October 2009 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] sscape: make more code __devinit and other improvements
by krzysztof.h1＠poczta.fm 08 Oct '09

08 Oct '09

"Takashi Iwai" <tiwai(a)suse.de> pisze: > At Wed, 7 Oct 2009 18:45:37 +0200, > Krzysztof Helt wrote: > > > > From: Krzysztof Helt <krzysztof.h1(a)wp.pl> > > > > Make code to upload firmware marked as __devinit. > > I guess the mark would be removed again if you implement suspend/resume > :) > If you are not going to implement PM, I'm willing to apply this patch, > though. > I haven't thought about this. Drop the patch then. > > General code and coding style improvements. > > > > Add a missing argument for CMD_XXX_MIDI_VOL command. > > > > Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> > > --- > > This is the last my patch for the sscape driver. > > > > I will examine if the OSS aedsp16 driver can be removed as well. The > corresponding > > ALSA driver is snd-sc6000. > > Yeah, that'll be nice. > > I have a strange problem. The sscape and aedsp16 drivers do not work correctly with OSS drivers (DMA/IRQ problem) but they work correctly with ALSA + OSS emulation. I will check more cards (e.g. SB16). It may a new bug in the OSS layer. Regards, Krzysztof ---------------------------------------------------------------------- Zobacz najwiekszy samolot na swiecie! Kliknij >>> http://link.interia.pl/f238f

2 1

[alsa-devel] ascenario: Second batch
by Stefan Schmidt 08 Oct '09

08 Oct '09

Hello. Two more patches for ascenario. To be applied on top of the batch from yesterday. [PATCH 1/2] ascenario: Bring back a bugfix and config token change from latest ascenario That one got missed as Jaroslav applied the initial ascenario patch. There was a later one which added this changes. [PATCH 2/2] ascenario: Reduce SND_SCN_* defines to the basics. I still need feedback here how you guys want to handle the defines. Could be seen as an RFC if you like. For the better part of the day I'm looking into some bug regarding the control_id fucntion. Hopefully another fix I can submit tomorrow. regards Stefan Schmidt

1 2

[alsa-devel] ALSA: ctxfi: Swapped SURROUND-SIDE mute
by Frank Roth 08 Oct '09

08 Oct '09

Hello, I can confirm, that this patch is working fine with 6 Speakers. Mute-/unmute and volume control of all 6 channels are working fine. I used a Soundblaster X-Fi Titanium (EMU20k2) Best regards, Frank Roth

1 0

[alsa-devel] ASoC updates for 2.6.32
by Mark Brown 08 Oct '09

08 Oct '09

The following changes since commit 2a0f5cb32772e9a9560209e241a80bfbbc31dbc3: Mark Brown (1): Merge branch 'for-2.6.32' of git://git.kernel.org/.../broonie/sound-2.6 into for-2.6.32 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.32 Mark Brown (3): ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI ASoC: WM8350 capture PGA mutes are inverted Merge branch 'upstream/wm8350' into for-2.6.32 sound/soc/codecs/wm8350.c | 4 ++-- sound/soc/imx/mxc-ssi.c | 8 -------- 2 files changed, 2 insertions(+), 10 deletions(-)

2 1

[alsa-devel] [PATCH] ice1724: increase SPDIF and independent stereo buffer sizes
by Robert Hancock 08 Oct '09

08 Oct '09

Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by: Robert Hancock <hancockrwd(a)gmail.com> diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index af6e001..3ae4407 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -1294,7 +1294,7 @@ static int __devinit snd_vt1724_pcm_spdif(struct snd_ice1712 *ice, int device) snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(ice->pci), - 64*1024, 64*1024); + 256*1024, 256*1024); ice->pcm = pcm; @@ -1408,7 +1408,7 @@ static int __devinit snd_vt1724_pcm_indep(struct snd_ice1712 *ice, int device) snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(ice->pci), - 64*1024, 64*1024); + 256*1024, 256*1024); ice->pcm_ds = pcm;

2 1

[alsa-devel] [PATCH] opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()
by Krzysztof Helt 08 Oct '09

