December 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v8 00/13] Introduce framework for SLIMbus device driver
by srinivas.kandagatla＠linaro.org 05 Dec '17

05 Dec '17

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Thanks for everyone who reviewed v7 patchset, here is v8 with review comments addressed. SLIMbus (Serial Low Power Interchip Media Bus) is a specification developed by MIPI (Mobile Industry Processor Interface) alliance. SLIMbus is a 2-wire implementation, which is used to communicate with peripheral components like audio-codec. SLIMbus uses Time-Division-Multiplexing to accommodate multiple data channels, and control channel. Control channel has messages to do device-enumeration, messages to send/receive control-data to/from SLIMbus devices, messages for port/channel management, and messages to do bandwidth allocation. Framework is introduced to support multiple instances of the bus (1 controller per bus), and multiple slave devices per controller. SPI and I2C frameworks, and comments from last time when I submitted the patches were referred-to while working on this framework. These patchsets introduce device-management, OF helpers, and messaging APIs, controller driver for Qualcomm's SLIMbus controller, and clock-pause feature for entering/exiting low-power mode for SLIMbus. Framework patches to do channel, port and bandwidth management are work-in-progress and will be sent out once these initial patches are accepted. These patchsets were tested on Qualcomm Snapdragon processor board using the controller driver, and a test slave device. v7: https://lwn.net/Articles/739150/ Changes from v7 to v8: * Fixed few warnings from kerneldoc * Few cosmetic fixes suggested by Vinod * made SLIMbus string usage more consistent with spec * made probe mandatory for slim device * replaced explicit info and value element apis with more generic api * made driver_data aligned * cleaned up qcom controller driver as suggested by Charles and Jonathan Sagar Dharia (9): Documentation: Add SLIMbus summary dt-bindings: Add SLIMbus bindings slimbus: Add SLIMbus bus type slimbus: core: Add slim controllers support slimbus: Add messaging APIs to slimbus framework slimbus: Add support for 'clock-pause' feature dt-bindings: Add qcom slimbus controller bindings slimbus: qcom: Add Qualcomm Slimbus controller driver slimbus: qcom: Add runtime-pm support using clock-pause Srinivas Kandagatla (4): slimbus: core: add support to device tree helper regmap: add SLIMbus support slimbus: core: add common defines required for controllers MAINTAINERS: Add SLIMbus maintainer Documentation/devicetree/bindings/slimbus/bus.txt | 50 ++ .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 39 ++ Documentation/driver-api/slimbus/index.rst | 15 + Documentation/driver-api/slimbus/summary.rst | 108 +++ MAINTAINERS | 8 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/base/regmap/Kconfig | 4 + drivers/base/regmap/Makefile | 1 + drivers/base/regmap/regmap-slimbus.c | 89 +++ drivers/slimbus/Kconfig | 22 + drivers/slimbus/Makefile | 9 + drivers/slimbus/core.c | 487 +++++++++++++ drivers/slimbus/messaging.c | 336 +++++++++ drivers/slimbus/qcom-ctrl.c | 756 +++++++++++++++++++++ drivers/slimbus/sched.c | 128 ++++ drivers/slimbus/slimbus.h | 268 ++++++++ include/linux/mod_devicetable.h | 13 + include/linux/regmap.h | 18 + include/linux/slimbus.h | 171 +++++ 20 files changed, 2525 insertions(+) create mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt create mode 100644 Documentation/driver-api/slimbus/index.rst create mode 100644 Documentation/driver-api/slimbus/summary.rst create mode 100644 drivers/base/regmap/regmap-slimbus.c create mode 100644 drivers/slimbus/Kconfig create mode 100644 drivers/slimbus/Makefile create mode 100644 drivers/slimbus/core.c create mode 100644 drivers/slimbus/messaging.c create mode 100644 drivers/slimbus/qcom-ctrl.c create mode 100644 drivers/slimbus/sched.c create mode 100644 drivers/slimbus/slimbus.h create mode 100644 include/linux/slimbus.h -- 2.15.0

6 20

[alsa-devel] [GIT PULL]: Cannonlake audio firware
by Vinod Koul 05 Dec '17

05 Dec '17

Hi, Please PULL to recieve the Cannonlake audio firmware. The following changes since commit 17e6288135d4500f9fe60224dce2b46d850c346b: brcm: update firmware for bcm4358 (2017-11-25 10:15:53 -0500) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/firmware.git cnl for you to fetch changes up to 89c62115f14dd8f414dfd2702913a6f1fcac3287: linux-firmware: intel: Add Cannonlake audio firmware (2017-12-04 09:04:57 +0530) ---------------------------------------------------------------- Vinod Koul (1): linux-firmware: intel: Add Cannonlake audio firmware WHENCE | 5 +++++ intel/dsp_fw_cnl.bin | 1 + intel/dsp_fw_cnl_v1191.bin | Bin 0 -> 583852 bytes 3 files changed, 6 insertions(+) create mode 120000 intel/dsp_fw_cnl.bin create mode 100644 intel/dsp_fw_cnl_v1191.bin -- ~Vinod

2 1

[alsa-devel] [PATCH 1/3] conf/ucm: Rearrange Makefile.am
by Takashi Iwai 05 Dec '17

