June 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: fsl: Add dedicated DMA buffer size for each cpu dai
by Shengjiu Wang 07 Jul '15

07 Jul '15

As the ssi is not the only cpu dai, there are esai, spdif, sai. and imx_pcm_dma can be used by all of them. Especially ESAI need a larger DMA buffer size. So Add dedicated DMA buffer for each cpu dai. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)freescale.com> --- sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_sai.c | 2 +- sound/soc/fsl/fsl_spdif.c | 2 +- sound/soc/fsl/fsl_ssi.c | 2 +- sound/soc/fsl/imx-pcm-dma.c | 25 +++++++++++++++++++++---- sound/soc/fsl/imx-pcm.h | 9 +++++++-- sound/soc/fsl/imx-ssi.c | 2 +- 7 files changed, 33 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 5c75971..8c2ddc1 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -839,7 +839,7 @@ static int fsl_esai_probe(struct platform_device *pdev) return ret; } - ret = imx_pcm_dma_init(pdev); + ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE); if (ret) dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 5c73bea..a18fd92 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -791,7 +791,7 @@ static int fsl_sai_probe(struct platform_device *pdev) return ret; if (sai->sai_on_imx) - return imx_pcm_dma_init(pdev); + return imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE); else return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); } diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 8e93221..d1e9be7 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1255,7 +1255,7 @@ static int fsl_spdif_probe(struct platform_device *pdev) return ret; } - ret = imx_pcm_dma_init(pdev); + ret = imx_pcm_dma_init(pdev, IMX_SPDIF_DMABUF_SIZE); if (ret) dev_err(&pdev->dev, "imx_pcm_dma_init failed: %d\n", ret); diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index c7647e0..e122dab 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -1257,7 +1257,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, if (ret) goto error_pcm; } else { - ret = imx_pcm_dma_init(pdev); + ret = imx_pcm_dma_init(pdev, IMX_SSI_DMABUF_SIZE); if (ret) goto error_pcm; } diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 0db94f49..1fc01ed 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -40,7 +40,7 @@ static const struct snd_pcm_hardware imx_pcm_hardware = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME, - .buffer_bytes_max = IMX_SSI_DMABUF_SIZE, + .buffer_bytes_max = IMX_DEFAULT_DMABUF_SIZE, .period_bytes_min = 128, .period_bytes_max = 65535, /* Limited by SDMA engine */ .periods_min = 2, @@ -52,13 +52,30 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = { .pcm_hardware = &imx_pcm_hardware, .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, .compat_filter_fn = filter, - .prealloc_buffer_size = IMX_SSI_DMABUF_SIZE, + .prealloc_buffer_size = IMX_DEFAULT_DMABUF_SIZE, }; -int imx_pcm_dma_init(struct platform_device *pdev) +int imx_pcm_dma_init(struct platform_device *pdev, size_t size) { + struct snd_dmaengine_pcm_config *config; + struct snd_pcm_hardware *pcm_hardware; + + config = devm_kzalloc(&pdev->dev, + sizeof(struct snd_dmaengine_pcm_config), GFP_KERNEL); + *config = imx_dmaengine_pcm_config; + if (size) + config->prealloc_buffer_size = size; + + pcm_hardware = devm_kzalloc(&pdev->dev, + sizeof(struct snd_pcm_hardware), GFP_KERNEL); + *pcm_hardware = imx_pcm_hardware; + if (size) + pcm_hardware->buffer_bytes_max = size; + + config->pcm_hardware = pcm_hardware; + return devm_snd_dmaengine_pcm_register(&pdev->dev, - &imx_dmaengine_pcm_config, + config, SND_DMAENGINE_PCM_FLAG_COMPAT); } EXPORT_SYMBOL_GPL(imx_pcm_dma_init); diff --git a/sound/soc/fsl/imx-pcm.h b/sound/soc/fsl/imx-pcm.h index c79cb27..133c4470a 100644 --- a/sound/soc/fsl/imx-pcm.h +++ b/sound/soc/fsl/imx-pcm.h @@ -20,6 +20,11 @@ */ #define IMX_SSI_DMABUF_SIZE (64 * 1024) +#define IMX_DEFAULT_DMABUF_SIZE (64 * 1024) +#define IMX_SAI_DMABUF_SIZE (64 * 1024) +#define IMX_SPDIF_DMABUF_SIZE (64 * 1024) +#define IMX_ESAI_DMABUF_SIZE (256 * 1024) + static inline void imx_pcm_dma_params_init_data(struct imx_dma_data *dma_data, int dma, enum sdma_peripheral_type peripheral_type) @@ -39,9 +44,9 @@ struct imx_pcm_fiq_params { }; #if IS_ENABLED(CONFIG_SND_SOC_IMX_PCM_DMA) -int imx_pcm_dma_init(struct platform_device *pdev); +int imx_pcm_dma_init(struct platform_device *pdev, size_t size); #else -static inline int imx_pcm_dma_init(struct platform_device *pdev) +static inline int imx_pcm_dma_init(struct platform_device *pdev, size_t size) { return -ENODEV; } diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 461ce27..48b2d24 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -603,7 +603,7 @@ static int imx_ssi_probe(struct platform_device *pdev) ssi->fiq_params.dma_params_tx = &ssi->dma_params_tx; ssi->fiq_init = imx_pcm_fiq_init(pdev, &ssi->fiq_params); - ssi->dma_init = imx_pcm_dma_init(pdev); + ssi->dma_init = imx_pcm_dma_init(pdev, IMX_SSI_DMABUF_SIZE); if (ssi->fiq_init && ssi->dma_init) { ret = ssi->fiq_init; -- 1.7.9.5

