July 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] New codec device ID for ALC1220
by Kailang 11 Jul '17

11 Jul '17

Hi Takashi, ALC1220 has another device ID. Attach patch was add 0x1168 device ID support. Many Thanks. BR, Kailang

2 1

[alsa-devel] [PATCH][-next] ASoC: rt5663: add in missing loop counter to avoid infinite loop
by Colin King 10 Jul '17

10 Jul '17

From: Colin Ian King <colin.king(a)canonical.com> The loop counter 'count' is missing an increment, so we could end up with an infinite loop. Add in a pre-increment to count to fix this. Detected by CoverityScan, CID#1450120 ("Logically Dead Code") Fixes: 1a425dbf1a10 ("ASoC: rt5663: Update the calibration funciton") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/soc/codecs/rt5663.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 82edbcf39caa..5b3c50c641d8 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -3044,7 +3044,7 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663) else break; - if (count > 200) + if (++count > 200) break; } -- 2.11.0

2 1

[alsa-devel] [PATCH] ASoC: rt5514: Move the auto disable DSP function to set_bias_level()
by Oder Chiou 10 Jul '17

10 Jul '17

Move the auto disable DSP function from the widget event "DAPM Pre" to the set_bias_level() function to avoid the unexpected behavior. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/soc/codecs/rt5514.c | 49 +++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 31 deletions(-) diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index 1b6796c..a71e630 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -471,35 +471,6 @@ static int rt5514_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, return 0; } -static int rt5514_pre_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); - struct rt5514_priv *rt5514 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_PRE_PMU: - /** - * If the DSP is enabled in start of recording, the DSP - * should be disabled, and sync back to normal recording - * settings to make sure recording properly. - */ - if (rt5514->dsp_enabled) { - rt5514->dsp_enabled = 0; - regmap_multi_reg_write(rt5514->i2c_regmap, - rt5514_i2c_patch, ARRAY_SIZE(rt5514_i2c_patch)); - regcache_mark_dirty(rt5514->regmap); - regcache_sync(rt5514->regmap); - } - break; - - default: - return 0; - } - - return 0; -} - static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = { /* Input Lines */ SND_SOC_DAPM_INPUT("DMIC1L"), @@ -607,8 +578,6 @@ static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = { /* Audio Interface */ SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0), - - SND_SOC_DAPM_PRE("DAPM Pre", rt5514_pre_event), }; static const struct snd_soc_dapm_route rt5514_dapm_routes[] = { @@ -975,6 +944,24 @@ static int rt5514_set_bias_level(struct snd_soc_codec *codec, } break; + case SND_SOC_BIAS_STANDBY: + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + /* + * If the DSP is enabled in start of recording, the DSP + * should be disabled, and sync back to normal recording + * settings to make sure recording properly. + */ + if (rt5514->dsp_enabled) { + rt5514->dsp_enabled = 0; + regmap_multi_reg_write(rt5514->i2c_regmap, + rt5514_i2c_patch, + ARRAY_SIZE(rt5514_i2c_patch)); + regcache_mark_dirty(rt5514->regmap); + regcache_sync(rt5514->regmap); + } + } + break; + default: break; } -- 2.7.4

2 2

[alsa-devel] [PATCH 1/2] ASoC: rt5663: Add the manual offset field to compensate the DC offset
by Oder Chiou 10 Jul '17