05 Dec '17

Just rearrange and split to multiple lines to make future patches cleaner. No actual code change. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- configure.ac | 16 ++++++++-------- src/conf/ucm/Makefile.am | 16 +++++++++++++++- 2 files changed, 23 insertions(+), 9 deletions(-) diff --git a/configure.ac b/configure.ac index 22d65bb84882..83724e07459c 100644 --- a/configure.ac +++ b/configure.ac @@ -691,19 +691,20 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/cards/Makefile \ src/conf/pcm/Makefile \ src/conf/ucm/Makefile \ + src/conf/ucm/broadwell-rt286/Makefile \ + src/conf/ucm/broxton-rt298/Makefile \ + src/conf/ucm/bytcr-rt5651/Makefile \ + src/conf/ucm/chtrt5645/Makefile \ src/conf/ucm/DAISY-I2S/Makefile \ + src/conf/ucm/DB410c/Makefile \ + src/conf/ucm/GoogleNyan/Makefile \ src/conf/ucm/PandaBoard/Makefile \ src/conf/ucm/PandaBoardES/Makefile \ - src/conf/ucm/SDP4430/Makefile \ - src/conf/ucm/tegraalc5632/Makefile \ src/conf/ucm/PAZ00/Makefile \ - src/conf/ucm/GoogleNyan/Makefile \ - src/conf/ucm/broadwell-rt286/Makefile \ + src/conf/ucm/SDP4430/Makefile \ src/conf/ucm/skylake-rt286/Makefile \ + src/conf/ucm/tegraalc5632/Makefile \ src/conf/ucm/VEYRON-I2S/Makefile \ - src/conf/ucm/chtrt5645/Makefile \ - src/conf/ucm/DB410c/Makefile \ - src/conf/ucm/bytcr-rt5651/Makefile \ src/conf/topology/Makefile \ src/conf/topology/broadwell/Makefile \ modules/Makefile modules/mixer/Makefile modules/mixer/simple/Makefile \ @@ -711,7 +712,6 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/topology/bxtrt298/Makefile \ alsalisp/Makefile aserver/Makefile \ test/Makefile test/lsb/Makefile \ - src/conf/ucm/broxton-rt298/Makefile \ utils/Makefile utils/alsa-lib.spec utils/alsa.pc) dnl Create asoundlib.h dynamically according to configure options diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 2bd4ebe761ae..060d025f1bb5 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -1 +1,15 @@ -SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 skylake-rt286 VEYRON-I2S chtrt5645 DB410c broxton-rt298 bytcr-rt5651 +SUBDIRS=\ +broadwell-rt286 \ +broxton-rt298 \ +bytcr-rt5651 \ +chtrt5645 \ +DAISY-I2S \ +DB410c \ +GoogleNyan \ +PandaBoard \ +PandaBoardES \ +PAZ00 \ +SDP4430 \ +skylake-rt286 \ +tegraalc5632 \ +VEYRON-I2S -- 2.15.0

1 2

[alsa-devel] [alsa-lib][PATCH 3/4] pcm: linear, route: handle linear formats with 20-bit sample on 4 bytes
by Maciej S. Szmigiero 05 Dec '17