4 3

[alsa-devel] [PATCH v2] ASoC: fsl: fsl_asrc: Check for clk_prepare_enable() error
by Fabio Estevam 07 Jul '15

07 Jul '15

From: Fabio Estevam <fabio.estevam(a)freescale.com> clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- Changes since v1: - Also handle the error for asrck_clk[i] as suggested by Nicolin sound/soc/fsl/fsl_asrc.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index c068494..9f087d4 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -931,14 +931,29 @@ static int fsl_asrc_probe(struct platform_device *pdev) static int fsl_asrc_runtime_resume(struct device *dev) { struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); - int i; + int i, ret; - clk_prepare_enable(asrc_priv->mem_clk); - clk_prepare_enable(asrc_priv->ipg_clk); - for (i = 0; i < ASRC_CLK_MAX_NUM; i++) - clk_prepare_enable(asrc_priv->asrck_clk[i]); + ret = clk_prepare_enable(asrc_priv->mem_clk); + if (ret) + return ret; + ret = clk_prepare_enable(asrc_priv->ipg_clk); + if (ret) + goto disable_mem_clk; + for (i = 0; i < ASRC_CLK_MAX_NUM; i++) { + ret = clk_prepare_enable(asrc_priv->asrck_clk[i]); + if (ret) + goto disable_asrck_clk; + } return 0; + +disable_asrck_clk: + for (i--; i >= 0; i--) + clk_disable_unprepare(asrc_priv->asrck_clk[i]); + clk_disable_unprepare(asrc_priv->ipg_clk); +disable_mem_clk: + clk_disable_unprepare(asrc_priv->mem_clk); + return ret; } static int fsl_asrc_runtime_suspend(struct device *dev) -- 1.9.1

3 2

[alsa-devel] [PATCH] ASoC: fsl: fsl_spdif: Check for clk_prepare_enable() error
by Fabio Estevam 07 Jul '15

07 Jul '15

From: Fabio Estevam <fabio.estevam(a)freescale.com> clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- sound/soc/fsl/fsl_spdif.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 8e93221..489fa86 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -482,13 +482,18 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream, mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | SCR_TXFIFO_FSEL_MASK; - for (i = 0; i < SPDIF_TXRATE_MAX; i++) - clk_prepare_enable(spdif_priv->txclk[i]); + for (i = 0; i < SPDIF_TXRATE_MAX; i++) { + ret = clk_prepare_enable(spdif_priv->txclk[i]); + if (ret) + goto disable_txclk; + } } else { scr = SCR_RXFIFO_FSEL_IF8 | SCR_RXFIFO_AUTOSYNC; mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK; - clk_prepare_enable(spdif_priv->rxclk); + ret = clk_prepare_enable(spdif_priv->rxclk); + if (ret) + goto err; } regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr); @@ -497,6 +502,9 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream, return 0; +disable_txclk: + for (i--; i >= 0; i--) + clk_disable_unprepare(spdif_priv->txclk[i]); err: clk_disable_unprepare(spdif_priv->coreclk); -- 1.9.1

