February 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/2] cplay: fix size and nmemb of mp3 header of fread
by Katsuhiro Suzuki 01 Feb '18

01 Feb '18

This patch swaps 'size' and 'nmemb' arguments of fread. The fread returns always 1 (because 'nmemb' is 1) so checking the return value is always failure. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro(a)socionext.com> --- src/utils/cplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/utils/cplay.c b/src/utils/cplay.c index e0603fd..bc95f0d 100644 --- a/src/utils/cplay.c +++ b/src/utils/cplay.c @@ -220,7 +220,7 @@ void play_samples(char *name, unsigned int card, unsigned int device, exit(EXIT_FAILURE); } - read = fread(&header, sizeof(header), 1, file); + read = fread(&header, 1, sizeof(header), file); if (read != sizeof(header)) { fprintf(stderr, "Unable to read header \n"); fclose(file); -- 2.15.0

2 3

[alsa-devel] [PATCH v6 0/6] TDA1997x HDMI video receiver
by Tim Harvey 01 Feb '18

01 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - mbus format selection support for bus widths that support multiple formats - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Media device topology: # media-ctl -d /dev/media0 -p Media controller API version 4.13.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.13.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x480@13000000 max:1920x1080@165000000 stds:CEA-861,DMT caps:progressive] [dv.detect:BT.656/1120 640x480p59 (800x525) stds:CEA-861,DMT flags:has-cea861-vic] [dv.current:BT.656/1120 1920x1080p60 (2200x1125) stds:CEA-861,DMT flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu1_csi0_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "tda19971 2-0048":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu1_csi0":0 [] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: (on /dev/video6 as v4l2-compliance doesn't yet support subdevs) Driver Info: Driver name : imx-media-captu Card type : imx-media-capture Bus info : platform:ipu2_csi0 Driver version: 4.13.0 Capabilities : 0x84200001 Video Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) fail: v4l2-test-input-output.cpp(418): G_INPUT not supported for a capture device test VIDIOC_G/S/ENUMINPUT: FAIL test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK fail: v4l2-test-controls.cpp(574): g_ext_ctrls does not support count == 0 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Total: 42, Succeeded: 40, Failed: 2, Warnings: 0 Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (5): MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3476 ++++++++++++++++++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 41 + include/media/v4l2-dv-timings.h | 21 + 12 files changed, 4219 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 14

[alsa-devel] [PATCH - alsa-lib 1/1] Patch for two bugs in snd_pcm_area_silence().
by alsa2＠bushytails.net 01 Feb '18

01 Feb '18

From: furrywolf <alsa2(a)bushytails.net> First, after silencing the buffer 64 bits at a time, any remaining samples need to be silenced by the following width-specific code. However, instead of silencing the end of the buffer, the code instead re-silences the start of the buffer, leaving the end unsilenced. To fix this, update the pointer used by the width-specific code to point to the end of the area just silenced, instead of leaving it pointing to the start of the buffer. Second, the code for 24 bit samples can only silence a single sample, as there's no loop for multiple samples as with other formats. To fix this, add a loop similar to the ones used for every other width. The symptoms of these bugs are random data at the end of every supposedly silenced buffer with certain format/buffer size combinations, resulting in pops and noise. Signed-off-by: furrywolf <alsa2(a)bushytails.net> diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 69d7d66..1753cda 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -2955,6 +2955,7 @@ int snd_pcm_area_silence(const snd_pcm_channel_area_t *dst_area, snd_pcm_uframes *dstp++ = silence; if (samples == 0) return 0; + dst = (char *)dstp; } dst_step = dst_area->step / 8; switch (width) { @@ -2996,16 +2997,20 @@ int snd_pcm_area_silence(const snd_pcm_channel_area_t *dst_area, snd_pcm_uframes } break; } - case 24: + case 24: { + while (samples-- > 0) { #ifdef SNDRV_LITTLE_ENDIAN - *(dst + 0) = silence >> 0; - *(dst + 1) = silence >> 8; - *(dst + 2) = silence >> 16; + *(dst + 0) = silence >> 0; + *(dst + 1) = silence >> 8; + *(dst + 2) = silence >> 16; #else - *(dst + 2) = silence >> 0; - *(dst + 1) = silence >> 8; - *(dst + 0) = silence >> 16; + *(dst + 2) = silence >> 0; + *(dst + 1) = silence >> 8; + *(dst + 0) = silence >> 16; #endif + dst += dst_step; + } + } break; case 32: { uint32_t sil = silence; -- 1.7.10.4

2 2