[alsa-devel] [PATCH v4 0/7] ASoC: Intel: Skylake: Add a clk driver to enable ssp clks early
For certain platforms, clocks (mclk/sclk/fs) are required to be up before the stream start. Example: some codecs needs the mclk/sclk/fs to be enabled early for a successful clock synchronization. Some platforms require clock to be enabled at boot and be always ON.
By sending set_dma_control IPC (with the i2s blobs queried from NHLT), these clocks can be enabled early after the firmware is downloaded.
With this series, a virtual clock driver is created which provides interface to send the required IPCs from machine driver to enable the clocks. NHLT is parsed during probe and the clock information is populated. The pointer to blob is cached and sent along with the set_dma_control IPC structure during the clk prepare/unprepare callback. Clocks are created for a ssp if the nhlt table has endpoint configuration for that particular ssp. Skylake driver creates a platform driver with the clock information and register the clk ops callback.
Kabylake machine driver uses the clock interface to enable the clocks early as it is required by the rt5663 driver for clock synchronization.
v3 -> v4 - Add missing signed-offs
v2 -> v3 - Moved the clk ops and IPCs from Skylake driver to clk driver and reordered commits accordingly
- Add the support for extended I2S blob config which supports multiple mclk dividers in NHLT
- Enable the clocks as well in DAPM PMU event instead of hw_params in machine drivers as confirmed by codec vendor
- Do not register the clk if there is no valid clock source is avail in the I2S blob
- Take care of error return in the clk driver
- Address rest of the review comments and more optimization added
- Fix the warning sound/soc/intel/skylake/skl.c:724:1-3: WARNING: PTR_ERR_OR_ZERO can be used reported by scripts/coccinelle/api/ptr_ret.cocci
- Modified DSP replies as human readable to ease the debugging
- Add firmware replies for MCLK/SCLK clocks if they are running already
v1 -> v2 - Register parent clocks with skylake device. With the patch "clk: Add support for runtime PM" soon to be merged will help DSP to stay active on call to clock enable. Reference: (https://patchwork.kernel.org/patch/9911741/)
- Fix the machine driver to enable clocks early for headphone playback path as well to fix a pop noise issue
Harsha Priya (1): ASoC: Intel: kbl: Enable mclk and ssp sclk early
Naveen M (1): ASoC: Intel: eve: Enable mclk and ssp sclk early
Sriram Periyasamy (3): ASoC: Intel: Skylake: Parse nhlt and register clock device ASoC: Intel: Skylake: Add ssp clock driver ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driver
Subhransu S. Prusty (2): ASoC: Intel: Skylake: Make DSP replies more human readable ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC
sound/soc/intel/Kconfig | 3 + sound/soc/intel/boards/Kconfig | 2 + sound/soc/intel/boards/kbl_rt5663_max98927.c | 101 ++++- .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 100 +++++ sound/soc/intel/skylake/Makefile | 5 + sound/soc/intel/skylake/skl-i2s.h | 95 +++++ sound/soc/intel/skylake/skl-messages.c | 1 + sound/soc/intel/skylake/skl-nhlt.c | 172 ++++++++ sound/soc/intel/skylake/skl-ssp-clk.c | 470 +++++++++++++++++++++ sound/soc/intel/skylake/skl-ssp-clk.h | 117 +++++ sound/soc/intel/skylake/skl-sst-ipc.c | 50 ++- sound/soc/intel/skylake/skl.c | 93 ++++ sound/soc/intel/skylake/skl.h | 10 + 13 files changed, 1207 insertions(+), 12 deletions(-) create mode 100644 sound/soc/intel/skylake/skl-i2s.h create mode 100644 sound/soc/intel/skylake/skl-ssp-clk.c create mode 100644 sound/soc/intel/skylake/skl-ssp-clk.h
When NHLT endpoint is present for a SSP then we create clock for that SSP.
MCLK is consistent across endpoints and configuration for an SSP, so query only for first endpoint for an SSP.
For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which matches the clock rate requested. Best fit is decided based on below:
1. If rate matches with multiple configurations, then the first configuration is selected.
2. If for a selected fs and bits_per_sample, there are multiple endpoint configuration match, then the configuration with max number of channels is selected. So, the user has to set the rate which fits max number of channels
So we create a platform device and pass clock information parsed as platform data.
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Jaikrishna Nemallapudi jaikrishnax.nemallapudi@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com --- sound/soc/intel/skylake/skl-i2s.h | 64 ++++++++++++++ sound/soc/intel/skylake/skl-nhlt.c | 155 ++++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-ssp-clk.h | 79 +++++++++++++++++ sound/soc/intel/skylake/skl.c | 93 ++++++++++++++++++++ sound/soc/intel/skylake/skl.h | 4 + 5 files changed, 395 insertions(+) create mode 100644 sound/soc/intel/skylake/skl-i2s.h create mode 100644 sound/soc/intel/skylake/skl-ssp-clk.h
diff --git a/sound/soc/intel/skylake/skl-i2s.h b/sound/soc/intel/skylake/skl-i2s.h new file mode 100644 index 0000000..dcf819b --- /dev/null +++ b/sound/soc/intel/skylake/skl-i2s.h @@ -0,0 +1,64 @@ +/* + * skl-i2s.h - i2s blob mapping + * + * Copyright (C) 2017 Intel Corp + * Author: Subhransu S. Prusty < subhransu.s.prusty@intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#ifndef __SOUND_SOC_SKL_I2S_H +#define __SOUND_SOC_SKL_I2S_H + +#define SKL_I2S_MAX_TIME_SLOTS 8 +#define SKL_MCLK_DIV_CLK_SRC_MASK GENMASK(17, 16) + +#define SKL_MNDSS_DIV_CLK_SRC_MASK GENMASK(21, 20) +#define SKL_SHIFT(x) (ffs(x) - 1) +#define SKL_MCLK_DIV_RATIO_MASK GENMASK(11, 0) + +struct skl_i2s_config { + u32 ssc0; + u32 ssc1; + u32 sscto; + u32 sspsp; + u32 sstsa; + u32 ssrsa; + u32 ssc2; + u32 sspsp2; + u32 ssc3; + u32 ssioc; +} __packed; + +struct skl_i2s_config_mclk { + u32 mdivctrl; + u32 mdivr; +}; + +/** + * struct skl_i2s_config_blob_legacy - Structure defines I2S Gateway + * configuration legacy blob + * + * @gtw_attr: Gateway attribute for the I2S Gateway + * @tdm_ts_group: TDM slot mapping against channels in the Gateway. + * @i2s_cfg: I2S HW registers + * @mclk: MCLK clock source and divider values + */ +struct skl_i2s_config_blob_legacy { + u32 gtw_attr; + u32 tdm_ts_group[SKL_I2S_MAX_TIME_SLOTS]; + struct skl_i2s_config i2s_cfg; + struct skl_i2s_config_mclk mclk; +}; + +#endif /* __SOUND_SOC_SKL_I2S_H */ diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index e7d766d..4d2136c 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -19,6 +19,7 @@ */ #include <linux/pci.h> #include "skl.h" +#include "skl-i2s.h"
