Hello,
the SF16-FMR2 radio card is basically a TEA5757 tuner connected to ISA bus but
the driver currently uses its own implementation. I converted the driver to
use generic tea575x-tuner implementation (see patch below) and it works fine.
But the tea575x-tuner module is located in /sound/i2c/other and the
corresponding Kconfig in /sound/pci. Should it be moved
to /drivers/media/radio or better leave it as is?
The card can optionally be equipped with PT2254A volume control (equivalent of
TC9154AP) so I need to extend tea575x-tuner to allow adding additional V4L2
controls (and add one if the chip is present). Is this OK or should be
something like v4l2_subdev used somehow?
(My card does not have the PT2254A chip so that code is untested.)
--- linux-2.6.39-rc2-/include/sound/tea575x-tuner.h 2011-05-13 19:39:23.000000000 +0200
+++ linux-2.6.39-rc2/include/sound/tea575x-tuner.h 2011-05-14 00:14:23.000000000 +0200
@@ -54,6 +54,11 @@ struct snd_tea575x {
void *private_data;
u8 card[32];
u8 bus_info[32];
+ /* card driver can provide additional controls (e.g. volume) */
+ struct v4l2_queryctrl *extra_ctrls; /* array of controls */
+ int num_extra_ctrls; /* number of additional controls */
+ int (*g_extra_ctrl)(struct file *file, void *fh, struct v4l2_control *a);
+ int (*s_extra_ctrl)(struct file *file, void *fh, struct v4l2_control *a);
};
int snd_tea575x_init(struct snd_tea575x *tea);
--- linux-2.6.39-rc2-/sound/i2c/other/tea575x-tuner.c 2011-05-13 19:39:23.000000000 +0200
+++ linux-2.6.39-rc2/sound/i2c/other/tea575x-tuner.c 2011-05-13 21:35:57.000000000 +0200
@@ -269,6 +269,7 @@ static int vidioc_s_audio(struct file *f
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
+ struct snd_tea575x *tea = video_drvdata(file);
int i;
for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
@@ -278,6 +279,13 @@ static int vidioc_queryctrl(struct file
return 0;
}
}
+ for (i = 0; i < tea->num_extra_ctrls; i++) {
+ if (qc->id && qc->id == tea->extra_ctrls[i].id) {
+ memcpy(qc, &(tea->extra_ctrls[i]),
+ sizeof(*qc));
+ return 0;
+ }
+ }
return -EINVAL;
}
@@ -291,6 +299,10 @@ static int vidioc_g_ctrl(struct file *fi
ctrl->value = tea->mute;
return 0;
}
+
+ if (tea->g_extra_ctrl)
+ return tea->g_extra_ctrl(file, priv, ctrl);
+
return -EINVAL;
}
@@ -307,6 +319,10 @@ static int vidioc_s_ctrl(struct file *fi
}
return 0;
}
+
+ if (tea->s_extra_ctrl)
+ return tea->s_extra_ctrl(file, priv, ctrl);
+
return -EINVAL;
}
--- linux-2.6.39-rc2-/drivers/media/radio/radio-sf16fmr2.c 2011-04-06 03:30:43.000000000 +0200
+++ linux-2.6.39-rc2/drivers/media/radio/radio-sf16fmr2.c 2011-05-14 00:15:05.000000000 +0200
@@ -1,441 +1,206 @@
-/* SF16FMR2 radio driver for Linux radio support
- * heavily based on fmi driver...
