October 2009 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 9/30] ALSA: HDA VIA: Rewrite via_independent_hp_put
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Rewrite via_independent_hp_put Use hp_independent_mode_index to store hp index, and simplify function via_independent_hp_put with it. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 87 ++++++++++++++++++++++++++++------------------------ 1 file changed, 47 insertions(+), 40 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -252,6 +252,7 @@ /* HP mode source */ const struct hda_input_mux *hp_mux; unsigned int hp_independent_mode; + unsigned int hp_independent_mode_index; enum VIA_HDA_CODEC codec_type; @@ -584,6 +585,36 @@ } } +static int update_side_mute_status(struct hda_codec *codec) +{ + /* mute side channel */ + struct via_spec *spec = codec->spec; + unsigned int parm = spec->hp_independent_mode + ? AMP_OUT_MUTE : AMP_OUT_UNMUTE; + hda_nid_t sw3; + + switch (spec->codec_type) { + case VT1708: + sw3 = 0x1b; + break; + case VT1709_10CH: + sw3 = 0x29; + break; + case VT1708B_8CH: + case VT1708S: + sw3 = 0x27; + break; + default: + sw3 = 0; + break; + } + + if (sw3) + snd_hda_codec_write(codec, sw3, 0, AC_VERB_SET_AMP_GAIN_MUTE, + parm); + return 0; +} + static int via_independent_hp_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -591,47 +622,18 @@ struct via_spec *spec = codec->spec; hda_nid_t nid = spec->autocfg.hp_pins[0]; unsigned int pinsel = ucontrol->value.enumerated.item[0]; - unsigned int con_nid = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONNECT_LIST, 0) & 0xff; - - if (con_nid == spec->multiout.hp_nid) { - if (pinsel == 0) { - if (!spec->hp_independent_mode) { - if (spec->multiout.num_dacs > 1) - spec->multiout.num_dacs -= 1; - spec->hp_independent_mode = 1; - } - } else if (pinsel == 1) { - if (spec->hp_independent_mode) { - if (spec->multiout.num_dacs > 1) - spec->multiout.num_dacs += 1; - spec->hp_independent_mode = 0; - } - } - } else { - if (pinsel == 0) { - if (spec->hp_independent_mode) { - if (spec->multiout.num_dacs > 1) - spec->multiout.num_dacs += 1; - spec->hp_independent_mode = 0; - } - } else if (pinsel == 1) { - if (!spec->hp_independent_mode) { - if (spec->multiout.num_dacs > 1) - spec->multiout.num_dacs -= 1; - spec->hp_independent_mode = 1; - } - } - } - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, - pinsel); - - if (spec->multiout.hp_nid && - spec->multiout.hp_nid != spec->multiout.dac_nids[HDA_FRONT]) - snd_hda_codec_setup_stream(codec, - spec->multiout.hp_nid, - 0, 0, 0); + /* Get Independent Mode index of headphone pin widget */ + spec->hp_independent_mode = spec->hp_independent_mode_index == pinsel + ? 1 : 0; + + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, pinsel); + + if (spec->multiout.hp_nid && spec->multiout.hp_nid + != spec->multiout.dac_nids[HDA_FRONT]) + snd_hda_codec_setup_stream(codec, spec->multiout.hp_nid, + 0, 0, 0); + update_side_mute_status(codec); /* update HP volume/swtich active state */ if (spec->codec_type == VT1708S || spec->codec_type == VT1702) { @@ -1447,6 +1449,7 @@ return 0; spec->multiout.hp_nid = VT1708_HP_NID; /* AOW3 */ + spec->hp_independent_mode_index = 1; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Headphone Playback Volume", @@ -1981,6 +1984,7 @@ spec->multiout.hp_nid = VT1709_HP_DAC_NID; else if (spec->multiout.num_dacs == 3) /* 6 channels */ spec->multiout.hp_nid = 0; + spec->hp_independent_mode_index = 1; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Headphone Playback Volume", @@ -2540,6 +2544,7 @@ return 0; spec->multiout.hp_nid = VT1708B_HP_NID; /* AOW3 */ + spec->hp_independent_mode_index = 1; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Headphone Playback Volume", @@ -3010,6 +3015,7 @@ return 0; spec->multiout.hp_nid = VT1708S_HP_NID; /* AOW3 */ + spec->hp_independent_mode_index = 1; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Headphone Playback Volume", @@ -3367,6 +3373,7 @@ if (!pin) return 0; spec->multiout.hp_nid = 0x1D; + spec->hp_independent_mode_index = 0; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Headphone Playback Volume",