10 Jul '17

The patch adds the manual offset field in the devicetree to compensate the DC offset that will be different between the PCB layout. It only can be measured by the real production. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- Documentation/devicetree/bindings/sound/rt5663.txt | 5 ++ include/sound/rt5663.h | 20 ++++++++ sound/soc/codecs/rt5663.c | 55 ++++++++++++++++++++-- sound/soc/codecs/rt5663.h | 2 + 4 files changed, 77 insertions(+), 5 deletions(-) create mode 100644 include/sound/rt5663.h diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 70eaeae..f7c7cc5 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -12,6 +12,11 @@ Required properties: Optional properties: +- "realtek,dc_offset_l_manual" +- "realtek,dc_offset_r_manual" + Based on the different PCB layout, add the manual offset value to + compensate the DC offset for each L and R channel. + Pins on the device (for linking into audio routes) for RT5663: * IN1P diff --git a/include/sound/rt5663.h b/include/sound/rt5663.h new file mode 100644 index 0000000..be6f1b2 --- /dev/null +++ b/include/sound/rt5663.h @@ -0,0 +1,20 @@ +/* + * linux/sound/rt5663.h -- Platform data for RT5663 + * + * Copyright 2017 Realtek Semiconductor Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_RT5663_H +#define __LINUX_SND_RT5663_H + +struct rt5663_platform_data { + unsigned int dc_offset_l_manual; + unsigned int dc_offset_r_manual; +}; + +#endif + diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 82edbcf..52ecca4 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -40,6 +40,7 @@ enum { struct rt5663_priv { struct snd_soc_codec *codec; + struct rt5663_platform_data pdata; struct regmap *regmap; struct delayed_work jack_detect_work; struct snd_soc_jack *hs_jack; @@ -57,6 +58,10 @@ struct rt5663_priv { int jack_type; }; +static const struct reg_sequence rt5663_patch_list[] = { + { 0x002a, 0x8080 }, +}; + static const struct reg_default rt5663_v2_reg[] = { { 0x0000, 0x0000 }, { 0x0001, 0xc8c8 }, @@ -476,7 +481,7 @@ static const struct reg_default rt5663_reg[] = { { 0x0023, 0x0039 }, { 0x0026, 0xc0c0 }, { 0x0029, 0x8080 }, - { 0x002a, 0xa0a0 }, + { 0x002a, 0x8080 }, { 0x002c, 0x000c }, { 0x002d, 0x0000 }, { 0x0040, 0x0808 }, @@ -1958,15 +1963,11 @@ static const struct snd_kcontrol_new rt5663_adda_r_mix[] = { static const struct snd_kcontrol_new rt5663_sto1_dac_l_mix[] = { SOC_DAPM_SINGLE("DAC L Switch", RT5663_STO_DAC_MIXER, RT5663_M_DAC_L1_STO_L_SHIFT, 1, 1), - SOC_DAPM_SINGLE("DAC R Switch", RT5663_STO_DAC_MIXER, - RT5663_M_DAC_R1_STO_L_SHIFT, 1, 1), }; static const struct snd_kcontrol_new rt5663_sto1_dac_r_mix[] = { SOC_DAPM_SINGLE("DAC L Switch", RT5663_STO_DAC_MIXER, RT5663_M_DAC_L1_STO_R_SHIFT, 1, 1), - SOC_DAPM_SINGLE("DAC R Switch", RT5663_STO_DAC_MIXER, - RT5663_M_DAC_R1_STO_R_SHIFT, 1, 1), }; /* Out Switch */ @@ -3126,9 +3127,20 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663) usleep_range(10000, 10005); } +static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev) +{ + device_property_read_u32(dev, "realtek,dc_offset_l_manual", + &rt5663->pdata.dc_offset_l_manual); + device_property_read_u32(dev, "realtek,dc_offset_r_manual", + &rt5663->pdata.dc_offset_r_manual); + + return 0; +} + static int rt5663_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct rt5663_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt5663_priv *rt5663; int ret; unsigned int val; @@ -3142,6 +3154,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, rt5663); + if (pdata) + rt5663->pdata = *pdata; + else + rt5663_parse_dp(rt5663, &i2c->dev); + regmap = devm_regmap_init_i2c(i2c, &temp_regmap); if (IS_ERR(regmap)) { ret = PTR_ERR(regmap); @@ -3190,6 +3207,34 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, regmap_write(rt5663->regmap, RT5663_RESET, 0); dev_dbg(&i2c->dev, "calibrate done\n"); + switch (rt5663->codec_ver) { + case CODEC_VER_1: + break; + case CODEC_VER_0: + ret = regmap_register_patch(rt5663->regmap, rt5663_patch_list, + ARRAY_SIZE(rt5663_patch_list)); + if (ret != 0) + dev_warn(&i2c->dev, + "Failed to apply regmap patch: %d\n", ret); + break; + default: + dev_err(&i2c->dev, "%s:Unknown codec type\n", __func__); + } + + if (rt5663->pdata.dc_offset_l_manual) { + regmap_write(rt5663->regmap, RT5663_MIC_DECRO_2, + rt5663->pdata.dc_offset_l_manual >> 16); + regmap_write(rt5663->regmap, RT5663_MIC_DECRO_3, + rt5663->pdata.dc_offset_l_manual & 0xffff); + } + + if (rt5663->pdata.dc_offset_r_manual) { + regmap_write(rt5663->regmap, RT5663_MIC_DECRO_5, + rt5663->pdata.dc_offset_r_manual >> 16); + regmap_write(rt5663->regmap, RT5663_MIC_DECRO_6, + rt5663->pdata.dc_offset_r_manual & 0xffff); + } + /* GPIO1 as IRQ */ regmap_update_bits(rt5663->regmap, RT5663_GPIO_1, RT5663_GP1_PIN_MASK, RT5663_GP1_PIN_IRQ); diff --git a/sound/soc/codecs/rt5663.h b/sound/soc/codecs/rt5663.h index 4621812..c5a9b69 100644 --- a/sound/soc/codecs/rt5663.h +++ b/sound/soc/codecs/rt5663.h @@ -12,6 +12,8 @@ #ifndef __RT5663_H__ #define __RT5663_H__ +#include <sound/rt5663.h> + /* Info */ #define RT5663_RESET 0x0000 #define RT5663_VENDOR_ID 0x00fd -- 2.7.4