/* Unique identification for getting NHLT blobs */ static guid_t osc_guid = @@ -262,3 +263,157 @@ void skl_nhlt_remove_sysfs(struct skl *skl)
sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); } + +/* + * Queries NHLT for all the fmt configuration for a particular endpoint and + * stores all possible rates supported in a rate table for the corresponding + * sclk/sclkfs. + */ +void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, + struct nhlt_fmt *fmt, u8 id) +{ + struct skl_i2s_config_blob_legacy *i2s_config; + struct skl_clk_parent_src *parent; + struct skl_ssp_clk *sclk, *sclkfs; + struct nhlt_fmt_cfg *fmt_cfg; + struct wav_fmt_ext *wav_fmt; + unsigned long rate = 0; + bool present = false; + int rate_index = 0; + u16 channels, bps; + u8 clk_src; + int i, j; + u32 fs; + + sclk = &ssp_clks[SKL_SCLK_OFS]; + sclkfs = &ssp_clks[SKL_SCLKFS_OFS]; + + if (fmt->fmt_count == 0) + return; + + for (i = 0; i < fmt->fmt_count; i++) { + fmt_cfg = &fmt->fmt_config[i]; + wav_fmt = &fmt_cfg->fmt_ext; + + channels = wav_fmt->fmt.channels; + bps = wav_fmt->fmt.bits_per_sample; + fs = wav_fmt->fmt.samples_per_sec; + + /* + * In case of TDM configuration on a ssp, there can + * be more than one blob in which channel masks are + * different for each usecase for a specific rate and bps. + * But the sclk rate will be generated for the total + * number of channels used for that endpoint. + * + * So for the given fs and bps, choose blob which has + * the superset of all channels for that endpoint and + * derive the rate. + */ + for (j = i; j < fmt->fmt_count; j++) { + fmt_cfg = &fmt->fmt_config[j]; + wav_fmt = &fmt_cfg->fmt_ext; + if ((fs == wav_fmt->fmt.samples_per_sec) && + (bps == wav_fmt->fmt.bits_per_sample)) + channels = max_t(u16, channels, + wav_fmt->fmt.channels); + } + + rate = channels * bps * fs; + + /* check if the rate is added already to the given SSP's sclk */ + for (j = 0; (sclk[id].rate_cfg[j].rate != 0) && + (j < SKL_MAX_CLK_RATES); j++) { + if (sclk[id].rate_cfg[j].rate == rate) { + present = true; + break; + } + } + + /* Fill rate and parent for sclk/sclkfs */ + if (!present) { + /* MCLK Divider Source Select */ + i2s_config = (struct skl_i2s_config_blob_legacy *) + fmt->fmt_config[0].config.caps; + clk_src = ((i2s_config->mclk.mdivctrl) + & SKL_MNDSS_DIV_CLK_SRC_MASK) >> + SKL_SHIFT(SKL_MNDSS_DIV_CLK_SRC_MASK); + + parent = skl_get_parent_clk(clk_src); + + /* + * Do not copy the config data if there is no parent + * clock available for this clock source select + */ + if (!parent) + continue; + + sclk[id].rate_cfg[rate_index].rate = rate; + sclk[id].rate_cfg[rate_index].config = fmt_cfg; + sclkfs[id].rate_cfg[rate_index].rate = rate; + sclkfs[id].rate_cfg[rate_index].config = fmt_cfg; + sclk[id].parent_name = parent->name; + sclkfs[id].parent_name = parent->name; + + rate_index++; + } + } +} + +void skl_get_mclk(struct skl *skl, struct skl_ssp_clk *mclk, + struct nhlt_fmt *fmt, u8 id) +{ + struct skl_i2s_config_blob_legacy *i2s_config; + struct nhlt_specific_cfg *fmt_cfg; + struct skl_clk_parent_src *parent; + u32 clkdiv, div_ratio; + u8 clk_src; + + fmt_cfg = &fmt->fmt_config[0].config; + i2s_config = (struct skl_i2s_config_blob_legacy *)fmt_cfg->caps; + + /* MCLK Divider Source Select */ + clk_src = ((i2s_config->mclk.mdivctrl) & SKL_MCLK_DIV_CLK_SRC_MASK) >> + SKL_SHIFT(SKL_MCLK_DIV_CLK_SRC_MASK); + + clkdiv = i2s_config->mclk.mdivr & SKL_MCLK_DIV_RATIO_MASK; + + /* bypass divider */ + div_ratio = 1; + + if (clkdiv != SKL_MCLK_DIV_RATIO_MASK) + /* Divider is 2 + clkdiv */ + div_ratio = clkdiv + 2; + + /* Calculate MCLK rate from source using div value */ + parent = skl_get_parent_clk(clk_src); + if (!parent) + return; + + mclk[id].rate_cfg[0].rate = parent->rate/div_ratio; + mclk[id].rate_cfg[0].config = &fmt->fmt_config[0]; + mclk[id].parent_name = parent->name; +} + +void skl_get_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks) +{ + struct nhlt_acpi_table *nhlt = (struct nhlt_acpi_table *)skl->nhlt; + struct nhlt_endpoint *epnt; + struct nhlt_fmt *fmt; + int i; + u8 id; + + epnt = (struct nhlt_endpoint *)nhlt->desc; + for (i = 0; i < nhlt->endpoint_count; i++) { + if (epnt->linktype == NHLT_LINK_SSP) { + id = epnt->virtual_bus_id; + + fmt = (struct nhlt_fmt *)(epnt->config.caps + + epnt->config.size); + + skl_get_ssp_clks(skl, ssp_clks, fmt, id); + skl_get_mclk(skl, ssp_clks, fmt, id); + } + epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); + } +} diff --git a/sound/soc/intel/skylake/skl-ssp-clk.h b/sound/soc/intel/skylake/skl-ssp-clk.h new file mode 100644 index 0000000..c9ea840 --- /dev/null +++ b/sound/soc/intel/skylake/skl-ssp-clk.h @@ -0,0 +1,79 @@ +/* + * skl-ssp-clk.h - Skylake ssp clock information and ipc structure + * + * Copyright (C) 2017 Intel Corp + * Author: Jaikrishna Nemallapudi jaikrishnax.nemallapudi@intel.com + * Author: Subhransu S. Prusty subhransu.s.prusty@intel.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#ifndef SOUND_SOC_SKL_SSP_CLK_H +#define SOUND_SOC_SKL_SSP_CLK_H + +#define SKL_MAX_SSP 6 +/* xtal/cardinal/pll, parent of ssp clocks and mclk */ +#define SKL_MAX_CLK_SRC 3 +#define SKL_MAX_SSP_CLK_TYPES 3 /* mclk, sclk, sclkfs */ + +#define SKL_MAX_CLK_CNT (SKL_MAX_SSP * SKL_MAX_SSP_CLK_TYPES) + +/* Max number of configurations supported for each clock */ +#define SKL_MAX_CLK_RATES 10 + +#define SKL_SCLK_OFS SKL_MAX_SSP +#define SKL_SCLKFS_OFS (SKL_SCLK_OFS + SKL_MAX_SSP) + +enum skl_clk_type { + SKL_MCLK, + SKL_SCLK, + SKL_SCLK_FS, +}; + +enum skl_clk_src_type { + SKL_XTAL, + SKL_CARDINAL, + SKL_PLL, +}; + +struct skl_clk_parent_src { + u8 clk_id; + const char *name; + unsigned long rate; + const char *parent_name; +}; + +struct skl_clk_rate_cfg_table { + unsigned long rate; + void *config; +}; + +/* + * rate for mclk will be in rates[0]. For sclk and sclkfs, rates[] store + * all possible clocks ssp can generate for that platform. + */ +struct skl_ssp_clk { + const char *name; + const char *parent_name; + struct skl_clk_rate_cfg_table rate_cfg[SKL_MAX_CLK_RATES]; +}; + +struct skl_clk_pdata { + struct skl_clk_parent_src *parent_clks; + int num_clks; + struct skl_ssp_clk *ssp_clks; + void *pvt_data; +}; + +#endif /* SOUND_SOC_SKL_SSP_CLK_H */ diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index acb0ab4..63e5456 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -436,6 +436,23 @@ static int skl_free(struct hdac_ext_bus *ebus) return 0; }
