February 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 0/2] Add support for AK5558 ADC
by Daniel Baluta 16 Feb '18

16 Feb '18

We support normal mode, TDM mode and pm. Changes since v2: [addressed comments from Andy, Fabio and Rob] * sort include files * use probe_new * reword the binding document * use adc@10 instead of ak5558@10 * remove file name at the beginning of codec source code. * make i2c_probe and i2c_remove parameters naming consistent. Changes since v1: [addressed comments from Andy and Fabio] * fix GPIO polarity from active high to active low for correct documentation * fix license header by using SPDX identifier * remove debug prints at the beginning of functions. * only support auto clock switching (manual switching was dead code anyway) (in the future we could add a DT property to choose between manual and auto) * Use gpiod API * use GENMASK * introduce power_off/power_on One open question is the resume sequence which appears to need power_off/power_on. Just power_on alone isn't enough. With just power_on after resume aplay plays a song for 1 seconds and then the sound stops. Datasheet says, page 55" (1) The PDN pin should be held to “L” for more than 150 ns after AVDD and TVDD are powered up. Daniel Baluta (2): ASoC: codecs: Add support for AK5558 ADC driver ASoC: ak5558: Add bindings for AK5558 ADC Documentation/devicetree/bindings/sound/ak5558.txt | 22 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak5558.c | 618 +++++++++++++++++++++ sound/soc/codecs/ak5558.h | 52 ++ 5 files changed, 700 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt create mode 100644 sound/soc/codecs/ak5558.c create mode 100644 sound/soc/codecs/ak5558.h -- 2.7.4

5 10

[alsa-devel] [PATCH 0/2] ASoC: Intel: kabylake: Adds da7219+max98537 machine driver
by Naveen Manohar 16 Feb '18

16 Feb '18

Add kabylake machine driver & corresponding driver entry in machine table for maxim speaker codec - max98357a, configured to ssp0 and dialog headset codec - da7219, configured to ssp1. Naveen Manohar (2): ASoC: Intel: Add Kabylake-y Dialog Maxim machine driver ASoC: Intel: Add Kabylake Dialog+Maxim machine driver entry sound/soc/intel/boards/Kconfig | 14 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/kbl_da7219_max98357a.c | 613 ++++++++++++++++++++++++++ sound/soc/intel/skylake/skl.c | 13 + 4 files changed, 642 insertions(+) create mode 100644 sound/soc/intel/boards/kbl_da7219_max98357a.c -- 1.9.1

2 4

[alsa-devel] [PATCH v3 0/2] Add support for AK4458 DAC
by Cosmin-Gabriel Samoila 16 Feb '18

16 Feb '18

We support Normal Mode, TDM Mode and PM. Changes since V2: - remove unused code left from V1 - rewrite set_dai_fmt to only remember the format since - the format is rewritten in hw_params - use defined constants for mode in set_tdm_slot function - use GENMASK - add commit message for bindings patch - modify bindings description text since we only support I2C for now - rename ak4458_codec_probe to ak4458_probe - write whole implementation of regmap init and gpiod get in i2c_probe - added ak4458_remove where we power_off the chip Changes since V1: - support only i2c - i2c probe / remove/suspend/ resume moved into shared code - change enum array to separate variables - aggregate Volume control for Left and Right Channel - remove mux from DAPM - remove unused functions - remove unused controls - remove unused macros - use snd_soc_update_bits instead of soc_read + soc_write - use GPIOD - use SPDX identifier - use dac@10 instgitead of ak4458@10 - use explicit power_on/off functions - add __maybe_unused attribute - use probe_new for i2c_probe Cosmin-Gabriel Samoila (2): ASoC: codecs: Add support for AK4458 DAC driver ASoC: ak4458: Add bindings for AK4458 DAC Documentation/devicetree/bindings/sound/ak4458.txt | 23 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak4458.c | 659 +++++++++++++++++++++ sound/soc/codecs/ak4458.h | 86 +++ 5 files changed, 776 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak4458.txt create mode 100644 sound/soc/codecs/ak4458.c create mode 100644 sound/soc/codecs/ak4458.h -- 2.7.4

4 7

[alsa-devel] [PATCH v2] ASoC: sgtl5000: Fix suspend/resume
by Fabio Estevam 16 Feb '18