08 Oct '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Fix following circular locking in the opl3 driver. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc3 #87 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] but task is already holding lock: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&opl3->sys_timer_lock){..-...}: [<c02461d5>] validate_chain+0xa25/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth] [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul] [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth] [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq] [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq] [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq] [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq] [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq] [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq] [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq] [<c02827b6>] vfs_write+0x96/0x160 [<c0282c9d>] sys_write+0x3d/0x70 [<c0202c45>] syscall_call+0x7/0xb -> #0 (&opl3->voice_lock){..-...}: [<c02467e6>] validate_chain+0x1036/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c02269e8>] __do_softirq+0x78/0x110 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c020328e>] common_interrupt+0x2e/0x40 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c066>] i386_start_kernel+0x66/0x70 other info that might help us debug this: 2 locks held by swapper/0: #0: (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0 #1: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87 Call Trace: [<c0245188>] print_circular_bug+0xc8/0xd0 [<c02467e6>] validate_chain+0x1036/0x1040 [<c0247f14>] ? check_usage_forwards+0x54/0xd0 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c307>] ? _spin_lock_irqsave+0x47/0x60 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth] [<c02269e8>] __do_softirq+0x78/0x110 [<c044c0fd>] ? _spin_unlock+0x1d/0x20 [<c025915f>] ? handle_level_irq+0xaf/0xe0 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180 [<c020328e>] common_interrupt+0x2e/0x40 [<c0208d88>] ? default_idle+0x38/0x50 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c210>] ? unknown_bootoption+0x0/0x210 [<c055c066>] i386_start_kernel+0x66/0x70 Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- I am not sure if this is the only possible way to fix my the problem. My idea is to change locking in the snd_opl3_timer_func() so the opl3 voices' part is locked with voice_lock and the timer's part is locked with sys_timer_lock. diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c index 6e7d09a..1e76f7b 100644 --- a/sound/drivers/opl3/opl3_midi.c +++ b/sound/drivers/opl3/opl3_midi.c @@ -29,6 +29,8 @@ extern char snd_opl3_regmap[MAX_OPL2_VOICES][4]; extern int use_internal_drums; +static void snd_opl3_note_off_unsafe(void *p, int note, int vel, + struct snd_midi_channel *chan); /* * The next table looks magical, but it certainly is not. Its values have * been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception @@ -242,16 +244,20 @@ void snd_opl3_timer_func(unsigned long data) int again = 0; int i; - spin_lock_irqsave(&opl3->sys_timer_lock, flags); + spin_lock_irqsave(&opl3->voice_lock, flags); for (i = 0; i < opl3->max_voices; i++) { struct snd_opl3_voice *vp = &opl3->voices[i]; if (vp->state > 0 && vp->note_off_check) { if (vp->note_off == jiffies) - snd_opl3_note_off(opl3, vp->note, 0, vp->chan); + snd_opl3_note_off_unsafe(opl3, vp->note, 0, + vp->chan); else again++; } } + spin_unlock_irqrestore(&opl3->voice_lock, flags); + + spin_lock_irqsave(&opl3->sys_timer_lock, flags); if (again) { opl3->tlist.expires = jiffies + 1; /* invoke again */ add_timer(&opl3->tlist); @@ -658,28 +664,22 @@ static void snd_opl3_kill_voice(struct snd_opl3 *opl3, int voice) /* * Release a note in response to a midi note off. */ -void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan) +static void snd_opl3_note_off_unsafe(void *p, int note, int vel, + struct snd_midi_channel *chan) { - struct snd_opl3 *opl3; - int voice; struct snd_opl3_voice *vp; - unsigned long flags; - - opl3 = p; + struct snd_opl3 *opl3 = p; #ifdef DEBUG_MIDI snd_printk(KERN_DEBUG "Note off, ch %i, inst %i, note %i\n", chan->number, chan->midi_program, note); #endif - spin_lock_irqsave(&opl3->voice_lock, flags); - if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) { if (chan->drum_channel && use_internal_drums) { snd_opl3_drum_switch(opl3, note, vel, 0, chan); - spin_unlock_irqrestore(&opl3->voice_lock, flags); return; } /* this loop will hopefully kill all extra voices, because @@ -697,6 +697,16 @@ void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan snd_opl3_kill_voice(opl3, voice); } } +} + +void snd_opl3_note_off(void *p, int note, int vel, + struct snd_midi_channel *chan) +{ + struct snd_opl3 *opl3 = p; + unsigned long flags; + + spin_lock_irqsave(&opl3->voice_lock, flags); + snd_opl3_note_off_unsafe(p, note, vel, chan); spin_unlock_irqrestore(&opl3->voice_lock, flags); } @@ -867,3 +877,4 @@ void snd_opl3_sysex(void *p, unsigned char *buf, int len, snd_printk(KERN_DEBUG "SYSEX\n"); #endif } + ---------------------------------------------------------------------- Nie wiesz ktory bank wybrac? Sprawdz ranking >>> http://link.interia.pl/f23b5