2 3

[alsa-devel] [PATCH] ASoC: Intel: Skylake: Fix default dma_buffer_size
by Subhransu S. Prusty 10 Jul '17

10 Jul '17

If the dma_buffer_size is not defined in topology, fix it to 2ms default value to make backward compatible. Fixes: f6e6ab1d16ec ("ASoC: Intel: Skylake: Fix dma buffer size calculation") Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty(a)intel.com> --- sound/soc/intel/skylake/skl-messages.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index eca85827dbd2..fb2f1f603f3c 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -540,6 +540,14 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, cpr_mconfig->gtw_cfg.dma_buffer_size = mconfig->dma_buffer_size * dma_io_buf; + /* fallback to 2ms default value */ + if (!cpr_mconfig->gtw_cfg.dma_buffer_size) { + if (mconfig->hw_conn_type == SKL_CONN_SOURCE) + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs; + else + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs; + } + cpr_mconfig->cpr_feature_mask = 0; cpr_mconfig->gtw_cfg.config_length = 0; -- 1.9.1

3 2

[alsa-devel] ALSA BLE MIDI
by happy musicmaker 10 Jul '17

10 Jul '17

Is there development for Bluetooth (BLE) MIDI under Linux ? More and more devices now support BLE MIDI. I have an BLE USB adapter that works fine with many MIDI BLE devices but the devices don't shop up in ALSA (Ubuntu 17.04). It seems Linux only supports audio devices.

2 1

[alsa-devel] MEDION sound devices informations
by fulgor fulgor 10 Jul '17

10 Jul '17

I have run the script alsa-info.SH www.alsa-project.org/db/?f=6fb68d0201f421b41fe65677fde2ec5b1c9d4429 thanks for all your work

1 0

[alsa-devel] [PATCH] ALSA: pcm: Simplify check for dma_mmap_coherent() availability
by Takashi Iwai 10 Jul '17

