May 2019 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] Boot procudure on HDA driver
by Kailang 13 May '19

13 May '19

Hi Takashi, When System Boot up. The Hda Driver running step was as below. alc_init(); alc_shutup(); alc_init(); The depop procedure was put in spec->init_hook and spec->shutup. But I find more codec which run spec->shutup at boot up. It will occur pop noise. If it doesn't run spec->shutup, it will not occur pop noise or reduce pop noise. How could the spec->shutup not run at boot up? I ever test to put the check in spec->shutup() for PM_EVENT_SUSPEND and PM_EVENT_HIBERNATE and shutdown. But if power_save=1, it was have issue for this. Codec was idle already in power_save=1 state. If system go suspend, it will not run spec->shutup() again. BR, Kailang

2 3

[alsa-devel] alsa-lib-1.1.6.tar.bz2: some files are missing in the tarball
by Lars Wendler 13 May '19

13 May '19

Hello list, please have a look at this Gentoo bug report [1] where a user reported that he cannot compile alsa-lib-1.1.6 with --enable-alisp configure option. The error message is: make[3]: *** No rule to make target 'SI7018/sndoc-mixer.alisp', needed by 'all-am'. Stop. This happens because the directory src/conf/cards/SI7018 is missing as well as the following files: src/conf/cards/aliases.alisp src/conf/smixer.conf src/conf/sndo-mixer.alisp First I thought those files were removed intentionally but checking the alsa-lib git tree I can see all files still being available. So at Gentoo we fixed this by re-adding the files through a patch [2]. Any chance this was an accidental oversight? Kind regards Lars [1] https://bugs.gentoo.org/652422 [2] https://gitweb.gentoo.org/repo/gentoo.git/tree/media-libs/alsa-lib/files/al… P.S.: Please CC me on replies as I am not subscribed to the list. -- Lars Wendler Gentoo package maintainer GPG: 21CC CF02 4586 0A07 ED93 9F68 498F E765 960E 9B39

2 3

Re: [alsa-devel] [PATCH 03/16] lib, treewide: add new match_string() helper/macro
by Andy Shevchenko 13 May '19