1 0

[alsa-devel] [PATCH 8/30] ALSA: HDA VIA: Change VT1708S & VT1702 hp mode controls
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Change VT1708S & VT1702 hp mode controls For VT1708S and VT1702, deactivate "Headphone Playback Volume" and "Headphone Playback Mute" control if "Independent HP" mode is OFF. and rename VT1702 "Independent HP" text. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 38 ++++++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -572,6 +572,18 @@ return 0; } +static void activate_ctl(struct hda_codec *codec, const char *name, int active) +{ + struct snd_kcontrol *ctl = snd_hda_find_mixer_ctl(codec, name); + if (ctl) { + ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + ctl->vd[0].access |= active + ? 0 : SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(codec->bus->card, + SNDRV_CTL_EVENT_MASK_VALUE, &ctl->id); + } +} + static int via_independent_hp_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -620,6 +632,14 @@ spec->multiout.hp_nid, 0, 0, 0); + /* update HP volume/swtich active state */ + if (spec->codec_type == VT1708S + || spec->codec_type == VT1702) { + activate_ctl(codec, "Headphone Playback Volume", + spec->hp_independent_mode); + activate_ctl(codec, "Headphone Playback Switch", + spec->hp_independent_mode); + } return 0; } @@ -3341,11 +3361,11 @@ static int vt1702_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin) { - int err; - + int err, i; + struct hda_input_mux *imux; + static const char *texts[] = { "ON", "OFF", NULL}; if (!pin) return 0; - spec->multiout.hp_nid = 0x1D; err = via_add_control(spec, VIA_CTL_WIDGET_VOL, @@ -3360,8 +3380,18 @@ if (err < 0) return err; - create_hp_imux(spec); + imux = &spec->private_imux[1]; + /* for hp mode select */ + i = 0; + while (texts[i] != NULL) { + imux->items[imux->num_items].label = texts[i]; + imux->items[imux->num_items].index = i; + imux->num_items++; + i++; + } + + spec->hp_mux = &spec->private_imux[1]; return 0; }

1 0

[alsa-devel] [PATCH 7/30] ALSA: HDA VIA: Remove unused argument of via_new_analog_input
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Remove unused argument of via_new_analog_input Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -317,8 +317,8 @@ } /* create input playback/capture controls for the given pin */ -static int via_new_analog_input(struct via_spec *spec, hda_nid_t pin, - const char *ctlname, int idx, int mix_nid) +static int via_new_analog_input(struct via_spec *spec, const char *ctlname, + int idx, int mix_nid) { char name[32]; int err; @@ -1480,8 +1480,7 @@ idx = 1; break; } - err = via_new_analog_input(spec, cfg->input_pins[i], labels[i], - idx, 0x17); + err = via_new_analog_input(spec, labels[i], idx, 0x17); if (err < 0) return err; imux->items[imux->num_items].label = labels[i]; @@ -2013,8 +2012,7 @@ idx = 1; break; } - err = via_new_analog_input(spec, cfg->input_pins[i], labels[i], - idx, 0x18); + err = via_new_analog_input(spec, labels[i], idx, 0x18); if (err < 0) return err; imux->items[imux->num_items].label = labels[i]; @@ -2575,8 +2573,7 @@ idx = 1; break; } - err = via_new_analog_input(spec, cfg->input_pins[i], labels[i], - idx, 0x16); + err = via_new_analog_input(spec, labels[i], idx, 0x16); if (err < 0) return err; imux->items[imux->num_items].label = labels[i]; @@ -3047,8 +3044,7 @@ idx = 1; break; } - err = via_new_analog_input(spec, cfg->input_pins[i], labels[i], - idx, 0x16); + err = via_new_analog_input(spec, labels[i], idx, 0x16); if (err < 0) return err; imux->items[imux->num_items].label = labels[i]; @@ -3401,8 +3397,7 @@ idx = 3; break; } - err = via_new_analog_input(spec, cfg->input_pins[i], - labels[i], idx, 0x1A); + err = via_new_analog_input(spec, labels[i], idx, 0x1A); if (err < 0) return err; imux->items[imux->num_items].label = labels[i];