16 Feb '18

From: Fabio Estevam <fabio.estevam(a)nxp.com> Commit 8419caa72702 ("ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume sequence: # aplay /media/a2002011001-e02.wav Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error The problem is caused by the fact that the aforementioned commit dropped the cache handling, so re-introduce the register map resync to fix the problem. Suggested-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- Changes since v1: - Re-introduce cache handling (Mark). Mark, If this gets applied into next, then I can generate the fixes for the 4.9 and 4.14 stable versions later. Thanks sound/soc/codecs/sgtl5000.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index c26ac22..7514c77 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -871,15 +871,26 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, static int sgtl5000_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { + struct sgtl5000_priv *sgtl = snd_soc_component_get_drvdata(component); + int ret; + switch (level) { case SND_SOC_BIAS_ON: case SND_SOC_BIAS_PREPARE: case SND_SOC_BIAS_STANDBY: + regcache_cache_only(sgtl->regmap, false); + ret = regcache_sync(sgtl->regmap); + if (ret) { + regcache_cache_only(sgtl->regmap, true); + return ret; + } + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, SGTL5000_REFTOP_POWERUP); break; case SND_SOC_BIAS_OFF: + regcache_cache_only(sgtl->regmap, true); snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, 0); break; -- 2.7.4

2 1

[alsa-devel] WM8985 Machine Driver Write Error
by Mohammad, Jamal M 16 Feb '18

16 Feb '18

Hi Guys, We have a custom i.MX6 Board which has WM8985 audio codec. I developed machine level driver ( imx-wm8985.c ) looking at imx-wm8962 code. Driver loads fine without any error. "aplay -L" list the sound card. I2C interface works fine but it is write only peripheral. But when I am trying to play a Wav file using aplay, it fails with "aplay: pcm_write:1939: write error: Input/output error". Reading Online found that this happens when routing is incorrect. I am unable to proceed after this..Please help me to fix this issue. Here is my device tree. sound { compatible = "fsl,imx6q-sabresd-wm8985", "fsl,imx-audio-wm8985"; model = "wm8985-audio"; cpu-dai = <&ssi2>; audio-codec = <&codec>; audio-routing = "Ext Spk", "SPKL", "Ext Spk", "SPKR"; mux-int-port = <2>; mux-ext-port = <3>; }; Please provide me clue/hint to proceed and solve the issue. I can provide you more details if you need. Thanks for your help. Mohammad Jamal Mohiuddin Software Engineer, Retail Hosp/HW NCR Corporation India Pvt Ltd. MohammadJamal.Mohiuddin(a)ncr.com | www.ncr.com<http://www.ncr.com>

1 0

[alsa-devel] sgtl5000 fails after suspend/resume
by Fabio Estevam 15 Feb '18

15 Feb '18

Hi, I noticed that sgtl5000 does not work after a suspend/resume cycle: # aplay /media/a2002011001-e02.wav Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error Tested several 4.16-rc1 (and also previous kernels like 4.4) and all of them failed. I think it worked in some point in time. Tested on a imx53qsb and imx6 wandboard. Does anyone have any suggestions? Thanks, Fabio Estevam

3 5

[alsa-devel] [PATCH] ASoC: dmic: Add optional wakeup delay
by Matthias Kaehlcke 15 Feb '18