- * (c) 2000-2002 Ziglio Frediano, freddy77(a)angelfire.com
+/* SF16-FMR2 radio driver for Linux
+ * Copyright (c) 2011 Ondrej Zary
*
- * Notes on the hardware
- *
- * Frequency control is done digitally -- ie out(port,encodefreq(95.8));
- * No volume control - only mute/unmute - you have to use line volume
- *
- * For read stereo/mono you must wait 0.1 sec after set frequency and
- * card unmuted so I set frequency on unmute
- * Signal handling seem to work only on autoscanning (not implemented)
- *
- * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab(a)infradead.org>
+ * Original driver was (c) 2000-2002 Ziglio Frediano, freddy77(a)angelfire.com
+ * but almost nothing remained here after conversion to generic TEA575x
+ * interface
*/
+#include <linux/delay.h>
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
-#include <linux/delay.h> /* udelay */
-#include <linux/videodev2.h> /* kernel radio structs */
-#include <linux/mutex.h>
-#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h> /* outb, outb_p */
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
+#include <sound/tea575x-tuner.h>
-MODULE_AUTHOR("Ziglio Frediano, freddy77(a)angelfire.com");
-MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver");
MODULE_LICENSE("GPL");
-static int io = 0x384;
-static int radio_nr = -1;
-
-module_param(io, int, 0);
-MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
-module_param(radio_nr, int, 0);
-
-#define RADIO_VERSION KERNEL_VERSION(0,0,2)
-
-#define AUD_VOL_INDEX 1
-
-#undef DEBUG
-//#define DEBUG 1
-
-#ifdef DEBUG
-# define debug_print(s) printk s
-#else
-# define debug_print(s)
-#endif
-
-/* this should be static vars for module size */
-struct fmr2
-{
- struct v4l2_device v4l2_dev;
- struct video_device vdev;
- struct mutex lock;
+struct fmr2 {
int io;
- int curvol; /* 0-15 */
- int mute;
- int stereo; /* card is producing stereo audio */
- unsigned long curfreq; /* freq in kHz */
- int card_type;
+ int volume;
+ struct snd_tea575x tea;
};
+/* the port is hardwired so no need to support multiple cards */
+#define FMR2_PORT 0x384
static struct fmr2 fmr2_card;
-/* hw precision is 12.5 kHz
- * It is only useful to give freq in interval of 200 (=0.0125Mhz),
- * other bits will be truncated
- */
-#define RSF16_ENCODE(x) ((x) / 200 + 856)
-#define RSF16_MINFREQ (87 * 16000)
-#define RSF16_MAXFREQ (108 * 16000)
-
-static inline void wait(int n, int io)
-{
- for (; n; --n)
- inb(io);
-}
-
-static void outbits(int bits, unsigned int data, int nWait, int io)
-{
- int bit;
-
- for (; --bits >= 0;) {
- bit = (data >> bits) & 1;
- outb(bit, io);
- wait(nWait, io);
- outb(bit | 2, io);
- wait(nWait, io);
- outb(bit, io);
- wait(nWait, io);
- }
-}
-
-static inline void fmr2_mute(int io)
-{
- outb(0x00, io);
- wait(4, io);
-}
-
-static inline void fmr2_unmute(int io)
-{
- outb(0x04, io);
- wait(4, io);
-}
-
-static inline int fmr2_stereo_mode(int io)
-{
- int n = inb(io);
-
- outb(6, io);
- inb(io);
- n = ((n >> 3) & 1) ^ 1;
- debug_print((KERN_DEBUG "stereo: %d\n", n));
- return n;
-}
-
-static int fmr2_product_info(struct fmr2 *dev)
-{
- int n = inb(dev->io);
-
- n &= 0xC1;
- if (n == 0) {
- /* this should support volume set */
- dev->card_type = 12;
- return 0;
- }
- /* not volume (mine is 11) */
- dev->card_type = (n == 128) ? 11 : 0;
- return n;
-}
-
-static inline int fmr2_getsigstr(struct fmr2 *dev)
-{
- /* !!! works only if scanning freq */
- int res = 0xffff;
-
- outb(5, dev->io);
- wait(4, dev->io);
- if (!(inb(dev->io) & 1))
- res = 0;
- debug_print((KERN_DEBUG "signal: %d\n", res));
- return res;
-}
+/* TEA575x tuner pins */
+#define STR_DATA (1 << 0)
+#define STR_CLK (1 << 1)
+#define STR_WREN (1 << 2)
