August 2009 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC updates for 2.6.32
by Mark Brown 10 Aug '09

10 Aug '09

The following changes since commit b7b8f9bf0cd73b90561e8123fd5ec28f4539c419: Janusz Krzysztofik (1): TTY/ASoC: Rename N_AMSDELTA line discipline to N_V253 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.32 Chaithrika U S (1): ASoC: DaVinci: Support Audio on DA830 EVM Mark Brown (3): ASoC: Convert WM8776 to use factored out register cache code ASoC: Define more formats for the AC97 CODECs ASoC: Drop unneeded declaration of removed wm8731 SPI write function Uwe Kleine-König (1): ASoC: s3c2443-ac97: convert semaphore to mutex include/sound/soc-dai.h | 8 ++++- sound/soc/codecs/wm8731.c | 3 -- sound/soc/codecs/wm8776.c | 59 +++++++------------------------------ sound/soc/davinci/Kconfig | 11 +++++++ sound/soc/davinci/Makefile | 1 + sound/soc/davinci/davinci-evm.c | 33 +++++++++++++++++++++ sound/soc/s3c24xx/s3c2443-ac97.c | 10 +++--- 7 files changed, 68 insertions(+), 57 deletions(-)

2 1

[alsa-devel] load_for_all_cards bug
by Kevin Goodsell 10 Aug '09

10 Aug '09

(I originally tried to send this via the moderator without subscribing to the list, but it never went through and I never received a moderator response. Apparently this list is set up as moderated, but nobody is actually moderating it.) Summary: load_for_all_cards fails with existing configuration elements In snd_config_hook_load_for_all_cards, the first call to snd_config_search attempts to locate an existing configuration node with the name of the driver. Typically none is found, and everything is good. However, if such a node is located, the next line assumes it is a leaf node with type 'string' and calls snd_config_get_string to fetch the string value. If this fails, the entire hook is abandoned. Because of this, setting something like the following in asoundrc: cards.<driver name>.foo 0 is sufficient to disable the entire card-specific configuration. As a concrete example, I have a HDA-Intel sound card. dmix.conf includes a way to set period_size, period_time, and periods by using configuration elements of the form cards.<driver name>.pcm.dmix.<var>. In ~/.asoundrc I add cards.HDA-Intel.pcm.dmix.period_size 1024 This will cause HDA-Intel.conf to fail to load, and the pcm defined in default.conf will fail to find the device-specific pcm cards.HDA-Intel.pcm.default, and fall back on the default pcm using plughw. By attempting to configure dmix, I have disabled it. Fixing this may just be a matter of changing the line in snd_config_hook_load_for_all_cards from: if (snd_config_search(root, fdriver, &n) >= 0) { to: if (snd_config_search(root, fdriver, &n) >= 0 && n->type != SND_CONFIG_TYPE_COMPOUND) { I have not tested this. -Kevin

2 1

[alsa-devel] [RFC][PATCH 0/3] Enhance ASoC on OMAP1510 by implementing DMA channel linking
by Janusz Krzysztofik 10 Aug '09

10 Aug '09

Current implementation of ASoC OMAP PCM makes use of DMA channel self linking feature for all machines but OMAP1510. This is caused by channel linking not supported on OMAP1510 in current OMAP DMA implementation. Instead, DMA interrputs are counted as periods, and after all periods in a buffer has been detected, DMA transfer is started again for a new buffer content. The period counter is also used as a software replacement for a hardware DMA progress counter that has been found unusable on OMAP1510 in case of playback. In my attempts to debug random PCM hangups, I was wondering what could happen if a single interrupt was missing, ie. the period index was not incremented for a period. It seems that the transfer would just hang after the current buffer processed, as DMA would not be started again, waiting for a missing period. Furthermore, software calculated PCM pointer accuracy can suffer from missing DMA interrupts. Even if OMAP1510 DMA hardware does not support channel linking in a way like newer models do, it has some other features that could be used for the purpose. Interrupt status flags, passed to OMAP PCM interrupt handler routine, can be used to get more accurate DMA progress counter software calculation. Even if these enhancements did not help me in eliminating random PCM hangups completely, I find them worth of sharing. There are three patches in the series: [RFC][PATCH 1/3] ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 [RFC][PATCH 2/3] ASoC: OMAP: Make use of DMA channel self linking on OMAP1510 [RFC][PATCH 3/3] ASoC: OMAP: Enhance OMAP1510 DMA progress software counter Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl>

1 0

[alsa-devel] alsamixer -a basic
by Elimar Riesebieter 10 Aug '09

10 Aug '09

alsa-lib 1.0.20 running alsamixer -a basic gives: ALSA lib python.c:991:(alsa_mixer_simple_finit) Unable to find python module '/usr/lib/alsa-lib/smixer/python/main.py' How do I build smixer/python/main.py ? Elimar -- On the keyboard of life you have always to keep a finger at the escape key;-)