2 1

[alsa-devel] sscape: make more code __devinit and other improvements
by Krzysztof Helt 08 Oct '09

08 Oct '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Make code to upload firmware marked as __devinit. General code and coding style improvements. Add a missing argument for CMD_XXX_MIDI_VOL command. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- This is the last my patch for the sscape driver. I will examine if the OSS aedsp16 driver can be removed as well. The corresponding ALSA driver is snd-sc6000. diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 279be50..06aa116 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -109,14 +109,14 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #define RX_READY 0x01 #define TX_READY 0x02 -#define CMD_ACK 0x80 -#define CMD_SET_MIDI_VOL 0x84 -#define CMD_GET_MIDI_VOL 0x85 -#define CMD_XXX_MIDI_VOL 0x86 -#define CMD_SET_EXTMIDI 0x8a -#define CMD_GET_EXTMIDI 0x8b -#define CMD_SET_MT32 0x8c -#define CMD_GET_MT32 0x8d +#define CMD_ACK 0x80 +#define CMD_SET_MIDI_VOL 0x84 +#define CMD_GET_MIDI_VOL 0x85 +#define CMD_XXX_MIDI_VOL 0x86 +#define CMD_SET_EXTMIDI 0x8a +#define CMD_GET_EXTMIDI 0x8b +#define CMD_SET_MT32 0x8c +#define CMD_GET_MT32 0x8d enum GA_REG { GA_INTSTAT_REG = 0, @@ -166,10 +166,12 @@ static inline struct soundscape *get_card_soundscape(struct snd_card *c) * I think this means that the memory has to map to * contiguous pages of physical memory. */ -static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size) +static struct snd_dma_buffer __devinit *get_dmabuf(struct snd_dma_buffer *buf, + unsigned long size) { if (buf) { - if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(), + if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, + snd_dma_isa_data(), size, buf) < 0) { snd_printk(KERN_ERR "sscape: Failed to allocate " "%lu bytes for DMA\n", @@ -184,19 +186,19 @@ static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned lo /* * Release the DMA-able kernel memory ... */ -static void free_dmabuf(struct snd_dma_buffer *buf) +static void __devinit free_dmabuf(struct snd_dma_buffer *buf) { if (buf && buf->area) snd_dma_free_pages(buf); } - /* * This function writes to the SoundScape's control registers, * but doesn't do any locking. It's up to the caller to do that. * This is why this function is "unsafe" ... */ -static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val) +static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, + unsigned char val) { outb(reg, ODIE_ADDR_IO(io_base)); outb(val, ODIE_DATA_IO(io_base)); @@ -206,7 +208,8 @@ static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsign * Write to the SoundScape's control registers, and do the * necessary locking ... */ -static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val) +static void __devinit sscape_write(struct soundscape *s, enum GA_REG reg, + unsigned char val) { unsigned long flags; @@ -219,7 +222,8 @@ static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char va * Read from the SoundScape's control registers, but leave any * locking to the caller. This is why the function is "unsafe" ... */ -static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg) +static inline unsigned char sscape_read_unsafe(unsigned io_base, + enum GA_REG reg) { outb(reg, ODIE_ADDR_IO(io_base)); return inb(ODIE_DATA_IO(io_base)); @@ -248,9 +252,8 @@ static inline void set_midi_mode_unsafe(unsigned io_base) static inline int host_read_unsafe(unsigned io_base) { int data = -1; - if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) { + if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) data = inb(HOST_DATA_IO(io_base)); - } return data; } @@ -260,7 +263,7 @@ static inline int host_read_unsafe(unsigned io_base) * a limited amount of busy-waiting if the register isn't ready. * Also leaves all locking-issues to the caller ... */ -static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) +static int __devinit host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) { int data; @@ -292,7 +295,7 @@ static inline int host_write_unsafe(unsigned io_base, unsigned char data) * Also leaves all locking-issues to the caller ... */ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, - unsigned timeout) + unsigned timeout) { int err; @@ -311,7 +314,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, * * NOTE: This check is based upon observation, not documentation. */ -static inline int verify_mpu401(const struct snd_mpu401 * mpu) +static inline int verify_mpu401(const struct snd_mpu401 *mpu) { return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); } @@ -319,7 +322,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu) /* * This is apparently the standard way to initailise an MPU-401 */ -static inline void initialise_mpu401(const struct snd_mpu401 * mpu) +static inline void __devinit initialise_mpu401(const struct snd_mpu401 *mpu) { outb(0, MPU401D(mpu)); } @@ -329,9 +332,10 @@ static inline void initialise_mpu401(const struct snd_mpu401 * mpu) * The AD1845 detection fails if we *don't* do this, so I * think that this is a good idea ... */ -static inline void activate_ad1845_unsafe(unsigned io_base) +static void __devinit activate_ad1845_unsafe(unsigned io_base) { - sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10); + unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG); + sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10); sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); } @@ -350,24 +354,27 @@ static void soundscape_free(struct snd_card *c) * Tell the SoundScape to begin a DMA tranfer using the given channel. * All locking issues are left to the caller. */ -static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) +static __devinit void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) { - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01); - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) | 0x01); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) & 0xfe); } /* * Wait for a DMA transfer to complete. This is a "limited busy-wait", * and all locking issues are left to the caller. */ -static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout) +static int __devinit sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, + unsigned timeout) { while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { udelay(100); --timeout; } /* while */ - return (sscape_read_unsafe(io_base, reg) & 0x01); + return sscape_read_unsafe(io_base, reg) & 0x01; } /* @@ -377,7 +384,7 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti * This in turn means that we must not be holding any * spinlocks when we call this function. */ -static int obp_startup_ack(struct soundscape *s, unsigned timeout) +static int __devinit obp_startup_ack(struct soundscape *s, unsigned timeout) { unsigned long end_time = jiffies + msecs_to_jiffies(timeout); @@ -404,7 +411,7 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) * that we must not be holding any spinlocks when we call * this function. */ -static int host_startup_ack(struct soundscape *s, unsigned timeout) +static int __devinit host_startup_ack(struct soundscape *s, unsigned timeout) { unsigned long end_time = jiffies + msecs_to_jiffies(timeout); @@ -427,13 +434,14 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout) /* * Upload a byte-stream into the SoundScape using DMA channel A. */ -static int upload_dma_data(struct soundscape *s, - const unsigned char *data, - size_t size) +static int __devinit upload_dma_data(struct soundscape *s, + const unsigned char *data, + size_t size) { unsigned long flags; struct snd_dma_buffer dma; int ret; + unsigned char val; if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024))) return -ENOMEM; @@ -443,18 +451,21 @@ static int upload_dma_data(struct soundscape *s, /* * Reset the board ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f); /* * Enable the DMA channels and configure them ... */ - sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); + val = (s->chip->dma1 << 4) | DMA_8BIT; + sscape_write_unsafe(s->io_base, GA_DMAA_REG, val); sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); /* * Take the board out of reset ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80); /* * Upload the firmware to the SoundScape @@ -472,7 +483,7 @@ static int upload_dma_data(struct soundscape *s, sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { /* - * Don't forget to release this spinlock we're holding ... + * Don't forget to release this spinlock we're holding */ spin_unlock_irqrestore(&s->lock, flags); @@ -489,7 +500,8 @@ static int upload_dma_data(struct soundscape *s, /* * Boot the board ... (I think) */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40); spin_unlock_irqrestore(&s->lock, flags); /* @@ -523,7 +535,7 @@ _release_dma: * purpose of this block of code seems to be to tell * us which version of the microcode we should be using. */ -static int sscape_upload_bootblock(struct snd_card *card) +static int __devinit sscape_upload_bootblock(struct snd_card *card) { struct soundscape *sscape = get_card_soundscape(card); unsigned long flags; @@ -562,7 +574,7 @@ static int sscape_upload_bootblock(struct snd_card *card) /* * Upload the microcode into the SoundScape. */ -static int sscape_upload_microcode(struct snd_card *card, int version) +static int __devinit sscape_upload_microcode(struct snd_card *card, int version) { struct soundscape *sscape = get_card_soundscape(card); const struct firmware *init_fw = NULL; @@ -591,7 +603,7 @@ static int sscape_upload_microcode(struct snd_card *card, int version) * Mixer control for the SoundScape's MIDI device. */ static int sscape_midi_info(struct snd_kcontrol *ctl, - struct snd_ctl_elem_info *uinfo) + struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; @@ -601,7 +613,7 @@ static int sscape_midi_info(struct snd_kcontrol *ctl, } static int sscape_midi_get(struct snd_kcontrol *kctl, - struct snd_ctl_elem_value *uctl) + struct snd_ctl_elem_value *uctl) { struct snd_wss *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; @@ -615,16 +627,18 @@ static int sscape_midi_get(struct snd_kcontrol *kctl, } static int sscape_midi_put(struct snd_kcontrol *kctl, - struct snd_ctl_elem_value *uctl) + struct snd_ctl_elem_value *uctl) { struct snd_wss *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; - register struct soundscape *s = get_card_soundscape(card); + struct soundscape *s = get_card_soundscape(card); unsigned long flags; int change; + unsigned char new_val; spin_lock_irqsave(&s->lock, flags); + new_val = uctl->value.integer.value[0] & 127; /* * We need to put the board into HOST mode before we * can send any volume-changing HOST commands ... @@ -637,15 +651,16 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ - if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { + if (s->midi_vol == new_val) { change = 0; goto __skip_change; } - change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) - && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) - && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); - s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127; - __skip_change: + change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100) + && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100); + s->midi_vol = new_val; +__skip_change: /* * Take the board out of HOST mode and back into MIDI mode ... @@ -738,7 +753,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) if (s->type == SSCAPE_VIVO) wss_io += 4; - d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); /* wait for WSS codec */ @@ -762,7 +777,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) if ((inb(wss_io) & 0x80) != 0) s->type = MEDIA_FX; - d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); /* wait for WSS codec */ for (d = 0; d < 500; d++) { @@ -778,7 +793,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) */ retval = 1; - _done: +_done: spin_unlock_irqrestore(&s->lock, flags); return retval; } @@ -789,7 +804,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) * to crash the machine. Also check that someone isn't using the hardware * IOCTL device. */ -static int mpu401_open(struct snd_mpu401 * mpu) +static int mpu401_open(struct snd_mpu401 *mpu) { if (!verify_mpu401(mpu)) { snd_printk(KERN_ERR "sscape: MIDI disabled, " @@ -803,18 +818,18 @@ static int mpu401_open(struct snd_mpu401 * mpu) /* * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. */ -static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq) +static int __devinit create_mpu401(struct snd_card *card, int devnum, + unsigned long port, int irq) { struct soundscape *sscape = get_card_soundscape(card); struct snd_rawmidi *rawmidi; int err; - if ((err = snd_mpu401_uart_new(card, devnum, - MPU401_HW_MPU401, - port, MPU401_INFO_INTEGRATED, - irq, IRQF_DISABLED, - &rawmidi)) == 0) { - struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data; + err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port, + MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED, + &rawmidi); + if (err == 0) { + struct snd_mpu401 *mpu = rawmidi->private_data; mpu->open_input = mpu401_open; mpu->open_output = mpu401_open; mpu->private_data = sscape; @@ -866,19 +881,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, unsigned long flags; struct snd_pcm *pcm; -/* - * It turns out that the PLAYBACK_ENABLE bit is set - * by the lowlevel driver ... - * -#define AD1845_IFACE_CONFIG \ - (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE) - snd_wss_mce_up(chip); - spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG); - spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_wss_mce_down(chip); - */ - if (sscape->type != SSCAPE_VIVO) { /* * The input clock frequency on the SoundScape must @@ -928,7 +930,7 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, sscape->chip = chip; } - _error: +_error: return err; } @@ -1034,7 +1036,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) */ spin_lock_irqsave(&sscape->lock, flags); - sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); @@ -1055,6 +1056,10 @@ static int __devinit create_sscape(int dev, struct snd_card *card) sscape_write_unsafe(sscape->io_base, GA_CDCFG_REG, 0x09 | DMA_8BIT | (dma[dev] << 4) | (irq_cfg << 1)); + /* + * Enable the master IRQ ... + */ + sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80); spin_unlock_irqrestore(&sscape->lock, flags); @@ -1094,11 +1099,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } /* - * Enable the master IRQ ... - */ - sscape_write(sscape, GA_INTENA_REG, 0x80); - - /* * Initialize mixer */ spin_lock_irqsave(&sscape->lock, flags); @@ -1155,7 +1155,8 @@ static int __devinit snd_sscape_match(struct device *pdev, unsigned int i) mpu_irq[i] == SNDRV_AUTO_IRQ || dma[i] == SNDRV_AUTO_DMA) { printk(KERN_INFO - "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n"); + "sscape: insufficient parameters, " + "need IO, IRQ, MPU-IRQ and DMA\n"); return 0; } @@ -1183,7 +1184,8 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev) if (ret < 0) goto _release_card; - if ((ret = snd_card_register(card)) < 0) { + ret = snd_card_register(card); + if (ret < 0) { snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; } @@ -1236,20 +1238,15 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, * Allow this function to fail *quietly* if all the ISA PnP * devices were configured using module parameters instead. */ - if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS) + idx = get_next_autoindex(idx); + if (idx >= SNDRV_CARDS) return -ENOSPC; /* - * We have found a candidate ISA PnP card. Now we - * have to check that it has the devices that we - * expect it to have. - */ - - /* * Check that we still have room for another sound card ... */ dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); - if (! dev) + if (!dev) return -ENODEV; if (!pnp_is_active(dev)) { @@ -1298,7 +1295,8 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, if (ret < 0) goto _release_card; - if ((ret = snd_card_register(card)) < 0) { + ret = snd_card_register(card); + if (ret < 0) { snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; } --------------------------------------------------------------- Zapytaj wr�k�! Kliknij >>> http://link.interia.pl/f238d