13 May '19

On Wed, May 08, 2019 at 02:28:29PM +0300, Alexandru Ardelean wrote: > This change re-introduces `match_string()` as a macro that uses > ARRAY_SIZE() to compute the size of the array. > The macro is added in all the places that do > `match_string(_a, ARRAY_SIZE(_a), s)`, since the change is pretty > straightforward. Can you split include/linux/ change from the rest? > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> > --- > drivers/clk/bcm/clk-bcm2835.c | 4 +--- > drivers/gpio/gpiolib-of.c | 2 +- > drivers/gpu/drm/i915/intel_pipe_crc.c | 2 +- > drivers/mfd/omap-usb-host.c | 2 +- > drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 2 +- > drivers/pci/pcie/aer.c | 2 +- > drivers/usb/common/common.c | 4 ++-- > drivers/usb/typec/class.c | 8 +++----- > drivers/usb/typec/tps6598x.c | 2 +- > drivers/vfio/vfio.c | 4 +--- > include/linux/string.h | 9 +++++++++ > sound/firewire/oxfw/oxfw.c | 2 +- > sound/soc/codecs/max98088.c | 2 +- > sound/soc/codecs/max98095.c | 2 +- > 14 files changed, 25 insertions(+), 22 deletions(-) > > diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c > index a775f6a1f717..1ab388590ead 100644 > --- a/drivers/clk/bcm/clk-bcm2835.c > +++ b/drivers/clk/bcm/clk-bcm2835.c > @@ -1390,9 +1390,7 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, > for (i = 0; i < data->num_mux_parents; i++) { > parents[i] = data->parents[i]; > > - ret = __match_string(cprman_parent_names, > - ARRAY_SIZE(cprman_parent_names), > - parents[i]); > + ret = match_string(cprman_parent_names, parents[i]); > if (ret >= 0) > parents[i] = cprman->real_parent_names[ret]; > } > diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c > index 27d6f04ab58e..71e886869d78 100644 > --- a/drivers/gpio/gpiolib-of.c > +++ b/drivers/gpio/gpiolib-of.c > @@ -279,7 +279,7 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char * > if (!con_id) > return ERR_PTR(-ENOENT); > > - i = __match_string(whitelist, ARRAY_SIZE(whitelist), con_id); > + i = match_string(whitelist, con_id); > if (i < 0) > return ERR_PTR(-ENOENT); > > diff --git a/drivers/gpu/drm/i915/intel_pipe_crc.c b/drivers/gpu/drm/i915/intel_pipe_crc.c > index 286fad1f0e08..6fc4f3d3d1f6 100644 > --- a/drivers/gpu/drm/i915/intel_pipe_crc.c > +++ b/drivers/gpu/drm/i915/intel_pipe_crc.c > @@ -449,7 +449,7 @@ display_crc_ctl_parse_source(const char *buf, enum intel_pipe_crc_source *s) > return 0; > } > > - i = __match_string(pipe_crc_sources, ARRAY_SIZE(pipe_crc_sources), buf); > + i = match_string(pipe_crc_sources, buf); > if (i < 0) > return i; > > diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c > index 9aaacb5bdb26..53dff34c0afc 100644 > --- a/drivers/mfd/omap-usb-host.c > +++ b/drivers/mfd/omap-usb-host.c > @@ -509,7 +509,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev, > continue; > > /* get 'enum usbhs_omap_port_mode' from port mode string */ > - ret = __match_string(port_modes, ARRAY_SIZE(port_modes), mode); > + ret = match_string(port_modes, mode); > if (ret < 0) { > dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", > i, mode); > diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c > index 59ce3ff35553..778b4dfd8b75 100644 > --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c > +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c > @@ -667,7 +667,7 @@ iwl_dbgfs_bt_force_ant_write(struct iwl_mvm *mvm, char *buf, > }; > int ret, bt_force_ant_mode; > > - ret = __match_string(modes_str, ARRAY_SIZE(modes_str), buf); > + ret = match_string(modes_str, buf); > if (ret < 0) > return ret; > > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c > index 41a0773a1cbc..2278caba109c 100644 > --- a/drivers/pci/pcie/aer.c > +++ b/drivers/pci/pcie/aer.c > @@ -203,7 +203,7 @@ void pcie_ecrc_get_policy(char *str) > { > int i; > > - i = __match_string(ecrc_policy_str, ARRAY_SIZE(ecrc_policy_str), str); > + i = match_string(ecrc_policy_str, str); > if (i < 0) > return; > > diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c > index bca0c404c6ca..5a651d311d38 100644 > --- a/drivers/usb/common/common.c > +++ b/drivers/usb/common/common.c > @@ -68,7 +68,7 @@ enum usb_device_speed usb_get_maximum_speed(struct device *dev) > if (ret < 0) > return USB_SPEED_UNKNOWN; > > - ret = __match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed); > + ret = match_string(speed_names, maximum_speed); > > return (ret < 0) ? USB_SPEED_UNKNOWN : ret; > } > @@ -106,7 +106,7 @@ static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str) > { > int ret; > > - ret = __match_string(usb_dr_modes, ARRAY_SIZE(usb_dr_modes), str); > + ret = match_string(usb_dr_modes, str); > return (ret < 0) ? USB_DR_MODE_UNKNOWN : ret; > } > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c > index 4abc5a76ec51..38ac776cba8a 100644 > --- a/drivers/usb/typec/class.c > +++ b/drivers/usb/typec/class.c > @@ -1409,8 +1409,7 @@ EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); > */ > int typec_find_port_power_role(const char *name) > { > - return __match_string(typec_port_power_roles, > - ARRAY_SIZE(typec_port_power_roles), name); > + return match_string(typec_port_power_roles, name); > } > EXPORT_SYMBOL_GPL(typec_find_port_power_role); > > @@ -1424,7 +1423,7 @@ EXPORT_SYMBOL_GPL(typec_find_port_power_role); > */ > int typec_find_power_role(const char *name) > { > - return __match_string(typec_roles, ARRAY_SIZE(typec_roles), name); > + return match_string(typec_roles, name); > } > EXPORT_SYMBOL_GPL(typec_find_power_role); > > @@ -1438,8 +1437,7 @@ EXPORT_SYMBOL_GPL(typec_find_power_role); > */ > int typec_find_port_data_role(const char *name) > { > - return __match_string(typec_port_data_roles, > - ARRAY_SIZE(typec_port_data_roles), name); > + return match_string(typec_port_data_roles, name); > } > EXPORT_SYMBOL_GPL(typec_find_port_data_role); > > diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c > index 0389e4391faf..0c4e47868590 100644 > --- a/drivers/usb/typec/tps6598x.c > +++ b/drivers/usb/typec/tps6598x.c > @@ -423,7 +423,7 @@ static int tps6598x_check_mode(struct tps6598x *tps) > if (ret) > return ret; > > - switch (__match_string(modes, ARRAY_SIZE(modes), mode)) { > + switch (match_string(modes, mode)) { > case TPS_MODE_APP: > return 0; > case TPS_MODE_BOOT: > diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c > index b31585ecf48f..fe8283d3781b 100644 > --- a/drivers/vfio/vfio.c > +++ b/drivers/vfio/vfio.c > @@ -637,9 +637,7 @@ static bool vfio_dev_whitelisted(struct device *dev, struct device_driver *drv) > return true; > } > > - return __match_string(vfio_driver_whitelist, > - ARRAY_SIZE(vfio_driver_whitelist), > - drv->name) >= 0; > + return match_string(vfio_driver_whitelist, drv->name) >= 0; > } > > /* > diff --git a/include/linux/string.h b/include/linux/string.h > index 531d04308ff9..07e9f89088df 100644 > --- a/include/linux/string.h > +++ b/include/linux/string.h > @@ -194,6 +194,15 @@ static inline int strtobool(const char *s, bool *res) > int __match_string(const char * const *array, size_t n, const char *string); > int __sysfs_match_string(const char * const *array, size_t n, const char *s); > > +/** > + * match_string - matches given string in an array > + * @_a: array of strings > + * @_s: string to match with > + * > + * Helper for __match_string(). Calculates the size of @a automatically. > + */ > +#define match_string(_a, _s) __match_string(_a, ARRAY_SIZE(_a), _s) > + > /** > * sysfs_match_string - matches given string in an array > * @_a: array of strings > diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c > index 9ec5316f3bb5..433fc84c4f90 100644 > --- a/sound/firewire/oxfw/oxfw.c > +++ b/sound/firewire/oxfw/oxfw.c > @@ -57,7 +57,7 @@ static bool detect_loud_models(struct fw_unit *unit) > if (err < 0) > return false; > > - return __match_string(models, ARRAY_SIZE(models), model) >= 0; > + return match_string(models, model) >= 0; > } > > static int name_card(struct snd_oxfw *oxfw) > diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c > index 3ef743075bda..911ffe84c37e 100644 > --- a/sound/soc/codecs/max98088.c > +++ b/sound/soc/codecs/max98088.c > @@ -1405,7 +1405,7 @@ static int max98088_get_channel(struct snd_soc_component *component, const char > { > int ret; > > - ret = __match_string(eq_mode_name, ARRAY_SIZE(eq_mode_name), name); > + ret = match_string(eq_mode_name, name); > if (ret < 0) > dev_err(component->dev, "Bad EQ channel name '%s'\n", name); > return ret; > diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c > index cd69916d5dcb..d182d45d0c83 100644 > --- a/sound/soc/codecs/max98095.c > +++ b/sound/soc/codecs/max98095.c > @@ -1636,7 +1636,7 @@ static int max98095_get_bq_channel(struct snd_soc_component *component, > { > int ret; > > - ret = __match_string(bq_mode_name, ARRAY_SIZE(bq_mode_name), name); > + ret = match_string(bq_mode_name, name); > if (ret < 0) > dev_err(component->dev, "Bad biquad channel name '%s'\n", name); > return ret; > -- > 2.17.1 > -- With Best Regards, Andy Shevchenko