2 1

Re: [alsa-devel] [Pkg-alsa-devel] Bug#539454: libasound2: Division by zero in pcm_rate.c when period_size->min == 0
by Elimar Riesebieter 10 Aug '09

10 Aug '09

forwarded 539454 alsa-devel(a)alsa-project.org tags 539454 + patch thanks Hi, this is Debian bug 539454. It would be better to fix it in general. Patching the Debian Package isn't a reasonable solution. Thanks Elimar * John Lindgren [090731 22:29 -0400] > Package: libasound2 > Version: 1.0.20-2 > Severity: important > Tags: patch > > > System: Dell Inspiron 1200 > Card: Intel ICH6 > Chip: SigmaTel STAC9752,53 > > > Steps to reproduce: > > 1. Disable dmix: mv /usr/share/alsa/cards/ICH4.conf /usr/share/alsa/cards/ICH4.conf.0 > 2. Restart ALSA: /etc/rcS.d/S50alsa-utils restart > 3. Clear Audacity configuration: rm -r ~/.audacity* > 4. Run Audacity 1.3.7-3 in Valgrind: valgrind --tool=none audacity > 5. Choose "OK" in the "Audacity First Run" dialog. > > > Valgrind output: > > ==26237== Process terminating with default action of signal 8 (SIGFPE) > ==26237== Integer divide by zero at address 0x64D1CD56 > ==26237== at 0x4CAD600: snd_pcm_rate_hw_refine_cchange (pcm_rate.c:189) > ==26237== by 0x4C97B2E: snd1_pcm_hw_refine_slave (pcm_params.c:2182) > ==26237== by 0x4CAD7D5: snd_pcm_rate_hw_refine (pcm_rate.c:222) > ==26237== by 0x4C96015: snd_pcm_hw_refine (pcm_params.c:2264) > ==26237== by 0x4CA116B: snd1_pcm_generic_hw_refine (pcm_generic.c:98) > ==26237== by 0x4C97B0D: snd1_pcm_hw_refine_slave (pcm_params.c:2158) > ==26237== by 0x4CC0E25: snd_pcm_lfloat_hw_refine (pcm_lfloat.c:261) > ==26237== by 0x4C96015: snd_pcm_hw_refine (pcm_params.c:2264) > ==26237== by 0x4C99068: sndrv_pcm_hw_params (pcm_params.c:2290) > ==26237== by 0x4CB209C: snd_pcm_plug_hw_params (pcm_plug.c:1045) > ==26237== by 0x4C9921D: sndrv_pcm_hw_params (pcm_params.c:2299) > ==26237== by 0x4C947B0: snd_pcm_hw_params (pcm.c:822) > > > Diagnosis: > > pcm_rate.c:189 reads: > > if ((buffer_size->min / period_size->min) * period_size->min == buffer_size->min) { > > When using the ICH4 driver without dmix, period_size->min == 0. Handle > this by changing pcm_rate.c:189 to: > > if (period_size->min > 0 && (buffer_size->min / period_size->min) * period_size->min == buffer_size->min) { > > With this change, Audacity starts without problems. Patch against native 1.0.20: diff -Naurd a/src/pcm/pcm_rate.c b/src/pcm/pcm_rate.c --- a/src/pcm/pcm_rate.c 2009-05-06 09:07:23.000000000 +0200 +++ b/src/pcm/pcm_rate.c 2009-08-06 21:34:23.000000000 +0200 @@ -186,7 +186,7 @@ if (!snd_interval_checkempty(period_size) && period_size->openmin && period_size->openmax && period_size->min + 1 == period_size->max) { - if ((buffer_size->min / period_size->min) * period_size->min == buffer_size->min) { + if (period_size->min > 0 && (buffer_size->min / period_size->min) * period_size->min == buffer_size->min) { snd_interval_set_value(period_size, period_size->min); } else if ((buffer_size->max / period_size->max) * period_size->max == buffer_size->max) { snd_interval_set_value(period_size, period_size->max); -- Experience is something you don't get until just after you need it!

2 1

[alsa-devel] [BUG] NULL pointer dereference in patch_sigmatel.c
by Ozan Çağlayan 10 Aug '09