2 1

[alsa-devel] [PATCH 31/31] HDA patch_via.c: Only cosmetic changes
by Li Bo 08 Oct '09

08 Oct '09

[ALSA] HDA VIA: Only cosmetic changes Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Index: sound-2.6/sound/pci/hda/patch_via.c =================================================================== --- sound-2.6.orig/sound/pci/hda/patch_via.c 2009-10-05 15:11:40.000000000 +0800 +++ sound-2.6/sound/pci/hda/patch_via.c 2009-10-05 15:11:42.000000000 +0800 @@ -22,26 +22,26 @@ */ /* * * * * * * * * * * * * * Release History * * * * * * * * * * * * * * * * */ -/* */ +/* */ /* 2006-03-03 Lydia Wang Create the basic patch to support VT1708 codec */ -/* 2006-03-14 Lydia Wang Modify hard code for some pin widget nid */ -/* 2006-08-02 Lydia Wang Add support to VT1709 codec */ +/* 2006-03-14 Lydia Wang Modify hard code for some pin widget nid */ +/* 2006-08-02 Lydia Wang Add support to VT1709 codec */ /* 2006-09-08 Lydia Wang Fix internal loopback recording source select bug */ -/* 2007-09-12 Lydia Wang Add EAPD enable during driver initialization */ -/* 2007-09-17 Lydia Wang Add VT1708B codec support */ +/* 2007-09-12 Lydia Wang Add EAPD enable during driver initialization */ +/* 2007-09-17 Lydia Wang Add VT1708B codec support */ /* 2007-11-14 Lydia Wang Add VT1708A codec HP and CD pin connect config */ /* 2008-02-03 Lydia Wang Fix Rear channels and Back channels inverse issue */ -/* 2008-03-06 Lydia Wang Add VT1702 codec and VT1708S codec support */ -/* 2008-04-09 Lydia Wang Add mute front speaker when HP plugin */ -/* 2008-04-09 Lydia Wang Add Independent HP feature */ +/* 2008-03-06 Lydia Wang Add VT1702 codec and VT1708S codec support */ +/* 2008-04-09 Lydia Wang Add mute front speaker when HP plugin */ +/* 2008-04-09 Lydia Wang Add Independent HP feature */ /* 2008-05-28 Lydia Wang Add second S/PDIF Out support for VT1702 */ -/* 2008-09-15 Logan Li Add VT1708S Mic Boost workaround/backdoor */ +/* 2008-09-15 Logan Li Add VT1708S Mic Boost workaround/backdoor */ /* 2009-02-16 Logan Li Add support for VT1718S */ /* 2009-03-13 Logan Li Add support for VT1716S */ /* 2009-04-14 Lydai Wang Add support for VT1828S and VT2020 */ /* 2009-07-08 Lydia Wang Add support for VT2002P */ /* 2009-07-21 Lydia Wang Add support for VT1812 */ -/* */ +/* */ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ @@ -455,7 +455,7 @@ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD) - snd_hda_codec_write(codec, nid, 0, + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x02); } @@ -1509,7 +1509,7 @@ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - + /* Setup default input MW0 to PW4 */ {0x20, AC_VERB_SET_CONNECT_SEL, 0}, /* PW9 Output enable */ @@ -1841,8 +1841,10 @@ codec->pcm_info = info; info->name = spec->stream_name_analog; - info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback); - info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0]; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] = + *(spec->stream_analog_playback); + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = + spec->multiout.dac_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture); info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0]; @@ -2097,7 +2099,7 @@ if (spec->slave_dig_outs[0]) codec->slave_dig_outs = spec->slave_dig_outs; - return 0; + return 0; } #ifdef CONFIG_SND_HDA_POWER_SAVE @@ -2130,8 +2132,8 @@ spec->multiout.num_dacs = cfg->line_outs; spec->multiout.dac_nids = spec->private_dac_nids; - - for(i = 0; i < 4; i++) { + + for (i = 0; i < 4; i++) { nid = cfg->line_out_pins[i]; if (nid) { /* config dac list */ @@ -2169,7 +2171,7 @@ if (!nid) continue; - + nid_vol = nid_vols[i]; if (i == AUTO_SEQ_CENLFE) { @@ -2198,7 +2200,7 @@ HDA_OUTPUT)); if (err < 0) return err; - } else if (i == AUTO_SEQ_FRONT){ + } else if (i == AUTO_SEQ_FRONT) { /* add control to mixer index 0 */ err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Master Front Playback Volume", @@ -2212,7 +2214,7 @@ HDA_INPUT)); if (err < 0) return err; - + /* add control to PW3 */ sprintf(name, "%s Playback Volume", chname[i]); err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name, @@ -2312,7 +2314,7 @@ case 0x1d: /* Mic */ idx = 2; break; - + case 0x1e: /* Line In */ idx = 3; break; @@ -2548,7 +2550,7 @@ "from BIOS. Using genenic mode...\n"); } - + spec->stream_name_analog = "VT1708 Analog"; spec->stream_analog_playback = &vt1708_pcm_analog_playback; /* disable 32bit format on VT1708 */ @@ -2560,7 +2562,7 @@ spec->stream_digital_playback = &vt1708_pcm_digital_playback; spec->stream_digital_capture = &vt1708_pcm_digital_capture; - + if (!spec->adc_nids && spec->input_mux) { spec->adc_nids = vt1708_adc_nids; spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids); @@ -2749,11 +2751,11 @@ spec->multiout.dac_nids[cfg->line_outs] = 0x28; /* AOW4 */ } else if (cfg->line_outs == 3) { /* 6 channels */ - for(i = 0; i < cfg->line_outs; i++) { + for (i = 0; i < cfg->line_outs; i++) { nid = cfg->line_out_pins[i]; if (nid) { /* config dac list */ - switch(i) { + switch (i) { case AUTO_SEQ_FRONT: /* AOW0 */ spec->multiout.dac_nids[i] = 0x10; @@ -2788,7 +2790,7 @@ for (i = 0; i <= AUTO_SEQ_SIDE; i++) { nid = cfg->line_out_pins[i]; - if (!nid) + if (!nid) continue; nid_vol = nid_vols[i]; @@ -2819,7 +2821,7 @@ HDA_OUTPUT)); if (err < 0) return err; - } else if (i == AUTO_SEQ_FRONT){ + } else if (i == AUTO_SEQ_FRONT) { /* ADD control to mixer index 0 */ err = via_add_control(spec, VIA_CTL_WIDGET_VOL, "Master Front Playback Volume", @@ -2833,7 +2835,7 @@ HDA_INPUT)); if (err < 0) return err; - + /* add control to PW3 */ sprintf(name, "%s Playback Volume", chname[i]); err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name, @@ -2929,7 +2931,7 @@ case 0x1d: /* Mic */ idx = 2; break; - + case 0x1e: /* Line In */ idx = 3; break; @@ -3038,7 +3040,7 @@ spec->stream_digital_playback = &vt1709_pcm_digital_playback; spec->stream_digital_capture = &vt1709_pcm_digital_capture; - + if (!spec->adc_nids && spec->input_mux) { spec->adc_nids = vt1709_adc_nids; spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids); @@ -3132,7 +3134,7 @@ spec->stream_digital_playback = &vt1709_pcm_digital_playback; spec->stream_digital_capture = &vt1709_pcm_digital_capture; - + if (!spec->adc_nids && spec->input_mux) { spec->adc_nids = vt1709_adc_nids; spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);