+/* + * For each ssp there are 3 clocks (mclk/sclk/sclkfs). + * e.g. for ssp0, clocks will be named as + * "ssp0_mclk", "ssp0_sclk", "ssp0_sclkfs" + * So for skl+, there are 6 ssps, so 18 clocks will be created. + */ +static struct skl_ssp_clk skl_ssp_clks[] = { + {.name = "ssp0_mclk"}, {.name = "ssp1_mclk"}, {.name = "ssp2_mclk"}, + {.name = "ssp3_mclk"}, {.name = "ssp4_mclk"}, {.name = "ssp5_mclk"}, + {.name = "ssp0_sclk"}, {.name = "ssp1_sclk"}, {.name = "ssp2_sclk"}, + {.name = "ssp3_sclk"}, {.name = "ssp4_sclk"}, {.name = "ssp5_sclk"}, + {.name = "ssp0_sclkfs"}, {.name = "ssp1_sclkfs"}, + {.name = "ssp2_sclkfs"}, + {.name = "ssp3_sclkfs"}, {.name = "ssp4_sclkfs"}, + {.name = "ssp5_sclkfs"}, +}; + static int skl_machine_device_register(struct skl *skl, void *driver_data) { struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); @@ -510,6 +527,74 @@ static void skl_dmic_device_unregister(struct skl *skl) platform_device_unregister(skl->dmic_dev); }
+static struct skl_clk_parent_src skl_clk_src[] = { + { .clk_id = SKL_XTAL, .name = "xtal" }, + { .clk_id = SKL_CARDINAL, .name = "cardinal", .rate = 24576000 }, + { .clk_id = SKL_PLL, .name = "pll", .rate = 96000000 }, +}; + +struct skl_clk_parent_src *skl_get_parent_clk(u8 clk_id) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(skl_clk_src); i++) { + if (skl_clk_src[i].clk_id == clk_id) + return &skl_clk_src[i]; + } + + return NULL; +} + +void init_skl_xtal_rate(int pci_id) +{ + switch (pci_id) { + case 0x9d70: + case 0x9d71: + skl_clk_src[0].rate = 24000000; + return; + + default: + skl_clk_src[0].rate = 19200000; + return; + } +} + +static int skl_clock_device_register(struct skl *skl) +{ + struct platform_device_info pdevinfo = {NULL}; + struct skl_clk_pdata *clk_pdata; + + clk_pdata = devm_kzalloc(&skl->pci->dev, sizeof(*clk_pdata), + GFP_KERNEL); + if (!clk_pdata) + return -ENOMEM; + + init_skl_xtal_rate(skl->pci->device); + + clk_pdata->parent_clks = skl_clk_src; + clk_pdata->ssp_clks = skl_ssp_clks; + clk_pdata->num_clks = ARRAY_SIZE(skl_ssp_clks); + + /* Query NHLT to fill the rates and parent */ + skl_get_clks(skl, clk_pdata->ssp_clks); + clk_pdata->pvt_data = skl; + + /* Register Platform device */ + pdevinfo.parent = &skl->pci->dev; + pdevinfo.id = -1; + pdevinfo.name = "skl-ssp-clk"; + pdevinfo.data = clk_pdata; + pdevinfo.size_data = sizeof(*clk_pdata); + skl->clk_dev = platform_device_register_full(&pdevinfo); + return PTR_ERR_OR_ZERO(skl->clk_dev); +} + +static void skl_clock_device_unregister(struct skl *skl) +{ + if (skl->clk_dev) + platform_device_unregister(skl->clk_dev); +} + /* * Probe the given codec address */ @@ -792,6 +877,11 @@ static int skl_probe(struct pci_dev *pci,
/* check if dsp is there */ if (bus->ppcap) { + /* create device for dsp clk */ + err = skl_clock_device_register(skl); + if (err < 0) + goto out_clk_free; + err = skl_machine_device_register(skl, (void *)pci_id->driver_data); if (err < 0) @@ -823,6 +913,8 @@ static int skl_probe(struct pci_dev *pci, skl_free_dsp(skl); out_mach_free: skl_machine_device_unregister(skl); +out_clk_free: + skl_clock_device_unregister(skl); out_nhlt_free: skl_nhlt_free(skl->nhlt); out_free: @@ -873,6 +965,7 @@ static void skl_remove(struct pci_dev *pci) skl_free_dsp(skl); skl_machine_device_unregister(skl); skl_dmic_device_unregister(skl); + skl_clock_device_unregister(skl); skl_nhlt_remove_sysfs(skl); skl_nhlt_free(skl->nhlt); skl_free(ebus); diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index e00cde8..554ad6b 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -25,6 +25,7 @@ #include <sound/hdaudio_ext.h> #include <sound/soc.h> #include "skl-nhlt.h" +#include "skl-ssp-clk.h"
#define SKL_SUSPEND_DELAY 2000
@@ -52,6 +53,7 @@ struct skl { unsigned int init_done:1; /* delayed init status */ struct platform_device *dmic_dev; struct platform_device *i2s_dev; + struct platform_device *clk_dev; struct snd_soc_platform *platform; struct snd_soc_dai_driver *dais;
@@ -125,6 +127,8 @@ const struct skl_dsp_ops *skl_get_dsp_ops(int pci_id); void skl_update_d0i3c(struct device *dev, bool enable); int skl_nhlt_create_sysfs(struct skl *skl); void skl_nhlt_remove_sysfs(struct skl *skl); +void skl_get_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks); +struct skl_clk_parent_src *skl_get_parent_clk(u8 clk_id);
struct skl_module_cfg;
For certain platforms, it is required to start the clocks (mclk/sclk/fs) before the stream start. Example: for few chrome systems, codec needs the mclk/sclk to be enabled early for a successful clock synchronization and for few IVI platforms, clock need to be enabled at boot and should be ON always.
Add the required structures and create set_dma_control ipc to enable or disable the clock. To enable sclk without fs, mclk ipc structure is used, else sclkfs ipc structure is used.
Clock prepare/unprepare are used to enable/disable the clock as the IPC will be sent in non-atomic context. The clk set_dma_control IPC structures are populated during the set_rate callback and IPC is sent to enable the clock during prepare callback.
This patch creates virtual clock driver, which allows the machine driver to use the clock interface to send IPCs to DSP to enable/disable the clocks.
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Jaikrishna Nemallapudi jaikrishnax.nemallapudi@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com --- sound/soc/intel/Kconfig | 3 + sound/soc/intel/skylake/Makefile | 5 + sound/soc/intel/skylake/skl-messages.c | 1 + sound/soc/intel/skylake/skl-ssp-clk.c | 470 +++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-ssp-clk.h | 38 +++ sound/soc/intel/skylake/skl.h | 6 + 6 files changed, 523 insertions(+) create mode 100644 sound/soc/intel/skylake/skl-ssp-clk.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index e181182..826a30f 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -53,6 +53,9 @@ config SND_SST_ATOM_HIFI2_PLATFORM depends on SND_SOC_INTEL_SST_TOPLEVEL && X86 select SND_SOC_COMPRESS
+config SND_SOC_INTEL_SKYLAKE_SSP_CLK + tristate + config SND_SOC_INTEL_SKYLAKE tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL" depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI diff --git a/sound/soc/intel/skylake/Makefile b/sound/soc/intel/skylake/Makefile index 3380deb..9131c35 100644 --- a/sound/soc/intel/skylake/Makefile +++ b/sound/soc/intel/skylake/Makefile @@ -13,3 +13,8 @@ snd-soc-skl-ipc-objs := skl-sst-ipc.o skl-sst-dsp.o cnl-sst-dsp.o \ skl-sst-utils.o
obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += snd-soc-skl-ipc.o + +#Skylake Clock device support +snd-soc-skl-ssp-clk-objs := skl-ssp-clk.o + +obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK) += snd-soc-skl-ssp-clk.o diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index f637829..e9fd352 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -653,6 +653,7 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, kfree(dma_ctrl); return err; } +EXPORT_SYMBOL_GPL(skl_dsp_set_dma_control);
static void skl_setup_out_format(struct skl_sst *ctx, struct skl_module_cfg *mconfig, diff --git a/sound/soc/intel/skylake/skl-ssp-clk.c b/sound/soc/intel/skylake/skl-ssp-clk.c new file mode 100644 index 0000000..856831d --- /dev/null +++ b/sound/soc/intel/skylake/skl-ssp-clk.c @@ -0,0 +1,470 @@ +/* + * skl-ssp-clk.c - ASoC skylake ssp clock driver + * + * Copyright (C) 2017 Intel Corp + * Author: Jaikrishna Nemallapudi jaikrishnax.nemallapudi@intel.com + * Author: Subhransu S. Prusty subhransu.s.prusty@intel.com + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include "skl.h" +#include "skl-ssp-clk.h" +#include "skl-topology.h" + +#define to_skl_clk(_hw) container_of(_hw, struct skl_clk, hw) + +struct skl_clk_parent { + struct clk_hw *hw; + struct clk_lookup *lookup; +}; + +struct skl_clk { + struct clk_hw hw; + struct clk_lookup *lookup; + unsigned long rate; + struct skl_clk_pdata *pdata; + u32 id; +}; + +struct skl_clk_data { + struct skl_clk_parent parent[SKL_MAX_CLK_SRC]; + struct skl_clk *clk[SKL_MAX_CLK_CNT]; + u8 avail_clk_cnt; +}; + +static int skl_get_clk_type(u32 index) +{ + switch (index) { + case 0 ... (SKL_SCLK_OFS - 1): + return SKL_MCLK; + + case SKL_SCLK_OFS ... (SKL_SCLKFS_OFS - 1): + return SKL_SCLK; + + case SKL_SCLKFS_OFS ... (SKL_MAX_CLK_CNT - 1): + return SKL_SCLK_FS; + + default: + return -EINVAL; + } +} + +static int skl_get_vbus_id(u32 index, u8 clk_type) +{ + switch (clk_type) { + case SKL_MCLK: + return index; + + case SKL_SCLK: + return index - SKL_SCLK_OFS; + + case SKL_SCLK_FS: + return index - SKL_SCLKFS_OFS; + + default: + return -EINVAL; + } +} + +static void skl_fill_clk_ipc(struct skl_clk_rate_cfg_table *rcfg, u8 clk_type) +{ + struct nhlt_fmt_cfg *fmt_cfg; + union skl_clk_ctrl_ipc *ipc; + struct wav_fmt *wfmt; + + if (!rcfg) + return; + + ipc = &rcfg->dma_ctl_ipc; + if (clk_type == SKL_SCLK_FS) { + fmt_cfg = (struct nhlt_fmt_cfg *)rcfg->config; + wfmt = &fmt_cfg->fmt_ext.fmt; + + /* Remove TLV Header size */ + ipc->sclk_fs.hdr.size = sizeof(struct skl_dmactrl_sclkfs_cfg) - + sizeof(struct skl_tlv_hdr); + ipc->sclk_fs.sampling_frequency = wfmt->samples_per_sec; + ipc->sclk_fs.bit_depth = wfmt->bits_per_sample; + ipc->sclk_fs.valid_bit_depth = + fmt_cfg->fmt_ext.sample.valid_bits_per_sample; + ipc->sclk_fs.number_of_channels = wfmt->channels; + } else { + ipc->mclk.hdr.type = DMA_CLK_CONTROLS; + /* Remove TLV Header size */ + ipc->mclk.hdr.size = sizeof(struct skl_dmactrl_mclk_cfg) - + sizeof(struct skl_tlv_hdr); + } +} + +/* Sends dma control IPC to turn the clock ON/OFF */ +static int skl_send_clk_dma_control(struct skl *skl, + struct skl_clk_rate_cfg_table *rcfg, + u32 vbus_id, u8 clk_type, + bool enable) +{ + struct nhlt_specific_cfg *sp_cfg; + u32 i2s_config_size, node_id = 0; + struct nhlt_fmt_cfg *fmt_cfg; + union skl_clk_ctrl_ipc *ipc; + void *i2s_config = NULL; + u8 *data, size; + int ret; + + if (!rcfg) + return -EIO; + + ipc = &rcfg->dma_ctl_ipc; + fmt_cfg = (struct nhlt_fmt_cfg *)rcfg->config; + sp_cfg = &fmt_cfg->config; + + if (clk_type == SKL_SCLK_FS) { + ipc->sclk_fs.hdr.type = + enable ? DMA_TRANSMITION_START : DMA_TRANSMITION_STOP; + data = (u8 *)&ipc->sclk_fs; + size = sizeof(struct skl_dmactrl_sclkfs_cfg); + } else { + /* 1 to enable mclk, 0 to enable sclk */ + if (clk_type == SKL_SCLK) + ipc->mclk.mclk = 0; + else + ipc->mclk.mclk = 1; + + ipc->mclk.keep_running = enable; + ipc->mclk.warm_up_over = enable; + ipc->mclk.clk_stop_over = !enable; + data = (u8 *)&ipc->mclk; + size = sizeof(struct skl_dmactrl_mclk_cfg); + } + + i2s_config_size = sp_cfg->size + size; + i2s_config = kzalloc(i2s_config_size, GFP_KERNEL); + if (!i2s_config) + return -ENOMEM; + + /* copy blob */ + memcpy(i2s_config, sp_cfg->caps, sp_cfg->size); + + /* copy additional dma controls information */ + memcpy(i2s_config + sp_cfg->size, data, size); + + node_id = ((SKL_DMA_I2S_LINK_INPUT_CLASS << 8) | (vbus_id << 4)); + ret = skl_dsp_set_dma_control(skl->skl_sst, (u32 *)i2s_config, + i2s_config_size, node_id); + kfree(i2s_config); + + return ret; +} + +static struct skl_clk_rate_cfg_table *skl_get_rate_cfg( + struct skl_clk_rate_cfg_table *rcfg, + unsigned long rate) +{ + int i; + + for (i = 0; (i < SKL_MAX_CLK_RATES) && rcfg[i].rate; i++) { + if (rcfg[i].rate == rate) + return &rcfg[i]; + } + + return NULL; +} + +static int skl_clk_change_status(struct skl_clk *clkdev, + bool enable) +{ + struct skl_clk_rate_cfg_table *rcfg; + int vbus_id, clk_type; + + clk_type = skl_get_clk_type(clkdev->id); + if (clk_type < 0) + return clk_type; + + vbus_id = skl_get_vbus_id(clkdev->id, clk_type); + if (vbus_id < 0) + return vbus_id; + + rcfg = skl_get_rate_cfg(clkdev->pdata->ssp_clks[clkdev->id].rate_cfg, + clkdev->rate); + if (!rcfg) + return -EINVAL; + + return skl_send_clk_dma_control(clkdev->pdata->pvt_data, rcfg, + vbus_id, clk_type, enable); +} + +static int skl_clk_prepare(struct clk_hw *hw) +{ + struct skl_clk *clkdev = to_skl_clk(hw); + + if (!clkdev) + return -ENODEV; + + return skl_clk_change_status(clkdev, true); +} + +static void skl_clk_unprepare(struct clk_hw *hw) +{ + struct skl_clk *clkdev = to_skl_clk(hw); + + if (!clkdev) + return; + + skl_clk_change_status(clkdev, false); +} + +static int skl_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct skl_clk *clkdev = to_skl_clk(hw); + struct skl_clk_rate_cfg_table *rcfg; + int clk_type; + + if (!clkdev) + return -ENODEV; + + if (!rate) + return -EINVAL; + + rcfg = skl_get_rate_cfg(clkdev->pdata->ssp_clks[clkdev->id].rate_cfg, + rate); + if (!rcfg) + return -EINVAL; + + clk_type = skl_get_clk_type(clkdev->id); + if (clk_type < 0) + return clk_type; + + skl_fill_clk_ipc(rcfg, clk_type); + clkdev->rate = rate; + + return 0; +} + +static unsigned long skl_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct skl_clk *clkdev = to_skl_clk(hw); + struct skl_clk_rate_cfg_table *rcfg; + int clk_type; + + if (!clkdev) + return 0; + + if (clkdev->rate) + return clkdev->rate; + + rcfg = skl_get_rate_cfg(clkdev->pdata->ssp_clks[clkdev->id].rate_cfg, + parent_rate); + if (!rcfg) + return 0; + + clk_type = skl_get_clk_type(clkdev->id); + if (clk_type < 0) + return 0; + + skl_fill_clk_ipc(rcfg, clk_type); + clkdev->rate = rcfg->rate; + + return clkdev->rate; +} + +/* Not supported by clk driver. Implemented to satisfy clk fw */ +long skl_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + return rate; +} + +/* + * prepare/unprepare are used instead of enable/disable as IPC will be sent + * in non-atomic context. + */ +static const struct clk_ops skl_clk_ops = { + .prepare = skl_clk_prepare, + .unprepare = skl_clk_unprepare, + .set_rate = skl_clk_set_rate, + .round_rate = skl_clk_round_rate, + .recalc_rate = skl_clk_recalc_rate, +}; + +static void unregister_parent_src_clk(struct skl_clk_parent *pclk, + unsigned int id) +{ + while (id--) { + clkdev_drop(pclk[id].lookup); + clk_hw_unregister_fixed_rate(pclk[id].hw); + } +} + +static void unregister_src_clk(struct skl_clk_data *dclk) +{ + u8 cnt = dclk->avail_clk_cnt; + + while (cnt--) + clkdev_drop(dclk->clk[cnt]->lookup); +} + +static int skl_register_parent_clks(struct device *dev, + struct skl_clk_parent *parent, + struct skl_clk_parent_src *pclk) +{ + int i, ret; + + for (i = 0; i < SKL_MAX_CLK_SRC; i++) { + + /* Register Parent clock */ + parent[i].hw = clk_hw_register_fixed_rate(dev, pclk[i].name, + pclk[i].parent_name, 0, pclk[i].rate); + if (IS_ERR(parent[i].hw)) { + ret = PTR_ERR(parent[i].hw); + goto err; + } + + parent[i].lookup = clkdev_hw_create(parent[i].hw, pclk[i].name, + NULL); + if (!parent[i].lookup) { + clk_hw_unregister_fixed_rate(parent[i].hw); + ret = -ENOMEM; + goto err; + } + } + + return 0; +err: + unregister_parent_src_clk(parent, i); + return ret; +} + +/* Assign fmt_config to clk_data */ +static struct skl_clk *register_skl_clk(struct device *dev, + struct skl_ssp_clk *clk, + struct skl_clk_pdata *clk_pdata, int id) +{ + struct clk_init_data init; + struct skl_clk *clkdev; + int ret; + + clkdev = devm_kzalloc(dev, sizeof(*clkdev), GFP_KERNEL); + if (!clkdev) + return ERR_PTR(-ENOMEM); + + init.name = clk->name; + init.ops = &skl_clk_ops; + init.flags = 0; + init.parent_names = &clk->parent_name; + init.num_parents = 1; + clkdev->hw.init = &init; + clkdev->pdata = clk_pdata; + + clkdev->id = id; + ret = devm_clk_hw_register(dev, &clkdev->hw); + if (ret) { + clkdev = ERR_PTR(ret); + return clkdev; + } + + clkdev->lookup = clkdev_hw_create(&clkdev->hw, init.name, NULL); + if (!clkdev->lookup) + clkdev = ERR_PTR(-ENOMEM); + + return clkdev; +} + +static int skl_clk_dev_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent_dev = dev->parent; + struct skl_clk_parent_src *parent_clks; + struct skl_clk_pdata *clk_pdata; + struct skl_clk_data *data; + struct skl_ssp_clk *clks; + int ret, i; + + clk_pdata = dev_get_platdata(&pdev->dev); + parent_clks = clk_pdata->parent_clks; + clks = clk_pdata->ssp_clks; + if (!parent_clks || !clks) + return -EIO; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Register Parent clock */ + ret = skl_register_parent_clks(parent_dev, data->parent, parent_clks); + if (ret < 0) + return ret; + + for (i = 0; i < clk_pdata->num_clks; i++) { + /* + * Only register valid clocks + * i.e. for which nhlt entry is present. + */ + if (clks[i].rate_cfg[0].rate == 0) + continue; + + data->clk[i] = register_skl_clk(dev, &clks[i], clk_pdata, i); + if (IS_ERR(data->clk[i])) { + ret = PTR_ERR(data->clk[i]); + goto err_unreg_skl_clk; + } + + data->avail_clk_cnt++; + } + + platform_set_drvdata(pdev, data); + + return 0; + +err_unreg_skl_clk: + unregister_src_clk(data); + unregister_parent_src_clk(data->parent, SKL_MAX_CLK_SRC); + + return ret; +} + +static int skl_clk_dev_remove(struct platform_device *pdev) +{ + struct skl_clk_data *data; + + data = platform_get_drvdata(pdev); + unregister_src_clk(data); + unregister_parent_src_clk(data->parent, SKL_MAX_CLK_SRC); + + return 0; +} + +static struct platform_driver skl_clk_driver = { + .driver = { + .name = "skl-ssp-clk", + }, + .probe = skl_clk_dev_probe, + .remove = skl_clk_dev_remove, +}; + +module_platform_driver(skl_clk_driver); + +MODULE_DESCRIPTION("Skylake clock driver"); +MODULE_AUTHOR("Jaikrishna Nemallapudi jaikrishnax.nemallapudi@intel.com"); +MODULE_AUTHOR("Subhransu S. Prusty subhransu.s.prusty@intel.com"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:skl-ssp-clk"); diff --git a/sound/soc/intel/skylake/skl-ssp-clk.h b/sound/soc/intel/skylake/skl-ssp-clk.h index c9ea840..d1be50f 100644 --- a/sound/soc/intel/skylake/skl-ssp-clk.h +++ b/sound/soc/intel/skylake/skl-ssp-clk.h @@ -54,8 +54,46 @@ struct skl_clk_parent_src { const char *parent_name; };
+struct skl_tlv_hdr { + u32 type; + u32 size; +}; + +struct skl_dmactrl_mclk_cfg { + struct skl_tlv_hdr hdr; + /* DMA Clk TLV params */ + u32 clk_warm_up:16; + u32 mclk:1; + u32 warm_up_over:1; + u32 rsvd0:14; + u32 clk_stop_delay:16; + u32 keep_running:1; + u32 clk_stop_over:1; + u32 rsvd1:14; +}; + +struct skl_dmactrl_sclkfs_cfg { + struct skl_tlv_hdr hdr; + /* DMA SClk&FS TLV params */ + u32 sampling_frequency; + u32 bit_depth; + u32 channel_map; + u32 channel_config; + u32 interleaving_style; + u32 number_of_channels : 8; + u32 valid_bit_depth : 8; + u32 sample_type : 8; + u32 reserved : 8; +}; + +union skl_clk_ctrl_ipc { + struct skl_dmactrl_mclk_cfg mclk; + struct skl_dmactrl_sclkfs_cfg sclk_fs; +}; + struct skl_clk_rate_cfg_table { unsigned long rate; + union skl_clk_ctrl_ipc dma_ctl_ipc; void *config; };
diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 554ad6b..e27dc7a 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -36,6 +36,10 @@ /* D0I3C Register fields */ #define AZX_REG_VS_D0I3C_CIP 0x1 /* Command in progress */ #define AZX_REG_VS_D0I3C_I3 0x4 /* D0i3 enable */ +#define SKL_MAX_DMACTRL_CFG 18 +#define DMA_CLK_CONTROLS 1 +#define DMA_TRANSMITION_START 2 +#define DMA_TRANSMITION_STOP 3
struct skl_dsp_resource { u32 max_mcps; @@ -129,6 +133,8 @@ int skl_nhlt_create_sysfs(struct skl *skl); void skl_nhlt_remove_sysfs(struct skl *skl); void skl_get_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks); struct skl_clk_parent_src *skl_get_parent_clk(u8 clk_id); +int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, + u32 caps_size, u32 node_id);
struct skl_module_cfg;
Extended I2S config blob supports multiple mclk dividers in NHLT blob. This patch detects whether the I2S blob is legacy or extended based on the signature value and chooses the mclk source and divider accordingly.