05 Dec '17

The previous patch has added 20-bit PCM formats SND_PCM_FORMAT_{S,U}20 to alsa-lib. We need to extend the linear format conversion code with handling of these sample formats so they can also be utilized by applications that only recognize the more typical ones like SND_PCM_FORMAT_S16. Since the conversion arrays are indexed by a format bit width divided by 8 the easiest way to handle these formats is to treat them like they were 40-bit wide (the next free integer multiple of 8 bits). This doesn't create a collision risk with a future format since there can't really be a 40-bit sample format that occupies 4 bytes. Make sure we use the getput conversion method for these formats since a direct conversion from / to them is not supported. While we are at it let's also add asserts on a format bit width value in snd_pcm_linear_get_index() and snd_pcm_linear_put_index() received from snd_pcm_format_width() so we won't try to access memory outside a conversion array if for some reason this function had returned a value that is not in the expected range. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- src/pcm/pcm_linear.c | 16 +++++++++++++--- src/pcm/pcm_route.c | 6 ++++-- src/pcm/plugin_ops.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 63 insertions(+), 9 deletions(-) diff --git a/src/pcm/pcm_linear.c b/src/pcm/pcm_linear.c index 0d61e927323f..e4973a308004 100644 --- a/src/pcm/pcm_linear.c +++ b/src/pcm/pcm_linear.c @@ -90,6 +90,7 @@ int snd_pcm_linear_get_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f endian = 0; pwidth = snd_pcm_format_physical_width(src_format); width = snd_pcm_format_width(src_format); + assert(width >= 8 && width <= 32); if (pwidth == 24) { switch (width) { case 24: @@ -100,8 +101,11 @@ int snd_pcm_linear_get_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f default: width = 2; break; } - return width * 4 + endian * 2 + sign + 16; + return width * 4 + endian * 2 + sign + 20; } else { + if (width == 20) + width = 40; + width = width / 8 - 1; return width * 4 + endian * 2 + sign; } @@ -121,6 +125,7 @@ int snd_pcm_linear_put_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f endian = 0; pwidth = snd_pcm_format_physical_width(dst_format); width = snd_pcm_format_width(dst_format); + assert(width >= 8 && width <= 32); if (pwidth == 24) { switch (width) { case 24: @@ -131,8 +136,11 @@ int snd_pcm_linear_put_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f default: width = 2; break; } - return width * 4 + endian * 2 + sign + 16; + return width * 4 + endian * 2 + sign + 20; } else { + if (width == 20) + width = 40; + width = width / 8 - 1; return width * 4 + endian * 2 + sign; } @@ -303,7 +311,9 @@ static int snd_pcm_linear_hw_params(snd_pcm_t *pcm, snd_pcm_hw_params_t *params) if (err < 0) return err; linear->use_getput = (snd_pcm_format_physical_width(format) == 24 || - snd_pcm_format_physical_width(linear->sformat) == 24); + snd_pcm_format_physical_width(linear->sformat) == 24 || + snd_pcm_format_width(format) == 20 || + snd_pcm_format_width(linear->sformat) == 20); if (linear->use_getput) { if (pcm->stream == SND_PCM_STREAM_PLAYBACK) { linear->get_idx = snd_pcm_linear_get_index(format, SND_PCM_FORMAT_S32); diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index 1f485a8e79f9..bbcc6118b593 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -565,10 +565,12 @@ static int snd_pcm_route_hw_params(snd_pcm_t *pcm, snd_pcm_hw_params_t * params) } if (err < 0) return err; - /* 3 bytes formats? */ + /* 3 bytes or 20-bit formats? */ route->params.use_getput = (snd_pcm_format_physical_width(src_format) + 7) / 8 == 3 || - (snd_pcm_format_physical_width(dst_format) + 7) / 8 == 3; + (snd_pcm_format_physical_width(dst_format) + 7) / 8 == 3 || + snd_pcm_format_width(src_format) == 20 || + snd_pcm_format_width(dst_format) == 20; route->params.get_idx = snd_pcm_linear_get_index(src_format, SND_PCM_FORMAT_S32); route->params.put_idx = snd_pcm_linear_put_index(SND_PCM_FORMAT_S32, dst_format); route->params.conv_idx = snd_pcm_linear_convert_index(src_format, dst_format); diff --git a/src/pcm/plugin_ops.h b/src/pcm/plugin_ops.h index 5a6016adb13a..a784d9c2b320 100644 --- a/src/pcm/plugin_ops.h +++ b/src/pcm/plugin_ops.h @@ -21,6 +21,12 @@ #ifndef SX_INLINES #define SX_INLINES +static inline uint32_t sx20(uint32_t x) +{ + if(x&0x00080000) + return x|0xFFF00000; + return x&0x000FFFFF; +} static inline uint32_t sx24(uint32_t x) { if(x&0x00800000) @@ -341,7 +347,7 @@ conv_1234_123C: as_u32(dst) = as_u32c(src) ^ 0x80; goto CONV_END; #ifdef GET16_LABELS /* src_wid src_endswap sign_toggle */ -static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { +static void *const get16_labels[5 * 2 * 2 + 4 * 3] = { &&get16_1_10, /* 8h -> 16h */ &&get16_1_90, /* 8h ^> 16h */ &&get16_1_10, /* 8s -> 16h */ @@ -350,6 +356,7 @@ static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { &&get16_12_92, /* 16h ^> 16h */ &&get16_12_21, /* 16s -> 16h */ &&get16_12_A1, /* 16s ^> 16h */ + /* 4 byte formats */ &&get16_0123_12, /* 24h -> 16h */ &&get16_0123_92, /* 24h ^> 16h */ &&get16_1230_32, /* 24s -> 16h */ @@ -358,6 +365,10 @@ static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { &&get16_1234_92, /* 32h ^> 16h */ &&get16_1234_43, /* 32s -> 16h */ &&get16_1234_C3, /* 32s ^> 16h */ + &&get16_0123_12_20, /* 20h -> 16h */ + &&get16_0123_92_20, /* 20h ^> 16h */ + &&get16_1230_32_20, /* 20s -> 16h */ + &&get16_1230_B2_20, /* 20s ^> 16h */ /* 3bytes format */ &&get16_123_12, /* 24h -> 16h */ &&get16_123_92, /* 24h ^> 16h */ @@ -390,6 +401,10 @@ get16_1234_12: sample = as_u32c(src) >> 16; goto GET16_END; get16_1234_92: sample = (as_u32c(src) >> 16) ^ 0x8000; goto GET16_END; get16_1234_43: sample = bswap_16(as_u32c(src)); goto GET16_END; get16_1234_C3: sample = bswap_16(as_u32c(src) ^ 0x80); goto GET16_END; +get16_0123_12_20: sample = as_u32c(src) >> 4; goto GET16_END; +get16_0123_92_20: sample = (as_u32c(src) >> 4) ^ 0x8000; goto GET16_END; +get16_1230_32_20: sample = bswap_32(as_u32c(src)) >> 4; goto GET16_END; +get16_1230_B2_20: sample = (bswap_32(as_u32c(src)) >> 4) ^ 0x8000; goto GET16_END; get16_123_12: sample = _get_triple(src) >> 8; goto GET16_END; get16_123_92: sample = (_get_triple(src) >> 8) ^ 0x8000; goto GET16_END; get16_123_32: sample = _get_triple_s(src) >> 8; goto GET16_END; @@ -407,7 +422,7 @@ get16_123_B2_18: sample = (_get_triple_s(src) >> 2) ^ 0x8000; goto GET16_END; #ifdef PUT16_LABELS /* dst_wid dst_endswap sign_toggle */ -static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { +static void *const put16_labels[5 * 2 * 2 + 4 * 3] = { &&put16_12_1, /* 16h -> 8h */ &&put16_12_9, /* 16h ^> 8h */ &&put16_12_1, /* 16h -> 8s */ @@ -416,6 +431,7 @@ static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { &&put16_12_92, /* 16h ^> 16h */ &&put16_12_21, /* 16h -> 16s */ &&put16_12_29, /* 16h ^> 16s */ + /* 4 byte formats */ &&put16_12_0120, /* 16h -> 24h */ &&put16_12_0920, /* 16h ^> 24h */ &&put16_12_0210, /* 16h -> 24s */ @@ -424,6 +440,10 @@ static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { &&put16_12_9200, /* 16h ^> 32h */ &&put16_12_0021, /* 16h -> 32s */ &&put16_12_0029, /* 16h ^> 32s */ + &&put16_12_0120_20, /* 16h -> 20h */ + &&put16_12_0920_20, /* 16h ^> 20h */ + &&put16_12_0210_20, /* 16h -> 20s */ + &&put16_12_0290_20, /* 16h ^> 20s */ /* 3bytes format */ &&put16_12_120, /* 16h -> 24h */ &&put16_12_920, /* 16h ^> 24h */ @@ -456,6 +476,10 @@ put16_12_1200: as_u32(dst) = (uint32_t)sample << 16; goto PUT16_END; put16_12_9200: as_u32(dst) = (uint32_t)(sample ^ 0x8000) << 16; goto PUT16_END; put16_12_0021: as_u32(dst) = (uint32_t)bswap_16(sample); goto PUT16_END; put16_12_0029: as_u32(dst) = (uint32_t)bswap_16(sample) ^ 0x80; goto PUT16_END; +put16_12_0120_20: as_u32(dst) = sx20((uint32_t)sample << 4); goto PUT16_END; +put16_12_0920_20: as_u32(dst) = sx20((uint32_t)(sample ^ 0x8000) << 4); goto PUT16_END; +put16_12_0210_20: as_u32(dst) = bswap_32(sx20((uint32_t)sample << 4)); goto PUT16_END; +put16_12_0290_20: as_u32(dst) = bswap_32(sx20((uint32_t)(sample ^ 0x8000) << 4)); goto PUT16_END; put16_12_120: _put_triple(dst, (uint32_t)sample << 8); goto PUT16_END; put16_12_920: _put_triple(dst, (uint32_t)(sample ^ 0x8000) << 8); goto PUT16_END; put16_12_021: _put_triple_s(dst, (uint32_t)sample << 8); goto PUT16_END; @@ -478,7 +502,7 @@ put16_12_029_18: _put_triple_s(dst, (uint32_t)(sample ^ 0x8000) << 2); goto PUT1 #ifdef GET32_LABELS /* src_wid src_endswap sign_toggle */ -static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { +static void *const get32_labels[5 * 2 * 2 + 4 * 3] = { &&get32_1_1000, /* 8h -> 32h */ &&get32_1_9000, /* 8h ^> 32h */ &&get32_1_1000, /* 8s -> 32h */ @@ -487,6 +511,7 @@ static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { &&get32_12_9200, /* 16h ^> 32h */ &&get32_12_2100, /* 16s -> 32h */ &&get32_12_A100, /* 16s ^> 32h */ + /* 4 byte formats */ &&get32_0123_1230, /* 24h -> 32h */ &&get32_0123_9230, /* 24h ^> 32h */ &&get32_1230_3210, /* 24s -> 32h */ @@ -495,6 +520,10 @@ static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { &&get32_1234_9234, /* 32h ^> 32h */ &&get32_1234_4321, /* 32s -> 32h */ &&get32_1234_C321, /* 32s ^> 32h */ + &&get32_0123_1230_20, /* 20h -> 32h */ + &&get32_0123_9230_20, /* 20h ^> 32h */ + &&get32_1230_3210_20, /* 20s -> 32h */ + &&get32_1230_B210_20, /* 20s ^> 32h */ /* 3bytes format */ &&get32_123_1230, /* 24h -> 32h */ &&get32_123_9230, /* 24h ^> 32h */ @@ -531,6 +560,10 @@ get32_1234_1234: sample = as_u32c(src); goto GET32_END; get32_1234_9234: sample = as_u32c(src) ^ 0x80000000; goto GET32_END; get32_1234_4321: sample = bswap_32(as_u32c(src)); goto GET32_END; get32_1234_C321: sample = bswap_32(as_u32c(src) ^ 0x80); goto GET32_END; +get32_0123_1230_20: sample = as_u32c(src) << 12; goto GET32_END; +get32_0123_9230_20: sample = (as_u32c(src) << 12) ^ 0x80000000; goto GET32_END; +get32_1230_3210_20: sample = bswap_32(as_u32c(src)) << 12; goto GET32_END; +get32_1230_B210_20: sample = (bswap_32(as_u32c(src)) << 12) ^ 0x80000000; goto GET32_END; get32_123_1230: sample = _get_triple(src) << 8; goto GET32_END; get32_123_9230: sample = (_get_triple(src) << 8) ^ 0x80000000; goto GET32_END; get32_123_3210: sample = _get_triple_s(src) << 8; goto GET32_END; @@ -553,7 +586,7 @@ __conv24_get: goto *put; #ifdef PUT32_LABELS /* dst_wid dst_endswap sign_toggle */ -static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { +static void *const put32_labels[5 * 2 * 2 + 4 * 3] = { &&put32_1234_1, /* 32h -> 8h */ &&put32_1234_9, /* 32h ^> 8h */ &&put32_1234_1, /* 32h -> 8s */ @@ -562,6 +595,7 @@ static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { &&put32_1234_92, /* 32h ^> 16h */ &&put32_1234_21, /* 32h -> 16s */ &&put32_1234_29, /* 32h ^> 16s */ + /* 4 byte formats */ &&put32_1234_0123, /* 32h -> 24h */ &&put32_1234_0923, /* 32h ^> 24h */ &&put32_1234_3210, /* 32h -> 24s */ @@ -570,6 +604,10 @@ static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { &&put32_1234_9234, /* 32h ^> 32h */ &&put32_1234_4321, /* 32h -> 32s */ &&put32_1234_4329, /* 32h ^> 32s */ + &&put32_1234_0123_20, /* 32h -> 20h */ + &&put32_1234_0923_20, /* 32h ^> 20h */ + &&put32_1234_3210_20, /* 32h -> 20s */ + &&put32_1234_3290_20, /* 32h ^> 20s */ /* 3bytes format */ &&put32_1234_123, /* 32h -> 24h */ &&put32_1234_923, /* 32h ^> 24h */ @@ -607,6 +645,10 @@ put32_1234_1234: as_u32(dst) = sample; goto PUT32_END; put32_1234_9234: as_u32(dst) = sample ^ 0x80000000; goto PUT32_END; put32_1234_4321: as_u32(dst) = bswap_32(sample); goto PUT32_END; put32_1234_4329: as_u32(dst) = bswap_32(sample) ^ 0x80; goto PUT32_END; +put32_1234_0123_20: as_u32(dst) = sx20(sample >> 12); goto PUT32_END; +put32_1234_0923_20: as_u32(dst) = sx20((sample ^ 0x80000000) >> 12); goto PUT32_END; +put32_1234_3210_20: as_u32(dst) = bswap_32(sx20(sample >> 12)); goto PUT32_END; +put32_1234_3290_20: as_u32(dst) = bswap_32(sx20((sample ^ 0x80000000) >> 12)); goto PUT32_END; put32_1234_123: _put_triple(dst, sample >> 8); goto PUT32_END; put32_1234_923: _put_triple(dst, (sample ^ 0x80000000) >> 8); goto PUT32_END; put32_1234_321: _put_triple_s(dst, sample >> 8); goto PUT32_END;