4 5

[alsa-devel] [PATCH v2 0/4] ASoC: hdmi-codec: fixes and improvements
by Jerome Brunet 12 May '19

12 May '19

This patchset is a collection of fixes and improvement on the hdmi codec driver. It should be completely transparent for the current users of the codec. The most important change is removal the current_substream pointer which allows the codec to be used on codec-to-codec links. I plan to use this for the HDMI sound support of the Amlogic g12a SoC family. Changes since v1: * Drop already applied patches * Rebase patchset on sound/for-next Jerome Brunet (4): ASoC: hdmi-codec: remove function name debug traces ASoC: hdmi-codec: remove reference to the current substream ASoC: hdmi-codec: remove reference to the dai drivers in the private data ASoC: hdmi-codec: remove ops dependency on the dai id sound/soc/codecs/hdmi-codec.c | 188 ++++++++++++++++------------------ 1 file changed, 91 insertions(+), 97 deletions(-) -- 2.20.1

2 15

[alsa-devel] 1.1.9: test suite issue: axfer/test -> container-test loops forever
by GitHub issues - opened 11 May '19

11 May '19

alsa-project/alsa-utils issue #19 was opened from kloczek: Looks like it is some issue with axfer/test -> container-test. This test cannot finishe and looks like it is looping and cannot finish. Just in case: nothing is written on stdout/stderr or container-test.log. axfer/test/hoge file is constantly written and deleted. <pre>[tkloczko@domek test]$ strace -f /bin/sh ../../test-driver --test-name container-test --log-file container-test.log --trs-file container-test.trs --color-tests yes --enable-hard-errors yes --expect-failure no -- ./container-test execve("/bin/sh", ["/bin/sh", "../../test-driver", "--test-name", "container-test", "--log-file", "container-test.log", "--trs-file", "container-test.trs", "--color-tests", "yes", "--enable-hard-errors", "yes", "--expect-failure", "no", "--", "./container-test"], 0x7fff8aab0350 /* 67 vars */) = 0 brk(NULL) = 0x559a60017000 arch_prctl(0x3001 /* ARCH_??? */, 0x7ffce069bb50) = -1 EINVAL (Invalid argument) access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=188179, ...}) = 0 mmap(NULL, 188179, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e422c000 close(3) = 0 openat(AT_FDCWD, "/lib64/libtinfo.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\363\0\0\0\0\0\0"..., 832) = 832 lseek(3, 169216, SEEK_SET) = 169216 read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 fstat(3, {st_mode=S_IFREG|0755, st_size=285768, ...}) = 0 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd3e422a000 lseek(3, 169216, SEEK_SET) = 169216 read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 mmap(NULL, 190848, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd3e41fb000 mmap(0x7fd3e4209000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7fd3e4209000 mmap(0x7fd3e4218000, 53248, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d000) = 0x7fd3e4218000 mmap(0x7fd3e4225000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x29000) = 0x7fd3e4225000 close(3) = 0 openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\"\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=56640, ...}) = 0 mmap(NULL, 24688, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd3e41f4000 mmap(0x7fd3e41f6000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fd3e41f6000 mmap(0x7fd3e41f8000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7fd3e41f8000 mmap(0x7fd3e41f9000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7fd3e41f9000 mmap(0x7fd3e41fa000, 112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fd3e41fa000 close(3) = 0 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200p\2\0\0\0\0\0"..., 832) = 832 lseek(3, 64, SEEK_SET) = 64 read(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 784) = 784 lseek(3, 848, SEEK_SET) = 848 read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 lseek(3, 880, SEEK_SET) = 880 read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0\0052`U\224\217\3<\204\4\231e\235\313\324 "..., 68) = 68 fstat(3, {st_mode=S_IFREG|0755, st_size=5577040, ...}) = 0 lseek(3, 64, SEEK_SET) = 64 read(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 784) = 784 lseek(3, 848, SEEK_SET) = 848 read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 lseek(3, 880, SEEK_SET) = 880 read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0\0052`U\224\217\3<\204\4\231e\235\313\324 "..., 68) = 68 mmap(NULL, 1852600, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fd3e402f000 mprotect(0x7fd3e4054000, 1662976, PROT_NONE) = 0 mmap(0x7fd3e4054000, 1359872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7fd3e4054000 mmap(0x7fd3e41a0000, 299008, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x171000) = 0x7fd3e41a0000 mmap(0x7fd3e41ea000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ba000) = 0x7fd3e41ea000 mmap(0x7fd3e41f0000, 13496, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fd3e41f0000 close(3) = 0 mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd3e402c000 arch_prctl(ARCH_SET_FS, 0x7fd3e402c740) = 0 mprotect(0x7fd3e41ea000, 12288, PROT_READ) = 0 mprotect(0x7fd3e41f9000, 4096, PROT_READ) = 0 mprotect(0x7fd3e4225000, 16384, PROT_READ) = 0 mprotect(0x559a5eca6000, 16384, PROT_READ) = 0 mprotect(0x7fd3e4284000, 4096, PROT_READ) = 0 munmap(0x7fd3e422c000, 188179) = 0 openat(AT_FDCWD, "/dev/tty", O_RDWR|O_NONBLOCK) = 3 close(3) = 0 brk(NULL) = 0x559a60017000 brk(0x559a60038000) = 0x559a60038000 brk(NULL) = 0x559a60038000 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2997, ...}) = 0 read(3, "# Locale name alias data base.\n#"..., 4096) = 2997 read(3, "", 4096) = 0 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_IDENTIFICATION", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=373, ...}) = 0 mmap(NULL, 373, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e4283000 close(3) = 0 openat(AT_FDCWD, "/usr/lib64/gconv/gconv-modules.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=26998, ...}) = 0 mmap(NULL, 26998, PROT_READ, MAP_SHARED, 3, 0) = 0x7fd3e4253000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=23, ...