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com --- sound/soc/intel/skylake/skl-i2s.h | 31 ++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-nhlt.c | 41 +++++++++++++++++++++++++++----------- 2 files changed, 60 insertions(+), 12 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-i2s.h b/sound/soc/intel/skylake/skl-i2s.h index dcf819b..ad0a1bb 100644 --- a/sound/soc/intel/skylake/skl-i2s.h +++ b/sound/soc/intel/skylake/skl-i2s.h @@ -27,6 +27,12 @@ #define SKL_SHIFT(x) (ffs(x) - 1) #define SKL_MCLK_DIV_RATIO_MASK GENMASK(11, 0)
+#define is_legacy_blob(x) (x.signature != 0xEE) +#define ext_to_legacy_blob(i2s_config_blob_ext) \ + ((struct skl_i2s_config_blob_legacy *) i2s_config_blob_ext) + +#define get_clk_src(mclk, mask) \ + ((mclk.mdivctrl & mask) >> SKL_SHIFT(mask)) struct skl_i2s_config { u32 ssc0; u32 ssc1; @@ -45,6 +51,24 @@ struct skl_i2s_config_mclk { u32 mdivr; };
+struct skl_i2s_config_mclk_ext { + u32 mdivctrl; + u32 mdivr_count; + u32 mdivr[0]; +} __packed; + +struct skl_i2s_config_blob_signature { + u32 minor_ver : 8; + u32 major_ver : 8; + u32 resvdz : 8; + u32 signature : 8; +} __packed; + +struct skl_i2s_config_blob_header { + struct skl_i2s_config_blob_signature sig; + u32 size; +}; + /** * struct skl_i2s_config_blob_legacy - Structure defines I2S Gateway * configuration legacy blob @@ -61,4 +85,11 @@ struct skl_i2s_config_blob_legacy { struct skl_i2s_config_mclk mclk; };
+struct skl_i2s_config_blob_ext { + u32 gtw_attr; + struct skl_i2s_config_blob_header hdr; + u32 tdm_ts_group[SKL_I2S_MAX_TIME_SLOTS]; + struct skl_i2s_config i2s_cfg; + struct skl_i2s_config_mclk_ext mclk; +} __packed; #endif /* __SOUND_SOC_SKL_I2S_H */ diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index 4d2136c..c2dcce9 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -26,6 +26,7 @@ static guid_t osc_guid = GUID_INIT(0xA69F886E, 0x6CEB, 0x4594, 0xA4, 0x1F, 0x7B, 0x5D, 0xCE, 0x24, 0xC5, 0x53);
+ struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) { acpi_handle handle; @@ -272,6 +273,7 @@ void skl_nhlt_remove_sysfs(struct skl *skl) void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, struct nhlt_fmt *fmt, u8 id) { + struct skl_i2s_config_blob_ext *i2s_config_ext; struct skl_i2s_config_blob_legacy *i2s_config; struct skl_clk_parent_src *parent; struct skl_ssp_clk *sclk, *sclkfs; @@ -332,12 +334,18 @@ void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks,
/* Fill rate and parent for sclk/sclkfs */ if (!present) { - /* MCLK Divider Source Select */ - i2s_config = (struct skl_i2s_config_blob_legacy *) + i2s_config_ext = (struct skl_i2s_config_blob_ext *) fmt->fmt_config[0].config.caps; - clk_src = ((i2s_config->mclk.mdivctrl) - & SKL_MNDSS_DIV_CLK_SRC_MASK) >> - SKL_SHIFT(SKL_MNDSS_DIV_CLK_SRC_MASK); + + /* MCLK Divider Source Select */ + if (is_legacy_blob(i2s_config_ext->hdr.sig)) { + i2s_config = ext_to_legacy_blob(i2s_config_ext); + clk_src = get_clk_src(i2s_config->mclk, + SKL_MNDSS_DIV_CLK_SRC_MASK); + } else { + clk_src = get_clk_src(i2s_config_ext->mclk, + SKL_MNDSS_DIV_CLK_SRC_MASK); + }
parent = skl_get_parent_clk(clk_src);
@@ -363,6 +371,7 @@ void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, void skl_get_mclk(struct skl *skl, struct skl_ssp_clk *mclk, struct nhlt_fmt *fmt, u8 id) { + struct skl_i2s_config_blob_ext *i2s_config_ext; struct skl_i2s_config_blob_legacy *i2s_config; struct nhlt_specific_cfg *fmt_cfg; struct skl_clk_parent_src *parent; @@ -370,13 +379,21 @@ void skl_get_mclk(struct skl *skl, struct skl_ssp_clk *mclk, u8 clk_src;
fmt_cfg = &fmt->fmt_config[0].config; - i2s_config = (struct skl_i2s_config_blob_legacy *)fmt_cfg->caps; - - /* MCLK Divider Source Select */ - clk_src = ((i2s_config->mclk.mdivctrl) & SKL_MCLK_DIV_CLK_SRC_MASK) >> - SKL_SHIFT(SKL_MCLK_DIV_CLK_SRC_MASK); - - clkdiv = i2s_config->mclk.mdivr & SKL_MCLK_DIV_RATIO_MASK; + i2s_config_ext = (struct skl_i2s_config_blob_ext *)fmt_cfg->caps; + + /* MCLK Divider Source Select and divider */ + if (is_legacy_blob(i2s_config_ext->hdr.sig)) { + i2s_config = ext_to_legacy_blob(i2s_config_ext); + clk_src = get_clk_src(i2s_config->mclk, + SKL_MCLK_DIV_CLK_SRC_MASK); + clkdiv = i2s_config->mclk.mdivr & + SKL_MCLK_DIV_RATIO_MASK; + } else { + clk_src = get_clk_src(i2s_config_ext->mclk, + SKL_MCLK_DIV_CLK_SRC_MASK); + clkdiv = i2s_config_ext->mclk.mdivr[0] & + SKL_MCLK_DIV_RATIO_MASK; + }
/* bypass divider */ div_ratio = 1;
From: Harsha Priya harshapriya.n@intel.com
rt5663 needs mclk/sclk early to synchronize its internal clocks. Enable these clocks early.