10 Aug '09

Hi, One of our users is having a NULL ptr dereference upon loading the snd_hda_intel module with 20090624's snapshot. There's only one commit after that date in patch_sigmatel.c so I didn't tell him to try with the latest snapshot but if you think that the bug may be related to another part of the ALSA codebase, I can make him try the latest snapshot. I'm attaching the alsa-info output on a working system with 1.0.18a. The kernel version in subject is 2.6.25.20. Thanks, Ozan ------------------------ First the BUG's trace: ------------------------ BUG: unable to handle kernel NULL pointer dereference at 00000074 IP: [<f8cdb83a>] :snd_hda_codec_idt:stac92xx_add_jack+0x84/0x9e *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: snd_hda_codec_idt snd_hda_intel(+) snd_hda_codec aes_i586 aes_generic ipv6 af_packet bridge bnep rfcomm l2cap microcode acpi_cpufreq cpufreq_powersave cpufreq_userspace cpufreq_conservative ndiswrapper vboxdrv pcmcia snd_hwdep rtc_cmos rtc_core yenta_socket tpm_infineon snd_seq_dummy rtc_lib tpm snd_seq_oss rsrc_nonstatic tpm_bios tifm_7xx1 iTCO_wdt snd_seq_midi_event tifm_core i2c_i801 snd_seq iTCO_vendor_support pcmcia_core r5u870 arc4 joydev snd_seq_device snd_pcm_oss nvidia(P) battery sg usbcam snd_mixer_oss ecb ac videobuf_dma_sg videobuf_core sony_laptop snd_pcm uvcvideo iwl4965 video compat_ioctl32 snd_timer output hci_usb iwlcore videodev thermal bluetooth snd processor v4l1_compat rfkill button led_class soundcore firmware_class snd_page_alloc mac80211 intel_agp i2c_core sky2 cfg80211 agpgart ext3 jbd mbcache sr_mod cdrom sd_mod ata_piix uhci_hcd pata_acpi ehci_hcd usbcore ohci1394 ieee1394 ata_generic libata scsi_mod dock Pid: 1977, comm: modprobe Tainted: P (2.6.25.20-114 #1) EIP: 0060:[<f8cdb83a>] EFLAGS: 00210206 CPU: 0 EIP is at stac92xx_add_jack+0x84/0x9e [snd_hda_codec_idt] EAX: 00000000 EBX: f8c7973e ECX: 00000004 EDX: f8cdeb1a ESI: 03211020 EDI: f675c600 EBP: f68d7d20 ESP: f68d7cd4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 1977, ti=f68d6000 task=f69ece60 task.ti=f68d6000) Stack: f68d7cf4 f8cdeb0a f8c796d5 f8c7973e f8c79793 00000001 000a69e0 f8c79793 4f205048 61207475 78452074 654c2074 4a207466 006b6361 f6898800 f6898800 00000000 f6898800 f6898800 f68d7d4c f8cdbac0 f65ef000 f6970000 00000001 Call Trace: [<f8cdbac0>] ? stac92xx_build_controls+0x26c/0x2d0 [snd_hda_codec_idt] [<f8c73aa9>] ? snd_hda_codec_build_controls+0x31/0x3d [snd_hda_codec] [<f8c750d3>] ? snd_hda_build_controls+0x18/0x67 [snd_hda_codec] [<f8c69138>] ? azx_probe+0x79e/0x840 [snd_hda_intel] [<f8c68857>] ? azx_send_cmd+0x0/0x101 [snd_hda_intel] [<f8c686a6>] ? azx_get_response+0x0/0x1b1 [snd_hda_intel] [<f8c67ece>] ? azx_attach_pcm_stream+0x0/0x15c [snd_hda_intel] [<f8c67b84>] ? azx_bus_reset+0x0/0x56 [snd_hda_intel] [<f8c67a40>] ? azx_power_notify+0x0/0x57 [snd_hda_intel] [<c01e7a37>] ? pci_device_probe+0x39/0x59 [<c024395f>] ? driver_probe_device+0xa0/0x136 [<c0243a50>] ? __driver_attach+0x5b/0x91 [<c024333c>] ? bus_for_each_dev+0x3b/0x63 [<c0243804>] ? driver_attach+0x14/0x16 [<c02439f5>] ? __driver_attach+0x0/0x91 [<c0242d3a>] ? bus_add_driver+0x9d/0x1ba [<c0243bc4>] ? driver_register+0x47/0xa7 [<c0168681>] ? __vunmap+0x93/0x9b [<c01e7bec>] ? __pci_register_driver+0x35/0x61 [<f8afd017>] ? alsa_card_azx_init+0x17/0x19 [snd_hda_intel] [<c0141f9c>] ? sys_init_module+0x18ad/0x19ca [<c0109c77>] ? do_syscall_trace+0x138/0x17f [<c0104a2e>] ? syscall_call+0x7/0xb ======================= Code: f9 ff 89 45 d0 89 f0 e8 29 68 f9 ff 89 c3 89 f0 e8 32 68 f9 ff ff 75 d0 53 50 68 0a eb cd f8 8d 45 d4 50 e8 45 25 50 c7 8b 47 08 <89> 78 74 8b 47 08 83 c4 14 c7 40 78 7f a2 cd f8 31 c0 8d 65 f4 EIP: [<f8cdb83a>] stac92xx_add_jack+0x84/0x9e [snd_hda_codec_idt] SS:ESP 0068:f68d7cd4 ---[ end trace 4a628a5b4fc302e7 ]--- alsa-info output: ------------------- upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.52 !!################################ !!Script ran on: Sun Feb 8 19:15:27 EET 2009 !!Linux Distribution !!------------------ Pardus 2008.2 Canis aureus !!Kernel Information !!------------------ Kernel release: 2.6.25.20-114 Operating System: GNU/Linux Architecture: i686 Processor: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18a Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfc300000 irq 21 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:284b (rev 03) Subsystem: 104d:9008 !!Modprobe options (Sound related) !!-------------------------------- snd-hda-intel: model=vaio !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> index : -1,-1,-1,-1,-1,-1,-1,-1 model : vaio,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> position_fix : 0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: SigmaTel STAC9872AK Address: 0 Vendor Id: 0x83847662 Subsystem Id: 0x104d1e00 Revision Id: 0x100201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=5, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x07 Processing caps: benign=0, ncoeff=0 Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x0e Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x09 Processing caps: benign=0, ncoeff=0 Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Amp-In caps: N/A Amp-In vals: [0x0d 0x0d] Connection: 1 0x15 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x03211020: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x80: HP