}) = 0 mmap(NULL, 23, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e4252000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_TELEPHONE", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=56, ...}) = 0 mmap(NULL, 56, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e4251000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_ADDRESS", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=158, ...}) = 0 mmap(NULL, 158, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e4250000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_NAME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_NAME", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=77, ...}) = 0 mmap(NULL, 77, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424f000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_PAPER", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=34, ...}) = 0 mmap(NULL, 34, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424e000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFDIR|0755, st_size=30, ...}) = 0 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_MESSAGES/SYS_LC_MESSAGES", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=57, ...}) = 0 mmap(NULL, 57, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424d000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=290, ...}) = 0 mmap(NULL, 290, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424c000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_COLLATE", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2586930, ...}) = 0 mmap(NULL, 2586930, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e3db4000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_TIME", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=3332, ...}) = 0 mmap(NULL, 3332, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424b000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=54, ...}) = 0 mmap(NULL, 54, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e424a000 close(3) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.utf8/LC_CTYPE", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=340008, ...}) = 0 mmap(NULL, 340008, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fd3e3d60000 close(3) = 0 getuid() = 1000 getgid() = 1000 geteuid() = 1000 getegid() = 1000 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 ioctl(-1, TIOCGPGRP, 0x7ffce069b9b4) = -1 EBADF (Bad file descriptor) sysinfo({uptime=447376, loads=[64256, 115168, 149856], totalram=8272330752, freeram=130670592, sharedram=986529792, bufferram=106496, totalswap=0, freeswap=0, procs=1208, totalhigh=0, freehigh=0, mem_unit=1}) = 0 rt_sigaction(SIGCHLD, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGCHLD, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigaction(SIGTSTP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGTSTP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigaction(SIGTTIN, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGTTIN, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigaction(SIGTTOU, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGTTOU, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGQUIT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 uname({sysname="Linux", nodename="domek", ...}) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat("/home/tkloczko/rpmbuild/BUILD/alsa-utils-1.1.9/axfer/test", {st_mode=S_IFDIR|0755, st_size=532, ...}) = 0 stat(".", {st_mode=S_IFDIR|0755, st_size=532, ...}) = 0 stat("/home", {st_mode=S_IFDIR|0755, st_size=16, ...}) = 0 stat("/home/tkloczko", {st_mode=S_IFDIR|0755, st_size=2148, ...}) = 0 stat("/home/tkloczko/rpmbuild", {st_mode=S_IFDIR|0755, st_size=1464, ...}) = 0 stat("/home/tkloczko/rpmbuild/BUILD", {st_mode=S_IFDIR|0755, st_size=2344, ...}) = 0 stat("/home/tkloczko/rpmbuild/BUILD/alsa-utils-1.1.9", {st_mode=S_IFDIR|0755, st_size=966, ...}) = 0 stat("/home/tkloczko/rpmbuild/BUILD/alsa-utils-1.1.9/axfer", {st_mode=S_IFDIR|0755, st_size=1634, ...}) = 0 stat("/home/tkloczko/rpmbuild/BUILD/alsa-utils-1.1.9/axfer/test", {st_mode=S_IFDIR|0755, st_size=532, ...}) = 0 stat("/home/tkloczko/rpmbuild/BUILD/alsa-utils-1.1.9/axfer", {st_mode=S_IFDIR|0755, st_size=1634, ...}) = 0 getpid() = 24893 getppid() = 24890 getpid() = 24893 getpgrp() = 24890 ioctl(2, TIOCGPGRP, [24890]) = 0 rt_sigaction(SIGCHLD, {sa_handler=0x559a5ebecd60, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, 8) = 0 prlimit64(0, RLIMIT_NPROC, NULL, {rlim_cur=31438, rlim_max=31438}) = 0 openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_MEASUREMENT", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_PAPER", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_MONETARY", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_TIME", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/locale/en_GB.UTF-8/LC_NUMERIC", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 openat(AT_FDCWD, "../../test-driver", O_RDONLY) = 3 stat("../../test-driver", {st_mode=S_IFREG|0755, st_size=4645, ...}) = 0 ioctl(3, TCGETS, 0x7ffce069b940) = -1 ENOTTY (Inappropriate ioctl for device) lseek(3, 0, SEEK_CUR) = 0 read(3, "#!/usr/bin/sh\n# test-driver - ba"..., 80) = 80 lseek(3, 0, SEEK_SET) = 0 prlimit64(0, RLIMIT_NOFILE, NULL, {rlim_cur=1024, rlim_max=512*1024}) = 0 fcntl(255, F_GETFD) = -1 EBADF (Bad file descriptor) dup2(3, 255) = 255 close(3) = 0 fcntl(255, F_SETFD, FD_CLOEXEC) = 0 fcntl(255, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE) fstat(255, {st_mode=S_IFREG|0755, st_size=4645, ...}) = 0 lseek(255, 0, SEEK_CUR) = 0 read(255, "#!/usr/bin/sh\n# test-driver - ba"..., 4645) = 4645 rt_sigaction(SIGHUP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGHUP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [HUP], [], 8) = 0 rt_sigaction(SIGHUP, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 rt_sigaction(SIGINT, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGPIPE, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGPIPE, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [PIPE], [], 8) = 0 rt_sigaction(SIGPIPE, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGTERM, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0 rt_sigaction(SIGTERM, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [TERM], [], 8) = 0 rt_sigaction(SIGTERM, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 lseek(255, -1344, SEEK_CUR) = 3301 clone(strace: Process 24894 attached child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fd3e402ca10) = 24894 [pid 24894] getpid( <unfinished ...