15 Feb '18

On some systems a delay is needed after switching on the clocks, to allow the DMIC output to stabilize and avoid a popping noise at the beginning of the recording. Add the optional device tree property 'wakeup-delay-ms' and apply the specified delay in the new dmic_daiops_prepare(). Signed-off-by: Matthias Kaehlcke <mka(a)chromium.org> --- .../devicetree/bindings/sound/dmic.txt | 2 + sound/soc/codecs/dmic.c | 54 ++++++++++++++----- 2 files changed, 42 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt index 54c8ef6498a8..de741c6609d0 100644 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -7,10 +7,12 @@ Required properties: Optional properties: - dmicen-gpios: GPIO specifier for dmic to control start and stop + - wakeup-delay-ms: Delay (in ms) after enabling the DMIC Example node: dmic_codec: dmic@0 { compatible = "dmic-codec"; dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + wakeup-delay-ms <50>; }; diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c index b88a1ee66f80..11f6abf11074 100644 --- a/sound/soc/codecs/dmic.c +++ b/sound/soc/codecs/dmic.c @@ -19,6 +19,7 @@ * */ +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> @@ -29,24 +30,38 @@ #include <sound/soc.h> #include <sound/soc-dapm.h> +struct dmic { + struct gpio_desc *gpio_en; + int wakeup_delay; +}; + +static int dmic_daiops_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct dmic *dmic = snd_soc_dai_get_drvdata(dai); + + if (dmic->gpio_en) + gpiod_set_value(dmic->gpio_en, 1); + + if (dmic->wakeup_delay) + msleep(dmic->wakeup_delay); + + return 0; +} + static int dmic_daiops_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { - struct gpio_desc *dmic_en = snd_soc_dai_get_drvdata(dai); + struct dmic *dmic = snd_soc_dai_get_drvdata(dai); - if (!dmic_en) + if (!dmic->gpio_en) return 0; switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - gpiod_set_value(dmic_en, 1); - break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - gpiod_set_value(dmic_en, 0); + gpiod_set_value(dmic->gpio_en, 0); break; } @@ -54,6 +69,7 @@ static int dmic_daiops_trigger(struct snd_pcm_substream *substream, } static const struct snd_soc_dai_ops dmic_dai_ops = { + .prepare = dmic_daiops_prepare, .trigger = dmic_daiops_trigger, }; @@ -73,14 +89,24 @@ static struct snd_soc_dai_driver dmic_dai = { static int dmic_codec_probe(struct snd_soc_codec *codec) { - struct gpio_desc *dmic_en; + struct dmic *dmic; + int err; + + dmic = devm_kzalloc(codec->dev, sizeof(*dmic), GFP_KERNEL); + if (!dmic) + return -ENOMEM; + + dmic->gpio_en = devm_gpiod_get_optional(codec->dev, + "dmicen", GPIOD_OUT_LOW); + if (IS_ERR(dmic->gpio_en)) + return PTR_ERR(dmic->gpio_en); - dmic_en = devm_gpiod_get_optional(codec->dev, - "dmicen", GPIOD_OUT_LOW); - if (IS_ERR(dmic_en)) - return PTR_ERR(dmic_en); + err = device_property_read_u32(codec->dev, "wakeup-delay-ms", + &dmic->wakeup_delay); + if (err && (err != -EINVAL)) + return err; - snd_soc_codec_set_drvdata(codec, dmic_en); + snd_soc_codec_set_drvdata(codec, dmic); return 0; } -- 2.16.1.291.g4437f3f132-goog

3 4

[alsa-devel] [PATCH v12 0/8] TDA1997x HDMI video reciver
by Tim Harvey 15 Feb '18