+#define STR_MOST (1 << 3)
+/* PT2254A/TC9154A volume control pins */
+#define PT_ST (1 << 4)
+#define PT_CK (1 << 5)
+#define PT_DATA (1 << 6)
+/* volume control presence pin */
+#define FMR2_HASVOL (1 << 7)
-/* set frequency and unmute card */
-static int fmr2_setfreq(struct fmr2 *dev)
+static void fmr2_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
{
- unsigned long freq = dev->curfreq;
+ struct fmr2 *fmr2 = tea->private_data;
+ u8 bits = 0;
- fmr2_mute(dev->io);
+ bits |= (pins & TEA575X_DATA) ? STR_DATA : 0;
+ bits |= (pins & TEA575X_CLK) ? STR_CLK : 0;
+ /* WRITE_ENABLE is inverted, DATA must be high during read */
+ bits |= (pins & TEA575X_WREN) ? 0 : STR_WREN | STR_DATA;
- /* 0x42 for mono output
- * 0x102 forward scanning
- * 0x182 scansione avanti
- */
- outbits(9, 0x2, 3, dev->io);
- outbits(16, RSF16_ENCODE(freq), 2, dev->io);
-
- fmr2_unmute(dev->io);
-
- /* wait 0.11 sec */
- msleep(110);
-
- /* NOTE if mute this stop radio
- you must set freq on unmute */
- dev->stereo = fmr2_stereo_mode(dev->io);
- return 0;
-}
-
-/* !!! not tested, in my card this does't work !!! */
-static int fmr2_setvolume(struct fmr2 *dev)
-{
- int vol[16] = { 0x021, 0x084, 0x090, 0x104,
- 0x110, 0x204, 0x210, 0x402,
- 0x404, 0x408, 0x410, 0x801,
- 0x802, 0x804, 0x808, 0x810 };
- int i, a;
- int n = vol[dev->curvol & 0x0f];
-
- if (dev->card_type != 11)
- return 1;
-
- for (i = 12; --i >= 0; ) {
- a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */
- outb(a | 4, dev->io);
- wait(4, dev->io);
- outb(a | 0x24, dev->io);
- wait(4, dev->io);
- outb(a | 4, dev->io);
- wait(4, dev->io);
- }
- for (i = 6; --i >= 0; ) {
- a = ((0x18 >> i) & 1) << 6;
- outb(a | 4, dev->io);
- wait(4, dev->io);
- outb(a | 0x24, dev->io);
- wait(4, dev->io);
- outb(a | 4, dev->io);
- wait(4, dev->io);
- }
- wait(4, dev->io);
- outb(0x14, dev->io);
- return 0;
-}
-
-static int vidioc_querycap(struct file *file, void *priv,
- struct v4l2_capability *v)
-{
- strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver));
- strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card));
- strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
- v->version = RADIO_VERSION;
- v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
- return 0;
+ outb(bits, fmr2->io);
}
-static int vidioc_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *v)
+static u8 fmr2_tea575x_get_pins(struct snd_tea575x *tea)
{
- struct fmr2 *fmr2 = video_drvdata(file);
-
- if (v->index > 0)
- return -EINVAL;
+ struct fmr2 *fmr2 = tea->private_data;
+ u8 bits = inb(fmr2->io);
- strlcpy(v->name, "FM", sizeof(v->name));
- v->type = V4L2_TUNER_RADIO;
-
- v->rangelow = RSF16_MINFREQ;
- v->rangehigh = RSF16_MAXFREQ;
- v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO :
- V4L2_TUNER_SUB_MONO;
- v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
- v->audmode = V4L2_TUNER_MODE_STEREO;
- mutex_lock(&fmr2->lock);
- v->signal = fmr2_getsigstr(fmr2);
- mutex_unlock(&fmr2->lock);
- return 0;
+ return (bits & STR_DATA) ? TEA575X_DATA : 0 |
+ (bits & STR_MOST) ? TEA575X_MOST : 0;
}
-static int vidioc_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *v)
+static void fmr2_tea575x_set_direction(struct snd_tea575x *tea, bool output)
{
- return v->index ? -EINVAL : 0;
}
-static int vidioc_s_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
-{
- struct fmr2 *fmr2 = video_drvdata(file);
-
- if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
- return -EINVAL;
- if (f->frequency < RSF16_MINFREQ ||
- f->frequency > RSF16_MAXFREQ)
- return -EINVAL;
- /* rounding in steps of 200 to match the freq
- that will be used */
- fmr2->curfreq = (f->frequency / 200) * 200;
-
- /* set card freq (if not muted) */