3 6

[alsa-devel] [PATCH] [v2] ASoC: atmel-classd: improve Kconfig dependencies
by Arnd Bergmann 05 Dec '17

05 Dec '17

Commit 061981ff8cc8 ("ASoC: atmel: properly select dma driver state") changed the way that the dependencies are handled, but then the Class D amplifier support got merged, which used the old method. This seems to have triggered a very rare randconfig condition for me now, leading to a link error: sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': atmel_ssc_dai.c:(.text+0x79c): undefined reference to `atmel_pcm_dma_platform_register' atmel_ssc_dai.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_register' sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_put_audio': atmel_ssc_dai.c:(.text+0xf24): undefined reference to `atmel_pcm_dma_platform_unregister' atmel_ssc_dai.c:(.text+0xf24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_unregister' This changes the SND_ATMEL_SOC_DMA option so it gets built whenever one of the two users (SND_ATMEL_SOC_SSC_DMA and SND_ATMEL_SOC_CLASSD) is enabled, with the twist that we make it built-in when SND_ATMEL_SOC_SSC is built-in, even if one of the other two is a module. I think this captures best what the real dependency in the hardware is, and it simplifies the logic a bit. Fixes: e0a25b6d1862 ("ASoC: atmel-classd: add the Audio Class D Amplifier") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- v2: rewrite the change completely, after running into a new regression. I'm putting it out on the list so we can review the change together, but I'm still doing more testing at the same time. If I don't reply by Dec 6, nothing new has come up. --- sound/soc/atmel/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 4a56f3dfba51..af9a9096d50b 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -20,8 +20,8 @@ config SND_ATMEL_SOC_SSC_PDC config SND_ATMEL_SOC_DMA tristate select SND_SOC_GENERIC_DMAENGINE_PCM - default m if SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=m - default y if SND_ATMEL_SOC_SSC_DMA=y || (SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=y) + default y if SND_ATMEL_SOC_SSC=y && (SND_ATMEL_SOC_SSC_DMA=m || SND_ATMEL_SOC_CLASSD=m) + default SND_ATMEL_SOC_CLASSD || SND_ATMEL_SOC_SSC_DMA config SND_ATMEL_SOC_SSC_DMA tristate @@ -64,7 +64,6 @@ config SND_AT91_SOC_SAM9X5_WM8731 config SND_ATMEL_SOC_CLASSD tristate "Atmel ASoC driver for boards using CLASSD" depends on ARCH_AT91 || COMPILE_TEST - select SND_ATMEL_SOC_DMA select REGMAP_MMIO help Say Y if you want to add support for Atmel ASoC driver for boards using -- 2.9.0

2 1

Re: [alsa-devel] [PATCH 5/8] ASoC: uniphier: add support for UniPhier AIO driver
by Mark Brown 05 Dec '17