VREF_HIZ Unsolicited: tag=04, enabled=1 Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x03a15030: [Jack] Mic at Ext Left Conn = 1/8, Color = Red DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x05 Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x3e0]: 44100 48000 88200 96000 176400 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 2 0x10* 0x09 Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Connection: 1 0x13 Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Delay: 4 samples Connection: 1 0x18 Node 0x14 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x90a7013e: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0xe Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1 Amp-Out vals: [0x00 0x00] Connection: 4 0x0a 0x0d 0x14* 0x02 Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono Volume-Knob: delta=1, steps=127, direct=0, val=127 Connection: 4 0x02* 0x03 0x04 0x05 Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 Delay: 4 samples Codec: Conexant ID 2c06 Address: 1 Vendor Id: 0x14f12c06 Subsystem Id: 0x104d1700 Revision Id: 0x100000 Modem Function Group: 0x2 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 0 Şub 8 2009 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 4 Şub 8 2009 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 5 Şub 8 2009 /dev/snd/hwC0D1 crw-rw----+ 1 root audio 116, 24 Şub 8 19:14 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 16 Şub 8 19:15 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 1 Şub 8 2009 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Şub 8 2009 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # PulseAudio plugin configuration # Let's create a virtual device "pulse" for mixer and PCM pcm.pulse { type pulse hint { description "PulseAudio Sound Server" } } ctl.pulse { type pulse hint { description "PulseAudio Sound Server" } } # Let's make it the default! pcm.!default { type pulse hint { description "Default" } } ctl.!default { type pulse hint { description "Default" } } !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Card hw:0 'Intel'/'HDA Intel at 0xfc300000 irq 21' Mixer name : 'SigmaTel STAC9872AK' Components : 'HDA:83847662,104d1e00,00100201 HDA:14f12c06,104d1700,00100000' Controls : 10 Simple ctrls : 7 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 127 Mono: Playback 127 [100%] [0.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 127 [100%] [0.00dB] [on] Front Right: Playback 127 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 255 Mono: Capture [off] Front Left: Playback 0 [0%] [-51.00dB] Front Right: Playback 0 [0%] [-51.00dB] Simple mixer control 'Mic Jack',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 13 [87%] [19.50dB] [on] Front Right: Capture 13 [87%] [19.50dB] [on] Simple mixer control 'Internal Mic',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 127 [100%] [0.00dB] [on] Front Right: Playback 127 [100%] [0.00dB] [on] !!Alsactl output !!------------- --startcollapse-- state.Intel { control.1 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 127' comment.dbmin -9525 comment.dbmax 0 iface MIXER name 'Headphone Playback Volume' value.0 127 value.1 127 } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true } control.3 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 127' comment.dbmin -9525 comment.dbmax 0 iface MIXER name 'Speaker Playback Volume' value.0 127 value.1 127 } control.4 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true } control.5 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 15' comment.dbmin 0 comment.dbmax 2250 iface MIXER name 'Capture Volume' value.0 13 value.1 13 } control.6 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' value.0 true value.1 true } control.7 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 'Mic Jack' comment.item.1 'Internal Mic' comment.item.2 PCM iface MIXER name 'Capture Source' value 'Internal Mic' } control.8 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 127' comment.dbmin -9525 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value 127 } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Playback Switch' value true } control.10 { comment.access 'read write user' comment.type INTEGER comment.count 2 comment.range '0 - 255' comment.tlv '0000000100000008ffffec1400000014' comment.dbmin -5100 comment.dbmax 0 iface MIXER name 'PCM Playback Volume' value.0 0 value.1 0 } } --endcollapse-- !!All Loaded Modules !!------------------ Module aes_i586 aes_generic ipv6 bridge bnep af_packet rfcomm l2cap microcode acpi_cpufreq cpufreq_powersave cpufreq_userspace ndiswrapper r5u870 usbcam videobuf_dma_sg snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event videobuf_core nvidia snd_seq uvcvideo snd_seq_device snd_pcm_oss arc4 compat_ioctl32 ecb snd_mixer_oss intel_agp snd_pcm iwl4965 snd_timer snd_page_alloc snd_hwdep snd pcmcia hci_usb rtc_cmos bluetooth yenta_socket rsrc_nonstatic tpm_infineon pcmcia_core tifm_7xx1 sky2 battery videodev iTCO_wdt agpgart ac thermal processor iwlcore rfkill led_class firmware_class i2c_i801 mac80211 video output tpm tpm_bios rtc_core rtc_lib joydev iTCO_vendor_support tifm_core sony_laptop v4l1_compat i2c_core sg button soundcore cfg80211 ext3 jbd mbcache sr_mod cdrom sd_mod ata_piix ohci1394 ieee1394 uhci_hcd pata_acpi ata_generic libata scsi_mod dock ehci_hcd usbcore