Signed-off-by: Harsha Priya harshapriya.n@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com --- sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/kbl_rt5663_max98927.c | 101 ++++++++++++++++++++++++++- 2 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 449bc8b..f62f2ab 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -262,6 +262,7 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH select SND_SOC_MAX98927 select SND_SOC_DMIC select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_SKYLAKE_SSP_CLK help This adds support for ASoC Onboard Codec I2S machine driver. This will create an alsa sound card for RT5663 + MAX98927. diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 6f9a8bc..409c321 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -28,6 +28,9 @@ #include "../../codecs/rt5663.h" #include "../../codecs/hdac_hdmi.h" #include "../skylake/skl.h" +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h>
#define KBL_REALTEK_CODEC_DAI "rt5663-aif" #define KBL_MAXIM_CODEC_DAI "max98927-aif1" @@ -48,6 +51,8 @@ struct kbl_hdmi_pcm { struct kbl_rt5663_private { struct snd_soc_jack kabylake_headset; struct list_head hdmi_pcm_list; + struct clk *mclk; + struct clk *sclk; };
enum { @@ -69,6 +74,67 @@ static const struct snd_kcontrol_new kabylake_controls[] = { SOC_DAPM_PIN_SWITCH("Right Spk"), };
+static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct kbl_rt5663_private *priv = snd_soc_card_get_drvdata(card); + int ret = 0; + + /* + * MCLK/SCLK need to be ON early for a successful synchronization of + * codec internal clock. And the clocks are turned off during + * POST_PMD after the stream is stopped. + */ + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (__clk_is_enabled(priv->mclk)) + return 0; + + /* Enable MCLK */ + ret = clk_set_rate(priv->mclk, 24000000); + if (ret < 0) { + dev_err(card->dev, "Can't set rate for mclk, err: %d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, "Can't enable mclk, err: %d\n", ret); + return ret; + } + + /* Enable SCLK */ + ret = clk_set_rate(priv->sclk, 3072000); + if (ret < 0) { + dev_err(card->dev, "Can't set rate for sclk, err: %d\n", + ret); + clk_disable_unprepare(priv->mclk); + return ret; + } + + ret = clk_prepare_enable(priv->sclk); + if (ret < 0) { + dev_err(card->dev, "Can't enable sclk, err: %d\n", ret); + clk_disable_unprepare(priv->mclk); + } + break; + case SND_SOC_DAPM_POST_PMD: + if (!__clk_is_enabled(priv->mclk)) + return 0; + + clk_disable_unprepare(priv->mclk); + clk_disable_unprepare(priv->sclk); + break; + default: + return 0; + } + + return 0; +} + static const struct snd_soc_dapm_widget kabylake_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -78,11 +144,14 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = { SND_SOC_DAPM_SPK("HDMI1", NULL), SND_SOC_DAPM_SPK("HDMI2", NULL), SND_SOC_DAPM_SPK("HDMI3", NULL), - + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), };
static const struct snd_soc_dapm_route kabylake_map[] = { /* HP jack connectors - unknown if we have jack detection */ + { "Headphone Jack", NULL, "Platform Clock" }, { "Headphone Jack", NULL, "HPOL" }, { "Headphone Jack", NULL, "HPOR" },
@@ -91,6 +160,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = { { "Right Spk", NULL, "Right BE_OUT" },
/* other jacks */ + { "Headset Mic", NULL, "Platform Clock" }, { "IN1P", NULL, "Headset Mic" }, { "IN1N", NULL, "Headset Mic" }, { "DMic", NULL, "SoC DMIC" }, @@ -901,6 +971,7 @@ static int kabylake_audio_probe(struct platform_device *pdev) { struct kbl_rt5663_private *ctx; struct skl_machine_pdata *pdata; + int ret;
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC); if (!ctx) @@ -919,6 +990,34 @@ static int kabylake_audio_probe(struct platform_device *pdev) dmic_constraints = pdata->dmic_num == 2 ? &constraints_dmic_2ch : &constraints_dmic_channels;
+ ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk"); + if (IS_ERR(ctx->mclk)) { + ret = PTR_ERR(ctx->mclk); + if (ret == -ENOENT) { + dev_info(&pdev->dev, + "Failed to get ssp1_sclk, defer probe\n"); + return -EPROBE_DEFER; + } + + dev_err(&pdev->dev, "Failed to get ssp1_mclk with err:%d\n", + ret); + return ret; + } + + ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk"); + if (IS_ERR(ctx->sclk)) { + ret = PTR_ERR(ctx->sclk); + if (ret == -ENOENT) { + dev_info(&pdev->dev, + "Failed to get ssp1_sclk, defer probe\n"); + return -EPROBE_DEFER; + } + + dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n", + ret); + return ret; + } + return devm_snd_soc_register_card(&pdev->dev, kabylake_audio_card); }
On 11/22, Sriram Periyasamy wrote:
From: Harsha Priya harshapriya.n@intel.com
rt5663 needs mclk/sclk early to synchronize its internal clocks. Enable these clocks early.
Signed-off-by: Harsha Priya harshapriya.n@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com
sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/kbl_rt5663_max98927.c | 101 ++++++++++++++++++++++++++- 2 files changed, 101 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 449bc8b..f62f2ab 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -262,6 +262,7 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH select SND_SOC_MAX98927 select SND_SOC_DMIC select SND_SOC_HDAC_HDMI
- select SND_SOC_INTEL_SKYLAKE_SSP_CLK help This adds support for ASoC Onboard Codec I2S machine driver. This will create an alsa sound card for RT5663 + MAX98927.
diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 6f9a8bc..409c321 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -28,6 +28,9 @@ #include "../../codecs/rt5663.h" #include "../../codecs/hdac_hdmi.h" #include "../skylake/skl.h" +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h>
#define KBL_REALTEK_CODEC_DAI "rt5663-aif" #define KBL_MAXIM_CODEC_DAI "max98927-aif1" @@ -48,6 +51,8 @@ struct kbl_hdmi_pcm { struct kbl_rt5663_private { struct snd_soc_jack kabylake_headset; struct list_head hdmi_pcm_list;
- struct clk *mclk;
- struct clk *sclk;
};
enum { @@ -69,6 +74,67 @@ static const struct snd_kcontrol_new kabylake_controls[] = { SOC_DAPM_PIN_SWITCH("Right Spk"), };
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)+{
- struct snd_soc_dapm_context *dapm = w->dapm;
- struct snd_soc_card *card = dapm->card;
- struct kbl_rt5663_private *priv = snd_soc_card_get_drvdata(card);
- int ret = 0;
- /*
* MCLK/SCLK need to be ON early for a successful synchronization of* codec internal clock. And the clocks are turned off during* POST_PMD after the stream is stopped.*/- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
if (__clk_is_enabled(priv->mclk))
Why do you need to use this in your consumer driver? Do you not know if the clk is on at boot time and then you need to make sure you don't call clk_set_rate() on an already enabled clk? If so, why can't the provider driver for mclk take care of that and do nothing if the clk is enabled already and clk_set_rate() is called with the same rate as what's in the hardware?
On Tue, Dec 05, 2017 at 03:33:26PM -0800, Stephen Boyd wrote:
On 11/22, Sriram Periyasamy wrote:
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)+{
- struct snd_soc_dapm_context *dapm = w->dapm;
- struct snd_soc_card *card = dapm->card;
- struct kbl_rt5663_private *priv = snd_soc_card_get_drvdata(card);
- int ret = 0;
- /*
* MCLK/SCLK need to be ON early for a successful synchronization of* codec internal clock. And the clocks are turned off during* POST_PMD after the stream is stopped.*/- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
if (__clk_is_enabled(priv->mclk))Why do you need to use this in your consumer driver? Do you not know if the clk is on at boot time and then you need to make sure you don't call clk_set_rate() on an already enabled clk? If so, why can't the provider driver for mclk take care of that and do nothing if the clk is enabled already and clk_set_rate() is called with the same rate as what's in the hardware?
yes makes sense, we will move the check of __clk_is_enabled() in the provider driver and let that return success if it is already at same rate etc and is enabled.
From: Naveen M naveen.m@intel.com
rt5663 and rt5514 needs mclk/sclk early to synchronize its internal clocks.