05 Dec '17

On Tue, Dec 05, 2017 at 01:48:39PM +0900, Katsuhiro Suzuki wrote: Please fix your mail client to word wrap within paragraphs at something substantially less than 80 columns. Doing this makes your messages much easier to read and reply to. > > Is there a mux in the SoC here? > Sorry for confusing, It's not mux. > uniphier_srcport_reset() resets HW SRC (sampling rate converter) block. > Audio data out ports of UniPhier audio system have HW SRC. Is the SRC just a single block sitting between the DMA and the external audio port or is there more going on? Some of the other code made me think the hardware was more flexible than this (all the writing to registers with names like RXSEL for example). > > > +#endif /* CONFIG_SND_SOC_UNIPHIER_LD11 */ > > Why is there an ifdef here? There's no other conditional code in here, > > it seems pointless. > This config is used to support or not LD11 SoC. > aio-ld11.c is not build and 'uniphier_aio_ldxx_spec' is undefined if this config is disabled. > > aio-ld11.c defines SoC dependent resources (port, HW ring buffer, DMA ch, etc.) > and fixed settings. > I know it's better to move such information into device-tree, but register areas of > UniPhier's audio system is very strange and interleaved. It's hard to split each nodes... I'd expect this code to be structured more like a library - have a driver that handles the specific IPs then have it call into a shared block of code that does the generic bits. Though in this case the device specific bit looks like a couple of tiny data tables so I'm not sure it's worth making it conditional or separate at all. > > This looks awfully like compressed audio support... should there be > > integration with the compressed audio API/ > Thanks, I'll try it. Is there Documentation in sound/designes/compress-offload.rst? > And best sample is... Intel's driver? Yes. > (Summary) > I think I should fix as follows: > - Split DMA, DAI patches from large one > - Validate parameters in hw_params > - Add description about HW SRC (or fix bad name 'srcport') > - Add comments about uniphier_aiodma_irq() > - Expose clocking and audio routing to userspace, or at the very > least machine driver configuration > - Support compress-audio API for S/PDIF > and post V2. At least. I do think we need to get to the bottom of how flexible the hardware is first though.

1 0

[alsa-devel] [alsa-lib][PATCH 2/4] pcm: add and describe SND_PCM_FORMAT_{S, U}20
by Maciej S. Szmigiero 05 Dec '17