15 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media See details below for configuration and compliance tests History: v12: - fix coccinelle warnings v11: - return -ERANGE from tda1997x_detect_std (Hans) - clean up tda1997x_g_input_status (Hans) - show detected timings on resolution change if debug enabled - fix unitialized ret var in tda1997x_query_dv_timings - update log status to show detected timings v10: - removed unnecessary check for !timings in get/set/query dv timings (Hans) - dropped pointless s_stream handler (Hans) - remove need for detected_timings and always use set timings (Hans) v9: - add digital video decoder video interface entity function v8: - fix clearing pad for VIDIOC_DV_TIMIGNS_CAP - support full range of input modes based on timings_cap - add patch to fix clearing pad for VIDIOC_DV_TIMIGINGS - fix available formats for tda19971 bt656 bus width >12 - fix set_format (compliance) - fixed get/set edid (compliance) - add init_cfg to setup default pad config (compliance) - added missing pad checks to get_dv_timings_cap/enum_dv_timings (compliance) - fix alignment of if statement and whitespace in comment (Hans) - move regs to tda1997x_regs.h to clean up (Hans) - add define and sanity check for num of mbus_codes (Hans) v7: - fix interlaced mode - support no AVI infoframe (ie DVI) (Hans) - add support for multiple output formats (Hans) v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Pipeline configuration: $ media-ctl -e 'tda19971 2-0048' /dev/v4l-subdev1 $ v4l2-ctl -d /dev/v4l-subdev1 --set-dv-bt-timings=query BT timings set $ media-ctl --get-v4l2 '"tda19971 2-0048":0' [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] $ media-ctl --link "tda19971 2-0048":0 -> "ipu1_csi0_mux":1[1] $ media-ctl --link "ipu1_csi0_mux":2 -> "ipu1_csi0":0[1] $ media-ctl --link "ipu1_csi0":2 -> "ipu1_csi0 capture":0[1] $ media-ctl --set-v4l2 'tda19971 2-0048':0[fmt:UYVY8_2X8/1280x720] $ media-ctl --set-v4l2 'ipu1_csi0_mux':2[fmt:UYVY8_2X8/1280x720] $ media-ctl --set-v4l2 'ipu1_csi0':0[fmt:UYVY8_2X8/1280x720] $ gst-launch-1.0 v4l2src device=/dev/video4 ! video/x-raw,width=1280,height=720,format=UYVY ! jpegenc ! rtpjpegpay ! udpsink host=172.24.40.6 port=5000 $ media-ctl -d /dev/media0 -p Media controller API version 4.15.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.15.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x350@13000000 max:1920x1200@165000000 stds:CEA-861,DMT,CVT,GTF caps:interlaced,progressive,reduced-blanking,custom] [dv.detect:BT.656/1120 1280x720p60 (1650x750) stds:CEA-861 flags:can-reduce-fps,CE-video,has-cea861-vic] [dv.current:BT.656/1120 1280x720p60 (1650x750) stds:CEA-861 flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [ENABLED] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range crop.bounds:(0,0)/1280x720 crop:(0,0)/1280x720 compose.bounds:(0,0)/1280x720 compose:(0,0)/1280x720] <- "ipu1_csi0_mux":2 [ENABLED] pad1: Source [fmt:AYUV8_1X32/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [ENABLED] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [ENABLED] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] <- "tda19971 2-0048":0 [ENABLED] pad2: Source [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] -> "ipu1_csi0":0 [ENABLED] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: - with the following kernel patches: v4l2-subdev: clear reserved fields v4l2-subdev: without controls return -ENOTTY $ v4l2-compliance -u1 v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8 Compliance test for device /dev/v4l-subdev1: Media Driver Info: Driver name : imx-media Model : imx-media Serial : Bus info : Media version : 4.15.0 Hardware revision: 0x00000000 (0) Driver version : 4.15.0 Interface Info: ID : 0x0300008f Type : V4L Sub-Device Entity Info: ID : 0x00000003 (3) Name : tda19971 2-0048 Function : WARNING: Unknown Function (00006001), is v4l2-compliance out-of-date? Pad 0x01000004 : Source Link 0x0200006f: to remote pad 0x1000063 of entity 'ipu1_csi0_mux': Data, Enabled Required ioctls: test MC information (see 'Media Driver Info' above): OK Allow for multiple opens: test second /dev/v4l-subdev1 open: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK test VIDIOC_DV_TIMINGS_CAP: OK test VIDIOC_G/S_EDID: OK Sub-Device ioctls (Source Pad 0): test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Try VIDIOC_SUBDEV_G/S_FMT: OK test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_G/S_FMT: OK test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) test VIDIOC_EXPBUF: OK (Not Supported) Total: 47, Succeeded: 47, Failed: 0, Warnings: 0 $ v4l2-compliance -M0 v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8 Compliance test for device /dev/media0: Media Driver Info: Driver name : imx-media Model : imx-media Serial : Bus info : Media version : 4.15.0 Hardware revision: 0x00000000 (0) Driver version : 4.15.0 Required ioctls: test MEDIA_IOC_DEVICE_INFO: OK Allow for multiple opens: test second /dev/media0 open: OK test MEDIA_IOC_DEVICE_INFO: OK test for unlimited opens: OK Media Controller ioctls: fail: v4l2-test-media.cpp(96): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN fail: v4l2-test-media.cpp(161): checkFunction(ent.function, true) test MEDIA_IOC_G_TOPOLOGY: FAIL fail: v4l2-test-media.cpp(290): num_data_links != num_links test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL test MEDIA_IOC_SETUP_LINK: OK Total: 7, Succeeded: 5, Failed: 2, Warnings: 0 ^^^^ above failures are due to imx/adv7180 not setting a valid entity function Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (7): media: v4l-ioctl: fix clearing pad for VIDIOC_DV_TIMIGNS_CAP media: add digital video decoder video interface entity functions MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 ++ Documentation/media/uapi/mediactl/media-types.rst | 11 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 2822 ++++++++++++++++++++ drivers/media/i2c/tda1997x_regs.h | 641 +++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + drivers/media/v4l2-core/v4l2-ioctl.c | 2 +- include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 42 + include/media/v4l2-dv-timings.h | 21 + include/uapi/linux/media.h | 5 + 16 files changed, 4224 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 drivers/media/i2c/tda1997x_regs.h create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 10

