apr '20

14 Apr '20

RT5682 buttons were incorrectly mapped. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- sound/soc/amd/acp3x-rt5682-max9836.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index 024a7ee54cd5..e499c00e0c66 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -89,9 +89,9 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd) } snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); - snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOLUMEUP); - snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN); - snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOICECOMMAND); + snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); ret = snd_soc_component_set_jack(component, &pco_jack, NULL); if (ret) { -- 2.20.1

2 1