1 0

[alsa-devel] [PATCH 6/30] ALSA: HDA VIA: Add low current mode for power saving.
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Add low current mode for power saving. For VT1708B, VT1708S and VT1702, enter low current mode if no analog stream is opened and all aa path mute. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 41 +++++++++++++++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 6 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -783,6 +783,10 @@ struct snd_pcm_substream *substream) { struct via_spec *spec = codec->spec; + int idle = substream->pstr->substream_opened == 1 + && substream->ref_count == 0; + + analog_low_current_mode(codec, idle); return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream, hinfo); } @@ -1089,6 +1093,11 @@ if (err < 0) return err; } + + /* init power states */ + set_jack_power_state(codec); + analog_low_current_mode(codec, 1); + via_free_kctls(codec); /* no longer needed */ return 0; } @@ -2311,6 +2320,17 @@ { } }; +static int via_pcm_open_close(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + int idle = substream->pstr->substream_opened == 1 + && substream->ref_count == 0; + + analog_low_current_mode(codec, idle); + return 0; +} + static struct hda_pcm_stream vt1708B_8ch_pcm_analog_playback = { .substreams = 2, .channels_min = 2, @@ -2319,7 +2339,8 @@ .ops = { .open = via_playback_pcm_open, .prepare = via_playback_multi_pcm_prepare, - .cleanup = via_playback_multi_pcm_cleanup + .cleanup = via_playback_multi_pcm_cleanup, + .close = via_pcm_open_close }, }; @@ -2341,8 +2362,10 @@ .channels_max = 2, .nid = 0x13, /* NID to query formats and rates */ .ops = { + .open = via_pcm_open_close, .prepare = via_capture_pcm_prepare, - .cleanup = via_capture_pcm_cleanup + .cleanup = via_capture_pcm_cleanup, + .close = via_pcm_open_close }, }; @@ -2799,7 +2822,8 @@ .ops = { .open = via_playback_pcm_open, .prepare = via_playback_pcm_prepare, - .cleanup = via_playback_pcm_cleanup + .cleanup = via_playback_pcm_cleanup, + .close = via_pcm_open_close }, }; @@ -2809,8 +2833,10 @@ .channels_max = 2, .nid = 0x13, /* NID to query formats and rates */ .ops = { + .open = via_pcm_open_close, .prepare = via_capture_pcm_prepare, - .cleanup = via_capture_pcm_cleanup + .cleanup = via_capture_pcm_cleanup, + .close = via_pcm_open_close }, }; @@ -3235,7 +3261,8 @@ .ops = { .open = via_playback_pcm_open, .prepare = via_playback_multi_pcm_prepare, - .cleanup = via_playback_multi_pcm_cleanup + .cleanup = via_playback_multi_pcm_cleanup, + .close = via_pcm_open_close }, }; @@ -3245,8 +3272,10 @@ .channels_max = 2, .nid = 0x12, /* NID to query formats and rates */ .ops = { + .open = via_pcm_open_close, .prepare = via_capture_pcm_prepare, - .cleanup = via_capture_pcm_cleanup + .cleanup = via_capture_pcm_cleanup, + .close = via_pcm_open_close }, };