> [pid 24893] rt_sigprocmask(SIG_SETMASK, [], <unfinished ...> [pid 24894] <... getpid resumed>) = 24894 [pid 24893] <... rt_sigprocmask resumed>NULL, 8) = 0 [pid 24894] close(255 <unfinished ...> [pid 24893] rt_sigprocmask(SIG_BLOCK, [CHLD], <unfinished ...> [pid 24894] <... close resumed>) = 0 [pid 24893] <... rt_sigprocmask resumed>[], 8) = 0 [pid 24894] rt_sigprocmask(SIG_SETMASK, [], <unfinished ...> [pid 24893] rt_sigprocmask(SIG_SETMASK, [], <unfinished ...> [pid 24894] <... rt_sigprocmask resumed>NULL, 8) = 0 [pid 24893] <... rt_sigprocmask resumed>NULL, 8) = 0 [pid 24894] rt_sigaction(SIGTSTP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, <unfinished ...> [pid 24893] rt_sigprocmask(SIG_BLOCK, [CHLD], <unfinished ...> [pid 24894] <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24893] <... rt_sigprocmask resumed>[], 8) = 0 [pid 24894] rt_sigaction(SIGTTIN, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, <unfinished ...> [pid 24893] rt_sigaction(SIGINT, {sa_handler=0x559a5ebe9810, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, <unfinished ...> [pid 24894] <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24893] <... rt_sigaction resumed>{sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGTTOU, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, <unfinished ...> [pid 24893] wait4(-1, <unfinished ...> [pid 24894] <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGHUP, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGPIPE, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGTERM, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, {sa_handler=0x559a5ec06c40, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] rt_sigaction(SIGCHLD, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, {sa_handler=0x559a5ebecd60, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART, sa_restorer=0x7fd3e4069f40}, 8) = 0 [pid 24894] openat(AT_FDCWD, "container-test.log", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 3 [pid 24894] dup2(3, 1) = 1 [pid 24894] close(3) = 0 [pid 24894] dup2(1, 2) = 2 [pid 24894] fcntl(1, F_GETFD) = 0 [pid 24894] execve("./container-test", ["./container-test"], 0x559a60029510 /* 67 vars */) = 0 [pid 24894] brk(NULL) = 0x55711c860000 [pid 24894] arch_prctl(0x3001 /* ARCH_??? */, 0x7ffff5c380a0) = -1 EINVAL (Invalid argument) [pid 24894] access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) [pid 24894] openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] fstat(3, {st_mode=S_IFREG|0644, st_size=188179, ...}) = 0 [pid 24894] mmap(NULL, 188179, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f302eae3000 [pid 24894] close(3) = 0 [pid 24894] openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200p\2\0\0\0\0\0"..., 832) = 832 [pid 24894] lseek(3, 64, SEEK_SET) = 64 [pid 24894] read(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 784) = 784 [pid 24894] lseek(3, 848, SEEK_SET) = 848 [pid 24894] read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 [pid 24894] lseek(3, 880, SEEK_SET) = 880 [pid 24894] read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0\0052`U\224\217\3<\204\4\231e\235\313\324 "..., 68) = 68 [pid 24894] fstat(3, {st_mode=S_IFREG|0755, st_size=5577040, ...}) = 0 [pid 24894] mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f302eae1000 [pid 24894] lseek(3, 64, SEEK_SET) = 64 [pid 24894] read(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 784) = 784 [pid 24894] lseek(3, 848, SEEK_SET) = 848 [pid 24894] read(3, "\4\0\0\0\20\0\0\0\5\0\0\0GNU\0\2\0\0\300\4\0\0\0\3\0\0\0\0\0\0\0", 32) = 32 [pid 24894] lseek(3, 880, SEEK_SET) = 880 [pid 24894] read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0\0052`U\224\217\3<\204\4\231e\235\313\324 "..., 68) = 68 [pid 24894] mmap(NULL, 1852600, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f302e91c000 [pid 24894] mprotect(0x7f302e941000, 1662976, PROT_NONE) = 0 [pid 24894] mmap(0x7f302e941000, 1359872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f302e941000 [pid 24894] mmap(0x7f302ea8d000, 299008, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x171000) = 0x7f302ea8d000 [pid 24894] mmap(0x7f302ead7000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ba000) = 0x7f302ead7000 [pid 24894] mmap(0x7f302eadd000, 13496, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f302eadd000 [pid 24894] close(3) = 0 [pid 24894] openat(AT_FDCWD, "/lib64/libasound.so.2", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260'\3\0\0\0\0\0"..., 832) = 832 [pid 24894] fstat(3, {st_mode=S_IFREG|0755, st_size=1157768, ...}) = 0 [pid 24894] mmap(NULL, 955152, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f302e832000 [pid 24894] mmap(0x7f302e85f000, 552960, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2d000) = 0x7f302e85f000 [pid 24894] mmap(0x7f302e8e6000, 184320, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xb4000) = 0x7f302e8e6000 [pid 24894] mmap(0x7f302e913000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe0000) = 0x7f302e913000 [pid 24894] close(3) = 0 [pid 24894] openat(AT_FDCWD, "/lib64/libm.so.6", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\363\0\0\0\0\0\0"..., 832) = 832 [pid 24894] fstat(3, {st_mode=S_IFREG|0755, st_size=3315312, ...}) = 0 [pid 24894] mmap(NULL, 1331216, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f302e6ec000 [pid 24894] mmap(0x7f302e6fb000, 638976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x7f302e6fb000 [pid 24894] mmap(0x7f302e797000, 626688, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xab000) = 0x7f302e797000 [pid 24894] mmap(0x7f302e830000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x143000) = 0x7f302e830000 [pid 24894] close(3) = 0 [pid 24894] openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\"\0\0\0\0\0\0"..., 832) = 832 [pid 24894] fstat(3, {st_mode=S_IFREG|0755, st_size=56640, ...