3 2

[alsa-devel] [PATCH 1/2] ASoC: rt5677: Switch to use descriptor-based gpiod API
by Ben Zhang 07 Jul '15

07 Jul '15

This patch makes the driver use the new descriptor-based gpiod API so that gpio assignment info can be provided by Device Tree, ACPI or board files. Signed-off-by: Ben Zhang <benzh(a)chromium.org> --- sound/soc/codecs/rt5677.c | 85 +++++++++++++++++------------------------------ sound/soc/codecs/rt5677.h | 5 +-- 2 files changed, 33 insertions(+), 57 deletions(-) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index aba00fd8..c166217 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -15,13 +15,11 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> -#include <linux/of_gpio.h> #include <linux/regmap.h> #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/firmware.h> -#include <linux/gpio.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -4761,10 +4759,10 @@ static int rt5677_remove(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 0); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 0); + if (rt5677->pow_ldo2) + gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); + if (rt5677->reset_pin) + gpiod_set_value_cansleep(rt5677->reset_pin, 0); return 0; } @@ -4778,10 +4776,10 @@ static int rt5677_suspend(struct snd_soc_codec *codec) regcache_cache_only(rt5677->regmap, true); regcache_mark_dirty(rt5677->regmap); - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 0); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 0); + if (rt5677->pow_ldo2) + gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); + if (rt5677->reset_pin) + gpiod_set_value_cansleep(rt5677->reset_pin, 0); } return 0; @@ -4792,12 +4790,11 @@ static int rt5677_resume(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); if (!rt5677->dsp_vad_en) { - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 1); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 1); - if (gpio_is_valid(rt5677->pow_ldo2) || - gpio_is_valid(rt5677->reset_pin)) + if (rt5677->pow_ldo2) + gpiod_set_value_cansleep(rt5677->pow_ldo2, 1); + if (rt5677->reset_pin) + gpiod_set_value_cansleep(rt5677->reset_pin, 1); + if (rt5677->pow_ldo2 || rt5677->reset_pin) msleep(10); regcache_cache_only(rt5677->regmap, false); @@ -5034,24 +5031,6 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np) rt5677->pdata.lout3_diff = of_property_read_bool(np, "realtek,lout3-differential"); - rt5677->pow_ldo2 = of_get_named_gpio(np, - "realtek,pow-ldo2-gpio", 0); - rt5677->reset_pin = of_get_named_gpio(np, - "realtek,reset-gpio", 0); - - /* - * POW_LDO2 is optional (it may be statically tied on the board). - * -ENOENT means that the property doesn't exist, i.e. there is no - * GPIO, so is not an error. Any other error code means the property - * exists, but could not be parsed. - */ - if (!gpio_is_valid(rt5677->pow_ldo2) && - (rt5677->pow_ldo2 != -ENOENT)) - return rt5677->pow_ldo2; - if (!gpio_is_valid(rt5677->reset_pin) && - (rt5677->reset_pin != -ENOENT)) - return rt5677->reset_pin; - of_property_read_u8_array(np, "realtek,gpio-config", rt5677->pdata.gpio_config, RT5677_GPIO_NUM); @@ -5155,30 +5134,26 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, rt5677->reset_pin = -EINVAL; } - if (gpio_is_valid(rt5677->pow_ldo2)) { - ret = devm_gpio_request_one(&i2c->dev, rt5677->pow_ldo2, - GPIOF_OUT_INIT_HIGH, - "RT5677 POW_LDO2"); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to request POW_LDO2 %d: %d\n", - rt5677->pow_ldo2, ret); - return ret; - } + /* pow-ldo2 and reset are optional. The codec pins may be statically + * connected on the board without gpios. If the gpio device property + * isn't specified, devm_gpiod_get_optional returns NULL. + */ + rt5677->pow_ldo2 = devm_gpiod_get_optional(&i2c->dev, + "realtek,pow-ldo2", GPIOD_OUT_HIGH); + if (IS_ERR(rt5677->pow_ldo2)) { + ret = PTR_ERR(rt5677->pow_ldo2); + dev_err(&i2c->dev, "Failed to request POW_LDO2: %d\n", ret); + rt5677->pow_ldo2 = 0; } - - if (gpio_is_valid(rt5677->reset_pin)) { - ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin, - GPIOF_OUT_INIT_HIGH, - "RT5677 RESET"); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to request RESET %d: %d\n", - rt5677->reset_pin, ret); - return ret; - } + rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev, + "realtek,reset", GPIOD_OUT_HIGH); + if (IS_ERR(rt5677->reset_pin)) { + ret = PTR_ERR(rt5677->reset_pin); + dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret); + rt5677->reset_pin = 0; } - if (gpio_is_valid(rt5677->pow_ldo2) || - gpio_is_valid(rt5677->reset_pin)) { + if (rt5677->pow_ldo2 || rt5677->reset_pin) { /* Wait a while until I2C bus becomes available. The datasheet * does not specify the exact we should wait but startup * sequence mentiones at least a few milliseconds. diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h index 7eca38a..d46855a 100644 --- a/sound/soc/codecs/rt5677.h +++ b/sound/soc/codecs/rt5677.h @@ -14,6 +14,7 @@ #include <sound/rt5677.h> #include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> /* Info */ #define RT5677_RESET 0x00 @@ -1775,8 +1776,8 @@ struct rt5677_priv { int pll_src; int pll_in; int pll_out; - int pow_ldo2; /* POW_LDO2 pin */ - int reset_pin; /* RESET pin */ + struct gpio_desc *pow_ldo2; /* POW_LDO2 pin */ + struct gpio_desc *reset_pin; /* RESET pin */ enum rt5677_type type; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio_chip; -- 2.4.3.573.g4eafbef