Signed-off-by: Naveen M naveen.m@intel.com Signed-off-by: Harsha Priya harshapriya.n@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com --- sound/soc/intel/boards/Kconfig | 1 + .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 100 +++++++++++++++++++++ 2 files changed, 101 insertions(+)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index f62f2ab..bdddab5 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -275,6 +275,7 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH depends on X86_INTEL_LPSS && I2C && SPI select SND_SOC_INTEL_SST depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_INTEL_SKYLAKE_SSP_CLK select SND_SOC_RT5663 select SND_SOC_RT5514 select SND_SOC_RT5514_SPI diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index e767283..245300c 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -30,6 +30,9 @@ #include "../../codecs/rt5663.h" #include "../../codecs/hdac_hdmi.h" #include "../skylake/skl.h" +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h>
#define KBL_REALTEK_CODEC_DAI "rt5663-aif" #define KBL_REALTEK_DMIC_CODEC_DAI "rt5514-aif1" @@ -58,6 +61,8 @@ struct kbl_codec_private { struct snd_soc_jack kabylake_headset; struct list_head hdmi_pcm_list; struct snd_soc_jack kabylake_hdmi[2]; + struct clk *mclk; + struct clk *sclk; };
enum { @@ -79,6 +84,67 @@ static const struct snd_kcontrol_new kabylake_controls[] = { SOC_DAPM_PIN_SWITCH("DMIC"), };
+static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct kbl_codec_private *priv = snd_soc_card_get_drvdata(card); + int ret = 0; + + /* + * MCLK/SCLK need to be ON early for a successful synchronization of + * codec internal clock. And the clocks are turned off during + * POST_PMD after the stream is stopped. + */ + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (__clk_is_enabled(priv->mclk)) + return 0; + + /* Enable MCLK */ + ret = clk_set_rate(priv->mclk, 24000000); + if (ret < 0) { + dev_err(card->dev, "Can't set rate for mclk, err: %d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, "Can't enable mclk, err: %d\n", ret); + return ret; + } + + /* Enable SCLK */ + ret = clk_set_rate(priv->sclk, 3072000); + if (ret < 0) { + dev_err(card->dev, "Can't set rate for sclk, err: %d\n", + ret); + clk_disable_unprepare(priv->mclk); + return ret; + } + + ret = clk_prepare_enable(priv->sclk); + if (ret < 0) { + dev_err(card->dev, "Can't enable sclk, err: %d\n", ret); + clk_disable_unprepare(priv->mclk); + } + break; + case SND_SOC_DAPM_POST_PMD: + if (!__clk_is_enabled(priv->mclk)) + return 0; + + clk_disable_unprepare(priv->mclk); + clk_disable_unprepare(priv->sclk); + break; + default: + return 0; + } + + return 0; +} + static const struct snd_soc_dapm_widget kabylake_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -87,11 +153,15 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = { SND_SOC_DAPM_MIC("DMIC", NULL), SND_SOC_DAPM_SPK("HDMI1", NULL), SND_SOC_DAPM_SPK("HDMI2", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD),
};
static const struct snd_soc_dapm_route kabylake_map[] = { /* Headphones */ + { "Headphone Jack", NULL, "Platform Clock" }, { "Headphone Jack", NULL, "HPOL" }, { "Headphone Jack", NULL, "HPOR" },
@@ -100,6 +170,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = { { "Right Spk", NULL, "Right BE_OUT" },
/* other jacks */ + { "Headset Mic", NULL, "Platform Clock" }, { "IN1P", NULL, "Headset Mic" }, { "IN1N", NULL, "Headset Mic" },
@@ -648,6 +719,7 @@ static int kabylake_audio_probe(struct platform_device *pdev) { struct kbl_codec_private *ctx; struct skl_machine_pdata *pdata; + int ret = 0;
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC); if (!ctx) @@ -663,6 +735,34 @@ static int kabylake_audio_probe(struct platform_device *pdev) dmic_constraints = pdata->dmic_num == 2 ? &constraints_dmic_2ch : &constraints_dmic_channels;
+ ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk"); + if (IS_ERR(ctx->mclk)) { + ret = PTR_ERR(ctx->mclk); + if (ret == -ENOENT) { + dev_info(&pdev->dev, + "Failed to get ssp1_mclk, defer probe\n"); + return -EPROBE_DEFER; + } + + dev_err(&pdev->dev, "Failed to get ssp1_mclk with err:%d\n", + ret); + return ret; + } + + ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk"); + if (IS_ERR(ctx->sclk)) { + ret = PTR_ERR(ctx->sclk); + if (ret == -ENOENT) { + dev_info(&pdev->dev, + "Failed to get ssp1_sclk, defer probe\n"); + return -EPROBE_DEFER; + } + + dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n", + ret); + return ret; + } + return devm_snd_soc_register_card(&pdev->dev, &kabylake_audio_card); }
From: "Subhransu S. Prusty" subhransu.s.prusty@intel.com
Add more meaning to the IPC replies for easy debugging. Replace the switch case with a lookup table to lookup for the IPC replies and print in human readable form.
Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/intel/skylake/skl-sst-ipc.c | 44 ++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 5234faf..8708755 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -392,18 +392,43 @@ int skl_ipc_process_notification(struct sst_generic_ipc *ipc, return 0; }
-static int skl_ipc_set_reply_error_code(u32 reply) +struct skl_ipc_err_map { + const char *msg; + enum skl_ipc_glb_reply reply; + int err; +}; + +static struct skl_ipc_err_map skl_err_map[] = { + {"DSP out of memory", IPC_GLB_REPLY_OUT_OF_MEMORY, -ENOMEM}, + {"DSP busy", IPC_GLB_REPLY_BUSY, -EBUSY}, +}; + +static int skl_ipc_set_reply_error_code(struct sst_generic_ipc *ipc, u32 reply) { - switch (reply) { - case IPC_GLB_REPLY_OUT_OF_MEMORY: - return -ENOMEM; + int i;
- case IPC_GLB_REPLY_BUSY: - return -EBUSY; + for (i = 0; i < ARRAY_SIZE(skl_err_map); i++) { + if (skl_err_map[i].reply == reply) + break; + }
- default: + if (i == ARRAY_SIZE(skl_err_map)) { + dev_err(ipc->dev, "ipc FW reply: %d FW Error Code: %u\n", + reply, + ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); return -EINVAL; } + + if (skl_err_map[i].err < 0) + dev_err(ipc->dev, "ipc FW reply: %s FW Error Code: %u\n", + skl_err_map[i].msg, + ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); + else + dev_info(ipc->dev, "ipc FW reply: %s FW Error Code: %u\n", + skl_err_map[i].msg, + ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); + + return skl_err_map[i].err; }
void skl_ipc_process_reply(struct sst_generic_ipc *ipc, @@ -441,10 +466,7 @@ void skl_ipc_process_reply(struct sst_generic_ipc *ipc,
} } else { - msg->errno = skl_ipc_set_reply_error_code(reply); - dev_err(ipc->dev, "ipc FW reply: reply=%d\n", reply); - dev_err(ipc->dev, "FW Error Code: %u\n", - ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); + msg->errno = skl_ipc_set_reply_error_code(ipc, reply); switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { case IPC_GLB_LOAD_MULTIPLE_MODS: case IPC_GLB_LOAD_LIBRARY:
From: "Subhransu S. Prusty" subhransu.s.prusty@intel.com
If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK already running. Add these to the IPC reply lookup table.
Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/intel/skylake/skl-sst-ipc.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 8708755..9f3ce73 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -249,6 +249,8 @@ enum skl_ipc_glb_reply { IPC_GLB_REPLY_INVALID_CONFIG_DATA_LEN = 121, IPC_GLB_REPLY_GATEWAY_NOT_INITIALIZED = 140, IPC_GLB_REPLY_GATEWAY_NOT_EXIST = 141, + IPC_GLB_REPLY_SCLK_ALREADY_RUNNING = 150, + IPC_GLB_REPLY_MCLK_ALREADY_RUNNING = 151,
IPC_GLB_REPLY_PPL_NOT_INITIALIZED = 160, IPC_GLB_REPLY_PPL_NOT_EXIST = 161, @@ -401,6 +403,10 @@ struct skl_ipc_err_map { static struct skl_ipc_err_map skl_err_map[] = { {"DSP out of memory", IPC_GLB_REPLY_OUT_OF_MEMORY, -ENOMEM}, {"DSP busy", IPC_GLB_REPLY_BUSY, -EBUSY}, + {"SCLK already running", IPC_GLB_REPLY_SCLK_ALREADY_RUNNING, + IPC_GLB_REPLY_SCLK_ALREADY_RUNNING}, + {"MCLK already running", IPC_GLB_REPLY_MCLK_ALREADY_RUNNING, + IPC_GLB_REPLY_MCLK_ALREADY_RUNNING}, };
static int skl_ipc_set_reply_error_code(struct sst_generic_ipc *ipc, u32 reply)
On Wed, Nov 22, 2017 at 05:39:45PM +0530, Sriram Periyasamy wrote:
For certain platforms, clocks (mclk/sclk/fs) are required to be up before the stream start. Example: some codecs needs the mclk/sclk/fs to be enabled early for a successful clock synchronization. Some platforms require clock to be enabled at boot and be always ON.
By sending set_dma_control IPC (with the i2s blobs queried from NHLT), these clocks can be enabled early after the firmware is downloaded.
With this series, a virtual clock driver is created which provides interface to send the required IPCs from machine driver to enable the clocks. NHLT is parsed during probe and the clock information is populated. The pointer to blob is cached and sent along with the set_dma_control IPC structure during the clk prepare/unprepare callback. Clocks are created for a ssp if the nhlt table has endpoint configuration for that particular ssp. Skylake driver creates a platform driver with the clock information and register the clk ops callback.
Kabylake machine driver uses the clock interface to enable the clocks early as it is required by the rt5663 driver for clock synchronization.
All:
Acked-By: Vinod Koul vinod.koul@intel.com
participants (3)
-
Sriram Periyasamy -
Stephen Boyd -
Vinod Koul