10 Jul '17

We check the availability of dma_mmap_coherent() in hw_support_mmap() but with an ugly ifdef of lots of arch-checks. Now we have a nice CONFIG_ARCH_NO_COHERENT_DMA_MMAP kconfig, and this can be used together with CONFIG_HAS_DMA check for a cleaner and more comprehensive check. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/pcm_native.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index b26c7e61d600..2a730f38e375 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -238,10 +238,8 @@ static bool hw_support_mmap(struct snd_pcm_substream *substream) { if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_MMAP)) return false; - /* check architectures that return -EINVAL from dma_mmap_coherent() */ - /* FIXME: this should be some global flag */ -#if defined(CONFIG_C6X) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) ||\ - defined(CONFIG_PARISC) || defined(CONFIG_XTENSA) + /* architecture supports dma_mmap_coherent()? */ +#if defined(CONFIG_ARCH_NO_COHERENT_DMA_MMAP) || !defined(CONFIG_HAS_DMA) if (!substream->ops->mmap && substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV) return false; -- 2.13.2

1 0

[alsa-devel] [PATCH] ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA
by Geert Uytterhoeven 10 Jul '17

10 Jul '17

If NO_DMA=y: sound/core/pcm_native.o: In function `snd_pcm_lib_default_mmap': pcm_native.c:(.text+0x144c): undefined reference to `bad_dma_ops' pcm_native.c:(.text+0x1474): undefined reference to `dma_common_mmap' Add a check for HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- sound/core/pcm_native.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index b3d5bed750297ec2..e540a22aa3d8988a 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3502,7 +3502,7 @@ int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream, } #endif /* CONFIG_GENERIC_ALLOCATOR */ #ifndef CONFIG_X86 /* for avoiding warnings arch/x86/mm/pat.c */ - if (!substream->ops->page && + if (IS_ENABLED(CONFIG_HAS_DMA) && !substream->ops->page && substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV) return dma_mmap_coherent(substream->dma_buffer.dev.dev, area, -- 2.7.4

2 1

[alsa-devel] arecord cannot interrupt streaming via CTRL-C when using voc_pcm_wirte()
by Wischer, Timo (ADITG/ESB) 10 Jul '17

10 Jul '17

Hi all, please merge following patch: >From fb58aa47b8715924667a0a4383ce9a3615378413 Mon Sep 17 00:00:00 2001 From: Srikanth Krishnakar <Srikanth_Krishnakar(a)mentor.com> Date: Mon, 19 Dec 2016 14:04:39 +0530 Subject: alsa-utils: interrupt streaming via signal in voc_pcm_write arecord (alsa-utils v1.1.2) cannot interrupt streaming via CTRL-C. Fixed the issue by properly handling 'in_aborting' flag in appropriate functions. Signed-off-by: Anant Agrawal <Anant_Agrawal(a)mentor.com> Signed-off-by: Mikhail Durnev <mikhail_durnev(a)mentor.com> Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar(a)mentor.com> Signed-off-by: Timo Wischer <twischer(a)de.adit-jv.com> --- aplay/aplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/aplay/aplay.c b/aplay/aplay.c index 2da7dda..cdaa1a8 100644 --- a/aplay/aplay.c +++ b/aplay/aplay.c @@ -2161,7 +2161,7 @@ static ssize_t voc_pcm_write(u_char *data, size_t count) ssize_t result = count, r; size_t size; - while (count > 0) { + while (count > 0 && !in_aborting) { size = count; if (size > chunk_bytes - buffer_pos) size = chunk_bytes - buffer_pos; -- 2.7.4 Best regards Timo Wischer Advanced Driver Information Technology GmbH Software Group I (ADITG/ESB) Robert-Bosch-Str. 200 31139 Hildesheim Germany Tel. +49 5121 49 6938 Fax +49 5121 49 6999 twischer(a)de.adit-jv.com ADIT is a joint venture company of Robert Bosch GmbH/Robert Bosch Car Multimedia GmbH and DENSO Corporation Sitz: Hildesheim, Registergericht: Amtsgericht Hildesheim HRB 3438 Geschäftsführung: Wilhelm Grabow, Ken Yaguchi

2 1