1 1

[alsa-devel] [PATCH 30/31] HDA patch_via.c: comments: update copyright, code description, changeset
by Li Bo 08 Oct '09

08 Oct '09

[ALSA] HDA VIA: comments: update copyright, code description, changeset Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Index: sound-2.6/sound/pci/hda/patch_via.c =================================================================== --- sound-2.6.orig/sound/pci/hda/patch_via.c 2009-10-05 15:14:16.000000000 +0800 +++ sound-2.6/sound/pci/hda/patch_via.c 2009-10-05 15:14:19.000000000 +0800 @@ -1,10 +1,10 @@ /* * Universal Interface for Intel High Definition Audio Codec * - * HD audio interface patch for VIA VT1702/VT1708/VT1709 codec + * HD audio interface patch for VIA VT17xx/VT20xx codec * - * Copyright (c) 2006-2008 Lydia Wang <lydiawang(a)viatech.com> - * Takashi Iwai <tiwai(a)suse.de> + * (C) 2006-2009 VIA Technology, Inc. + * (C) 2006-2008 Takashi Iwai <tiwai(a)suse.de> * * This driver is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -36,6 +36,11 @@ /* 2008-04-09 Lydia Wang Add Independent HP feature */ /* 2008-05-28 Lydia Wang Add second S/PDIF Out support for VT1702 */ /* 2008-09-15 Logan Li Add VT1708S Mic Boost workaround/backdoor */ +/* 2009-02-16 Logan Li Add support for VT1718S */ +/* 2009-03-13 Logan Li Add support for VT1716S */ +/* 2009-04-14 Lydai Wang Add support for VT1828S and VT2020 */ +/* 2009-07-08 Lydia Wang Add support for VT2002P */ +/* 2009-07-21 Lydia Wang Add support for VT1812 */ /* */ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

1 1

[alsa-devel] [PATCH 29/31] HDA patch_via.c: Change PW4 connect select default to to MW0.
by Li Bo 08 Oct '09

08 Oct '09

[ALSA] HDA VIA: Change PW4 connect select default to to MW0. According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0. , i.e. PW4 should be default to MW0. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Index: sound-2.6/sound/pci/hda/patch_via.c =================================================================== --- sound-2.6.orig/sound/pci/hda/patch_via.c 2009-10-05 15:14:10.000000000 +0800 +++ sound-2.6/sound/pci/hda/patch_via.c 2009-10-05 15:14:16.000000000 +0800 @@ -1505,8 +1505,8 @@ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* Setup default input to PW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, + /* Setup default input MW0 to PW4 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0}, /* PW9 Output enable */ {0x25, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* power down jack detect function */ @@ -2641,8 +2641,8 @@ {0x1f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* Set input of PW4 as AOW4 */ - {0x20, AC_VERB_SET_CONNECT_SEL, 0x1}, + /* Set input of PW4 as MW0 */ + {0x20, AC_VERB_SET_CONNECT_SEL, 0}, /* PW9 Output enable */ {0x24, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, { } @@ -3196,7 +3196,7 @@ {0x27, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Setup default input to PW4 */ - {0x1d, AC_VERB_SET_CONNECT_SEL, 0x1}, + {0x1d, AC_VERB_SET_CONNECT_SEL, 0}, /* PW9 Output enable */ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* PW10 Input enable */

1 1