05 Dec '17

This patch adds and describes in various functions that query format properties SND_PCM_FORMAT_{S,U}20 formats that were recently added to the kernel as SNDRV_PCM_FORMAT_{S,U}20. These formats are similar to existing 20-bit PCM formats SND_PCM_FORMAT_{S,U}20_3, however they occupy 4 bytes instead of 3. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- include/pcm.h | 20 ++++++++++++++++++-- src/pcm/pcm.c | 10 ++++++++++ src/pcm/pcm_local.h | 4 ++++ src/pcm/pcm_misc.c | 41 ++++++++++++++++++++++++++++++++++++++--- 4 files changed, 70 insertions(+), 5 deletions(-) diff --git a/include/pcm.h b/include/pcm.h index e05777a7c221..5939c1dab37d 100644 --- a/include/pcm.h +++ b/include/pcm.h @@ -175,6 +175,14 @@ typedef enum _snd_pcm_format { SND_PCM_FORMAT_MPEG, /** GSM */ SND_PCM_FORMAT_GSM, + /** Signed 20bit Little Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_S20_LE, + /** Signed 20bit Big Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_S20_BE, + /** Unsigned 20bit Little Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_U20_LE, + /** Unsigned 20bit Big Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_U20_BE, /** Special */ SND_PCM_FORMAT_SPECIAL = 31, /** Signed 24bit Little Endian in 3bytes format */ @@ -239,7 +247,11 @@ typedef enum _snd_pcm_format { /** Float 64 bit CPU endian */ SND_PCM_FORMAT_FLOAT64 = SND_PCM_FORMAT_FLOAT64_LE, /** IEC-958 CPU Endian */ - SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_LE + SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_LE, + /** Signed 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_S20 = SND_PCM_FORMAT_S20_LE, + /** Unsigned 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_U20 = SND_PCM_FORMAT_U20_LE #elif __BYTE_ORDER == __BIG_ENDIAN /** Signed 16 bit CPU endian */ SND_PCM_FORMAT_S16 = SND_PCM_FORMAT_S16_BE, @@ -258,7 +270,11 @@ typedef enum _snd_pcm_format { /** Float 64 bit CPU endian */ SND_PCM_FORMAT_FLOAT64 = SND_PCM_FORMAT_FLOAT64_BE, /** IEC-958 CPU Endian */ - SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_BE + SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_BE, + /** Signed 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_S20 = SND_PCM_FORMAT_S20_BE, + /** Unsigned 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_U20 = SND_PCM_FORMAT_U20_BE #else #error "Unknown endian" #endif diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 1efb8b9d4e8c..e9ebf383c31b 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -1780,6 +1780,10 @@ static const char *const snd_pcm_format_names[] = { FORMAT(IMA_ADPCM), FORMAT(MPEG), FORMAT(GSM), + FORMAT(S20_LE), + FORMAT(S20_BE), + FORMAT(U20_LE), + FORMAT(U20_BE), FORMAT(SPECIAL), FORMAT(S24_3LE), FORMAT(S24_3BE), @@ -1814,6 +1818,8 @@ static const char *const snd_pcm_format_aliases[SND_PCM_FORMAT_LAST+1] = { FORMAT(FLOAT), FORMAT(FLOAT64), FORMAT(IEC958_SUBFRAME), + FORMAT(S20), + FORMAT(U20), }; static const char *const snd_pcm_format_descriptions[] = { @@ -1842,6 +1848,10 @@ static const char *const snd_pcm_format_descriptions[] = { FORMATD(IMA_ADPCM, "Ima-ADPCM"), FORMATD(MPEG, "MPEG"), FORMATD(GSM, "GSM"), + FORMATD(S20_LE, "Signed 20 bit Little Endian in 4 bytes, LSB justified"), + FORMATD(S20_BE, "Signed 20 bit Big Endian in 4 bytes, LSB justified"), + FORMATD(U20_LE, "Unsigned 20 bit Little Endian in 4 bytes, LSB justified"), + FORMATD(U20_BE, "Unsigned 20 bit Big Endian in 4 bytes, LSB justified"), FORMATD(SPECIAL, "Special"), FORMATD(S24_3LE, "Signed 24 bit Little Endian in 3bytes"), FORMATD(S24_3BE, "Signed 24 bit Big Endian in 3bytes"), diff --git a/src/pcm/pcm_local.h b/src/pcm/pcm_local.h index 776f8cd3e302..3d95e1749169 100644 --- a/src/pcm/pcm_local.h +++ b/src/pcm/pcm_local.h @@ -984,6 +984,10 @@ const snd_config_t *snd_pcm_rate_get_default_converter(snd_config_t *root); (1U << SND_PCM_FORMAT_S16_BE) | \ (1U << SND_PCM_FORMAT_U16_LE) | \ (1U << SND_PCM_FORMAT_U16_BE) | \ + (1U << SND_PCM_FORMAT_S20_LE) | \ + (1U << SND_PCM_FORMAT_S20_BE) | \ + (1U << SND_PCM_FORMAT_U20_LE) | \ + (1U << SND_PCM_FORMAT_U20_BE) | \ (1U << SND_PCM_FORMAT_S24_LE) | \ (1U << SND_PCM_FORMAT_S24_BE) | \ (1U << SND_PCM_FORMAT_U24_LE) | \ diff --git a/src/pcm/pcm_misc.c b/src/pcm/pcm_misc.c index 5420b1895713..7ee0dac771af 100644 --- a/src/pcm/pcm_misc.c +++ b/src/pcm/pcm_misc.c @@ -38,6 +38,8 @@ int snd_pcm_format_signed(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_S8: case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_S16_BE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_S32_LE: @@ -52,6 +54,8 @@ int snd_pcm_format_signed(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U8: case SNDRV_PCM_FORMAT_U16_LE: case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_U24_LE: case SNDRV_PCM_FORMAT_U24_BE: case SNDRV_PCM_FORMAT_U32_LE: @@ -126,6 +130,8 @@ int snd_pcm_format_little_endian(snd_pcm_format_t format) switch (format) { case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_U20_LE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_U24_LE: case SNDRV_PCM_FORMAT_S32_LE: @@ -144,6 +150,8 @@ int snd_pcm_format_little_endian(snd_pcm_format_t format) return 1; case SNDRV_PCM_FORMAT_S16_BE: case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_BE: case SNDRV_PCM_FORMAT_S32_BE: @@ -218,6 +226,10 @@ int snd_pcm_format_width(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U18_3LE: case SNDRV_PCM_FORMAT_U18_3BE: return 18; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S20_3LE: case SNDRV_PCM_FORMAT_S20_3BE: case SNDRV_PCM_FORMAT_U20_3LE: @@ -289,6 +301,10 @@ int snd_pcm_format_physical_width(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U24_3LE: case SNDRV_PCM_FORMAT_U24_3BE: return 24; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_LE: @@ -350,6 +366,10 @@ ssize_t snd_pcm_format_size(snd_pcm_format_t format, size_t samples) case SNDRV_PCM_FORMAT_U24_3LE: case SNDRV_PCM_FORMAT_U24_3BE: return samples * 3; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_LE: @@ -393,6 +413,8 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_S8: case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_S16_BE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_S32_LE: @@ -415,12 +437,16 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) #ifdef SNDRV_LITTLE_ENDIAN case SNDRV_PCM_FORMAT_U16_LE: return 0x8000800080008000ULL; + case SNDRV_PCM_FORMAT_U20_LE: + return 0x0008000000080000ULL; case SNDRV_PCM_FORMAT_U24_LE: return 0x0080000000800000ULL; case SNDRV_PCM_FORMAT_U32_LE: return 0x8000000080000000ULL; case SNDRV_PCM_FORMAT_U16_BE: return 0x0080008000800080ULL; + case SNDRV_PCM_FORMAT_U20_BE: + return 0x0000080000000800ULL; case SNDRV_PCM_FORMAT_U24_BE: return 0x0000800000008000ULL; case SNDRV_PCM_FORMAT_U32_BE: @@ -440,12 +466,16 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) #else case SNDRV_PCM_FORMAT_U16_LE: return 0x0080008000800080ULL; + case SNDRV_PCM_FORMAT_U20_LE: + return 0x0000080000000800ULL; case SNDRV_PCM_FORMAT_U24_LE: return 0x0000800000008000ULL; case SNDRV_PCM_FORMAT_U32_LE: return 0x0000008000000080ULL; case SNDRV_PCM_FORMAT_U16_BE: return 0x8000800080008000ULL; + case SNDRV_PCM_FORMAT_U20_BE: + return 0x0008000000080000ULL; case SNDRV_PCM_FORMAT_U24_BE: return 0x0080000000800000ULL; case SNDRV_PCM_FORMAT_U32_BE: @@ -653,11 +683,13 @@ int snd_pcm_format_set_silence(snd_pcm_format_t format, void *data, unsigned int return 0; } -static const int linear_formats[4][2][2] = { +static const int linear_formats[5][2][2] = { { { SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_S8 }, { SNDRV_PCM_FORMAT_U8, SNDRV_PCM_FORMAT_U8 } }, { { SNDRV_PCM_FORMAT_S16_LE, SNDRV_PCM_FORMAT_S16_BE }, { SNDRV_PCM_FORMAT_U16_LE, SNDRV_PCM_FORMAT_U16_BE } }, + { { SNDRV_PCM_FORMAT_S20_LE, SNDRV_PCM_FORMAT_S20_BE }, + { SNDRV_PCM_FORMAT_U20_LE, SNDRV_PCM_FORMAT_U20_BE } }, { { SNDRV_PCM_FORMAT_S24_LE, SNDRV_PCM_FORMAT_S24_BE }, { SNDRV_PCM_FORMAT_U24_LE, SNDRV_PCM_FORMAT_U24_BE } }, { { SNDRV_PCM_FORMAT_S32_LE, SNDRV_PCM_FORMAT_S32_BE }, @@ -706,12 +738,15 @@ snd_pcm_format_t snd_pcm_build_linear_format(int width, int pwidth, int unsignd, case 16: width = 1; break; - case 24: + case 20: width = 2; break; - case 32: + case 24: width = 3; break; + case 32: + width = 4; + break; default: return SND_PCM_FORMAT_UNKNOWN; }