1 0

[alsa-devel] [PATCH 5/30] ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control type
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control type Enter low power state if AA-Path volume is muted. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 240 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 239 insertions(+), 1 deletion(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -128,6 +128,7 @@ enum { VIA_CTL_WIDGET_VOL, VIA_CTL_WIDGET_MUTE, + VIA_CTL_WIDGET_ANALOG_MUTE, }; enum { @@ -177,9 +178,34 @@ return 0; } +static void analog_low_current_mode(struct hda_codec *codec, int stream_idle); +static void set_jack_power_state(struct hda_codec *codec); + +static int analog_input_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int change = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + + set_jack_power_state(codec); + analog_low_current_mode(snd_kcontrol_chip(kcontrol), -1); + return change; +} + +/* modify .put = snd_hda_mixer_amp_switch_put */ +#define ANALOG_INPUT_MUTE \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = NULL, \ + .index = 0, \ + .info = snd_hda_mixer_amp_switch_info, \ + .get = snd_hda_mixer_amp_switch_get, \ + .put = analog_input_switch_put, \ + .private_value = HDA_COMPOSE_AMP_VAL(0, 3, 0, 0) } + static struct snd_kcontrol_new vt1708_control_templates[] = { HDA_CODEC_VOLUME(NULL, 0, 0, 0), HDA_CODEC_MUTE(NULL, 0, 0, 0), + ANALOG_INPUT_MUTE, }; @@ -303,7 +329,7 @@ if (err < 0) return err; sprintf(name, "%s Playback Switch", ctlname); - err = via_add_control(spec, VIA_CTL_WIDGET_MUTE, name, + err = via_add_control(spec, VIA_CTL_WIDGET_ANALOG_MUTE, name, HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT)); if (err < 0) return err; @@ -362,6 +388,131 @@ } } + +static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid, + unsigned int *affected_parm) +{ + unsigned parm; + unsigned def_conf = snd_hda_codec_get_pincfg(codec, nid); + unsigned no_presence = (def_conf & AC_DEFCFG_MISC) + >> AC_DEFCFG_MISC_SHIFT + & AC_DEFCFG_MISC_NO_PRESENCE; /* do not support pin sense */ + unsigned present = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_SENSE, 0) >> 31; + + if ((no_presence || present) && get_defcfg_connect(def_conf) + != AC_JACK_PORT_NONE) { + *affected_parm = AC_PWRST_D0; /* if it's connected */ + parm = AC_PWRST_D0; + } else + parm = AC_PWRST_D3; + + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, parm); +} + +static void set_jack_power_state(struct hda_codec *codec) +{ + struct via_spec *spec = codec->spec; + int imux_is_smixer; + unsigned int parm; + + if (spec->codec_type == VT1702) { + imux_is_smixer = snd_hda_codec_read( + codec, 0x13, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 3; + /* inputs */ + /* PW 1/2/5 (14h/15h/18h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x14, &parm); + set_pin_power_state(codec, 0x15, &parm); + set_pin_power_state(codec, 0x18, &parm); + if (imux_is_smixer) + parm = AC_PWRST_D0; /* SW0 = stereo mixer (idx 3) */ + /* SW0 (13h), AIW 0/1/2 (12h/1fh/20h) */ + snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x12, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_POWER_STATE, + parm); + + /* outputs */ + /* PW 3/4 (16h/17h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x16, &parm); + set_pin_power_state(codec, 0x17, &parm); + /* MW0 (1ah), AOW 0/1 (10h/1dh) */ + snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_POWER_STATE, + imux_is_smixer ? AC_PWRST_D0 : parm); + snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x1d, 0, AC_VERB_SET_POWER_STATE, + parm); + } else if (spec->codec_type == VT1708B_8CH + || spec->codec_type == VT1708B_4CH + || spec->codec_type == VT1708S) { + /* SW0 (17h) = stereo mixer */ + int is_8ch = spec->codec_type != VT1708B_4CH; + imux_is_smixer = snd_hda_codec_read( + codec, 0x17, 0, AC_VERB_GET_CONNECT_SEL, 0x00) + == ((spec->codec_type == VT1708S) ? 