5 8

[alsa-devel] [PATCH 1/2] ASoC: cs42xx8: Move the code checking *regmap argument earlier
by Axel Lin 07 Jul '15

07 Jul '15

Slightly improve the readability by moving the code checking *regmap argument earlier. Also move the assignment of of_id close to the place testing it. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/codecs/cs42xx8.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/cs42xx8.c b/sound/soc/codecs/cs42xx8.c index e1d4686..ab39514 100644 --- a/sound/soc/codecs/cs42xx8.c +++ b/sound/soc/codecs/cs42xx8.c @@ -435,16 +435,24 @@ EXPORT_SYMBOL_GPL(cs42xx8_of_match); int cs42xx8_probe(struct device *dev, struct regmap *regmap) { - const struct of_device_id *of_id = of_match_device(cs42xx8_of_match, dev); + const struct of_device_id *of_id; struct cs42xx8_priv *cs42xx8; int ret, val, i; + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(dev, "failed to allocate regmap: %d\n", ret); + return ret; + } + cs42xx8 = devm_kzalloc(dev, sizeof(*cs42xx8), GFP_KERNEL); if (cs42xx8 == NULL) return -ENOMEM; + cs42xx8->regmap = regmap; dev_set_drvdata(dev, cs42xx8); + of_id = of_match_device(cs42xx8_of_match, dev); if (of_id) cs42xx8->drvdata = of_id->data; @@ -482,13 +490,6 @@ int cs42xx8_probe(struct device *dev, struct regmap *regmap) /* Make sure hardware reset done */ msleep(5); - cs42xx8->regmap = regmap; - if (IS_ERR(cs42xx8->regmap)) { - ret = PTR_ERR(cs42xx8->regmap); - dev_err(dev, "failed to allocate regmap: %d\n", ret); - goto err_enable; - } - /* * We haven't marked the chip revision as volatile due to * sharing a register with the right input volume; explicitly -- 2.1.0

3 4

[alsa-devel] [PATCH] ASoC: 88pm860x: Don't change pm860x->dir setting if pm860x_set_dai_sysclk fails
by Axel Lin 07 Jul '15

07 Jul '15

88pm860x does not support slave mode, so it returns -EINVAL for PM860X_CLK_DIR_IN. Current code changes pm860x->dir setting before return error, so it has impact on the logic of pm860x_pcm_set_dai_fmt. This patch adds comment for the reason to return -EINVAL for PM860X_CLK_DIR_IN, and avoid changing pm860x->dir setting if pm860x_set_dai_sysclk fails. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/codecs/88pm860x-codec.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c index 38b3dad..4d91a6a 100644 --- a/sound/soc/codecs/88pm860x-codec.c +++ b/sound/soc/codecs/88pm860x-codec.c @@ -1028,10 +1028,8 @@ static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, if (dir == PM860X_CLK_DIR_OUT) pm860x->dir = PM860X_CLK_DIR_OUT; - else { - pm860x->dir = PM860X_CLK_DIR_IN; + else /* Slave mode is not supported */ return -EINVAL; - } return 0; } -- 2.1.0