2 1

[alsa-devel] usx2y: "should not be here with counts=40" then hard lockup (linux 4.9.0)
by Jaime T 05 Dec '17

05 Dec '17

Hi all. I'm running a fresh and cleanly-installed debian stable (stretch) with my tascam us-122. After several hours of perfect sound, the kernel (4.9.0-2-686) emits: Dec 4 22:30:20 piano kernel: [14707.140766] should not be here with counts=40 Dec 4 22:30:24 piano jackd[793]: ALSA: poll time out, polled for 3999073 usecs Dec 4 22:30:24 piano jackd[793]: JackAudioDriver::ProcessAsync: read error, stopping... and my jack server stops working, followed soon after by a hard lockup. I've run alsa-info.sh and the results are available at http://www.alsa-project.org/db/?f=e2385306145a37956360def8fe06e8c0f951839d Should I log a bug at https://bugzilla.kernel.org/ ? Many thanks, Jaime

1 0

[alsa-devel] New codec support for ALC257
by Kailang 05 Dec '17

05 Dec '17

Hi Takashi, This patch was support new codec for ALC257. BR, Kailang

2 1

[alsa-devel] [PATCH v6 00/13] Add STM32 DFSDM support
by Arnaud Pouliquen 04 Dec '17

04 Dec '17

Hello, Here is a new version to fix kbuild test warnings Main deltas V6 vs V5: - Fix warning reported by kbuild test in : include/linux/iio/consumer.h sound/soc/stm/stm32_adfsdm.c Main deltas V5 vs V4: - Integrate ASOC DAI as a subnode of the DFSDM. - Add in kernel consumer interface to allow to manipulate attribute. Context reminder: ----------------- DFSDM peripheral is a peripheral that allows to connect some sigma delta ADCs or PDM microphones via a SPI or Manchester bus. DFSDM integrates digital filters to offer up to 24 bits final resolution. In term of SW architecture. 2 use-cases have to be supported: 1) Sigma delta ADC conversion through IIO framework. Sigma delta ADC is handled by generic sigma delta modulator driver. DFSDM peripheral is binded to a SD modulator ADC using the IIO HW consumer interface. Please notice that IIO HW consumer interface has be proposed by Lars, but is part of this patchset with Lars's agreement. User interface is IIO one. Notice that this patch-set propose only a raw conversion, to simplify review. Buffer and trigger management will be added in next patch-sets. 2) PDM microphone record through ALSA framework. PDM microphone is handled by ASOC Generic DMIC codec driver. ADFSDM ASOC DAI driver is binded to IIO driver using the IIO consumer interface ADFSDM ASOC DAI driver is binded to a PDM microphone ASOC component using ASOC Of_graph. User interface is ALSA one. As IIO DMA management is not adapted to an audio realtime stream. A specific DMA management has been implemented in IIO driver for audio purposes. Regards, Arnaud Arnaud Pouliquen (12): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: inkern: API for manipulating channel attributes IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 127 ++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 62 + Documentation/driver-api/iio/hw-consumer.rst | 51 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 81 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1232 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 318 +++++ drivers/iio/adc/stm32-dfsdm.h | 319 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 248 ++++ drivers/iio/inkern.c | 18 +- include/linux/iio/adc/stm32-dfsdm-adc.h | 28 + include/linux/iio/consumer.h | 39 +- include/linux/iio/hw-consumer.h | 22 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 386 ++++++ 23 files changed, 3031 insertions(+), 6 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

4 25