3 24

[alsa-devel] [PATCH 1/2] ASoC: DaVinci: McASP driver enhacements
by Chaithrika U S 10 Aug '09

10 Aug '09

On DA830/OMAPL137 SoC, the McASP peripheral has internal FIFO support. It provides additional data buffering. It also provides tolerance to vairiation in host/DMA controller response times. The read and write FIFO sizes are 256 bytes each. If FIFO is enabled, the DMA events from McASP are sent to the FIFO which inturn sends DMA requests to the host CPU according to the thresholds programmed. More details of the FIFO operation can be found at http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber= sprufm1&fileType=pdf This patch adds support for FIFO configuration.The platform member has a version field which differentiates the McASP on different SoCs. The patch also adds another DAI format to the driver. Signed-off-by: Chaithrika U S <chaithrika(a)ti.com> --- sound/soc/davinci/davinci-mcasp.c | 113 ++++++++++++++++++++++++++++++++++-- sound/soc/davinci/davinci-mcasp.h | 5 ++ sound/soc/davinci/davinci-pcm.c | 4 +- sound/soc/davinci/davinci-pcm.h | 1 + 4 files changed, 115 insertions(+), 8 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index f0c0347..eca22d7 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -102,6 +102,11 @@ /* Receive Buffer for Serializer n */ #define DAVINCI_MCASP_RXBUF_REG 0x280 +/* McASP FIFO Registers */ +#define DAVINCI_MCASP_WFIFOCTL (0x1010) +#define DAVINCI_MCASP_WFIFOSTS (0x1014) +#define DAVINCI_MCASP_RFIFOCTL (0x1018) +#define DAVINCI_MCASP_RFIFOSTS (0x101C) /* * DAVINCI_MCASP_PWREMUMGT_REG - Power Down and Emulation Management @@ -276,6 +281,13 @@ */ #define TXDATADMADIS BIT(0) +/* + * DAVINCI_MCASP_W[R]FIFOCTL - Write/Read FIFO Control Register bits + */ +#define FIFO_ENABLE BIT(16) +#define NUMEVT_MASK (0xFF << 8) +#define NUMDMA_MASK (0xFF) + #define DAVINCI_MCASP_NUM_SERIALIZER 16 static inline void mcasp_set_bits(void __iomem *reg, u32 val) @@ -345,6 +357,9 @@ static void mcasp_start_rx(struct davinci_audio_dev *dev) static void mcasp_start_tx(struct davinci_audio_dev *dev) { + u8 offset = 0, i; + u32 cnt; + mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXHCLKRST); mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXCLKRST); mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSERCLR); @@ -353,6 +368,19 @@ static void mcasp_start_tx(struct davinci_audio_dev *dev) mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSMRST); mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXFSRST); mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0); + for (i = 0; i < dev->num_serializer; i++) { + if (dev->serial_dir[i] == TX_MODE) { + offset = i; + break; + } + } + + /* wait for TX ready */ + cnt = 0; + while (!(mcasp_get_reg(dev->base + DAVINCI_MCASP_XRSRCTL_REG(offset)) & + TXSTATE) && (cnt < 100000)) + cnt++; + mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0); } @@ -362,6 +390,13 @@ static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream) mcasp_start_tx(dev); else mcasp_start_rx(dev); + + /* enable FIFO */ + if (dev->txnumevt) + mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); + + if (dev->rxnumevt) + mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); } static void mcasp_stop_rx(struct davinci_audio_dev *dev) @@ -382,6 +417,13 @@ static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream) mcasp_stop_tx(dev); else mcasp_stop_rx(dev); + + /* disable FIFO */ + if (dev->txnumevt) + mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); + + if (dev->rxnumevt) + mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); } static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai, @@ -401,7 +443,16 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai, mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x7 << 26)); break; + case SND_SOC_DAIFMT_CBM_CFS: + /* codec is clock master and frame slave */ + mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE); + mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE); + mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE); + mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE); + + mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x2d << 26)); + break; case SND_SOC_DAIFMT_CBM_CFM: /* codec is clock and frame master */ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE); @@ -505,6 +556,8 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream) { int i; + u8 tx_ser = 0; + u8 rx_ser = 0; /* Default configuration */ mcasp_set_bits(dev->base + DAVINCI_MCASP_PWREMUMGT_REG, MCASP_SOFT); @@ -525,12 +578,37 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream) for (i = 0; i < dev->num_serializer; i++) { mcasp_set_bits(dev->base + DAVINCI_MCASP_XRSRCTL_REG(i), dev->serial_dir[i]); - if (dev->serial_dir[i] == TX_MODE) + if (dev->serial_dir[i] == TX_MODE) { mcasp_set_bits(dev->base + DAVINCI_MCASP_PDIR_REG, AXR(i)); - else if (dev->serial_dir[i] == RX_MODE) + tx_ser++; + } else if (dev->serial_dir[i] == RX_MODE) { mcasp_clr_bits(dev->base + DAVINCI_MCASP_PDIR_REG, AXR(i)); + rx_ser++; + } + } + + if (dev->txnumevt && stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (dev->txnumevt * tx_ser > 64) + dev->txnumevt = 1; + + mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, tx_ser, + NUMDMA_MASK); + mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, + ((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK); + mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); + } + + if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) { + if (dev->rxnumevt * rx_ser > 64) + dev->rxnumevt = 1; + + mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, rx_ser, + NUMDMA_MASK); + mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, + ((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK); + mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); } } @@ -543,6 +621,8 @@ static void davinci_hw_param(struct davinci_audio_dev *dev, int stream) for (i = 0; i < active_slots; i++) mask |= (1 << i); + mcasp_clr_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG, TX_ASYNC); + if (stream == SNDRV_PCM_STREAM_PLAYBACK) { /* bit stream is MSB first with no delay */ /* DSP_B mode */ @@ -622,8 +702,16 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, struct davinci_pcm_dma_params *dma_params = dev->dma_params[substream->stream]; int word_length; + u8 numevt; davinci_hw_common_param(dev, substream->stream); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + numevt = dev->txnumevt; + else + numevt = dev->rxnumevt; + + if (!numevt) + numevt = 1; if (dev->op_mode == DAVINCI_MCASP_DIT_MODE) davinci_hw_dit_param(dev); @@ -650,6 +738,13 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, printk(KERN_WARNING "davinci-mcasp: unsupported PCM format"); return -EINVAL; } + + if (dev->version == MCASP_VERSION_2) { + dma_params->data_type *= numevt; + dma_params->acnt = 4 * numevt; + } else + dma_params->acnt = dma_params->data_type; + davinci_config_channel_size(dev, word_length); return 0; @@ -778,6 +873,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev) dev->num_serializer = pdata->num_serializer; dev->serial_dir = pdata->serial_dir; dev->codec_fmt = pdata->codec_fmt; + dev->version = pdata->version; + dev->txnumevt = pdata->txnumevt; + dev->rxnumevt = pdata->rxnumevt; dma_data[count].name = "I2S PCM Stereo out"; dma_data[count].eventq_no = pdata->eventq_no; @@ -807,9 +905,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev) } dma_data[count].channel = res->start; - davinci_mcasp_dai[pdev->id].private_data = dev; - davinci_mcasp_dai[pdev->id].dev = &pdev->dev; - ret = snd_soc_register_dai(&davinci_mcasp_dai[pdev->id]); + davinci_mcasp_dai[pdata->op_mode].private_data = dev; + davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev; + ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]); if (ret != 0) goto err_release_region; @@ -827,12 +925,13 @@ err_release_dev: static int davinci_mcasp_remove(struct platform_device *pdev) { + struct snd_platform_data *pdata = pdev->dev.platform_data; struct davinci_pcm_dma_params *dma_data; struct davinci_audio_dev *dev; struct resource *mem; - snd_soc_unregister_dai(&davinci_mcasp_dai[pdev->id]); - dev = davinci_mcasp_dai[pdev->id].private_data; + snd_soc_unregister_dai(&davinci_mcasp_dai[pdata->op_mode]); + dev = davinci_mcasp_dai[pdata->op_mode].private_data; clk_disable(dev->clk); clk_put(dev->clk); dev->clk = NULL; diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h index 36b7104..554354c 100644 --- a/sound/soc/davinci/davinci-mcasp.h +++ b/sound/soc/davinci/davinci-mcasp.h @@ -50,6 +50,11 @@ struct davinci_audio_dev { u8 op_mode; u8 num_serializer; u8 *serial_dir; + u8 version; + + /* McASP FIFO related */ + u8 txnumevt; + u8 rxnumevt; }; #endif /* DAVINCI_MCASP_H */ diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index 8fd0c3c..1e2dfd0 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -67,6 +67,7 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) dma_addr_t src, dst; unsigned short src_bidx, dst_bidx; unsigned int data_type; + unsigned short acnt; unsigned int count; period_size = snd_pcm_lib_period_bytes(substream); @@ -91,11 +92,12 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) dst_bidx = data_type; } + acnt = prtd->params->acnt; edma_set_src(lch, src, INCR, W8BIT); edma_set_dest(lch, dst, INCR, W8BIT); edma_set_src_index(lch, src_bidx, 0); edma_set_dest_index(lch, dst_bidx, 0); - edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC); + edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC); prtd->period++; if (unlikely(prtd->period >= runtime->periods)) diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h index eb4287f..63d9625 100644 --- a/sound/soc/davinci/davinci-pcm.h +++ b/sound/soc/davinci/davinci-pcm.h @@ -19,6 +19,7 @@ struct davinci_pcm_dma_params { char *name; /* stream identifier */ int channel; /* sync dma channel ID */ + unsigned short acnt; dma_addr_t dma_addr; /* device physical address for DMA */ enum dma_event_q eventq_no; /* event queue number */ unsigned char data_type; /* xfer data type */ -- 1.5.6