5 : 0); + /* inputs */ + /* PW 1/2/5 (1ah/1bh/1eh) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x1a, &parm); + set_pin_power_state(codec, 0x1b, &parm); + set_pin_power_state(codec, 0x1e, &parm); + if (imux_is_smixer) + parm = AC_PWRST_D0; + /* SW0 (17h), AIW 0/1 (13h/14h) */ + snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_POWER_STATE, + parm); + + /* outputs */ + /* PW0 (19h), SW1 (18h), AOW1 (11h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x19, &parm); + snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE, + parm); + snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, + parm); + + /* PW6 (22h), SW2 (26h), AOW2 (24h) */ + if (is_8ch) { + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x22, &parm); + snd_hda_codec_write(codec, 0x26, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x24, 0, + AC_VERB_SET_POWER_STATE, parm); + } + + /* PW 3/4/7 (1ch/1dh/23h) */ + parm = AC_PWRST_D3; + /* force to D0 for internal Speaker */ + set_pin_power_state(codec, 0x1c, &parm); + set_pin_power_state(codec, 0x1d, &parm); + if (is_8ch) + set_pin_power_state(codec, 0x23, &parm); + /* MW0 (16h), Sw3 (27h), AOW 0/3 (10h/25h) */ + snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_POWER_STATE, + imux_is_smixer ? AC_PWRST_D0 : parm); + snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, + parm); + if (is_8ch) { + snd_hda_codec_write(codec, 0x25, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x27, 0, + AC_VERB_SET_POWER_STATE, parm); + } + } +} + /* * input MUX handling */ @@ -504,6 +655,93 @@ }, { } /* end */ }; + +/* check AA path's mute statue */ +static int is_aa_path_mute(struct hda_codec *codec) +{ + int mute = 1; + hda_nid_t nid_mixer; + int start_idx; + int end_idx; + int i; + struct via_spec *spec = codec->spec; + /* get nid of MW0 and start & end index */ + switch (spec->codec_type) { + case VT1708B_8CH: + case VT1708B_4CH: + case VT1708S: + nid_mixer = 0x16; + start_idx = 2; + end_idx = 4; + break; + case VT1702: + nid_mixer = 0x1a; + start_idx = 1; + end_idx = 3; + break; + default: + return 0; + } + /* check AA path's mute status */ + for (i = start_idx; i <= end_idx; i++) { + unsigned int con_list = snd_hda_codec_read( + codec, nid_mixer, 0, AC_VERB_GET_CONNECT_LIST, i/4*4); + int shift = 8 * (i % 4); + hda_nid_t nid_pin = (con_list & (0xff << shift)) >> shift; + unsigned int defconf = snd_hda_codec_get_pincfg(codec, nid_pin); + if (get_defcfg_connect(defconf) == AC_JACK_PORT_COMPLEX) { + /* check mute status while the pin is connected */ + int mute_l = snd_hda_codec_amp_read(codec, nid_mixer, 0, + HDA_INPUT, i) >> 7; + int mute_r = snd_hda_codec_amp_read(codec, nid_mixer, 1, + HDA_INPUT, i) >> 7; + if (!mute_l || !mute_r) { + mute = 0; + break; + } + } + } + return mute; +} + +/* enter/exit analog low-current mode */ +static void analog_low_current_mode(struct hda_codec *codec, int stream_idle) +{ + struct via_spec *spec = codec->spec; + static int saved_stream_idle = 1; /* saved stream idle status */ + int enable = is_aa_path_mute(codec); + unsigned int verb = 0; + unsigned int parm = 0; + + if (stream_idle == -1) /* stream status did not change */ + enable = enable && saved_stream_idle; + else { + enable = enable && stream_idle; + saved_stream_idle = stream_idle; + } + + /* decide low current mode's verb & parameter */ + switch (spec->codec_type) { + case VT1708B_8CH: + case VT1708B_4CH: + verb = 0xf70; + parm = enable ? 0x02 : 0x00; /* 0x02: 2/3x, 0x00: 1x */ + break; + case VT1708S: + verb = 0xf73; + parm = enable ? 0x51 : 0xe1; /* 0x51: 4/28x, 0xe1: 1x */ + break; + case VT1702: + verb = 0xf73; + parm = enable ? 0x01 : 0x1d; /* 0x01: 4/40x, 0x1d: 1x */ + break; + default: + return; /* other codecs are not supported */ + } + /* send verb */ + snd_hda_codec_write(codec, codec->afg, 0, verb, parm); +} + /* * generic initialization of ADC, input mixers and output mixers */