3 2

[alsa-devel] [PATCH v2] ASoC: ak4642: Fix up max_register setting
by Axel Lin 07 Jul '15

07 Jul '15

The max_register setting for ak4642, ak4643 and ak4648 are wrong, fix it. According to the datasheet: the maximum valid register for ak4642 is 0x1f the maximum valid register for ak4643 is 0x24 the maximum valid register for ak4648 is 0x27 The default settings for ak4642 and ak4643 are the same for 0x0 ~ 0x1f registers, so it's fine to use the same reg_default table with differnt num_reg_defaults setting. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- v2: Improve readability by using below defines (with comment). #define ak4642_reg ak4643_reg #define NUM_AK4642_REG_DEFAULTS (FIL1_3 + 1) sound/soc/codecs/ak4642.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 7c0f6552..fe963e1 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -64,12 +64,15 @@ #define FIL1_0 0x1c #define FIL1_1 0x1d #define FIL1_2 0x1e -#define FIL1_3 0x1f +#define FIL1_3 0x1f /* The maximum valid register for ak4642 */ #define PW_MGMT4 0x20 #define MD_CTL5 0x21 #define LO_MS 0x22 #define HP_MS 0x23 -#define SPK_MS 0x24 +#define SPK_MS 0x24 /* The maximum valid register for ak4643 */ +#define EQ_FBEQAB 0x25 +#define EQ_FBEQCD 0x26 +#define EQ_FBEQE 0x27 /* The maximum valid register for ak4648 */ /* PW_MGMT1*/ #define PMVCM (1 << 6) /* VCOM Power Management */ @@ -241,7 +244,7 @@ static const struct snd_soc_dapm_route ak4642_intercon[] = { /* * ak4642 register cache */ -static const struct reg_default ak4642_reg[] = { +static const struct reg_default ak4643_reg[] = { { 0, 0x00 }, { 1, 0x00 }, { 2, 0x01 }, { 3, 0x00 }, { 4, 0x02 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 }, { 8, 0xe1 }, { 9, 0xe1 }, { 10, 0x18 }, { 11, 0x00 }, @@ -254,6 +257,14 @@ static const struct reg_default ak4642_reg[] = { { 36, 0x00 }, }; +/* The default settings for 0x0 ~ 0x1f registers are the same for ak4642 + and ak4643. So we reuse the ak4643 reg_default for ak4642. + The valid registers for ak4642 are 0x0 ~ 0x1f which is a subset of ak4643, + so define NUM_AK4642_REG_DEFAULTS for ak4642. +*/ +#define ak4642_reg ak4643_reg +#define NUM_AK4642_REG_DEFAULTS (FIL1_3 + 1) + static const struct reg_default ak4648_reg[] = { { 0, 0x00 }, { 1, 0x00 }, { 2, 0x01 }, { 3, 0x00 }, { 4, 0x02 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 }, @@ -535,15 +546,23 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4642 = { static const struct regmap_config ak4642_regmap = { .reg_bits = 8, .val_bits = 8, - .max_register = ARRAY_SIZE(ak4642_reg) + 1, + .max_register = FIL1_3, .reg_defaults = ak4642_reg, - .num_reg_defaults = ARRAY_SIZE(ak4642_reg), + .num_reg_defaults = NUM_AK4642_REG_DEFAULTS, +}; + +static const struct regmap_config ak4643_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = SPK_MS, + .reg_defaults = ak4643_reg, + .num_reg_defaults = ARRAY_SIZE(ak4643_reg), }; static const struct regmap_config ak4648_regmap = { .reg_bits = 8, .val_bits = 8, - .max_register = ARRAY_SIZE(ak4648_reg) + 1, + .max_register = EQ_FBEQE, .reg_defaults = ak4648_reg, .num_reg_defaults = ARRAY_SIZE(ak4648_reg), }; @@ -553,7 +572,7 @@ static const struct ak4642_drvdata ak4642_drvdata = { }; static const struct ak4642_drvdata ak4643_drvdata = { - .regmap_config = &ak4642_regmap, + .regmap_config = &ak4643_regmap, }; static const struct ak4642_drvdata ak4648_drvdata = { -- 2.1.0