4 4

[alsa-devel] ASoC: PCM formats for AC97
by Jon Smirl 09 Aug '09

09 Aug '09

Tell me if this is right and I'll do a patch.... ----------------------------------------------------------- The current mpc5200 code has: static const struct snd_pcm_hardware psc_dma_hardware = { .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, struct snd_soc_dai psc_ac97_dai[] = { { .playback = { .formats = SNDRV_PCM_FMTBIT_S32_BE, I think I have this backwards, the ac97 driver can take 8/16/24/32 it's the Bestcomm program that doesn't know about anything except 32b. So if we wrote new Bestcomm programs that expanded bytes from memory out into 32b DMA register writes, we could support 8/16b formats. The correct formats would be: static const struct snd_pcm_hardware psc_dma_hardware = { .formats = SNDRV_PCM_FMTBIT_S32_BE, struct snd_soc_dai psc_ac97_dai[] = { { .playback = { .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, After implementing new Bestcomm programs.... static const struct snd_pcm_hardware psc_dma_hardware = { .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, ----------------------------------------------------------- A related issue in soc-dai.h: #define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S32_LE |\ SNDRV_PCM_FMTBIT_S32_BE) shouldn't this be #define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16 |\ SNDRV_PCM_FMTBIT_S32) The first form says the AC97 hardware can take both endians, but it doesn't take both endians it takes the endian matching the machine it is attached to. Don't the standard AC97 formats also include 8 and 24b? -- Jon Smirl jonsmirl(a)gmail.com

3 6

[alsa-devel] Testers wanted: New SB X-Fi driver
by Frashman 09 Aug '09

09 Aug '09

Hi Takashi, first of all, thank you for developing this driver. I tested it today. It works, so far. But two annoying things. As you mentioned, I got problems, if the onboard sound modules are loaded. Then i get no sound out auf my xfi. If I disable the loading of snd-hda-intel modules while booting, then it works. The second problem is, that SIDE and SURROUND connectors are interchanged. I'm absolutly sure, it works fine under windows and the connector colors are also correct. If I run speaker-test -c8 the SIDE Speakers sounds come out of my REAR (SURROUND) Speakers, while nothing is coming out of my rear speakers, if i'm using speaker-test -c6 Here lspci: $ lspci 00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part 00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) 00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) 00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 02:00.0 Audio device: Creative Labs X-Fi Titanium series [EMU20k2] (rev 03) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 04:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 04:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) Thank you so far, Frashman

7 33

[alsa-devel] Auzentech X-Fi Prelude with alsa drivers
by Adrian Patzak 09 Aug '09