- if (fmr2->curvol && !fmr2->mute) {
- mutex_lock(&fmr2->lock);
- fmr2_setfreq(fmr2);
- mutex_unlock(&fmr2->lock);
- }
- return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
-{
- struct fmr2 *fmr2 = video_drvdata(file);
-
- if (f->tuner != 0)
- return -EINVAL;
- f->type = V4L2_TUNER_RADIO;
- f->frequency = fmr2->curfreq;
- return 0;
-}
+static struct snd_tea575x_ops fmr2_tea_ops = {
+ .set_pins = fmr2_tea575x_set_pins,
+ .get_pins = fmr2_tea575x_get_pins,
+ .set_direction = fmr2_tea575x_set_direction,
+};
-static int vidioc_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc)
-{
- struct fmr2 *fmr2 = video_drvdata(file);
+/* TC9154A/PT2254A volume control */
- switch (qc->id) {
- case V4L2_CID_AUDIO_MUTE:
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
- case V4L2_CID_AUDIO_VOLUME:
- /* Only card_type == 11 implements volume */
- if (fmr2->card_type == 11)
- return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0);
- return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
+/* 18-bit shift register bit definitions */
+#define TC9154A_ATT_MAJ_0DB (1 << 0)
+#define TC9154A_ATT_MAJ_10DB (1 << 1)
+#define TC9154A_ATT_MAJ_20DB (1 << 2)
+#define TC9154A_ATT_MAJ_30DB (1 << 3)
+#define TC9154A_ATT_MAJ_40DB (1 << 4)
+#define TC9154A_ATT_MAJ_50DB (1 << 5)
+#define TC9154A_ATT_MAJ_60DB (1 << 6)
+
+#define TC9154A_ATT_MIN_0DB (1 << 7)
+#define TC9154A_ATT_MIN_2DB (1 << 8)
+#define TC9154A_ATT_MIN_4DB (1 << 9)
+#define TC9154A_ATT_MIN_6DB (1 << 10)
+#define TC9154A_ATT_MIN_8DB (1 << 11)
+/* bit 12 is ignored */
+#define TC9154A_CHANNEL_LEFT (1 << 13)
+#define TC9154A_CHANNEL_RIGHT (1 << 14)
+/* bits 15, 16, 17 must be 0 */
+
+#define TC9154A_ATT_MAJ(x) (1 << x)
+#define TC9154A_ATT_MIN(x) (1 << (7 + x))
+
+static void tc9154a_set_pins(struct fmr2 *fmr2, u8 pins)
+{
+ if (!fmr2->tea.mute)
+ pins |= STR_WREN;
+
+ outb(pins, fmr2->io);
+}
+
+static void tc9154a_set_volume(struct fmr2 *fmr2, int volume)
+{
+ int i;
+ u32 reg;
+ u8 bit;
+
+ reg = TC9154A_ATT_MAJ(volume / 10) | TC9154A_ATT_MIN((volume % 10) / 2);
+ reg |= TC9154A_CHANNEL_LEFT | TC9154A_CHANNEL_RIGHT;
+ /* write 18-bit shift register, LSB first */
+ for (i = 0; i < 18; i++) {
+ bit = reg & (1 << i) ? PT_DATA : 0;
+ tc9154a_set_pins(fmr2, bit);
+ udelay(5);
+ tc9154a_set_pins(fmr2, bit | PT_CK);
+ udelay(5);
+ tc9154a_set_pins(fmr2, bit);
+ }
+
+ /* latch register data */
+ udelay(5);
+ tc9154a_set_pins(fmr2, PT_ST);
+ udelay(5);
+ tc9154a_set_pins(fmr2, 0);
+}
+
+static struct v4l2_queryctrl fmr2_volume_qctrl[] = {
+ {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = -68,
+ .maximum = 0,
+ .step = 2,
+ .default_value = -68,
+ .type = V4L2_CTRL_TYPE_INTEGER,
}
- return -EINVAL;
-}
+};
-static int vidioc_g_ctrl(struct file *file, void *priv,
+static int fmr2_g_extra_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
- struct fmr2 *fmr2 = video_drvdata(file);
+ struct snd_tea575x *tea = video_drvdata(file);
+ struct fmr2 *fmr2 = tea->private_data;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value = fmr2->mute;
- return 0;
case V4L2_CID_AUDIO_VOLUME:
- ctrl->value = fmr2->curvol;
+ ctrl->value = fmr2->volume;
return 0;
}
+
return -EINVAL;
}
-static int vidioc_s_ctrl(struct file *file, void *priv,
+static int fmr2_s_extra_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
- struct fmr2 *fmr2 = video_drvdata(file);
+ struct snd_tea575x *tea = video_drvdata(file);
+ struct fmr2 *fmr2 = tea->private_data;
switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- fmr2->mute = ctrl->value;
- break;
case V4L2_CID_AUDIO_VOLUME:
- fmr2->curvol = ctrl->value;
- break;
- default:
- return -EINVAL;
+ fmr2->volume = ctrl->value;
+ tc9154a_set_volume(fmr2, fmr2->volume);