}) = 0 [pid 24894] mmap(NULL, 24688, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f302e6e5000 [pid 24894] mmap(0x7f302e6e7000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f302e6e7000 [pid 24894] mmap(0x7f302e6e9000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f302e6e9000 [pid 24894] mmap(0x7f302e6ea000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f302e6ea000 [pid 24894] mmap(0x7f302e6eb000, 112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f302e6eb000 [pid 24894] close(3) = 0 [pid 24894] openat(AT_FDCWD, "/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3 [pid 24894] read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\202\0\0\0\0\0\0"..., 832) = 832 [pid 24894] lseek(3, 824, SEEK_SET) = 824 [pid 24894] read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0=K\6\363\272\306<\320\35\37vOsr\212\341"..., 68) = 68 [pid 24894] fstat(3, {st_mode=S_IFREG|0755, st_size=695360, ...}) = 0 [pid 24894] lseek(3, 824, SEEK_SET) = 824 [pid 24894] read(3, "\4\0\0\0\24\0\0\0\3\0\0\0GNU\0=K\6\363\272\306<\320\35\37vOsr\212\341"..., 68) = 68 [pid 24894] mmap(NULL, 131552, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f302e6c4000 [pid 24894] mmap(0x7f302e6cb000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f302e6cb000 [pid 24894] mmap(0x7f302e6da000, 20480, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f302e6da000 [pid 24894] mmap(0x7f302e6df000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f302e6df000 [pid 24894] mmap(0x7f302e6e1000, 12768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f302e6e1000 [pid 24894] close(3) = 0 [pid 24894] mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f302e6c2000 [pid 24894] arch_prctl(ARCH_SET_FS, 0x7f302e6c32c0) = 0 [pid 24894] mprotect(0x7f302ead7000, 12288, PROT_READ) = 0 [pid 24894] mprotect(0x7f302e6df000, 4096, PROT_READ) = 0 [pid 24894] mprotect(0x7f302e6ea000, 4096, PROT_READ) = 0 [pid 24894] mprotect(0x7f302e830000, 4096, PROT_READ) = 0 [pid 24894] mprotect(0x7f302e913000, 32768, PROT_READ) = 0 [pid 24894] mprotect(0x55711c760000, 4096, PROT_READ) = 0 [pid 24894] mprotect(0x7f302eb3b000, 4096, PROT_READ) = 0 [pid 24894] munmap(0x7f302eae3000, 188179) = 0 [pid 24894] set_tid_address(0x7f302e6c3590) = 24894 [pid 24894] set_robust_list(0x7f302e6c35a0, 24) = 0 [pid 24894] rt_sigaction(SIGRTMIN, {sa_handler=0x7f302e6cbc50, sa_mask=[], sa_flags=SA_RESTORER|SA_SIGINFO, sa_restorer=0x7f302e6d7d40}, NULL, 8) = 0 [pid 24894] rt_sigaction(SIGRT_1, {sa_handler=0x7f302e6cbcf0, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f302e6d7d40}, NULL, 8) = 0 [pid 24894] rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 [pid 24894] prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0 [pid 24894] openat(AT_FDCWD, "/dev/urandom", O_RDONLY) = 3 [pid 24894] brk(NULL) = 0x55711c860000 [pid 24894] brk(0x55711c881000) = 0x55711c881000 [pid 24894] brk(NULL) = 0x55711c881000 [pid 24894] read(3, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 4500) = 4500 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\20\261\2\0\20\261\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\20\261\2\0\20\261\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\20\261\2\0\20\261\2\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0\356\2\0\0\356\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\0\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0\356\2\0\0\356\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\0\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\0\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\0\356\2\0\0\356\2\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\0\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25", 23) = 23 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] unlink("hoge") = -1 ENOENT (No such file or directory) [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\4\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\4\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\4\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0D\254\0\0D\254\0\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\4\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\4\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\4\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\4\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\200\273\0\0\200\273\0\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\4\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\4\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\4\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\4\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\210X\1\0\210X\1\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\4\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\4\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\4\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDONLY|O_NONBLOCK) = 4 [pid 24894] read(4, "RIFF", 4) = 4 [pid 24894] read(4, "_\4\0\0", 4) = 4 [pid 24894] read(4, "WAVE", 4) = 4 [pid 24894] read(4, "fmt \20\0\0\0", 8) = 8 [pid 24894] read(4, "\1\0\1\0\0w\1\0\0w\1\0\1\0\10\0", 16) = 16 [pid 24894] read(4, "data\27\4\0\0", 8) = 8 [pid 24894] read(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] close(4) = 0 [pid 24894] unlink("hoge") = 0 [pid 24894] openat(AT_FDCWD, "hoge", O_RDWR|O_CREAT|O_TRUNC|O_NONBLOCK, 0644) = 4 [pid 24894] write(4, "RIFF\377\377\377\377", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\20\261\2\0\20\261\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\333\377\377\377", 8) = 8 [pid 24894] write(4, "\346\317xj\341.\354\2\213C9\370\240\320\216\3340=\366\27#\257\25\246\334W\337\222RK\262\200"..., 1047) = 1047 [pid 24894] lseek(4, 0, SEEK_SET) = 0 [pid 24894] write(4, "RIFF_\4\0\0", 8) = 8 [pid 24894] write(4, "WAVE", 4) = 4 [pid 24894] write(4, "fmt \20\0\0\0\1\0\1\0\20\261\2\0\20\261\2\0\1\0\10\0", 24) = 24 [pid 24894] write(4, "data\27\4\0\0", 8) = 8 [pid 24894] fsync(4) = 0 [pid 24894] close(4) = 0 </pre> Issue URL : https://github.com/alsa-project/alsa-utils/issues/19 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[alsa-devel] Fix for Lenovo B50-70 inverted internal microphone bug
by Michał Wadowski 11 May '19