3 2

[alsa-devel] [PATCH] ASoC: lm49453: Remove fs_rate from struct lm49453_priv
by Axel Lin 07 Jul '15

07 Jul '15

fs_rate is only used in lm49453_hw_params() so don't need to store it in private data. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/codecs/lm49453.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c index 6600aa0..5b4086d 100644 --- a/sound/soc/codecs/lm49453.c +++ b/sound/soc/codecs/lm49453.c @@ -188,7 +188,6 @@ static struct reg_default lm49453_reg_defs[] = { /* codec private data */ struct lm49453_priv { struct regmap *regmap; - int fs_rate; }; /* capture path controls */ @@ -1112,13 +1111,10 @@ static int lm49453_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; - struct lm49453_priv *lm49453 = snd_soc_codec_get_drvdata(codec); u16 clk_div = 0; - lm49453->fs_rate = params_rate(params); - /* Setting DAC clock dividers based on substream sample rate. */ - switch (lm49453->fs_rate) { + switch (params_rate(params)) { case 8000: case 16000: case 32000: -- 2.1.0

2 1

[alsa-devel] [PATCH 1/2] ASoC: qcom: move board Kconfig deps to parent config
by Kenneth Westfield 07 Jul '15

07 Jul '15

From: Kenneth Westfield <kwestfie(a)codeaurora.org> Rather than have each board define the same set of dependencies; move the common dependencies to the SND_SOC_QCOM parent config. Signed-off-by: Kenneth Westfield <kwestfie(a)codeaurora.org> --- sound/soc/qcom/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 807fedf..d6ccda7 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -1,5 +1,6 @@ config SND_SOC_QCOM tristate "ASoC support for QCOM platforms" + depends on ARCH_QCOM || COMPILE_TEST help Say Y or M if you want to add support to use audio devices in Qualcomm Technologies SOC-based platforms. @@ -26,7 +27,7 @@ config SND_SOC_LPASS_APQ8016 config SND_SOC_STORM tristate "ASoC I2S support for Storm boards" - depends on SND_SOC_QCOM && (ARCH_QCOM || COMPILE_TEST) + depends on SND_SOC_QCOM select SND_SOC_LPASS_IPQ806X select SND_SOC_MAX98357A help @@ -35,7 +36,7 @@ config SND_SOC_STORM config SND_SOC_APQ8016_SBC tristate "SoC Audio support for APQ8016 SBC platforms" - depends on SND_SOC_QCOM && (ARCH_QCOM || COMPILE_TEST) + depends on SND_SOC_QCOM select SND_SOC_LPASS_APQ8016 help Support for Qualcomm Technologies LPASS audio block in -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

2 2

[alsa-devel] [PATCH] ASoC: qcom: Remove QCOM dependency from LPASS variants
by Kenneth Westfield 07 Jul '15

07 Jul '15

From: Kenneth Westfield <kwestfie(a)codeaurora.org> Remove the dependency on SND_SOC_QCOM from the user- invisible LPASS variant options. This will fix randconfig build errors. Reported-by: Jim Davis <jim.epost(a)gmail.com> Fixes: dc1ebd1811e9 ("ASoC: qcom: Add apq8016 lpass driver support") Fixes: 9bae4880acee ("ASoC: qcom: move ipq806x specific bits out of lpass driver") Signed-off-by: Kenneth Westfield <kwestfie(a)codeaurora.org> --- Created fix in response to Jim's bug report: http://mailman.alsa-project.org/pipermail/alsa-devel/2015-May/092870.html Note: I did some searching but didn't see an example of a fix for the same type of bug introduced by 2 commits. If this needs to be split into two fixes, let me know. sound/soc/qcom/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 29fff6d..10837bd 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -14,13 +14,11 @@ config SND_SOC_LPASS_PLATFORM config SND_SOC_LPASS_IPQ806X tristate - depends on SND_SOC_QCOM select SND_SOC_LPASS_CPU select SND_SOC_LPASS_PLATFORM config SND_SOC_LPASS_APQ8016 tristate - depends on SND_SOC_QCOM select SND_SOC_LPASS_CPU select SND_SOC_LPASS_PLATFORM -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

2 2