+ return 0;
}
-#ifdef DEBUG
- if (fmr2->curvol && !fmr2->mute)
- printk(KERN_DEBUG "unmute\n");
- else
- printk(KERN_DEBUG "mute\n");
-#endif
-
- mutex_lock(&fmr2->lock);
- if (fmr2->curvol && !fmr2->mute) {
- fmr2_setvolume(fmr2);
- /* Set frequency and unmute card */
- fmr2_setfreq(fmr2);
- } else
- fmr2_mute(fmr2->io);
- mutex_unlock(&fmr2->lock);
- return 0;
-}
-
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
- *i = 0;
- return 0;
-}
-
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
- return i ? -EINVAL : 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *priv,
- struct v4l2_audio *a)
-{
- a->index = 0;
- strlcpy(a->name, "Radio", sizeof(a->name));
- a->capability = V4L2_AUDCAP_STEREO;
- return 0;
-}
-
-static int vidioc_s_audio(struct file *file, void *priv,
- struct v4l2_audio *a)
-{
- return a->index ? -EINVAL : 0;
+ return -EINVAL;
}
-static const struct v4l2_file_operations fmr2_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
- .vidioc_querycap = vidioc_querycap,
- .vidioc_g_tuner = vidioc_g_tuner,
- .vidioc_s_tuner = vidioc_s_tuner,
- .vidioc_g_audio = vidioc_g_audio,
- .vidioc_s_audio = vidioc_s_audio,
- .vidioc_g_input = vidioc_g_input,
- .vidioc_s_input = vidioc_s_input,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
- .vidioc_queryctrl = vidioc_queryctrl,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
-};
-
static int __init fmr2_init(void)
{
struct fmr2 *fmr2 = &fmr2_card;
- struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev;
- int res;
- strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name));
- fmr2->io = io;
- fmr2->stereo = 1;
- mutex_init(&fmr2->lock);
+ fmr2->io = FMR2_PORT;
- if (!request_region(fmr2->io, 2, "sf16fmr2")) {
- v4l2_err(v4l2_dev, "request_region failed!\n");
+ if (!request_region(fmr2->io, 2, "SF16-FMR2")) {
+ printk(KERN_ERR "I/O port 0x%x already in use\n", fmr2->io);
return -EBUSY;
}
- res = v4l2_device_register(NULL, v4l2_dev);
- if (res < 0) {
+ fmr2->tea.private_data = fmr2;
+ fmr2->tea.ops = &fmr2_tea_ops;
+ strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card));
+ strcpy(fmr2->tea.bus_info, "ISA");
+
+ if (snd_tea575x_init(&fmr2->tea)) {
+ printk(KERN_ERR "Unable to detect TEA575x tuner\n");
release_region(fmr2->io, 2);
- v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
- return res;
+ return -ENODEV;
}
- strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name));
- fmr2->vdev.v4l2_dev = v4l2_dev;
- fmr2->vdev.fops = &fmr2_fops;
- fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops;
- fmr2->vdev.release = video_device_release_empty;
- video_set_drvdata(&fmr2->vdev, fmr2);
-
- /* mute card - prevents noisy bootups */
- fmr2_mute(fmr2->io);
- fmr2_product_info(fmr2);
-
- if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(fmr2->io, 2);
- return -EINVAL;
+ if (inb(fmr2->io) & FMR2_HASVOL) {
+ fmr2->tea.extra_ctrls = fmr2_volume_qctrl;
+ fmr2->tea.num_extra_ctrls = 1;
+ fmr2->tea.g_extra_ctrl = fmr2_g_extra_ctrl;
+ fmr2->tea.s_extra_ctrl = fmr2_s_extra_ctrl;
}
- v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
- debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
+ printk(KERN_INFO "SF16-FMR2 radio card at 0x%x.\n", fmr2->io);
return 0;
}
@@ -443,22 +208,9 @@ static void __exit fmr2_exit(void)
{
struct fmr2 *fmr2 = &fmr2_card;
- video_unregister_device(&fmr2->vdev);
- v4l2_device_unregister(&fmr2->v4l2_dev);
+ snd_tea575x_exit(&fmr2->tea);
release_region(fmr2->io, 2);
}
module_init(fmr2_init);
module_exit(fmr2_exit);
-
-#ifndef MODULE
-
-static int __init fmr2_setup_io(char *str)
-{
- get_option(&str, &io);
- return 1;
-}
-
-__setup("sf16fmr2=", fmr2_setup_io);
-
-#endif
--
Ondrej Zary