11 May '19

I prepared patch for this bug: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1524215 I tested this patch on Linux 5.1.0 and it fixes problem on my Lenovo B50-70 laptop.

1 1

[alsa-devel] [PATCH] ASoC: SOF: Fix build error with CONFIG_SND_SOC_SOF_NOCODEC=m
by YueHaibing 10 May '19

10 May '19

Fix gcc build error while CONFIG_SND_SOC_SOF_NOCODEC=m sound/soc/sof/core.o: In function `snd_sof_device_probe': core.c:(.text+0x4af): undefined reference to `sof_nocodec_setup' Change SND_SOC_SOF_NOCODEC to bool to fix this. Reported-by: Hulk Robot <hulkci(a)huawei.com> Fixes: c16211d6226d ("ASoC: SOF: Add Sound Open Firmware driver core") Signed-off-by: YueHaibing <yuehaibing(a)huawei.com> --- sound/soc/sof/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig index b204c65..9c280c9 100644 --- a/sound/soc/sof/Kconfig +++ b/sound/soc/sof/Kconfig @@ -44,7 +44,7 @@ config SND_SOC_SOF_OPTIONS if SND_SOC_SOF_OPTIONS config SND_SOC_SOF_NOCODEC - tristate "SOF nocodec mode Support" + bool "SOF nocodec mode Support" help This adds support for a dummy/nocodec machine driver fallback option if no known codec is detected. This is typically only -- 2.7.4

3 15

[alsa-devel] [PATCH] Headset fixup for System76 Gazelle (gaze14)
by Jeremy Soller 10 May '19

10 May '19

A mistake was made in the identification of the four variants of the System76 Gazelle (gaze14). This patch corrects the PCI ID of the 17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants with PCI IDs 0x8560 and 0x8561. Tests were done on all four variants ensuring full audio capability. Signed-off-by: Jeremy Soller <jeremy(a)system76.com> --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b3712d87e98b..3e790b49c1c0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6901,7 +6901,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1558, 0x1325, "System76 Darter Pro (darp5)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8550, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1558, 0x8560, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x8551, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x8560, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1558, 0x8561, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS), SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),