[alsa-devel] [PATCH] ASoC: Intel: Fix build
by Mark Brown 15 Feb '18

15 Feb '18

One of the recently introduced commits hadn't been build tested, fix that. Reported-by: kbuild test robot <fengguang.wu(a)intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/hdac_hdmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 60bea9d69fc0..84f7a7a36e4b 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -722,12 +722,12 @@ static void hdac_hdmi_set_power_state(struct hdac_ext_device *edev, unsigned int state; if (get_wcaps(&edev->hdev, nid) & AC_WCAP_POWER) { - if (!snd_hdac_check_power_state(&edev->hdac, nid, pwr_state)) { + if (!snd_hdac_check_power_state(&edev->hdev, nid, pwr_state)) { for (count = 0; count < 10; count++) { - snd_hdac_codec_read(&edev->hdac, nid, 0, + snd_hdac_codec_read(&edev->hdev, nid, 0, AC_VERB_SET_POWER_STATE, pwr_state); - state = snd_hdac_sync_power_state(&edev->hdac, + state = snd_hdac_sync_power_state(&edev->hdev, nid, pwr_state); if (!(state & AC_PWRST_ERROR)) break; -- 2.16.1

1 1

[alsa-devel] [asoc:topic/intel 4/4] sound/soc/codecs/hdac_hdmi.c:725:42: error: 'struct hdac_ext_device' has no member named 'hdac'; did you mean 'hdev'?
by kbuild test robot 15 Feb '18

15 Feb '18

tree: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git topic/intel head: 753597fbb7031ff147d4f2862426699e4ad8efca commit: 753597fbb7031ff147d4f2862426699e4ad8efca [4/4] ASoC: hdac_hdmi : Ensuring proper setting of output widget power state config: i386-randconfig-x075-201806 (attached as .config) compiler: gcc-7 (Debian 7.3.0-1) 7.3.0 reproduce: git checkout 753597fbb7031ff147d4f2862426699e4ad8efca # save the attached .config to linux build tree make ARCH=i386 All errors (new ones prefixed by >>): sound/soc/codecs/hdac_hdmi.c: In function 'hdac_hdmi_set_power_state': >> sound/soc/codecs/hdac_hdmi.c:725:42: error: 'struct hdac_ext_device' has no member named 'hdac'; did you mean 'hdev'? if (!snd_hdac_check_power_state(&edev->hdac, nid, pwr_state)) { ^~~~ hdev sound/soc/codecs/hdac_hdmi.c:727:32: error: 'struct hdac_ext_device' has no member named 'hdac'; did you mean 'hdev'? snd_hdac_codec_read(&edev->hdac, nid, 0, ^~~~ hdev sound/soc/codecs/hdac_hdmi.c:730:46: error: 'struct hdac_ext_device' has no member named 'hdac'; did you mean 'hdev'? state = snd_hdac_sync_power_state(&edev->hdac, ^~~~ hdev vim +725 sound/soc/codecs/hdac_hdmi.c 717 718 static void hdac_hdmi_set_power_state(struct hdac_ext_device *edev, 719 hda_nid_t nid, unsigned int pwr_state) 720 { 721 int count; 722 unsigned int state; 723 724 if (get_wcaps(&edev->hdev, nid) & AC_WCAP_POWER) { > 725 if (!snd_hdac_check_power_state(&edev->hdac, nid, pwr_state)) { 726 for (count = 0; count < 10; count++) { 727 snd_hdac_codec_read(&edev->hdac, nid, 0, 728 AC_VERB_SET_POWER_STATE, 729 pwr_state); 730 state = snd_hdac_sync_power_state(&edev->hdac, 731 nid, pwr_state); 732 if (!(state & AC_PWRST_ERROR)) 733 break; 734 } 735 } 736 737 } 738 } 739 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation

3 2