1 0

[alsa-devel] [PATCH 4/30] ALSA: HDA VIA: Limit VT1702 AA-Path max volume
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Limit VT1702 AA-Path max volume according to customer request, VT1702 AA-Path max volume (12 dB) is too high, so limit to 0 dB. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -3165,6 +3165,12 @@ err = vt1702_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]); if (err < 0) return err; + /* limit AA path volume to 0 dB */ + snd_hda_override_amp_caps(codec, 0x1A, HDA_INPUT, + (0x17 << AC_AMPCAP_OFFSET_SHIFT) | + (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | + (0x5 << AC_AMPCAP_STEP_SIZE_SHIFT) | + (1 << AC_AMPCAP_MUTE_SHIFT)); err = vt1702_auto_create_analog_input_ctls(spec, &spec->autocfg); if (err < 0) return err;

1 0

[alsa-devel] [PATCH 3/30] ALSA: HDA VIA: Add VT1708B-CE codec support.
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Add VT1708B-CE codec support. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -84,6 +84,7 @@ VT1708B_8CH, VT1708B_4CH, VT1708S, + VT1708BCE, VT1702, CODEC_TYPES, }; @@ -104,9 +105,11 @@ codec_type = VT1709_10CH; else if (dev_id >= 0xe714 && dev_id <= 0xe717) codec_type = VT1709_6CH; - else if (dev_id >= 0xe720 && dev_id <= 0xe723) + else if (dev_id >= 0xe720 && dev_id <= 0xe723) { codec_type = VT1708B_8CH; - else if (dev_id >= 0xe724 && dev_id <= 0xe727) + if (snd_hda_param_read(codec, 0x16, AC_PAR_CONNLIST_LEN) == 0x7) + codec_type = VT1708BCE; + } else if (dev_id >= 0xe724 && dev_id <= 0xe727) codec_type = VT1708B_4CH; else if ((dev_id & 0xfff) == 0x397 && (dev_id >> 12) < 8) @@ -224,6 +227,8 @@ const struct hda_input_mux *hp_mux; unsigned int hp_independent_mode; + enum VIA_HDA_CODEC codec_type; + #ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_loopback_check loopback; #endif @@ -979,6 +984,10 @@ for (i = 0; i < spec->num_iverbs; i++) snd_hda_sequence_write(codec, spec->init_verbs[i]); + spec->codec_type = get_codec_type(codec); + if (spec->codec_type == VT1708BCE) + spec->codec_type = VT1708S; /* VT1708BCE & VT1708S are almost + same */ /* Lydia Add for EAPD enable */ if (!spec->dig_in_nid) { /* No Digital In connection */ if (spec->dig_in_pin) { @@ -2368,12 +2377,14 @@ { } /* end */ }; #endif - +static int patch_vt1708S(struct hda_codec *codec); static int patch_vt1708B_8ch(struct hda_codec *codec) { struct via_spec *spec; int err; + if (get_codec_type(codec) == VT1708BCE) + return patch_vt1708S(codec); /* create a codec specific record */ spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -2905,6 +2916,16 @@ spec->loopback.amplist = vt1708S_loopbacks; #endif + /* correct names for VT1708BCE */ + if (get_codec_type(codec) == VT1708BCE) { + kfree(codec->chip_name); + codec->chip_name = kstrdup("VT1708BCE", GFP_KERNEL); + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); + spec->stream_name_analog = "VT1708BCE Analog"; + spec->stream_name_digital = "VT1708BCE Digital"; + } return 0; }