2 2

[alsa-devel] [PATCH] ALSA: hda: Fix race between creating and refreshing sysfs entries
by Amadeusz Sławiński 10 May '19

10 May '19

hda_widget_sysfs_reinit() can free underlying codec->widgets structure on which widget_tree_create() operates. Add locking to prevent such issues from happening. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110382 Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- include/sound/hdaudio.h | 1 + sound/hda/hdac_sysfs.c | 22 +++++++++++++++++++--- sound/pci/hda/hda_codec.c | 2 ++ 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 45f944d57982..85835d0c33cc 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -81,6 +81,7 @@ struct hdac_device { atomic_t in_pm; /* suspend/resume being performed */ /* sysfs */ + struct mutex widget_lock; struct hdac_widget_tree *widgets; /* regmap */ diff --git a/sound/hda/hdac_sysfs.c b/sound/hda/hdac_sysfs.c index fb2aa344981e..5352e5db814c 100644 --- a/sound/hda/hdac_sysfs.c +++ b/sound/hda/hdac_sysfs.c @@ -399,21 +399,28 @@ int hda_widget_sysfs_init(struct hdac_device *codec) { int err; - if (codec->widgets) + mutex_lock(&codec->widget_lock); + if (codec->widgets) { + mutex_unlock(&codec->widget_lock); return 0; /* already created */ + } err = widget_tree_create(codec); if (err < 0) { widget_tree_free(codec); + mutex_unlock(&codec->widget_lock); return err; } + mutex_unlock(&codec->widget_lock); return 0; } void hda_widget_sysfs_exit(struct hdac_device *codec) { + mutex_lock(&codec->widget_lock); widget_tree_free(codec); + mutex_unlock(&codec->widget_lock); } int hda_widget_sysfs_reinit(struct hdac_device *codec, @@ -424,16 +431,23 @@ int hda_widget_sysfs_reinit(struct hdac_device *codec, hda_nid_t nid; int i; - if (!codec->widgets) + mutex_lock(&codec->widget_lock); + + if (!codec->widgets) { + mutex_unlock(&codec->widget_lock); return hda_widget_sysfs_init(codec); + } tree = kmemdup(codec->widgets, sizeof(*tree), GFP_KERNEL); - if (!tree) + if (!tree) { + mutex_unlock(&codec->widget_lock); return -ENOMEM; + } tree->nodes = kcalloc(num_nodes + 1, sizeof(*tree->nodes), GFP_KERNEL); if (!tree->nodes) { kfree(tree); + mutex_unlock(&codec->widget_lock); return -ENOMEM; } @@ -460,5 +474,7 @@ int hda_widget_sysfs_reinit(struct hdac_device *codec, codec->widgets = tree; kobject_uevent(tree->root, KOBJ_CHANGE); + + mutex_unlock(&codec->widget_lock); return 0; } diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 701a69d856f5..a5746df5c94b 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -870,6 +870,8 @@ static int snd_hda_codec_device_init(struct hda_bus *bus, struct snd_card *card, if (!codec) return -ENOMEM; + mutex_init(&codec->widget_lock); + sprintf(name, "hdaudioC%dD%d", card->number, codec_addr); err = snd_hdac_device_init(&codec->core, &bus->core, name, codec_addr); if (err < 0) { -- 2.17.1

2 1

Re: [alsa-devel] [PATCH 09/16] mmc: sdhci-xenon: use new match_string() helper/macro
by Ardelean, Alexandru 10 May '19

10 May '19

On Wed, 2019-05-08 at 16:26 +0300, Alexandru Ardelean wrote: > On Wed, 2019-05-08 at 15:20 +0300, Dan Carpenter wrote: > > > > > > On Wed, May 08, 2019 at 02:28:35PM +0300, Alexandru Ardelean wrote: > > > -static const char * const phy_types[] = { > > > - "emmc 5.0 phy", > > > - "emmc 5.1 phy" > > > -}; > > > - > > > enum xenon_phy_type_enum { > > > EMMC_5_0_PHY, > > > EMMC_5_1_PHY, > > > NR_PHY_TYPES > > > > There is no need for NR_PHY_TYPES now so you could remove that as well. > > > > I thought the same. > The only reason to keep NR_PHY_TYPES, is for potential future patches, > where it would be just 1 addition > > enum xenon_phy_type_enum { > EMMC_5_0_PHY, > EMMC_5_1_PHY, > + EMMC_5_2_PHY, > NR_PHY_TYPES > } > > Depending on style/preference of how to do enums (allow comma on last > enum > or not allow comma on last enum value), adding new enum values woudl be 2 > additions + 1 deletion lines. > > enum xenon_phy_type_enum { > EMMC_5_0_PHY, > - EMMC_5_1_PHY > + EMM > C_5_1_PHY, > + EMMC_5_2_PHY > } > > Either way (leave NR_PHY_TYPES or remove NR_PHY_TYPES) is fine from my > side. > Preference on this ? If no objection [nobody insists] I would keep. I don't feel strongly about it [dropping NR_PHY_TYPES or not]. Thanks Alex > Thanks > Alex > > > regards, > > dan carpenter > >

2 2