09 Aug '09

Dear sirs, I've got a Auzentech X-Fi Prelude and I installed the alsa unstable snapshot drivers. Stereo sound for my headphones and ditital output are working fine but my microphone isn't recording anything. I was checking the mixer settings but i wasn't able to find something wrong. Are the x-fi drivers just not designed to fit with the Auzentech card or do i have a local configuration problem? The output of alsa-info.sh script is attached. Thanking you in anticipation for any answer. upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.57 !!################################ !!Script ran on: Fri Aug 7 10:48:57 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04" !!DMI Information !!--------------- Manufacturer: FUJITSU SIEMENS Product Name: AMD690VM-FMH !!Kernel Information !!------------------ Kernel release: 2.6.28-14-generic Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.20 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_ctxfi !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [XFi ]: SB-XFi - Creative X-Fi Creative X-Fi 20K1 Unknown !!PCI Soundcards installed in the system !!-------------------------------------- 03:01.0 Multimedia audio controller: Creative Labs SB X-Fi !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 03:01.0 0401: 1102:0005 Subsystem: 415a:0034 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_ctxfi enable : Y,Y,Y,Y,Y,Y,Y,Y id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> index : -1,-1,-1,-1,-1,-1,-1,-1 multiple : 2 reference_rate : 48000 use_system_timer : N !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 0 Aug 7 08:13 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 24 Aug 7 12:02 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 16 Aug 7 12:02 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 17 Aug 7 08:13 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 18 Aug 7 08:13 /dev/snd/pcmC0D2p crw-rw----+ 1 root audio 116, 19 Aug 7 08:13 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 20 Aug 7 08:13 /dev/snd/pcmC0D4p crw-rw----+ 1 root audio 116, 33 Aug 7 08:13 /dev/snd/timer !!Aplay/Arecord output !!------------ APLAY E: core-util.c: Home directory /home/adrian not ours. **** List of PLAYBACK Hardware Devices **** card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: XFi [Creative X-Fi], device 1: ctxfi [Surround] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: XFi [Creative X-Fi], device 2: ctxfi [Center/LFE] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: XFi [Creative X-Fi], device 3: ctxfi [Side] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD E: core-util.c: Home directory /home/adrian not ours. **** List of CAPTURE Hardware Devices **** card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [XFi] Card hw:0 'XFi'/'Creative X-Fi 20K1 Unknown' Mixer name : '20K1' Components : '' Controls : 30 Simple ctrls : 11 Simple mixer control 'Master',0 Capabilities: pvolume cvolume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 256 Capture 0 - 256 Front Left: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] Front Right: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] Simple mixer control 'PCM',0 Capabilities: pvolume cvolume cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 256 Capture 0 - 256 Front Left: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] [off] Simple mixer control 'Front',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 256 Mono: Front Left: Playback 256 [100%] [0.00dB] [on] Front Right: Playback 256 [100%] [0.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 256 Mono: Front Left: Playback 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] [off] Simple mixer control 'Center/LFE',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 256 Mono: Front Left: Playback 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] [off] Simple mixer control 'Side',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 256 Mono: Front Left: Playback 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] [off] Simple mixer control 'Line-in',0 Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 256 Capture 0 - 256 Front Left: Playback 256 [100%] [0.00dB] [off] Capture 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] [off] Capture 256 [100%] [0.00dB] [off] Simple mixer control 'Mic',0 Capabilities: pvolume cvolume cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 256 Capture 0 - 256 Front Left: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] [on] Front Right: Playback 256 [100%] [0.00dB] Capture 256 [100%] [0.00dB] [on] Simple mixer control 'Digit-IO',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'S/PDIF-in',0 Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 256 Capture 0 - 256 Front Left: Playback 256 [100%] [0.00dB] [off] Capture 256 [100%] [0.00dB] [off] Front Right: Playback 256 [100%] [0.00dB] [off] Capture 256 [100%] [0.00dB] [off] Simple mixer control 'S/PDIF-out',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 256 Mono: Front Left: Playback 256 [100%] [0.00dB] [on] Front Right: Playback 256 [100%] [0.00dB] [on] !!Alsactl output !!------------- --startcollapse-- state.XFi { control.1 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value.0 256 value.1 256 } control.2 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'PCM Playback Volume' value.0 256 value.1 256 } control.3 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Line-in Playback Volume' value.0 256 value.1 256 } control.4 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Mic Playback Volume' value.0 256 value.1 256 } control.5 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'S/PDIF-in Playback Volume' value.0 256 value.1 256 } control.6 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'S/PDIF-out Playback Volume' value.0 256 value.1 256 } control.7 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Front Playback Volume' value.0 256 value.1 256 } control.8 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Surround Playback Volume' value.0 256 value.1 256 } control.9 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Center/LFE Playback Volume' value.0 256 value.1 256 } control.10 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Side Playback Volume' value.0 256 value.1 256 } control.11 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Master Capture Volume' value.0 256 value.1 256 } control.12 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'PCM Capture Volume' value.0 256 value.1 256 } control.13 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Line-in Capture Volume' value.0 256 value.1 256 } control.14 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Mic Capture Volume' value.0 256 value.1 256 } control.15 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 256' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'S/PDIF-in Capture Volume' value.0 256 value.1 256 } control.16 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'PCM Capture Switch' value false } control.17 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line-in Capture Switch' value false } control.18 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Capture Switch' value true } control.19 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'S/PDIF-in Capture Switch' value false } control.20 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line-in Playback Switch' value false } control.21 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'S/PDIF-out Playback Switch' value true } control.22 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'S/PDIF-in Playback Switch' value false } control.23 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Front Playback Switch' value true } control.24 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Surround Playback Switch' value false } control.25 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Center/LFE Playback Switch' value false } control.26 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Side Playback Switch' value false } control.27 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Digit-IO Playback Switch' value true } control.28 { comment.access read comment.type IEC958 comment.count 1 iface PCM device 4 name 'IEC958 Playback Mask' value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 } control.29 { comment.access 'read write' comment.type IEC958 comment.count 1 iface PCM device 4 name 'IEC958 Playback Default' value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.30 { comment.access 'read write' comment.type IEC958 comment.count 1 iface PCM device 4 name 'IEC958 Playback PCM Stream' value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } } --endcollapse-- !!All Loaded Modules !!------------------ Module nls_iso8859_1 nls_cp437 vfat fat binfmt_misc ppdev bridge stp bnep video output input_polldev sbp2 lp parport joydev snd_ctxfi snd_pcm snd_timer snd usbhid i2c_piix4 soundcore snd_page_alloc psmouse serio_raw usblp pcspkr nvidia usb_storage ohci1394 ieee1394 r8169 mii fbcon tileblit font bitblit softcursor !!ALSA/HDA dmesg !!------------------

1 0