1 0

[alsa-devel] [PATCH 2/30] HDA VIA: Change get_codec_type argument to hda_codec type
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Change get_codec_type argument to hda_codec type Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -88,8 +88,9 @@ CODEC_TYPES, }; -static enum VIA_HDA_CODEC get_codec_type(u32 vendor_id) +static enum VIA_HDA_CODEC get_codec_type(struct hda_codec *codec) { + u32 vendor_id = codec->vendor_id; u16 ven_id = vendor_id >> 16; u16 dev_id = vendor_id & 0xffff; enum VIA_HDA_CODEC codec_type; @@ -141,7 +142,7 @@ struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = get_amp_nid(kcontrol); - if (get_codec_type(codec->vendor_id) == VT1708S + if (get_codec_type(codec) == VT1708S && (nid == 0x1a || nid == 0x1e)) { if (size < 4 * sizeof(unsigned int)) return -ENOMEM; @@ -163,7 +164,7 @@ struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = get_amp_nid(kcontrol); - if (get_codec_type(codec->vendor_id) == VT1708S + if (get_codec_type(codec) == VT1708S && (nid == 0x1a || nid == 0x1e)) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 2;

1 0

[alsa-devel] [PATCH 1/30] ALSA: HDA VIA: Remove unused IS_VT17xx_VENDORID macro
by LoganLi＠viatech.com.cn 09 Oct '09

09 Oct '09

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: HDA VIA: Remove unused IS_VT17xx_VENDORID macro IS_VT17*_VENDORID macros are used nowhere, so clean them up. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> --- pci/hda/patch_via.c | 8 -------- 1 file changed, 8 deletions(-) --- a/pci/hda/patch_via.c +++ b/pci/hda/patch_via.c @@ -76,14 +76,6 @@ #define VT1702_HP_NID 0x17 #define VT1702_DIGOUT_NID 0x11 -#define IS_VT1708_VENDORID(x) ((x) >= 0x11061708 && (x) <= 0x1106170b) -#define IS_VT1709_10CH_VENDORID(x) ((x) >= 0x1106e710 && (x) <= 0x1106e713) -#define IS_VT1709_6CH_VENDORID(x) ((x) >= 0x1106e714 && (x) <= 0x1106e717) -#define IS_VT1708B_8CH_VENDORID(x) ((x) >= 0x1106e720 && (x) <= 0x1106e723) -#define IS_VT1708B_4CH_VENDORID(x) ((x) >= 0x1106e724 && (x) <= 0x1106e727) -#define IS_VT1708S_VENDORID(x) ((x) >= 0x11060397 && (x) <= 0x11067397) -#define IS_VT1702_VENDORID(x) ((x) >= 0x11060398 && (x) <= 0x11067398) - enum VIA_HDA_CODEC { UNKNOWN = -1, VT1708,

1 0

[alsa-devel] [PATCH 1/31] HDA patch_via.c: Remove IS_VT17xx_VENDORID macro
by Li Bo 09 Oct '09

09 Oct '09

[ALSA] HDA VIA: Remove IS_VT17xx_VENDORID macro Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Index: sound-2.6/sound/pci/hda/patch_via.c =================================================================== --- sound-2.6.orig/sound/pci/hda/patch_via.c 2009-09-29 18:01:12.000000000 +0800 +++ sound-2.6/sound/pci/hda/patch_via.c 2009-09-29 18:01:16.000000000 +0800 @@ -76,14 +76,6 @@ #define VT1702_HP_NID 0x17 #define VT1702_DIGOUT_NID 0x11 -#define IS_VT1708_VENDORID(x) ((x) >= 0x11061708 && (x) <= 0x1106170b) -#define IS_VT1709_10CH_VENDORID(x) ((x) >= 0x1106e710 && (x) <= 0x1106e713) -#define IS_VT1709_6CH_VENDORID(x) ((x) >= 0x1106e714 && (x) <= 0x1106e717) -#define IS_VT1708B_8CH_VENDORID(x) ((x) >= 0x1106e720 && (x) <= 0x1106e723) -#define IS_VT1708B_4CH_VENDORID(x) ((x) >= 0x1106e724 && (x) <= 0x1106e727) -#define IS_VT1708S_VENDORID(x) ((x) >= 0x11060397 && (x) <= 0x11067397) -#define IS_VT1702_VENDORID(x) ((x) >= 0x11060398 && (x) <= 0x11067398) - enum VIA_HDA_CODEC { UNKNOWN = -1, VT1708,

3 13